WS-INFRA-CLUSTER-MIB
AI MIB Summary
The WS-INFRA-CLUSTER-MIB monitors and manages high-availability switch cluster states, specifically tracking automatic port adoption mechanisms, cluster license validity, and inter-switch tunneling status to ensure service continuity during node failures. This module exposes configuration parameters and operational metrics required to coordinate failover between active and standby switches while enforcing protocol state constraints for cluster management.
The Cluster module is responsible for providing a minimal interrupted service to the network in the case of a switch failure by making the other standby switch take over the un-adopted Access ports. The core functionalities of the Cluster module are as listed below: - Manage and process automatic port adoption by switch(es) in the event of network or any switch failure. - Manage the cluster license. - Act as a tunnel between the application modules of CC across the switches. All Cluster related configuration parameters (except of course wsInfraClusterEnable itself) can be modified only if Cluster Protocol is disabled.
Main OID:
wsInfraClusterMIB.1.3.6.1.4.1.388.14.1.8.1
83
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
wsInfraClusterMIBThe Cluster module is responsible for providing a minimal interrupted service to the network in the case of a switch failure by making the other standby switch take over the un-adopted Access ports. The core functionalities of the Cluster module are as listed below: - Manage and process automatic port adoption by switch(es) in the event of network or any switch failure. - Manage the cluster license. - Act as a tunnel between the application modules of CC across the switches. All Cluster related configuration parameters (except of course wsInfraClusterEnable itself) can be modified only if Cluster Protocol is disabled. MODULE-IDENTITY .1.3.6.1.4.1.388.14.1.8.1 |
wsInfraClusterSwitchIPThe IP Address of the switch in the cluster context.rw IpAddress .1.3.6.1.4.1.388.14.1.8.1.1 |
wsInfraClusterEnableEnable or disable the Cluster feature.rw Enumeration .1.3.6.1.4.1.388.14.1.8.1.2 |
wsInfraClusterModeSet the mode to either Active or Standby. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.rw Enumeration .1.3.6.1.4.1.388.14.1.8.1.3 |
wsInfraClusterIdCluster/Group id. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.rw Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.4 |
wsInfraClusterDiscoveryIntervalDuring this time switches try to discover other switches in the cluster. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.rw Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.5 |
wsInfraClusterHoldIntervalTime to announce that the neighbour switch is down if no heartbeats received during this period of time. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.rw Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.6 |
wsInfraClusterHBIntervalThe frequency in which heartbeats are sent. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.rw Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.7 |
wsInfraClusterHandleSTPWhether the STP convergence time needs to be handled or not.rw Enumeration .1.3.6.1.4.1.388.14.1.8.1.8 |
wsInfraClusterSwitchStateThe current state of the switch in the cluster.ro Enumeration .1.3.6.1.4.1.388.14.1.8.1.9 |
wsInfraClusterLicNumThe cluster license number.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.10 |
wsInfraClusterInstalledLicNumInstalled license number of the switch.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.11 |
wsInfraClusterApCntTotal number of APs adopted in the cluster by all the switches.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.12 |
wsInfraClusterVersionThe version of the Cluster Module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.13 |
wsInfraClusterHistory OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.1.8.1.14 |
wsInfraClusterHistoryTableList of history entries for the state changes of the switch. SEQUENCE OF WsInfraClusterHistoryEntry .1.3.6.1.4.1.388.14.1.8.1.14.1 |
wsInfraClusterHistoryEntryDefines an entry in the wsInfraClusterHistoryTable. WsInfraClusterHistoryEntry .1.3.6.1.4.1.388.14.1.8.1.14.1.1 |
wsInfraClusterHistoryIndexSimple Index.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.14.1.1.1 |
wsInfraClusterHistoryStateSwitch states.ro Enumeration .1.3.6.1.4.1.388.14.1.8.1.14.1.1.2 |
wsInfraClusterHistoryTimeThe time at which state change happened.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.14.1.1.3 |
wsInfraClusterHistoryEventTriggerThe event that triggered the state change.ro Enumeration .1.3.6.1.4.1.388.14.1.8.1.14.1.1.4 |
wsInfraClusterHistoryDescDescription of the event and state change reason.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.14.1.1.5 |
wsInfraClusterConfig OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.1.8.1.15 |
wsInfraClusterConfigTableThis table is used to configure the IP address of the switches in the cluster including this switch. It can be modified only if Cluster Protocol is disabled i.e. when wsInfraClusterEnable is set to 'disable'. SEQUENCE OF WsInfraClusterConfigEntry .1.3.6.1.4.1.388.14.1.8.1.15.1 |
wsInfraClusterConfigEntryDefines an entry in the wsInfraClusterConfigTable. WsInfraClusterConfigEntry .1.3.6.1.4.1.388.14.1.8.1.15.1.1 |
wsInfraClusterConfigIndexDescription.ro INTEGER .1.3.6.1.4.1.388.14.1.8.1.15.1.1.1 |
wsInfraClusterMemberIpAddrUnique IP address of the switch.ro IpAddress .1.3.6.1.4.1.388.14.1.8.1.15.1.1.2 |
wsInfraClusterCfgRowStatusSNMP row status about the configured object. The row creation fails with error status as 'Bad Value' if the Cluster Config Table already contains the max number of peers specified by the Cluster Protocol Specification.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.15.1.1.3 |
wsInfraClustertNumHBSentThe number of HeartBeats sent from this switch to a peer switch in the cluster.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.4 |
wsInfraClusterNumHBRcvdThe number of HeartBeats received from the peer switch in the cluster.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.5 |
wsInfraClusterLastSeenThe time at which the last heartbeat received from the peer switch.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.15.1.1.6 |
wsInfraClusterFirstSeenThe time at which the peer switch was first seen.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.15.1.1.7 |
wsInfraClusterNumUpdMesgSentThe number of Update Messages sent from this switch to a peer switch in the cluster.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.8 |
wsInfraClusterNumUpdMesgRecdThe number of Update Messages received from the peer switch in the cluster.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.9 |
wsInfraClusterStatusThe status of the peer switch.ro Enumeration .1.3.6.1.4.1.388.14.1.8.1.15.1.1.10 |
wsInfraClusterAdoptionCntNumber of APs adopted by the peer switch in cluster.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.11 |
wsInfraClusterSwitchModeWhether the Peer Switch's mode is primary or standby.ro Enumeration .1.3.6.1.4.1.388.14.1.8.1.15.1.1.12 |
wsInfraClusterInstalLicValueThe value of the Installed License of the peer switch.ro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.13 |
wsInfraClusterUptimeUptime of member switchro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.15.1.1.14 |
wsInfraClusterNumMusAdoptedNumber of MUs adopted by the member switchro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.15 |
wsInfraClusterNumRadiosAdoptedNumber of radios adopted by the member switchro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.16 |
wsInfraClusterNumSelfHealingRadiosNumber of radios in self healing mode in the member switchro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.17 |
wsInfraClusterNumRogueApsNumber of rogue APs detected by the member switchro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.18 |
wsInfraClusterCfgRunningImgVerVersion of the running image on the member switchro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.15.1.1.19 |
wsInfraClusterCfgPortAdoptionCapacityPort adoption capacity of the member switchro Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.1.1.20 |
wsInfraClusterPeerStatTableStatistics about different switches in the cluster.obsolete SEQUENCE OF WsInfraClusterPeerStatEntry .1.3.6.1.4.1.388.14.1.8.1.15.2 |
wsInfraClusterPeerStatEntryDefines an entry in the wsInfraClusterPeerStatTable.obsolete WsInfraClusterPeerStatEntry .1.3.6.1.4.1.388.14.1.8.1.15.2.1 |
wsInfraClusterStatNumHBSentThe number of HeartBeats sent from this switch to a peer switch in the cluster.roobsolete Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.15.2.1.1 |
wsInfraClusterUpAndFullyConnectedIndicates if cluster is up and fully connectedro Enumeration .1.3.6.1.4.1.388.14.1.8.1.16 |
wsInfraClusterTotalApsAdoptedTotal number of APs adopted by the clusterro Integer32 .1.3.6.1.4.1.388.14.1.8.1.17 |
wsInfraClusterTotalRadiosAdoptedTotal number of radios adopted by the clusterro Integer32 .1.3.6.1.4.1.388.14.1.8.1.18 |
wsInfraClusterTotalMusAssociatedTotal number of MUs adopted by the clusterro Integer32 .1.3.6.1.4.1.388.14.1.8.1.19 |
wsInfraClusterTotalRogueApsTotal number of rogue APs detected by the clusterro Integer32 .1.3.6.1.4.1.388.14.1.8.1.20 |
wsInfraClusterTotalPortAdoptionCapacityTotal port adoption capacity of the clusterro Integer32 .1.3.6.1.4.1.388.14.1.8.1.21 |
wsInfraClusterTotalSelfHealingRadiosTotal number of radios in self healing mode in the clusterro Integer32 .1.3.6.1.4.1.388.14.1.8.1.22 |
wsInfraClusterMusAdoptedCntNumber of MUs adopted by the switchro Integer32 .1.3.6.1.4.1.388.14.1.8.1.23 |
wsInfraClusterRadiosAdoptedCntNumber of radios adopted by the switchro Integer32 .1.3.6.1.4.1.388.14.1.8.1.24 |
wsInfraClusterSelfHealingRadioCntNumber of radios in self healing mode in the switchro Integer32 .1.3.6.1.4.1.388.14.1.8.1.25 |
wsInfraClusterRogueApCntNumber of rogue APs detected by the switchro Integer32 .1.3.6.1.4.1.388.14.1.8.1.26 |
wsInfraClusterRunningImgVerVersion of the running image on the switchro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.27 |
wsInfraClusterPortAdoptionCapacityPort adoption capacity of the switchro Integer32 .1.3.6.1.4.1.388.14.1.8.1.28 |
wsInfraClusterAutoRevertEnable or disable automatic revert. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.rw Enumeration .1.3.6.1.4.1.388.14.1.8.1.29 |
wsInfraClusterAutoRevertDelayAuto-revert delay (in minutes - ranging from 1 to 1800). This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.rw Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.30 |
wsInfraClusterManualRevertSet manual revertrw Enumeration .1.3.6.1.4.1.388.14.1.8.1.31 |
wsInfraClusterDhcpRedundancyEnable or disable the DHCP redundancy feature. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.rw Enumeration .1.3.6.1.4.1.388.14.1.8.1.32 |
wsInfraClusterActiveDhcpServerSwitchIP address of the switch running the active DHCP server. Other values this field could take are: NotApplicable - when redundancy is disabled. Unknown - when at any given time if there is no active DHCP server switch or the current switch is not participating in DHCP redundancy.ro DisplayString .1.3.6.1.4.1.388.14.1.8.1.33 |
wsInfraClusterResetActiveDhcpServerReset the active DHCP server. If the current switch is running active DHCP server, then the DHCP server will be reset. Otherwise, this action will be ignored.rw Enumeration .1.3.6.1.4.1.388.14.1.8.1.34 |
wsInfraCriticalResourceIpIP address of the Critical Resource for the cluster switches. This object can not be set when Cluster feature is enabled. Disable the Cluster feature using wsInfraClusterEnable before setting this object.rw IpAddress .1.3.6.1.4.1.388.14.1.8.1.35 |
wsInfraClusterDynApLoadBal OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.1.8.1.36 |
wsInfraClusterDynApLoadBalEnableEnable or disable dynamic AP load balance feature. Default is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.36.1 |
wsInfraClusterDynApLoadBalApproachThis determines whether to the trigger dynamic AP load balance on scheduled time or immediately when AP imbalance is detected.rw Enumeration .1.3.6.1.4.1.388.14.1.8.1.36.2 |
wsInfraClusterDynApLoadBalSched OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.1.8.1.36.3 |
wsInfraClusterDynApLoadBalSchedStartTimeIf trigger for dynamic AP load balance is scheduled time then this configuration parameter determines the start time to initiate dynamic AP load balance.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.388.14.1.8.1.36.3.1 |
wsInfraClusterDynApLoadBalSchedIntervalIf trigger for dynamic AP load balance is scheduled time then this configuration parameter determines the interval or frequency at which dynamic AP load balance will be triggered. Default value is 1 day.rw Unsigned32 .1.3.6.1.4.1.388.14.1.8.1.36.3.2 |
wsInfraClusterDynApLoadBalStartCommand to initiate dynamic AP load balance.rw DoActionNow .1.3.6.1.4.1.388.14.1.8.1.36.4 |
wsInfraClusterDynApLoadBalMUThrshldThis specifies per AP MU threshold value. If AP associated MU count is equal to or greater than this threshold value then AP will not be reset. It also depends on trigger for dynamic AP load balance. Default value is 32 MUs.rw INTEGER .1.3.6.1.4.1.388.14.1.8.1.36.5 |
wsInfraClusterLicensingAlgorithmSet the redundancy licensing algorithm to either Max or Aggregation. This object can not be set when Redundancy feature is enabled. Disable the Redundancy feature using wsInfraClusterEnable before setting this object.rw Enumeration .1.3.6.1.4.1.388.14.1.8.1.37 |
wsInfrastructureMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.1.8.1.100 |
wsInfrastructureMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.1.8.1.100.1 |
wsInfrastructureMIBComplianceDescription. Unknown .1.3.6.1.4.1.388.14.1.8.1.100.1.1 |
wsInfrastructureMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.1.8.1.100.2 |
wsInfrastructureMIBGroupDescription. Unknown .1.3.6.1.4.1.388.14.1.8.1.100.2.1 |
wsInfrastructureMIBObsoleteGroupDescription.obsolete Unknown .1.3.6.1.4.1.388.14.1.8.1.100.2.2 |