SIAE-POWER-SUPPLY-MIB
The SIAE-POWER-SUPPLY-MIB enables SNMP-based monitoring and management of power supply unit status, voltage levels, current draw, and temperature metrics on SIAE Microelectronics communication hardware. This module facilitates real-time fault detection and capacity planning by exposing specific power subsystem performance counters and alarm states for network infrastructure devices.
Imported Objects
Objects
10 total| Object Name |
|---|
pwrSupplySIAE's Power Supply MIB. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.89 |
pwrSupplyMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.89.1 |
pwrSupplyTableTable with SIAE's Power Supply Entries. SEQUENCE OF PwrSupplyEntry .1.3.6.1.4.1.3373.1103.89.2 |
pwrSupplyTableEntrySIAE's Power Supply entris. There is an entry for each power supply unit in the device. PwrSupplyEntry .1.3.6.1.4.1.3373.1103.89.2.1 |
pwrSupplyIndexA unique value, greater than zero, for each power supply unit. Integer32 .1.3.6.1.4.1.3373.1103.89.2.1.1 |
pwrSupplyRowStatusStatus of this row of pwrSupplyTable. A manager should not set this object. It is used by the agent to create relevant rows, depending on the HW configuration.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.89.2.1.2 |
pwrSupplyLabelA textual string containing information about the power supply unit.ro DisplayString .1.3.6.1.4.1.3373.1103.89.2.1.3 |
pwrSupplyAdminStatusThe desired state of the Power supply. Only devices that allow the shutdown of a power supply accept the value disable(1). This object can be set only when the pwrSupplyRowStatus is active. Default value alfoplus2, alfo80hdx: disable Default value other equipment: enablerw Enumeration .1.3.6.1.4.1.3373.1103.89.2.1.4 |
pwrSupplyAlarmThe power supply has failed.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.89.2.1.5 |
pwrSupplyAlarmSeverityCodeDefines the severity associated to the pwrSupplyAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.89.3 |
More MIBs from SIAE MICROELETTRONICA spa
Browse all SIAE MICROELETTRONICA spaMIBs →The SIAE-RADIO-SYSTEM-MIB facilitates the monitoring and management of SIAE radio transmission infrastructure, specifically exposing performance metrics such as RF link status, signal strength, error rates, and system health indicators for broadcast and telecommunications equipment.
The SIAE-PTP-MIB module enables monitoring and management of SIAE hardware devices implementing the IEEE 1588-2008 Precision Time Protocol and ITU-T G.8275.1 telecom profile, specifically exposing metrics for clock synchronization states, grandmaster selection, and phase/time offset measurements.
The SIAE-SYNC-MIB module manages timing source configuration and synchronization states for SIAE broadcast infrastructure equipment, monitoring critical metrics such as reference clock status, synchronization lock status, and time deviation values to ensure precise frame and data alignment.
The SIAE-ALARM-MIB module enables the monitoring of network element alarm state transitions and the retrieval of active alarm entries via SNMP for SIAE-managed infrastructure. It specifically tracks alarm severity, timestamp, and status changes to facilitate real-time fault detection and event logging.
The SIAE-SFP-MIB enables SNMP-based monitoring and alarm generation for SIAE Small Form-Factor Pluggable optical transceivers, exposing diagnostic parameters defined by SFF-8472 such as temperature, supply voltage, laser bias current, and optical transmit/receive power levels.
The SIAE-PMRXPWR-MIB module enables SNMP-based monitoring of received RF power levels within SIAE microwave radio systems, specifically tracking performance metrics such as instantaneous and average RX signal strength to assess link quality and detect signal degradation.