RADLAN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for RADLAN-MIB.
651
Objects
Active
Status
11
Dependencies
Imported Objects
Objects
651 total| Object Name |
|---|
rnd OBJECT IDENTIFIER .1.3.6.1.4.1.89 |
RFC1155-SMI Unknown .1.3.6.1.4.1.89 |
rndNotificationsAll the rnd notifications will reside under this branch
as specified in
RFC2578 'Structure of Management Information Version 2 (SMIv2)' 8.5 OBJECT IDENTIFIER .1.3.6.1.4.1.89.0 |
rxOverflowHWFaultAn RX buffer overflow has occurred in one of the LAN or link
interfaces. The bound variable rndErrorDesc provides the
interface number. TRAP-TYPE .1.3.6.1.4.1.89.0.3 |
txOverflowHWFaultInterport queue overflow has occurred in one of the LAN or link interfaces.
The bound variable rndErrorDesc provides the interface number. TRAP-TYPE .1.3.6.1.4.1.89.0.4 |
routeTableOverflowAn overflow condition has occurred in the Routing Table. The Routing
Table is used for IP routing algorithm (RIP). TRAP-TYPE .1.3.6.1.4.1.89.0.5 |
resetRequiredThis trap indicates that in order to perform the last SET request, a reset operation
of the router/bridge is required. This occurs when the layer 2 routing algorithm is
changed between SPF and Spanning Tree. The reset can be performed manually or
using the variable rndAction. TRAP-TYPE .1.3.6.1.4.1.89.0.10 |
endTftpThis trap indicates that in the device finished a TFTP
transaction with the management station.
variable rndErrorDesc and rndErrorSeverity provides the actual message
text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.12 |
abortTftpThis trap indicates that in the device aborted a TFTP session with
the management station. Variable rndErrorDesc and rndErrorSeverity
provides the actual message text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.13 |
startTftpInformational trap indicating that the device has intiated a
TFTP session. rndErrorDesc will contain the file type in
question TRAP-TYPE .1.3.6.1.4.1.89.0.14 |
faultBackUpAutomantic switchover to backup link because of main link fault. TRAP-TYPE .1.3.6.1.4.1.89.0.23 |
mainLinkUpCommunication returened to main link. TRAP-TYPE .1.3.6.1.4.1.89.0.24 |
ipxRipTblOverflowThis trap indicates that in an OpenGate IPX RIP table overflow.
The bound variable rndErrorDesc, rndErrorSeverity
provides the actual message text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.36 |
ipxSapTblOverflowThis trap indicates that in an OpenGate IPX SAP table overflow.
The bound variable rndErrorDesc, rndErrorSeverity
provides the actual message text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.37 |
facsAccessVoilationThis trap indicates that message that fits FACS statenebt with
operation blockAndReport was forward to the interface. The bound
variable rndErrorDesc, rndErrorSeverity(== info ) and
interface Number. TRAP-TYPE .1.3.6.1.4.1.89.0.49 |
autoConfigurationCompletedThis trap indicates that auto comfiguration completetd succssefully.
The bound variable rndErrorDesc, rndErrorSeverity(== info ) TRAP-TYPE .1.3.6.1.4.1.89.0.50 |
forwardingTabOverflowThis trap indicates that an overflow condition has occurred in the
layer II Forward Table.
The bound variable rndErrorDesc, rndErrorSeverity(== warning ) TRAP-TYPE .1.3.6.1.4.1.89.0.51 |
framRelaySwitchConnectionUpThis trap indicates that a connection establish between the Frame
relay Switch and the WanGate.
The bound variable rndErrorDesc, rndErrorSeverity(== warning ) TRAP-TYPE .1.3.6.1.4.1.89.0.53 |
framRelaySwitchConnectionDownThis trap indicates that a connection between the Frame Relay Switch
and the WanGate failed.
The bound variable rndErrorDesc, rndErrorSeverity(== warning ) TRAP-TYPE .1.3.6.1.4.1.89.0.54 |
errorsDuringInitThis trap indicates that the an error occured during initialization
The bound variable rndErrorDesc, rndErrorSeverity(== error ) TRAP-TYPE .1.3.6.1.4.1.89.0.61 |
vlanDynPortAdded TRAP-TYPE .1.3.6.1.4.1.89.0.66 |
vlanDynPortRemoved TRAP-TYPE .1.3.6.1.4.1.89.0.67 |
rsSDclientsTableOverflowThis warning is generated when an overflow occurs in the clients table. TRAP-TYPE .1.3.6.1.4.1.89.0.68 |
rsSDinactiveServerThis warning is generated when a server does not respond to the dispatchers polling
and is thought to be inactive. TRAP-TYPE .1.3.6.1.4.1.89.0.69 |
rsIpZhrConnectionsTableOverflowThe Zero Hop Routing connections Table has been overflown. TRAP-TYPE .1.3.6.1.4.1.89.0.70 |
rsIpZhrReqStaticConnNotAcceptedThe requested static connection was not accepted because there is
no available IP virtual address to allocate to it. TRAP-TYPE .1.3.6.1.4.1.89.0.71 |
rsIpZhrVirtualIpAsSourceThe virtual IP address appeared as a source IP.
All the connections using it will be deleted and
it will not be further allocated to new connections. TRAP-TYPE .1.3.6.1.4.1.89.0.72 |
rsIpZhrNotAllocVirtualIpThe source IP address sent an ARP specifying a virtual IP
which was not allocated for this source.
This virtual IP will not be allocated to connections of this
specific source IP. TRAP-TYPE .1.3.6.1.4.1.89.0.73 |
rsSnmpSetRequestInSpecialCfgStateAn incoming SNMP SET request was rejected because no such
requests (except action requests) are accepted after start of
new configuration reception or during sending the current
configuration to an NMS. TRAP-TYPE .1.3.6.1.4.1.89.0.74 |
rsPingCompletionA rsPingCompleted trap is sent at the completion
of a sequence of pings if such a trap was requested
when the sequence was initiated. The trap severity is info.
The trap text will specify the following information:
rsPingCompletionStatus, rsPingSentPackets, rsPingReceivedPackets
In addition to the above listed objects (which are always present),
the message will also specify the following quantities:
if any responses were received:
rsPingMinReturnTime
rsPingAvgReturnTime
rsPingMaxReturnTime TRAP-TYPE .1.3.6.1.4.1.89.0.136 |
pppSecurityViolationThis trap indicates that a PPP link got an unrecognized secret.
The bound variables rndErrorDesc,
rndErrorSeverity(== warning ), interface Number. and pppSecurityIdentity TRAP-TYPE .1.3.6.1.4.1.89.0.137 |
frDLCIStatudChange TRAP-TYPE .1.3.6.1.4.1.89.0.138 |
papFailedCommunication TRAP-TYPE .1.3.6.1.4.1.89.0.139 |
chapFailedCommunication TRAP-TYPE .1.3.6.1.4.1.89.0.140 |
rsWSDRedundancySwitchWhenever main server fails and backup takes over or server comes
up after failure a trap of this type is issued. TRAP-TYPE .1.3.6.1.4.1.89.0.141 |
rsDhcpAllocationFailureDHCP failed to allocate an IP address to a requesting host
because of memory shortage or inadequate configuration of
available IP addresses. TRAP-TYPE .1.3.6.1.4.1.89.0.142 |
rlIpFftStnOverflowThe IP SFFT overflow. TRAP-TYPE .1.3.6.1.4.1.89.0.145 |
rlIpFftSubOverflowThe IP NFFT overflow. TRAP-TYPE .1.3.6.1.4.1.89.0.146 |
rlIpxFftStnOverflowThe IPX SFFT overflow. TRAP-TYPE .1.3.6.1.4.1.89.0.147 |
rlIpxFftSubOverflowThe IPX NFFT overflow. TRAP-TYPE .1.3.6.1.4.1.89.0.148 |
rlIpmFftOverflowThe IPM FFT overflow. TRAP-TYPE .1.3.6.1.4.1.89.0.149 |
rlPhysicalDescriptionChangedIndicates that the physical decription of the device has
changed TRAP-TYPE .1.3.6.1.4.1.89.0.150 |
rldot1dStpPortStateForwardingThe trap is sent by a bridge when any of its configured ports
transitions from the Learning state to the Forwarding state. TRAP-TYPE .1.3.6.1.4.1.89.0.151 |
rldot1dStpPortStateNotForwardingThe trap is sent by a bridge when any of its configured ports
transitions from the Forwarding state to the Blocking state. TRAP-TYPE .1.3.6.1.4.1.89.0.152 |
rlPolicyDropPacketTrapIndicates that the packet drop due to the policy TRAP-TYPE .1.3.6.1.4.1.89.0.153 |
rlPolicyForwardPacketTrapIndicates that the packet has forward based on policy TRAP-TYPE .1.3.6.1.4.1.89.0.154 |
rlIgmpProxyTableOverflowAn IGMP PROXY Table overflow. TRAP-TYPE .1.3.6.1.4.1.89.0.156 |
rlIgmpV1MsgReceivedAn IGMP Message of v1 received on ifIndex. TRAP-TYPE .1.3.6.1.4.1.89.0.157 |
rlVrrpEntriesDeletedOne or more VRRP entries deleted due to IP interface deletion or transition. TRAP-TYPE .1.3.6.1.4.1.89.0.158 |
rlHotSwapTrapHot swap trap. TRAP-TYPE .1.3.6.1.4.1.89.0.159 |
rlTrunkPortAddedTrapInformational trap indicating that a port is added to a trunk TRAP-TYPE .1.3.6.1.4.1.89.0.160 |
rlTrunkPortRemovedTrapThis warning is generated when a port removed from a trunk. TRAP-TYPE .1.3.6.1.4.1.89.0.161 |
rlTrunkPortNotCapableTrapInformational trap indicating that a port can not be added to
a trunk because of device limitations or diffrent swIfType. TRAP-TYPE .1.3.6.1.4.1.89.0.162 |
rlLockPortTrapInformational trap indicating that a locked port receive
a frame with new source Mac Address. TRAP-TYPE .1.3.6.1.4.1.89.0.170 |
vlanDynVlanAddedadd gvrp dynamic vlan TRAP-TYPE .1.3.6.1.4.1.89.0.171 |
vlanDynVlanRemovedremove gvrp dynamic vlan TRAP-TYPE .1.3.6.1.4.1.89.0.172 |
vlanDynamicToStaticvlan status was changed from dynamic to static TRAP-TYPE .1.3.6.1.4.1.89.0.173 |
vlanStaticToDynamicvlan status was changed from static to dynamic TRAP-TYPE .1.3.6.1.4.1.89.0.174 |
dstrSysLogMaster receive trap from slave , and forward it as trap TRAP-TYPE .1.3.6.1.4.1.89.0.175 |
rlEnvMonFanStateChangeTrap indicating the fan state.
rndErrorSeverity will be:
0 for fan state nomal, notPresent
1 for fan state warning, notFunctioning
2 for fan state critical
3 for fan state fatal
The error text will specify the fan index, fan description and the exact fan state TRAP-TYPE .1.3.6.1.4.1.89.0.176 |
rlEnvMonPowerSupplyStateChangeTrap indicating the power supply state.
rndErrorSeverity will be:
0 for power supply state nomal, notPresent
1 for power supply state warning, notFunctioning
2 for power supply state critical
3 for power supply state fatal
The error text will specify the power supply index, power supply description and the exact power supply state TRAP-TYPE .1.3.6.1.4.1.89.0.177 |
rlStackStateChangeTrap indicating the stack connection state
0 for stack state connected,
1 for stack state disconnected TRAP-TYPE .1.3.6.1.4.1.89.0.178 |
rlEnvMonTemperatureRisingAlarmTrap indicating that the temperature in the device has exceeded the
device specific safe temperature threshold. TRAP-TYPE .1.3.6.1.4.1.89.0.179 |
rlBrgMacAddFailedTrapInformational trap indicating that adding dynamic mac/s
failed due to full hash chain. TRAP-TYPE .1.3.6.1.4.1.89.0.183 |
rldot1xPortStatusAuthorizedTrapInformational trap indicating that port 802.1x status is authorized. TRAP-TYPE .1.3.6.1.4.1.89.0.184 |
rldot1xPortStatusUnauthorizedTrapWarning trap is indicating that port 802.1x status is unAuthorized. TRAP-TYPE .1.3.6.1.4.1.89.0.185 |
swIfTablePortLockWarning trap is indicating port lock hase began. TRAP-TYPE .1.3.6.1.4.1.89.0.192 |
swIfTablePortUnLockWarning trap is indicating port lock has ended. TRAP-TYPE .1.3.6.1.4.1.89.0.193 |
rlAAAUserLockedWarning trap indicating that the user was locked after
number of consecutives unsuccessful login attempts. TRAP-TYPE .1.3.6.1.4.1.89.0.194 |
bpduGuardPortSuspendedWarning trap indicating - Port was suspended because there was BPDU Guard violation. TRAP-TYPE .1.3.6.1.4.1.89.0.202 |
rldot1xSupplicantMacAuthorizedTrapInformational trap indicating that MAC authentication supplicant
is authenticated and is allowed to access the network. TRAP-TYPE .1.3.6.1.4.1.89.0.203 |
rldot1xSupplicantMacUnauthorizedTrapWarning trap is indicating that Radius server rejects
MAC authentication supplicant. TRAP-TYPE .1.3.6.1.4.1.89.0.204 |
stpLoopbackDetectionWarning trap indicating - A loopback was detected on port. TRAP-TYPE .1.3.6.1.4.1.89.0.205 |
stpLoopbackDetectionResolvedWarning trap indicating - A loopback detection resolved on port. TRAP-TYPE .1.3.6.1.4.1.89.0.206 |
rndMng OBJECT IDENTIFIER .1.3.6.1.4.1.89.1 |
rndDeviceParams OBJECT IDENTIFIER .1.3.6.1.4.1.89.2 |
rndBridgeTypeIdentification of the RND bridge type.ro Enumeration .1.3.6.1.4.1.89.2.1 |
rndInactiveArpTimeOutThis variable defines the maximum time period that can pass
between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table.rw INTEGER .1.3.6.1.4.1.89.2.2 |
rndBridgeAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.3 |
rndErrorDescA textual description of the enterprise-specific trap sent
to the Network Management Station by the RND managed device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.3.1 |
rndErrorSeverityThe severity type of the enterprise-specific trap sent to the
Network Management Station by the RND managed device.ro Enumeration .1.3.6.1.4.1.89.2.3.2 |
rndBrgVersionThe bridge version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.4 |
rndBrgFeaturesA bit mask that defines the features supported by a particular configuration
of this network element:
__________________________________________
| Byte 1|Byte 2 |Byte 3 | ....|Byte 20 |
|87654321| | 87654321|
|________|_______________________________|
Byte1 :
bit1: TX Block mask
bit2: Source Routing Encapulation
bit3: SNA/SDLC
bit4: Frame Relay
bit5: SNMP
bit6: LAN Manager
bit7: High Performance
bit8: Translation
Byte2 :
bit1: DEC Router
bit2: IPX Router
bit3: IP Router
Byte3 :
bit1: Dial Up Backup
bit2: COD
bit3: FACS
bit4: Load Balance
bit5: Remote Configuration
bit6: RIP 2
bit7: OSPF
bit8: IPX RIP/SAP Filter
Byte4 :
bit1: BootP Server
bit2: BootP Client
bit3: Compression
bit4: V25.bis
bit5: ISDN
bit6: CODv2
bit7: NSPF
bit8: UDP Relay
Byte5
bit1:VirtualLAN
bit2:Static IP Multicast
bit3:IP Redundancy
bit4:CCM2
bit5:ISDN Bonding
bit6:Backup Link Selection
bit7:IP/IPX Forwarding
bit8:Improved COD
Byte6
bit1: Server Disptacher
bit2: ISDN_US
bit3: PPP
bit4: IP Rip Filter
bit5: Zero Hop Routing
bit6: ISDN Japan
bit7: PPP-Security
Byte7
bit1: With unmanaged Switch
bit2: 2 LANs
bit3: OSPF Ver 2.0
bit4: FACS Ver 2.0
bit5: Multiple WEB Farm
bit6: Backup Server
bit7: Check Connectivity
bit8: WSD multiplexing
Byte8
bit1: MRT3
bit2: WSD Redundancy
bit3: DHCP Server
bit4: WSD Connection Limit
bit5: WSD Distributed System
bit6: WSD Load Report
bit7: WSD super farm
bit8: RadWiz leased line
Byte9
bit1: PPP IP address negotiaton
bit2: DNS
bit3: Nat
bit4: WSD Static proximity
bit5: WSD Dynamic proximity
bit6: WSD Proxy
bit7: WSD Proximity client
bit8: MAC Load balancing
Byte10
bit1: Unnum Inf
bit2: Power Supply redundancy
bit3: MRT PPP Compression
bit4: ZHR Apolo
bit5: Copy port
bit6: UDP Relay 2.0
bit7: NVRAM
bit8: URL table
Byte11
bit1: URL super farm
bit2: NAT on LAN
bit3: Remote Con
bit4: AP5000
bit5: Session tracking
bit6: Mirroring
bit7: Alias IP
bit8: CSD Nat
Byte12
bit1: content check
bit2: mlb virtual ip
bit3: reserved RadLan
bit4: csd nat exception
bit5: statistics monitor
bit6: reserved-for-radwarero OCTET STRING -- SIZE 20 .1.3.6.1.4.1.89.2.5 |
rndBrgLicenseThis parameter is used for entering a s/w license number for a device.
A separate license number is supplied for each device.rw OCTET STRING -- SIZE 20 .1.3.6.1.4.1.89.2.6 |
rndIpHost OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.7 |
rndCommunityTableThe community table of the agent SEQUENCE OF RndCommunityEntry .1.3.6.1.4.1.89.2.7.2 |
rndCommunityEntryThe row definition for this table. RndCommunityEntry .1.3.6.1.4.1.89.2.7.2.1 |
rndCommunityMngStationAddrThe management station that will be allowed to
communicate with the agent IP addressrw IpAddress .1.3.6.1.4.1.89.2.7.2.1.1 |
rndCommunityStringThe community string with which the management
station will communicate with the agentrw DisplayString .1.3.6.1.4.1.89.2.7.2.1.2 |
rndCommunityAccessThe allowed access to this management stationrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.3 |
rndCommunityTrapsEnableShould the agent send traps to the management station,
and what version is requiredrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.4 |
rndCommunityStatusThe status of this entry. If the status is invalid the
community entry will be deletedrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.5 |
rndCommunityPortSecurityIf enabled the device will only receive SNMP messages from the port,
through which this NMS is reachable from the device.rw Enumeration .1.3.6.1.4.1.89.2.7.2.1.6 |
rndCommunityOwnerThe owner of this communityrw DisplayString .1.3.6.1.4.1.89.2.7.2.1.7 |
rndCommunityTrapDestPortThe transport protocol (usually UDP) port to which traps to the
management station represebted by this entry will be sent. The default
is the well-known IANA assigned port number for SNMP traps.
This object is relevant only if rndCommunityTrapsEnable has a value
different from trapsDisable.rw INTEGER .1.3.6.1.4.1.89.2.7.2.1.8 |
rlMridTableThe MRID related configurations table of the agent SEQUENCE OF RlMridEntry .1.3.6.1.4.1.89.2.7.3 |
rlMridEntryThe row definition for this table. RlMridEntry .1.3.6.1.4.1.89.2.7.3.1 |
rlMridConnectionThe router instance connecting the NMS who accessed the agent
through the community table entry corresponding to the keys of this entry.rw INTEGER .1.3.6.1.4.1.89.2.7.3.1.1 |
rlManagedMridThe router instance currently managed by the NMS who accessed the agent
through the community table entry corresponding to the keys of this entryrw INTEGER .1.3.6.1.4.1.89.2.7.3.1.2 |
rndIpHostManagement OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.7.4 |
rndIpHostManagementSupportedifindex manage supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.2.7.4.1 |
rndIpHostManagementIfIndexif supported manage , indicate ifindex, if 0 thaen disablerw INTEGER .1.3.6.1.4.1.89.2.7.4.2 |
rndManagedTimeThe time will be sent in the format hhmmssrw DisplayString .1.3.6.1.4.1.89.2.8 |
rndManagedDateThe date will be sent in the format ddmmyyrw DisplayString .1.3.6.1.4.1.89.2.9 |
rndBaseBootVersionDefines the boot version of the product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.10 |
genGroup OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.11 |
genGroupHWVersionDefines the HW version of the product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.11.1 |
genGroupConfigurationSymbolDefines the Configuration Symbol attached to any hardware module
manufactured by LANNET. One single character A..Z defines the CS
version.ro DisplayString .1.3.6.1.4.1.89.2.11.2 |
genGroupHWStatusThis attribute describes the status of the group hardware as detected
by the sensors software.ro Enumeration .1.3.6.1.4.1.89.2.11.3 |
rndBasePhysicalAddressThe Base physical (MAC) address of the device.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.2.12 |
rndSoftwareFile OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.13 |
rndActiveSoftwareFileTableThe (conceptual) table listing the active software file of the
requested unit. SEQUENCE OF RndActiveSoftwareFileEntry .1.3.6.1.4.1.89.2.13.1 |
rndActiveSoftwareFileEntryAn entry (conceptual row) in the rndActiveSoftwareFileTable. RndActiveSoftwareFileEntry .1.3.6.1.4.1.89.2.13.1.1 |
rndUnitNumberThe unit number (for stackable devices) or 1 for 'stand alone' device.rw INTEGER .1.3.6.1.4.1.89.2.13.1.1.1 |
rndActiveSoftwareFileIndicates the current active software file, image1 or image2.ro Enumeration .1.3.6.1.4.1.89.2.13.1.1.2 |
rndActiveSoftwareFileAfterResetIndicates the software file that will be active after reset (image1 or image2).
If an error occurred in the download process, resulting in the corruption
of the single software file, The value 'invalidImage' will be returned.
This value can not be set by the user.rw Enumeration .1.3.6.1.4.1.89.2.13.1.1.3 |
rndImageSizeMax number of sectors currently allocated for image(s).ro INTEGER .1.3.6.1.4.1.89.2.14 |
rndBackupConfigurationEnabledSpecifies whether the device supports backup-config parameters in lcli commands.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.2.15 |
rndImageInfo OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.16 |
rndImageInfoTableThe table contains information about images. SEQUENCE OF RndImageInfoEntry .1.3.6.1.4.1.89.2.16.1 |
rndImageInfoEntryAn entry in the rndImageInfoTable. RndImageInfoEntry .1.3.6.1.4.1.89.2.16.1.1 |
rndStackUnitNumberThe unit number (for stackable devices) or 1 for 'stand alone' device.rw INTEGER .1.3.6.1.4.1.89.2.16.1.1.1 |
rndImage1NameIndicates the file name of image-1 in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.2 |
rndImage2NameIndicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' textro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.3 |
rndImage1VersionIndicates the version of image-1 in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.4 |
rndImage2VersionIndicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' textro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.5 |
rndImage1DateIndicates the compilation date of image-1 in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.6 |
rndImage2DateIndicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' textro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.7 |
rndImage1TimeIndicates the compilation time of image-1 in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.8 |
rndImage2TimeIndicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' textro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.16.1.1.9 |
rndBootP OBJECT IDENTIFIER .1.3.6.1.4.1.89.24 |
rndBootPServerAddressThe IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if
this parameter is not equale to 0.0.0.0.rw IpAddress .1.3.6.1.4.1.89.24.1 |
rndBootPRelaySecThresholdBootP requests are relayed only if their SEC field is greater or
equal to the threshold value in order to allow local BootP Servers
to answer first.rw INTEGER .1.3.6.1.4.1.89.24.2 |
ipSpec OBJECT IDENTIFIER .1.3.6.1.4.1.89.26 |
rsTunning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29 |
rndApplications OBJECT IDENTIFIER .1.3.6.1.4.1.89.35 |
rsUDP OBJECT IDENTIFIER .1.3.6.1.4.1.89.42 |
swInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.89.43 |
rlIPmulticast OBJECT IDENTIFIER .1.3.6.1.4.1.89.46 |
rlFFT OBJECT IDENTIFIER .1.3.6.1.4.1.89.47 |
vlan OBJECT IDENTIFIER .1.3.6.1.4.1.89.48 |
rlRmonControl OBJECT IDENTIFIER .1.3.6.1.4.1.89.49 |
rlBrgMacSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.89.50 |
rlBrgMacSwVersionMIB's version, the current version is 2.ro INTEGER .1.3.6.1.4.1.89.50.1 |
rlBrgMacSwMaxTableNumberMaximum number of MAC Tables supported by the device.ro INTEGER .1.3.6.1.4.1.89.50.2 |
rlBrgMacSwDynamicTablesSpecifies whether the device supports port dynamic MAC tables.ro Enumeration .1.3.6.1.4.1.89.50.3 |
rlBrgMacSwOldEntryDeleteModeThe method used to delete old unused entries
refresh_flag:
The high level sets a flag when it adds or updates an entry,
the Switch clears the flag each time, when it learns the
station once more.
aging_flag:
The high level clears a flag when it adds or updates an entry,
the Switch sets the flag each time, when it learns the station
once more.
aging_time:
The high level defines a timeout, the Switch sends a message
to the high level each time when the station doesn't send
messages during interval between timeout and 2*timeout.
Boundaries:
The Switch doesn't support any mechanism, and the high level
uses two boundaries: red and yellow. When the number of entries
exceeds the red boundary, the high level deletes the oldest entries.ro Enumeration .1.3.6.1.4.1.89.50.5 |
rlBrgMacSwSpanningTreeSpecifies whether the device supports port the Spanning Tree Protocol.ro Enumeration .1.3.6.1.4.1.89.50.6 |
rlBrgMacSwKeyTypeSpecified the used MAC Address Table kye format:
macOnly:
One global MAC Address Table per device (leaky VLANs).
tagAndMac:
MAC Address Table per each VLAN (strick VLANs).ro Enumeration .1.3.6.1.4.1.89.50.7 |
rlBrgMacSwYellowBoundaryThe yellow boundary.rw INTEGER .1.3.6.1.4.1.89.50.8 |
rlBrgMacSwRedBoundaryThe yellow boundary.rw INTEGER .1.3.6.1.4.1.89.50.9 |
rlBrgMacSwTrapEnableThis variable indicates whether to create a SNMP trap
if adding dynamic mac failed due to full hash chain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.50.10 |
rlBrgMacSwOperTrapCountThis variable indicates the trap counter status
(i.e. number of received MAC addresses since the last trap
sent that haven't been inserted into the hash).
It is relevant only when trap is enabled.ro INTEGER .1.3.6.1.4.1.89.50.11 |
rlBrgMacSwAdminTrapFrequencyThis variable indicates the minimal frequency (in seconds)
of sending a trap.
It is relevant only when trap is enabled.rw INTEGER (1 .. 86400) -- UNITS "seconds" .1.3.6.1.4.1.89.50.12 |
rlExperience OBJECT IDENTIFIER .1.3.6.1.4.1.89.51 |
rlCli OBJECT IDENTIFIER .1.3.6.1.4.1.89.52 |
rlCliMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.52.1 |
rlCliPasswordCLI Passwordrw DisplayString .1.3.6.1.4.1.89.52.2 |
rlCliTimerCLI Timerrw INTEGER .1.3.6.1.4.1.89.52.3 |
rlCliFileEnableCLI File Enable/Disablero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.52.4 |
rlCliFileEnableAfterResetCLI File Enable/Disable After Resetrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.52.5 |
rlPhysicalDescription OBJECT IDENTIFIER .1.3.6.1.4.1.89.53 |
rlIfInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.89.54 |
rlMacMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.89.55 |
rlGalileo OBJECT IDENTIFIER .1.3.6.1.4.1.89.56 |
rlpBridgeMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.89.57 |
rldot1dPriority OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.1 |
rldot1dPriorityMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.57.1.1 |
rldot1dPriorityPortGroupTableA list of PortGroupNumber for each port. SEQUENCE OF Rldot1dPriorityPortGroupEntry .1.3.6.1.4.1.89.57.1.2 |
rldot1dPriorityPortGroupEntryAll ports belonging to a same group have
the same User Priority to Traffic Class mapping. Rldot1dPriorityPortGroupEntry .1.3.6.1.4.1.89.57.1.2.1 |
rldot1dPriorityPortGroupNumberA group, that port belongs to. All ports belonging
to a same group have the same User Priority to
Traffic Class mapping.ro INTEGER .1.3.6.1.4.1.89.57.1.2.1.1 |
rldot1dStp OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.2 |
rldot1dStpMibVersionMIB's version, the current version is 2.ro INTEGER .1.3.6.1.4.1.89.57.2.1 |
rldot1dStpTypeSpecifies whether the device supports Spanning Tree per device,
or per group.ro Enumeration .1.3.6.1.4.1.89.57.2.2 |
rldot1dStpEnableEnable / Disable spanning tree. When working in per vlan mode
enable / disable STP per all vlans.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.3 |
rldot1dStpPortMustBelongToVlanSpecifies whether a port must belong to a VLAN in order
to participate in the STP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.4 |
rldot1dStpExtendedPortNumberFormatSpecifies whether the STP uses the extended port fnumber format.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.5 |
rldot1dStpVlanTableA table that contains vlan-specific information
for the Spanning Tree Protocol. SEQUENCE OF Rldot1dStpVlanEntry .1.3.6.1.4.1.89.57.2.6 |
rldot1dStpVlanEntryA list of information maintained by every Vlan
about the Spanning Tree Protocol state for that
Vlan. Rldot1dStpVlanEntry .1.3.6.1.4.1.89.57.2.6.1 |
rldot1dStpVlanThe Vlan index.ro INTEGER .1.3.6.1.4.1.89.57.2.6.1.1 |
rldot1dStpVlanEnableSpecifies whether this vlan is STP enable or disablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.6.1.2 |
rldot1dStpTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.57.2.6.1.3 |
rldot1dStpTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter .1.3.6.1.4.1.89.57.2.6.1.4 |
rldot1dStpDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.89.57.2.6.1.5 |
rldot1dStpRootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.89.57.2.6.1.6 |
rldot1dStpRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.89.57.2.6.1.7 |
rldot1dStpMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.89.57.2.6.1.8 |
rldot1dStpHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.89.57.2.6.1.9 |
rldot1dStpHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.89.57.2.6.1.10 |
rldot1dStpForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.89.57.2.6.1.11 |
rldot1dStpVlanPortTableA table that contains pair <vlan, port> specific information
for the Spanning Tree Protocol. SEQUENCE OF Rldot1dStpVlanPortEntry .1.3.6.1.4.1.89.57.2.7 |
rldot1dStpVlanPortEntryA list of information maintained by every pair <vlan, port>
about the Spanning Tree Protocol state for that pair. Rldot1dStpVlanPortEntry .1.3.6.1.4.1.89.57.2.7.1 |
rldot1dStpVlanPortVlanThe Vlan number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.89.57.2.7.1.1 |
rldot1dStpVlanPortPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.89.57.2.7.1.2 |
rldot1dStpVlanPortPriorityThe value of the priority field which is
contained in the more significant 4 bits of the most
significant octet of the (2 octet long) Port ID.
The other octet of the Port ID is given by the value
of rldot1dStpVlanPort.rw INTEGER .1.3.6.1.4.1.89.57.2.7.1.3 |
rldot1dStpVlanPortStateThe port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning
it will place that port into the broken(6) state. For ports
which are disabled (see dot1dStpVlanPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.89.57.2.7.1.4 |
rldot1dStpVlanPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.89.57.2.7.1.5 |
rldot1dStpVlanPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.rw INTEGER .1.3.6.1.4.1.89.57.2.7.1.6 |
rldot1dStpVlanPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.89.57.2.7.1.7 |
rldot1dStpVlanPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.89.57.2.7.1.8 |
rldot1dStpVlanPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.89.57.2.7.1.9 |
rldot1dStpVlanPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.89.57.2.7.1.10 |
rldot1dStpVlanPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter .1.3.6.1.4.1.89.57.2.7.1.11 |
rldot1dStpTrapVariable OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.2.8 |
rldot1dStpTrapVrblifIndexThe ifIndex of port which STP status was changedro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.57.2.8.1 |
rldot1dStpTrapVrblVIDThe VID of VLAN to which the port belongs which STP status was changedro INTEGER .1.3.6.1.4.1.89.57.2.8.2 |
rldot1dStpTypeAfterResetNew mode of spaning tree supported by the device after the next reset.rw Enumeration .1.3.6.1.4.1.89.57.2.9 |
rldot1dStpMonitorTimeFactor of hello-time during which a port is monotored to determine if it is stable.rw INTEGER .1.3.6.1.4.1.89.57.2.10 |
rldot1dStpBpduCountThe number of bpdu that need to received for the link to be considered stable.rw INTEGER .1.3.6.1.4.1.89.57.2.11 |
rldot1dStpLastChangedThe last time any object in this table was changed
by SNMP or other local management means.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.57.2.12 |
rldot1dStpPortTableA table that contains extended pair port specific information. SEQUENCE OF Rldot1dStpPortEntry .1.3.6.1.4.1.89.57.2.13 |
rldot1dStpPortEntryA list of information maintained by every port
about the Spanning Tree Protocol state for that port. Rldot1dStpPortEntry .1.3.6.1.4.1.89.57.2.13.1 |
rldot1dStpPortPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.89.57.2.13.1.1 |
rldot1dStpPortDampEnableSpecified if dampening is enabled on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.13.1.2 |
rldot1dStpPortDampStableSpecified if the port is stable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.13.1.3 |
rldot1dStpPortFilterBpduSpecified if this port should filter bpdus when stp is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.13.1.4 |
rldot1dStpPortBpduSentSpecified the number of bpdu sent from this port.ro Counter-32 .1.3.6.1.4.1.89.57.2.13.1.5 |
rldot1dStpPortBpduReceivedSpecified the number of bpdu received in this port.ro Counter-32 .1.3.6.1.4.1.89.57.2.13.1.6 |
rldot1dStpPortRoleSpecified the role of this this port.ro Enumeration .1.3.6.1.4.1.89.57.2.13.1.7 |
rldot1dStpBpduTypeSpecified the type of BPDU transmitted by this port.ro Enumeration .1.3.6.1.4.1.89.57.2.13.1.8 |
rldot1dStpPortRestrictedRoleIf TRUE causes the Port not to be selected as Root Port for the CIST or
any MSTI, even if it has the best spanning tree priority vector.
Such a Port will be selected as an Alternate Port after the Root Port
has been selected.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.13.1.9 |
rldot1dStpPortAutoEdgePortIf TRUE causes the Port when become up, to enter the blocking state,
and if during 3 seconds it doesn't receive a BPDU, it will enter
the forwarding state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.13.1.10 |
rldot1dStpPortLoopbackSpecified loopback was detected on port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.13.1.11 |
rldot1dStpPortsEnableEnable / Disable spanning tree on ports by default .ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.14 |
rldot1dStpTaggedFloodingflooding can be done in tagged bpdu .ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.15 |
rldot1dStpPortBelongToVlanDefaultThe default value of rldot1dStpPortMustBelongToVlan .ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.16 |
rldot1dStpEnableByDefaultThe default value of rldot1dStpEnable .ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.17 |
rldot1dStpPortToDefaultTo order port/s to revert to default setings .rw INTEGER .1.3.6.1.4.1.89.57.2.18 |
rldot1dStpSupportedTypeThe type of stp supported by the device.ro Enumeration .1.3.6.1.4.1.89.57.2.19 |
rldot1dStpEdgeportSupportInStpIf EdgePort is supported in stpCompatible mode .ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.20 |
rldot1dStpFilterBpduSpecified if the device should filter BPDUs when STP is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.21 |
rldot1dStpFloodBpduMethodSpecified flooding method:
1 - classic - untagged to all stp disabled ports
2 - bridging -normal bridging.rw Enumeration .1.3.6.1.4.1.89.57.2.22 |
rldot1dStpSeparatedBridges OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.2.23 |
rldot1dStpSeparatedBridgesTableDefine if separated bridges feature is enabled for each interface. SEQUENCE OF Rldot1dStpSeparatedBridgesEntry .1.3.6.1.4.1.89.57.2.23.1 |
rldot1dStpSeparatedBridgesEntryDefines the contents of each line in the rlSeparatedBridgesTable table. Rldot1dStpSeparatedBridgesEntry .1.3.6.1.4.1.89.57.2.23.1.1 |
rldot1dStpSeparatedBridgesPortEnableThis variable indicates whether the separated bridge feature is enabled on a specified ifIndex.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.23.1.1.1 |
rldot1dStpSeparatedBridgesEnableEnable / Disable Separated Bridges Feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.23.2 |
rldot1dStpSeparatedBridgesAutoConfigEnable / Disable Separated Bridges Automatic Configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.23.3 |
rldot1dStpPortBpduGuardTableA table that contains for each port whether it is bpdu guard . SEQUENCE OF Rldot1dStpPortBpduGuardEntry .1.3.6.1.4.1.89.57.2.24 |
rldot1dStpPortBpduGuardEntryA list of information maintained by every port
whether it is bpdu guard. Rldot1dStpPortBpduGuardEntry .1.3.6.1.4.1.89.57.2.24.1 |
rldot1dStpPortBpduGuardEnableSpecified if bpdu guard is enabled on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.2.24.1.1 |
rldot1dExtBase OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.3 |
rldot1dExtBaseMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.57.3.1 |
rldot1dDeviceCapabilitiesIndicates the optional parts of private extension of
IEEE 802.1D and 802.1Q that are implemented by this
device and are manageable through this MIB.
Capabilities that are allowed on a per-port basis are
indicated in dot1dPortCapabilities.ro Bits .1.3.6.1.4.1.89.57.3.2 |
rldot1wRStp OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.4 |
rldot1wRStpVlanEdgePortTableA table that contains pair <vlan, port> specific information
for the Rapid Spanning Tree Protocol. SEQUENCE OF Rldot1wRStpVlanEdgePortEntry .1.3.6.1.4.1.89.57.4.1 |
rldot1wRStpVlanEdgePortEntryA list of information maintained by every pair <vlan, port>
about the RAPID Spanning Tree Protocol state for that pair. Rldot1wRStpVlanEdgePortEntry .1.3.6.1.4.1.89.57.4.1.1 |
rldot1wRStpVlanEdgePortVlanThe Vlan number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management information,
If STP per device then only one value of 1 is allowed.
If STP per a VLAN then all value of 1..4095 are allowed.ro INTEGER .1.3.6.1.4.1.89.57.4.1.1.1 |
rldot1wRStpVlanEdgePortPortThe port number of the port for which this entry
contains Spanning Tree Protocol management information.ro INTEGER .1.3.6.1.4.1.89.57.4.1.1.2 |
rldot1wRStpEdgePortStatusSpecifies whether this port is an Edge Port or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.4.1.1.3 |
rldot1wRStpForceVersionTableA table that contains <vlan> specific information
for the Rapid Spanning Tree Protocol. SEQUENCE OF Rldot1wRStpForceVersionEntry .1.3.6.1.4.1.89.57.4.2 |
rldot1wRStpForceVersionEntryA list of information maintained by every <vlan>
about the RAPID Spanning Tree Protocol state for that pair. Rldot1wRStpForceVersionEntry .1.3.6.1.4.1.89.57.4.2.1 |
rldot1wRStpForceVersionVlanThe Vlan number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management information,
If STP per device then only one value of 1 is allowed.
If STP per a VLAN then all value of 1..4095 are allowed.ro INTEGER .1.3.6.1.4.1.89.57.4.2.1.1 |
rldot1wRStpForceVersionStateSpecifies whether this Bridge uses the normal RSTP algorithm,
or STP Compatibility algorythm:
0 - STP Compatibility
2 - Normal RSTPrw INTEGER .1.3.6.1.4.1.89.57.4.2.1.2 |
rldot1pPriorityMap OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.5 |
rldot1pPriorityMapStateenable / disablerw Enumeration .1.3.6.1.4.1.89.57.5.1 |
rldot1pPriorityMapTableThis table hold information the priority maps SEQUENCE OF Rldot1pPriorityMapEntry .1.3.6.1.4.1.89.57.5.2 |
rldot1pPriorityMapEntryThe row definition for this table. Rldot1pPriorityMapEntry .1.3.6.1.4.1.89.57.5.2.1 |
rldot1pPriorityMapNameThe map namero DisplayString .1.3.6.1.4.1.89.57.5.2.1.1 |
rldot1pPriorityMapPriorityThe map holding the queuerw OCTET STRING .1.3.6.1.4.1.89.57.5.2.1.2 |
rldot1pPriorityMapPortthe port that the map, is applied on in configrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.57.5.2.1.3 |
rldot1pPriorityMapPortListthe ports that the map, is applied on in actualro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.57.5.2.1.4 |
rldot1pPriorityMapStatusThe status of the table entry. It's used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.57.5.2.1.5 |
rldot1sMstp OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.6 |
rldot1sMstpInstanceTableA table that contains Mstp instance specific information
for the Multiple Spanning Tree Protocol. SEQUENCE OF Rldot1sMstpInstanceEntry .1.3.6.1.4.1.89.57.6.1 |
rldot1sMstpInstanceEntryA list of information maintained by every instance
about the multiple Spanning Tree Protocol state for
that instance. Rldot1sMstpInstanceEntry .1.3.6.1.4.1.89.57.6.1.1 |
rldot1sMstpInstanceIdThe Instance index.ro INTEGER .1.3.6.1.4.1.89.57.6.1.1.1 |
rldot1sMstpInstanceEnableSpecifies whether this Instance is STP enable or disablero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.6.1.1.2 |
rldot1sMstpInstanceTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
Mstp Instance .ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.57.6.1.1.3 |
rldot1sMstpInstanceTopChangesThe total number of topology changes detected by
this Instance since the management entity was last
reset or initialized.ro Counter .1.3.6.1.4.1.89.57.6.1.1.4 |
rldot1sMstpInstanceDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Muliple Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.89.57.6.1.1.5 |
rldot1sMstpInstanceRootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.89.57.6.1.1.6 |
rldot1sMstpInstanceRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.89.57.6.1.1.7 |
rldot1sMstpInstanceMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.89.57.6.1.1.8 |
rldot1sMstpInstanceHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.89.57.6.1.1.9 |
rldot1sMstpInstanceHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.89.57.6.1.1.10 |
rldot1sMstpInstanceForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.89.57.6.1.1.11 |
rldot1sMstpInstancePriorityThe value of the write-able portion of the Bridge
ID, i.e., the first four bits of the first octet
of the (8 octet long) Bridge ID.The value is a product
of 4096. The next 12 bit are the msti id .
The other (last) 6 octets of the Bridge ID are given
by the value of dot1dBaseBridgeAddress.rw INTEGER .1.3.6.1.4.1.89.57.6.1.1.12 |
rldot1sMstpInstanceRemainingHopesThis count value determines the amount of hopes
the information transmited by this bridge on this
instance can travel.ro INTEGER .1.3.6.1.4.1.89.57.6.1.1.13 |
rldot1sMstpInstancePortTableA table that contains pair <msti, port> specific information
for the Spanning Tree Protocol. SEQUENCE OF Rldot1sMstpInstancePortEntry .1.3.6.1.4.1.89.57.6.2 |
rldot1sMstpInstancePortEntryA list of information maintained by every pair <msti, port>
about the Spanning Tree Protocol state for that pair. Rldot1sMstpInstancePortEntry .1.3.6.1.4.1.89.57.6.2.1 |
rldot1sMstpInstancePortMstiIdThe Vlan group number that the port belongs to, and for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.89.57.6.2.1.1 |
rldot1sMstpInstancePortPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.89.57.6.2.1.2 |
rldot1sMstpInstancePortPriorityThe value of the priority field which is
contained in the more significant 4 bits of the most
significant octet of the (2 octet long) Port ID.
The value is a product of 16.
The other octet of the Port ID is given by the value
of rldot1dStpVlanGroupPort.rw INTEGER .1.3.6.1.4.1.89.57.6.2.1.3 |
rldot1sMstpInstancePortStateThe port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning
it will place that port into the broken(6) state. For ports
which are disabled (see dot1dStpVlanPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.89.57.6.2.1.4 |
rldot1sMstpInstancePortEnableThe enabled/disabled status of the port.ro Enumeration .1.3.6.1.4.1.89.57.6.2.1.5 |
rldot1sMstpInstancePortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.ro INTEGER .1.3.6.1.4.1.89.57.6.2.1.6 |
rldot1sMstpInstancePortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.89.57.6.2.1.7 |
rldot1sMstpInstancePortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.89.57.6.2.1.8 |
rldot1sMstpInstancePortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.89.57.6.2.1.9 |
rldot1sMstpInstancePortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.89.57.6.2.1.10 |
rldot1sMstpInstancePortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter .1.3.6.1.4.1.89.57.6.2.1.11 |
rldot1sMStpInstancePortAdminPathCostThe administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object dot1dStpPortPathCost, which
returns the operational value of the path cost.rw INTEGER .1.3.6.1.4.1.89.57.6.2.1.12 |
rldot1sMStpInstancePortRoleSpecify the role of this this port.ro Enumeration .1.3.6.1.4.1.89.57.6.2.1.13 |
rldot1sMstpMaxHopesMax number of hopes that an MST BPDU will travel inside a region.rw INTEGER .1.3.6.1.4.1.89.57.6.3 |
rldot1sMstpConfigurationNameThe active configuration name as will be caried in MST BPDU's.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.89.57.6.4 |
rldot1sMstpRevisionLevelThe active revision level.ro INTEGER .1.3.6.1.4.1.89.57.6.5 |
rldot1sMstpVlanTableA table that contains information about the alocation of vlans to groups. SEQUENCE OF Rldot1sMstpVlanEntry .1.3.6.1.4.1.89.57.6.6 |
rldot1sMstpVlanEntryA list of information maintained by every vlan
about the group it belongs to. Rldot1sMstpVlanEntry .1.3.6.1.4.1.89.57.6.6.1 |
rldot1sMstpVlanThe vlan number of the vlan for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.89.57.6.6.1.1 |
rldot1sMstpGroupSpecifid the active group number this vlan belonges to.ro INTEGER .1.3.6.1.4.1.89.57.6.6.1.2 |
rldot1sMstpPendingGroupSpecifid the pending group number this vlan belonges to.rw INTEGER .1.3.6.1.4.1.89.57.6.6.1.3 |
rldot1sMstpExtPortTableA table that contains MSTP information about ports of the CIST. SEQUENCE OF Rldot1sMstpExtPortEntry .1.3.6.1.4.1.89.57.6.7 |
rldot1sMstpExtPortEntryA list of information maintained by every port
of the CIST. Rldot1sMstpExtPortEntry .1.3.6.1.4.1.89.57.6.7.1 |
rldot1sMstpExtPortPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.89.57.6.7.1.1 |
rldot1sMstpExtPortInternalOperPathCostThe contribution of this port to the path cost of
paths towards the spanning tree regional root which
include this port. 802.1S-2002 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.ro INTEGER .1.3.6.1.4.1.89.57.6.7.1.2 |
rldot1sMstpExtPortDesignatedRegionalRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.89.57.6.7.1.3 |
rldot1sMstpExtPortDesignatedRegionalCostThe regional path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.89.57.6.7.1.4 |
rldot1sMstpExtPortBoundaryIndication if the port is conented to to a lan segment
outside or inside the region.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.57.6.7.1.5 |
rldot1sMstpExtPortInternalAdminPathCostThe administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object dot1dStpPortPathCost, which
returns the operational value of the path cost.rw INTEGER .1.3.6.1.4.1.89.57.6.7.1.6 |
rldot1sMstpDesignatedMaxHopesMax number of hopes that an MST BPDU will travel inside a region.ro INTEGER .1.3.6.1.4.1.89.57.6.8 |
rldot1sMstpRegionalRootCIST Regional Root Identifier (13.16.4).
The Bridge Identifier of the current CIST Regional Root.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.89.57.6.9 |
rldot1sMstpRegionalRootCostThe CIST path cost from the transmitting Bridge to the
CIST Regional Root.ro INTEGER .1.3.6.1.4.1.89.57.6.10 |
rldot1sMstpPendingConfigurationNameThe pending configuration name.rw SnmpAdminString .1.3.6.1.4.1.89.57.6.11 |
rldot1sMstpPendingRevisionLevelThe pending revision level.rw INTEGER .1.3.6.1.4.1.89.57.6.12 |
rldot1sMstpPendingActionThe action to be done with the pending configuration.
copyPendingActive - to copy the pending mst configuration to the active one.
copyActivePending - to copy the active mst configuration to the pending one.rw Enumeration .1.3.6.1.4.1.89.57.6.13 |
rldot1sMstpRemainingHopsThis count value determines the amount of hops
the information transmitted by this bridge can travel.ro INTEGER .1.3.6.1.4.1.89.57.6.14 |
rldot1dTpAgingTime OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.7 |
rldot1dTpAgingTimeMinThe min timeout period in seconds for aging out
dynamically learned forwarding information.ro INTEGER .1.3.6.1.4.1.89.57.7.1 |
rldot1dTpAgingTimeMaxThe max timeout period in seconds for aging out
dynamically learned forwarding information.ro INTEGER .1.3.6.1.4.1.89.57.7.2 |
rlTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.89.58 |
rlTelnetMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.58.1 |
rlTelnetPasswordTelnet Passwordrw DisplayString .1.3.6.1.4.1.89.58.2 |
rlTelnetTimeoutThe number of minutes after which the TCP connection is closed
if no activity is detected from the Clientrw INTEGER .1.3.6.1.4.1.89.58.3 |
rlTelnetUsersTableThis table hold information about current telnet sessions SEQUENCE OF RlTelnetUsersEntry .1.3.6.1.4.1.89.58.4 |
rlTelnetUsersEntryThe row definition for this table. RlTelnetUsersEntry .1.3.6.1.4.1.89.58.4.1 |
rlTelnetSessionIdTelnet Session IDro INTEGER .1.3.6.1.4.1.89.58.4.1.1 |
rlTelnetSessionClientAddressTelnet Session Client IP addressro IpAddress .1.3.6.1.4.1.89.58.4.1.2 |
rlTelnetSessionLoginTimeTelnet Session Login Time stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.58.4.1.3 |
rlTelnetSessionStatusTelnet Session status. After status has been set to diconnect the
sessions is closed and the matching entry is deleted from the table.rw Enumeration .1.3.6.1.4.1.89.58.4.1.4 |
rlTelnetLoginBannerTelnet Login Banner. When telnet connection is established,
the banner is the concatanation of this MIB and rlTelnetSecondLoginBanner.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.58.5 |
rlTelnetSecondLoginBannerTelnet Login Banner Extension. When telnet connection is established,
the banner is the concatanation of rlTelnetLoginBanner and this MIBrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.58.6 |
rlPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.89.59 |
rlArpSpoofing OBJECT IDENTIFIER .1.3.6.1.4.1.89.60 |
rlArpSpoofingMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.60.1 |
rlArpSpoofingTableA list of the ifIndexes, IP addresses and corresponding MAC addresses. SEQUENCE OF RlArpSpoofingEntry .1.3.6.1.4.1.89.60.2 |
rlArpSpoofingEntryAn entry of this table specifis ifIndex,IP Address and
MAC address. RlArpSpoofingEntry .1.3.6.1.4.1.89.60.2.1 |
rlArpSpoofingIfIndexThe physical interface for which this entry contains information.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.60.2.1.1 |
rlArpSpoofingLocalIpAddrIp addres for which the device will send ARP reply (ARP spoofing).rw IpAddress .1.3.6.1.4.1.89.60.2.1.2 |
rlArpSpoofingMacAddrMAC addres with which the device will send ARP reply.
If the field is ommited or its value 0.0.0.0 the device will
send with the interface's MAC address.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.60.2.1.3 |
rlArpSpoofingRemoteIpAddrIp addres for which the device will send periodically ARP requests
if its value differs from 0.0.0.0.rw IpAddress .1.3.6.1.4.1.89.60.2.1.4 |
rlArpSpoofingOutPhysIfIndexThe physical interface to which the device will send periodically
ARP requests if its value differs from 0. If its value is 0 then ARP
requests will send to all the VLAN's ports.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.89.60.2.1.5 |
rlArpSpoofingStatusIt is used to insert, update or delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.60.2.1.6 |
rlMir OBJECT IDENTIFIER .1.3.6.1.4.1.89.61 |
rlMirMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.61.1 |
rlMirMaxNumOfMRIsAfterResetThe maximun instanses of IP Multi Instance Routers after the
following reset.rw INTEGER .1.3.6.1.4.1.89.61.2 |
rlMirMaxNumOfMRIsThe maximun instanses of IP Multi Instance Routers.ro INTEGER .1.3.6.1.4.1.89.61.3 |
rlMirCurMriNumThe number of the MRI of which MIB variables are treated at
the same time by the SNMP agent.rw INTEGER .1.3.6.1.4.1.89.61.4 |
rlMirInterfaceTableA list of the assignment ifinterfaces to IP Router instances. SEQUENCE OF RlMirInterfaceEntry .1.3.6.1.4.1.89.61.5 |
rlMirInterfaceEntryAn entry of this table specifies the MRID assignement to a L2
interfrace. RlMirInterfaceEntry .1.3.6.1.4.1.89.61.5.1 |
rlMirInterfaceIfIndexThe L2 interface for which this entry contains information.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.61.5.1.1 |
rlMirInterfaceMridMulti IP Router Instance Identifier to which the
interface is assgned.rw INTEGER .1.3.6.1.4.1.89.61.5.1.2 |
rlMirVlanBaseReservedPortsTableA list VLAN based reserved physical ports. SEQUENCE OF RlMirVlanBaseReservedPortsEntry .1.3.6.1.4.1.89.61.6 |
rlMirVlanBaseReservedPortsEntryA VLAN based reserved physical port. RlMirVlanBaseReservedPortsEntry .1.3.6.1.4.1.89.61.6.1 |
rlMirVlanBaseReservedPortsIfIndexIfIndex of VLAN based reserved physical port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.61.6.1.1 |
rlMirVlanBaseReservedPortsStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.61.6.1.2 |
rlMirVlanBaseLogicalPortsTableA list VLAN based logical ports. SEQUENCE OF RlMirVlanBaseLogicalPortsEntry .1.3.6.1.4.1.89.61.7 |
rlMirVlanBaseLogicalPortsEntryA VLAN based logical point-to-point port. RlMirVlanBaseLogicalPortsEntry .1.3.6.1.4.1.89.61.7.1 |
rlMirVlanBaseLogicalPortsIfIndexIfIndex of VLAN based Logical point-to-point port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.61.7.1.1 |
rlMirVlanBaseLogicalPortsReservedIfIndexIfIndex of VLAN based reserved physical port on which the logical
port is defined.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.61.7.1.2 |
rlMirVlanBaseLogicalPortsVlanTagVLAN tag.rw INTEGER .1.3.6.1.4.1.89.61.7.1.3 |
rlMirVlanBaseLogicalPortsStatusIt is used to add, update and delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.61.7.1.4 |
rlIpMRouteStdMIB OBJECT IDENTIFIER .1.3.6.1.4.1.89.62 |
rl3sw2swTables OBJECT IDENTIFIER .1.3.6.1.4.1.89.63 |
rl3sw2swTablesPollingIntervalThe polling interval for dynamic 3SW/2SW tables in seconds.rw INTEGER .1.3.6.1.4.1.89.63.1 |
rlGvrp OBJECT IDENTIFIER .1.3.6.1.4.1.89.64 |
rlPortGvrpTimersTableA table of GVRP timer values for every bridge
port. This is indexed by dot1dBasePort. SEQUENCE OF RlPortGvrpTimersEntry .1.3.6.1.4.1.89.64.1 |
rlPortGvrpTimersEntryGVRP timer values for a bridge port. RlPortGvrpTimersEntry .1.3.6.1.4.1.89.64.1.1 |
rlPortGvrpJoinTimeThe GVRP Join time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.89.64.1.1.1 |
rlPortGvrpLeaveTimeThe GVRP Leave time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.89.64.1.1.2 |
rlPortGvrpLeaveAllTimeThe GVRP LeaveAll time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.89.64.1.1.3 |
rlPortGvrpOverrideGarpIf enabled{1}, GVRP timer values for this port are
determined by the values in this entry. Otherwise, they
are determined by the values in dot1dPortGarpTable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.89.64.1.1.4 |
rlGvrpSupportedIs GVRP supported in this device or notro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.64.2 |
rlGvrpMibVersionMIB's version, the current version is 3.ro INTEGER .1.3.6.1.4.1.89.64.3 |
rlPortGvrpStatisticsTableA table of GVRP statistics values for every bridge
port. This is indexed by dot1dBasePort. SEQUENCE OF RlPortGvrpStatisticsEntry .1.3.6.1.4.1.89.64.4 |
rlPortGvrpStatisticsEntryGVRP statistics values for a bridge port. RlPortGvrpStatisticsEntry .1.3.6.1.4.1.89.64.4.1 |
rlPortGvrpStatisticsRJEThe number of Join Empty Received on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.1 |
rlPortGvrpStatisticsRJInThe number of Join In Received on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.2 |
rlPortGvrpStatisticsREmpThe number of Empty Received on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.3 |
rlPortGvrpStatisticsRLInThe number of Leave In Received on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.4 |
rlPortGvrpStatisticsRLEThe number of Leave Empty Received on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.5 |
rlPortGvrpStatisticsRLAThe number of Leave All Received on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.6 |
rlPortGvrpStatisticsSJEThe number of Join Empty Sent on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.7 |
rlPortGvrpStatisticsSJInThe number of Join In Sent on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.8 |
rlPortGvrpStatisticsSEmpThe number of Empty Sent on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.9 |
rlPortGvrpStatisticsSLInThe number of Leave In Sent on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.10 |
rlPortGvrpStatisticsSLEThe number of Leave Empty Sent on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.11 |
rlPortGvrpStatisticsSLAThe number of Leave All Sent on the port,
since the last clearance.ro Counter .1.3.6.1.4.1.89.64.4.1.12 |
rlPortGvrpStatisticsClearactivate - the signal/trigger to clear ALL
the rlPortGvrpStatisticsEntry's fields.
passive - specify that the rlPortGvrpStatisticsClear field is not
activate, or finshed the clearnce process.
the rlPortGvrpStatisticsClear return automatically to
passive after it was activate.rw Enumeration .1.3.6.1.4.1.89.64.4.1.13 |
rlPortGvrpErrorStatisticsTableA table of GVRP ErrorStatistics values for every bridge
port. This is indexed by dot1dBasePort. SEQUENCE OF RlPortGvrpErrorStatisticsEntry .1.3.6.1.4.1.89.64.5 |
rlPortGvrpErrorStatisticsEntryGVRP ErrorStatistics values for a bridge port. RlPortGvrpErrorStatisticsEntry .1.3.6.1.4.1.89.64.5.1 |
rlPortGvrpErrorStatisticsInvProtThe number of Invalid Protocol Id encountered by
the GVRP port. (since the last clearance)ro Counter .1.3.6.1.4.1.89.64.5.1.1 |
rlPortGvrpErrorStatisticsInvAtypThe number of Invalid Attribute Type encountered by
the GVRP port. (since the last clearance)ro Counter .1.3.6.1.4.1.89.64.5.1.2 |
rlPortGvrpErrorStatisticsInvAvalThe number of Invalid Attribute Value encountered by
the GVRP port. (since the last clearance)ro Counter .1.3.6.1.4.1.89.64.5.1.3 |
rlPortGvrpErrorStatisticsInvPlenThe number of Invalid PDU Length encountered by
the GVRP port. (since the last clearance)ro Counter .1.3.6.1.4.1.89.64.5.1.4 |
rlPortGvrpErrorStatisticsInvAlenThe number of Invalid Attribute Length encountered by
the GVRP port. (since the last clearance)ro Counter .1.3.6.1.4.1.89.64.5.1.5 |
rlPortGvrpErrorStatisticsInvEventThe number of Invalid Event encountered by
the GVRP port. (since the last clearance)ro Counter .1.3.6.1.4.1.89.64.5.1.6 |
rlPortGvrpErrorStatisticsClearactivate - the signal/trigger to clear ALL
the rlPortGvrpErrorStatisticsEntry's fields.
passive - specify that the rlPortGvrpErrorStatisticsClear field is not
activate, or finshed the clearnce process.
the rlPortGvrpErrorStatisticsClear return automatically to
passive after it was activate.rw Enumeration .1.3.6.1.4.1.89.64.5.1.7 |
rlPortGvrpApplicantStatusTableA table of GVRP Applicant Status values for every bridge
port. This is indexed by dot1dBasePort. SEQUENCE OF RlPortGvrpApplicantStatusEntry .1.3.6.1.4.1.89.64.6 |
rlPortGvrpApplicantStatusEntryGVRP Applicant Status value for a bridge port. RlPortGvrpApplicantStatusEntry .1.3.6.1.4.1.89.64.6.1 |
rlPortGvrpApplicantStatusValueparticipant - the Gvrp enabled port sending GARP PDUs.
nonParticipant - preventing the Gvrp enabled port from sending GARP PDUs.rw Enumeration .1.3.6.1.4.1.89.64.6.1.1 |
rlPortGvrpRegistrationModeTableA table of GVRP Registration Mode values for every bridge
port. This is indexed by dot1dBasePort. SEQUENCE OF RlPortGvrpRegistrationModeEntry .1.3.6.1.4.1.89.64.8 |
rlPortGvrpRegistrationModeEntryGVRP Registration Mode value for a bridge port. RlPortGvrpRegistrationModeEntry .1.3.6.1.4.1.89.64.8.1 |
rlPortGvrpRegistrationModeForbiddentrue - deregisters all VLANS on the specified port and prevents any
VLAN creation or registration on that port.
false - the registration operation on this port behaves normally.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.64.8.1.1 |
rlDot3adAgg OBJECT IDENTIFIER .1.3.6.1.4.1.89.65 |
rlEmbWeb OBJECT IDENTIFIER .1.3.6.1.4.1.89.66 |
rlSwPackageVersion OBJECT IDENTIFIER .1.3.6.1.4.1.89.67 |
rlSwPackageVersionTableThe table listing the current versions of packages
that are included in the running software. SEQUENCE OF RlSwPackageVersionEntry .1.3.6.1.4.1.89.67.1 |
rlSwPackageVersionEntryThe row definition for this table. RlSwPackageVersionEntry .1.3.6.1.4.1.89.67.1.1 |
rlSwPackageVersionNameThe Package name.ro DisplayString .1.3.6.1.4.1.89.67.1.1.1 |
rlSwPackageVersionVesrionThe Package version.ro DisplayString .1.3.6.1.4.1.89.67.1.1.2 |
rlBroadcom OBJECT IDENTIFIER .1.3.6.1.4.1.89.68 |
rlMultiSessionTerminal OBJECT IDENTIFIER .1.3.6.1.4.1.89.69 |
rlTerminalDebugModePasswordWhen a user wants to change the terminal mode
from debug mode to ASCII he must enter this password firstrw DisplayString .1.3.6.1.4.1.89.69.1 |
rlRCli OBJECT IDENTIFIER .1.3.6.1.4.1.89.70 |
rlRCliMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.70.1 |
rlRCliUserPasswordRCLI User mode Passwordrw OCTET STRING .1.3.6.1.4.1.89.70.2 |
rlRCliEnablePasswordRCLI Enable mode Passwordrw OCTET STRING .1.3.6.1.4.1.89.70.3 |
rlRCliConfigPasswordRCLI Config mode Passwordrw OCTET STRING .1.3.6.1.4.1.89.70.4 |
rlRCliTimerRCLI Timeoutrw INTEGER .1.3.6.1.4.1.89.70.5 |
rlRcliFileActionRCLI Configuration File action determines whether
The device configuration after reset will be set by
the configuration file content or not.rw Enumeration .1.3.6.1.4.1.89.70.6 |
rlBgp OBJECT IDENTIFIER .1.3.6.1.4.1.89.71 |
rlAgentsCapabilitiesGroups OBJECT IDENTIFIER .1.3.6.1.4.1.89.72 |
rlAggregateVlan OBJECT IDENTIFIER .1.3.6.1.4.1.89.73 |
rlAggregateVlanMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.73.1 |
rlAggregateVlanTableThe table creates an aggregateVlans, the IfIndex is from 10000 SEQUENCE OF RlAggregateVlanEntry .1.3.6.1.4.1.89.73.2 |
rlAggregateVlanEntryThe row definition for this table. RlAggregateVlanEntry .1.3.6.1.4.1.89.73.2.1 |
rlAggregateVlanIndexThis index indicate the aggrigateVlan id, the aggregate
vlan index is starting from 10000 InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.73.2.1.1 |
rlAggregateVlanNameThe name of the aggregateVlanrw DisplayString .1.3.6.1.4.1.89.73.2.1.2 |
rlAggregateVlanPhysAddressTypeThis variable indicates whether the physical address assigned to this
VLAN should be the default one or be chosen from the set of
reserved physical addresses of the device.rw Enumeration .1.3.6.1.4.1.89.73.2.1.3 |
rlAggregateVlanStatusThe status of the aggregateVlan table entry. It's used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.73.2.1.4 |
rlAggregateSubVlanTableThe table indicates all the allocated sub-vlans to the
aggregateVlans, an entry in the rlAggregateVlanTable must
be exist before allocating the subVlans SEQUENCE OF RlAggregateSubVlanEntry .1.3.6.1.4.1.89.73.3 |
rlAggregateSubVlanEntryThe row definition for this table. RlAggregateSubVlanEntry .1.3.6.1.4.1.89.73.3.1 |
rlAggregateSubVlanIfIndexIndicate the subVlan that allocated to the aggregate vlanro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.73.3.1.1 |
rlAggregateSubVlanStatusThe status of the aggregateSubVlan table entry.
It's used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.73.3.1.2 |
rlAggregateVlanArpProxyWhen ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on different sub-vlans,
which belong to the same Super VLAN.The router responds
with its own MAC address.
When ARP Proxy is disabled, the router responds only
to ARP requests for its own IP addresses.rw Enumeration .1.3.6.1.4.1.89.73.4 |
rlGmrp OBJECT IDENTIFIER .1.3.6.1.4.1.89.75 |
rlGmrpSupportedIs Gmrp supported in the device or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.75.1 |
rlGmrpMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.75.2 |
rlPortGmrpTimersTableA table of Gmrp timer values for every bridge
port. This is indexed by dot1dBasePort. SEQUENCE OF RlPortGmrpTimersEntry .1.3.6.1.4.1.89.75.3 |
rlPortGmrpTimersEntryGmrp timer values for a bridge port. RlPortGmrpTimersEntry .1.3.6.1.4.1.89.75.3.1 |
rlPortGmrpJoinTimeThe Gmrp Join time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.89.75.3.1.1 |
rlPortGmrpLeaveTimeThe Gmrp Leave time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.89.75.3.1.2 |
rlPortGmrpLeaveAllTimeThe Gmrp LeaveAll time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.89.75.3.1.3 |
rlPortGmrpOverrideGarpIf enabled{1}, Gmrp timer values for this port are
determined by the values in this entry. Otherwise, they
are determined by the values in dot1dPortGarpTable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.89.75.3.1.4 |
rlGmrpVlanTableThis table is to Enable/Disable Gmrp in the vlan. SEQUENCE OF RlGmrpVlanEntry .1.3.6.1.4.1.89.75.4 |
rlGmrpVlanEntryAn entry in the rlGmrpVlanTable. RlGmrpVlanEntry .1.3.6.1.4.1.89.75.4.1 |
rlGmrpVlanTagThe tag of the VLAN for which this entry contains information.ro INTEGER .1.3.6.1.4.1.89.75.4.1.1 |
rlGmrpVlanEnableEnable/Disable Gmrp in the vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.75.4.1.2 |
rlDhcpCl OBJECT IDENTIFIER .1.3.6.1.4.1.89.76 |
rlDhcpClActionTableThe (conceptual) table mentione IP address which must be
released/renewed on the interface. SEQUENCE OF RlDhcpClActionEntry .1.3.6.1.4.1.89.76.3 |
rlDhcpClActionEntryAn entry (conceptual row) in dhcpClActionTable. RlDhcpClActionEntry .1.3.6.1.4.1.89.76.3.1 |
rlDhcpClActionIfIndexThe interface which the action is implemented for
or NULL if it implemented for all device.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.76.3.1.1 |
rlDhcpClActionStatusThe status of this entry. Creating the entry renewing Dhcp
address on the interface; destroying the entry release Dhcp
address on the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.76.3.1.2 |
rlDhcpClActionHostNameThis option specifies the name of the client.rw SnmpAdminString .1.3.6.1.4.1.89.76.3.1.3 |
rlDhcpApprovalEnabledDHCP Approval feature status - enable (True) or desable (False).
Must be True only if DHCP Approval supported, device has only one
ip interface and default ip exist.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.76.4 |
rlDhcpApprovalWaitingTableIP addresses waiting for approval. SEQUENCE OF RlDhcpApprovalWaitingEntry .1.3.6.1.4.1.89.76.5 |
rlDhcpApprovalWaitingEntryAn entry in rlDhcpApprovalWaitingTable. RlDhcpApprovalWaitingEntry .1.3.6.1.4.1.89.76.5.1 |
rlDhcpApprovalWaitingIfIndexIP interface ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.76.5.1.1 |
rlDhcpApprovalWaitingAddressIP Address waiting for approval.ro IpAddress .1.3.6.1.4.1.89.76.5.1.2 |
rlDhcpApprovalWaitingMaskMask waiting for approval.ro IpAddress .1.3.6.1.4.1.89.76.5.1.3 |
rlDhcpApprovalWaitingGatewayDefault gateway of received address.ro IpAddress .1.3.6.1.4.1.89.76.5.1.4 |
rlDhcpApprovalActionTableAction for waiting ip address (approve/decline). SEQUENCE OF RlDhcpApprovalActionEntry .1.3.6.1.4.1.89.76.6 |
rlDhcpApprovalActionEntryAn entry in rlDhcpApprovalActionTable. RlDhcpApprovalActionEntry .1.3.6.1.4.1.89.76.6.1 |
rlDhcpApprovalActionIfIndexIP interface ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.76.6.1.1 |
rlDhcpApprovalActionAddressIP Address.ro IpAddress .1.3.6.1.4.1.89.76.6.1.2 |
rlDhcpApprovalActionMaskIP Address mask.ro IpAddress .1.3.6.1.4.1.89.76.6.1.3 |
rlDhcpApprovalActionApproveApprove or decline ip address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.76.6.1.4 |
rlDhcpClCommandTableAction MIB for DHCP Renew command.ro SEQUENCE OF RlDhcpClCommandEntry .1.3.6.1.4.1.89.76.7 |
rlDhcpClCommandEntryThe row definition for this table. RlDhcpClCommandEntry .1.3.6.1.4.1.89.76.7.1 |
rlDhcpClCommandActionAction to apply.rw Enumeration .1.3.6.1.4.1.89.76.7.1.2 |
rlStormCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.89.77 |
rlStormCtrlSupportIdentify if the strom control protection is supportedro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.1 |
rlStormCtrlMibVersionMIB's version, the current version is 3.ro INTEGER .1.3.6.1.4.1.89.77.2 |
rlStormCtrlRateUnitTypeSupportthe supported rate unit type for the storm rate controlro Bits .1.3.6.1.4.1.89.77.3 |
rlStormCtrlTypeSupportthe supported frame type for the storm control protectionro Bits .1.3.6.1.4.1.89.77.4 |
rlStormCtrlRateSupportPerTypeidentify if rate control is supported for each frame typero Bits .1.3.6.1.4.1.89.77.5 |
rlStormCtrlEnbaleDependencyBetweenTypesindicate enable limitation of dependency between frame types,
such as enabling of multicast should be with the enabling of
broadcast type (bcm 5632)ro Bits .1.3.6.1.4.1.89.77.6 |
rlStormCtrlRateDependencyBetweenTypesindicate limitation of dependency between frame types for
rate assignment, for example: assigning of rate limit for unicast
frame must assigning the same rate for multicast and bradcast
frame (bcm 5615), in case the device support enbale per each frame
type but with the same rate limitation.ro Bits .1.3.6.1.4.1.89.77.7 |
rlStormCtrlTableThe table contains the storm control protection per port SEQUENCE OF RlStormCtrlEntry .1.3.6.1.4.1.89.77.8 |
rlStormCtrlEntrystorm control protection, defined per port,frame type and rate RlStormCtrlEntry .1.3.6.1.4.1.89.77.8.1 |
rlStormCtrlRateTypeindicate the rate unit typerw RlStormCtrlRateUnit .1.3.6.1.4.1.89.77.8.1.1 |
rlStormCtrlUnknownUnicastEnableenable or disable the storm control for unknown unicast framesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.2 |
rlStormCtrlUnknownUnicastRateset the storm control rate limit for the unknown unicast frames,
0 indicate blocking of frames from this type.rw Unsigned-32 .1.3.6.1.4.1.89.77.8.1.3 |
rlStormCtrlUnknownMulticastEnableenable or disable the storm control for unknown multicast framesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.4 |
rlStormCtrlUnknownMulticastRateset the storm control rate limit for the unknown multicast frames,
0 indicate blocking of frames from this type.rw Unsigned-32 .1.3.6.1.4.1.89.77.8.1.5 |
rlStormCtrlBroadcastEnableenable or disable the storm control for Broadcast framesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.6 |
rlStormCtrlBroadcastRateset the storm control rate limit for the Broadcast frames,
0 indicate blocking of frames from this type.rw Unsigned-32 .1.3.6.1.4.1.89.77.8.1.7 |
rlStormCtrlMulticastEnableenable or disable the storm control for multicast framesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.8 |
rlStormCtrlMulticastRateset the storm control rate limit for the multicast frames,
0 indicate blocking of frames from this type.rw Unsigned-32 .1.3.6.1.4.1.89.77.8.1.9 |
rlStormCtrlSetDefaultRateTypeindicate if return the rate unit type to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.10 |
rlStormCtrlSetDefaultUnknownUnicastEnableindicate if return the storm control enable for unknown unicast frames
to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.11 |
rlStormCtrlSetDefaultUnknownUnicastRateindicate if return the storm control rate limit for the unknown unicast frames
to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.12 |
rlStormCtrlSetDefaultUnknownMulticastEnableindicate if return the storm control enable for unknown multicast frames
to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.13 |
rlStormCtrlSetDefaultUnknownMulticastRateindicate if return the storm control rate limit for the unknown multicast frames
to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.14 |
rlStormCtrlSetDefaultBroadcastEnableindicate if return the storm control enable for Broadcast frames
to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.15 |
rlStormCtrlSetDefaultBroadcastRateindicate if return the storm control rate limit for the Broadcast frames
to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.16 |
rlStormCtrlSetDefaultMulticastEnableindicate if return the storm control for multicast frames
to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.17 |
rlStormCtrlSetDefaultMulticastRateindicate if return the storm control rate limit for the multicast frames
to its default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.77.8.1.18 |
rlStormCtrlGroupTableThe table contains per port for each supported frame type
to which group it belongs. SEQUENCE OF RlStormCtrlGroupEntry .1.3.6.1.4.1.89.77.9 |
rlStormCtrlGroupEntrygroup id for each supported frame type defined per port. RlStormCtrlGroupEntry .1.3.6.1.4.1.89.77.9.1 |
rlStormCtrlGroupUnknownUnicastIdIndicates the id of the group for unknown unicast frame type that
the port belongs to,
0 indicates that unknown unicast frame type is not supported.ro INTEGER .1.3.6.1.4.1.89.77.9.1.1 |
rlStormCtrlGroupUnknownMulticastIdIndicates the id of the group for unknown multicast frame type that
the port belongs to,
0 indicates that unknown multicast frame type is not supported.ro INTEGER .1.3.6.1.4.1.89.77.9.1.2 |
rlStormCtrlGroupBroadcastIdIndicates the id of the group for broadcast frame type that
the port belongs to,
0 indicates that broadcast frame type is not supported.ro INTEGER .1.3.6.1.4.1.89.77.9.1.3 |
rlStormCtrlGroupMulticastIdIndicates the id of the group for multicast frame type that
the port belongs to,
0 indicates that multicast frame type is not supported.ro INTEGER .1.3.6.1.4.1.89.77.9.1.4 |
rlSsh OBJECT IDENTIFIER .1.3.6.1.4.1.89.78 |
rlAAA OBJECT IDENTIFIER .1.3.6.1.4.1.89.79 |
rlRadius OBJECT IDENTIFIER .1.3.6.1.4.1.89.80 |
rlTraceRoute OBJECT IDENTIFIER .1.3.6.1.4.1.89.81 |
rlTraceRouteMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.81.1 |
rlSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.89.82 |
rlEnv OBJECT IDENTIFIER .1.3.6.1.4.1.89.83 |
rlSmon OBJECT IDENTIFIER .1.3.6.1.4.1.89.84 |
rlPortCopyMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.84.1 |
rlPortCopySupportsupported - The standard portCopy is supported.
notSupported - the standard portCopy is not supported.
only basic portCopy operation is supported.ro Enumeration .1.3.6.1.4.1.89.84.2 |
rlPortCopyVlanTaggingTableA supplementing table for portCopyTable.
For every portCopyDest a vlan-tagging option is available. SEQUENCE OF RlPortCopyVlanTaggingEntry .1.3.6.1.4.1.89.84.3 |
rlPortCopyVlanTaggingEntryEach entry specify how mirrored packets will transmit from
the portCopyDest: Tagged or unTagged.
The values in this entry will be valid only when the
dot1dBasePort will be configured as a portCopyDest
in the portCopyTable. RlPortCopyVlanTaggingEntry .1.3.6.1.4.1.89.84.3.1 |
rlPortCopyVlanTaggingTRUE - Mirrored packets will transmit from portCopyDest - Tagged
FALSE - Mirrored packets will transmit from portCopyDest - unTaggedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.84.3.1.1 |
rlSocket OBJECT IDENTIFIER .1.3.6.1.4.1.89.85 |
rlSocketMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.85.1 |
rlSocketTableThe (conceptual) table listing the sockets which are currently
open in the system. SEQUENCE OF RlSocketEntry .1.3.6.1.4.1.89.85.2 |
rlSocketEntryAn entry (conceptual row) in the SocketTable. RlSocketEntry .1.3.6.1.4.1.89.85.2.1 |
rlSocketIdThe value of the id of the socket.ro INTEGER .1.3.6.1.4.1.89.85.2.1.1 |
rlSocketTypeSpecifies the type of the socket.ro Enumeration .1.3.6.1.4.1.89.85.2.1.2 |
rlSocketStateSpecifies the state in which the socket is in.ro Enumeration .1.3.6.1.4.1.89.85.2.1.3 |
rlSocketBlockModeSpecifies the blocking mode of the socket.ro Enumeration .1.3.6.1.4.1.89.85.2.1.4 |
rlSocketUpTimeThe time elapsed since this socket was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.85.2.1.5 |
rlDigitalKeyManage OBJECT IDENTIFIER .1.3.6.1.4.1.89.86 |
rlMD5KeyChainTableKey-chains and key ID's SEQUENCE OF RlMD5KeyChainEntry .1.3.6.1.4.1.89.86.1 |
rlMD5KeyChainEntryKey-chain with key ID that belongs to this chain RlMD5KeyChainEntry .1.3.6.1.4.1.89.86.1.1 |
rlMD5KeyChainNameName of the key-chain to which belongs
the secret authentication keyro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.86.1.1.1 |
rlMD5KeyChainKeyIdA 8-bit identifier for the secret authentication key.
This identifier is the same as key ID used in rlMD5KeyTable.ro INTEGER .1.3.6.1.4.1.89.86.1.1.2 |
rlMD5KeyChainKeyRowStatusIt is used to insert, update or delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.86.1.1.3 |
rlMD5KeyTableSecret authentication keys
used by MD5 Authentication Algorithm SEQUENCE OF RlMD5KeyEntry .1.3.6.1.4.1.89.86.2 |
rlMD5KeyEntrySecret authentication key with all related parameters RlMD5KeyEntry .1.3.6.1.4.1.89.86.2.1 |
rlMD5KeyIdA 8-bit identifier for the secret authentication keyro INTEGER .1.3.6.1.4.1.89.86.2.1.1 |
rlMD5KeyThe 128-bit secret authentication key.
The key can get value only once and cannot be modified.
When read, rlMD5KeyChainKey always returns an
Octet String of length zero.rw DisplayString .1.3.6.1.4.1.89.86.2.1.2 |
rlMD5KeyStartAcceptThe time that the router will start accepting packets
that have been created with the given keyrw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.89.86.2.1.3 |
rlMD5KeyStartGenerateThe time that the router will start using the key
for packet generationrw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.89.86.2.1.4 |
rlMD5KeyStopGenerateThe time that the router will stop using the key
for packet generationrw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.89.86.2.1.5 |
rlMD5KeyStopAcceptThe time that the router will stop accepting packets
that have been created with the given keyrw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.89.86.2.1.6 |
rlMD5KeyRowStatusIt is used to insert, update or delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.86.2.1.7 |
rlCopy OBJECT IDENTIFIER .1.3.6.1.4.1.89.87 |
rlQosCliMib OBJECT IDENTIFIER .1.3.6.1.4.1.89.88 |
rlMngInf OBJECT IDENTIFIER .1.3.6.1.4.1.89.89 |
rlPhy OBJECT IDENTIFIER .1.3.6.1.4.1.89.90 |
rlJumboFrames OBJECT IDENTIFIER .1.3.6.1.4.1.89.91 |
rlJumboFramesCurrentStatusShow the current Jumbo Frames statusro Enumeration .1.3.6.1.4.1.89.91.1 |
rlJumboFramesStatusAfterResetSet the Jumbo Frames status after resetrw Enumeration .1.3.6.1.4.1.89.91.2 |
rlTimeSynchronization OBJECT IDENTIFIER .1.3.6.1.4.1.89.92 |
rlDnsCl OBJECT IDENTIFIER .1.3.6.1.4.1.89.93 |
rlCDB OBJECT IDENTIFIER .1.3.6.1.4.1.89.94 |
rlStartupCDBChangedIndicates whether the startup CDB has changed between the router's
last two rebootsro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.94.1 |
rlManualRebootIndicates whether the device was shutdown orderly before reboot or
not (i.e. power failure)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.94.2 |
rldot1x OBJECT IDENTIFIER .1.3.6.1.4.1.89.95 |
rldot1xMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.95.1 |
rldot1xExtAuthSessionStatsTableA table that contains the session statistics objects
for the Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself. SEQUENCE OF Rldot1xExtAuthSessionStatsEntry .1.3.6.1.4.1.89.95.2 |
rldot1xExtAuthSessionStatsEntryThe session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where
there is no session currently active. Rldot1xExtAuthSessionStatsEntry .1.3.6.1.4.1.89.95.2.1 |
rlDot1xAuthSessionAuthenticMethodThe authentication method used to establish the
session.ro Enumeration .1.3.6.1.4.1.89.95.2.1.1 |
rldot1xGuestVlanSupportedindicate if guest vlan is supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.95.3 |
rldot1xGuestVlanVIDspecify the guest vlan tag , 0 for non exiting.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.95.4 |
rldot1xGuestVlanPortsthe ports that can be members in the guest vlanrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.95.5 |
rldot1xUnAuthenticatedVlanSupportedindicate if unauthenticated Vlan is supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.95.6 |
rldot1xUnAuthenticatedVlanTableport belong to vlan in all port authenticated state except force unauthenticated table SEQUENCE OF Rldot1xUnAuthenticatedVlanEntry .1.3.6.1.4.1.89.95.7 |
rldot1xUnAuthenticatedVlanEntryport belong to vlan in all port authenticated state except force unauthenticated entry Rldot1xUnAuthenticatedVlanEntry .1.3.6.1.4.1.89.95.7.1 |
rldot1xUnAuthenticatedVlanStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.95.7.1.1 |
rldot1xUserBasedVlanSupportedindicate if user based Vlan is supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.95.8 |
rldot1xUserBasedVlanPortsthe ports that can be members in the user based vlanrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.95.9 |
rldot1xAuthenticationPortTableA table of system level information for each port
supported by the Port Access Entity. An entry appears
in this table for each port of this system. SEQUENCE OF Rldot1xAuthenticationPortEntry .1.3.6.1.4.1.89.95.10 |
rldot1xAuthenticationPortEntryThe Port number and mac method Rldot1xAuthenticationPortEntry .1.3.6.1.4.1.89.95.10.1 |
rldot1xAuthenticationPortMethodThe value of the mac based authenication.rw Enumeration .1.3.6.1.4.1.89.95.10.1.1 |
rldot1xAuthMultiStatsTableA table that contains the statistics objects for the
Authenticator PAE associated with each Port and MAC for
multisession 802.1x mode of operation.
An entry appears in this table for each port and MAC that have an
authentication session currently running under way for them. SEQUENCE OF Rldot1xAuthMultiStatsEntry .1.3.6.1.4.1.89.95.11 |
rldot1xAuthMultiStatsEntryThe statistics information for an Authenticator PAE. Rldot1xAuthMultiStatsEntry .1.3.6.1.4.1.89.95.11.1 |
rldot1xAuthMultiStatsPortNumberPort Number.ro INTEGER .1.3.6.1.4.1.89.95.11.1.1 |
rldot1xAuthMultiStatsSourceMacMac of the authentication session.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.95.11.1.2 |
rldot1xAuthMultiEapolFramesRxThe number of valid EAPOL frames of any type
that have been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.89.95.11.1.3 |
rldot1xAuthMultiEapolFramesTxThe number of EAPOL frames of any type
that have been transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.89.95.11.1.4 |
rldot1xAuthMultiEapolStartFramesRxThe number of EAPOL Start frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.89.95.11.1.5 |
rldot1xAuthMultiEapolLogoffFramesRxThe number of EAPOL Logoff frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.89.95.11.1.6 |
rldot1xAuthMultiEapolRespIdFramesRxThe number of EAP Resp/Id frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.89.95.11.1.7 |
rldot1xAuthMultiEapolRespFramesRxThe number of valid EAP Response frames
(other than Resp/Id frames) that have been
received by this Authenticator.ro Counter32 .1.3.6.1.4.1.89.95.11.1.8 |
rldot1xAuthMultiEapolReqIdFramesTxThe number of EAP Req/Id frames that have been
transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.89.95.11.1.9 |
rldot1xAuthMultiEapolReqFramesTxThe number of EAP Request frames
(other than Rq/Id frames) that have been
transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.89.95.11.1.10 |
rldot1xAuthMultiInvalidEapolFramesRxThe number of EAPOL frames that have been
received by this Authenticator in which the
frame type is not recognized.ro Counter32 .1.3.6.1.4.1.89.95.11.1.11 |
rldot1xAuthMultiEapLengthErrorFramesRxThe number of EAPOL frames that have been received
by this Authenticator in which the Packet Body
Length field is invalid.ro Counter32 .1.3.6.1.4.1.89.95.11.1.12 |
rldot1xAuthMultiDiagTableA table that contains the diagnostics objects for the
Authenticator PAE associated with each Port and MAC.
An entry appears in this table for each port and MAC that have an
authentication session currently running under way for them. SEQUENCE OF Rldot1xAuthMultiDiagEntry .1.3.6.1.4.1.89.95.12 |
rldot1xAuthMultiDiagEntryThe diagnostics information for an Authenticator PAE. Rldot1xAuthMultiDiagEntry .1.3.6.1.4.1.89.95.12.1 |
rldot1xAuthMultiDiagPortNumberPort Number.ro INTEGER .1.3.6.1.4.1.89.95.12.1.1 |
rldot1xAuthMultiDiagSourceMacMac of the authentication session.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.95.12.1.2 |
rldot1xAuthMultiEntersConnectingCounts the number of times that the state machine
transitions to the CONNECTING state from any other
state.ro Counter32 .1.3.6.1.4.1.89.95.12.1.3 |
rldot1xAuthMultiEntersAuthenticatingCounts the number of times that the state machine
transitions from CONNECTING to AUTHENTICATING, as a
result of an EAP-Response/Identity message being
received from the Supplicant.ro Counter32 .1.3.6.1.4.1.89.95.12.1.4 |
rldot1xAuthMultiAuthSuccessWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to AUTHENTICATED, as a
result of the Backend Authentication state machine
indicating successful authentication of the Supplicant
(authSuccess = TRUE).ro Counter32 .1.3.6.1.4.1.89.95.12.1.5 |
rldot1xAuthMultiAuthFailWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to HELD, as a result
of the Backend Authentication state machine indicating
authentication failure (authFail = TRUE).ro Counter32 .1.3.6.1.4.1.89.95.12.1.6 |
rldot1xAuthMultiAuthReauthsWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of a reauthentication request (reAuthenticate = TRUE).ro Counter32 .1.3.6.1.4.1.89.95.12.1.7 |
rldot1xAuthMultiAuthEapStartsWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPOL-Start message being received
from the Supplicant.ro Counter32 .1.3.6.1.4.1.89.95.12.1.8 |
rldot1xAuthMultiAuthReauthsWhileAuthenticatedCounts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of a reauthentication request
(reAuthenticate = TRUE).ro Counter32 .1.3.6.1.4.1.89.95.12.1.9 |
rldot1xAuthMultiAuthEapStartsWhileAuthenticatedCounts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of an EAPOL-Start message being received from the
Supplicant.ro Counter32 .1.3.6.1.4.1.89.95.12.1.10 |
rldot1xAuthMultiBackendResponsesCounts the number of times that the state machine sends
an initial Access-Request packet to the Authentication
server (i.e., executes sendRespToServer on entry to the
RESPONSE state). Indicates that the Authenticator
attempted communication with the Authentication Server.ro Counter32 .1.3.6.1.4.1.89.95.12.1.11 |
rldot1xAuthMultiBackendAccessChallengesCounts the number of times that the state machine
receives an initial Access-Challenge packet from the
Authentication server (i.e., aReq becomes TRUE,
causing exit from the RESPONSE state). Indicates that
the Authentication Server has communication with
the Authenticator.ro Counter32 .1.3.6.1.4.1.89.95.12.1.12 |
rldot1xAuthMultiBackendOtherRequestsToSupplicantCounts the number of times that the state machine
sends an EAP-Request packet (other than an Identity,
Notification, Failure or Success message) to the
Supplicant (i.e., executes txReq on entry to the
REQUEST state). Indicates that the Authenticator chose
an EAP-method.ro Counter32 .1.3.6.1.4.1.89.95.12.1.13 |
rldot1xAuthMultiBackendNonNakResponsesFromSupplicantCounts the number of times that the state machine
receives a response from the Supplicant to an initial
EAP-Request, and the response is something other than
EAP-NAK (i.e., rxResp becomes TRUE, causing the state
machine to transition from REQUEST to RESPONSE,
and the response is not an EAP-NAK). Indicates that
the Supplicant can respond to the Authenticators
chosen EAP-method.ro Counter32 .1.3.6.1.4.1.89.95.12.1.14 |
rldot1xAuthMultiBackendAuthSuccessesCounts the number of times that the state machine
receives an EAP-Success message from the Authentication
Server (i.e., aSuccess becomes TRUE, causing a
transition from RESPONSE to SUCCESS). Indicates that
the Supplicant has successfully authenticated to
the Authentication Server.ro Counter32 .1.3.6.1.4.1.89.95.12.1.15 |
rldot1xAuthMultiSessionStatsTableA table that contains the session statistics objects
for the Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself. SEQUENCE OF Rldot1xAuthMultiSessionStatsEntry .1.3.6.1.4.1.89.95.13 |
rldot1xAuthMultiSessionStatsEntryThe session statistics information for an Authenticator
PAE. This shows the mandatory values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where
there is no session currently active. Rldot1xAuthMultiSessionStatsEntry .1.3.6.1.4.1.89.95.13.1 |
rldot1xAuthMultiSessionStatsPortNumberPort Number.ro INTEGER .1.3.6.1.4.1.89.95.13.1.1 |
rldot1xAuthMultiSessionStatsSourceMacMac of the authentication session.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.95.13.1.2 |
rldot1xAuthMultiSessionOctetsRxThe number of octets received in user data
frames on this Port during the session.ro Counter64 .1.3.6.1.4.1.89.95.13.1.3 |
rldot1xAuthMultiSessionOctetsTxThe number of octets transmitted in user data
frames on this Port during the session.ro Counter64 .1.3.6.1.4.1.89.95.13.1.4 |
rldot1xAuthMultiSessionFramesRxThe number of user data frames received
on this Port during the session.ro Counter32 .1.3.6.1.4.1.89.95.13.1.5 |
rldot1xAuthMultiSessionFramesTxThe number of user data frames transmitted
on this Port during the session.ro Counter32 .1.3.6.1.4.1.89.95.13.1.6 |
rldot1xAuthMultiSessionIdA unique identifier for the session, in the
form of a printable ASCII string of at least
three characters.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.89.95.13.1.7 |
rldot1xAuthMultiSessionTimeThe duration of the session in seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.95.13.1.8 |
rldot1xAuthMultiSessionUserNameThe User-Name representing the identity of the
Supplicant PAE.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.89.95.13.1.9 |
rldot1xAuthMultiConfigTableA table that contains the configuration objects for the
Authenticator PAE associated with each port and MAC.
An entry appears in this table for each port and MAC that may
authenticate access to itself. SEQUENCE OF Rldot1xAuthMultiConfigEntry .1.3.6.1.4.1.89.95.14 |
rldot1xAuthMultiConfigEntryThe configuration information for an Authenticator
PAE. Rldot1xAuthMultiConfigEntry .1.3.6.1.4.1.89.95.14.1 |
rldot1xAuthMultiPortNumberPort Number.ro INTEGER .1.3.6.1.4.1.89.95.14.1.1 |
rldot1xAuthMultiSourceMacMac of the authentication session.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.95.14.1.2 |
rldot1xAuthMultiPaeStateThe current value of the Authenticator PAE state
machine.ro Enumeration .1.3.6.1.4.1.89.95.14.1.3 |
rldot1xAuthMultiBackendAuthStateThe current state of the Backend Authentication
state machine.ro Enumeration .1.3.6.1.4.1.89.95.14.1.4 |
rldot1xAuthMultiControlledPortStatusThe current value of the controlled Port
status parameter for the Port.ro PaeControlledPortStatus (IEEE8021-PAE-MIB) .1.3.6.1.4.1.89.95.14.1.5 |
rldot1xBpduFilteringEnabledSpecify that when 802.1x is globally disabled,
802.1x BPDU packets would be filtered or bridged.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.95.15 |
rlFile OBJECT IDENTIFIER .1.3.6.1.4.1.89.96 |
rlAAAEap OBJECT IDENTIFIER .1.3.6.1.4.1.89.97 |
rlSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.89.98 |
rlSsl OBJECT IDENTIFIER .1.3.6.1.4.1.89.100 |
rlMacBasePrio OBJECT IDENTIFIER .1.3.6.1.4.1.89.101 |
rlWlanAccessPoint OBJECT IDENTIFIER .1.3.6.1.4.1.89.102 |
rlLocalization OBJECT IDENTIFIER .1.3.6.1.4.1.89.103 |
rlRs232 OBJECT IDENTIFIER .1.3.6.1.4.1.89.104 |
rlNicRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.89.105 |
rlAmap OBJECT IDENTIFIER .1.3.6.1.4.1.89.106 |
rlStack OBJECT IDENTIFIER .1.3.6.1.4.1.89.107 |
rlPoe OBJECT IDENTIFIER .1.3.6.1.4.1.89.108 |
rlUPnP OBJECT IDENTIFIER .1.3.6.1.4.1.89.109 |
rlLldp OBJECT IDENTIFIER .1.3.6.1.4.1.89.110 |
rlOib OBJECT IDENTIFIER .1.3.6.1.4.1.89.111 |
rlBridgeSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.89.112 |
rlDhcpSpoofing OBJECT IDENTIFIER .1.3.6.1.4.1.89.113 |
rlBonjour OBJECT IDENTIFIER .1.3.6.1.4.1.89.114 |
rlLinksysSmartMIB OBJECT IDENTIFIER .1.3.6.1.4.1.89.115 |
rlBrgMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.89.116 |
rlBrgMcMngr OBJECT IDENTIFIER .1.3.6.1.4.1.89.117 |
rlGlobalIpAddrTable OBJECT IDENTIFIER .1.3.6.1.4.1.89.118 |
dlPrivate OBJECT IDENTIFIER .1.3.6.1.4.1.89.119 |
rlSecuritySuiteMib OBJECT IDENTIFIER .1.3.6.1.4.1.89.120 |
rlIntel OBJECT IDENTIFIER .1.3.6.1.4.1.89.121 |
rlAutoUpdate OBJECT IDENTIFIER .1.3.6.1.4.1.89.123 |
rlCpuCounters OBJECT IDENTIFIER .1.3.6.1.4.1.89.124 |
rlWlanMIB OBJECT IDENTIFIER .1.3.6.1.4.1.89.200 |
rndEndOfMibGroup OBJECT IDENTIFIER .1.3.6.1.4.1.89.1000 |
rndEndOfMibThis variable indicates this is the end of RND MIB.ro INTEGER .1.3.6.1.4.1.89.1000.1 |