REDLINE-SYSTEM-MIB
This MIB module contains Redline extensions to the SNMPv2 MIB System Group.
Main OID:
redlineSystemMib.1.3.6.1.4.1.10728.2.1.1
97
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
97 total| Object Name |
|---|
redlineSystemMibThis MIB module contains Redline extensions to the SNMPv2 MIB System Group. MODULE-IDENTITY .1.3.6.1.4.1.10728.2.1.1 |
redlineSystemSystemObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.1 |
redlineSystemSerialNumberThe serial number of the unit.ro DisplayString .1.3.6.1.4.1.10728.2.1.1.1.1 |
redlineSystemSysControl OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.1.2 |
redlineSystemSystemRebootSetting this variable to 2 causes a reboot of the system.rw Enumeration .1.3.6.1.4.1.10728.2.1.1.1.2.1 |
redlineSystemSysDhcpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.1.3 |
redlineSystemDHCPServerIpAddressTypeThe INET address type of Ip address of DHCP server. IPv4 type supported only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.3.1 |
redlineSystemDHCPServerIpAddressThe INET address of DHCP server. Note: This object can not be set if usage of DHCP server is disabled. An attempt to set the address will fail and return 'resourceUnavailable' errorrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.3.2 |
redlineSystemSysIpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.1.4 |
redlineSystemIpAddressTypeThe INET address type of Ip address of the system. IPv4 type supported only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.4.1 |
redlineSystemIpAddressThe INET address of the system. Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the address will fail and return 'resourceUnavailable' errorrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.4.2 |
redlineSystemSubnetMaskAddressTypeThe INET address type of subnet mask of the system. IPv4 type supported only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.4.3 |
redlineSystemSubnetMaskThe Subnet Mask of the system. Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the address will fail and return 'resourceUnavailable' errorrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.4.4 |
redlineSystemDefGatewayAddressTypeThe INET address type of the default gateway. IPv4 type supported only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.4.5 |
redlineSystemDefGatewayAddressThe INET address of the default gateway. Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the address will fail and return 'resourceUnavailable' errorrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.4.6 |
redlineSystemSysSyslogObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.1.5 |
redlineSystemSyslogServerIpAddressTypeThe INET address type of Ip address of Syslog server. IPv4 type supported only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.5.1 |
redlineSystemSyslogServerIpAddressThe INET address of Syslog server. Note: Entering '0.0.0.0' as an address will indicate to the system that Syslog capability is not to be used.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.1.5.2 |
redlineSystemSoftwareObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.2 |
redlineSystemSwActiveVersionThe s/w version of the active (running) image.ro DisplayString .1.3.6.1.4.1.10728.2.1.1.2.1 |
redlineSystemSwAlternateVersionThe s/w version of the alternate (non-active) image.ro DisplayString .1.3.6.1.4.1.10728.2.1.1.2.2 |
redlineSystemSwActivateAlternateSetting this to 2 triggers the switch-over to the alternate s/w image and reboot of the system. Before the switch-over a validation of the alternate image is performed and if it fails the 'inconsistentValue' error status is returned.rw Enumeration .1.3.6.1.4.1.10728.2.1.1.2.3 |
redlineSystemSwSyncAlternateTableThis table contains at most one entry representing a software synchronization process that is either currently in progress or one that was completed. When requested synchronization,the active s/w i image and the active configuration are copied to the alternate s/w image and configuration, respectively. A management station can create this entry if and only if either the table is empty or the only entry is for a synchronization that has already been completed. An attempt to create or write this entry when a synchronization is already in progress results in the 'resourceUnavailable' error status. The redlineSystemSwSyncAlternateStatus state object is used to control and monitor a s/w synchronization process. Setting it to the 'synchronizeAlternate' value starts a new synchronization if none is active at the time (otherwise an error status is returned). SEQUENCE OF RedlineSystemSwSyncAlternateEntry .1.3.6.1.4.1.10728.2.1.1.2.4 |
redlineSystemSwSyncAlternateEntryThis entry contains information about a current or last software synchronization. RedlineSystemSwSyncAlternateEntry .1.3.6.1.4.1.10728.2.1.1.2.4.1 |
redlineSystemSwSyncAlternateIndexThe index of the software isynchronization table. The only value allowed is 1. INTEGER (1) .1.3.6.1.4.1.10728.2.1.1.2.4.1.1 |
redlineSystemSwSyncAlternateSetting it to 2 will synchronize the alternate s/w image and configuration database, i.e. the active s/w image and the active configuration are copied to the alternate s/w image and configuration, respectively.rw Enumeration .1.3.6.1.4.1.10728.2.1.1.2.4.1.2 |
redlineSystemSwSyncAlternateStatusThe status of the current or last software synchronization.ro Enumeration .1.3.6.1.4.1.10728.2.1.1.2.4.1.3 |
redlineSystemSwSyncAlternateTimeEndedThe date and time this software synchronization finished.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.10728.2.1.1.2.4.1.4 |
redlineSystemSwDownloadTableThis table contains at most one entry representing a software download process that is either currently in progress or one that was completed. A management station can create this entry if and only if either the table is empty or the only entry is for a download that has already been completed. An attempt to create or write this entry when a download is already in progress results in the 'resourceUnavailable' error status. The redlineSystemSwDownloadStatus state object is used to control and monitor a s/w download process. Setting it to the 'download' value starts a new download if none is active at the time (otherwise an error status is returned). SEQUENCE OF RedlineSystemSwDownloadEntry .1.3.6.1.4.1.10728.2.1.1.2.5 |
redlineSystemSwDownloadEntryThis entry contains information about a current or last software download. RedlineSystemSwDownloadEntry .1.3.6.1.4.1.10728.2.1.1.2.5.1 |
redlineSystemSwDownloadIndexThe index of the software download table. The only value allowed is 1. INTEGER (1) .1.3.6.1.4.1.10728.2.1.1.2.5.1.1 |
redlineSystemSwDownloadFtpAddressTypeThe INET address type of the software upgrade FTP server. IPv4 type supported only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.2.5.1.2 |
redlineSystemSwDownloadFtpAddressThe INET address of the FTP server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.2.5.1.3 |
redlineSystemSwDownloadFtpUserThe FTP user name.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.2.5.1.4 |
redlineSystemSwDownloadFtpPasswordThe FTP user password. After this object is created it is not accessible.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.2.5.1.5 |
redlineSystemSwDownloadFtpFileThe full software image file path name as required by the FTP server.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.2.5.1.6 |
redlineSystemSwDownloadStatusThe status of the current or last software download.ro Enumeration .1.3.6.1.4.1.10728.2.1.1.2.5.1.7 |
redlineSystemSwDownloadTimeEndedThe date and time this software download finished.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.10728.2.1.1.2.5.1.8 |
redlineSystemSwDownloadFailureReasonThe short explanation of why software download failed. In a case of success this object will contain empty string.ro DisplayString .1.3.6.1.4.1.10728.2.1.1.2.5.1.9 |
redlineSystemConfigurationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.3 |
redlineSystemConfigBackupTableThis table contains at most one entry representing a configuration backup process that is either currently in progress or one that was completed. A management station can create this entry if and only if either the table is empty or the only entry is for a backup that has already been completed. An attempt to create or write this entry when a backup is already in progress results in the 'resourceUnavailable' error status. SEQUENCE OF RedlineSystemConfigBackupEntry .1.3.6.1.4.1.10728.2.1.1.3.1 |
redlineSystemConfigBackupEntryThis entry contains information about a current or last configuration backup. RedlineSystemConfigBackupEntry .1.3.6.1.4.1.10728.2.1.1.3.1.1 |
redlineSystemConfigBackupIndexThe index of the software download table. The only value allowed is 1. INTEGER (1) .1.3.6.1.4.1.10728.2.1.1.3.1.1.1 |
redlineSystemConfigBackupConfigTypeSpecifies the type of configuration to be backup.rw Enumeration .1.3.6.1.4.1.10728.2.1.1.3.1.1.2 |
redlineSystemConfigBackupFtpAddressTypeThe INET address type of the configuration backup FTP server. IPv4 type supported only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.3.1.1.3 |
redlineSystemConfigBackupFtpAddressThe INET address of the FTP server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.3.1.1.4 |
redlineSystemConfigBackupFtpUserThe FTP user name.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.3.1.1.5 |
redlineSystemConfigBackupFtpPasswordThe FTP user password. After this object is created it is not accessible.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.3.1.1.6 |
redlineSystemConfigBackupFtpFileThe full software image file path name as required by the FTP server.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.3.1.1.7 |
redlineSystemConfigBackupStatusThe status of the current or last configuration backup.ro Enumeration .1.3.6.1.4.1.10728.2.1.1.3.1.1.8 |
redlineSystemConfigBackupFailureReasonThe short explanation of why configuration backup failed. In a case of success this object will contain empty string.ro DisplayString .1.3.6.1.4.1.10728.2.1.1.3.1.1.9 |
redlineSystemConfigRestoreTableThis table contains at most one entry representing a configuration restore process that is either currently in progress or one that was completed. A management station can create this entry if and only if either the table is empty or the only entry is for a restore that has already been completed. An attempt to create or write this entry when a restore is already in progress results in the 'resourceUnavailable' error status. After the process is finished with the status set to 'success', then (and only then) the system will be automatically rebooted in order for the newly restored parameters to become active. SEQUENCE OF RedlineSystemConfigRestoreEntry .1.3.6.1.4.1.10728.2.1.1.3.2 |
redlineSystemConfigRestoreEntryThis entry contains information about a current or last configuration restore. RedlineSystemConfigRestoreEntry .1.3.6.1.4.1.10728.2.1.1.3.2.1 |
redlineSystemConfigRestoreIndexThe index of the software download table. The only value allowed is 1. INTEGER (1) .1.3.6.1.4.1.10728.2.1.1.3.2.1.1 |
redlineSystemConfigRestoreConfigTypeSpecifies the type of configuration to be restored.rw Enumeration .1.3.6.1.4.1.10728.2.1.1.3.2.1.2 |
redlineSystemConfigRestoreFtpAddressTypeThe INET address type of the configuration restore FTP server. IPv4 type supported only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.3.2.1.3 |
redlineSystemConfigRestoreFtpAddressThe INET address of the FTP server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.3.2.1.4 |
redlineSystemConfigRestoreFtpUserThe FTP user name.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.3.2.1.5 |
redlineSystemConfigRestoreFtpPasswordThe FTP user password. After this object is created it is not accessible.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.3.2.1.6 |
redlineSystemConfigRestoreFtpFileThe full software image file path name as required by the FTP server.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.3.2.1.7 |
redlineSystemConfigRestoreStatusThe status of the current or last configuration restore.ro Enumeration .1.3.6.1.4.1.10728.2.1.1.3.2.1.8 |
redlineSystemConfigRestoreFailureReasonThe short explanation of why configuration restore failed. In a case of success this object will contain empty string.ro DisplayString .1.3.6.1.4.1.10728.2.1.1.3.2.1.9 |
redlineSystemNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.4 |
redlineSystemTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.4.1 |
redlineSystemTrapReceiverTableThis table contains information about provisioned trap receivers i.e. the trap receivers that this agent will send notifications to. The entries of this table are indexed by their IP address and port values. The maximum number of entries in this table is eight. SEQUENCE OF RedlineSystemTrapReceiverEntry .1.3.6.1.4.1.10728.2.1.1.4.1.1 |
redlineSystemTrapReceiverEntryThis entry contains information about a provisioned trap receiver (a trap destination from the agent's point of view. RedlineSystemTrapReceiverEntry .1.3.6.1.4.1.10728.2.1.1.4.1.1.1 |
redlineSystemTrapReceiverIndex Unsigned32 .1.3.6.1.4.1.10728.2.1.1.4.1.1.1.1 |
redlineSystemTrapReceiverAddressTypeThe INET address type of the trap receiver.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.4.1.1.1.2 |
redlineSystemTrapReceiverAddressThe INET address of the trap receiver.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.4.1.1.1.3 |
redlineSystemTrapReceiverPortThe UDP port of the trap receiver.rw InetPortNumber .1.3.6.1.4.1.10728.2.1.1.4.1.1.1.4 |
redlineSystemTrapReceiverCommunityThe community string of the trap receiver.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.4.1.1.1.5 |
redlineSystemTrapReceiverStatusThis object is used to create and delete rows in the redlineSystemTrapReceiverTable table. Only the 'createAndGo' and 'destroy' values can be specified in a set operation when an entry is created or destroyed, respectively.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.10728.2.1.1.4.1.1.1.6 |
redlineSystemTrapActivationTableThis table contains information about trap activation in the system i.e. the trap generation can be enabled or disabled. The entries of this table are indexed by the trap OID. SEQUENCE OF RedlineSystemTrapActivationEntry .1.3.6.1.4.1.10728.2.1.1.4.1.2 |
redlineSystemTrapActivationEntryThis entry contains information about trap acgtivation state. RedlineSystemTrapActivationEntry .1.3.6.1.4.1.10728.2.1.1.4.1.2.1 |
redlineSystemTrapObjectIDIdentifies the trap which generation is to be controlled by this entry. OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.4.1.2.1.1 |
redlineSystemTrapEnableIndicates whether the system is permitted to generate traps specified by this entry.rw Enumeration .1.3.6.1.4.1.10728.2.1.1.4.1.2.1.2 |
redlineSystemPingTrapTriggerCauses a ping trap to be sentrw Enumeration .1.3.6.1.4.1.10728.2.1.1.4.1.999 |
redlineSystemTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.4.2 |
redlineSystemSwDownloadProgressThe software download progress states.ro Enumeration .1.3.6.1.4.1.10728.2.1.1.4.2.1 |
redlineSystemTrapDefinitions OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.4.3 |
redlineSWUpgradeStatusTrapEvent that reports SW Upgrade progress and status changes. NOTIFICATION-TYPE .1.3.6.1.4.1.10728.2.1.1.4.3.1 |
redlineSystemPingTrapA ping trap notification. NOTIFICATION-TYPE .1.3.6.1.4.1.10728.2.1.1.4.3.999 |
redlineSystemAccessControlObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.5 |
redlineSystemAccessCtrlTableThis table contains a list of hosts which are allowed to access the system. Each entry associated with the host, has ip address and read and write passwords. Only hosts identified by a right combination of ipAddress and password will be allowed to access the system. An entry can contain Ip address of '0.0.0.0'. In which case all hosts using password associated with this address will be granted access to the system. Initially, the table will contain only one entry with Ip address set to '0.0.0.0', read community set to 'public' and write community set to 'private'. The maximum number of entries in this table is eight SEQUENCE OF RedlineSystemAccessCtrlEntry .1.3.6.1.4.1.10728.2.1.1.5.5 |
redlineSystemAccessCtrlEntryThis entry contains privacy information about a host allowed to access the system. RedlineSystemAccessCtrlEntry .1.3.6.1.4.1.10728.2.1.1.5.5.1 |
redlineSystemAccessCtrlIndexThe index of the Snmp Access Control table. Unsigned32 (1 .. 8) .1.3.6.1.4.1.10728.2.1.1.5.5.1.1 |
redlineSystemAccessCtrlManagerIpAddrTypeThe INET address type of the host allowed to access the system. IPv4 type supported only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.5.5.1.2 |
redlineSystemAccessCtrlManagerIpAddrThe INET address of the host allowed to access the system.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.1.5.5.1.3 |
redlineSystemAccessCtrlReadCommunityThe read community string associated with redlineSystemAccessCtrlManagerIpAddress.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.5.5.1.4 |
redlineSystemAccessCtrlWriteCommunityThe write community string associated with redlineSystemAccessCtrlManagerIpAddress.rw DisplayString .1.3.6.1.4.1.10728.2.1.1.5.5.1.5 |
redlineSystemAccessCtrlStatusThis object is used to create and delete rows in the redlineSystemTrapReceiverTable table. Only the 'createAndGo' and 'destroy' values can be specified in a set operation when an entry is created or destroyed, respectively.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.10728.2.1.1.5.5.1.6 |
redlineSystemConformance OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.6 |
redlineSystemGroups OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.6.1 |
redlineSystemBasicGroupBasic objects. Unknown .1.3.6.1.4.1.10728.2.1.1.6.1.1 |
redlineSystemNotificationGroup Unknown .1.3.6.1.4.1.10728.2.1.1.6.1.2 |
redlineSystemCompls OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.1.6.2 |
redlineSystemComplianceThe compliance statement for SNMP entities that implement this MIB module. Unknown .1.3.6.1.4.1.10728.2.1.1.6.2.1 |