RC-IP-ROUTING-MIB
Enterprise MIB for the Accelar product family.
Main OID:
rcIpRoutingMib.1.3.6.1.4.1.2272.1.8.4.0
52
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
rcIpRoutingMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.8.4.0 |
rcIpRoutingRedistributeRipToOspf OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.4.1 |
rcIpRoutingRedistributeRipToOspfEnableUsed to indicate whether or not to Redistribute
RIP routes to OSPF.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.1.1 |
rcIpRoutingRedistributeRipToOspfExplicitMetricValue of metric that is used to translate the
RIP route to OSPF.rwobsolete INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.4.1.2 |
rcIpRoutingRedistributeRipToOspfUseExplicitMetricUsed to indicate whether or not to use the user
specified default metric for redistributing
RIP routes to OSPF.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.1.3 |
rcIpRoutingRedistributeRipToOspfExternalMetricTypeUsed to configure the metric type of the
distributed routes to OSPF domain.
type1 means the metric is comparable directly
to the link state metric
(cost = internal cost + external cost).
type2 means the metric is considered larger
than any link state metric (cost = external
cost).rwobsolete Enumeration .1.3.6.1.4.1.2272.1.8.4.1.4 |
rcIpRoutingRedistributeOspfToRip OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.4.2 |
rcIpRoutingRedistributeOspfToRipEnableUsed to indicate whether or not to redistribute
OSPF routes to RIP.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.2.1 |
rcIpRoutingRedistributeOspfToRipExplicitMetricValue of metric that is used to translate the
OSPF route to RIP.rwobsolete INTEGER .1.3.6.1.4.1.2272.1.8.4.2.2 |
rcIpRoutingRedistributeOspfToRipUseExplicitMetricUsed to indicate whether or not to use the user
specified default metric for redistributing
OSPF routes to RIP.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.2.3 |
rcIpRoutingRedistributeDirectToOspf OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.4.3 |
rcIpRoutingRedistributeDirectToOspfEnableUsed to indicate whether directly connected
networks through non-ospf interfaces are
distributed to OSPF database or not. If
set to true all the static routes
will be added as external routes to OSPF
routing domain, provided the router is
configured as AS Border router. Also originates
asExtern link LSA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.3.1 |
rcIpRoutingRedistributeDirectToOspfMethodUsed to indicate whether or not to use the user
specified default metric for redistributing
direct routes to OSPF.rwobsolete Enumeration .1.3.6.1.4.1.2272.1.8.4.3.2 |
rcIpRoutingRedistributeDirectToOspfExplicitMetricValue of metric that is used to translate the
routes to directly connected networks to OSPF.rwobsolete INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.4.3.3 |
rcIpRoutingRedistributeDirectToOspfExternalMetricTypeUsed to configure the metric type of the
distributed routes to OSPF domain.
type1 means the metric is comparable directly
to the link state metric
(cost = internal cost + external cost).
type2 means the metric is considered larger
than any link state metric (cost = external
cost).rwobsolete Enumeration .1.3.6.1.4.1.2272.1.8.4.3.4 |
rcIpRoutingRedistributeStaticToOspf OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.4.4 |
rcIpRoutingRedistributeStaticToOspfEnableUsed to indicate whether static routes (that
are configured locally through management
protocol) are distributed to OSPF database
or not. If set to true all the static routes
will be added as external routes to OSPF
routing domain, provided the router is
configured as AS Border router. Also originates
asExtern link LSA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.4.1 |
rcIpRoutingRedistributeStaticToOspfExplicitMetricValue of metric that is used to translate the
static routes to OSPF.rwobsolete INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.4.4.2 |
rcIpRoutingRedistributeStaticToOspfUseExplicitMetricUsed to indicate whether or not to use the user
specified default metric for redistributing
static routes to OSPF.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.4.3 |
rcIpRoutingRedistributeStaticToOspfExternalMetricTypeUsed to configure the metric type of the
distributed routes to OSPF domain.
type1 means the metric is comparable directly
to the link state metric
(cost = internal cost + external cost).
type2 means the metric is considered larger
than any link state metric (cost = external
cost).rwobsolete Enumeration .1.3.6.1.4.1.2272.1.8.4.4.4 |
rcIpRoutingRedistributeStaticToOspfAdvertDefRteUsed to indicate whether default route (that
are configured locally through management
protocol) should be distributed to OSPF database
or not. If set to true then the default route will
be added as external route to OSPF routing domain,
provided the router is configured as AS Border router.
Also originates asExtern link LSA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.4.5 |
rcIpRoutingRedistributeDirectToRip OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.4.5 |
rcIpRoutingRedistributeDirectToRipEnableUsed to indicate whether directly connected
networks through non-rip interfaces are
distributed to RIP or not.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.5.1 |
rcIpRoutingRedistributeStaticToRip OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.4.6 |
rcIpRoutingRedistributeStaticToRipEnableUsed to indicate whether static routes (that
are configured locally through management
protocol) are distributed to RIP database
or not. If set to true all the static routes
will be added as external routes to RIP
routing domain.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.4.6.1 |
rcIpRouteTableThis entity's IP Routing table. SEQUENCE OF RcIpRouteEntry .1.3.6.1.4.1.2272.1.8.7 |
rcIpRouteEntryA route to a particular destination. RcIpRouteEntry .1.3.6.1.4.1.2272.1.8.7.1 |
rcIpRouteDestThe destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use.ro IpAddress .1.3.6.1.4.1.2272.1.8.7.1.1 |
rcIpRouteMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the rcIpRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value of the rcIpRouteMask by
determining whether the value of the correspondent
rcIpRouteDest field belong to a class-A, B, or C
network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the rcIpRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism.ro IpAddress .1.3.6.1.4.1.2272.1.8.7.1.2 |
rcIpRouteNextHopThe IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface).rw IpAddress .1.3.6.1.4.1.2272.1.8.7.1.3 |
rcIpRouteMetricThe primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
rcIpRouteProto value. If this metric is not used,
its value should be set to -1.rw Integer32 .1.3.6.1.4.1.2272.1.8.7.1.4 |
rcIpRouteIfIndexThe index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.8.7.1.5 |
rcIpRouteTypeThe type of route.ro Enumeration .1.3.6.1.4.1.2272.1.8.7.1.6 |
rcIpRouteProtoThe routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols.ro Enumeration .1.3.6.1.4.1.2272.1.8.7.1.7 |
rcIpRouteAgeThe number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned.ro Integer32 .1.3.6.1.4.1.2272.1.8.7.1.8 |
rcIpRouteRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.7.1.9 |
rcIpRoutePrefro INTEGER .1.3.6.1.4.1.2272.1.8.7.1.10 |
rcIpRouteAltSequenceAlternative Route Sequence. 0 denotes Best Route.ro Integer32 .1.3.6.1.4.1.2272.1.8.7.1.11 |
rcIpRoutePathTypeThe type of route. It is a combination of
direct, indirect, best, alternative and ECMP path.ro Enumeration .1.3.6.1.4.1.2272.1.8.7.1.12 |
rcIpStaticRouteTableSizesize of Ip Static Route Table.ro Integer32 .1.3.6.1.4.1.2272.1.8.15.1 |
rcIpStaticRouteTableThis table is used to add static IP routes to
the device. Routes added into this table will
automatically show-up in the 'rcIpRouteTable'
when the device is actively using the route
to forward IP traffic. SEQUENCE OF RcIpStaticRouteEntry .1.3.6.1.4.1.2272.1.8.15.2 |
rcIpStaticRouteEntryA static route to a particular destination. RcIpStaticRouteEntry .1.3.6.1.4.1.2272.1.8.15.2.1 |
rcIpStaticRouteDestThe destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use.ro IpAddress .1.3.6.1.4.1.2272.1.8.15.2.1.1 |
rcIpStaticRouteMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the rcIpRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value of the rcIpRouteMask by
determining whether the value of the correspondent
rcIpRouteDest field belong to a class-A, B, or C
network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the rcIpRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism.ro IpAddress .1.3.6.1.4.1.2272.1.8.15.2.1.2 |
rcIpStaticRouteNextHopThe IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface).ro IpAddress .1.3.6.1.4.1.2272.1.8.15.2.1.3 |
rcIpStaticRouteMetricThe primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
rcIpRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.15.2.1.4 |
rcIpStaticRouteIfIndexThe index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.8.15.2.1.5 |
rcIpStaticRoutePreferenceUsed to indicate the route preference of this
entry. If there are more than one route that can
be used to forward IP traffic, the route that has
a highest preference will be used instead of a
lower preference one. The higher the number, the higher the preference.rw INTEGER .1.3.6.1.4.1.2272.1.8.15.2.1.6 |
rcIpStaticRouteEnableUsed to enable/disable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.15.2.1.7 |
rcIpStaticRouteStatusUsed to indicate the current status of
this entry.ro Enumeration .1.3.6.1.4.1.2272.1.8.15.2.1.8 |
rcIpStaticRouteRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.15.2.1.9 |
rcIpStaticRouteLocalNextHopUsed to enable/disable this entry. True indicate that the
static route becomes active only if switch has a local route
to the network. False indicates that the static route becomes
active if switch has a local route or dynamic route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.15.2.1.10 |
More MIBs from Rapidcity
Browse all RapidcityMIBs →RAPID-CITY
The RAPID-CITY MIB module facilitates SNMP-based monitoring and management of Accelar product family hardware, specifically tracking performance metrics such as throughput, connection states, and resource utilization for traffic acceleration appliances.
6502 objects→
RAPID-CITY-VSP
The RAPID-CITY-VSP MIB provides enterprise-level monitoring and management capabilities for the Accelar product family, enabling the collection of performance metrics, interface statistics, and system health data for Accelar network appliances. This module facilitates the tracking of device availability, traffic throughput, and operational states specific to Accelar's hardware and software implementations.
5404 objects→
RC-CFM-MIB
The RC-CFM-MIB module enables monitoring of Ethernet Connectivity Fault Management (CFM) state variables, including Maintenance Domain, Maintenance Association, and Maintenance Endpoint operational statuses, to detect and isolate Layer 2 network faults. It provides specific counters and gauges for CFM message transmission, reception, and error conditions to facilitate rapid diagnosis of link integrity and service continuity issues.
572 objects→
SWL2MGMT-MIB
SNMP MIB module
286 objects→
RC-IP-POLICY-MIB
The RC-IP-POLICY-MIB module provides SNMP access to configure and monitor IP traffic filtering rules, policy routing decisions, and associated session statistics on Accelar network appliances. It enables administrators to track policy hit counts, match conditions, and enforcement states for granular control over packet forwarding and security policies.
220 objects→
RC-2K-MIB
SNMP MIB module
218 objects→