SIAE-SAFE-MODE-MIB
The SIAE-SAFE-MODE-MIB provides management objects for monitoring and controlling the safe mode operational state of SIAE (Società Italiana per l'Automazione Elettrica) network equipment, specifically tracking the activation status and transition events of the device's emergency or maintenance operational mode.
Imported Objects
Objects
9 total| Object Name |
|---|
safeModeManagement information for safe mode. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.99 |
safeModeMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.99.1 |
safeModeAlarmSafe mode alarm with associated severity. This object indicates that the equipment is in safe mode.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.99.2 |
safeModeAlarmSeverityCodeDefines the severity associated to the safeModeAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.99.3 |
safeModeStatusThe safe mode status of the equipment. Equipment in normal-mode has safe mode status inactivero Enumeration .1.3.6.1.4.1.3373.1103.99.4 |
safeModeRescueAdminStatusThis object enables or disables the site-rescue .rw Enumeration .1.3.6.1.4.1.3373.1103.99.5 |
safeModeRescuePwdThis object specifies the login password of the rescue user.rw DisplayString .1.3.6.1.4.1.3373.1103.99.6 |
safeModeRescueIpAddressIp address of the equipment in status site-rescuerw IpAddress .1.3.6.1.4.1.3373.1103.99.7 |
safeModeRescueIpNetMaskThe subnet Mask associated with the Rescue IP address. The value of the Mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.3373.1103.99.8 |
More MIBs from SIAE MICROELETTRONICA spa
Browse all SIAE MICROELETTRONICA spaMIBs →The SIAE-RADIO-SYSTEM-MIB facilitates the monitoring and management of SIAE radio transmission infrastructure, specifically exposing performance metrics such as RF link status, signal strength, error rates, and system health indicators for broadcast and telecommunications equipment.
The SIAE-PTP-MIB module enables monitoring and management of SIAE hardware devices implementing the IEEE 1588-2008 Precision Time Protocol and ITU-T G.8275.1 telecom profile, specifically exposing metrics for clock synchronization states, grandmaster selection, and phase/time offset measurements.
The SIAE-SYNC-MIB module manages timing source configuration and synchronization states for SIAE broadcast infrastructure equipment, monitoring critical metrics such as reference clock status, synchronization lock status, and time deviation values to ensure precise frame and data alignment.
The SIAE-ALARM-MIB module enables the monitoring of network element alarm state transitions and the retrieval of active alarm entries via SNMP for SIAE-managed infrastructure. It specifically tracks alarm severity, timestamp, and status changes to facilitate real-time fault detection and event logging.
The SIAE-SFP-MIB enables SNMP-based monitoring and alarm generation for SIAE Small Form-Factor Pluggable optical transceivers, exposing diagnostic parameters defined by SFF-8472 such as temperature, supply voltage, laser bias current, and optical transmit/receive power levels.
The SIAE-PMRXPWR-MIB module enables SNMP-based monitoring of received RF power levels within SIAE microwave radio systems, specifically tracking performance metrics such as instantaneous and average RX signal strength to assess link quality and detect signal degradation.