REDLINE-BS-MIB
This MIB module contains object definitions applicable only to Redline Base Station.
Main OID:
redlineBsMib.1.3.6.1.4.1.10728.2.1.2
79
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
79 total| Object Name |
|---|
redlineBsMibThis MIB module contains object definitions applicable only to Redline Base Station. MODULE-IDENTITY .1.3.6.1.4.1.10728.2.1.2 |
redlineBsDhcpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.1 |
redlineBsIpAddressSourceSetting this variable to 1 causes the Base Station to obatain its ip address from DHCP server.rw Enumeration .1.3.6.1.4.1.10728.2.1.2.1.1 |
redlineBsDhcpPacketsRelaySetting this variable to 1 causes the Base Station to act as DHCP relay agent for SS. Note: This object can not be set to 'relay' if usage of DHCP server is disabled. An attempt to set the address will fail and return 'resourceUnavailable' errorrw Enumeration .1.3.6.1.4.1.10728.2.1.2.1.2 |
redlineBsSntpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.2 |
redlineBsRefreshTimeSetting this variable to 1 causes the Base Station to reconect to time server and synchronize the timerw Enumeration .1.3.6.1.4.1.10728.2.1.2.2.1 |
redlineBsDayLightSavingThis variable indicates if Dalight saving is on.rw Enumeration .1.3.6.1.4.1.10728.2.1.2.2.2 |
redlineBsTimezoneThis variable is a time zone set as +/- hours from Greenwich Mean Time (GMT). Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the timezone will fail and return 'resourceUnavailable' errorrw INTEGER .1.3.6.1.4.1.10728.2.1.2.2.3 |
redlineBsTimeServerIpAddressTypeThe INET address type of Ip address of time server. IPv4 type supported only.rw InetAddressType { ipv4(1) } .1.3.6.1.4.1.10728.2.1.2.2.4 |
redlineBsTimeServerIpAddressThe INET address of time server to whom Bs will communicate using SNTP protocol to obtain the GMT time.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.10728.2.1.2.2.5 |
redlineBsTimezoneMinThis variable contains a minutes part of time zone defined in 'redlineBsTimezone'. Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the timezone will fail and return 'resourceUnavailable' errorrw INTEGER .1.3.6.1.4.1.10728.2.1.2.2.6 |
redlineBsConfigSaveObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.3 |
redlineBsSnmpConfigSaveSetting this variable to 1 causes SNMP Configuration to be save in flash.rw Enumeration .1.3.6.1.4.1.10728.2.1.2.3.1 |
redlineBsSfConfigSaveSetting this variable to 2 causes Service Flow Configuration to be saved in flash.rw Enumeration .1.3.6.1.4.1.10728.2.1.2.3.2 |
redlineBsSystemObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.4 |
redlineBsRadioTypeThis object indicates the radio type of Redline Bs.ro OCTET STRING .1.3.6.1.4.1.10728.2.1.2.4.1 |
redlineBsRfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.5 |
redlineBsDownlinkChanFreqCurrent downlink channel frequency (kHz)ro Unsigned32 UNITS "kHz" .1.3.6.1.4.1.10728.2.1.2.5.1 |
redlineBsUplinkChanFreqCurrent uplink channel frequency (kHz)ro Unsigned32 UNITS "kHz" .1.3.6.1.4.1.10728.2.1.2.5.2 |
redlineBsPhyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.6 |
redlineBsChannelSizeCurrent channel size (Khz).ro Unsigned32 UNITS "KHz" .1.3.6.1.4.1.10728.2.1.2.6.1 |
redlineBsEthObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.7 |
redlineBsManagementAccessIndicates current management access configuration( either data or mgt port.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.7.1 |
redlineBsDataPortSettingsIndicates current settings of data port.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.7.2 |
redlineBsMgtPortSettingsIndicates current settings of mgt port.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.7.3 |
redlineBsVlanObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.8 |
redlineBsVlanTrafficTaggingIndicates that management with VLAN tagged traffic is enabled.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.8.1 |
redlineBsVlanIdVLAN identifier used to tag managment traffic.ro Unsigned32 .1.3.6.1.4.1.10728.2.1.2.8.2 |
redlineBsSmcObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.9 |
redlineBsSmcCurrentOperModeIndicates BS SMC (Secondary Management Channel) operation window. At the beginning of a maintenance window (upgrade, config backup etc), the SMC will be assigned maximum bandwidth to the predetermined fixed rate. At the end of the maintenance window, the maximum bandwidth for the SMC will be reset to its normal rate.rw Enumeration .1.3.6.1.4.1.10728.2.1.2.9.1 |
redlineBsPowerSupplyAndCoolingObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.10 |
redlineBsPowerSupplyTableThis table contains identification and status information about base station power supplies. A trap will be generated each time the power supply goes on or off. The traps generation can be enabled/disabled using Redline Trap Activation Table. SEQUENCE OF RedlineBsPowerSupplyEntry .1.3.6.1.4.1.10728.2.1.2.10.1 |
redlineBsPowerSupplyEntryThis entry contains status information about base station power supply. RedlineBsPowerSupplyEntry .1.3.6.1.4.1.10728.2.1.2.10.1.1 |
redlineBsPowerSupplyIndexThe index of the BS power supply table. Integer32 .1.3.6.1.4.1.10728.2.1.2.10.1.1.1 |
redlineBsPowerSupplyNameTextual identification of base station power supply.ro DisplayString .1.3.6.1.4.1.10728.2.1.2.10.1.1.2 |
redlineBsPowerSupplyTypeThe power supply type.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.10.1.1.3 |
redlineBsPowerSupplyStatusIndicates if the power supply is on/off.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.10.1.1.4 |
redlineBsTemperatureTableThis table contains information about current temperature of base station hardware units. SEQUENCE OF RedlineBsTemperatureEntry .1.3.6.1.4.1.10728.2.1.2.10.2 |
redlineBsTemperatureEntryThis entry contains temperature information about single base station hardware unit. RedlineBsTemperatureEntry .1.3.6.1.4.1.10728.2.1.2.10.2.1 |
redlineBsUnitIndexThe index of the BS current temperature table. Integer32 .1.3.6.1.4.1.10728.2.1.2.10.2.1.1 |
redlineBsUnitNameThe base station hardware unit name.ro DisplayString .1.3.6.1.4.1.10728.2.1.2.10.2.1.2 |
redlineBsUnitTypeThe base station hardware unit type.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.10.2.1.3 |
redlineBsCurrTemperatureIndicates the current temperature of base station hardware unit in Celsius.ro Integer32 (-60..100) UNITS "degrees Celsius" .1.3.6.1.4.1.10728.2.1.2.10.2.1.4 |
redlineBsTempThresholdTableThis table contains various temperature threshold which are used to trigger traps to alarm network manager about unit mulfunction. The table is indexed by 'redlineBsUnitIndex' and 'redlineBsTempThresholdIndex' objects. Some of the traps require clearing after the temperature is going back to normal. The traps can be enabled/disabled using Redline Trap Activation table. SEQUENCE OF RedlineBsTempThresholdEntry .1.3.6.1.4.1.10728.2.1.2.10.3 |
redlineBsTempThresholdEntryThis entry contains single base station hardware unit temperarure threshold information. RedlineBsTempThresholdEntry .1.3.6.1.4.1.10728.2.1.2.10.3.1 |
redlineBsTempThresholdIndexThe index of the temperature threshold table. Integer32 .1.3.6.1.4.1.10728.2.1.2.10.3.1.1 |
redlineBsTempTrapThresholdIndicates the temperature threshold value which will be used to trigger a trap.ro Integer32 (-60..100) UNITS "degrees Celsius" .1.3.6.1.4.1.10728.2.1.2.10.3.1.2 |
redlineBsTempTrapClrThresholdIndicates the temperature threshold value which will be used to clear a previosly generated trap.ro Integer32 (-60..100) UNITS "degrees Celsius" .1.3.6.1.4.1.10728.2.1.2.10.3.1.3 |
redlineBsTempThresholdNameTextual identification of temperature threshold.ro DisplayString .1.3.6.1.4.1.10728.2.1.2.10.3.1.4 |
redlineBsTemperatureTrapTriggerIndicates if temperature traversal in upper or lower value direction is causing the trap.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.10.3.1.5 |
redlineBsFanTableThis table contains name and status information about base station cooling fans. Up to 3 entries are supported. SEQUENCE OF RedlineBsFanEntry .1.3.6.1.4.1.10728.2.1.2.10.4 |
redlineBsFanEntryThis entry contains information about single cooling fan. RedlineBsFanEntry .1.3.6.1.4.1.10728.2.1.2.10.4.1 |
redlineBsFanIndexThe index of the colling fans table. Integer32 .1.3.6.1.4.1.10728.2.1.2.10.4.1.1 |
redlineBsFanNameTextual identification of base station fan.ro DisplayString .1.3.6.1.4.1.10728.2.1.2.10.4.1.2 |
redlineBsFanStatusIndicates the base station fan is on/off.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.10.4.1.3 |
redlineBsNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.11 |
redlineBsTrapDefinitions OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.11.0 |
redlineBsPowerSupplyStatusTrapEvent that reports base station power supply status change (on/off). NOTIFICATION-TYPE .1.3.6.1.4.1.10728.2.1.2.11.0.1 |
redlineBsTempThresholdTrapEvent that reports SW Upgrade progress and status changes. NOTIFICATION-TYPE .1.3.6.1.4.1.10728.2.1.2.11.0.2 |
redlineBsTrapMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.11.1 |
redlineBsTrapTypeIndicates if the trap is for alarm condition or for its clearing.ro Enumeration .1.3.6.1.4.1.10728.2.1.2.11.1.1 |
redlineBsTrapPowerSupplyIndexThe index in the table representing BS power supply triggering the trap.ro Integer32 .1.3.6.1.4.1.10728.2.1.2.11.1.2 |
redlineBsTrapUnitIndexThe index of temperature table representing BS unit triggering the trap.ro Integer32 .1.3.6.1.4.1.10728.2.1.2.11.1.3 |
redlineBsTrapTempThresholdIndexThe index of the temperature threshold table representing the temperature threshold which passing is triggering the trap.ro Integer32 .1.3.6.1.4.1.10728.2.1.2.11.1.4 |
redlineBsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.12 |
redlineBsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.12.1 |
redlineBsDhcpGroupDhcp objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.1 |
redlineBsSntpGroupSntp objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.2 |
redlineBsConfigSaveGroupConfig save objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.3 |
redlineBsSystemGroupConfig save objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.4 |
redlineBsRfGroupConfig save objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.5 |
redlineBsPhyGroupConfig save objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.6 |
redlineBsEthGroupEthernet interface objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.7 |
redlineBsVlanGroupVlan objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.8 |
redlineBsSmcGroupSmc objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.9 |
redlineBsPowerSupplyAndCoolingGroupPower supply, temperature and fans objects. Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.10 |
redlineBsNotificationGroup Unknown .1.3.6.1.4.1.10728.2.1.2.12.1.11 |
redlineBsCompls OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.1.2.12.2 |
redlineBsComplianceThe compliance statement for SNMP entities that implement this MIB module. Unknown .1.3.6.1.4.1.10728.2.1.2.12.2.1 |