SIAE-SENSOR-TEMP-MIB
The SIAE-SENSOR-TEMP-MIB enables SNMP-based monitoring of thermal sensor data on SIAE equipment, specifically tracking real-time temperature metrics to facilitate hardware overheating detection and thermal management.
Imported Objects
Objects
25 total| Object Name |
|---|
sensorTempManagement information for equipment heat. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.77 |
sensorTempMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.77.1 |
sensorTempTableTable with sensorTemp device entries SEQUENCE OF SensorTempEntry .1.3.6.1.4.1.3373.1103.77.2 |
sensorTempEntryTemperature Sensor entry SensorTempEntry .1.3.6.1.4.1.3373.1103.77.2.1 |
sensorTempIndexTemperature Sensor index.ro Integer32 .1.3.6.1.4.1.3373.1103.77.2.1.1 |
sensorTempValueValue of the temperature (in Celsius).ro Integer32 .1.3.6.1.4.1.3373.1103.77.2.1.2 |
sensorTempThreshold1This object can not be modified. It reports the temperature threshold 1. When sensorTempValue exceeds this value sensorTempStatus1 becomes Active. When threshold has been exceed status returns stand-by only when sensorTempValue goes under sensorTempHysteresis1.ro Integer32 .1.3.6.1.4.1.3373.1103.77.2.1.3 |
sensorTempThreshold2This object can not be modified. It reports the temperature threshold 2. When sensorTempValue exceeds this value sensorTempStatus2 becomes Active. When threshold has been exceed status returns stand-by only when sensorTempValue goes under sensorTempHysteresis2.ro Integer32 .1.3.6.1.4.1.3373.1103.77.2.1.4 |
sensorTempHysteresis1This object can not be modified. It reports the temperature hysteresis 1. When sensorTempStatus1 is Active it represents the value under which returns cleared.ro Integer32 .1.3.6.1.4.1.3373.1103.77.2.1.5 |
sensorTempHysteresis2This object can not be modified. It reports the temperature hysteresis 2. When sensorTempStatus1 is Active it represents the value under which returns cleared.ro Integer32 .1.3.6.1.4.1.3373.1103.77.2.1.6 |
sensorTempStatus1This object is used to manage temperature related to sensorTempThreshold1. Values mean: cleared: sensorTempValue is lower than threshold1 active: sensorTempValue is greater than threshold1 hysteresis: sensorTempValue is between threshold1 and hysteresis1 but previuosly greater than thresold1.ro Enumeration .1.3.6.1.4.1.3373.1103.77.2.1.7 |
sensorTempStatus2This object is used to manage temperature related to sensorTempThreshold2. Values mean: cleared: sensorTempValue is lower than threshold2 active: sensorTempValue is greater than threshold2 hysteresis: sensorTempValue is between threshold2 and hysteresis2 but previuosly greater than thresold2.ro Enumeration .1.3.6.1.4.1.3373.1103.77.2.1.8 |
sensorTempLabelA textual string containing information on sensorTemp sensor.ro DisplayString .1.3.6.1.4.1.3373.1103.77.2.1.9 |
sensorTempAlarmThreshold1This object is used to notiy alarm if at least one entry in the sensorTemp table has got sensorTempStatus1 alarmed.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.77.3 |
sensorTempAlarmThreshold2This object is used to notiy alarm if at least one entry in the sensorTemp table has got sensorTempStatus2 alarmed.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.77.4 |
sensorTempAlarmThreshold1SeverityThis object is used to change severity of sensorTempAlarmThreshold1.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.77.5 |
sensorTempAlarmThreshold2SeverityThis object is used to change severity of sensorTempAlarmThreshold2.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.77.6 |
sensorTempMonitorTableTable with sensorTempMonitor entries SEQUENCE OF SensorTempMonitorEntry .1.3.6.1.4.1.3373.1103.77.7 |
sensorTempMonitorEntryTemperature Sensor Monitor entry SensorTempMonitorEntry .1.3.6.1.4.1.3373.1103.77.7.1 |
sensorTempMonitorAdminStatusThe desired state of the temperatuure monitor. When a managed system initializes, all the temperature monitors start with sensorTempMonitorAdminStatus in the down(2) state, it's a default state also. As a result of either explicit management action or per configuration information retained by the managed system, sensorTempMonitorAdminStatus is then changed to the up(1) state (or remains in the down(2) state).rw Enumeration .1.3.6.1.4.1.3373.1103.77.7.1.1 |
sensorTempMonitorOperStatusThe current state of the temperatuure monitor. Usually this object report the same value of sensorTempMonitorAdminStatus. When there is some problem related to the temperature sensor, this object shown the down(2) value even if sensorTempMonitorAdminStatus is set to up(1).ro Enumeration .1.3.6.1.4.1.3373.1103.77.7.1.2 |
sensorTempMonitorMinTempThe minimum value of the temperature measured in the last actual 900 seconds. The value is expressed in degrees Celsius.ro Integer32 .1.3.6.1.4.1.3373.1103.77.7.1.3 |
sensorTempMonitorMaxTempThe maximum value of the temperature measured in the last actual 900 seconds. The value is expressed in degrees Celsius.ro Integer32 .1.3.6.1.4.1.3373.1103.77.7.1.4 |
sensorTempMonitorAverageTempThe average value of the temperature measured in the last actual 900 seconds. The value is expressed in tenth of degrees Celsius.ro Integer32 .1.3.6.1.4.1.3373.1103.77.7.1.5 |
sensorTempMonitorSystemControlThe administrative system control status requested by management for the TEMP-MONITOR feature. The value 'start'(1) indicates that TEMP-MONITOR should be supported in the device on all temperature sensors that have this capability (Those shown in sensorTempMonitorTable). The value shutdown(2) indicates that TEMP-MONITOR should be shutdown in the device on all temperature sensors.rw Enumeration .1.3.6.1.4.1.3373.1103.77.8 |
More MIBs from SIAE MICROELETTRONICA spa
Browse all SIAE MICROELETTRONICA spaMIBs →The SIAE-RADIO-SYSTEM-MIB facilitates the monitoring and management of SIAE radio transmission infrastructure, specifically exposing performance metrics such as RF link status, signal strength, error rates, and system health indicators for broadcast and telecommunications equipment.
The SIAE-PTP-MIB module enables monitoring and management of SIAE hardware devices implementing the IEEE 1588-2008 Precision Time Protocol and ITU-T G.8275.1 telecom profile, specifically exposing metrics for clock synchronization states, grandmaster selection, and phase/time offset measurements.
The SIAE-SYNC-MIB module manages timing source configuration and synchronization states for SIAE broadcast infrastructure equipment, monitoring critical metrics such as reference clock status, synchronization lock status, and time deviation values to ensure precise frame and data alignment.
The SIAE-ALARM-MIB module enables the monitoring of network element alarm state transitions and the retrieval of active alarm entries via SNMP for SIAE-managed infrastructure. It specifically tracks alarm severity, timestamp, and status changes to facilitate real-time fault detection and event logging.
The SIAE-SFP-MIB enables SNMP-based monitoring and alarm generation for SIAE Small Form-Factor Pluggable optical transceivers, exposing diagnostic parameters defined by SFF-8472 such as temperature, supply voltage, laser bias current, and optical transmit/receive power levels.
The SIAE-PMRXPWR-MIB module enables SNMP-based monitoring of received RF power levels within SIAE microwave radio systems, specifically tracking performance metrics such as instantaneous and average RX signal strength to assess link quality and detect signal degradation.