SIAE-LLF-MIB
AI MIB Summary
The SIAE-LLF-MIB module enables monitoring of link loss forwarding states and associated counter metrics on SIAE network devices to detect and track packet forwarding failures caused by interface or link degradation.
SIAE's Link Loss Forwarding MIB.
Main OID:
llf.1.3.6.1.4.1.3373.1103.85
28
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
llfSIAE's Link Loss Forwarding MIB. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.85 |
llfMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.85.1 |
llfTableTable with SIAE's LLF entries. SEQUENCE OF LlfInterface .1.3.6.1.4.1.3373.1103.85.2 |
llfEntrySIAE's LLF entry. LlfInterface .1.3.6.1.4.1.3373.1103.85.2.1 |
llfIndexA unique value, greater than zero, for each interface supporting LLF. This object is identical to the ifIndex of the standard MIB-2 ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3373.1103.85.2.1.1 |
llfEnableOn interfaces supporting LLF, this object is used to disable or enable LLF towards local LAN interfaces.rw Enumeration .1.3.6.1.4.1.3373.1103.85.2.1.2 |
llfUnidirectionalFaultWhen enable is set, a local link fault causes LLF on both local and remote interfaces.rw Enumeration .1.3.6.1.4.1.3373.1103.85.2.1.3 |
llfDelayTimeThe LLF delay time specifies the time interval (in seconds) to wait for to actuate or to remove the Link Loss Forwarding condition.rw INTEGER .1.3.6.1.4.1.3373.1103.85.2.1.4 |
llfProtectionModeWhen protection mode is enabled, LLF alarm is issued only when all radio links or circuits connected to interface are alarmed.rw Enumeration .1.3.6.1.4.1.3373.1103.85.2.1.5 |
llfAlarmInterface Link Loss Forwarding alarm status.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.85.2.1.6 |
llfRowStatusStatus of this row of llfTable. This object may not be set to destroy until at least a circuit belong to this LLF interface. In other words, circuits must be deleted before a LLF interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.85.2.1.7 |
llfMapTableThis table map llf interface on llf circuits. SEQUENCE OF LlfMap .1.3.6.1.4.1.3373.1103.85.3 |
llfMapEntrySIAE's llf cross-connection entry. LlfMap .1.3.6.1.4.1.3373.1103.85.3.1 |
llfMapLinkIndexRadio link identifier. With llfMapPolIndex and llfMapCircuitIndex it points to a specific instance of llfCircuitTable.ro INTEGER .1.3.6.1.4.1.3373.1103.85.3.1.1 |
llfMapPolIndexRadio polarization identifier. With llfMapLinkIndex and llfMapCircuitIndex it points to a specific instance of llfCircuitTable.ro INTEGER .1.3.6.1.4.1.3373.1103.85.3.1.2 |
llfMapCircuitIndexLLF circuit identifier. With llfMapLinkIndex and llfMapPolIndex it points to a specific instance of llfCircuitTable.ro INTEGER .1.3.6.1.4.1.3373.1103.85.3.1.3 |
llfMapLosInsertionEnable or disable insertion of interface LOS into a specified circuit. The inserted LOS is transported through the radio link.rw Enumeration .1.3.6.1.4.1.3373.1103.85.3.1.4 |
llfMapInsertionModeIn single mode, LOS is inserted in the circuit if the relative interface has a LOS alarm. In group mode, LOS is inserted when all (grouped) interfaces mapped to the same circuit have a LOS alarm.rw Enumeration .1.3.6.1.4.1.3373.1103.85.3.1.5 |
llfMapSignalFailAlarm condition detected on specified circuit.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.85.3.1.6 |
llfMapRowStatusStatus of this row of llfMapTablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.85.3.1.7 |
llfCircuitTableTable describing llf circuits available over each link. This circuits can be connected to available interfaces via llfMapTable. SEQUENCE OF LlfCircuit .1.3.6.1.4.1.3373.1103.85.4 |
llfCircuitEntrySIAE's llf circuit entry. LlfCircuit .1.3.6.1.4.1.3373.1103.85.4.1 |
llfCircuitLinkIndexRadio link identifier.ro INTEGER .1.3.6.1.4.1.3373.1103.85.4.1.1 |
llfCircuitPolIndexRadio polarization identifier.ro INTEGER .1.3.6.1.4.1.3373.1103.85.4.1.2 |
llfCircuitIndexLLF circuit identifier.ro INTEGER .1.3.6.1.4.1.3373.1103.85.4.1.3 |
llfCircuitLinkLabelASCII string used to assign a name to the radio link and polarization.ro DisplayString .1.3.6.1.4.1.3373.1103.85.4.1.4 |
llfCircuitRowStatusStatus of this row of llfCircuitTablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.85.4.1.5 |
llfAlarmSeverityCodeDefines the severity associated to the llfAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.85.5 |