SIAE-QUEUE-DEPTH-MIB
The SIAE-QUEUE-DEPTH-MIB enables monitoring of buffer utilization and packet queue depths on SIAE networking equipment to assess congestion levels and manage traffic flow. This module provides specific counters and gauges for queue states, allowing administrators to detect potential bottlenecks and optimize data transmission performance on SIAE hardware.
Imported Objects
Objects
11 total| Object Name |
|---|
queueDepthQueue depth management for SIAE equipments. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.84 |
queueDepthMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.84.1 |
qdProfileTableA list of queue depth profile entries. This table is useful to show to the manager available profiles and its feature. SEQUENCE OF QueueDepthProfileEntry .1.3.6.1.4.1.3373.1103.84.2 |
qdProfileEntryAn entry containing information about each queue depth settings realized by a profile. QueueDepthProfileEntry .1.3.6.1.4.1.3373.1103.84.2.1 |
qdProfileIndexA unique value, greater than zero, for each queue depth profile. It is recommended that values are assigned contiguously starting from 1.ro Integer32 .1.3.6.1.4.1.3373.1103.84.2.1.1 |
qdProfileNameA brief description of the settings realized by this profile.ro DisplayString .1.3.6.1.4.1.3373.1103.84.2.1.2 |
qdProfileDescriptionA detailed description of the settings realized by this profile.ro DisplayString1024 .1.3.6.1.4.1.3373.1103.84.2.1.3 |
qdProfileSelectThis object selects a queue depth profile from qdProfileTable to be applied after a cold restart.rw Integer32 .1.3.6.1.4.1.3373.1103.84.3 |
qdActualProfileThis object shows the actual queue profile in use. The object content is set upon restart equal to qdProfileSelect and is never changed, since a new profile will be applied after a next cold restart. The value 0 means the actual profile is unknown.ro Integer32 .1.3.6.1.4.1.3373.1103.84.4 |
qdProfileMismatchAlarmThis alarm is raise when the actual profile is not equal to the selected profile.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.84.5 |
qdProfileMismatchAlarmSeverityCodeDefines the severity associated to the qdProfileMismatchAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.84.6 |
More MIBs from SIAE MICROELETTRONICA spa
Browse all SIAE MICROELETTRONICA spaMIBs →The SIAE-RADIO-SYSTEM-MIB facilitates the monitoring and management of SIAE radio transmission infrastructure, specifically exposing performance metrics such as RF link status, signal strength, error rates, and system health indicators for broadcast and telecommunications equipment.
The SIAE-PTP-MIB module enables monitoring and management of SIAE hardware devices implementing the IEEE 1588-2008 Precision Time Protocol and ITU-T G.8275.1 telecom profile, specifically exposing metrics for clock synchronization states, grandmaster selection, and phase/time offset measurements.
The SIAE-SYNC-MIB module manages timing source configuration and synchronization states for SIAE broadcast infrastructure equipment, monitoring critical metrics such as reference clock status, synchronization lock status, and time deviation values to ensure precise frame and data alignment.
The SIAE-ALARM-MIB module enables the monitoring of network element alarm state transitions and the retrieval of active alarm entries via SNMP for SIAE-managed infrastructure. It specifically tracks alarm severity, timestamp, and status changes to facilitate real-time fault detection and event logging.
The SIAE-SFP-MIB enables SNMP-based monitoring and alarm generation for SIAE Small Form-Factor Pluggable optical transceivers, exposing diagnostic parameters defined by SFF-8472 such as temperature, supply voltage, laser bias current, and optical transmit/receive power levels.
The SIAE-PMRXPWR-MIB module enables SNMP-based monitoring of received RF power levels within SIAE microwave radio systems, specifically tracking performance metrics such as instantaneous and average RX signal strength to assess link quality and detect signal degradation.