SIAE-USER-MIB
The SIAE-USER-MIB module enables SNMP-based management of user authentication credentials and privilege levels for SIAE network equipment access control. It provides granular visibility into active user sessions, role assignments, and access policy enforcement to ensure secure administrative and operational access to SIAE infrastructure.
Imported Objects
Objects
46 total| Object Name |
|---|
accessControlUser privileges and credentials for SIAE equipment access control. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.5 |
accessControlMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.5.1 |
accessControlGroupTableTable with Group records. SEQUENCE OF AccessControlGroupRecord .1.3.6.1.4.1.3373.1103.5.2 |
accessControlGroupRecordGroup record. At most 10 records can be present in accessControlGroupTable. AccessControlGroupRecord .1.3.6.1.4.1.3373.1103.5.2.1 |
accessControlGroupNameASCII string identifying the Group, used as index for the table.rw SnmpAdminString .1.3.6.1.4.1.3373.1103.5.2.1.1 |
accessControlGroupProfileThis object defines the group access privileges. 'Admin' profile can read and write all MIB, 'readwrite' profile can write all MIB leaves but it can not manage users, 'maintenance' profile can do only manual operations, while 'readonly' can only perform get operations.rw Enumeration .1.3.6.1.4.1.3373.1103.5.2.1.2 |
accessControlGroupHttpThis object allows or denies a given group using http protocol for WebLct to access equipment.rw Enumeration .1.3.6.1.4.1.3373.1103.5.2.1.3 |
accessControlGroupHttpsThis object allows or denies a given group using https protocol for WebLct to access equipment.rw Enumeration .1.3.6.1.4.1.3373.1103.5.2.1.4 |
accessControlGroupSnmpThis object allows or denies a given group using snmp protocol to access network equipment. If snmp protocol is enabled, it is possible to choose between V1, V2c and V3 versions of snmp.rw Enumeration .1.3.6.1.4.1.3373.1103.5.2.1.5 |
accessControlGroupFtpThis object allows or denies a given group using ftp protocol.rw Enumeration .1.3.6.1.4.1.3373.1103.5.2.1.6 |
accessControlGroupSftpThis object allows or denies a given group using sftp protocol.rw Enumeration .1.3.6.1.4.1.3373.1103.5.2.1.7 |
accessControlGroupSshThis object allows or denies a given group using ssh protocol.rw Enumeration .1.3.6.1.4.1.3373.1103.5.2.1.8 |
accessControlGroupRowStatusThis object is used to manage a row in accessControlGroupTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.5.2.1.9 |
accessControlGroupCliThis object allows or denies a given group using both cli through serial port and remote cli (telnet). Only 'admin' profile is allowed to use cli and can execute all commands.ro Enumeration .1.3.6.1.4.1.3373.1103.5.2.1.10 |
accessControlUserTableTable with User records. At most 10 records can be present in accessControlUserTable. SEQUENCE OF AccessControlUserRecord .1.3.6.1.4.1.3373.1103.5.3 |
accessControlUserRecordUser record. AccessControlUserRecord .1.3.6.1.4.1.3373.1103.5.3.1 |
accessControlUserNameASCII string identifying the user.rw SnmpAdminString .1.3.6.1.4.1.3373.1103.5.3.1.1 |
accessControlUserGroupNameThis object specifies which group this user belongs to. It must refers to an entry of accessControlGroupTable.rw SnmpAdminString .1.3.6.1.4.1.3373.1103.5.3.1.2 |
accessControlUserPwdThis object specifies the login password of the specified user.rw DisplayString .1.3.6.1.4.1.3373.1103.5.3.1.3 |
accessControlUserSnmpAuthProtThis object is used to set the user authentication protocol if the related group can use snmp protocol.rw Enumeration .1.3.6.1.4.1.3373.1103.5.3.1.4 |
accessControlUserSnmpAuthKeyThis object specifies the user authentication key if the related group can use snmpv3 protocol.rw OCTET STRING .1.3.6.1.4.1.3373.1103.5.3.1.5 |
accessControlUserSnmpPrivProtThis object is used to set the user cipher protocol if the related group can use snmp protocol.rw Enumeration .1.3.6.1.4.1.3373.1103.5.3.1.6 |
accessControlUserSnmpPrivKeyThis object specifies the user cipher key if the related group can use snmpv3 protocol.rw OCTET STRING .1.3.6.1.4.1.3373.1103.5.3.1.7 |
accessControlUserTimeoutThis object defines the user timeout after login operation. Zero timeout means no timeout.rw INTEGER .1.3.6.1.4.1.3373.1103.5.3.1.8 |
accessControlUserRowStatusThis object is used to manage an instance in accessControlUserTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.5.3.1.9 |
accessControlLoginTableTable with Login records. At most 4 users via WebLct, 10 users via snmp and 10 users via cli can be logged at the same time in the equipment. SEQUENCE OF AccessControlLoginRecord .1.3.6.1.4.1.3373.1103.5.4 |
accessControlLoginRecordLogin record. The create operation is performed by setting accessControlLoginPwd object. AccessControlLoginRecord .1.3.6.1.4.1.3373.1103.5.4.1 |
accessControlLoginUserNameThis object defines the name of the logged user.ro SnmpAdminString .1.3.6.1.4.1.3373.1103.5.4.1.1 |
accessControlLoginIpAddressThis object defines the IP address of the logged user.ro IpAddress .1.3.6.1.4.1.3373.1103.5.4.1.2 |
accessControlLoginRequestThis object is used to do logout or to force logout of other users. Only users with 'admin' profile can force logout.rw Enumeration .1.3.6.1.4.1.3373.1103.5.4.1.3 |
accessControlLoginTrapEnableThis object enables/disables trap receiver for a given user.rw Enumeration .1.3.6.1.4.1.3373.1103.5.4.1.4 |
accessControlLoginTypeThis object identifies login type.ro Enumeration .1.3.6.1.4.1.3373.1103.5.4.1.5 |
accessControlLoginPwdThis object is used to create a row in the table. It must correspond to the user password defined in accessControlUserTable.rw OCTET STRING .1.3.6.1.4.1.3373.1103.5.4.1.6 |
accessControlLoginPollingThis object is used to refresh the timeout of the related instance of the table. To keep user logged in, manager must read this object before the end of accessControlUserTimeout. For cli users execution of cli commands refreshes timeout.ro Enumeration .1.3.6.1.4.1.3373.1103.5.4.1.7 |
accessControlClientTableTable with records that show client credentials to access FTP and SFTP services. SEQUENCE OF AccessControlClientRecord .1.3.6.1.4.1.3373.1103.5.5 |
accessControlClientRecordClient credentials record for a given user. AccessControlClientRecord .1.3.6.1.4.1.3373.1103.5.5.1 |
accessControlClientServiceThis object is used to identify the service that a given user can access as client.rw Enumeration .1.3.6.1.4.1.3373.1103.5.5.1.1 |
accessControlClientServiceStatusThis object is used to enable/disable the FTP/SFTP client on the equipment. If both clients are enabled, SFTP client is adopted.rw Enumeration .1.3.6.1.4.1.3373.1103.5.5.1.2 |
accessControlClientNameASCII string identifying the client name.rw SnmpAdminString .1.3.6.1.4.1.3373.1103.5.5.1.3 |
accessControlClientPwdASCII string identifying the client password.rw SnmpAdminString .1.3.6.1.4.1.3373.1103.5.5.1.4 |
accessControlClientStorageTypeThe storage type for this conceptual row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.5.5.1.5 |
accessControlClientRowStatusThe status of this conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.5.5.1.6 |
accessControlExtLoginTableA table that contains additional information about every user that is logged into the equipment. SEQUENCE OF AccessControlExtLoginRecord .1.3.6.1.4.1.3373.1103.5.6 |
accessControlExtLoginRecordAdditional information record for a given logged user. AccessControlExtLoginRecord .1.3.6.1.4.1.3373.1103.5.6.1 |
accessControlExtLoginProfileThis object defines the access privileges associated to logged user. 'Admin' profile can read and write all MIB, 'readwrite' profile can write all MIB leaves but it can not manage users, 'maintenance' can do only manual operations, while 'readonly' can only perform get operations. In case of local authentication, the user profile is found in local database, while, if authentication is remote, the profile is assigned by remote server.ro Enumeration .1.3.6.1.4.1.3373.1103.5.6.1.1 |
accessControlExtLoginAuthModeThis object shows if logged user has been authenticated locally or by remote server (i.e RADIUS, TACACS, etc...).ro Enumeration .1.3.6.1.4.1.3373.1103.5.6.1.2 |
More MIBs from SIAE MICROELETTRONICA spa
Browse all SIAE MICROELETTRONICA spaMIBs →The SIAE-RADIO-SYSTEM-MIB facilitates the monitoring and management of SIAE radio transmission infrastructure, specifically exposing performance metrics such as RF link status, signal strength, error rates, and system health indicators for broadcast and telecommunications equipment.
The SIAE-PTP-MIB module enables monitoring and management of SIAE hardware devices implementing the IEEE 1588-2008 Precision Time Protocol and ITU-T G.8275.1 telecom profile, specifically exposing metrics for clock synchronization states, grandmaster selection, and phase/time offset measurements.
The SIAE-SYNC-MIB module manages timing source configuration and synchronization states for SIAE broadcast infrastructure equipment, monitoring critical metrics such as reference clock status, synchronization lock status, and time deviation values to ensure precise frame and data alignment.
The SIAE-ALARM-MIB module enables the monitoring of network element alarm state transitions and the retrieval of active alarm entries via SNMP for SIAE-managed infrastructure. It specifically tracks alarm severity, timestamp, and status changes to facilitate real-time fault detection and event logging.
The SIAE-SFP-MIB enables SNMP-based monitoring and alarm generation for SIAE Small Form-Factor Pluggable optical transceivers, exposing diagnostic parameters defined by SFF-8472 such as temperature, supply voltage, laser bias current, and optical transmit/receive power levels.
The SIAE-PMRXPWR-MIB module enables SNMP-based monitoring of received RF power levels within SIAE microwave radio systems, specifically tracking performance metrics such as instantaneous and average RX signal strength to assess link quality and detect signal degradation.