WHISP-PLV-GATEWAY-MIB
AI MIB Summary
The WHISP-PLV-GATEWAY-MIB module provides SNMP management capabilities for WHISP PLV gateway hardware, enabling the monitoring of gateway operational status, interface statistics, and session state metrics. This module facilitates the collection of performance counters and alarm conditions specific to the PLV gateway's data plane and control plane functions.
Initial Version.
Main OID:
whispPlvGatewayMIB.1.3.6.1.4.1.161.19.3.8.1
174
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
174 total| Object Name |
|---|
whispPlvGatewayMIBInitial Version. MODULE-IDENTITY .1.3.6.1.4.1.161.19.3.8.1 |
whispPlvGatewayObjects OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.1 |
whispPlvGwInfo OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.1.1 |
gwInfoModelThis object indicates the Gateway Model Number.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.1.1 |
gwInfoSerialNumberThis object indicates the Gateway Serial Number.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.1.2 |
gwInfoLanMacThis object indicates the Gateway's LAN port MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.8.1.1.1.3 |
gwInfoWanMacThis object indicates the Gateway's WAN port MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.8.1.1.1.4 |
gwInfoPlcMacThis object indicates the Gateway PLC MAC Addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.8.1.1.1.5 |
gwInfoHardwareVerThis object indicates the Gateway Hardware Version.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.1.6 |
gwInfoDevFirmwareVerThis object indicates the Gateway Device Firmware Version.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.1.7 |
gwInfoLoaderVerThis object indicates the Gateway Loader Version.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.1.8 |
gwInfoSimFirmwareVerThis object indicates the Intellon Simple Module Firmware Version.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.1.9 |
gwInfoModemCountThis object indicates the number of Modems registered to the Gateway.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.1.10 |
gwInfoDeviceUpgradeStatusThis object indicates the Gateway Last Software Upgrade Status. 0 - Upgrade not started 1 - Upgrade in progress 2 - Last Upgrade failed 3 - Last Upgrade was successful.ro Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.1.11 |
gwInfoSimUpgradeStatusThis object indicates the Intellon Simple Module's last Software Upgrade Status. 0 - Upgrade not started 1 - Upgrade in progress 2 - Last Upgrade failed 3 - Last Upgrade was successful.ro Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.1.12 |
gwInfoTemperatureThis object indicates the ambient temperature of the Gateway.ro Integer32 UNITS "Degrees Centigrade." .1.3.6.1.4.1.161.19.3.8.1.1.1.13 |
whispPlvGwConfig OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.1.2 |
gwConfNtpConfigThis object is used to Enable or Disable the Gateway to set it's system clock using NTP.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.2.1 |
gwConfNtpServerThis object is used to configure the NTP Server.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.2.2 |
gwConfTimeThis object is used to configure Gateway's system clock time. The input format is HH:MM::SS. This object is accessible only if gwConfNtpConfig is disabled.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.2.3 |
gwConfDateThis object is used to configure Gateway's system clock date. The input format is YYYY/MM/DD. This object is accessible only if gwConfNtpConfig is disabled.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.2.4 |
gwConfModemTableTimeoutThis object is used to configure the Modem Table Timeout. Any Inactive Modem will be deleted from the Modem table, if it is inactive for a period more than the timeout value.rw Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.2.5 |
gwConfAutoLogoutTimeThis object is used to configure the Gateway Auto Logout Time. User will be logged out of the Gateway's web interface, if there is inactivity for a period more than the Auto Logout Time.rw Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.2.6 |
gwConfPSDThis object indicates the Power Spectral Density of the signal, at all the 84 carriers, that the device transmits. Starting at the left most octet, which represents the spectral value at channel number 0, each octet represents the spectral value at the corresponding channel number. The channel numbers 4, 5, 13, 14, 29, 49, 50, 51, 69 and 70 are masked and their spectral values cannot be changed.rw OCTET STRING .1.3.6.1.4.1.161.19.3.8.1.1.2.7 |
whispPlvGwTrapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.1.3 |
gwConfTrapIp1This object is used to configure IP Address of SNMP Trap Client #1.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.1 |
gwConfTrapCommStr1This object is used to configure SNMP Community string for Trap Client #1.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.2 |
gwConfTrapIp2This object is used to configure IP Address of SNMP Trap Client #2.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.3 |
gwConfTrapCommStr2This object is used to configure SNMP Community string for Trap Client #2.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.4 |
gwConfTrapIp3This object is used to configure IP Address of SNMP Trap Client #3.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.5 |
gwConfTrapCommStr3This object is used to configure SNMP Community string for Trap Client #3.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.6 |
gwConfTrapIp4This object is used to configure IP Address of SNMP Trap Client #4.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.7 |
gwConfTrapCommStr4This object is used to configure SNMP Community string for Trap Client #4.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.8 |
gwConfTrapIp5This object is used to configure IP Address of SNMP Trap Client #5.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.9 |
gwConfTrapCommStr5This object is used to configure SNMP Community string for Trap Client #5.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.10 |
gwConfTrapIp6This object is used to configure IP Address of SNMP Trap Client #6.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.11 |
gwConfTrapCommStr6This object is used to configure SNMP Community string for Trap Client #6.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.12 |
gwConfTrapIp7This object is used to configure IP Address of SNMP Trap Client #7.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.13 |
gwConfTrapCommStr7This object is used to configure SNMP Community string for Trap Client #7.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.14 |
gwConfTrapIp8This object is used to configure IP Address of SNMP Trap Client #8.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.15 |
gwConfTrapCommStr8This object is used to configure SNMP Community string for Trap Client #8.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.16 |
gwConfTrapIp9This object is used to configure IP Address of SNMP Trap Client #9.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.17 |
gwConfTrapCommStr9This object is used to configure SNMP Community string for Trap Client #9.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.18 |
gwConfTrapIp10This object is used to configure IP Address of SNMP Trap Client #10.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.3.19 |
gwConfTrapCommStr10This object is used to configure SNMP Community string for Trap Client #10.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.3.20 |
whispPlvGwPwrLnStats OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.1.4 |
gwPwrLnMaxDelayThis object indicates the Maximum transfer delay on Powerline.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.4.1 |
gwPwrLnTxAckThis object indicates the Powerline Transmit ACK count.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.4.2 |
gwPwrLnTxNakThis object indicates the Powerline Transmit NACK count.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.4.3 |
gwPwrLnTxFailThis object indicates the Powerline Transmission Failures.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.4.4 |
gwPwrLnTxCollThis object indicates the Powerline Transmission Collisions.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.4.5 |
gwPwrLnTxCarrLossThis object indicates the Powerline Transmt Carrier Loss Detection.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.4.6 |
gwPwrLnRoboByte40This object indicates the raw value of channel capacity as reported by Intellon PHYro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.4.7 |
gwPwrLnRoboFailsThis object indicates the Powerline protocol receive failures, in ROBO mode.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.4.8 |
gwPwrLnRoboDropsThis object indicates the Powerline protocol transmit drops, in ROBO mode.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.4.9 |
whispPlvGwAdmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.1.5 |
gwAdmConfLoginUsernameThis object is used to configure Gateway's System Management Login Username.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.1 |
gwAdmConfLoginPasswordThis object is used to configure Gateway's System Management Login Password.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.2 |
gwAdmConfNEKThis object is used to configure Network Encryption Key of the Gateway.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.3 |
gwAdmConfAuthServIp1This object is used to configure BAM Server #1 IP Address.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.5.4 |
gwAdmConfAuthServIp2This object is used to configure BAM Server #2 IP Address.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.5.5 |
gwAdmConfAuthServIp3This object is used to configure BAM Server #3 IP Address.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.5.6 |
gwAdmConfAuthModeThis object is used to Enable or Disable BAM Authentication on the Gateway.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.5.7 |
gwAdmConfAuthKeyThis object is used to configure Authentication Key, to use with BAM Server, on the Gateway.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.8 |
gwAdmConfAuthKeyOptionThis object is used to configure the Authentication Key to be used, on the Gateway.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.5.9 |
gwAdmConfSnmpGetCommStrThis object is used to configure SNMP 'Read' community string of the Gateway.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.10 |
gwAdmConfSnmpSetCommStrThis object is used to configure SNMP 'Read-Write' community string of the Gateway.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.11 |
gwAdmConfSnmpAdminCommStrThis object is used to configure SNMP 'Admin' community string of the Gateway.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.12 |
gwAdmConfFtpServerIpThis object is used to configure IP Address of FTP server hosting auto-upgrade files.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.5.13 |
gwAdmConfFtpUsernameThis object is used to configure Username to login to a FTP server, for use with FTP-based auto-upgrade.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.14 |
gwAdmConfFtpPasswordThis object is used to configure Password to login to a FTP server, for use with FTP-based auto-upgrade.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.15 |
gwAdmConfFtpFileThis object is used to configure Path and/or Filename of the firmware file, for use with FTP-based auto-upgrade.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.5.16 |
gwAdmConfDeviceUpgradeStartThis object is used to Start Device Firmware Upgrade process in the Gateway. To start the upgrade process, this object should be set to '1'.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.5.17 |
gwAdmConfSimUpgradeStartThis object is used to start Intellon Simple Module Firmware Upgrade process in the Gateway. To start the upgrade process, this object should be set to '1'.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.5.18 |
gwAdmConfSystemRebootThis object is used to Reboot the Gateway. To reboot the Gateway, this object should be set to '1'.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.5.19 |
gwAdmConfResetThis object is used to reset the Gateway configuration to Factory Defaults. To reset the Gateway configuration to factory defaults, this object should be set to '1'.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.5.20 |
gwAdmConfDeviceModeThis object is used to configure the device in 'switch' mode or 'NAT' mode.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.5.21 |
gwAdmConfLUIDStartThis object is used to configure the starting value of the Modem LUID range. This value should not be greater than gwAdmConfLUIDEnd valuerw Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.5.22 |
gwAdmConfLUIDEndThis object is used to configure the ending value of the Modem LUID range. This value should not be less than gwAdmConfLUIDStart valuerw Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.5.23 |
gwAdmConfVLANPassthroughStatusThis object is used to enable or disable VLAN Passthrough feature.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.5.24 |
gwAdmConfManagementVLANIdThis object is used to enable or disable VLAN Passthrough feature.rw Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.5.25 |
whispPlvGwAdmLanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.1.6 |
gwAdmConfLanConfigThis object is used to Enable or Disable DHCP client.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.6.1 |
gwAdmConfLanIpThis object is used to configure LAN IP Address.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.6.2 |
gwAdmConfLanSubnetMaskThis object is used to configure LAN IP Subnet Mask.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.6.3 |
gwAdmConfLanGatewayIpThis object is used to configure Gateway IP Address.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.6.4 |
whispPlvGwAdmSnmpAcessConfig OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.1.7 |
gwAdmSnmpAccessIpNetwork1This object is used to configure SNMP Access Network Address #1.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.1 |
gwAdmSnmpAccessIpNetworkMask1This object is used to configure SNMP Access Network Address Mask #1.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.2 |
gwAdmSnmpAccessIpNetwork2This object is used to configure SNMP Access Network Address #2.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.3 |
gwAdmSnmpAccessIpNetworkMask2This object is used to configure SNMP Access Network Address Mask #2.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.4 |
gwAdmSnmpAccessIpNetwork3This object is used to configure SNMP Access Network Address #3.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.5 |
gwAdmSnmpAccessIpNetworkMask3This object is used to configure SNMP Access Network Address Mask #3.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.6 |
gwAdmSnmpAccessIpNetwork4This object is used to configure SNMP Access Network Address #4.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.7 |
gwAdmSnmpAccessIpNetworkMask4This object is used to configure SNMP Access Network Address Mask #4.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.8 |
gwAdmSnmpAccessIpNetwork5This object is used to configure SNMP Access Network Address #5.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.9 |
gwAdmSnmpAccessIpNetworkMask5This object is used to configure SNMP Access Network Address Mask #5.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.10 |
gwAdmSnmpAccessIpNetwork6This object is used to configure SNMP Access Network Address #6.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.11 |
gwAdmSnmpAccessIpNetworkMask6This object is used to configure SNMP Access Network Address Mask #6.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.12 |
gwAdmSnmpAccessIpNetwork7This object is used to configure SNMP Access Network Address #7.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.13 |
gwAdmSnmpAccessIpNetworkMask7This object is used to configure SNMP Access Network Address Mask #7.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.14 |
gwAdmSnmpAccessIpNetwork8This object is used to configure SNMP Access Network Address #8.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.15 |
gwAdmSnmpAccessIpNetworkMask8This object is used to configure SNMP Access Network Address Mask #8.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.16 |
gwAdmSnmpAccessIpNetwork9This object is used to configure SNMP Access Network Address #9.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.17 |
gwAdmSnmpAccessIpNetworkMask9This object is used to configure SNMP Access Network Address Mask #9.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.18 |
gwAdmSnmpAccessIpNetwork10This object is used to configure SNMP Access Network Address #10.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.19 |
gwAdmSnmpAccessIpNetworkMask10This object is used to configure SNMP Access Network Address Mask #10.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.7.20 |
whispPlvGwAdmWanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.1.8 |
gwAdmWConfWanConfigThis object is used to configure the WAN Type. This object is accessible only if the Gateway is in NAT mode.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.8.1 |
gwAdmWConfWanIpThis object is used to configure WAN IP Address of the Gateway. This object is accessible only if the Gateway is in NAT mode.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.8.2 |
gwAdmWConfSubnetMaskThis object is used to configure WAN IP Subnet Mask of the Gateway. This object is accessible only if the Gateway is in NAT mode.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.8.3 |
gwAdmWConfGatewayThis object is used to configure Default Gateway IP of the Gateway. This object is accessible only if the Gateway is in NAT mode.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.8.4 |
gwAdmWConfDNS1This object is used to configure DNS Server #1. This object is accessible only if the Gateway is in NAT mode.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.8.5 |
gwAdmWConfDNS2This object is used to configure DNS Server #2. This object is accessible only if the Gateway is in NAT mode.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.8.6 |
gwAdmWConfPppoeUsernameThis object is used to configure PPPoE Username. This object is accessible only if the Gateway is in NAT mode.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.8.7 |
gwAdmWConfPppoePasswordThis object is used to configure PPPoE Password. This object is accessible only if the Gateway is in NAT mode.rw DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.8.8 |
gwAdmWConfDhcpConfigThis object is used to Enable or Disable DHCP Server. This object is accessible only if the Gateway is in NAT mode.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.8.9 |
gwAdmWConfDhcpStartIpThis object is used to configure Starting Address of the IP address block, that the DHCP Server can assign to its clients. This object is accessible only if the Gateway is in NAT mode.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.8.10 |
gwAdmWConfDhcpEndIpThis object is used to configure Last Address of the IP address block, that the DHCP Server can assign to its clients. This object is accessible only if the Gateway is in NAT mode.rw IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.8.11 |
gwAdmWConfDhcpLeaseTimeThis object is used to configure time period for which the IP address assigned to a client is valid. This object is accessible only if the Gateway is in NAT mode.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.8.12 |
gwAdmWConfUpnpConfigThis object is used to Enable or Disable the UPnP in the Gateway. This object is accessible only if the Gateway is in NAT mode.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.8.13 |
gwAdmWConfFirewallConfigThis object is used to Enable or Disable Firewall in the Gateway. This object is accessible only if the Gateway is in NAT mode.rw Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.8.14 |
whispPlvGwModemTableThis table contains one row per Modem registered to the Gateway. SEQUENCE OF WhispPlvGwModemEntry .1.3.6.1.4.1.161.19.3.8.1.1.9 |
whispPlvGwModemEntryInformation about a particular Modem registered to the Gateway. WhispPlvGwModemEntry .1.3.6.1.4.1.161.19.3.8.1.1.9.1 |
gwModemLUIDThis object indicates the unique value assigned by the Gateway, to each Modem.ro WhispLUID (WHISP-TC-MIB) .1.3.6.1.4.1.161.19.3.8.1.1.9.1.1 |
gwModemDescrThe value of this object should be same as the object 'sysName' of the Device registered to the Gateway.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.9.1.2 |
gwModemPhysAddressThis object indicates the PLC MAC Address of the Modem.ro WhispMACAddress (WHISP-TC-MIB) .1.3.6.1.4.1.161.19.3.8.1.1.9.1.3 |
gwModemIPThis object indicates the IP Address of the Modem.ro IpAddress .1.3.6.1.4.1.161.19.3.8.1.1.9.1.4 |
gwModemHardwareVersionThis object indicates the Hardware Version of the Modem.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.9.1.5 |
gwModemSoftwareVersionThis object indicates the Software Version of the Modem.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.9.1.6 |
gwModemSoftwareBootVersionThis object indicates the Boot Loader Version of the Modem.ro DisplayString .1.3.6.1.4.1.161.19.3.8.1.1.9.1.7 |
gwModemSessStateThis object indicates the current Operational state of the Modem. 0 = Idle 1 = In Session 2 = Clearing 3 = Re-registration downlink reset 4 = Authentication Challenge 5 = Registering 6 = Not in use.ro Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.9.1.8 |
gwModemsessionCountThis object indicates the number of times the Modem is In and Out of session.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.9 |
gwModemMtuThis object indicates the size of the largest datagram that can be sent and received by the Modem, in octets.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.10 |
gwModemSpeedThis object indicates an estimate of Modem's current bandwidth, in Mbps.ro Gauge32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.11 |
gwModemInOctetsThis object indicates the octets received by the Modem over Powerline, including framing characters. to each Modem.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.12 |
gwModemInUcastPktsThis object indicates the number of subnetwork-unicast packets delivered to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.13 |
gwModemInNUcastPktsThis object indicates the number of subnetwork-broadcast and subnetwork-multiicast packets delivered to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.14 |
gwModemInDiscardsThis object indicates the number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.15 |
gwModemInErrorThis object indicates the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.16 |
gwModemInUnknownProtosThis object indicates the number of packets received, but were discarded because of an unknown or unsupported protocol.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.17 |
gwModemOutOctetsThis object indicates the total number of octets transmitted, including the framing characters.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.18 |
gwModemOutUcastPktsThis object indicates the total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.19 |
gwModemOutNUcastPktsThis object indicates the total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.20 |
gwModemOutDiscardsThis object indicates the number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.21 |
gwModemOutErrorThis object indicates the number of outbound packets that could not be transmitted because of errors.ro Counter32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.22 |
gwModemOutQLenThis object indicates the number of packets in output packet queue.ro Gauge32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.23 |
gwModemRoboByte40This object indicates the current channel receive capacity of the Modem.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.24 |
gwModemRoboFailsThis object indicates the Powerline link receive failures of the Modem.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.25 |
gwModemRoboDropsThis object indicates the Powerline link send failures of the Modem.ro Integer32 .1.3.6.1.4.1.161.19.3.8.1.1.9.1.26 |
gwModemDeviceTypeThis object indicates the Type of the Device registered to the Gateway 0 = Modem 1 = Repeater 2 = Otherro Enumeration .1.3.6.1.4.1.161.19.3.8.1.1.9.1.27 |
gwModemPSDThis object indicates the Software Version of the Modem.ro OCTET STRING .1.3.6.1.4.1.161.19.3.8.1.1.9.1.28 |
whispPlvGatewayEvents OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.2 |
gwTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.2.0 |
gwTrapRegCompleteThis Notification is generated if the Modem has successfully registered to the Gateway. NOTIFICATION-TYPE .1.3.6.1.4.1.161.19.3.8.1.2.0.1 |
gwTrapRegLostThis Notification is generated if the Modem entry is removed from the Gateway's Modem Table, after being inactive for a period more than 'gwConfModemTableTimeout' value. NOTIFICATION-TYPE .1.3.6.1.4.1.161.19.3.8.1.2.0.2 |
gwTrapDeviceUpgradeStartedThis Notification is generated if the Gateway has started the Device Firmware Upgrade process. NOTIFICATION-TYPE .1.3.6.1.4.1.161.19.3.8.1.2.0.3 |
gwTrapDeviceUpgradeCompletedThis Notification is generated once the Device Firmware Upgrade process is completed. NOTIFICATION-TYPE .1.3.6.1.4.1.161.19.3.8.1.2.0.4 |
gwTrapSimUpgradeStartedThis Notification is generated if the Gateway has started the Simple Module Firmware Upgrade process. NOTIFICATION-TYPE .1.3.6.1.4.1.161.19.3.8.1.2.0.5 |
gwTrapSimUpgradeCompletedThis Notification is generated once the Simple Module Firmware Upgrade process is completed. NOTIFICATION-TYPE .1.3.6.1.4.1.161.19.3.8.1.2.0.6 |
whispPlvGatewayConformance OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.3 |
whispPlvGatewayGroups OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.3.1 |
whispPlvGatewayInfoGroupThe collection of objects that indicates Gateway device information. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.1 |
whispPlvGatewayConfigGroupThe collection of objects used to configure the Gateway. These objects are accessible to everyone. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.2 |
whispPlvGatewayTrapConfigGroupThe collection of Gateway's SNMP Trap Configuration objects. These objects are accessible to everyone. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.3 |
whispPlvGatewayPowerlineGroupThe collection of Gateway's Powerline Statistics These objects are accessible to everyone. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.4 |
whispPlvGatewayAdmConfigGroupThe collection of objects that are used to configure the Gateway. These objects are accessible only thru 'admin' community string. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.5 |
whispPlvGatewayAdmLanConfigGroupThe collection of Gateway's LAN configuration objects. These objects are accessible only thru 'admin' community string. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.6 |
whispPlvGatewayAdmSnmpAccessConfigGroupThe collection of objects that are used to configure the Gateway. These objects are accessible only thru 'admin' community string. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.7 |
whispPlvGatewayAdmWanConfigGroupThe collection of Gateway's WAN configuration objects. These objects are accessible only thru 'admin' community string. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.8 |
whispPlvGatewayAdmModemGroupThe collection of objects that gives information of the Modems connected to the Gateway. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.9 |
whispPlvGatewayNotificationsGroupThe collection of Notifications generated by the Gateway. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.1.10 |
whispPlvGatewayCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.8.1.3.2 |
whispPlvGatewayComplianceThe compliance statement of SNMP entities which implement the WHISP-PLV-GATEWAY-MIB. Unknown .1.3.6.1.4.1.161.19.3.8.1.3.2.1 |