REDLINE-E1T1-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
68
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
redline OBJECT IDENTIFIER .1.3.6.1.4.1.10728 |
SNMPv2-TC Unknown .1.3.6.1.4.1.10728 |
redlineProducts OBJECT IDENTIFIER .1.3.6.1.4.1.10728.1 |
redlineMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2 |
redlineE1T1 OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.52 |
e1t1General OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.52.1 |
e1t1VlanIdDataVLAN ID for data on E1/T1 modulerw INTEGER .1.3.6.1.4.1.10728.2.52.1.1 |
e1t1VlanIdVoiceVLAN ID for voice on E1/T1 modulerw INTEGER .1.3.6.1.4.1.10728.2.52.1.2 |
e1t1ClockClocking information on the E1/T1 modulerw INTEGER .1.3.6.1.4.1.10728.2.52.1.3 |
e1t1SyncOnThe number of serial interface to be used as clocking reference.
For AN-50 the number of serial interfaces is 4rw INTEGER .1.3.6.1.4.1.10728.2.52.1.4 |
e1t1IdleCodeIdle Code for unused timeslots on the E1/T1 modulerw INTEGER .1.3.6.1.4.1.10728.2.52.1.5 |
e1t1HostnameE1/T1 host namerw OCTET STRING .1.3.6.1.4.1.10728.2.52.1.6 |
e1t1IpAddressE1/T1 IP addressrw IpAddress .1.3.6.1.4.1.10728.2.52.1.7 |
e1t1IpMaskE1/T1 IP maskrw IpAddress .1.3.6.1.4.1.10728.2.52.1.8 |
e1t1IpGatewayE1/T1 gateway.rw IpAddress .1.3.6.1.4.1.10728.2.52.1.9 |
e1t1OptionKeyE1/T1 Option Key.ro INTEGER .1.3.6.1.4.1.10728.2.52.1.10 |
e1t1LineThe type of the line (T1/E1).rw INTEGER .1.3.6.1.4.1.10728.2.52.1.11 |
e1t1SoftwareVersionE1/T1 module Software Version.ro OCTET STRING .1.3.6.1.4.1.10728.2.52.1.12 |
e1t1SerialTableTable T1 / E1 Channels. SEQUENCE OF E1T1SerialEntry .1.3.6.1.4.1.10728.2.52.2 |
e1t1SerialEntryA unique set of link parameters. E1T1SerialEntry .1.3.6.1.4.1.10728.2.52.2.1 |
e1t1SerialIDSerial ID.ro INTEGER .1.3.6.1.4.1.10728.2.52.2.1.1 |
e1t1SerialCodingSerial Coding.rw INTEGER .1.3.6.1.4.1.10728.2.52.2.1.2 |
e1t1SerialFramingSerial Framing.rw INTEGER .1.3.6.1.4.1.10728.2.52.2.1.3 |
e1t1SerialLBOSerial LBO.rw INTEGER .1.3.6.1.4.1.10728.2.52.2.1.4 |
e1t1GroupTableTable E1 Groups. SEQUENCE OF E1T1GroupEntry .1.3.6.1.4.1.10728.2.52.3 |
e1t1GroupEntryA unique set of link parameters. E1T1GroupEntry .1.3.6.1.4.1.10728.2.52.3.1 |
e1t1GroupIDGroup ID.ro INTEGER .1.3.6.1.4.1.10728.2.52.3.1.1 |
e1t1GroupTsBeginGroup Ts Begin.rw INTEGER .1.3.6.1.4.1.10728.2.52.3.1.2 |
e1t1GroupTsNumGroup Ts Num.rw INTEGER .1.3.6.1.4.1.10728.2.52.3.1.3 |
e1t1GroupDestGroupGroup Destination.rw INTEGER .1.3.6.1.4.1.10728.2.52.3.1.4 |
e1t1GroupDestIpGroup Destination Ip Address.rw IpAddress .1.3.6.1.4.1.10728.2.52.3.1.5 |
e1t1GroupJitterBufferGroup Jitter Buffer in ms.rw INTEGER .1.3.6.1.4.1.10728.2.52.3.1.6 |
e1t1GroupPacketLengthGroup Jitter Buffer in bytes.rw INTEGER .1.3.6.1.4.1.10728.2.52.3.1.7 |
e1t1GroupRowStatusStatus of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.10728.2.52.3.1.8 |
e1t1StatsTableTable of statistics for E1/T1 interfaces. SEQUENCE OF E1T1StatsEntry .1.3.6.1.4.1.10728.2.52.4 |
e1t1StatsEntryA unique set of statistics of link parameters. E1T1StatsEntry .1.3.6.1.4.1.10728.2.52.4.1 |
e1t1SerialStatsIDSerial Interface Statistics ID.ro INTEGER .1.3.6.1.4.1.10728.2.52.4.1.1 |
e1t1TdmsLOSE1/T1 module loss of signal.ro INTEGER .1.3.6.1.4.1.10728.2.52.4.1.2 |
e1t1TdmsLFAE1/T1 module loss of framing alignment.ro INTEGER .1.3.6.1.4.1.10728.2.52.4.1.3 |
e1t1TdmsLOMFE1/T1 module loss of multiframming.ro INTEGER .1.3.6.1.4.1.10728.2.52.4.1.4 |
e1t1TdmsRAIE1/T1 module remote alarm indication.ro INTEGER .1.3.6.1.4.1.10728.2.52.4.1.5 |
e1t1TdmsAISE1/T1 module alarm indication signal.ro INTEGER .1.3.6.1.4.1.10728.2.52.4.1.6 |
e1t1TdmsESE1/T1 module errored seconds.ro INTEGER .1.3.6.1.4.1.10728.2.52.4.1.7 |
e1t1TdmsFECE1/T1 module framing error counter.ro INTEGER .1.3.6.1.4.1.10728.2.52.4.1.8 |
e1t1TdmsCVCE1/T1 module code violation counter.ro INTEGER .1.3.6.1.4.1.10728.2.52.4.1.9 |
e1t1Stats OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.52.5 |
e1t1EthRateEthernet rate for the E1/T1 module.
0 = 10 Mbps
1 = 100 Mbpsro INTEGER .1.3.6.1.4.1.10728.2.52.5.1 |
e1t1EthModeE1/T1 module mode.
0 - half duplex
1 - full duplexro INTEGER .1.3.6.1.4.1.10728.2.52.5.2 |
e1t1EthStateE1/T1 module state.
0 - not connected
1 - connectedro INTEGER .1.3.6.1.4.1.10728.2.52.5.3 |
e1t1EthMACE1/T1 module MAC Address.ro INTEGER .1.3.6.1.4.1.10728.2.52.5.4 |
e1t1EthFROKE1/T1 module frames received OK (FROK).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.5 |
e1t1EthBROKE1/T1 module bytes received OK (BROK).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.6 |
e1t1EthAERRE1/T1 module alignment errors (AERR).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.7 |
e1t1EthCERRE1/T1 module CRC errors (CERR).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.8 |
e1t1EthFTOKE1/T1 module frames transmitted OK (FTOK).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.9 |
e1t1EthBTOKE1/T1 module bytes transmitted OK (BTOK).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.10 |
e1t1EthSCOLE1/T1 module single collisions (SCOL).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.11 |
e1t1EthMCOLE1/T1 module multiple collisions (MCOL).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.12 |
e1t1EthTDEFE1/T1 module transmissions deferred (TDEF).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.13 |
e1t1EthLCOLE1/T1 module late collisions (LCOL).ro INTEGER .1.3.6.1.4.1.10728.2.52.5.14 |
e1t1FanStatusT1E1 Fan Status (off/on).ro Enumeration .1.3.6.1.4.1.10728.2.52.5.15 |
e1t1LastSaveErrThe Error code from the last TDM SAVE Command.ro INTEGER .1.3.6.1.4.1.10728.2.52.5.16 |
e1t1Commands OBJECT IDENTIFIER .1.3.6.1.4.1.10728.2.52.6 |
e1t1SaveConfigSave the running configuration in flash.rw Enumeration .1.3.6.1.4.1.10728.2.52.6.1 |
e1t1ActivateConfigActivate temporary configuration in running configuration.rw Enumeration .1.3.6.1.4.1.10728.2.52.6.2 |
e1t1ResetBoardReset the E1/T1 module.rw Enumeration .1.3.6.1.4.1.10728.2.52.6.3 |
e1t1ResetStatsReset Statistics for the E1/T1 module.rw INTEGER .1.3.6.1.4.1.10728.2.52.6.4 |
e1t1ReStartConfigReStart the configuration operation for the E1/T1 module.rw Enumeration .1.3.6.1.4.1.10728.2.52.6.5 |