RADWARE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for RADWARE-MIB.
604
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
604 total| Object Name |
|---|
rnd OBJECT IDENTIFIER .1.3.6.1.4.1.89 |
RFC1155-SMI Unknown .1.3.6.1.4.1.89 |
routeTableOverflowAn overflow condition has occurred in the Routing Table. The Routing
Table is used for IP routing algorithm (RIP). TRAP-TYPE .1.3.6.1.4.1.89.0.5 |
resetRequiredThis trap indicates that in order to perform the last SET request, a reset operation
of the router/bridge is required. This occurs when the layer 2 routing algorithm is
changed between SPF and Spanning Tree. The reset can be performed manually or
using the variable rndAction. TRAP-TYPE .1.3.6.1.4.1.89.0.10 |
endTftpThis trap indicates that in the device finished a TFTP
transaction with the management station.
variable rndErrorDesc and rndErrorSeverity provides the actual message
text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.12 |
abortTftpThis trap indicates that in the device aborted a TFTP session with the management station.
variable rndErrorDesc and rndErrorSeverity provides the actual message text and
severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.13 |
startTftpInformational trap indicating that the device has intiated a
TFTP session. rndErrorDesc will contain the file type in
question TRAP-TYPE .1.3.6.1.4.1.89.0.14 |
ipxRipTblOverflowThis trap indicates that in an OpenGate IPX RIP table overflow.
The bound variable rndErrorDesc, rndErrorSeverity
provides the actual message text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.36 |
ipxSapTblOverflowThis trap indicates that in an OpenGate IPX SAP table overflow.
The bound variable rndErrorDesc, rndErrorSeverity
provides the actual message text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.37 |
facsAccessVoilationThis trap indicates that message that fits FACS statenebt with operation
blockAndReport was forward to the interface.The bound variable rndErrorDesc,
rndErrorSeverity(== info ) and interface Number. TRAP-TYPE .1.3.6.1.4.1.89.0.49 |
autoConfigurationCompletedThis trap indicates that auto comfiguration completetd succssefully.
The bound variable rndErrorDesc, rndErrorSeverity(== info ) TRAP-TYPE .1.3.6.1.4.1.89.0.50 |
forwardingTabOverflowThis trap indicates that an overflow condition has occurred in the
layer II Forward Table.
The bound variable rndErrorDesc, rndErrorSeverity(== warning ) TRAP-TYPE .1.3.6.1.4.1.89.0.51 |
errorsDuringInit TRAP-TYPE .1.3.6.1.4.1.89.0.61 |
vlanDynPortAdded TRAP-TYPE .1.3.6.1.4.1.89.0.66 |
vlanDynPortRemoved TRAP-TYPE .1.3.6.1.4.1.89.0.67 |
rsSDclientsTableOverflowThis warning is generated when an overflow occurs in the clients table. TRAP-TYPE .1.3.6.1.4.1.89.0.68 |
rsSDinactiveServerThis warning is generated when a server does not respond to the dispatchers polling
and is thought to be inactive. TRAP-TYPE .1.3.6.1.4.1.89.0.69 |
rsIpZhrConnectionsTableOverflowThe Zero Hop Routing connections Table has been overflown. TRAP-TYPE .1.3.6.1.4.1.89.0.70 |
rsIpZhrReqStaticConnNotAcceptedThe requested static connection was not accepted because there is
no available IP virtual address to allocate to it. TRAP-TYPE .1.3.6.1.4.1.89.0.71 |
rsIpZhrVirtualIpAsSourceThe virtual IP address appeared as a source IP.
All the connections using it will be deleted and
it will not be further allocated to new connections. TRAP-TYPE .1.3.6.1.4.1.89.0.72 |
rsIpZhrNotAllocVirtualIpThe source IP address sent an ARP specifying a virtual IP
which was not allocated for this source.
This virtual IP will not be allocated to connections of this
specific source IP. TRAP-TYPE .1.3.6.1.4.1.89.0.73 |
rsSnmpSetRequestInSpecialCfgStateAn incoming SNMP SET request was rejected because no such
requests (except action requests) are accepted after start of
new configuration reception or during sending the current
configuration to an NMS. TRAP-TYPE .1.3.6.1.4.1.89.0.74 |
rsWSDRedundancySwitchWhenever main server fails and backup takes over or server comes
up after failure a trap of this type is issued. TRAP-TYPE .1.3.6.1.4.1.89.0.141 |
rndMng OBJECT IDENTIFIER .1.3.6.1.4.1.89.1 |
rndSysIdIdentification of an RND device. The device type for each
integer clarifies the sysObjectID in MIB - II.ro Enumeration .1.3.6.1.4.1.89.1.1 |
rndActionThis variable enables the operator to perform one of the
specified actions on the tables maintained by the network device.
Send actions require support of proprietery File exchange
protocol.rw Enumeration .1.3.6.1.4.1.89.1.2 |
rndFileNameThe name of the file used internally by RND for transferring
tables maintained by network devices, using a prorietary File
exchange protocol.rw OCTET STRING -- SIZE 256 .1.3.6.1.4.1.89.1.3 |
rndDeviceParams OBJECT IDENTIFIER .1.3.6.1.4.1.89.2 |
rndBridgeTypeIdentification of the RND bridge type.ro Enumeration .1.3.6.1.4.1.89.2.1 |
rndInactiveArpTimeOutThis variable defines the maximum time period that can pass
between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table.rw INTEGER .1.3.6.1.4.1.89.2.2 |
rndBridgeAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.3 |
rndErrorDescA textual description of the enterprise-specific trap sent
to the Network Management Station by the RND managed device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.3.1 |
rndErrorSeverityThe severity type of the enterprise-specific trap sent to the
Network Management Station by the RND managed device.ro INTEGER .1.3.6.1.4.1.89.2.3.2 |
rndBrgVersionThe bridge version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.4 |
rndBrgFeaturesA bit mask that defines the features supported by a particular configuration
of this network element:
__________________________________________
| Byte 1|Byte 2 |Byte 3 | ....|Byte 20 |
|87654321| | 87654321|
|________|_______________________________|
Byte1 :
bit1: TX Block mask
bit2: Source Routing Encapulation
bit3: SNA/SDLC
bit4: Frame Relay
bit5: SNMP
bit6: LAN Manager
bit7: High Performance
bit8: Translation
Byte2 :
bit1: DEC Router
bit2: IPX Router
bit3: IP Router
Byte3 :
bit1: Dial Up Backup
bit2: COD
bit3: FACS
bit4: Load Balance
bit5: Remote Configuration
bit6: RIP 2
bit7: OSPF
bit8: IPX RIP/SAP Filter
Byte4 :
bit1: BootP Server
bit2: BootP Client
bit3: Compression
bit4: V25.bis
bit5: ISDN
bit6: CODv2
bit7: NSPF
bit8: UDP Relay
Byte5
bit1:VirtualLAN
bit2:Static IP Multicast
bit3:IP Redundancy
bit4:CCM2
bit5:ISDN Bonding
bit6:Backup Link Selection
bit7:IP/IPX Forwarding
bit8:Improved COD
Byte6
bit1: Server Disptacher
bit2: ISDN_US
bit3: PPP
bit4: IP Rip Filter
bit5: Zero Hop Routing
bit6: ISDN Japan
Byte7
bit1: With unmanaged Switch
bit2: 2 LANs
bit3: OSPF Ver 2.0
bit4: FACS Ver 2.0
bit5: Multiple WEB Farm
bit6: Backup Serverro OCTET STRING -- SIZE 20 .1.3.6.1.4.1.89.2.5 |
rndBrgLicenseThis parameter is used for entering a s/w license number for a device.
A separate license number is supplied for each device.rw OCTET STRING -- SIZE 20 .1.3.6.1.4.1.89.2.6 |
rndIpHost OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.7 |
rndICMPTransmitionEnableThis variable controlls the ability to transmit ICMP framesrw Enumeration .1.3.6.1.4.1.89.2.7.1 |
rndCommunityTableThe community table of the agent SEQUENCE OF RndCommunityEntry .1.3.6.1.4.1.89.2.7.2 |
rndCommunityEntryThe row definition for this table. RndCommunityEntry .1.3.6.1.4.1.89.2.7.2.1 |
rndCommunityMngStationAddrThe management station that will be allowed to
communicate with the agent IP addressrw IpAddress .1.3.6.1.4.1.89.2.7.2.1.1 |
rndCommunityStringThe community string with which the management
station will communicate with the agentrw DisplayString .1.3.6.1.4.1.89.2.7.2.1.2 |
rndCommunityAccessThe allowed access to this management stationrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.3 |
rndCommunityTrapsEnableShould the agent send traps to the management stationrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.4 |
rndCommunityStatusThe status of this entry. If the status is invalid the
community entry will be deletedrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.5 |
rndManagedTimeThe time will be sent in the format hhmmssrw DisplayString .1.3.6.1.4.1.89.2.8 |
rndManagedDateThe date will be sent in the format ddmmyyyyrw DisplayString .1.3.6.1.4.1.89.2.9 |
genGroup OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.11 |
genGroupHWVersionDefines the HW version of the product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.11.1 |
genGroupConfigurationSymbolDefines the Configuration Symbol attached to any hardware module
manufactured by LANNET. One single character A..Z defines the CS
version.ro DisplayString .1.3.6.1.4.1.89.2.11.2 |
genGroupHWStatusThis attribute describes the status of the group hardware as detected
by the sensors software.ro Enumeration .1.3.6.1.4.1.89.2.11.3 |
rndInterface OBJECT IDENTIFIER .1.3.6.1.4.1.89.4 |
rndIfTableRND-specific interface table. Each table entry includes an
index, Board number, Network Address, interface status, clock
indicator and interface cost. SEQUENCE OF RndIfEntry .1.3.6.1.4.1.89.4.1 |
rndIfEntryThe row definition for this table. RndIfEntry .1.3.6.1.4.1.89.4.1.1 |
rndIfIndexIndex to the RND Interface Table. The interface defined by a
particular value of this index is the same interface as
identified by the same value of ifIndex (MIBII).ro INTEGER .1.3.6.1.4.1.89.4.1.1.1 |
rndIfBoardNumThe interface defined by this entry correspTnds to the board
defined by the same value of rndSlotBoardNum in the rndSlotTab.ro INTEGER .1.3.6.1.4.1.89.4.1.1.2 |
rndIfNetAddressThe IP address of the interface defined by the particular value of
rndIfIndex.ro NetworkAddress .1.3.6.1.4.1.89.4.1.1.3 |
rndIfStatusThe current status of the interface.ro Enumeration .1.3.6.1.4.1.89.4.1.1.4 |
rndIfClockTyperndIfClockType defines the type of clock each interface
uses: internal or external.rw Enumeration .1.3.6.1.4.1.89.4.1.1.5 |
rndIfBaudRateDefines the baud rate of use by the interface. The valid
rates are determined by the type of the media for which this
baud rate is defined.rw INTEGER -- word .1.3.6.1.4.1.89.4.1.1.6 |
rndIfCostThis variable assigns a transmission cost to the interface
(channel or LAN). These costs are used in Level II routing. The
costs aretypically inversly proportional to the channel quality.rw INTEGER -- word .1.3.6.1.4.1.89.4.1.1.7 |
rndIfCompressionDefines whether data compression is enabled or disabled for the
interface.rw Enumeration .1.3.6.1.4.1.89.4.1.1.8 |
rndIfCompressionStatusDefines the status of the compression component:
not-inserted - Compression component is not in the device
active - Compression is enabled and operates correctly
not-active - Compression is enables but does not operate.
The reason may be that there is no compression
component on the device connected to this interface.
disabled - Compression was disabled by management, using
variable rndCompression.ro Enumeration .1.3.6.1.4.1.89.4.1.1.9 |
rndIfCompressionRatePercentage of compression. This variable applies only
if rndCompressionStatus is active.ro INTEGER .1.3.6.1.4.1.89.4.1.1.10 |
rndIfLATCompressionEnable/Disable the LAT Compression.rw Enumeration .1.3.6.1.4.1.89.4.1.1.11 |
rndIfCompressionTypeThis parameter indicates the type of compression option available in the device.
none(1) - indicates that there is no compression option in the device
lowSpeed(2) - indicates a compression option which is operational up
to line speed sof 64 kbps.
highSpeed(3)- indicates a compression option which is operational up
to line speeds of 2 Mbps.ro Enumeration .1.3.6.1.4.1.89.4.1.1.12 |
rndIfFilterModeThis parameter indicates the type of filtering in the device.rw Enumeration .1.3.6.1.4.1.89.4.1.1.13 |
rndIfChannelTypeThe type of the WAN channelrw Enumeration .1.3.6.1.4.1.89.4.1.1.14 |
rndIfBridgeThis variable indicates whether this interface forward Layer II pakages.rw Enumeration .1.3.6.1.4.1.89.4.1.1.15 |
rndHighPriorityIfThis variable indicates whether this interface will forward pakages
that fit HighPriority set by the manager.rw Enumeration .1.3.6.1.4.1.89.4.1.1.16 |
rndWanHeaderThis variable indicates the RND WAN header type used for frames
which pass through this interface. 'regular' specifies a 14 bytes
header compatible with older OG versions and 'short' a 4 byte header
compatible with the RND adapter product family.rw Enumeration .1.3.6.1.4.1.89.4.1.1.17 |
rndDuplexModeThis variable indicates whether this interface operates in half duplex
full duplex or auto negotiation mode.rw Enumeration .1.3.6.1.4.1.89.4.1.1.18 |
rndIPX OBJECT IDENTIFIER .1.3.6.1.4.1.89.12 |
rndFACS OBJECT IDENTIFIER .1.3.6.1.4.1.89.16 |
rndFACSDefaultActionUsed to define the default action for the device, when no
FACS statements applicable to a given frame are defined.rw Enumeration .1.3.6.1.4.1.89.16.1 |
rndFACSActTableThe table of FACS action. SEQUENCE OF RndFACSActEntry .1.3.6.1.4.1.89.16.2 |
rndFACSActEntryEach rndFACSActEntry consist of the following parameters RndFACSActEntry .1.3.6.1.4.1.89.16.2.1 |
rndFACSActTypeThis parameter indicate on which FACS Table the FACS
action will preform.ro Enumeration .1.3.6.1.4.1.89.16.2.1.1 |
rndFACSActIfIndexThe interface to which this FACS entry is applicable.ro INTEGER .1.3.6.1.4.1.89.16.2.1.2 |
rndFACSActionThe management station that sends a SET request for one of these actions
with indexes rndFACSType and rndFACSIfIndex defines the type and the
interface Id for which all FACS statements are to be erased.
If no interface or no type is specified, all FACS statements for a
protocol are erased.rw Enumeration .1.3.6.1.4.1.89.16.2.1.3 |
rndFACSTableThe table of FACS statment. SEQUENCE OF RndFACSEntry .1.3.6.1.4.1.89.16.3 |
rndFACSEntryEach FACS statment consist of the following parameters RndFACSEntry .1.3.6.1.4.1.89.16.3.1 |
rndFACSIfIndexThe interface to which this FACS entry is applicable.ro INTEGER .1.3.6.1.4.1.89.16.3.1.1 |
rndFACSProtocolTypeThis parameter define the protocol the Security Access Control
is applicable.ro Enumeration .1.3.6.1.4.1.89.16.3.1.2 |
rndFACSTypeThe Mode of in which this FACS statement operates.ro Enumeration .1.3.6.1.4.1.89.16.3.1.3 |
rndFACSIndexIndex to the FACS Table.ro INTEGER .1.3.6.1.4.1.89.16.3.1.4 |
rndFACSSrcAddThe size of the octet string will be according to the protocol type define in
rndFACSProtocolType.rw OCTET STRING .1.3.6.1.4.1.89.16.3.1.5 |
rndFACSSrcAddMaskSource-address mask .rw OCTET STRING .1.3.6.1.4.1.89.16.3.1.6 |
rndFACSDesAddDestination-address The size of the octet string will be according to the
protocol type define in rndFACSProtocolType .rw OCTET STRING .1.3.6.1.4.1.89.16.3.1.7 |
rndFACSDesAddMaskDestination-address mask .rw OCTET STRING .1.3.6.1.4.1.89.16.3.1.8 |
rndFACSOperation... .rw Enumeration .1.3.6.1.4.1.89.16.3.1.9 |
rndFACSNetFiltering... .rw Enumeration .1.3.6.1.4.1.89.16.3.1.10 |
rndFACSSoketNumPort/socket number for different applications
0 is default meaning not applicable.rw INTEGER -- {none(1), -- ftp(21), -- telenet(23), -- smtp(25), -- tftp(69), -- snmp(161), -- snmpTrape(162), -- rip(520), -- saPipx(1106), -- ripIPX(1107) -- } .1.3.6.1.4.1.89.16.3.1.11 |
rndFACSMask1IdIndex into RND mask table FACS/COD Type) .rw INTEGER .1.3.6.1.4.1.89.16.3.1.12 |
rndFACSMask2IdIndex into RND mask table FACS/COD according to
the value of rndFACSType .rw INTEGER .1.3.6.1.4.1.89.16.3.1.13 |
rndFACSStatusThe status of a table entry.rw Enumeration .1.3.6.1.4.1.89.16.3.1.14 |
rndBootP OBJECT IDENTIFIER .1.3.6.1.4.1.89.24 |
rndBootPServerAddressThe IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if
this parameter is not equale to 0.0.0.0.rw IpAddress .1.3.6.1.4.1.89.24.1 |
rndBootPRelaySecThresholdBootP requests are relayed only if their SEC field is greater or
equal to the threshold value in order to allow local BootP Servers
to answer first.rw INTEGER .1.3.6.1.4.1.89.24.2 |
ipSpec OBJECT IDENTIFIER .1.3.6.1.4.1.89.26 |
rsIpAddrTableThis table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects. SEQUENCE OF RsIpAddrEntry .1.3.6.1.4.1.89.26.1 |
rsIpAddrEntryThe addressing information for one of this
entity's IP addresses. RsIpAddrEntry .1.3.6.1.4.1.89.26.1.1 |
rsIpAdEntAddrThe IP address to which this entry's addressing
information pertains.ro IpAddress .1.3.6.1.4.1.89.26.1.1.1 |
rsIpAdEntIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.rw INTEGER .1.3.6.1.4.1.89.26.1.1.2 |
rsIpAdEntNetMaskThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.89.26.1.1.3 |
rsIpAdEntForwardIpBroadcastThis variable controls forwarding of IP (sub)net-directed
broadcasts destined for an attached sub(net).rw Enumeration .1.3.6.1.4.1.89.26.1.1.4 |
rsIpAdEntReasmMaxSizeThe size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagrams received on this interface.ro INTEGER .1.3.6.1.4.1.89.26.1.1.5 |
rsIpAdEntStatusThe validity of this entry. Invalid indicates that this entry is
invalid in IpAddrTable (MIB II).rw Enumeration .1.3.6.1.4.1.89.26.1.1.6 |
rsIpAdEntBcastAddrIndicates how the host part of ip subnet broadcast messages will be
filled:
0 - host part will be filled by 0
1 - host part will be filled by 1.rw INTEGER .1.3.6.1.4.1.89.26.1.1.7 |
rsIpAdEntVlanTagThe vlan Tag value that represent this ip interface
this filed include both vlna tag and vlan priorityrw INTEGER .1.3.6.1.4.1.89.26.1.1.8 |
icmpSpec OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.2 |
rsIcmpGenErrMsgEnableThis variable controlls the ability to generate ICMP error messagesrw Enumeration .1.3.6.1.4.1.89.26.2.1 |
rsIcmpRdTableThis table contains ICMP Router Discovery parameters
configurated per IP interface. SEQUENCE OF RsIcmpRdEntry .1.3.6.1.4.1.89.26.2.2 |
rsIcmpRdEntryThe ICMP parameters configurated for IP interface. RsIcmpRdEntry .1.3.6.1.4.1.89.26.2.2.1 |
rsIcmpRdIpAddrThe IP address to which this entry's information pertains.ro IpAddress .1.3.6.1.4.1.89.26.2.2.1.1 |
rsIcmpRdIpAdvertAddrThe IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255.255.255.rw IpAddress .1.3.6.1.4.1.89.26.2.2.1.2 |
rsIcmpRdMaxAdvertIntervalThe maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.
Must be no less than 4 seconds and no greater than 1800
seconds.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.3 |
rsIcmpRdMinAdvertIntervalThe minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no less than 3 seconds and no greater
than rsIcmpRdMaxAdvertInterval.
Default: 0.75 * rsIcmpRdMaxAdvertInterval.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.4 |
rsIcmpRdAdvertLifetimeThe maximum length of time that the advertised addresses
are to be considered as valid. Must be no less than
rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds.
Default: 3 * rsIcmpRdMaxAdvertInterval.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.5 |
rsIcmpRdAdvertiseA flag indicating whether or not the address is to be
advertised.rw Enumeration .1.3.6.1.4.1.89.26.2.2.1.6 |
rsIcmpRdPreferenceLevelThe preferability of the address as a default router
address, relative to other router addresses on the same
subnet.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.7 |
rsIcmpRdEntStatusSetting of any value to this object set values of
all fields to the default values.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.8 |
rip2Spec OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.3 |
rsRip2IfConfTableThis table is extension of rip2IfConfTable (RFC 1389 ,RIP 2) SEQUENCE OF RsRip2IfConfEntry .1.3.6.1.4.1.89.26.3.1 |
rsRip2IfConfEntry RsRip2IfConfEntry .1.3.6.1.4.1.89.26.3.1.1 |
rsRip2IfConfAddressThe IP Address of this system on the indicated subnet.ro IpAddress .1.3.6.1.4.1.89.26.3.1.1.1 |
rsRip2IfConfVirtualDisThis variable defines the virtual number of hops assigned to
the interface specified by rsIfIpAddrIndex. This enables
fine-tuning of the RIP routing algorithm.rw INTEGER .1.3.6.1.4.1.89.26.3.1.1.2 |
rsRip2IfConfAutoSendThis variable controls RIP automatic send behavior. If enabled
and no routers were heard on the interface, RIP will only send
default route with high metric. Otherwise RIP will send updates
according to configuration.rw Enumeration .1.3.6.1.4.1.89.26.3.1.1.3 |
arpSpec OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.4 |
rsArpDeleteTableSetting this object to any not-null value has the effect of deleting
all entries of the ARP table.rw INTEGER .1.3.6.1.4.1.89.26.4.1 |
rsArpInactiveTimeOutThis variable defines the maximum time period (in second) that can
pass between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table.rw INTEGER .1.3.6.1.4.1.89.26.4.2 |
rsArpProxyWhen ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on a different sub-net,
provided they are it its network table. The router responds
with its own MAC address.
When ARP Proxy is disabled, the router responds only
to ARP requests for its own IP addresses.rw Enumeration .1.3.6.1.4.1.89.26.4.3 |
tftp OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.5 |
rsTftpRetryTimeOutGeneral Retransmission time-out value (seconds)rw INTEGER .1.3.6.1.4.1.89.26.5.1 |
rsTftpTotalTimeOutTotal Retransmission time-out value (seconds)rw INTEGER .1.3.6.1.4.1.89.26.5.2 |
rsSendConfigFileThe file name include path where the Router Server will put the full
configuration. The default destination address will be the sender
address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.26.5.3 |
rsGetConfigFileThe file name include path where the Router Server will get the
configuration. The default source address will be the sender address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.26.5.4 |
rsLoadSoftwareThe file name include path where the Router Server will get the
software. The source address will the sender address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.26.5.5 |
rsFileServerAddressThe IP address of the configuration / sw server.rw IpAddress .1.3.6.1.4.1.89.26.5.6 |
ipRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.6 |
ipRedundAdminStatusThis variable controls the IP Redundancy method in the device.
In case the value is enable, it means the ARP redundancy mechanism
is running .If the value is vrrp, it means the former redundancy
mechanism is disabled, and the vrrp mechanism is enabled.
If the value is disable, both redundancy methods are disabledrw Enumeration .1.3.6.1.4.1.89.26.6.1 |
ipRedundOperStatusobsoletero Enumeration .1.3.6.1.4.1.89.26.6.2 |
ipRedundRoutersTableList of IP addresses backed up by this router. SEQUENCE OF IpRedundRoutersEntry .1.3.6.1.4.1.89.26.6.3 |
ipRedundRoutersEntryThe row definition for this table. IpRedundRoutersEntry .1.3.6.1.4.1.89.26.6.3.1 |
ipRedundRoutersIfAddrThe Ip address of the IP interface on which the redundancy feature
is operational.ro IpAddress .1.3.6.1.4.1.89.26.6.3.1.1 |
ipRedundRoutersMainRouterAddrThe Ip address of the polled main router.ro IpAddress .1.3.6.1.4.1.89.26.6.3.1.2 |
ipRedundRoutersOperStatusIf active, the main router is considered inoperational and the IP
interface operates as its backup.ro Enumeration .1.3.6.1.4.1.89.26.6.3.1.3 |
ipRedundRoutersPollIntervalPolling interval for this router (in seconds). If 0 the router is not
polled.rw INTEGER .1.3.6.1.4.1.89.26.6.3.1.4 |
ipRedundRoutersTimeoutInterval in seconds during which the backed-up router must signal.
If it does not signal, it is considered inoperational and the IP
interface starts operating as backup.rw INTEGER .1.3.6.1.4.1.89.26.6.3.1.5 |
ipRedundRoutersStatusEntry statusrw Enumeration .1.3.6.1.4.1.89.26.6.3.1.6 |
ipRouteLeaking OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.7 |
ipLeakStaticToRipThis parameter controls leaking (redistribution) of static routes
to RIP. When enabled, all routes inserted to the IP routing table
via SNMP are advertised into RIP.rw Enumeration .1.3.6.1.4.1.89.26.7.1 |
ipLeakStaticToOspfThis parameter controls leaking (redistribution) of static routes
into OSPF. When enabled, all routes inserted to the IP routing table
via SNMP are advertised into OSPF as external routes.rw Enumeration .1.3.6.1.4.1.89.26.7.2 |
ipLeakOspfToRipThis parameter controls leaking (redistribution) of routes
from OSPF to RIP. If enabled, all routes learned via OSPF
are advertised into RIP.rw Enumeration .1.3.6.1.4.1.89.26.7.3 |
ipLeakRipToOspfThis parameter controls leaking (redistribution) of routes
from RIP to OSPF. If enabled, all routes learned via RIP
are advertised into OSPF as external routes.rw Enumeration .1.3.6.1.4.1.89.26.7.4 |
ipLeakExtDirectToOspfThis parameter controls leaking (redistribution) into OSPF of
direct routes external to OSPF, i.e. routes to local network
corresponding to IP interfaces on which OSPF is disabled.
When enabled, all such direct routes are advertised into OSPF
as external routes.rw Enumeration .1.3.6.1.4.1.89.26.7.5 |
ipRipFilter OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.8 |
rsIpRipFilterGlbTableThe table of RIP global filters per IP router. SEQUENCE OF RsIpRipFilterGlbEntry .1.3.6.1.4.1.89.26.8.1 |
rsIpRipFilterGlbEntryAn entry in the RIP global filter table RsIpRipFilterGlbEntry .1.3.6.1.4.1.89.26.8.1.1 |
rsIpRipFilterGlbTypeType of filter - input/outputro Enumeration .1.3.6.1.4.1.89.26.8.1.1.1 |
rsIpRipFilterGlbNumberNumber of RIP filter.ro INTEGER .1.3.6.1.4.1.89.26.8.1.1.2 |
rsIpRipFilterGlbStatusThe validity of this entry. Setting this value to invalid deletes
the entry, and the entry may be actualy removed from the table.rw Enumeration .1.3.6.1.4.1.89.26.8.1.1.3 |
rsIpRipFilterGlbIpAddrnetwork prefix IP address, as in the forwarding table.rw IpAddress .1.3.6.1.4.1.89.26.8.1.1.4 |
rsIpRipFilterGlbNetworkMaskBitsthe number of bits in the IP Network mask, called network-prefix-length
in Router Requirements terminology. for example: the value 16 means
mask 255.255.0.0rw INTEGER .1.3.6.1.4.1.89.26.8.1.1.5 |
rsIpRipFilterGlbMatchBitsthe number of bits to match in the Network IP address. A value
smaller than 32 defines a wildcard. for example: the value 8 means
all routes whose leftmost 8 bits are equal to those of the network IP
address. If this variable has a value other than 32, than
rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.rw INTEGER .1.3.6.1.4.1.89.26.8.1.1.6 |
rsIpRipFilterGlbActionFilter action - permit/deny for this networkrw Enumeration .1.3.6.1.4.1.89.26.8.1.1.7 |
rsIpRipFilterLclTableTable of input/output RIP filters used per IP Interface. SEQUENCE OF RsIpRipFilterLclEntry .1.3.6.1.4.1.89.26.8.2 |
rsIpRipFilterLclEntryAn entry in the Intf RIP filter table RsIpRipFilterLclEntry .1.3.6.1.4.1.89.26.8.2.1 |
rsIpRipFilterLclIpIntfThe IP address identifying the RIP interface for this filter.
This value corresponds to rsIpAdEntAddr.ro IpAddress .1.3.6.1.4.1.89.26.8.2.1.1 |
rsIpRipFilterLclTypeType of filter - input/outputro Enumeration .1.3.6.1.4.1.89.26.8.2.1.2 |
rsIpRipFilterLclNumberNumber of RIP filter for this Interfacero INTEGER .1.3.6.1.4.1.89.26.8.2.1.3 |
rsIpRipFilterLclStatusThe validity of this entry. Setting this value to invalid deletes
the entry, and the entry may be actualy removed from the table.rw Enumeration .1.3.6.1.4.1.89.26.8.2.1.4 |
rsIpRipFilterLclIpAddrnetwork prefix IP address, as in the forwarding table.rw IpAddress .1.3.6.1.4.1.89.26.8.2.1.5 |
rsIpRipFilterLclNetworkMaskBitsthe number of bits in the IP Network mask, called network-prefix-length
in Router Requirements terminology. for example: the value 16 means
mask 255.255.0.0rw INTEGER .1.3.6.1.4.1.89.26.8.2.1.6 |
rsIpRipFilterLclMatchBitsthe number of bits to match in the Network IP address. A value
smaller than 32 defines a wildcard. for example: the value 8 means
all routes whose leftmost 8 bits are equal to those of the network IP
address. If this variable has a value other than 32, than
rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored.rw INTEGER .1.3.6.1.4.1.89.26.8.2.1.7 |
rsIpRipFilterLclActionFilter action - permit/denyrw Enumeration .1.3.6.1.4.1.89.26.8.2.1.8 |
rsRipEnableEnables or disables RIP.rw Enumeration .1.3.6.1.4.1.89.26.9 |
lreBoxAgentIPrw IpAddress .1.3.6.1.4.1.89.26.10 |
virtualLan OBJECT IDENTIFIER .1.3.6.1.4.1.89.27 |
virtualLanTableAn entry of this table specifies an new ifIndex with a type of
propVirtual(53). SEQUENCE OF VirtualLanEntry .1.3.6.1.4.1.89.27.1 |
virtualLanEntryA list of information for each virtual LAN. VirtualLanEntry .1.3.6.1.4.1.89.27.1.1 |
vlIfIndexAn logical interface number, corresponded this VLrw INTEGER .1.3.6.1.4.1.89.27.1.1.1 |
vlProtoThe protocol, supported by this VL. The meanings of the values are:
other: none of the following. This VL includes any protocol except the
following protocols. It is a bridging VL. RS relies on
a third-party router to exchange traffic between nodes on different
virtual LANs of this type.
IP: This is a routing VL, RS will route between nodes on
different virtual LANs.
IPmulticast: RS will broadcast the message to all the VL's ports. Used for
video-conferencing applications.
ipxRaw: This is a Routing VL, RS will route between nodes on
different virtual LANs.
ipxET: This is a routing VL, RS will route between nodes on
different virtual LANs.
ipxLLC: This is a routing VL, RS will route between nodes on
different virtual LANs.
ipxSNAP: This is a routing VL, RS will route between nodes on
different virtual LANs.
decNET: This is a bridging VL, RS relies on a third-party router
to exchange traffic between nodes on different DECnet virtual
LANs of this type.
netBios: This is a Bridging VL, RS relies on a third-party router
to exchange traffic between nodes on different NetBIOS virtual
LANs of this type.
appleTalk: This is a bridging VL, RS relies on a third-party router
to exchange traffic between nodes on different AppleTalk virtual
LANs of this type.rw Enumeration .1.3.6.1.4.1.89.27.1.1.2 |
vlAutoConfigEnableIt is used only in the case of IP. The meanings of the values are:
true(1): Autolearning is used for this VL
false(2): Autolearning isn't used for this VL from ports, specified in
the table virtualLanAutoConfTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.27.1.1.3 |
vlStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.27.1.1.4 |
vlTyperegular - ordinary type
specBroadcast - for switches that support VLANs as a set of ports and
only as a broadcast domain: broadcast frames do not
cross VLAN's bounders, but unicast frames may be
transmitted between different VLANs. Permits passing
of broadcast frames between Vgate's VLANs.
specArpReq - for switches that support VLANs as a set of ports and
only as a broadcast domain: broadcast frames do not
cross VLAN's bounders, but unicast frames may be
transmitted between different VLANs. Permits passing
of ARP request frames between Vgate's VLANs.
specBroadcastAndUnicast -
for switches that support VLANs as a set of ports
but no frame crosses VLAN's bounders. Permits passing
of IP/ARP request broadcast and IP unicast frames
between Vgate's VLANs.
specArpReqAndUnicast -
for switches that support VLANs as a set of ports
but no frame crosses VLAN's bounders. Permits passing
of ARP request broadcast and IP unicast frames between
Vgate's VLANs. This type can be used only for IP VLANs.rw Enumeration .1.3.6.1.4.1.89.27.1.1.5 |
virtualLanPortsTableFor each VL (a ifIndex with a type of propVirtual(53)) an entry of this
table specifies a set of ports, which it contains. SEQUENCE OF VirtualLanPortEntry .1.3.6.1.4.1.89.27.2 |
virtualLanPortEntryA entry of this table specifies a VL and a port belonging to it VirtualLanPortEntry .1.3.6.1.4.1.89.27.2.1 |
vLIfIndexAn logical interface number, corresponding to this VLrw INTEGER .1.3.6.1.4.1.89.27.2.1.1 |
vLPortIfIndexA physical port belonging to the VL specified by vlIfIndex.rw INTEGER .1.3.6.1.4.1.89.27.2.1.2 |
vLPortTypestatic means configured by user dynamic means autoconfigured by the RSro Enumeration .1.3.6.1.4.1.89.27.2.1.3 |
vLPortStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.27.2.1.4 |
virtualLanAutoConfTableThis table specifies per a routing protocol a set of ports, from which
RS will automatically learning VL in accordance with rules, defined
by the protocol. SEQUENCE OF VirtualLanAutoConfEntry .1.3.6.1.4.1.89.27.3 |
virtualLanAutoConfEntryOne port, specified by vlAutoConfPortIfIndex, for which the RS will
automatically learn its VL in accordance with rules, defined
by the protocol specified in vlAutoConfProto. VirtualLanAutoConfEntry .1.3.6.1.4.1.89.27.3.1 |
vlAutoConfPortIfIndexPort on which the autoconfig option should be supportedrw INTEGER .1.3.6.1.4.1.89.27.3.1.1 |
vlAutoConfProtoProtocol for which the autoconfig option is supported for the port
specified by vlAutoConfPortIfIndexro Enumeration .1.3.6.1.4.1.89.27.3.1.2 |
vlAutoConfStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.27.3.1.3 |
virtualLanAutoConfAgingTimeoutThe units of this MIB object is seconds.
Its value can be either 0 or in range 10..65535 .rw INTEGER .1.3.6.1.4.1.89.27.4 |
virtualLanProtocolVlan OBJECT IDENTIFIER .1.3.6.1.4.1.89.27.5 |
virtualLanUserEtherTyperw OCTET STRING .1.3.6.1.4.1.89.27.5.1 |
virtualLanUserMaskrw OCTET STRING .1.3.6.1.4.1.89.27.5.2 |
rsConf OBJECT IDENTIFIER .1.3.6.1.4.1.89.28 |
rsIfConfTableThis table enable the user to add interface to the RS.
RS will automatically add the new interface to the interface Table SEQUENCE OF RsIfConfEntry .1.3.6.1.4.1.89.28.1 |
rsIfConfEntryEach entry defines a configured interface. RsIfConfEntry .1.3.6.1.4.1.89.28.1.1 |
rsIfConfIndexThis variable uniquely identifies the interface.
It is used as a cross reference in other system tablesro INTEGER .1.3.6.1.4.1.89.28.1.1.1 |
rsIfConfTypeThis variable identifies the type of the specific
entry in the rsIfConfTable.
This field is writable only at creation time
(i.e., when value of status is underCreation).rw RsIfType .1.3.6.1.4.1.89.28.1.1.2 |
rsIfConfNameThis variable provides a logical name to a specific entry in
rsIfConfTablerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.28.1.1.3 |
rsIfConfStatusThe status of the ConfigEntry. The choices are those
defined in SNMPv2-TC. Only: active, createAndWait, and destroy
will be used.
active - The conceptual row is available for use by the managed device.
createAndWait - A new instance of a conceptual row is desired, but
not to have it available for use by the managed device.
destroy - Delete all instances associated with an existing conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.28.1.1.4 |
rsTunning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29 |
rsHighPriorityThis variable indicates the time interval the forwarding task inside the
RS works in High Priority Mode.rw INTEGER .1.3.6.1.4.1.89.29.1 |
rsLowPriorityThis variable indicates the time interval the forwarding task inside the
RS works in Low Priority Mode.rw INTEGER .1.3.6.1.4.1.89.29.2 |
rsDbgLevelThis variable indicates the debug level the Router Server works.
the range of this variable is 1..100rw INTEGER .1.3.6.1.4.1.89.29.3 |
rsDiagnosticThis variable will contain some dignostic information in case on a
problem ocurs in the RS functinality.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.29.4 |
rsConfirmMessagTabThis variable enables the operator to confirm all the message in the
event Message Table.rw INTEGER .1.3.6.1.4.1.89.29.5 |
eventMessageTableThe Event Message table of the agent SEQUENCE OF EventMessageEntry .1.3.6.1.4.1.89.29.6 |
eventMessageEntryThe row definition for this table. EventMessageEntry .1.3.6.1.4.1.89.29.6.1 |
eventNumThe event number,the index of this table.ro INTEGER .1.3.6.1.4.1.89.29.6.1.1 |
eventDescThe event discription, this text will include time and severity.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.29.6.1.2 |
reaTunning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.7 |
reaIpRemoteAgingTimeThis variable specifies aging time used by the REA for remote
entries in the Ip Fast Forwarding Table.rw INTEGER .1.3.6.1.4.1.89.29.7.1 |
reaFftHashMaxChainThis variable specifies the maximum length of hash chains in
the Fast Forwarding Tables.rw INTEGER .1.3.6.1.4.1.89.29.7.2 |
reaMltcstBitOnrw Enumeration .1.3.6.1.4.1.89.29.7.3 |
reaIpForwardEnableThe Platform will perform fast IP forwarding if only if this
variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.4 |
reaIpxForwardEnableThe Platform will perform fast IPX forwarding if only if this
variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.5 |
reaBridgeEnableThe Platform will perform bridging if only if this
variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.6 |
reaFacsEnableThe RS and Platform will perform FASC if only if this
variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.7 |
reaIpForwardDatagramsThe number of IP datagrams have been forwarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.8 |
reaIpInDiscardsThe number of IP datagrams have been dicarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.9 |
reaIpxForwardDatagramsThe number of IPX datagrams have been forwarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.10 |
reaIpxInDiscardsThe number of IP datagrams have been dicarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.11 |
reaBridgeFftTableThe Bridge Fast Forwarding Table SEQUENCE OF ReaBridgeFftEntry .1.3.6.1.4.1.89.29.7.12 |
reaBridgeFftEntryThe row definition for this table. ReaBridgeFftEntry .1.3.6.1.4.1.89.29.7.12.1 |
reaBrgFftEntryNumro INTEGER .1.3.6.1.4.1.89.29.7.12.1.1 |
reaBrgFftMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.12.1.2 |
reaBrgFftReNumro INTEGER .1.3.6.1.4.1.89.29.7.12.1.3 |
reaBrgFftPortNumro INTEGER .1.3.6.1.4.1.89.29.7.12.1.4 |
reaBrgFftFacsSrcIndexro INTEGER .1.3.6.1.4.1.89.29.7.12.1.5 |
reaBrgFftFacsDstIndexro INTEGER .1.3.6.1.4.1.89.29.7.12.1.6 |
reaBrgDiscardsThe number of bridging datagrams have been discarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.13 |
reaBrgForwardsThe number of bridging datagrams have been forwarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.14 |
reaIpFftTableThe IP Fast Forwarding Table SEQUENCE OF ReaIpFftEntry .1.3.6.1.4.1.89.29.7.15 |
reaIpFftEntryThe row definition for this table. ReaIpFftEntry .1.3.6.1.4.1.89.29.7.15.1 |
reaIpFftEntryNumro INTEGER .1.3.6.1.4.1.89.29.7.15.1.1 |
reaIpFftDstIpAddrro IpAddress .1.3.6.1.4.1.89.29.7.15.1.2 |
reaIpFftDstIpMaskro IpAddress .1.3.6.1.4.1.89.29.7.15.1.3 |
reaIpFftRangeTypero Enumeration .1.3.6.1.4.1.89.29.7.15.1.4 |
reaIpFftSrcMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.15.1.5 |
reaIpFftDstMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.15.1.6 |
reaIpFftReNumro INTEGER .1.3.6.1.4.1.89.29.7.15.1.7 |
reaIpFftPortNumro INTEGER .1.3.6.1.4.1.89.29.7.15.1.8 |
reaIpFftFacsSrcIndexro INTEGER .1.3.6.1.4.1.89.29.7.15.1.9 |
reaIpFftFacsDstIndexro INTEGER .1.3.6.1.4.1.89.29.7.15.1.10 |
reaIpFftApplFlagsA bit mask that defines the applications associated with this entry:
__________________________________________
| Byte 1|Byte 2 |Byte 3 | ....|Byte 20 |
|87654321| | 87654321|
|________|_______________________________|
Byte1 :
bit1: Server Dispatcher Clientro OCTET STRING .1.3.6.1.4.1.89.29.7.15.1.11 |
reaIpxFftTableThe IPX Fast Forwarding Table SEQUENCE OF ReaIpxFftEntry .1.3.6.1.4.1.89.29.7.16 |
reaIpxFftEntryThe row definition for this table. ReaIpxFftEntry .1.3.6.1.4.1.89.29.7.16.1 |
reaIpxFftEntryNumro INTEGER .1.3.6.1.4.1.89.29.7.16.1.1 |
reaIpxFftDstNetidro INTEGER .1.3.6.1.4.1.89.29.7.16.1.2 |
reaIpxFftRangeTypero Enumeration .1.3.6.1.4.1.89.29.7.16.1.3 |
reaIpxFftSrcMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.16.1.4 |
reaIpxFftDstMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.16.1.5 |
reaIpxFftReNumro INTEGER .1.3.6.1.4.1.89.29.7.16.1.6 |
reaIpxFftPortNumro INTEGER .1.3.6.1.4.1.89.29.7.16.1.7 |
reaIpxFftFacsSrcIndexro INTEGER .1.3.6.1.4.1.89.29.7.16.1.8 |
reaIpxFftFacsDstIndexro INTEGER .1.3.6.1.4.1.89.29.7.16.1.9 |
lreVnResposibilityTableThe Bridge Responsibility Table SEQUENCE OF LreVnResposibilityEntry .1.3.6.1.4.1.89.29.7.17 |
lreVnResposibilityEntryThe row definition for this table. LreVnResposibilityEntry .1.3.6.1.4.1.89.29.7.17.1 |
lreVnRespVnrw INTEGER .1.3.6.1.4.1.89.29.7.17.1.1 |
lreVnRespStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.17.1.2 |
reaSrcViolationEnableThe Platform will perform the Source Port Violation Procedure
if only if this variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.18 |
reaSrcViolationTrapEnableThe RS will send the Source Port Violation TRAP messages
if only if this variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.19 |
reaSrcAddrValidationEnableThe Platform will verify the source address of incoming
IP datagram.rw Enumeration .1.3.6.1.4.1.89.29.7.20 |
reaRsQueueDiscardsro Counter .1.3.6.1.4.1.89.29.7.21 |
reaBufFreeThe number of free buffers.ro INTEGER .1.3.6.1.4.1.89.29.7.22 |
lreResetDstMacBit46rw Enumeration .1.3.6.1.4.1.89.29.7.23 |
lreQueSourceSelectrw Enumeration .1.3.6.1.4.1.89.29.7.24 |
lreResetDstMacBit47rw Enumeration .1.3.6.1.4.1.89.29.7.25 |
rsMaxEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8 |
rsMaxBridgeForwardingEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.1 |
rsMaxBrgFrwEntriesMaximal number of entries in bridge forwarding table.ro INTEGER .1.3.6.1.4.1.89.29.8.1.1 |
rsMaxBrgFrwEntriesAfterResetFuture maximal number of entries in bridge forwarding table.rw INTEGER .1.3.6.1.4.1.89.29.8.1.2 |
rsMaxIpForwardingEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.2 |
rsMaxIpFrwEntriesMaximal number of entries in Ip forwarding table.ro INTEGER .1.3.6.1.4.1.89.29.8.2.1 |
rsMaxIpFrwEntriesAfterResetFuture maximal number of entries in Ip forwarding table.rw INTEGER .1.3.6.1.4.1.89.29.8.2.2 |
rsMaxArpEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.3 |
rsMaxArpEntriesMaximal number of entries in Arp forwarding table.ro INTEGER .1.3.6.1.4.1.89.29.8.3.1 |
rsMaxArpEntriesAfterResetFuture maximal number of entries in Arp forwarding table.rw INTEGER .1.3.6.1.4.1.89.29.8.3.2 |
rsMaxIpxForwardingEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.4 |
rsMaxIpxFrwEntriesMaximal number of entries in Ipx forwarding table.ro INTEGER .1.3.6.1.4.1.89.29.8.4.1 |
rsMaxIpxFrwEntriesAfterResetFuture maximal number of entries in Ipx forwarding table.rw INTEGER .1.3.6.1.4.1.89.29.8.4.2 |
rsMaxIpxSapEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.5 |
rsMaxIpxSapEntriesMaximal number of entries in IpxSap table.ro INTEGER .1.3.6.1.4.1.89.29.8.5.1 |
rsMaxIpxSapEntriesAfterResetFuture maximal number of entries in IpxSap table.rw INTEGER .1.3.6.1.4.1.89.29.8.5.2 |
rsMaxDspClntEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.6 |
rsMaxDspClntEntriesMaximal number of entries in rsSdClientsTable.ro INTEGER .1.3.6.1.4.1.89.29.8.6.1 |
rsMaxDspClntEntriesAfterResetFuture maximal number of entries in rsSdClientsTable.rw INTEGER .1.3.6.1.4.1.89.29.8.6.2 |
rsMaxZeroHopRoutEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.7 |
rsMaxZhrConnsThe current maximal number of direct Zero-hop routing
connections.ro INTEGER .1.3.6.1.4.1.89.29.8.7.1 |
rsMaxZhrConnsAfterResetThe future (after reset) maximal number of direct Zero-hop routing
connections.rw INTEGER .1.3.6.1.4.1.89.29.8.7.2 |
rsMaxDspFrmEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.8 |
rsMaxDspFrmEntriesMaximal number of entries in rsSdClientsTable.ro INTEGER .1.3.6.1.4.1.89.29.8.8.1 |
rsMaxDspFrmEntriesAfterResetFuture maximal number of entries in rsSdClientsTable.rw INTEGER .1.3.6.1.4.1.89.29.8.8.2 |
rsMaxRoutingEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.9 |
rsMaxRoutingEntriesMaximal number of entries in the routing table.ro INTEGER .1.3.6.1.4.1.89.29.8.9.1 |
rsMaxRoutingEntriesAfterResetFuture maximal number of entries in the routing table.rw INTEGER .1.3.6.1.4.1.89.29.8.9.2 |
rndApplications OBJECT IDENTIFIER .1.3.6.1.4.1.89.35 |
rsServerDispatcher OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1 |
rsWSDConnectionLimitReachedThis warning is generated when the users connection limit of an application or a physical server is reached. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.1 |
rsWSDReadyForShutDownThis warning is generated when all the clients sessions of an application or a physical server are finished and so, the application or server are ready to be shut down. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.2 |
rsWSDIllegalReportThis warning is generated when an LRP message arrives with illegal information. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.3 |
rsWSDRemoteWSDUnavailableThis warning is generated when a remote WSD is in full capacity, not in service or disabled. This server is then unavailable TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.4 |
rsWSDCapacityLimitReachedThis warning is generated when WSD capacity limit is reached. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.5 |
rsWSDStatusMonitoringThis warning is generated for unavailable SNMP parameter from a server. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.6 |
rsWSDWrongPasswordThis warning is generated when a wrong software download password is provided. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.7 |
rsWSDInternalTableOverflowThis warning is generated when there are no more free entries in the table. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.8 |
rsWSDServerUpThis informational trap is sent when a server correctly responds to a connectivity check for the first time. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.9 |
rsWSDPoliciesUpdatedThis informational trap is sent when the rule policies are
updated. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.10 |
rsWSDIntrusionDetectedThis informational trap is sent when an intrusion is detected. TRAP-TYPE .1.3.6.1.4.1.89.35.1.0.11 |
rsWSDServerStatTableIn this table the WSD collects statistics per servers. SEQUENCE OF RsWSDServerStatEntry .1.3.6.1.4.1.89.35.1.12 |
rsWSDServerStatEntryThe row definition for this table. RsWSDServerStatEntry .1.3.6.1.4.1.89.35.1.12.1 |
rsWSDSerStatNameThis variable indicate the name assigned by the user to the serve.ro DisplayString .1.3.6.1.4.1.89.35.1.12.1.1 |
rsWSDSerStatAttUsersNumThe total number of currently active users attached to this server.ro INTEGER .1.3.6.1.4.1.89.35.1.12.1.2 |
rsWSDSerStatPeakLoadMaximal number of frames per second dispatched to server
since last reset.ro INTEGER .1.3.6.1.4.1.89.35.1.12.1.3 |
rsWSDSerStatFramesRateNumber of frames per second dispatched to server.ro INTEGER .1.3.6.1.4.1.89.35.1.12.1.4 |
rsWSDSerStatFramesLoadNumber of frames per second dispatched to server.ro Counter .1.3.6.1.4.1.89.35.1.12.1.5 |
rsWSDSerStatRecoveryTimeNumber of seconds after server initialization during which ISD won't
send any requests.rw INTEGER .1.3.6.1.4.1.89.35.1.12.1.6 |
rsWSDSerStatWarmUpTimeNumber of seconds after server recovery during which the server will get
less requests than permitted by his weight and load.rw INTEGER .1.3.6.1.4.1.89.35.1.12.1.7 |
rsWSDSerStatConnectionLimitThe maximal number of client sessions which can be opened on this sever.rw INTEGER .1.3.6.1.4.1.89.35.1.12.1.8 |
rsWSDSerStatAdminStatusEnable / Shutdown all the applications on this physical server.rw Enumeration .1.3.6.1.4.1.89.35.1.12.1.9 |
rsWSDSerStatConnectionLimitReachedConnection limit reached flag.ro INTEGER .1.3.6.1.4.1.89.35.1.12.1.10 |
rsWSDdummy2Dummy variable for stopping getnext.ro INTEGER .1.3.6.1.4.1.89.35.1.12.2 |
wsdRedundTableList of Farm IP addresses backed up by this router. SEQUENCE OF WsdRedundEntry .1.3.6.1.4.1.89.35.1.16 |
wsdRedundEntryThe row definition for this table. WsdRedundEntry .1.3.6.1.4.1.89.35.1.16.1 |
wsdRedundFarmAddrThe Farm Virtual Ip address on which the redundancy feature operates.ro IpAddress .1.3.6.1.4.1.89.35.1.16.1.1 |
wsdRedundMainWsdAddrThe Ip address of the polled main wsd.ro IpAddress .1.3.6.1.4.1.89.35.1.16.1.2 |
wsdRedundOperStatusIf active, the main wsd is considered inactive and the IP interface operates as its backup.ro Enumeration .1.3.6.1.4.1.89.35.1.16.1.3 |
wsdRedundPollIntervalPolling interval for the main wsd (in seconds). If 0 the wsd is not
polled.rw INTEGER .1.3.6.1.4.1.89.35.1.16.1.4 |
wsdRedundTimeoutInterval in seconds during which the backed-up wsd must signal.
If it does not signal, it is considered inactive and the IP
interface starts operating as backup.rw INTEGER .1.3.6.1.4.1.89.35.1.16.1.5 |
wsdRedundStatusEntry statusrw Enumeration .1.3.6.1.4.1.89.35.1.16.1.6 |
rsWSDdummy5Dummy variable for stopping getnext.ro INTEGER .1.3.6.1.4.1.89.35.1.16.2 |
rsWSDNewEntryOnSourcePortCheck source port and if different open new client entry.rw Enumeration .1.3.6.1.4.1.89.35.1.19 |
rsWSDSelectServerOnSourcePortCheck source port and if different select a new server.rw Enumeration .1.3.6.1.4.1.89.35.1.20 |
rsWSDRedundancyModeDose some WSD backup me.rw Enumeration .1.3.6.1.4.1.89.35.1.21 |
rsNsdModeThe Topology chosen for the NSD.
Slow mode keeps the servers behind the NSD.
Fast mode uses retargeting to connect clients directly
to servers.rw Enumeration .1.3.6.1.4.1.89.35.1.22 |
rsNsdWINSAddrNetBIOS Name Server IP Address.rw IpAddress .1.3.6.1.4.1.89.35.1.23 |
rsWSDSyslogStatusEnable/Disable syslog message sending to remote station.rw Enumeration .1.3.6.1.4.1.89.35.1.26 |
rsWSDSyslogAddressThe IP Address of the syslog station.rw IpAddress .1.3.6.1.4.1.89.35.1.27 |
rsWSDNTCheckTableIn this table the WSD collects NT statistics per servers. SEQUENCE OF RsWSDNTCheckEntry .1.3.6.1.4.1.89.35.1.28 |
rsWSDNTCheckEntryThe row definition for this table. RsWSDNTCheckEntry .1.3.6.1.4.1.89.35.1.28.1 |
rsWSDNTSerialNumThe serial number of the algorithm.ro INTEGER .1.3.6.1.4.1.89.35.1.28.1.1 |
rsWSDNTFrequentCheckPeriodThe period for getting the frequent NT variables.rw INTEGER .1.3.6.1.4.1.89.35.1.28.1.2 |
rsWSDNTOpenSessionsWeightThe weight for currently open sessions consideration.rw INTEGER .1.3.6.1.4.1.89.35.1.28.1.3 |
rsWSDNTIncomingTrafficWeightThe weight for incoming traffic consideration.rw INTEGER .1.3.6.1.4.1.89.35.1.28.1.4 |
rsWSDNTOutgoingTrafficWeightThe weight for outgoing traffic consideration.rw INTEGER .1.3.6.1.4.1.89.35.1.28.1.5 |
rsWSDNTRegularCheckPeriodThe period for getting the regular NT variables.rw INTEGER .1.3.6.1.4.1.89.35.1.28.1.6 |
rsWSDNTAvResponseWeightThe weight for average response time.rw INTEGER .1.3.6.1.4.1.89.35.1.28.1.7 |
rsWSDNTUsersLimitWeightThe weight for the users limit on the server.rw INTEGER .1.3.6.1.4.1.89.35.1.28.1.8 |
rsWSDNTTCPLimitWeightThe weight for the TCP connections limit on the server.rw INTEGER .1.3.6.1.4.1.89.35.1.28.1.9 |
rsWSDNTRetriesThe number of retries before issuing a trap.rw INTEGER .1.3.6.1.4.1.89.35.1.28.1.10 |
rsWSDNTCommunityThe SNMP community name with which we access the servers.rw DisplayString .1.3.6.1.4.1.89.35.1.28.1.11 |
rsWSDdummy8Dummy variable for stopping getnext.ro INTEGER .1.3.6.1.4.1.89.35.1.28.2 |
rsWSDPrivateCheckTableIn this table the WSD collects private statistics per server. SEQUENCE OF RsWSDPrivateCheckEntry .1.3.6.1.4.1.89.35.1.29 |
rsWSDPrivateCheckEntryThe row definition for this table. RsWSDPrivateCheckEntry .1.3.6.1.4.1.89.35.1.29.1 |
rsWSDPrivateSerialNumThe serial number of the algorithm.ro INTEGER .1.3.6.1.4.1.89.35.1.29.1.1 |
rsWSDPrivateSpecialCheckPeriodThe period for getting the private variables.rw INTEGER .1.3.6.1.4.1.89.35.1.29.1.2 |
rsWSDPrivateExtraVar1IDThis MIB variable will be retrieved from the server.rw OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.29.1.3 |
rsWSDPrivateExtraVar1WeightThe weight for variable number 1.rw INTEGER .1.3.6.1.4.1.89.35.1.29.1.4 |
rsWSDPrivateExtraVar2IDThis MIB variable will be retrieved from the server.rw OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.29.1.5 |
rsWSDPrivateExtraVar2WeightThe weight for variable number 2.rw INTEGER .1.3.6.1.4.1.89.35.1.29.1.6 |
rsWSDPrivateRetriesThe number of retries before issuing a trap.rw INTEGER .1.3.6.1.4.1.89.35.1.29.1.7 |
rsWSDPrivateCommunityThe SNMP community name with which we access the servers.rw DisplayString .1.3.6.1.4.1.89.35.1.29.1.8 |
rsWSDPrivateExtraVar1ModeSpecify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)rw Enumeration .1.3.6.1.4.1.89.35.1.29.1.9 |
rsWSDPrivateExtraVar2ModeSpecify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)rw Enumeration .1.3.6.1.4.1.89.35.1.29.1.10 |
rsWSDdummy9Dummy variable for stopping getnext.ro INTEGER .1.3.6.1.4.1.89.35.1.29.2 |
rsWSDDNSResolutionEnable/Disable DNS resolution for Farm Addresses. In proximity mode, the WSD will give the best proximity address for the farm.rw Enumeration .1.3.6.1.4.1.89.35.1.31 |
rsWSDUserPasswordSoftware download user provided password.rw DisplayString .1.3.6.1.4.1.89.35.1.33 |
rsWSDUserVersionSoftware download user provided version.rw DisplayString .1.3.6.1.4.1.89.35.1.34 |
rsWSDNatStatusEnable/Disable NAT - to hide the address of the server in messages send .rw Enumeration .1.3.6.1.4.1.89.35.1.35 |
rsWSDRedundancyTakebackWhether to take the interfaces when coming up from redundancy failure automatically or wait for manual terminal commandrw Enumeration .1.3.6.1.4.1.89.35.1.37 |
rsMLB OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.38 |
rsCSD OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.39 |
rsNWSD OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.40 |
rsWSDIfTableRND-specific interface table. Each table entry includes an
index, Board number, Network Address, interface status, clock
indicator and interface cost. SEQUENCE OF RsWSDIfEntry .1.3.6.1.4.1.89.35.1.41 |
rsWSDIfEntryThe row definition for this table. RsWSDIfEntry .1.3.6.1.4.1.89.35.1.41.1 |
rsWSDIfIndexIndex to the RND Interface Table. The interface defined by a
particular value of this index is the same interface as
identified by the same value of ifIndex (MIBII).ro INTEGER .1.3.6.1.4.1.89.35.1.41.1.1 |
rsWSDIfBoardNumThe interface defined by this entry correspTnds to the board
defined by the same value of rndSlotBoardNum in the rndSlotTab.ro INTEGER .1.3.6.1.4.1.89.35.1.41.1.2 |
rsWSDIfNetAddressThe IP address of the interface defined by the particular value of
rsWSDIfIndex.ro NetworkAddress .1.3.6.1.4.1.89.35.1.41.1.3 |
rsWSDIfStatusThe current status of the interface.ro Enumeration .1.3.6.1.4.1.89.35.1.41.1.4 |
rsWSDIfClockTypersWSDIfClockType defines the type of clock each interface
uses: internal or external.rw Enumeration .1.3.6.1.4.1.89.35.1.41.1.5 |
rsWSDIfBaudRateDefines the baud rate of use by the interface. The valid
rates are determined by the type of the media for which this
baud rate is defined.rw INTEGER -- word .1.3.6.1.4.1.89.35.1.41.1.6 |
rsWSDIfCostThis variable assigns a transmission cost to the interface
(channel or LAN). These costs are used in Level II routing. The
costs aretypically inversly proportional to the channel quality.rw INTEGER -- word .1.3.6.1.4.1.89.35.1.41.1.7 |
rsWSDIfCompressionDefines whether data compression is enabled or disabled for the
interface.rw Enumeration .1.3.6.1.4.1.89.35.1.41.1.8 |
rsWSDIfCompressionStatusDefines the status of the compression component:
not-inserted - Compression component is not in the device
active - Compression is enabled and operates correctly
not-active - Compression is enables but does not operate.
The reason may be that there is no compression
component on the device connected to this interface.
disabled - Compression was disabled by management, using
variable rndCompression.ro Enumeration .1.3.6.1.4.1.89.35.1.41.1.9 |
rsWSDIfCompressionRatePercentage of compression. This variable applies only
if rndCompressionStatus is active.ro INTEGER .1.3.6.1.4.1.89.35.1.41.1.10 |
rsWSDIfLATCompressionEnable/Disable the LAT Compression.rw Enumeration .1.3.6.1.4.1.89.35.1.41.1.11 |
rsWSDIfCompressionTypeThis parameter indicates the type of compression option available in the device.
none(1) - indicates that there is no compression option in the device
lowSpeed(2) - indicates a compression option which is operational up
to line speed sof 64 kbps.
highSpeed(3)- indicates a compression option which is operational up
to line speeds of 2 Mbps.ro Enumeration .1.3.6.1.4.1.89.35.1.41.1.12 |
rsWSDIfFilterModeThis parameter indicates the type of filtering in the device.rw Enumeration .1.3.6.1.4.1.89.35.1.41.1.13 |
rsWSDIfChannelTypeThe type of the WAN channelrw Enumeration .1.3.6.1.4.1.89.35.1.41.1.14 |
rsWSDIfBridgeThis variable indicates whether this interface forward Layer II pakages.rw Enumeration .1.3.6.1.4.1.89.35.1.41.1.15 |
rsWSDHighPriorityIfThis variable indicates whether this interface will forward pakages
that fit HighPriority set by the manager.rw Enumeration .1.3.6.1.4.1.89.35.1.41.1.16 |
rsWSDWanHeaderThis variable indicates the RND WAN header type used for frames
which pass through this interface. 'regular' specifies a 14 bytes
header compatible with older OG versions and 'short' a 4 byte header
compatible with the RND adapter product family.rw Enumeration .1.3.6.1.4.1.89.35.1.41.1.17 |
rsWSDDuplexModeThis variable indicates whether this interface operates in half duplex
full duplex or auto negotiation mode.rw Enumeration .1.3.6.1.4.1.89.35.1.41.1.18 |
rsWSDClientMirrorPercentageThe percent of client entries to back up.rw INTEGER .1.3.6.1.4.1.89.35.1.42 |
rsWSDMirrorStatusEnable/Disable mirroring. This enables the allocation of the mirror tables.rw Enumeration .1.3.6.1.4.1.89.35.1.43 |
rsWSDMirrorProtocolModeEnable/Disable of the mirror protocol. That is whether to send the mirror
messages.rw Enumeration .1.3.6.1.4.1.89.35.1.44 |
rsWSDApplicationMirrorTableTable containing the list of active mirror entries. SEQUENCE OF RsWSDApplicationMirrorEntry .1.3.6.1.4.1.89.35.1.45 |
rsWSDApplicationMirrorEntryThe row definition for this table. RsWSDApplicationMirrorEntry .1.3.6.1.4.1.89.35.1.45.1 |
rsWSDMirrorActiveAddressThe IP address of the active device.ro IpAddress .1.3.6.1.4.1.89.35.1.45.1.1 |
rsWSDMirrorActiveStatusThis variable indicates the administrative status of this entry.
Used to delete an entry of this table.rw Enumeration .1.3.6.1.4.1.89.35.1.45.1.2 |
rsWSDdummy11Dummy variable for stopping getnext.ro INTEGER .1.3.6.1.4.1.89.35.1.45.2 |
rsWSDClientMirrorPollingTimeThe polling time for sending the client entries.rw INTEGER .1.3.6.1.4.1.89.35.1.46 |
rsPlatformIdentifierAn administratively-assigned value that identifies managed device platform.ro Enumeration .1.3.6.1.4.1.89.35.1.47 |
rsConfigurationIdentifierAn administratively-assigned value that identifies managed device configuration.ro Enumeration .1.3.6.1.4.1.89.35.1.48 |
rsSWPasswordStatusSoftware download password status.rw Enumeration .1.3.6.1.4.1.89.35.1.49 |
rsWSDFlashSizeFlash Sizero INTEGER .1.3.6.1.4.1.89.35.1.50 |
rsWSDDRAMSizeDRAM Sizero INTEGER .1.3.6.1.4.1.89.35.1.51 |
rsWSDVLANRedundOperStatusEnable/Disable the backup redundant device for a VLAN.rw Enumeration .1.3.6.1.4.1.89.35.1.52 |
rsWSDResourceUtilizationResource Utilization of WSD. Considers network utilization and internal CPU utilizationro INTEGER .1.3.6.1.4.1.89.35.1.53 |
rsWSDRSResourceUtilizationResource Utilization of internal CPU utilizationro INTEGER .1.3.6.1.4.1.89.35.1.54 |
rsWSDREResourceUtilizationResource Utilization of network utilizationro INTEGER .1.3.6.1.4.1.89.35.1.55 |
rsWSDBuildNumberBuild numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.56 |
rsWSDUseOneTrapWhen enabled, a single trap is used to indicate server failure. When disabled,
continuous traps are sent.rw Enumeration .1.3.6.1.4.1.89.35.1.57 |
rsWSDSecuredComm OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.58 |
rsWSDSCProtcolsTableTable containing the list of ports/protocols for secured (encrypted)
communication between the device and the management station or other device. SEQUENCE OF RsWSDSCProtcolsEntry .1.3.6.1.4.1.89.35.1.58.1 |
rsWSDSCProtcolsEntryThe row definition for protocol table. RsWSDSCProtcolsEntry .1.3.6.1.4.1.89.35.1.58.1.1 |
rsWSDSCProtocolThe protocol that should work in secured mode.ro Enumeration .1.3.6.1.4.1.89.35.1.58.1.1.1 |
rsWSDSCProtocolStatusThe status (secured or not secured) of the protocol.rw Enumeration .1.3.6.1.4.1.89.35.1.58.1.1.2 |
rsWSDSNMPPortsTableThe table contains all the physical ports. Each port can be set to
allow/block SNMP operations to the device. SEQUENCE OF RsWSDSNMPPortsEntry .1.3.6.1.4.1.89.35.1.59 |
rsWSDSNMPPortsEntryRow definition for the table. RsWSDSNMPPortsEntry .1.3.6.1.4.1.89.35.1.59.1 |
rsWSDSNMPPhysicalPortNumberPhysical port number.ro INTEGER .1.3.6.1.4.1.89.35.1.59.1.1 |
rsWSDSNMPPhysicalPortStateenable - accept SNMP operations on the physical port. disable -
ignore SNMP opertaions on the physical port.rw Enumeration .1.3.6.1.4.1.89.35.1.59.1.2 |
rsBWM OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.60 |
rsWSDTelnetUserTableA table containing the users authorized to use TELNET. SEQUENCE OF RsWSDTelnetUserEntry .1.3.6.1.4.1.89.35.1.61 |
rsWSDTelnetUserEntryInformation about a particular Telnet user. RsWSDTelnetUserEntry .1.3.6.1.4.1.89.35.1.61.1 |
rsWSDTelnetUserNameUser Name.rw DisplayString .1.3.6.1.4.1.89.35.1.61.1.1 |
rsWSDTelnetUserPasswordUser password.rw DisplayString .1.3.6.1.4.1.89.35.1.61.1.2 |
rsWSDTelnetUserEAddrUser email address.rw DisplayString .1.3.6.1.4.1.89.35.1.61.1.3 |
rsWSDTelnetUserSeverityminimum failure severity to be notified by mailrw Enumeration .1.3.6.1.4.1.89.35.1.61.1.4 |
rsWSDTelnetUserStatusEntry statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.61.1.5 |
rsWSDTelnetUserGroupThe group to which that user belongs.rw DisplayString .1.3.6.1.4.1.89.35.1.61.1.6 |
rsWSDTelnetParams OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.62 |
rsWSDTelnetPortThe Telnet Server Port.rw INTEGER .1.3.6.1.4.1.89.35.1.62.1 |
rsWSDTelnetStatusTelnet Status. Enable/Disable Telnet Terminal operation.rw Enumeration .1.3.6.1.4.1.89.35.1.62.2 |
rsSSD OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.63 |
rsSSDvirtualLan OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.63.1 |
rsSSDvirtualLanTableAn entry of this table specifies an new ifIndex with a type of
propVirtual(53). SEQUENCE OF RsSSDvirtualLanEntry .1.3.6.1.4.1.89.35.1.63.1.1 |
rsSSDvirtualLanEntryA list of information for each virtual LAN. RsSSDvirtualLanEntry .1.3.6.1.4.1.89.35.1.63.1.1.1 |
rsSSDvlIfIndexAn logical interface number, corresponded this VLrw INTEGER .1.3.6.1.4.1.89.35.1.63.1.1.1.1 |
rsSSDvlProtoThe protocol, supported by this VL. The meanings of the values are:
other: none of the following. This VL includes any protocol except the
following protocols. It is a bridging VL. RS relies on
a third-party router to exchange traffic between nodes on different
virtual LANs of this type.
IP: This is a routing VL, RS will route between nodes on
different virtual LANs.
IPmulticast: RS will broadcast the message to all the VL's ports. Used for
video-conferencing applications.
ipxRaw: This is a Routing VL, RS will route between nodes on
different virtual LANs.
ipxET: This is a routing VL, RS will route between nodes on
different virtual LANs.
ipxLLC: This is a routing VL, RS will route between nodes on
different virtual LANs.
ipxSNAP: This is a routing VL, RS will route between nodes on
different virtual LANs.
decNET: This is a bridging VL, RS relies on a third-party router
to exchange traffic between nodes on different DECnet virtual
LANs of this type.
netBios: This is a Bridging VL, RS relies on a third-party router
to exchange traffic between nodes on different NetBIOS virtual
LANs of this type.
appleTalk: This is a bridging VL, RS relies on a third-party router
to exchange traffic between nodes on different AppleTalk virtual
LANs of this type.
swVlan: This is a Bridging and routing VL (switch VL) , Bridging is
done on the Hertz/Uhaul level , and the RS route between nodes on
different virtual LANs and/or between nodes of the switch VL.rw Enumeration .1.3.6.1.4.1.89.35.1.63.1.1.1.2 |
rsSSDvlAutoConfigEnableIt is used only in the case of IP. The meanings of the values are:
true(1): Autolearning is used for this VL
false(2): Autolearning isn't used for this VL from ports, specified in
the table virtualLanAutoConfTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.63.1.1.1.3 |
rsSSDvlStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.63.1.1.1.4 |
rsSSDvlTyperegular - ordinary type
specBroadcast - for switches that support VLANs as a set of ports and
only as a broadcast domain: broadcast frames do not
cross VLAN's bounders, but unicast frames may be
transmitted between different VLANs. Permits passing
of broadcast frames between Vgate's VLANs.
specArpReq - for switches that support VLANs as a set of ports and
only as a broadcast domain: broadcast frames do not
cross VLAN's bounders, but unicast frames may be
transmitted between different VLANs. Permits passing
of ARP request frames between Vgate's VLANs.
specBroadcastAndUnicast -
for switches that support VLANs as a set of ports
but no frame crosses VLAN's bounders. Permits passing
of IP/ARP request broadcast and IP unicast frames
between Vgate's VLANs.
specArpReqAndUnicast -
for switches that support VLANs as a set of ports
but no frame crosses VLAN's bounders. Permits passing
of ARP request broadcast and IP unicast frames between
Vgate's VLANs. This type can be used only for IP VLANs.
specSwitch -
for switches that support VLANs as a set of ports.
This VLAN type is for switching when packets do not have
to get to the cpu except when an IP interface defined on the VLAN.
In Switch VLAN the cpu don't interfere in the bridging action
this is done on the Herzts level (L2).rw Enumeration .1.3.6.1.4.1.89.35.1.63.1.1.1.5 |
rsSSDvlTagA VLAN tag, used for this VLAN on tagged ports.
If it's 0, then a value of (rsSSDvlIfIndex-100000+1) is usedrw INTEGER .1.3.6.1.4.1.89.35.1.63.1.1.1.6 |
rsSSDvlPriorityA user priority, used for this VLAN on tagged ports.rw Enumeration .1.3.6.1.4.1.89.35.1.63.1.1.1.7 |
rsSSDvirtualLanPortsTableFor each VL (a ifIndex with a type of propVirtual(53)) an entry of this
table specifies a set of ports, which it contains. SEQUENCE OF RsSSDvirtualLanPortEntry .1.3.6.1.4.1.89.35.1.63.1.2 |
rsSSDvirtualLanPortEntryA entry of this table specifies a VL and a port belonging to it RsSSDvirtualLanPortEntry .1.3.6.1.4.1.89.35.1.63.1.2.1 |
rsSSDvLIfIndexAn logical interface number, corresponding to this VLrw INTEGER .1.3.6.1.4.1.89.35.1.63.1.2.1.1 |
rsSSDvLPortIfIndexA physical port belonging to the VL specified by rsSSDvlIfIndex.rw INTEGER .1.3.6.1.4.1.89.35.1.63.1.2.1.2 |
rsSSDvLPortTypestatic means configured by user dynamic means autoconfigured by the RSro Enumeration .1.3.6.1.4.1.89.35.1.63.1.2.1.3 |
rsSSDvLPortStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.63.1.2.1.4 |
rsSSDvLPortTagThis variable indicate if the port is tagged or untaggedrw Enumeration .1.3.6.1.4.1.89.35.1.63.1.2.1.5 |
rsWSDThresholdWarnings OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.64 |
rsWSDThreshTrapFloodDelayThis variable defines how far (in seconds) will 2 Threshold Warning Traps be
spaced for the same Threshold Warning Type. Default = 0, i.e. DISABLEDrw INTEGER .1.3.6.1.4.1.89.35.1.64.1 |
rsWSDCriticalTrapFloodDelayThis variable defines how far (in seconds) will 2 Critical Warning Traps be
spaced (of any type). Default = 20 seconds.rw INTEGER .1.3.6.1.4.1.89.35.1.64.2 |
rsIDS OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.65 |
rsWSDLicenseThe new licence for the devicerw DisplayString .1.3.6.1.4.1.89.35.1.66 |
rsErrMailParams OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.67 |
rsErrMailEnableSend email on errors enablerw Enumeration .1.3.6.1.4.1.89.35.1.67.1 |
rsErrMailGatewayprimary SMTP gateway for error mailrw IpAddress .1.3.6.1.4.1.89.35.1.67.2 |
rsErrMailSrcAddresssource address to be used by device for outgoing mailrw DisplayString .1.3.6.1.4.1.89.35.1.67.3 |
rsWSDWebParams OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.68 |
rsWSDWebPortThe Web Server Port.rw INTEGER .1.3.6.1.4.1.89.35.1.68.1 |
rsWSDWebStatusWeb Status. Enable/Disable Web operation.rw Enumeration .1.3.6.1.4.1.89.35.1.68.2 |
rsWSDWebHelpLocationLocation of the help files directory.rw DisplayString .1.3.6.1.4.1.89.35.1.68.3 |
rsWSDSysParams OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.69 |
rsWSDSysFlashSizeThe flash size of the device in mega bytes.ro INTEGER .1.3.6.1.4.1.89.35.1.69.1 |
rsWSDSysUpTimeTime since the system was last reinitialized in a convenient format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.69.2 |
rsWSDSysManagedTimeThe time will be sent in the format hh:mm:ssrw DisplayString .1.3.6.1.4.1.89.35.1.69.3 |
rsWSDSysManagedDateThe date will be sent in the format dd/mm/yyyyrw DisplayString .1.3.6.1.4.1.89.35.1.69.4 |
rsWSDLicenseIDLicense ID used for license downgradero DisplayString .1.3.6.1.4.1.89.35.1.70 |
rsWSDSendFakeArpControls whether a backup will send a fake ARP, advertising the main box's
interfaces and VIPs, when the main box returns to service.rw Enumeration .1.3.6.1.4.1.89.35.1.71 |
rsWSDNTP OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.72 |
rsWSDNTPServerAddrServer IP address.rw IpAddress .1.3.6.1.4.1.89.35.1.72.1 |
rsWSDNTPIntervalTime update interval.rw INTEGER .1.3.6.1.4.1.89.35.1.72.2 |
rsWSDNTPStatusEnable status for NTP synchronization.rw Enumeration .1.3.6.1.4.1.89.35.1.72.3 |
rsWSDNTPTimeZoneOffset from Greenwich time (format hh:mm).rw DisplayString .1.3.6.1.4.1.89.35.1.72.4 |
rsWSDNTPPortA UDP Port number.rw INTEGER .1.3.6.1.4.1.89.35.1.72.5 |
rsStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.73 |
rsPhysPortMirrorTableTable containing the list of copy ports SEQUENCE OF RsPhysPortMirrorEntry .1.3.6.1.4.1.89.35.1.74 |
rsPhysPortMirrorEntryThe row definition for physical copy port table. RsPhysPortMirrorEntry .1.3.6.1.4.1.89.35.1.74.1 |
rsPhysPortMirrorSrcInfThe port under sniffingro INTEGER .1.3.6.1.4.1.89.35.1.74.1.1 |
rsPhysPortMirrorDstPortThe destination port - the target sniffer portro INTEGER .1.3.6.1.4.1.89.35.1.74.1.2 |
rsPhysPortMirrorRxTxCopy Rx/Tx traffic to the copy port .rw Enumeration .1.3.6.1.4.1.89.35.1.74.1.3 |
rsPhysPortMirrorRxBroadCastThe copy will include broadcast/unknown or notrw Enumeration .1.3.6.1.4.1.89.35.1.74.1.4 |
rsPhysPortMirrorStatusUsed to delete an entry of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.74.1.5 |
rsPhysPortMirrorBackupDstPortThe destination port - the target sniffer portrw INTEGER .1.3.6.1.4.1.89.35.1.74.1.6 |
rsPhysPortMirrorDstStatusThe status of the dest-port according to the health check:
active - the port is ok and can be used as a destination port for copy-port
portDown - the port has been recognized as physically DOWN and therefore the traffic
will not be copied to this port until it will be recognized as physically UP
checkIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore
the traffic will not be copied to this port until the check will recognize differently
checkIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has
been recognized as physically DOWN.ro Enumeration .1.3.6.1.4.1.89.35.1.74.1.7 |
rsPhysPortMirrorBackupStatusThe status of the backup-port according to the health check:
Active - the port is ok and can be used as a destination port for copy-port
PortDown - the port has been recognized as physically DOWN and therefore the traffic
will not be copied to this port until it will be recognized as physically UP
CheckIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore
the traffic will not be copied to this port until the check will recognize differently
CheckIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has
been recognized as physically DOWN
None - for the case there is no defined backup port.ro Enumeration .1.3.6.1.4.1.89.35.1.74.1.8 |
rsPhysPortMirrorActiveDstPortThe active dest-port at a certain time, if it is the dest-port or the backup-port or none of
them.ro Enumeration .1.3.6.1.4.1.89.35.1.74.1.9 |
rsCP OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.75 |
rsVWSD OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.76 |
rsVWSDDataPermissionsTableTable containing the list of data items to which Farm administrators
of the virtual wsd has permissions. SEQUENCE OF RsVWSDDataPermissionsTableEntry .1.3.6.1.4.1.89.35.1.76.1 |
rsVWSDDataPermissionsTableEntryThe row definition for this table. RsVWSDDataPermissionsTableEntry .1.3.6.1.4.1.89.35.1.76.1.1 |
rsVWSDUserGroupThe Group of users for whom data permission is given.ro DisplayString .1.3.6.1.4.1.89.35.1.76.1.1.1 |
rsVWSDDataTypeHolds a string that identifies the table of the index by which the
data filtering is done.ro OCTET STRING .1.3.6.1.4.1.89.35.1.76.1.1.2 |
rsVWSDDataItemsThe Value(s) of the index column for the data item to which permission is set.ro OCTET STRING .1.3.6.1.4.1.89.35.1.76.1.1.3 |
rsVWSDDataStatusThe row status for the tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.76.1.1.4 |
rsWSDManagementPortsThe entry indicates the functionality of the device.
outOfPath implies that the device will be able to have a management
port, and the rest of the ports will be used for sniffing. switch
implies the regular functionality of the device (router or VLAN).
promiscuous will have static port mappings for forwarding.rw Enumeration .1.3.6.1.4.1.89.35.1.77 |
rsWSDManagementPortsTableTable containing the operation of each port.. SEQUENCE OF RsWSDManagementPortsEntry .1.3.6.1.4.1.89.35.1.78 |
rsWSDManagementPortsEntryThe row definition for this table. RsWSDManagementPortsEntry .1.3.6.1.4.1.89.35.1.78.1 |
rsWSDPortIndexThe index of the physical ports.ro INTEGER .1.3.6.1.4.1.89.35.1.78.1.1 |
rsWSDPortOperationThe operation of the particular port.ro Enumeration .1.3.6.1.4.1.89.35.1.78.1.2 |
rsCCK OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.79 |
rsWSDSshParams OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.80 |
rsWSDSshPortThe SSH Server Port.rw INTEGER .1.3.6.1.4.1.89.35.1.80.1 |
rsWSDSshStatusSSH Status. Enable/Disable SSH operation.rw Enumeration .1.3.6.1.4.1.89.35.1.80.2 |
rsWSDHttpsParams OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.81 |
rsWSDHttpsPortThe Https Server Port.rw INTEGER .1.3.6.1.4.1.89.35.1.81.1 |
rsWSDHttpsStatusHttps Status. Enable/Disable Https operation.rw Enumeration .1.3.6.1.4.1.89.35.1.81.2 |
rsWSDStaticForwardingTableTable containing the static fowarding configration. SEQUENCE OF RsWSDStaticForwardingEntry .1.3.6.1.4.1.89.35.1.82 |
rsWSDStaticForwardingEntryThe row definition for this table. RsWSDStaticForwardingEntry .1.3.6.1.4.1.89.35.1.82.1 |
rsWSDStaticSourcePortThe index of the source port.ro INTEGER .1.3.6.1.4.1.89.35.1.82.1.1 |
rsWSDStaticDestinationPortThe destination port.rw INTEGER .1.3.6.1.4.1.89.35.1.82.1.2 |
rsWSDStaticPortOperationThe operation for the specific port. process implies that the packets
will be processed (analyzed, filtered etc.) prior to being forwarded.
forward implies that the packets will be forwarded.rw Enumeration .1.3.6.1.4.1.89.35.1.82.1.3 |
rsWSDStaticStatusThis variable indicates the administrative status of this entry.
Used to delete an entry of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.82.1.4 |
rsRadiusServer OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1.83 |
rsRadiusMainServerAddrThe IP Address of the radius main server.rw IpAddress .1.3.6.1.4.1.89.35.1.83.1 |
rsRadiusMainServerPortThe port on which the radius main server listensrw INTEGER .1.3.6.1.4.1.89.35.1.83.2 |
rsRadiusMainServerSecretThe key with which the user's password is encrypted.rw DisplayString .1.3.6.1.4.1.89.35.1.83.3 |
rsRadiusBackupServerAddrThe IP Address of the backup radius server.rw IpAddress .1.3.6.1.4.1.89.35.1.83.4 |
rsRadiusBackupServerPortThe port on which the radius backup server listensrw INTEGER .1.3.6.1.4.1.89.35.1.83.5 |
rsRadiusBackupServerSecretThe key with which the user's password is encrypted.rw DisplayString .1.3.6.1.4.1.89.35.1.83.6 |
rsAuthenticationMethodRadius authentication method.rw Enumeration .1.3.6.1.4.1.89.35.1.83.7 |
rsRadiusServerTimeoutNumber of seconds to wait for reply from the radius server before
retransmitting the request.rw INTEGER .1.3.6.1.4.1.89.35.1.83.8 |
rsRadiusServerRetriesMinimal number of unanswered request attempts before considering the radius
server disconnected.rw INTEGER .1.3.6.1.4.1.89.35.1.83.9 |
rsIfTableDevice physical interface table SEQUENCE OF RsIfEntry .1.3.6.1.4.1.89.35.1.84 |
rsIfEntryThe row definition for this table RsIfEntry .1.3.6.1.4.1.89.35.1.84.1 |
rsIfIndexinterface's indexro INTEGER .1.3.6.1.4.1.89.35.1.84.1.1 |
rsIfSpeedinterface's speedrw Enumeration .1.3.6.1.4.1.89.35.1.84.1.2 |
rsIfDuplexinterface's duplexrw Enumeration .1.3.6.1.4.1.89.35.1.84.1.3 |
rsIfAutoNegotiateinterface's autonegotiation statusrw Enumeration .1.3.6.1.4.1.89.35.1.84.1.4 |
rsIfRowStatusinterface's rowstatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.1.84.1.5 |
rsWSDDeviceOperationModeDevice operation mode: redirection (load balancing) or static forwarding (IDS, BWM).rw Enumeration .1.3.6.1.4.1.89.35.1.85 |
rsWSDVersionStatusIndicates whether the current version is closed or still open (under development).ro Enumeration .1.3.6.1.4.1.89.35.1.86 |
rndMidLevelManagement OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2 |
rndAlarmOptions OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2.2 |
rndAlarmEnablingIndicates whether alarms should be issued to the high-level
NMSrw Enumeration .1.3.6.1.4.1.89.35.2.2.1 |
rndAlarmIntervalIndicates the minimal period of time which must pass after issuing
an alarm before issuing the same alarm again.rw INTEGER .1.3.6.1.4.1.89.35.2.2.2 |
rndMonitoredElementsTableThe table of monitored elements of the network SEQUENCE OF RndMonitoredElementEntry .1.3.6.1.4.1.89.35.2.3 |
rndMonitoredElementEntryThe row definition for this table. RndMonitoredElementEntry .1.3.6.1.4.1.89.35.2.3.1 |
rndMonitoredElementAddressThe IP address of the monitored elementro IpAddress .1.3.6.1.4.1.89.35.2.3.1.1 |
rndMonitoredElementCommunityThe community of the monitored elementrw DisplayString .1.3.6.1.4.1.89.35.2.3.1.2 |
rndMonitoredElementLabelThe label assigned by the network manager to the monitored elementrw DisplayString .1.3.6.1.4.1.89.35.2.3.1.3 |
rndDefaultPollingIntervalThe default period of time between two consecutive pollings of the
monitored element for the value of an object instance. If no other polling
interval is specifically assigned to the monitored object instance, this
one will be usedrw INTEGER .1.3.6.1.4.1.89.35.2.3.1.4 |
rndDefaultLogFileThe default file path of the log-file which will contain the polling
results for the monitored element. If no other file path is specifically
assigned to the monitored object instance, this log-file will be used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.3.1.5 |
rndMonitoredElementStatusIt is used to manage the monitored elements table and indicates
the current monitoring status of an element.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.3.1.6 |
rndMonitoringTableThe table of monitored object instances. Each monitored object instance
belongs to a monitored element previously entered in the
rndMonitoredElementsTable. SEQUENCE OF RndMonitoringEntry .1.3.6.1.4.1.89.35.2.4 |
rndMonitoringEntryThe row definition for this table. RndMonitoringEntry .1.3.6.1.4.1.89.35.2.4.1 |
rndMonitoredElementA label assigned by the network manager to a monitored element to
which this monitored object instance belongs. This label must have
been previously entered in an instance of rndMonitoredElementLabelro DisplayString .1.3.6.1.4.1.89.35.2.4.1.1 |
rndMonitoredObjectInstanceLabelThe label assigned by the network manager to the monitored object instancero DisplayString .1.3.6.1.4.1.89.35.2.4.1.2 |
rndMonitoredObjectNameThe symbolic object type name of the object to which the monitored object
instance belongs (as it appears the MIB module definition). In case of
ambiguity the : format should be used.
An instance of rndMonitoredObjectName need not be assigned any value, if
the corresponding instance of rndMonitoredObjectIdentifier is assigned a
value, since any one of these, together with the object instance
identifier, suffices to unambigously identify the monitored object
instance.rw DisplayString .1.3.6.1.4.1.89.35.2.4.1.3 |
rndMonitoredObjectIdentifierThe object identifier of the object to which the monitored object
instance belongs.
An instance of rndMonitoredObjectIdentifier need not be assigned any value, if
the corresponding instance of rndMonitoredObjectName is assigned a value,
since any one of these, together with the object instance identifier,
suffices to unambigously identify the monitored object instance.rw OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2.4.1.4 |
rndMonitoredObjectInstanceThe instance identifier (key) of the monitored object instance.rw OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2.4.1.5 |
rndMonitoredObjectSyntaxThe syntax of the monitored object instance (i.e., the syntax of the object
type of the object to which the monitored instance belongs).
Need not be assigned any value if the corresponding instance of
rndMonitoredObjectName has been assigned a valuerw Enumeration .1.3.6.1.4.1.89.35.2.4.1.6 |
rndMonitoringIntervalThe period of time between two consecutive retrievals of the monitored
object instance's value.rw INTEGER .1.3.6.1.4.1.89.35.2.4.1.7 |
rndAlarmMaxTresholdThe value of the monitored object instance, the exceeding of which
will cause the generation of an alarm to the high-level management
station.rw INTEGER .1.3.6.1.4.1.89.35.2.4.1.8 |
rndAlarmMinTresholdIf the value of the monitored object instance falls below the value
assigned to rndAlarmMinTreshold, an alarm to the high-level management
station will be issued.rw INTEGER .1.3.6.1.4.1.89.35.2.4.1.9 |
rndMonitoringLogfileThe entire path of the file in which the results of the monitoring
of this object instance should be recorded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.4.1.10 |
rndMonitoringEntryStatusIt is used to manage the monitored object instances table and
indicates the current monitoring status of an object instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.4.1.11 |
rndMibFilesTableThe table of monitored object instances. Each monitored object instance
belongs to a monitored element previously entered in the
rndMonitoredElementsTable. SEQUENCE OF RndMibFileEntry .1.3.6.1.4.1.89.35.2.5 |
rndMibFileEntryThe row definition for this table. RndMibFileEntry .1.3.6.1.4.1.89.35.2.5.1 |
rndMibFileIndexThe number of the MIB file in the list MIB files supported by the
Mid-Level management station. The order of the MIB files in this
list must reflect the the IMPORT relation between the MIBS contained
in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing
MIB A must have a lesser index in this table than the file containing
MIB B.ro INTEGER .1.3.6.1.4.1.89.35.2.5.1.1 |
rndMibFilePathThe path of the MIB file in the MIB file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.5.1.2 |
rndMibFileRefreshIndicates if the file should be fetched after setting this entry from the
MIB file server.rw Enumeration .1.3.6.1.4.1.89.35.2.5.1.3 |
rndMibFileEntryStatusIt is used to manage the MIB files table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.5.1.4 |
rndHardwareConfigurationIndicates whether the current SET SNMP PDU contains hardware
configuration (i.e., normally read-only variables). SET of such
variables in the Mid-level management station will be allowed only
if this variable is included in the SNMP PDU and its value is true.
Its value as returned in a GET SNMP PDU will always be false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.6 |
rndEraseSimulatedConfigurationeraseSimulatedConfiguration instructs the MLNMS to erase all the
simulated configuration from its configuration data-base (CDB). This
the only accepted value for SNMP SET statements and will never be
returned in SNMP GET statements.
simulatedConfigurationPresent indicates that the MLNMS currently has
a simulated configuration.
simulatedConfigurationErased indicates that the MLNMS currently has
no simulated configuration.rw Enumeration .1.3.6.1.4.1.89.35.2.7 |
rndDeleteValuesTableThis table indicates which MIB variables are row status fields which
control the status of the entry to which they belong. This table also
indicates which (integer!) value of these MIB variables will cause, if
present in a SNMP SET PDU, the deletion of the conceptual row instance
to which the SET MIB variable instance belongs. SEQUENCE OF RndDeleteValuesEntry .1.3.6.1.4.1.89.35.2.8 |
rndDeleteValuesEntryThe row definition for the rndDeleteValuesTable table. RndDeleteValuesEntry .1.3.6.1.4.1.89.35.2.8.1 |
rndRowStatusVariableNameThe name of the row status field. This name may not necessarily be any
name which is present in the MIBs loaded into the MLNMS station.rw DisplayString .1.3.6.1.4.1.89.35.2.8.1.1 |
rndRowStatusObjectIdThe object id of the row status field. If the rndRowStatusVariableName is
a name present in the MIBs loaded into the MLNMS, this MIB
variable is not required, but if given, it must match the object id known
to the MLNMS.
The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId
must be a read-write MIB variable of type INTEGER which belongs to an
entry (i.e, is a child of a MIB variable of type SEQUENCE).rw OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2.8.1.2 |
rndRowDeleteValueThe value of the variable identified by rndRowStatusVariableName and/or
rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause
the deletion of the conceptual row instance which the SET MIB variable
instance belongs.rw INTEGER .1.3.6.1.4.1.89.35.2.8.1.3 |
rndDeleteValueEntryStatusIt is used to delete an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.8.1.4 |
rsIpZeroHopRouting OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.3 |
rsIpZhrGeneralStatusThis parameter enables or disables the IP Zero Hop Routing feature
for all IP interfaces. The IP Zero Hop Routing feature can also be
enabled or disabled on each IP interface through the
rsIpZhrStatusTable.rw Enumeration .1.3.6.1.4.1.89.35.3.1 |
rsIpZhrAgingTimeoutThis parameter controls the aging time-out in seconds of direct
connections which were allocated. The virtual IP address of a direct
connection whose time-out has expired is eligible for allocation to a
different connection.rw INTEGER .1.3.6.1.4.1.89.35.3.2 |
rsIpZhrStatusTableThe administrative status of the ZHR feature per ip interface. SEQUENCE OF RsIpZhrStatusEntry .1.3.6.1.4.1.89.35.3.3 |
rsIpZhrStatusEntryAn entry in the ZHR status table. RsIpZhrStatusEntry .1.3.6.1.4.1.89.35.3.3.1 |
rsIpZhrStatusIpIntfThe Ip interface whose ZHR feature status is accessed.ro IpAddress .1.3.6.1.4.1.89.35.3.3.1.1 |
rsIpZhrAdminStatusIt is used to control whether ZHR will operate on the interface.rw Enumeration .1.3.6.1.4.1.89.35.3.3.1.2 |
rsIpZhrVirtAddressTableThe table of free virtual IP addresses which may be allocated
to establish direct connections - Per IP Interface. SEQUENCE OF RsIpZhrVirtAddressEntry .1.3.6.1.4.1.89.35.3.4 |
rsIpZhrVirtAddressEntryAn entry in the ZHR virtual IP addresses table RsIpZhrVirtAddressEntry .1.3.6.1.4.1.89.35.3.4.1 |
rsIpZhrVirtAddressIpIntfThe Ip Interface to which the IP addresses in this entry are allocated.ro IpAddress .1.3.6.1.4.1.89.35.3.4.1.1 |
rsIpZhrVirtAddressToThe last free IP address in the block.ro IpAddress .1.3.6.1.4.1.89.35.3.4.1.2 |
rsIpZhrVirtAddressFromThe first free IP address in the block.rw IpAddress .1.3.6.1.4.1.89.35.3.4.1.3 |
rsIpZhrVirtAddressStatusIt is used to manage the virtual address table.
The supported actions will be active, createAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.3.4.1.4 |
rsIpZhrConnectionsTableTable of the currently active direct connections. SEQUENCE OF RsIpZhrConnectionEntry .1.3.6.1.4.1.89.35.3.5 |
rsIpZhrConnectionEntryAn entry in the ZHR Connection table RsIpZhrConnectionEntry .1.3.6.1.4.1.89.35.3.5.1 |
rsIpZhrConnectionIpIntfThe IP Interface for which this direct connection was established.ro IpAddress .1.3.6.1.4.1.89.35.3.5.1.1 |
rsIpZhrConnectionSrcIpThe source IP Address of this direct connection.ro IpAddress .1.3.6.1.4.1.89.35.3.5.1.2 |
rsIpZhrConnectionDestIpThe destination IP Address of this direct connection.ro IpAddress .1.3.6.1.4.1.89.35.3.5.1.3 |
rsIpZhrConnectionVirtualIpThe virtual IP address allocated for this direct connection.ro IpAddress .1.3.6.1.4.1.89.35.3.5.1.4 |
rsIpZhrConnectionTypeThe type of this direct connection.
dynamic - established by the RS.
disabled - established by the RS.
The RS detected that the virtual address is already used as
destination by the source BEFORE its allocation, and therefore
marked this connection as 'disabled' to prevent a future
allocation of this virtual address to this source.
static - established by user.ro Enumeration .1.3.6.1.4.1.89.35.3.5.1.5 |
rsIpZhrConnectionAgeThe age of the connection in seconds.ro INTEGER .1.3.6.1.4.1.89.35.3.5.1.6 |
rsIpZhrConnectionStatusIt is used to manage the connections table.
The supported actions will be active, createAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.3.5.1.7 |