SIAE-RET-MIB
The SIAE-RET-MIB module provides SNMP access to the Remote Element Table on SIAE (Società Italiana per l'Esercizio delle Telecomunicazioni) transmission equipment, enabling the monitoring of remote node status, interface states, and signal integrity metrics within optical transport networks.
Imported Objects
Objects
10 total| Object Name |
|---|
remElementRemote Element Table MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.70 |
remoteElementMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.70.1 |
remoteElementTableTable with ISO/OSI remote element that are reacheable from this NE. SEQUENCE OF RemoteElementEntry .1.3.6.1.4.1.3373.1103.70.2 |
remoteElementEntryRemote element record. RemoteElementEntry .1.3.6.1.4.1.3373.1103.70.2.1 |
remoteElementIpAddressIP address of remote element.ro IpAddress .1.3.6.1.4.1.3373.1103.70.2.1.1 |
remoteElementGosipAddressGosip address of remote element.rw OCTET STRING .1.3.6.1.4.1.3373.1103.70.2.1.2 |
remoteElementLabelASII string used for label the remote element.rw DisplayString .1.3.6.1.4.1.3373.1103.70.2.1.3 |
remoteElementTypeType of Remote Network Element: * elemManager: element Manager. * external: the NE is used as a gateway to connect the element. * remote: the equipment connected to the other end of radio link. * snm: equipment managed by SubNetwork Manager.rw Enumeration .1.3.6.1.4.1.3373.1103.70.2.1.4 |
remoteElementRadioBranchIdIt reports the radio branch connecting the IP adress. (Zero means IP address not directly connected).ro INTEGER .1.3.6.1.4.1.3373.1103.70.2.1.5 |
remoteElementRowStatusStatus of this row of remoteElementTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.70.2.1.6 |
More MIBs from SIAE MICROELETTRONICA spa
Browse all SIAE MICROELETTRONICA spaMIBs →The SIAE-RADIO-SYSTEM-MIB facilitates the monitoring and management of SIAE radio transmission infrastructure, specifically exposing performance metrics such as RF link status, signal strength, error rates, and system health indicators for broadcast and telecommunications equipment.
The SIAE-PTP-MIB module enables monitoring and management of SIAE hardware devices implementing the IEEE 1588-2008 Precision Time Protocol and ITU-T G.8275.1 telecom profile, specifically exposing metrics for clock synchronization states, grandmaster selection, and phase/time offset measurements.
The SIAE-SYNC-MIB module manages timing source configuration and synchronization states for SIAE broadcast infrastructure equipment, monitoring critical metrics such as reference clock status, synchronization lock status, and time deviation values to ensure precise frame and data alignment.
The SIAE-ALARM-MIB module enables the monitoring of network element alarm state transitions and the retrieval of active alarm entries via SNMP for SIAE-managed infrastructure. It specifically tracks alarm severity, timestamp, and status changes to facilitate real-time fault detection and event logging.
The SIAE-SFP-MIB enables SNMP-based monitoring and alarm generation for SIAE Small Form-Factor Pluggable optical transceivers, exposing diagnostic parameters defined by SFF-8472 such as temperature, supply voltage, laser bias current, and optical transmit/receive power levels.
The SIAE-PMRXPWR-MIB module enables SNMP-based monitoring of received RF power levels within SIAE microwave radio systems, specifically tracking performance metrics such as instantaneous and average RX signal strength to assess link quality and detect signal degradation.