Home/Catalog/RC-OSPF-MIB

RC-OSPF-MIB

Enterprise MIB for the Accelar product family.
Main OID:
rcOspfMib.rcOspf.1
106
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

106 total
Object Name
rcIpConfOspfTableA table used to maintain OSPF information for a particular interface.
SEQUENCE OF RcIpConfOspfEntry
.1.3.6.1.4.1.2272.1.8.1.2
rcIpConfOspfEntryEntry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface.
RcIpConfOspfEntry
.1.3.6.1.4.1.2272.1.8.1.2.1
rcIpConfOspfIfIndexAn unique value to identify a physical interface or a logical interface (VLAN).ro
InterfaceIndexOrZero
.1.3.6.1.4.1.2272.1.8.1.2.1.1
rcIpConfOspfRtrPriorityThe priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.rw
INTEGER (0..'FF'h)
.1.3.6.1.4.1.2272.1.8.1.2.1.2
rcIpConfOspfMetricThe metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfOspfDefaultMetric) will be used as metric value, when the state of the interface is up.rw
INTEGER (0..'FFFF'h)
.1.3.6.1.4.1.2272.1.8.1.2.1.3
rcIpConfOspfAuthKeyThe Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey always returns an Octet String of length zero.rw
DisplayString
.1.3.6.1.4.1.2272.1.8.1.2.1.4
rcIpConfOspfRowStatusRow status for this entry.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2272.1.8.1.2.1.5
rcIpConfOspfHelloIntervalThe length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.rw
INTEGER (1..'FFFF'h)
.1.3.6.1.4.1.2272.1.8.1.2.1.6
rcIpConfOspfRtrDeadIntervalThe number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.rw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.2272.1.8.1.2.1.7
rcIpConfOspfIfAreaIdA 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.rw
IpAddress
.1.3.6.1.4.1.2272.1.8.1.2.1.8
rcIpConfOspfAuthTypeThe authentication type specified for an interface. Additional authentication types may be assigned locally.rw
Enumeration
.1.3.6.1.4.1.2272.1.8.1.2.1.9
rcIpConfOspfPollIntervalOSPF NBMA Interface Poll Interval.rw
INTEGER
.1.3.6.1.4.1.2272.1.8.1.2.1.10
rcIpConfOspfIfMtuIgnoreMtu-ignore flag is for ignoring the mtu checking in ospf bdbrw
Enumeration
.1.3.6.1.4.1.2272.1.8.1.2.1.11
rcIpConfOspfDefaultMetric
OBJECT IDENTIFIER
.1.3.6.1.4.1.2272.1.8.1.3
rcIpConfOspfDefaultMetric10MegPortUsed to indicate the cost associated with 10Meg Interface(Port).rw
INTEGER (1..'FFFF'h)
.1.3.6.1.4.1.2272.1.8.1.3.1
rcIpConfOspfDefaultMetric100MegPortUsed to indicate the cost associated with 100Meg Interface(Port).rw
INTEGER (1..'FFFF'h)
.1.3.6.1.4.1.2272.1.8.1.3.2
rcIpConfOspfDefaultMetric1000MegPortUsed to indicate the cost associated with 1000Meg Interface(Port).rw
INTEGER (1..'FFFF'h)
.1.3.6.1.4.1.2272.1.8.1.3.3
rcIpConfOspfDefaultMetric10000MegPortUsed to indicate the cost associated with 10000Meg Interface(Port).rw
INTEGER (1..'FFFF'h)
.1.3.6.1.4.1.2272.1.8.1.3.4
rcIpConfOspf
OBJECT IDENTIFIER
.1.3.6.1.4.1.2272.1.8.1.4
rcIpConfOspfTrapEnableUsed to indicate whether Ospf Traps should be sent.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2272.1.8.1.4.1
rcIpConfOspfAutoVirtLinkEnableUsed to indicate whether auto virtual link creation is enabled or not. If set to true OSPF will create virtual links between ABRs whether it is needed or not, but adjacency will established only when one of the ABR losses connection to backbone area. If set to false then it is user resposibity to create virtual link whenever needed.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2272.1.8.1.4.2
rcIpConfOspfSpfHoldDownTimeThe SPF Hold Down Timer value. The SPF will run at most once per hold down timer value.rw
INTEGER
.1.3.6.1.4.1.2272.1.8.1.4.3
rcIpConfOspfActionrw
Enumeration
.1.3.6.1.4.1.2272.1.8.1.4.4
rcIpConfOspfRfc1583CompatibilityControls the preference rules used when choosing among multiple AS-External-LSAs advertising the same destination. When this is enabled, the preference rule will be same as specified by RFC1583. When disabled, the new preference rule as described in RFC2328 will be applicable, which potentially prevents the routing loops when AS-External-LSAs for the same destination have been originated from different areas.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2272.1.8.1.4.5
rcIpConfOspfAreaTableA table used to maintain OSPF information for a particular Area.
SEQUENCE OF RcIpConfOspfAreaEntry
.1.3.6.1.4.1.2272.1.8.1.7
rcIpConfOspfAreaEntryEntry containing OSPF Area configuration information. An entry is automatically created in this table when an area is configured through ospfAreaTable in (rfc1253rcc.mib).
RcIpConfOspfAreaEntry
.1.3.6.1.4.1.2272.1.8.1.7.1
rcIpConfOspfAreaIdAn unique value to identify an area. Area ID 0.0.0.0 is used for the OSPF backbone.ro
IpAddress
.1.3.6.1.4.1.2272.1.8.1.7.1.1
rcIpConfOspfAreaImportSummaryThe area's support for importing Summary advertisements into a stub area. This field should be used only if ospfImportASExtern is set to FALSErw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2272.1.8.1.7.1.2
rcIpConfOspfAreaActiveIfCountThis variable displays the number of active interfaces configured in this area. An area cannot be deleted if this value is > 0.ro
Integer32
.1.3.6.1.4.1.2272.1.8.1.7.1.3
rcIpConfOspfV2TableA table used to maintain OSPF information for a particular interface.deprecated
SEQUENCE OF RcIpConfOspfV2Entry
.1.3.6.1.4.1.2272.1.8.1.9
rcIpConfOspfV2EntryEntry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface.deprecated
RcIpConfOspfV2Entry
.1.3.6.1.4.1.2272.1.8.1.9.1
rcIpConfOspfV2IfIndexAn unique value to identify a physical interface or a logical interface (VLAN).rodeprecated
InterfaceIndexOrZero
.1.3.6.1.4.1.2272.1.8.1.9.1.1
rcIpConfOspfV2IpAddrIpAddress of the IP interface.rodeprecated
IpAddress
.1.3.6.1.4.1.2272.1.8.1.9.1.2
rcIpConfOspfV2RtrPriorityThe priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.rwdeprecated
INTEGER (0..'FF'h)
.1.3.6.1.4.1.2272.1.8.1.9.1.3
rcIpConfOspfV2MetricThe metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfOspfV2DefaultMetric) will be used as metric value, when the state of the interface is up.rwdeprecated
INTEGER (0..'FFFF'h)
.1.3.6.1.4.1.2272.1.8.1.9.1.4
rcIpConfOspfV2AuthKeyThe Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero.rwdeprecated
DisplayString
.1.3.6.1.4.1.2272.1.8.1.9.1.5
rcIpConfOspfV2RowStatusRow status for this entry.rwdeprecated
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2272.1.8.1.9.1.6
rcIpConfOspfV2HelloIntervalThe length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.rwdeprecated
INTEGER (1..'FFFF'h)
.1.3.6.1.4.1.2272.1.8.1.9.1.7
rcIpConfOspfV2RtrDeadIntervalThe number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.rwdeprecated
INTEGER (1..'7FFFFFFF'h)
.1.3.6.1.4.1.2272.1.8.1.9.1.8
rcIpConfOspfV2IfAreaIdA 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.rwdeprecated
IpAddress
.1.3.6.1.4.1.2272.1.8.1.9.1.9
rcIpConfOspfV2AuthTypeThe authentication type specified for an interface. Additional authentication types may be assigned locally.rwdeprecated
Enumeration
.1.3.6.1.4.1.2272.1.8.1.9.1.10
rcIpConfOspfAreaAggregateTableA table used to maintain OSPF summary route metric parameter for a particular Area range.
SEQUENCE OF RcIpConfOspfAreaAggregateEntry
.1.3.6.1.4.1.2272.1.8.1.10
rcIpConfOspfAreaAggregateEntryEntry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configured through ospfAreaAggregateTable in rfc1850rcc.mib
RcIpConfOspfAreaAggregateEntry
.1.3.6.1.4.1.2272.1.8.1.10.1
rcIpConfOspfAreaAggregateAreaIDThe Area the Address Aggregate is to be found within.ro
IpAddress
.1.3.6.1.4.1.2272.1.8.1.10.1.1
rcIpConfOspfAreaAggregateLsdbTypeThe type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.ro
Enumeration
.1.3.6.1.4.1.2272.1.8.1.10.1.2
rcIpConfOspfAreaAggregateNetThe IP Address of the Net or Subnet indicated by the range.ro
IpAddress
.1.3.6.1.4.1.2272.1.8.1.10.1.3
rcIpConfOspfAreaAggregateMaskThe Subnet Mask that pertains to the Net or Subnet.ro
IpAddress
.1.3.6.1.4.1.2272.1.8.1.10.1.4
rcIpConfOspfAreaAggregateAdvertiseMetricUsed to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest point in the networks being summarized as the metric.rw
INTEGER(0 .. 65535)
.1.3.6.1.4.1.2272.1.8.1.10.1.5
rcIpConfOspfAreaAggregateEffectSubnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area.rw
Enumeration
.1.3.6.1.4.1.2272.1.8.1.10.1.6
rcStatOspf
OBJECT IDENTIFIER
.1.3.6.1.4.1.2272.1.12.3
rcStatOspfBuffersAllocatedUsed to indicate the number of buffers allocated for OSPF.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.1
rcStatOspfBuffersFreedUsed to indicate the number of buffers that are freed by the OSPF.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.2
rcStatOspfBufferAllocFailuresUsed to indicate the number of times that OSPF has failed to allocate buffers.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.3
rcStatOspfBufferFreeFailuresUsed to indicate the number of times that OSPF has failed to free buffers.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.4
rcStatOspfTxPacketsUsed to indicate the number of packets transmitted by OSPF.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.5
rcStatOspfRxPacketsUsed to indicate the number of packets received by OSPF.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.6
rcStatOspfTxDropPacketsUsed to indicate the number of packets dropped before transmitted by OSPF.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.7
rcStatOspfRxDropPacketsUsed to indicate the number of packets dropped before received by OSPF.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.8
rcStatOspfRxBadPacketsUsed to indicate the number of packets received by OSPF that are bad.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.9
rcStatOspfSpfRunsUsed to indicate the total number of SPF calculatations performed by OSPF, which also includes the number of partial route table calculation for Incremental Updates.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.10
rcStatOspfLastSpfRunUsed to indicate the time(SysUpTime) since the last spf calculated by OSPF.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.2272.1.12.3.11
rcStatOspfLsdbTblSizeUsed to indicate the number of entries in the linkstate database table.ro
Counter32
.1.3.6.1.4.1.2272.1.12.3.12
rcStatOspfIfTableA table used to store OSPF interface statistics.
SEQUENCE OF RcStatOspfIfEntry
.1.3.6.1.4.1.2272.1.12.5
rcStatOspfIfEntryOspf interface statistics
RcStatOspfIfEntry
.1.3.6.1.4.1.2272.1.12.5.1
rcStatOspfIfIndexAn unique value that is used to identify a physical interface.ro
InterfaceIndexOrZero
.1.3.6.1.4.1.2272.1.12.5.1.1
rcStatOspfIfRxHellosUsed to indicate the number hello packets received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.2
rcStatOspfIfRxDBDescrsUsed to indicate the number database descriptor packets received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.3
rcStatOspfIfRxLSUpdatesUsed to indicate the number Link state update packets received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.4
rcStatOspfIfRxLSReqsUsed to indicate the number Link state request packets received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.5
rcStatOspfIfRxLSAcksUsed to indicate the number Link state acknowlege packets received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.6
rcStatOspfIfTxHellosUsed to indicate the number hello packets transmitted by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.7
rcStatOspfIfTxDBDescrsUsed to indicate the number database descriptor packets transmitted by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.8
rcStatOspfIfTxLSUpdatesUsed to indicate the number Link state update packets transmitted by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.9
rcStatOspfIfTxLSReqsUsed to indicate the number Link state request packets transmitted by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.10
rcStatOspfIfTxLSAcksUsed to indicate the number Link state acknowlege packets transmitted by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.11
rcStatOspfIfVersionMismatchesUsed to indicate the number version mismatches received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.12
rcStatOspfIfAreaMismatchesUsed to indicate the number area mismatches received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.13
rcStatOspfIfAuthTypeMismatchesUsed to indicate the number AuthType mismatches received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.14
rcStatOspfIfAuthFailuresUsed to indicate the number Authentication failures.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.15
rcStatOspfIfNetMaskMismatchesUsed to indicate the number net mask mismatches received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.16
rcStatOspfIfHelloIntervalMismatchesUsed to indicate the number hello interval mismatches received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.17
rcStatOspfIfDeadIntervalMismatchesUsed to indicate the number dead interval mismatches received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.18
rcStatOspfIfOptionMismatchesUsed to indicate the number options mismatches received by this interface.ro
Counter32
.1.3.6.1.4.1.2272.1.12.5.1.19
rcStatOspfIfV2TableA table used to store OSPF interface statistics.deprecated
SEQUENCE OF RcStatOspfIfV2Entry
.1.3.6.1.4.1.2272.1.12.7
rcStatOspfIfV2EntryOspf interface statisticsdeprecated
RcStatOspfIfV2Entry
.1.3.6.1.4.1.2272.1.12.7.1
rcStatOspfIfV2IndexAn unique value that is used to identify a physical interface.rodeprecated
InterfaceIndexOrZero
.1.3.6.1.4.1.2272.1.12.7.1.1
rcStatOspfIfV2AddrIp Addressrodeprecated
IpAddress
.1.3.6.1.4.1.2272.1.12.7.1.2
rcStatOspfIfV2RxHellosUsed to indicate the number hello packets received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.3
rcStatOspfIfV2RxDBDescrsUsed to indicate the number database descriptor packets received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.4
rcStatOspfIfV2RxLSUpdatesUsed to indicate the number Link state update packets received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.5
rcStatOspfIfV2RxLSReqsUsed to indicate the number Link state request packets received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.6
rcStatOspfIfV2RxLSAcksUsed to indicate the number Link state acknowlege packets received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.7
rcStatOspfIfV2TxHellosUsed to indicate the number hello packets transmitted by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.8
rcStatOspfIfV2TxDBDescrsUsed to indicate the number database descriptor packets transmitted by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.9
rcStatOspfIfV2TxLSUpdatesUsed to indicate the number Link state update packets transmitted by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.10
rcStatOspfIfV2TxLSReqsUsed to indicate the number Link state request packets transmitted by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.11
rcStatOspfIfV2TxLSAcksUsed to indicate the number Link state acknowlege packets transmitted by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.12
rcStatOspfIfV2VersionMismatchesUsed to indicate the number version mismatches received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.13
rcStatOspfIfV2AreaMismatchesUsed to indicate the number area mismatches received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.14
rcStatOspfIfV2AuthTypeMismatchesUsed to indicate the number AuthType mismatches received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.15
rcStatOspfIfV2AuthFailuresUsed to indicate the number Authentication failures.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.16
rcStatOspfIfV2NetMaskMismatchesUsed to indicate the number net mask mismatches received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.17
rcStatOspfIfV2HelloIntervalMismatchesUsed to indicate the number hello interval mismatches received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.18
rcStatOspfIfV2DeadIntervalMismatchesUsed to indicate the number dead interval mismatches received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.19
rcStatOspfIfV2OptionMismatchesUsed to indicate the number options mismatches received by this interface.rodeprecated
Counter32
.1.3.6.1.4.1.2272.1.12.7.1.20
rcOspfMibEnterprise MIB for the Accelar product family.
MODULE-IDENTITY
.rcOspf.1
RC-OSPF-MIB - SNMP MIB Reference | MIBs Explorer