RC-IP-UDP-MIB
Enterprise MIB for the Accelar product family.
Main OID:
rcIpUdpMib.1.3.6.1.4.1.2272.1.8.13.0
40
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
40 total| Object Name |
|---|
rcIpUdpMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.8.13.0 |
rcIpUdpProtocolTableSizeUsed to indicate the number of entries in the
rcIpUdpProtocolTable.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.1 |
rcIpUdpProtocolTablelist of UDP protocols. Used to determine whether to
forward the UDP broadcast packet or not. SEQUENCE OF RcIpUdpProtocolEntry .1.3.6.1.4.1.2272.1.8.13.2 |
rcIpUdpProtocolEntryUsed to include a particular UDP port in the table.
An entry in this table indicates that the box might do
forwarding of UDP broadcast packets if there is a
matching entry for this packet in the
rcIpUdpPortFwdTable. RcIpUdpProtocolEntry .1.3.6.1.4.1.2272.1.8.13.2.1 |
rcIpUdpProtocolPortNumberwell-known UDP Port number. Pre-assigned port
number for this protocol. Port used by the
server process as its contact port. It cannot
be BOOTP/DHCP port#s 67, 68.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.2.1.1 |
rcIpUdpProtocolNameUsed to indicate the name of the protocol
that is running on top of UDP protocol.
cannot change the name once created. This
should be set while creating the entry.rw DisplayString .1.3.6.1.4.1.2272.1.8.13.2.1.2 |
rcIpUdpProtocolRowStatusRowstatus of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.13.2.1.3 |
rcIpUdpPortFwdTableSizeUsed to indicate the number of entries in the
rcIpUdpPortFwdTable.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.3 |
rcIpUdpPortFwdTableUdp forward entry table. SEQUENCE OF RcIpUdpPortFwdEntry .1.3.6.1.4.1.2272.1.8.13.4 |
rcIpUdpPortFwdEntryAn entry is configured to specify forwarding policy
parameters. RcIpUdpPortFwdEntry .1.3.6.1.4.1.2272.1.8.13.4.1 |
rcIpUdpPortFwdDestPortThe well-known port number defined for UDP/TCP
depending on the value of IpProtoType field in this
entry. This port number has to be defined in the
rcIpUdpProtoTable. In order to select this policy the
destination port number has to match the DestPort
value.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.4.1.1 |
rcIpUdpPortFwdDestAddrDestination IP address. The IP addres to which the
UDP/TCP broadcast should be forwarded. This IP address
can be any IP server address or subnet broadcast
address. If the IP address is one of the routable
interface's address on the router, the frame will be
rebroadcast out as a limited broadcast. If the Ip
address is that of a server then the received
broadcast packet will be sent as a unicast packet to
this address.ro IpAddress .1.3.6.1.4.1.2272.1.8.13.4.1.2 |
rcIpUdpPortFwdIdIdentifier of this entry. Used internally to identify
this entry.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.4.1.3 |
rcIpUdpPortFwdFwdListIdListSizeUsed to indicate the number of id(s) in the
rcIpUdpPortFwdListId variable.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.4.1.4 |
rcIpUdpPortFwdFwdListIdListUsed to indicate zero or more rcIpUdpPortFwdListEntry(s)
that are referring to this entry. Each list-id identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.ro IdList .1.3.6.1.4.1.2272.1.8.13.4.1.5 |
rcIpUdpPortFwdNumFwdPacketsThe total number of UDP/TCP broadcast packets forwarded
using this policy.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.4.1.6 |
rcIpUdpPortFwdNumDropPacketsTtlExpiredThe total number of UDP/TCP broadcast packets dropped
because the TTL has expired.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.4.1.7 |
rcIpUdpPortFwdNumDropPacketsDestUnreachThe total number of UDP/TCP broadcast packets dropped
because the rcIpUdpPortFwdDestAddr specified in
this policy was unreachable.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.4.1.8 |
rcIpUdpPortFwdRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.13.4.1.9 |
rcIpUdpPortFwdListTableSizeUsed to indicate the number of entries in the
rcIpUdpPortFwdListTable.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.5 |
rcIpUdpPortFwdListTableA table used to group rcIpUdpPortFwdEntry(s)
into a list. SEQUENCE OF RcIpUdpPortFwdListEntry .1.3.6.1.4.1.2272.1.8.13.6 |
rcIpUdpPortFwdListEntryRoute entry attributes. RcIpUdpPortFwdListEntry .1.3.6.1.4.1.2272.1.8.13.6.1 |
rcIpUdpPortFwdListIdA value that uniquely identifies this list of
rcIpUdpPortFwdListEntry.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.6.1.1 |
rcIpUdpPortFwdListNameAn administratively-assigned name for this list.rw DisplayString .1.3.6.1.4.1.2272.1.8.13.6.1.3 |
rcIpUdpPortFwdListFwdIdListSizeUsed to indicate the number of rcIpUdpPortFwdNetEntry
id(s) in the rcIpUdpPortFwdListIdList variable.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.6.1.4 |
rcIpUdpPortFwdListFwdIdListUsed to indicate zero or more UdpPortFwd entries
that are associated to this list. Each entry identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.rw OCTET STRING .1.3.6.1.4.1.2272.1.8.13.6.1.5 |
rcIpUdpPortFwdListRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.13.6.1.6 |
rcIpUdpConfBroadcastIntfTableSizeUsed to indicate the number of entries in the
rcIpUdpBroadcastIntfTable.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.7 |
rcIpUdpConfBroadcastIntfTableIP broadcast forward configuration table SEQUENCE OF RcIpUdpConfBroadcastIntfEntry .1.3.6.1.4.1.2272.1.8.13.8 |
rcIpUdpConfBroadcastIntfEntryUsed to configure UDP broadcast forward on a
particular interface. RcIpUdpConfBroadcastIntfEntry .1.3.6.1.4.1.2272.1.8.13.8.1 |
rcIpUdpConfBroadcastIntfLocalIfAddrThe ip address of the local interface that is
partipating in the forwarding UDP broadcast packets.ro IpAddress .1.3.6.1.4.1.2272.1.8.13.8.1.1 |
rcIpUdpConfBroadcastIntfUdpPortFwdListIdUsed to indicate the number UDP ports that this
interface is configured to forward.
A value of '0' indicates that this interface will not
forward any UDP broadcast packets. This is a required
field to create an entry.rw INTEGER .1.3.6.1.4.1.2272.1.8.13.8.1.2 |
rcIpUdpConfBroadcastIntfMaxTtlUsed to indicate the maximum number of hops an
IP broadcast packet can take from the source
device to the destination device.rw INTEGER .1.3.6.1.4.1.2272.1.8.13.8.1.3 |
rcIpUdpConfBroadcastIntfNumRxPktsThe total number of UDP/TCP broadcast packets
received by this local interface.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.4 |
rcIpUdpConfBroadcastIntfNumFwdPktsThe total number of UDP/TCP broadcast packets
forwarded.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.5 |
rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpiredThe total number of UDP/TCP broadcast packets
dropped because the TTL has expired.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.6 |
rcIpUdpConfBroadcastIntfNumDropPktsDestUnreachThe total number of UDP broadcast packets
dropped because the destination was unreachable.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.7 |
rcIpUdpConfBroadcastIntfNumDropPktsUnknownPortThe total number of UDP/TCP broadcast packets
dropped because the destination port/protocol
specified has no matching forwarding policy.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.8 |
rcIpUdpConfBroadcastIntfRowStatusEntry row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.13.8.1.9 |
rcIpUdpConfBroadcastIntfBroadCastMaskThe subnet mask of the local interface that is
used for broadcasting the UDP broadcast packets.rw IpAddress .1.3.6.1.4.1.2272.1.8.13.8.1.10 |
More MIBs from Rapidcity
Browse all RapidcityMIBs →RAPID-CITY
The RAPID-CITY MIB module facilitates SNMP-based monitoring and management of Accelar product family hardware, specifically tracking performance metrics such as throughput, connection states, and resource utilization for traffic acceleration appliances.
6502 objects→
RAPID-CITY-VSP
The RAPID-CITY-VSP MIB provides enterprise-level monitoring and management capabilities for the Accelar product family, enabling the collection of performance metrics, interface statistics, and system health data for Accelar network appliances. This module facilitates the tracking of device availability, traffic throughput, and operational states specific to Accelar's hardware and software implementations.
5404 objects→
RC-CFM-MIB
The RC-CFM-MIB module enables monitoring of Ethernet Connectivity Fault Management (CFM) state variables, including Maintenance Domain, Maintenance Association, and Maintenance Endpoint operational statuses, to detect and isolate Layer 2 network faults. It provides specific counters and gauges for CFM message transmission, reception, and error conditions to facilitate rapid diagnosis of link integrity and service continuity issues.
572 objects→
SWL2MGMT-MIB
SNMP MIB module
286 objects→
RC-IP-POLICY-MIB
The RC-IP-POLICY-MIB module provides SNMP access to configure and monitor IP traffic filtering rules, policy routing decisions, and associated session statistics on Accelar network appliances. It enables administrators to track policy hit counts, match conditions, and enforcement states for granular control over packet forwarding and security policies.
220 objects→
RC-2K-MIB
SNMP MIB module
218 objects→