CMM4-MIB
AI MIB Summary
The CMM4-MIB provides SNMP management definitions for Cisco Catalyst 4000/4500 series Modular Multilayer Switches, specifically enabling monitoring of the Chassis Management Module (CMM) hardware status, power supply states, fan tray health, and system temperature sensors.
This module contains CMM4 MIB definitions.
Main OID:
cmm4MibModule.1.3.6.1.4.1.161.19.1.1.15
114
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
114 total| Object Name |
|---|
cmm4MibModuleThis module contains CMM4 MIB definitions. MODULE-IDENTITY .1.3.6.1.4.1.161.19.1.1.15 |
cmm4Groups OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.6.1 |
cmm4PortCfgGroupCMM4 Port Configuration Table. Unknown .1.3.6.1.4.1.161.19.3.6.1.1 |
cmm4ConfigGroupCMM4 configuration group. Unknown .1.3.6.1.4.1.161.19.3.6.1.2 |
cmm4PortStatusGroupCMM4 Port Configuration Status Table. Unknown .1.3.6.1.4.1.161.19.3.6.1.3 |
cmm4StatusGroupCMM4 Status group. Unknown .1.3.6.1.4.1.161.19.3.6.1.4 |
cmm4GPSGroupCMM4 GPS status group. Unknown .1.3.6.1.4.1.161.19.3.6.1.5 |
cmm4ControlsGroupCMM4 Controls group. Unknown .1.3.6.1.4.1.161.19.3.6.1.6 |
cmm4SNMPGroupCMM4 SNMP group. Unknown .1.3.6.1.4.1.161.19.3.6.1.7 |
cmm4UserTableGroupCMM4 User Information Table group. Unknown .1.3.6.1.4.1.161.19.3.6.1.8 |
cmm4Config OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.6.2 |
gpsTimingPulse(1) -- Master. (0) -- Slave.rw Enumeration .1.3.6.1.4.1.161.19.3.6.2.1 |
lan1IpLAN 1 IP addressrw IpAddress .1.3.6.1.4.1.161.19.3.6.2.2 |
lan1SubnetMaskLAN 1 subnet mask.rw IpAddress .1.3.6.1.4.1.161.19.3.6.2.3 |
defaultGatewayDefault gatewayrw IpAddress .1.3.6.1.4.1.161.19.3.6.2.4 |
cmm4WebAutoUpdateWeb page auto update in seconds. 0 means disabled.rw INTEGER UNITS "Seconds" .1.3.6.1.4.1.161.19.3.6.2.5 |
cmm4ExtEthPowerResetResets power to external ethernet switch. (0) Reset Complete. (1) Reset Switch.rw Enumeration .1.3.6.1.4.1.161.19.3.6.2.6 |
cmm4PortCfgTableA list of CMM 4 port configuration entries. SEQUENCE OF Cmm4PortCfgEntry .1.3.6.1.4.1.161.19.3.6.2.7 |
cmm4PortCfgEntryA CMM4 port entry containing objects with port status. Cmm4PortCfgEntry .1.3.6.1.4.1.161.19.3.6.2.7.1 |
portCfgIndexA unique value for each CMM port.ro INTEGER .1.3.6.1.4.1.161.19.3.6.2.7.1.1 |
cmm4PortTextPort Description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.2.7.1.2 |
cmm4PortDevTypeType of Device configured for each port.rw Enumeration .1.3.6.1.4.1.161.19.3.6.2.7.1.3 |
cmm4PortPowerCfgPort power status indicates power on or power off.rw Enumeration .1.3.6.1.4.1.161.19.3.6.2.7.1.4 |
cmm4PortResetCfgReset power to port if and only if port is currently powered.rw Enumeration .1.3.6.1.4.1.161.19.3.6.2.7.1.5 |
cmm4IpAccessFilterIP Access filtering. (0) Filtering Disabled - All IPs will be allowed access. (1) Filtering Enabled - Only allow IPs in the allowed access list.rw Enumeration .1.3.6.1.4.1.161.19.3.6.2.8 |
cmm4IpAccess1IP Access list entry 1.rw IpAddress .1.3.6.1.4.1.161.19.3.6.2.9 |
cmm4IpAccess2IP Access list entry 2.rw IpAddress .1.3.6.1.4.1.161.19.3.6.2.10 |
cmm4IpAccess3IP Access list entry 3.rw IpAddress .1.3.6.1.4.1.161.19.3.6.2.11 |
cmm4MgmtPortSpeedManagement Port Speed Configuration. (1) autoNegotiate - Auto negotiate to best speed and duplex setting. (2) force10Half - Set port to 10 Mbit/s half-duplex. (3) force10Full - Set port to 10 Mbit/s full-duplex. (4) force100Half - Set port to 100 Mbit/s half-duplex. (5) force100Full - Set port to 100 Mbit/s full-duplex.rw Enumeration .1.3.6.1.4.1.161.19.3.6.2.12 |
cmm4NTPServerIpIP address for NTP server for CMM4 GPS Slave.rw IpAddress .1.3.6.1.4.1.161.19.3.6.2.13 |
sessionTimeoutTimer for Telnet, Web and FTP sessions.rw INTEGER .1.3.6.1.4.1.161.19.3.6.2.14 |
vlanEnableTo enable or disable VLAN taggingrw Enumeration .1.3.6.1.4.1.161.19.3.6.2.15 |
managementVIDManagement VLAN VIDrw INTEGER .1.3.6.1.4.1.161.19.3.6.2.16 |
siteInfoViewableEnable non login users the ability to view Site Informationrw Enumeration .1.3.6.1.4.1.161.19.3.6.2.17 |
cmm4Status OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.6.3 |
cmm4PortStatusTableA list of Live CMM 4 port status entries. SEQUENCE OF Cmm4PortStatusEntry .1.3.6.1.4.1.161.19.3.6.3.1 |
cmm4PortStatusEntryA CMM4 port entry containing port status. Cmm4PortStatusEntry .1.3.6.1.4.1.161.19.3.6.3.1.1 |
portStatusIndexA unique value for each CMM port.ro INTEGER .1.3.6.1.4.1.161.19.3.6.3.1.1.1 |
cmm4PortPowerStatusPort power status indicates power on, off or Power over Ethernet fault.ro Enumeration .1.3.6.1.4.1.161.19.3.6.3.1.1.4 |
deviceTypeA textual string containing information about device type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.2 |
cmm4pldVersionVersion of CMM4 PLD code.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.3 |
cmm4SoftwareVersionCMM4 software version. It includes the operating system and software build time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.4 |
cmm4SystemTimeThe current time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.5 |
cmm4UpTimeTime since last system reboot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.6 |
satellitesVisibleNumber of satellites the GPS sees.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.7 |
satellitesTrackedCurrent number of satellites that GPS actually tracks.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.8 |
latitudeCMM4 latitude.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.9 |
longitudeCMM4 longitude.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.10 |
heightThe height of CMM4 unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.11 |
trackingModeCMM4 GPS tracking mode.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.12 |
syncStatusCMM4 GPS sync pulse status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.13 |
cmm4MacAddressMAC address of the unit.ro WhispMACAddress (WHISP-TCV2-MIB) .1.3.6.1.4.1.161.19.3.6.3.14 |
cmm4ExtEthPwrStatCurrent Live value of external Ethernet switch power.ro Enumeration .1.3.6.1.4.1.161.19.3.6.3.15 |
cmm4FPGAVersionCMM4 FPGA Version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.16 |
cmm4FPGAPlatformCMM4 FPGA Revision.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.3.17 |
defaultStatusCurrent Status of the Default Plug and switch. If either is active the next boot will be a default boot. 0: None, Default Plug not inserted, Default Switch not active 1: Plug inserted 2: Switch Active 3: Plug inserted and Switch activero Enumeration .1.3.6.1.4.1.161.19.3.6.3.18 |
cmm4Gps OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.6.4 |
gpsTrackingModeCMM4 GPS tracking mode.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.1 |
gpsTimeCMM4 GPS time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.2 |
gpsDateCMM4 GPS date.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.3 |
gpsSatellitesVisibleNumber of satellites the GPS seesro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.4 |
gpsSatellitesTrackedCurrent number of satellites GPS is tracking.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.5 |
gpsHeightCMM4 height.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.6 |
gpsAntennaConnectionAntenna Connection status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.7 |
gpsLatitudeCMM4 Latitude.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.8 |
gpsLongitudeCMM4 longitude.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.9 |
gpsInvalidMsgNumber of invalid messages.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.10 |
gpsRestartCountNumber of unit restarts.ro INTEGER .1.3.6.1.4.1.161.19.3.6.4.11 |
gpsReceiverInfoA textual string contains information on GPS receiver.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.4.12 |
gpsSyncStatusCurrent Live value of GPS Sync Status.ro Enumeration .1.3.6.1.4.1.161.19.3.6.4.13 |
gpsSyncMasterSlaveCurrent Live value of GPS Sync Master/Slave Setting.ro Enumeration .1.3.6.1.4.1.161.19.3.6.4.14 |
gpsLogGPS log. Includes times of sync detected and sync lost.ro EventString (WHISP-TCV2-MIB) .1.3.6.1.4.1.161.19.3.6.4.15 |
gpsReInitCountGPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device.ro INTEGER .1.3.6.1.4.1.161.19.3.6.4.16 |
cmm4EventLog OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.6.5 |
eventLogCMM4 Event log.ro EventString (WHISP-TCV2-MIB) .1.3.6.1.4.1.161.19.3.6.5.1 |
ntpLogCMM4 NTP Logro EventString (WHISP-TCV2-MIB) .1.3.6.1.4.1.161.19.3.6.5.2 |
cmm4Controls OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.6.6 |
cmm4RebootSetting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state.rw Enumeration .1.3.6.1.4.1.161.19.3.6.6.1 |
cmm4ClearEventLogSetting the variable to 1 will clear the event log.rw Enumeration .1.3.6.1.4.1.161.19.3.6.6.2 |
cmm4RebootIfRequiredSetting this to 1 will reboot the CMM4 IF and ONLY IF it is required due to configuration updates. If a reboot is NOT required, setting this value to 1 will have no affect. If a reboot IS required, setting this value to 1 will reboot the CMM. Writing 0 has no affect.rw Enumeration .1.3.6.1.4.1.161.19.3.6.6.3 |
cmm4Snmp OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.6.7 |
cmm4SnmpComStringSNMP Community Stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.1 |
cmm4SnmpAccessSubnetSNMP Accessing Subnet. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.2 |
cmm4SnmpTrapIp1SNMP Trap IP 1.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.3 |
cmm4SnmpTrapIp2SNMP Trap IP 2.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.4 |
cmm4SnmpTrapIp3SNMP Trap IP 3.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.5 |
cmm4SnmpTrapIp4SNMP Trap IP 4.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.6 |
cmm4SnmpTrapIp5SNMP Trap IP 5.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.7 |
cmm4SnmpTrapIp6SNMP Trap IP 6.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.8 |
cmm4SnmpTrapIp7SNMP Trap IP 7.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.9 |
cmm4SnmpTrapIp8SNMP Trap IP 8.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.10 |
cmm4SnmpTrapIp9SNMP Trap IP 9.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.11 |
cmm4SnmpTrapIp10SNMP Trap IP 10.rw IpAddress .1.3.6.1.4.1.161.19.3.6.7.12 |
cmm4SnmpReadOnlySNMP Permissions 1 - Read Only 0 - Read/Write.rw Enumeration .1.3.6.1.4.1.161.19.3.6.7.13 |
cmm4SnmpGPSSyncTrapEnableVariable to enable/disable GPS sync/out-sync traps.rw Enumeration .1.3.6.1.4.1.161.19.3.6.7.14 |
cmm4SnmpAccessSubnet2SNMP Accessing Subnet 2. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.15 |
cmm4SnmpAccessSubnet3SNMP Accessing Subnet 3. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.16 |
cmm4SnmpAccessSubnet4SNMP Accessing Subnet 4. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.17 |
cmm4SnmpAccessSubnet5SNMP Accessing Subnet 5. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.18 |
cmm4SnmpAccessSubnet6SNMP Accessing Subnet 6. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.19 |
cmm4SnmpAccessSubnet7SNMP Accessing Subnet 7. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.20 |
cmm4SnmpAccessSubnet8SNMP Accessing Subnet 8. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.21 |
cmm4SnmpAccessSubnet9SNMP Accessing Subnet 9. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.22 |
cmm4SnmpAccessSubnet10SNMP Accessing Subnet 10. In x.x.x.x/y form where x.x.x.x is network and y is mask length.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.7.23 |
cmm4Event OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.6.8 |
cmm4GPSEvent OBJECT IDENTIFIER .1.3.6.1.4.1.161.19.3.6.8.1 |
cmm4GPSInSyncSignals a transition from No Sync to Sync OK. NOTIFICATION-TYPE .1.3.6.1.4.1.161.19.3.6.8.1.1 |
cmm4GPSNoSyncSignals a transition from Sync OK to No Sync. NOTIFICATION-TYPE .1.3.6.1.4.1.161.19.3.6.8.1.2 |
cmm4UserTableUser information table. SEQUENCE OF Cmm4UserEntry .1.3.6.1.4.1.161.19.3.6.9 |
cmm4UserEntryUser entry. Cmm4UserEntry .1.3.6.1.4.1.161.19.3.6.9.1 |
entryIndexUser information table index.ro INTEGER .1.3.6.1.4.1.161.19.3.6.9.1.1 |
userLoginNameUser name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.9.1.2 |
userPswdUser password.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.161.19.3.6.9.1.3 |
accessLevelUser access level.ro Enumeration .1.3.6.1.4.1.161.19.3.6.9.1.4 |