SIAE-IFEXT-MIB
The SIAE-IFEXT-MIB extends standard SNMP interface monitoring for SIAE networking hardware by exposing vendor-specific operational metrics, including extended interface statistics, error counters, and physical layer parameters not covered by the standard IF-MIB. This module enables granular visibility into SIAE device interface states and performance anomalies for precise fault isolation and capacity planning.
Imported Objects
Objects
19 total| Object Name |
|---|
ifextSIAE's Interface Extension MIB. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.73 |
ifextMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.73.1 |
ifextTableTable with SIAE's Interface extension records. SEQUENCE OF InterfaceExtensionEntry .1.3.6.1.4.1.3373.1103.73.2 |
ifextTableEntrySIAE's Interface extension record. InterfaceExtensionEntry .1.3.6.1.4.1.3373.1103.73.2.1 |
ifextIfIndexA unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.3373.1103.73.2.1.1 |
ifextLabelA textual string containing information about the interface.ro DisplayString .1.3.6.1.4.1.3373.1103.73.2.1.2 |
ifextAdminStatusThe desired state of the interface. This object can be set only when the ifMainRowStatus of the interface is active. This object has the semantics of the ifAdminStatus of the standard ifTable. The testing(3) state indicates that no operational packets can be passed - this state is not currently supported. When a managed system initializes, all interfaces start with ifMainAdminStatus in the down(2) state, it's a default state also. As a result of either explicit management action or per configuration information retained by the managed system, ifMainAdminStatus is then changed to the up (1) state (or remains in the down(2) state). This object reflects the value of ifMainAdminStatusro Enumeration .1.3.6.1.4.1.3373.1103.73.2.1.3 |
ifextPortUsagePort usage in the system. lan(1) and radio(2) are traffic ports, mgmt(3) are ports dedicated to management traffic, stack(4) ports are port to interconnect switch to stack, aux(5) ports are ports dedicated to other purpose, pwe3(6) ports are dedicated to pseudowire.ro Enumeration .1.3.6.1.4.1.3373.1103.73.2.1.4 |
ifextMediumTypePhysical medium of this interface. Medium type 'combo' can be set as copper or as fiber by ifextMediumSelection.ro Enumeration .1.3.6.1.4.1.3373.1103.73.2.1.5 |
ifextMediumSelectionSelection of physical medium of this interface. Only 'combo' interfaces can be set as copper or as fiber.ro Enumeration .1.3.6.1.4.1.3373.1103.73.2.1.6 |
ifextAlarmReportEnableOn interfaces with ifextPortUsage set to mgmg, this object enables or disables collection and report of the alarms.rw Enumeration .1.3.6.1.4.1.3373.1103.73.2.1.7 |
ifextSfpIdThis object specifies a row in sfpTable. This object is 0 if there isn't any SFP connectied to this interface.ro Integer32 .1.3.6.1.4.1.3373.1103.73.2.1.8 |
ifextCapabilitiesThis indicates which capability is supported from this interface.ro Bits .1.3.6.1.4.1.3373.1103.73.2.1.9 |
ifextLosAlarmInterface Loss of Signal alarmro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.73.2.1.10 |
ifextRowStatusStatus of this row of ifextTablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.73.2.1.11 |
ifextMaintTableTable with object used to maintain Interfaces described in ifextTable SEQUENCE OF InterfaceExtensionMaintEntry .1.3.6.1.4.1.3373.1103.73.3 |
ifextMaintTableEntrySIAE's Interface extension maintenance record. InterfaceExtensionMaintEntry .1.3.6.1.4.1.3373.1103.73.3.1 |
ifextLineLoopThis object is set from admin status of an interface to enable/disable line loop.ro Enumeration .1.3.6.1.4.1.3373.1103.73.3.1.1 |
ifextLosAlarmSeverityCodeDefines the severity associated to the ifextLosAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.73.5 |
More MIBs from SIAE MICROELETTRONICA spa
Browse all SIAE MICROELETTRONICA spaMIBs →The SIAE-RADIO-SYSTEM-MIB facilitates the monitoring and management of SIAE radio transmission infrastructure, specifically exposing performance metrics such as RF link status, signal strength, error rates, and system health indicators for broadcast and telecommunications equipment.
The SIAE-PTP-MIB module enables monitoring and management of SIAE hardware devices implementing the IEEE 1588-2008 Precision Time Protocol and ITU-T G.8275.1 telecom profile, specifically exposing metrics for clock synchronization states, grandmaster selection, and phase/time offset measurements.
The SIAE-SYNC-MIB module manages timing source configuration and synchronization states for SIAE broadcast infrastructure equipment, monitoring critical metrics such as reference clock status, synchronization lock status, and time deviation values to ensure precise frame and data alignment.
The SIAE-ALARM-MIB module enables the monitoring of network element alarm state transitions and the retrieval of active alarm entries via SNMP for SIAE-managed infrastructure. It specifically tracks alarm severity, timestamp, and status changes to facilitate real-time fault detection and event logging.
The SIAE-SFP-MIB enables SNMP-based monitoring and alarm generation for SIAE Small Form-Factor Pluggable optical transceivers, exposing diagnostic parameters defined by SFF-8472 such as temperature, supply voltage, laser bias current, and optical transmit/receive power levels.
The SIAE-PMRXPWR-MIB module enables SNMP-based monitoring of received RF power levels within SIAE microwave radio systems, specifically tracking performance metrics such as instantaneous and average RX signal strength to assess link quality and detect signal degradation.