RND-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
487
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
487 total| Object Name |
|---|
rnd OBJECT IDENTIFIER .1.3.6.1.4.1.89 |
RFC1155-SMI Unknown .1.3.6.1.4.1.89 |
routeTableOverflowAn overflow condition has occurred in the Routing Table. The Routing
Table is used for IP routing algorithm (RIP). TRAP-TYPE .1.3.6.1.4.1.89.0.5 |
resetRequiredThis trap indicates that in order to perform the last SET request, a reset operation
of the router/bridge is required. This occurs when the layer 2 routing algorithm is
changed between SPF and Spanning Tree. The reset can be performed manually or
using the variable rndAction. TRAP-TYPE .1.3.6.1.4.1.89.0.10 |
endTftpThis trap indicates that in the device finished a TFTP
transaction with the management station.
variable rndErrorDesc and rndErrorSeverity provides the actual message
text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.12 |
abortTftpThis trap indicates that in the device aborted a TFTP session with the management station.
variable rndErrorDesc and rndErrorSeverity provides the actual message text and
severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.13 |
startTftpInformational trap indicating that the device has intiated a
TFTP session. rndErrorDesc will contain the file type in
question TRAP-TYPE .1.3.6.1.4.1.89.0.14 |
ipxRipTblOverflowThis trap indicates that in an OpenGate IPX RIP table overflow.
The bound variable rndErrorDesc, rndErrorSeverity
provides the actual message text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.36 |
ipxSapTblOverflowThis trap indicates that in an OpenGate IPX SAP table overflow.
The bound variable rndErrorDesc, rndErrorSeverity
provides the actual message text and severity respectively. TRAP-TYPE .1.3.6.1.4.1.89.0.37 |
facsAccessVoilationThis trap indicates that message that fits FACS statenebt with operation
blockAndReport was forward to the interface.The bound variable rndErrorDesc,
rndErrorSeverity(== info ) and interface Number. TRAP-TYPE .1.3.6.1.4.1.89.0.49 |
autoConfigurationCompletedThis trap indicates that auto comfiguration completetd succssefully.
The bound variable rndErrorDesc, rndErrorSeverity(== info ) TRAP-TYPE .1.3.6.1.4.1.89.0.50 |
forwardingTabOverflowThis trap indicates that an overflow condition has occurred in the
layer II Forward Table.
The bound variable rndErrorDesc, rndErrorSeverity(== warning ) TRAP-TYPE .1.3.6.1.4.1.89.0.51 |
errorsDuringInit TRAP-TYPE .1.3.6.1.4.1.89.0.61 |
vlanDynPortAdded TRAP-TYPE .1.3.6.1.4.1.89.0.66 |
vlanDynPortRemoved TRAP-TYPE .1.3.6.1.4.1.89.0.67 |
rsSDclientsTableOverflowThis warning is generated when an overflow occurs in the clients table. TRAP-TYPE .1.3.6.1.4.1.89.0.68 |
rsSDinactiveServerThis warning is generated when a server does not respond to the dispatchers polling
and is thought to be inactive. TRAP-TYPE .1.3.6.1.4.1.89.0.69 |
rsIpZhrConnectionsTableOverflowThe Zero Hop Routing connections Table has been overflown. TRAP-TYPE .1.3.6.1.4.1.89.0.70 |
rsIpZhrReqStaticConnNotAcceptedThe requested static connection was not accepted because there is
no available IP virtual address to allocate to it. TRAP-TYPE .1.3.6.1.4.1.89.0.71 |
rsIpZhrVirtualIpAsSourceThe virtual IP address appeared as a source IP.
All the connections using it will be deleted and
it will not be further allocated to new connections. TRAP-TYPE .1.3.6.1.4.1.89.0.72 |
rsIpZhrNotAllocVirtualIpThe source IP address sent an ARP specifying a virtual IP
which was not allocated for this source.
This virtual IP will not be allocated to connections of this
specific source IP. TRAP-TYPE .1.3.6.1.4.1.89.0.73 |
rsSnmpSetRequestInSpecialCfgStateAn incoming SNMP SET request was rejected because no such
requests (except action requests) are accepted after start of
new configuration reception or during sending the current
configuration to an NMS. TRAP-TYPE .1.3.6.1.4.1.89.0.74 |
rsWSDRedundancySwitchWhenever main server fails and backup takes over or server comes
up after failure a trap of this type is issued. TRAP-TYPE .1.3.6.1.4.1.89.0.141 |
rndMng OBJECT IDENTIFIER .1.3.6.1.4.1.89.1 |
rndSysIdIdentification of an RND device. The device type for each
integer clarifies the sysObjectID in MIB - II.ro Enumeration .1.3.6.1.4.1.89.1.1 |
rndActionThis variable enables the operator to perform one of the
specified actions on the tables maintained by the network device.
Send actions require support of proprietery File exchange
protocol.rw Enumeration .1.3.6.1.4.1.89.1.2 |
rndFileNameThe name of the file used internally by RND for transferring
tables maintained by network devices, using a prorietary File
exchange protocol.rw OCTET STRING -- SIZE 256 .1.3.6.1.4.1.89.1.3 |
rndDeviceParams OBJECT IDENTIFIER .1.3.6.1.4.1.89.2 |
rndBridgeTypeIdentification of the RND bridge type.ro Enumeration .1.3.6.1.4.1.89.2.1 |
rndInactiveArpTimeOutThis variable defines the maximum time period that can pass
between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table.rw INTEGER .1.3.6.1.4.1.89.2.2 |
rndBridgeAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.3 |
rndErrorDescA textual description of the enterprise-specific trap sent
to the Network Management Station by the RND managed device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.3.1 |
rndErrorSeverityThe severity type of the enterprise-specific trap sent to the
Network Management Station by the RND managed device.ro INTEGER .1.3.6.1.4.1.89.2.3.2 |
rndBrgVersionThe bridge version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.4 |
rndBrgFeaturesA bit mask that defines the features supported by a particular configuration
of this network element:
__________________________________________
| Byte 1|Byte 2 |Byte 3 | ....|Byte 20 |
|87654321| | 87654321|
|________|_______________________________|
Byte1 :
bit1: TX Block mask
bit2: Source Routing Encapulation
bit3: SNA/SDLC
bit4: Frame Relay
bit5: SNMP
bit6: LAN Manager
bit7: High Performance
bit8: Translation
Byte2 :
bit1: DEC Router
bit2: IPX Router
bit3: IP Router
Byte3 :
bit1: Dial Up Backup
bit2: COD
bit3: FACS
bit4: Load Balance
bit5: Remote Configuration
bit6: RIP 2
bit7: OSPF
bit8: IPX RIP/SAP Filter
Byte4 :
bit1: BootP Server
bit2: BootP Client
bit3: Compression
bit4: V25.bis
bit5: ISDN
bit6: CODv2
bit7: NSPF
bit8: UDP Relay
Byte5
bit1:VirtualLAN
bit2:Static IP Multicast
bit3:IP Redundancy
bit4:CCM2
bit5:ISDN Bonding
bit6:Backup Link Selection
bit7:IP/IPX Forwarding
bit8:Improved COD
Byte6
bit1: Server Disptacher
bit2: ISDN_US
bit3: PPP
bit4: IP Rip Filter
bit5: Zero Hop Routing
bit6: ISDN Japan
Byte7
bit1: With unmanaged Switch
bit2: 2 LANs
bit3: OSPF Ver 2.0
bit4: FACS Ver 2.0
bit5: Multiple WEB Farm
bit6: Backup Serverro OCTET STRING -- SIZE 20 .1.3.6.1.4.1.89.2.5 |
rndBrgLicenseThis parameter is used for entering a s/w license number for a device.
A separate license number is supplied for each device.rw OCTET STRING -- SIZE 20 .1.3.6.1.4.1.89.2.6 |
rndIpHost OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.7 |
rndICMPTransmitionEnableThis variable controlls the ability to transmit ICMP framesrw Enumeration .1.3.6.1.4.1.89.2.7.1 |
rndCommunityTableThe community table of the agent SEQUENCE OF RndCommunityEntry .1.3.6.1.4.1.89.2.7.2 |
rndCommunityEntryThe row definition for this table. RndCommunityEntry .1.3.6.1.4.1.89.2.7.2.1 |
rndCommunityMngStationAddrThe management station that will be allowed to
communicate with the agent IP addressrw IpAddress .1.3.6.1.4.1.89.2.7.2.1.1 |
rndCommunityStringThe community string with which the management
station will communicate with the agentrw DisplayString .1.3.6.1.4.1.89.2.7.2.1.2 |
rndCommunityAccessThe allowed access to this management stationrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.3 |
rndCommunityTrapsEnableShould the agent send traps to the management stationrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.4 |
rndCommunityStatusThe status of this entry. If the status is invalid the
community entry will be deletedrw Enumeration .1.3.6.1.4.1.89.2.7.2.1.5 |
rndManagedTimeThe time will be sent in the format hhmmssrw DisplayString .1.3.6.1.4.1.89.2.8 |
rndManagedDateThe date will be sent in the format ddmmyyyyrw DisplayString .1.3.6.1.4.1.89.2.9 |
genGroup OBJECT IDENTIFIER .1.3.6.1.4.1.89.2.11 |
genGroupHWVersionDefines the HW version of the product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.2.11.1 |
genGroupConfigurationSymbolDefines the Configuration Symbol attached to any hardware module
manufactured by LANNET. One single character A..Z defines the CS
version.ro DisplayString .1.3.6.1.4.1.89.2.11.2 |
genGroupHWStatusThis attribute describes the status of the group hardware as detected
by the sensors software.ro Enumeration .1.3.6.1.4.1.89.2.11.3 |
rndInterface OBJECT IDENTIFIER .1.3.6.1.4.1.89.4 |
rndIfTableRND-specific interface table. Each table entry includes an
index, Board number, Network Address, interface status, clock
indicator and interface cost. SEQUENCE OF RndIfEntry .1.3.6.1.4.1.89.4.1 |
rndIfEntryThe row definition for this table. RndIfEntry .1.3.6.1.4.1.89.4.1.1 |
rndIfIndexIndex to the RND Interface Table. The interface defined by a
particular value of this index is the same interface as
identified by the same value of ifIndex (MIBII).ro INTEGER .1.3.6.1.4.1.89.4.1.1.1 |
rndIfBoardNumThe interface defined by this entry correspTnds to the board
defined by the same value of rndSlotBoardNum in the rndSlotTab.ro INTEGER .1.3.6.1.4.1.89.4.1.1.2 |
rndIfNetAddressThe IP address of the interface defined by the particular value of
rndIfIndex.ro NetworkAddress .1.3.6.1.4.1.89.4.1.1.3 |
rndIfStatusThe current status of the interface.ro Enumeration .1.3.6.1.4.1.89.4.1.1.4 |
rndIfClockTyperndIfClockType defines the type of clock each interface
uses: internal or external.rw Enumeration .1.3.6.1.4.1.89.4.1.1.5 |
rndIfBaudRateDefines the baud rate of use by the interface. The valid
rates are determined by the type of the media for which this
baud rate is defined.rw INTEGER -- word .1.3.6.1.4.1.89.4.1.1.6 |
rndIfCostThis variable assigns a transmission cost to the interface
(channel or LAN). These costs are used in Level II routing. The
costs aretypically inversly proportional to the channel quality.rw INTEGER -- word .1.3.6.1.4.1.89.4.1.1.7 |
rndIfCompressionDefines whether data compression is enabled or disabled for the
interface.rw Enumeration .1.3.6.1.4.1.89.4.1.1.8 |
rndIfCompressionStatusDefines the status of the compression component:
not-inserted - Compression component is not in the device
active - Compression is enabled and operates correctly
not-active - Compression is enables but does not operate.
The reason may be that there is no compression
component on the device connected to this interface.
disabled - Compression was disabled by management, using
variable rndCompression.ro Enumeration .1.3.6.1.4.1.89.4.1.1.9 |
rndIfCompressionRatePercentage of compression. This variable applies only
if rndCompressionStatus is active.ro INTEGER .1.3.6.1.4.1.89.4.1.1.10 |
rndIfLATCompressionEnable/Disable the LAT Compression.rw Enumeration .1.3.6.1.4.1.89.4.1.1.11 |
rndIfCompressionTypeThis parameter indicates the type of compression option available in the device.
none(1) - indicates that there is no compression option in the device
lowSpeed(2) - indicates a compression option which is operational up
to line speed sof 64 kbps.
highSpeed(3)- indicates a compression option which is operational up
to line speeds of 2 Mbps.ro Enumeration .1.3.6.1.4.1.89.4.1.1.12 |
rndIfFilterModeThis parameter indicates the type of filtering in the device.rw Enumeration .1.3.6.1.4.1.89.4.1.1.13 |
rndIfChannelTypeThe type of the WAN channelrw Enumeration .1.3.6.1.4.1.89.4.1.1.14 |
rndIfBridgeThis variable indicates whether this interface forward Layer II pakages.rw Enumeration .1.3.6.1.4.1.89.4.1.1.15 |
rndHighPriorityIfThis variable indicates whether this interface will forward pakages
that fit HighPriority set by the manager.rw Enumeration .1.3.6.1.4.1.89.4.1.1.16 |
rndWanHeaderThis variable indicates the RND WAN header type used for frames
which pass through this interface. 'regular' specifies a 14 bytes
header compatible with older OG versions and 'short' a 4 byte header
compatible with the RND adapter product family.rw Enumeration .1.3.6.1.4.1.89.4.1.1.17 |
rndDuplexModeThis variable indicates whether this interface operates in half duplex
full duplex or auto negotiation mode.rw Enumeration .1.3.6.1.4.1.89.4.1.1.18 |
rndIPX OBJECT IDENTIFIER .1.3.6.1.4.1.89.12 |
rndIPXdriver OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.1 |
rndIPXRip OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.2 |
rndIPXRipFilterGlbTableThe table of RIP global filters per IPX router. SEQUENCE OF RndIPXRipFilterGlbEntry .1.3.6.1.4.1.89.12.2.10 |
rndIPXRipFilterGlbEntryAn entry in the RIP global filter table RndIPXRipFilterGlbEntry .1.3.6.1.4.1.89.12.2.10.1 |
rndIPXRipFilterGlbFLtypeType of filter - input/outputro Enumeration .1.3.6.1.4.1.89.12.2.10.1.1 |
rndIPXRipFilterGlbFLnumberNumber of RIP filter.ro INTEGER .1.3.6.1.4.1.89.12.2.10.1.2 |
rndIPXRipFilterGlbFLStatusThe validity of this entry. An entry with this value set
to invalid may be deleted from the table with IPX
implementation's discretion.rw Enumeration .1.3.6.1.4.1.89.12.2.10.1.3 |
rndIPXRipFilterGlbFLnetworkPaternNumber of filtered network. Value 0xFFFFFFFF applies for
any network.rw OCTET STRING .1.3.6.1.4.1.89.12.2.10.1.4 |
rndIPXRipFilterGlbFLnetworkMaskNetwork maskrw OCTET STRING .1.3.6.1.4.1.89.12.2.10.1.5 |
rndIPXRipFilterGlbFLactionFilter action - permit/deny for this networkrw Enumeration .1.3.6.1.4.1.89.12.2.10.1.6 |
rndIPXRipFilterCircuitTableTable of input/output RIP filters used per IPX circuit number. SEQUENCE OF RndIPXRipFilterCircuitEntry .1.3.6.1.4.1.89.12.2.11 |
rndIPXRipFilterCircuitEntryAn entry in the Circuit RIP filter table RndIPXRipFilterCircuitEntry .1.3.6.1.4.1.89.12.2.11.1 |
rndIPXRipFilterCircFLIfIndexThe Interface identifier for this filter. This value
correspond to rndIPXIfIndex or ipxCircIndex for ET16ro INTEGER .1.3.6.1.4.1.89.12.2.11.1.1 |
rndIPXRipFilterCircFLTypeType of filter - input/outputro Enumeration .1.3.6.1.4.1.89.12.2.11.1.2 |
rndIPXRipFilterCircFLnumberNumber of RIP filter for this circuitro INTEGER .1.3.6.1.4.1.89.12.2.11.1.3 |
rndIPXRipFilterCircFLStatusThe validity of this entry. An entry with this value set
to invalid may be deleted from the table with IPX
implementation's discretion.rw Enumeration .1.3.6.1.4.1.89.12.2.11.1.4 |
rndIPXRipFilterCircFLnetworkPaternNumber of filtered network. Value 0xFFFFFFFF applies for
any network.rw OCTET STRING .1.3.6.1.4.1.89.12.2.11.1.5 |
rndIPXRipFilterCircFLnetworkMaskNetwork maskrw OCTET STRING .1.3.6.1.4.1.89.12.2.11.1.6 |
rndIPXRipFilterCircFLactionFilter action - permit/denyrw Enumeration .1.3.6.1.4.1.89.12.2.11.1.7 |
rndIPXSap OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.3 |
rndIPXSapFilterGlbTableThe table of SAP global filter susedper IPX router. SEQUENCE OF RndIPXSapFilterGlbEntry .1.3.6.1.4.1.89.12.3.10 |
rndIPXSapFilterGlbEntryAn entry in the SAP global filter table RndIPXSapFilterGlbEntry .1.3.6.1.4.1.89.12.3.10.1 |
rndIPXSapFilterGlbFLtypeType of filter-input/outputro Enumeration .1.3.6.1.4.1.89.12.3.10.1.1 |
rndIPXSapFilterGlbFLnumberNumber of SAP filter.ro INTEGER .1.3.6.1.4.1.89.12.3.10.1.2 |
rndIPXSapFilterGlbFLStatusThe validity of this entry. An entry with this value set
to invalid may be deleted from the table with IPX
implementation's discretion.rw Enumeration .1.3.6.1.4.1.89.12.3.10.1.3 |
rndIPXSapFilterGlbFLnetworkPaternNumber network of the filter edservice. Value
0xFFFFFFFF applies for any network.rw OCTET STRING .1.3.6.1.4.1.89.12.3.10.1.4 |
rndIPXSapFilterGlbFLnetworkMaskNetwork maskrw OCTET STRING .1.3.6.1.4.1.89.12.3.10.1.5 |
rndIPXSapFilterGlbFLserviceTypeThe type of the service which may be filtered ;value0xFFFF
applies for all types of service and it's defaultrw INTEGER .1.3.6.1.4.1.89.12.3.10.1.6 |
rndIPXSapFilterGlbFLserviceNameThe name of the service which may be filtered; wild
cardas * may be used in end of the name.rw OCTET STRING .1.3.6.1.4.1.89.12.3.10.1.7 |
rndIPXSapFilterGlbFLactionFilter mode - permit/deny for this servicerw Enumeration .1.3.6.1.4.1.89.12.3.10.1.8 |
rndIPXSapFilterCircuitTableTable of input/output SAP filter susedper IPX circuit number. SEQUENCE OF RndIPXSapFilterCircuitEntry .1.3.6.1.4.1.89.12.3.11 |
rndIPXSapFilterCircuitEntryAn entry in the Circuit SAP filter table RndIPXSapFilterCircuitEntry .1.3.6.1.4.1.89.12.3.11.1 |
rndIPXSapFilterCircFLIfIndexThe Interface identifier for this filter. This value
correspondtornd IPXIfIndex or ipxCircIndex for ET16ro INTEGER .1.3.6.1.4.1.89.12.3.11.1.1 |
rndIPXSapFilterCircFLtypeType of filter-input/outputro Enumeration .1.3.6.1.4.1.89.12.3.11.1.2 |
rndIPXSapFilterCircFLnumberNumber of SAP filter. Th is value correspondto rndIPXSapFilterNumberro INTEGER .1.3.6.1.4.1.89.12.3.11.1.3 |
rndIPXSapFilterCircFLStatusThe validity of this entry. An entry with this value set
to invalid may be deleted from the table with IPX implementation's discretion.rw Enumeration .1.3.6.1.4.1.89.12.3.11.1.4 |
rndIPXSapFilterCircFLnetworkPaternNumber network of the filtered service. Value
0xFFFFFFFF applies for any network.rw OCTET STRING .1.3.6.1.4.1.89.12.3.11.1.5 |
rndIPXSapFilterCircFLnetworkMaskNetwork maskrw OCTET STRING .1.3.6.1.4.1.89.12.3.11.1.6 |
rndIPXSapFilterCircFLserviceTypeThe type of the service which may be filtered; value 0xFFFF
applies for all types of service and it's defaultrw INTEGER .1.3.6.1.4.1.89.12.3.11.1.7 |
rndIPXSapFilterCircFLserviceNameThe name of the service which may be filtered; wild
cardas * may be used i n end of the name.rw OCTET STRING .1.3.6.1.4.1.89.12.3.11.1.8 |
rndIPXSapFilterCircFLactionFilter mode-permit/denyrw Enumeration .1.3.6.1.4.1.89.12.3.11.1.9 |
ipxSystem OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.4 |
ipxBasicSysTableThe IPX System table - basic information. SEQUENCE OF IpxBasicSysEntry .1.3.6.1.4.1.89.12.4.1 |
ipxBasicSysEntryEach entry corresponds to one instance of IPX running
on the system. IpxBasicSysEntry .1.3.6.1.4.1.89.12.4.1.1 |
ipxBasicSysInstanceThe unique identifier of the instance of IPX to which this
row corresponds. This value may be written only when
creating a new entry in the table.rw INTEGER .1.3.6.1.4.1.89.12.4.1.1.1 |
ipxBasicSysExistStateThe validity of this entry in the IPX system table.
Setting this field to off indicates that this entry may be
deleted from the system table at the IPX implementation's
discretion.rw Enumeration .1.3.6.1.4.1.89.12.4.1.1.2 |
ipxBasicSysInReceivesThe total number of IPX packets received, including
those received in error.ro Counter .1.3.6.1.4.1.89.12.4.1.1.3 |
ipxBasicSysInHdrErrorsThe number of IPX packets discarded due to errors in
their headers, including any IPX packet with a size less
than the minimum of 30 bytes.ro Counter .1.3.6.1.4.1.89.12.4.1.1.4 |
ipxBasicSysInUnknownSocketsThe number of IPX packets discarded because the
destination socket was not open.ro Counter .1.3.6.1.4.1.89.12.4.1.1.5 |
ipxBasicSysInDiscardsThe number of IPX packets received but discarded due to
reasons other than those accounted for by
ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets,
ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards.ro Counter .1.3.6.1.4.1.89.12.4.1.1.6 |
ipxBasicSysInDeliversThe total number of IPX packets delivered locally,
including packets from local applications.ro Counter .1.3.6.1.4.1.89.12.4.1.1.7 |
ipxBasicSysNoRoutesThe number of times no route to a destination was
found.ro Counter .1.3.6.1.4.1.89.12.4.1.1.8 |
ipxBasicSysOutRequestsThe number of IPX packets supplied locally for
transmission, not including any packets counted in
ipxAdvForwPackets.ro Counter .1.3.6.1.4.1.89.12.4.1.1.9 |
ipxBasicSysOutMalformedRequestsThe number of IPX packets supplied locally that contained
errors in their structure.ro Counter .1.3.6.1.4.1.89.12.4.1.1.10 |
ipxBasicSysOutDiscardsThe number of outgoing IPX packets discarded due to
reasons other than those accounted for in
ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered,
and ipxAdvSysOutCompressDiscards.ro Counter .1.3.6.1.4.1.89.12.4.1.1.11 |
ipxBasicSysOutPacketsThe total number of IPX packets transmitted.ro Counter .1.3.6.1.4.1.89.12.4.1.1.12 |
ipxCircuit OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.5 |
ipxCircTableThe Circuit table. SEQUENCE OF IpxCircEntry .1.3.6.1.4.1.89.12.5.1 |
ipxCircEntryEach entry corresponds to one circuit known to the
system. IpxCircEntry .1.3.6.1.4.1.89.12.5.1.1 |
ipxCircSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds. This value may be
written only when creating a new entry in the table.rw INTEGER .1.3.6.1.4.1.89.12.5.1.1.1 |
ipxCircIndexThe identifier of this circuit, unique within the
instance of IPX. This value may be written
only when creating a new entry in the table.rw INTEGER .1.3.6.1.4.1.89.12.5.1.1.2 |
ipxCircExistStateThe validity of this circuit entry. A circuit with this
value set to off may be deleted from the table at the
IPX implementation's discretion.rw Enumeration .1.3.6.1.4.1.89.12.5.1.1.3 |
ipxCircOperStateThe operational state of the circuit.ro Enumeration .1.3.6.1.4.1.89.12.5.1.1.4 |
ipxCircIfIndexThe value of ifIndex for the interface used by this
circuit. This value may be written only when creating
a new entry in the table.rw INTEGER .1.3.6.1.4.1.89.12.5.1.1.5 |
ipxCircNetNumberThe IPX network number of this circuit. This value may
be written only when creating a new entry in the table.rw NetNumber .1.3.6.1.4.1.89.12.5.1.1.6 |
ipxCircTimeToNetThe time to net value associated with this interface, in
term of 1/18ths of a second.rw INTEGER .1.3.6.1.4.1.89.12.5.1.1.7 |
ipxCircEncapsThe encapsulation method associated with this interface.rw Enumeration .1.3.6.1.4.1.89.12.5.1.1.8 |
ipxCircNetbiosDeliverDeliver NetBios All Networks Broadcast Packetsrw Enumeration .1.3.6.1.4.1.89.12.5.1.1.9 |
ipxForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.6 |
ipxDestTableThe Destination table contains information about all
known destinations. SEQUENCE OF IpxDestEntry .1.3.6.1.4.1.89.12.6.1 |
ipxDestEntryEach entry corresponds to one destination. IpxDestEntry .1.3.6.1.4.1.89.12.6.1.1 |
ipxDestSysInstanceThe unique identifier of the instance of IPX
to which this row corresponds.ro INTEGER .1.3.6.1.4.1.89.12.6.1.1.1 |
ipxDestNetNumThe IPX network number of the destination.ro NetNumber .1.3.6.1.4.1.89.12.6.1.1.2 |
ipxDestNextHopCircIndexThe unique identifier of the circuit used to reach the
next hop.rw INTEGER .1.3.6.1.4.1.89.12.6.1.1.3 |
ipxDestProtocolThe routing protocol from which knowledge of this
destination was obtained.ro Enumeration .1.3.6.1.4.1.89.12.6.1.1.4 |
ipxDestTicksThe delay in ticks to reach this destination.rw INTEGER .1.3.6.1.4.1.89.12.6.1.1.5 |
ipxDestHopCountThe number of hops necessary to reach the destination.rw INTEGER .1.3.6.1.4.1.89.12.6.1.1.6 |
ipxDestNextHopNICAddressThe NIC address of the next hop.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.12.6.1.1.7 |
ipxDestNextHopNetNumThe IPX network number of the next hop.rw NetNumber .1.3.6.1.4.1.89.12.6.1.1.8 |
ipxDestExistStateThe validity of this entry. An entry with this
value set to off may be deleted from the table at the
IPX implementation's discretion.rw Enumeration .1.3.6.1.4.1.89.12.6.1.1.9 |
ipxServices OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.7 |
ipxServTableThe table of services, indexed by name and type. SEQUENCE OF IpxServEntry .1.3.6.1.4.1.89.12.7.1 |
ipxServEntryEach entry corresponds to one service. IpxServEntry .1.3.6.1.4.1.89.12.7.1.1 |
ipxServSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.89.12.7.1.1.1 |
ipxServTypeThe service type.rw OCTET STRING .1.3.6.1.4.1.89.12.7.1.1.2 |
ipxServNameThe service name.rw OCTET STRING .1.3.6.1.4.1.89.12.7.1.1.3 |
ipxServProtocolThe protocol from which knowledge of this service was
obtained.ro Enumeration .1.3.6.1.4.1.89.12.7.1.1.4 |
ipxServNetNumThe IPX network number portion of the IPX address of the
service.rw NetNumber .1.3.6.1.4.1.89.12.7.1.1.5 |
ipxServNodeThe node portion of the IPX address of the service.rw OCTET STRING .1.3.6.1.4.1.89.12.7.1.1.6 |
ipxServSocketThe socket portion of the IPX address of the service.rw OCTET STRING .1.3.6.1.4.1.89.12.7.1.1.7 |
ipxServHopCountThe number of hops to the service.rw INTEGER .1.3.6.1.4.1.89.12.7.1.1.8 |
ipxServExistStateThe validity of this entry. An entry with this
value set to off may be deleted from the table at the
IPX implementation's discretion.rw Enumeration .1.3.6.1.4.1.89.12.7.1.1.9 |
ripsap OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.8 |
ripsapSystem OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.8.1 |
ripSysTableThe RIP system table. SEQUENCE OF RipSysEntry .1.3.6.1.4.1.89.12.8.1.1 |
ripSysEntryEach entry corresponds to one instance of RIP
running on the system. RipSysEntry .1.3.6.1.4.1.89.12.8.1.1.1 |
ripSysInstanceThe unique identifier of the instance of RIP to
which this row corresponds. This value links the
instance of RIP to an instance of IPX running on the
system (i.e. the value of ripSysInstance should be the
same as a value of ipxSysInstance). This value may be
written only when creating a new entry in the table.rw INTEGER .1.3.6.1.4.1.89.12.8.1.1.1.1 |
ripSysStateIndicates the operational state of this instance of RIP.rw Enumeration .1.3.6.1.4.1.89.12.8.1.1.1.2 |
ripSysIncorrectPacketsThe number of times that an incorrectly formatted RIP
packet was received.ro Counter .1.3.6.1.4.1.89.12.8.1.1.1.3 |
sapSysTableThe SAP system table. SEQUENCE OF SapSysEntry .1.3.6.1.4.1.89.12.8.1.2 |
sapSysEntryEach entry corresponds to one instance of SAP
running on the system. SapSysEntry .1.3.6.1.4.1.89.12.8.1.2.1 |
sapSysInstanceThe unique identifier of the instance of SAP to
which this row corresponds. This value links the
instance of SAP to an instance of IPX running on the
system (i.e. the value of SApSysInstance should be the
same as a value of ipxSysInstance). This value may be
written only when creating a new entry in the table.rw INTEGER .1.3.6.1.4.1.89.12.8.1.2.1.1 |
sapSysStateIndicates the operational state of this instance of SAP.ro Enumeration .1.3.6.1.4.1.89.12.8.1.2.1.2 |
sapSysIncorrectPacketsThe number of times that an incorrectly formatted SAP
packet was received.ro Counter .1.3.6.1.4.1.89.12.8.1.2.1.3 |
ripsapCircuit OBJECT IDENTIFIER .1.3.6.1.4.1.89.12.8.2 |
ripCircTableThe RIP Circuit table. SEQUENCE OF RipCircEntry .1.3.6.1.4.1.89.12.8.2.1 |
ripCircEntryEach entry corresponds to one circuit known to the
system. RipCircEntry .1.3.6.1.4.1.89.12.8.2.1.1 |
ripCircSysInstanceThe unique identifier of the instance of RIP and IPX
(via ipxSysInstance) to which this entry corresponds.
This value may be written only when creating a new entry in
the table.rw INTEGER .1.3.6.1.4.1.89.12.8.2.1.1.1 |
ripCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the circuit
identifier found in ipxCircIndex. This value may be
written only when creating a new entry in the table.rw INTEGER .1.3.6.1.4.1.89.12.8.2.1.1.2 |
ripCircStateIndicates whether RIP information may be sent/received
over this circuit.rw Enumeration .1.3.6.1.4.1.89.12.8.2.1.1.3 |
ripCircUpdateThe RIP periodic update interval, in seconds.rw INTEGER .1.3.6.1.4.1.89.12.8.2.1.1.4 |
ripCircAgeMultiplierThe holding multiplier for information received in RIP
periodic updates.rw INTEGER .1.3.6.1.4.1.89.12.8.2.1.1.5 |
ripCircOutPacketsThe number of RIP packets sent on this circuit.ro Counter .1.3.6.1.4.1.89.12.8.2.1.1.6 |
ripCircInPacketsThe number of RIP packets received on this circuit.ro Counter .1.3.6.1.4.1.89.12.8.2.1.1.7 |
sapCircTableThe SAP Circuit table. SEQUENCE OF SapCircEntry .1.3.6.1.4.1.89.12.8.2.2 |
sapCircEntryEach entry corresponds to one circuit known to the
system. SapCircEntry .1.3.6.1.4.1.89.12.8.2.2.1 |
sapCircSysInstanceThe unique identifier of the instance of SAP and IPX
(via ipxSysInstance) to which this entry corresponds.
This value may be written only when creating a new entry in
the table.rw INTEGER .1.3.6.1.4.1.89.12.8.2.2.1.1 |
sapCircIndexThe identifier of this circuit, unique within the
instance of SAP. This value corresponds to the circuit
identifier found in ipxCircIndex. This value may be
written only when creating a new entry in the table.rw INTEGER .1.3.6.1.4.1.89.12.8.2.2.1.2 |
sapCircStateIndicates whether SAP information may be sent/received
over this circuit.rw Enumeration .1.3.6.1.4.1.89.12.8.2.2.1.3 |
sapCircUpdateThe SAP periodic update interval, in seconds.rw INTEGER .1.3.6.1.4.1.89.12.8.2.2.1.4 |
sapCircAgeMultiplierThe holding multiplier for information received in SAP
periodic updates.rw INTEGER .1.3.6.1.4.1.89.12.8.2.2.1.5 |
sapCircGetNearestServerReplyIndicates whether to respond to SAP get nearest server
requests received on this circuit.rw Enumeration .1.3.6.1.4.1.89.12.8.2.2.1.6 |
sapCircOutPacketsThe number of SAP packets sent on this circuit.ro Counter .1.3.6.1.4.1.89.12.8.2.2.1.7 |
sapCircInPacketsThe number of SAP packets received on this circuit.ro Counter .1.3.6.1.4.1.89.12.8.2.2.1.8 |
rndFACS OBJECT IDENTIFIER .1.3.6.1.4.1.89.16 |
rndFACSDefaultActionUsed to define the default action for the device, when no
FACS statements applicable to a given frame are defined.rw Enumeration .1.3.6.1.4.1.89.16.1 |
rndFACSActTableThe table of FACS action. SEQUENCE OF RndFACSActEntry .1.3.6.1.4.1.89.16.2 |
rndFACSActEntryEach rndFACSActEntry consist of the following parameters RndFACSActEntry .1.3.6.1.4.1.89.16.2.1 |
rndFACSActTypeThis parameter indicate on which FACS Table the FACS
action will preform.ro Enumeration .1.3.6.1.4.1.89.16.2.1.1 |
rndFACSActIfIndexThe interface to which this FACS entry is applicable.ro INTEGER .1.3.6.1.4.1.89.16.2.1.2 |
rndFACSActionThe management station that sends a SET request for one of these actions
with indexes rndFACSType and rndFACSIfIndex defines the type and the
interface Id for which all FACS statements are to be erased.
If no interface or no type is specified, all FACS statements for a
protocol are erased.rw Enumeration .1.3.6.1.4.1.89.16.2.1.3 |
rndFACSTableThe table of FACS statment. SEQUENCE OF RndFACSEntry .1.3.6.1.4.1.89.16.3 |
rndFACSEntryEach FACS statment consist of the following parameters RndFACSEntry .1.3.6.1.4.1.89.16.3.1 |
rndFACSIfIndexThe interface to which this FACS entry is applicable.ro INTEGER .1.3.6.1.4.1.89.16.3.1.1 |
rndFACSProtocolTypeThis parameter define the protocol the Security Access Control
is applicable.ro Enumeration .1.3.6.1.4.1.89.16.3.1.2 |
rndFACSTypeThe Mode of in which this FACS statement operates.ro Enumeration .1.3.6.1.4.1.89.16.3.1.3 |
rndFACSIndexIndex to the FACS Table.ro INTEGER .1.3.6.1.4.1.89.16.3.1.4 |
rndFACSSrcAddThe size of the octet string will be according to the protocol type define in
rndFACSProtocolType.rw OCTET STRING .1.3.6.1.4.1.89.16.3.1.5 |
rndFACSSrcAddMaskSource-address mask .rw OCTET STRING .1.3.6.1.4.1.89.16.3.1.6 |
rndFACSDesAddDestination-address The size of the octet string will be according to the
protocol type define in rndFACSProtocolType .rw OCTET STRING .1.3.6.1.4.1.89.16.3.1.7 |
rndFACSDesAddMaskDestination-address mask .rw OCTET STRING .1.3.6.1.4.1.89.16.3.1.8 |
rndFACSOperation... .rw Enumeration .1.3.6.1.4.1.89.16.3.1.9 |
rndFACSNetFiltering... .rw Enumeration .1.3.6.1.4.1.89.16.3.1.10 |
rndFACSSoketNumPort/socket number for different applications
0 is default meaning not applicable.rw INTEGER -- {none(1), -- ftp(21), -- telenet(23), -- smtp(25), -- tftp(69), -- snmp(161), -- snmpTrape(162), -- rip(520), -- saPipx(1106), -- ripIPX(1107) -- } .1.3.6.1.4.1.89.16.3.1.11 |
rndFACSMask1IdIndex into RND mask table FACS/COD Type) .rw INTEGER .1.3.6.1.4.1.89.16.3.1.12 |
rndFACSMask2IdIndex into RND mask table FACS/COD according to
the value of rndFACSType .rw INTEGER .1.3.6.1.4.1.89.16.3.1.13 |
rndFACSStatusThe status of a table entry.rw Enumeration .1.3.6.1.4.1.89.16.3.1.14 |
rndBootP OBJECT IDENTIFIER .1.3.6.1.4.1.89.24 |
rndBootPServerAddressThe IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if
this parameter is not equale to 0.0.0.0.rw IpAddress .1.3.6.1.4.1.89.24.1 |
rndBootPRelaySecThresholdBootP requests are relayed only if their SEC field is greater or
equal to the threshold value in order to allow local BootP Servers
to answer first.rw INTEGER .1.3.6.1.4.1.89.24.2 |
ipSpec OBJECT IDENTIFIER .1.3.6.1.4.1.89.26 |
rsIpAddrTableThis table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects. SEQUENCE OF RsIpAddrEntry .1.3.6.1.4.1.89.26.1 |
rsIpAddrEntryThe addressing information for one of this
entity's IP addresses. RsIpAddrEntry .1.3.6.1.4.1.89.26.1.1 |
rsIpAdEntAddrThe IP address to which this entry's addressing
information pertains.ro IpAddress .1.3.6.1.4.1.89.26.1.1.1 |
rsIpAdEntIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.rw INTEGER .1.3.6.1.4.1.89.26.1.1.2 |
rsIpAdEntNetMaskThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.89.26.1.1.3 |
rsIpAdEntForwardIpBroadcastThis variable controls forwarding of IP (sub)net-directed
broadcasts destined for an attached sub(net).rw Enumeration .1.3.6.1.4.1.89.26.1.1.4 |
rsIpAdEntBackupAddrrw IpAddress .1.3.6.1.4.1.89.26.1.1.5 |
rsIpAdEntStatusThe validity of this entry. Invalid indicates that this entry is
invalid in IpAddrTable (MIB II).rw Enumeration .1.3.6.1.4.1.89.26.1.1.6 |
rsIpAdEntBcastAddrIndicates how the host part of ip subnet broadcast messages will be
filled:
0 - host part will be filled by 0
1 - host part will be filled by 1.rw INTEGER .1.3.6.1.4.1.89.26.1.1.7 |
icmpSpec OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.2 |
rsIcmpGenErrMsgEnableThis variable controlls the ability to generate ICMP error messagesrw Enumeration .1.3.6.1.4.1.89.26.2.1 |
rsIcmpRdTableThis table contains ICMP Router Discovery parameters
configurated per IP interface. SEQUENCE OF RsIcmpRdEntry .1.3.6.1.4.1.89.26.2.2 |
rsIcmpRdEntryThe ICMP parameters configurated for IP interface. RsIcmpRdEntry .1.3.6.1.4.1.89.26.2.2.1 |
rsIcmpRdIpAddrThe IP address to which this entry's information pertains.ro IpAddress .1.3.6.1.4.1.89.26.2.2.1.1 |
rsIcmpRdIpAdvertAddrThe IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255.255.255.rw IpAddress .1.3.6.1.4.1.89.26.2.2.1.2 |
rsIcmpRdMaxAdvertIntervalThe maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.
Must be no less than 4 seconds and no greater than 1800
seconds.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.3 |
rsIcmpRdMinAdvertIntervalThe minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no less than 3 seconds and no greater
than rsIcmpRdMaxAdvertInterval.
Default: 0.75 * rsIcmpRdMaxAdvertInterval.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.4 |
rsIcmpRdAdvertLifetimeThe maximum length of time that the advertised addresses
are to be considered as valid. Must be no less than
rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds.
Default: 3 * rsIcmpRdMaxAdvertInterval.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.5 |
rsIcmpRdAdvertiseA flag indicating whether or not the address is to be
advertised.rw Enumeration .1.3.6.1.4.1.89.26.2.2.1.6 |
rsIcmpRdPreferenceLevelThe preferability of the address as a default router
address, relative to other router addresses on the same
subnet.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.7 |
rsIcmpRdEntStatusSetting of any value to this object set values of
all fields to the default values.rw INTEGER .1.3.6.1.4.1.89.26.2.2.1.8 |
rip2Spec OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.3 |
rsRip2IfConfTableThis table is extension of rip2IfConfTable (RFC 1389 ,RIP 2) SEQUENCE OF RsRip2IfConfEntry .1.3.6.1.4.1.89.26.3.1 |
rsRip2IfConfEntry RsRip2IfConfEntry .1.3.6.1.4.1.89.26.3.1.1 |
rsRip2IfConfAddressThe IP Address of this system on the indicated subnet.ro IpAddress .1.3.6.1.4.1.89.26.3.1.1.1 |
rsRip2IfConfVirtualDisThis variable defines the virtual number of hops assigned to
the interface specified by rsIfIpAddrIndex. This enables
fine-tuning of the RIP routing algorithm.rw INTEGER .1.3.6.1.4.1.89.26.3.1.1.2 |
rsRip2IfConfAutoSendThis variable controls RIP automatic send behavior. If enabled
and no routers were heard on the interface, RIP will only send
default route with high metric. Otherwise RIP will send updates
according to configuration.rw Enumeration .1.3.6.1.4.1.89.26.3.1.1.3 |
arpSpec OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.4 |
rsArpDeleteTableSetting this object to any not-null value has the effect of deleting
all entries of the ARP table.rw INTEGER .1.3.6.1.4.1.89.26.4.1 |
rsArpInactiveTimeOutThis variable defines the maximum time period (in second) that can
pass between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table.rw INTEGER .1.3.6.1.4.1.89.26.4.2 |
rsArpProxyWhen ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on a different sub-net,
provided they are it its network table. The router responds
with its own MAC address.
When ARP Proxy is disabled, the router responds only
to ARP requests for its own IP addresses.rw Enumeration .1.3.6.1.4.1.89.26.4.3 |
tftp OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.5 |
rsTftpRetryTimeOutGeneral Retransmission time-out value (seconds)rw INTEGER .1.3.6.1.4.1.89.26.5.1 |
rsTftpTotalTimeOutTotal Retransmission time-out value (seconds)rw INTEGER .1.3.6.1.4.1.89.26.5.2 |
rsSendConfigFileThe file name include path where the Router Server will put the full
configuration. The default destination address will be the sender
address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.26.5.3 |
rsGetConfigFileThe file name include path where the Router Server will get the
configuration. The default source address will be the sender address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.26.5.4 |
rsLoadSoftwareThe file name include path where the Router Server will get the
software. The source address will the sender address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.26.5.5 |
rsFileServerAddressThe IP address of the configuration / sw server.rw IpAddress .1.3.6.1.4.1.89.26.5.6 |
ipRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.6 |
ipRedundAdminStatusThis parameter controle the IP Redundancy in the device.
In case the the parameter in Enable and second router down.
all the traffic hendle by this element.rw Enumeration .1.3.6.1.4.1.89.26.6.1 |
ipRedundOperStatusobsoletero Enumeration .1.3.6.1.4.1.89.26.6.2 |
ipRedundRoutersTableList of IP addresses backed up by this router. SEQUENCE OF IpRedundRoutersEntry .1.3.6.1.4.1.89.26.6.3 |
ipRedundRoutersEntryThe row definition for this table. IpRedundRoutersEntry .1.3.6.1.4.1.89.26.6.3.1 |
ipRedundRoutersIfAddrThe Ip address of the IP interface on which the redundancy feature
is operational.ro IpAddress .1.3.6.1.4.1.89.26.6.3.1.1 |
ipRedundRoutersMainRouterAddrThe Ip address of the polled main router.ro IpAddress .1.3.6.1.4.1.89.26.6.3.1.2 |
ipRedundRoutersOperStatusIf active, the main router is considered inoperational and the IP
interface operates as its backup.ro Enumeration .1.3.6.1.4.1.89.26.6.3.1.3 |
ipRedundRoutersPollIntervalPolling interval for this router (in seconds). If 0 the router is not
polled.rw INTEGER .1.3.6.1.4.1.89.26.6.3.1.4 |
ipRedundRoutersTimeoutInterval in seconds during which the backed-up router must signal.
If it does not signal, it is considered inoperational and the IP
interface starts operating as backup.rw INTEGER .1.3.6.1.4.1.89.26.6.3.1.5 |
ipRedundRoutersStatusEntry statusrw Enumeration .1.3.6.1.4.1.89.26.6.3.1.6 |
ipRouteLeaking OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.7 |
ipLeakStaticToRipThis parameter controls leaking (redistribution) of static routes
to RIP. When enabled, all routes inserted to the IP routing table
via SNMP are advertised into RIP.rw Enumeration .1.3.6.1.4.1.89.26.7.1 |
ipLeakStaticToOspfThis parameter controls leaking (redistribution) of static routes
into OSPF. When enabled, all routes inserted to the IP routing table
via SNMP are advertised into OSPF as external routes.rw Enumeration .1.3.6.1.4.1.89.26.7.2 |
ipLeakOspfToRipThis parameter controls leaking (redistribution) of routes
from OSPF to RIP. If enabled, all routes learned via OSPF
are advertised into RIP.rw Enumeration .1.3.6.1.4.1.89.26.7.3 |
ipLeakRipToOspfThis parameter controls leaking (redistribution) of routes
from RIP to OSPF. If enabled, all routes learned via RIP
are advertised into OSPF as external routes.rw Enumeration .1.3.6.1.4.1.89.26.7.4 |
ipLeakExtDirectToOspfThis parameter controls leaking (redistribution) into OSPF of
direct routes external to OSPF, i.e. routes to local network
corresponding to IP interfaces on which OSPF is disabled.
When enabled, all such direct routes are advertised into OSPF
as external routes.rw Enumeration .1.3.6.1.4.1.89.26.7.5 |
ipRipFilter OBJECT IDENTIFIER .1.3.6.1.4.1.89.26.8 |
rsIpRipFilterGlbTableThe table of RIP global filters per IP router. SEQUENCE OF RsIpRipFilterGlbEntry .1.3.6.1.4.1.89.26.8.1 |
rsIpRipFilterGlbEntryAn entry in the RIP global filter table RsIpRipFilterGlbEntry .1.3.6.1.4.1.89.26.8.1.1 |
rsIpRipFilterGlbTypeType of filter - input/outputro Enumeration .1.3.6.1.4.1.89.26.8.1.1.1 |
rsIpRipFilterGlbNumberNumber of RIP filter.ro INTEGER .1.3.6.1.4.1.89.26.8.1.1.2 |
rsIpRipFilterGlbStatusThe validity of this entry. Setting this value to invalid deletes
the entry, and the entry may be actualy removed from the table.rw Enumeration .1.3.6.1.4.1.89.26.8.1.1.3 |
rsIpRipFilterGlbIpAddrnetwork prefix IP address, as in the forwarding table.rw IpAddress .1.3.6.1.4.1.89.26.8.1.1.4 |
rsIpRipFilterGlbNetworkMaskBitsthe number of bits in the IP Network mask, called network-prefix-length
in Router Requirements terminology. for example: the value 16 means
mask 255.255.0.0rw INTEGER .1.3.6.1.4.1.89.26.8.1.1.5 |
rsIpRipFilterGlbMatchBitsthe number of bits to match in the Network IP address. A value
smaller than 32 defines a wildcard. for example: the value 8 means
all routes whose leftmost 8 bits are equal to those of the network IP
address. If this variable has a value other than 32, than
rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.rw INTEGER .1.3.6.1.4.1.89.26.8.1.1.6 |
rsIpRipFilterGlbActionFilter action - permit/deny for this networkrw Enumeration .1.3.6.1.4.1.89.26.8.1.1.7 |
rsIpRipFilterLclTableTable of input/output RIP filters used per IP Interface. SEQUENCE OF RsIpRipFilterLclEntry .1.3.6.1.4.1.89.26.8.2 |
rsIpRipFilterLclEntryAn entry in the Intf RIP filter table RsIpRipFilterLclEntry .1.3.6.1.4.1.89.26.8.2.1 |
rsIpRipFilterLclIpIntfThe IP address identifying the RIP interface for this filter.
This value corresponds to rsIpAdEntAddr.ro IpAddress .1.3.6.1.4.1.89.26.8.2.1.1 |
rsIpRipFilterLclTypeType of filter - input/outputro Enumeration .1.3.6.1.4.1.89.26.8.2.1.2 |
rsIpRipFilterLclNumberNumber of RIP filter for this Interfacero INTEGER .1.3.6.1.4.1.89.26.8.2.1.3 |
rsIpRipFilterLclStatusThe validity of this entry. Setting this value to invalid deletes
the entry, and the entry may be actualy removed from the table.rw Enumeration .1.3.6.1.4.1.89.26.8.2.1.4 |
rsIpRipFilterLclIpAddrnetwork prefix IP address, as in the forwarding table.rw IpAddress .1.3.6.1.4.1.89.26.8.2.1.5 |
rsIpRipFilterLclNetworkMaskBitsthe number of bits in the IP Network mask, called network-prefix-length
in Router Requirements terminology. for example: the value 16 means
mask 255.255.0.0rw INTEGER .1.3.6.1.4.1.89.26.8.2.1.6 |
rsIpRipFilterLclMatchBitsthe number of bits to match in the Network IP address. A value
smaller than 32 defines a wildcard. for example: the value 8 means
all routes whose leftmost 8 bits are equal to those of the network IP
address. If this variable has a value other than 32, than
rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored.rw INTEGER .1.3.6.1.4.1.89.26.8.2.1.7 |
rsIpRipFilterLclActionFilter action - permit/denyrw Enumeration .1.3.6.1.4.1.89.26.8.2.1.8 |
rsRipEnableEnables or disables RIP.rw Enumeration .1.3.6.1.4.1.89.26.9 |
lreBoxAgentIPrw IpAddress .1.3.6.1.4.1.89.26.10 |
virtualLan OBJECT IDENTIFIER .1.3.6.1.4.1.89.27 |
virtualLanTableAn entry of this table specifies an new ifIndex with a type of
propVirtual(53). SEQUENCE OF VirtualLanEntry .1.3.6.1.4.1.89.27.1 |
virtualLanEntryA list of information for each virtual LAN. VirtualLanEntry .1.3.6.1.4.1.89.27.1.1 |
vlIfIndexAn logical interface number, corresponded this VLrw INTEGER .1.3.6.1.4.1.89.27.1.1.1 |
vlProtoThe protocol, supported by this VL. The meanings of the values are:
other: none of the following. This VL includes any protocol except the
following protocols. It is a bridging VL. RS relies on
a third-party router to exchange traffic between nodes on different
virtual LANs of this type.
IP: This is a routing VL, RS will route between nodes on
different virtual LANs.
IPmulticast: RS will broadcast the message to all the VL's ports. Used for
video-conferencing applications.
ipxRaw: This is a Routing VL, RS will route between nodes on
different virtual LANs.
ipxET: This is a routing VL, RS will route between nodes on
different virtual LANs.
ipxLLC: This is a routing VL, RS will route between nodes on
different virtual LANs.
ipxSNAP: This is a routing VL, RS will route between nodes on
different virtual LANs.
decNET: This is a bridging VL, RS relies on a third-party router
to exchange traffic between nodes on different DECnet virtual
LANs of this type.
netBios: This is a Bridging VL, RS relies on a third-party router
to exchange traffic between nodes on different NetBIOS virtual
LANs of this type.
appleTalk: This is a bridging VL, RS relies on a third-party router
to exchange traffic between nodes on different AppleTalk virtual
LANs of this type.rw Enumeration .1.3.6.1.4.1.89.27.1.1.2 |
vlAutoConfigEnableIt is used only in the case of IP. The meanings of the values are:
true(1): Autolearning is used for this VL
false(2): Autolearning isn't used for this VL from ports, specified in
the table virtualLanAutoConfTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.27.1.1.3 |
vlStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.27.1.1.4 |
vlTyperegular - ordinary type
specBroadcast - for switches that support VLANs as a set of ports and
only as a broadcast domain: broadcast frames do not
cross VLAN's bounders, but unicast frames may be
transmitted between different VLANs. Permits passing
of broadcast frames between Vgate's VLANs.
specArpReq - for switches that support VLANs as a set of ports and
only as a broadcast domain: broadcast frames do not
cross VLAN's bounders, but unicast frames may be
transmitted between different VLANs. Permits passing
of ARP request frames between Vgate's VLANs.
specBroadcastAndUnicast -
for switches that support VLANs as a set of ports
but no frame crosses VLAN's bounders. Permits passing
of IP/ARP request broadcast and IP unicast frames
between Vgate's VLANs.
specArpReqAndUnicast -
for switches that support VLANs as a set of ports
but no frame crosses VLAN's bounders. Permits passing
of ARP request broadcast and IP unicast frames between
Vgate's VLANs. This type can be used only for IP VLANs.rw Enumeration .1.3.6.1.4.1.89.27.1.1.5 |
virtualLanPortsTableFor each VL (a ifIndex with a type of propVirtual(53)) an entry of this
table specifies a set of ports, which it contains. SEQUENCE OF VirtualLanPortEntry .1.3.6.1.4.1.89.27.2 |
virtualLanPortEntryA entry of this table specifies a VL and a port belonging to it VirtualLanPortEntry .1.3.6.1.4.1.89.27.2.1 |
vLIfIndexAn logical interface number, corresponding to this VLrw INTEGER .1.3.6.1.4.1.89.27.2.1.1 |
vLPortIfIndexA physical port belonging to the VL specified by vlIfIndex.rw INTEGER .1.3.6.1.4.1.89.27.2.1.2 |
vLPortTypestatic means configured by user dynamic means autoconfigured by the RSro Enumeration .1.3.6.1.4.1.89.27.2.1.3 |
vLPortStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.27.2.1.4 |
virtualLanAutoConfTableThis table specifies per a routing protocol a set of ports, from which
RS will automatically learning VL in accordance with rules, defined
by the protocol. SEQUENCE OF VirtualLanAutoConfEntry .1.3.6.1.4.1.89.27.3 |
virtualLanAutoConfEntryOne port, specified by vlAutoConfPortIfIndex, for which the RS will
automatically learn its VL in accordance with rules, defined
by the protocol specified in vlAutoConfProto. VirtualLanAutoConfEntry .1.3.6.1.4.1.89.27.3.1 |
vlAutoConfPortIfIndexPort on which the autoconfig option should be supportedrw INTEGER .1.3.6.1.4.1.89.27.3.1.1 |
vlAutoConfProtoProtocol for which the autoconfig option is supported for the port
specified by vlAutoConfPortIfIndexro Enumeration .1.3.6.1.4.1.89.27.3.1.2 |
vlAutoConfStatusIt is used to delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.27.3.1.3 |
virtualLanAutoConfAgingTimeoutThe units of this MIB object is seconds.
Its value can be either 0 or in range 10..65535 .rw INTEGER .1.3.6.1.4.1.89.27.4 |
virtualLanProtocolVlan OBJECT IDENTIFIER .1.3.6.1.4.1.89.27.5 |
virtualLanUserEtherTyperw OCTET STRING .1.3.6.1.4.1.89.27.5.1 |
virtualLanUserMaskrw OCTET STRING .1.3.6.1.4.1.89.27.5.2 |
rsConf OBJECT IDENTIFIER .1.3.6.1.4.1.89.28 |
rsIfConfTableThis table enable the user to add interface to the RS.
RS will automatically add the new interface to the interface Table SEQUENCE OF RsIfConfEntry .1.3.6.1.4.1.89.28.1 |
rsIfConfEntryEach entry defines a configured interface. RsIfConfEntry .1.3.6.1.4.1.89.28.1.1 |
rsIfConfIndexThis variable uniquely identifies the interface.
It is used as a cross reference in other system tablesro INTEGER .1.3.6.1.4.1.89.28.1.1.1 |
rsIfConfTypeThis variable identifies the type of the specific
entry in the rsIfConfTable.
This field is writable only at creation time
(i.e., when value of status is underCreation).rw RsIfType .1.3.6.1.4.1.89.28.1.1.2 |
rsIfConfNameThis variable provides a logical name to a specific entry in
rsIfConfTablerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.28.1.1.3 |
rsIfConfStatusThe status of the ConfigEntry. The choices are those
defined in SNMPv2-TC. Only: active, createAndWait, and destroy
will be used.
active - The conceptual row is available for use by the managed device.
createAndWait - A new instance of a conceptual row is desired, but
not to have it available for use by the managed device.
destroy - Delete all instances associated with an existing conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.28.1.1.4 |
rsTunning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29 |
rsHighPriorityThis variable indicates the time interval the forwarding task inside the
RS works in High Priority Mode.rw INTEGER .1.3.6.1.4.1.89.29.1 |
rsLowPriorityThis variable indicates the time interval the forwarding task inside the
RS works in Low Priority Mode.rw INTEGER .1.3.6.1.4.1.89.29.2 |
rsDbgLevelThis variable indicates the debug level the Router Server works.
the range of this variable is 1..100rw INTEGER .1.3.6.1.4.1.89.29.3 |
rsDiagnosticThis variable will contain some dignostic information in case on a
problem ocurs in the RS functinality.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.29.4 |
rsConfirmMessagTabThis variable enables the operator to confirm all the message in the
event Message Table.rw INTEGER .1.3.6.1.4.1.89.29.5 |
eventMessageTableThe Event Message table of the agent SEQUENCE OF EventMessageEntry .1.3.6.1.4.1.89.29.6 |
eventMessageEntryThe row definition for this table. EventMessageEntry .1.3.6.1.4.1.89.29.6.1 |
eventNumThe event number,the index of this table.ro INTEGER .1.3.6.1.4.1.89.29.6.1.1 |
eventDescThe event discription, this text will include time and severity.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.29.6.1.2 |
reaTunning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.7 |
reaIpRemoteAgingTimeThis variable specifies aging time used by the REA for remote
entries in the Ip Fast Forwarding Table.rw INTEGER .1.3.6.1.4.1.89.29.7.1 |
reaFftHashMaxChainThis variable specifies the maximum length of hash chains in
the Fast Forwarding Tables.rw INTEGER .1.3.6.1.4.1.89.29.7.2 |
reaMltcstBitOnrw Enumeration .1.3.6.1.4.1.89.29.7.3 |
reaIpForwardEnableThe Platform will perform fast IP forwarding if only if this
variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.4 |
reaIpxForwardEnableThe Platform will perform fast IPX forwarding if only if this
variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.5 |
reaBridgeEnableThe Platform will perform bridging if only if this
variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.6 |
reaFacsEnableThe RS and Platform will perform FASC if only if this
variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.7 |
reaIpForwardDatagramsThe number of IP datagrams have been forwarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.8 |
reaIpInDiscardsThe number of IP datagrams have been dicarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.9 |
reaIpxForwardDatagramsThe number of IPX datagrams have been forwarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.10 |
reaIpxInDiscardsThe number of IP datagrams have been dicarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.11 |
reaBridgeFftTableThe Bridge Fast Forwarding Table SEQUENCE OF ReaBridgeFftEntry .1.3.6.1.4.1.89.29.7.12 |
reaBridgeFftEntryThe row definition for this table. ReaBridgeFftEntry .1.3.6.1.4.1.89.29.7.12.1 |
reaBrgFftEntryNumro INTEGER .1.3.6.1.4.1.89.29.7.12.1.1 |
reaBrgFftMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.12.1.2 |
reaBrgFftReNumro INTEGER .1.3.6.1.4.1.89.29.7.12.1.3 |
reaBrgFftPortNumro INTEGER .1.3.6.1.4.1.89.29.7.12.1.4 |
reaBrgFftFacsSrcIndexro INTEGER .1.3.6.1.4.1.89.29.7.12.1.5 |
reaBrgFftFacsDstIndexro INTEGER .1.3.6.1.4.1.89.29.7.12.1.6 |
reaBrgDiscardsThe number of bridging datagrams have been discarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.13 |
reaBrgForwardsThe number of bridging datagrams have been forwarded by the Platform.ro Counter .1.3.6.1.4.1.89.29.7.14 |
reaIpFftTableThe IP Fast Forwarding Table SEQUENCE OF ReaIpFftEntry .1.3.6.1.4.1.89.29.7.15 |
reaIpFftEntryThe row definition for this table. ReaIpFftEntry .1.3.6.1.4.1.89.29.7.15.1 |
reaIpFftEntryNumro INTEGER .1.3.6.1.4.1.89.29.7.15.1.1 |
reaIpFftDstIpAddrro IpAddress .1.3.6.1.4.1.89.29.7.15.1.2 |
reaIpFftDstIpMaskro IpAddress .1.3.6.1.4.1.89.29.7.15.1.3 |
reaIpFftRangeTypero Enumeration .1.3.6.1.4.1.89.29.7.15.1.4 |
reaIpFftSrcMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.15.1.5 |
reaIpFftDstMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.15.1.6 |
reaIpFftReNumro INTEGER .1.3.6.1.4.1.89.29.7.15.1.7 |
reaIpFftPortNumro INTEGER .1.3.6.1.4.1.89.29.7.15.1.8 |
reaIpFftFacsSrcIndexro INTEGER .1.3.6.1.4.1.89.29.7.15.1.9 |
reaIpFftFacsDstIndexro INTEGER .1.3.6.1.4.1.89.29.7.15.1.10 |
reaIpFftApplFlagsA bit mask that defines the applications associated with this entry:
__________________________________________
| Byte 1|Byte 2 |Byte 3 | ....|Byte 20 |
|87654321| | 87654321|
|________|_______________________________|
Byte1 :
bit1: Server Dispatcher Clientro OCTET STRING .1.3.6.1.4.1.89.29.7.15.1.11 |
reaIpxFftTableThe IPX Fast Forwarding Table SEQUENCE OF ReaIpxFftEntry .1.3.6.1.4.1.89.29.7.16 |
reaIpxFftEntryThe row definition for this table. ReaIpxFftEntry .1.3.6.1.4.1.89.29.7.16.1 |
reaIpxFftEntryNumro INTEGER .1.3.6.1.4.1.89.29.7.16.1.1 |
reaIpxFftDstNetidro INTEGER .1.3.6.1.4.1.89.29.7.16.1.2 |
reaIpxFftRangeTypero Enumeration .1.3.6.1.4.1.89.29.7.16.1.3 |
reaIpxFftSrcMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.16.1.4 |
reaIpxFftDstMacAddrro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.16.1.5 |
reaIpxFftReNumro INTEGER .1.3.6.1.4.1.89.29.7.16.1.6 |
reaIpxFftPortNumro INTEGER .1.3.6.1.4.1.89.29.7.16.1.7 |
reaIpxFftFacsSrcIndexro INTEGER .1.3.6.1.4.1.89.29.7.16.1.8 |
reaIpxFftFacsDstIndexro INTEGER .1.3.6.1.4.1.89.29.7.16.1.9 |
lreVnResposibilityTableThe Bridge Responsibility Table SEQUENCE OF LreVnResposibilityEntry .1.3.6.1.4.1.89.29.7.17 |
lreVnResposibilityEntryThe row definition for this table. LreVnResposibilityEntry .1.3.6.1.4.1.89.29.7.17.1 |
lreVnRespVnrw INTEGER .1.3.6.1.4.1.89.29.7.17.1.1 |
lreVnRespStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.29.7.17.1.2 |
reaSrcViolationEnableThe Platform will perform the Source Port Violation Procedure
if only if this variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.18 |
reaSrcViolationTrapEnableThe RS will send the Source Port Violation TRAP messages
if only if this variable's value is enable.rw Enumeration .1.3.6.1.4.1.89.29.7.19 |
reaSrcAddrValidationEnableThe Platform will verify the source address of incoming
IP datagram.rw Enumeration .1.3.6.1.4.1.89.29.7.20 |
reaRsQueueDiscardsro Counter .1.3.6.1.4.1.89.29.7.21 |
reaBufFreeThe number of free buffers.ro INTEGER .1.3.6.1.4.1.89.29.7.22 |
lreResetDstMacBit46rw Enumeration .1.3.6.1.4.1.89.29.7.23 |
lreQueSourceSelectrw Enumeration .1.3.6.1.4.1.89.29.7.24 |
lreResetDstMacBit47rw Enumeration .1.3.6.1.4.1.89.29.7.25 |
rsMaxEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8 |
rsMaxBridgeForwardingEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.1 |
rsMaxBrgFrwEntriesMaximal number of entries in bridge forwarding table.ro INTEGER .1.3.6.1.4.1.89.29.8.1.1 |
rsMaxBrgFrwEntriesAfterResetFuture maximal number of entries in bridge forwarding table.rw INTEGER .1.3.6.1.4.1.89.29.8.1.2 |
rsMaxIpForwardingEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.2 |
rsMaxIpFrwEntriesMaximal number of entries in Ip forwarding table.ro INTEGER .1.3.6.1.4.1.89.29.8.2.1 |
rsMaxIpFrwEntriesAfterResetFuture maximal number of entries in Ip forwarding table.rw INTEGER .1.3.6.1.4.1.89.29.8.2.2 |
rsMaxArpEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.3 |
rsMaxArpEntriesMaximal number of entries in Arp forwarding table.ro INTEGER .1.3.6.1.4.1.89.29.8.3.1 |
rsMaxArpEntriesAfterResetFuture maximal number of entries in Arp forwarding table.rw INTEGER .1.3.6.1.4.1.89.29.8.3.2 |
rsMaxIpxForwardingEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.4 |
rsMaxIpxFrwEntriesMaximal number of entries in Ipx forwarding table.ro INTEGER .1.3.6.1.4.1.89.29.8.4.1 |
rsMaxIpxFrwEntriesAfterResetFuture maximal number of entries in Ipx forwarding table.rw INTEGER .1.3.6.1.4.1.89.29.8.4.2 |
rsMaxIpxSapEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.5 |
rsMaxIpxSapEntriesMaximal number of entries in IpxSap table.ro INTEGER .1.3.6.1.4.1.89.29.8.5.1 |
rsMaxIpxSapEntriesAfterResetFuture maximal number of entries in IpxSap table.rw INTEGER .1.3.6.1.4.1.89.29.8.5.2 |
rsMaxDspClntEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.6 |
rsMaxDspClntEntriesMaximal number of entries in rsSdClientsTable.ro INTEGER .1.3.6.1.4.1.89.29.8.6.1 |
rsMaxDspClntEntriesAfterResetFuture maximal number of entries in rsSdClientsTable.rw INTEGER .1.3.6.1.4.1.89.29.8.6.2 |
rsMaxZeroHopRoutEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.7 |
rsMaxZhrConnsThe current maximal number of direct Zero-hop routing
connections.ro INTEGER .1.3.6.1.4.1.89.29.8.7.1 |
rsMaxZhrConnsAfterResetThe future (after reset) maximal number of direct Zero-hop routing
connections.rw INTEGER .1.3.6.1.4.1.89.29.8.7.2 |
rsMaxDspFrmEntriesTuning OBJECT IDENTIFIER .1.3.6.1.4.1.89.29.8.8 |
rsMaxDspFrmEntriesMaximal number of entries in rsSdClientsTable.ro INTEGER .1.3.6.1.4.1.89.29.8.8.1 |
rsMaxDspFrmEntriesAfterResetFuture maximal number of entries in rsSdClientsTable.rw INTEGER .1.3.6.1.4.1.89.29.8.8.2 |
rndApplications OBJECT IDENTIFIER .1.3.6.1.4.1.89.35 |
rsServerDispatcher OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.1 |
rndMidLevelManagement OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2 |
rndAlarmOptions OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2.2 |
rndAlarmEnablingIndicates whether alarms should be issued to the high-level
NMSrw Enumeration .1.3.6.1.4.1.89.35.2.2.1 |
rndAlarmIntervalIndicates the minimal period of time which must pass after issuing
an alarm before issuing the same alarm again.rw INTEGER .1.3.6.1.4.1.89.35.2.2.2 |
rndMonitoredElementsTableThe table of monitored elements of the network SEQUENCE OF RndMonitoredElementEntry .1.3.6.1.4.1.89.35.2.3 |
rndMonitoredElementEntryThe row definition for this table. RndMonitoredElementEntry .1.3.6.1.4.1.89.35.2.3.1 |
rndMonitoredElementAddressThe IP address of the monitored elementro IpAddress .1.3.6.1.4.1.89.35.2.3.1.1 |
rndMonitoredElementCommunityThe community of the monitored elementrw DisplayString .1.3.6.1.4.1.89.35.2.3.1.2 |
rndMonitoredElementLabelThe label assigned by the network manager to the monitored elementrw DisplayString .1.3.6.1.4.1.89.35.2.3.1.3 |
rndDefaultPollingIntervalThe default period of time between two consecutive pollings of the
monitored element for the value of an object instance. If no other polling
interval is specifically assigned to the monitored object instance, this
one will be usedrw INTEGER .1.3.6.1.4.1.89.35.2.3.1.4 |
rndDefaultLogFileThe default file path of the log-file which will contain the polling
results for the monitored element. If no other file path is specifically
assigned to the monitored object instance, this log-file will be used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.3.1.5 |
rndMonitoredElementStatusIt is used to manage the monitored elements table and indicates
the current monitoring status of an element.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.3.1.6 |
rndMonitoringTableThe table of monitored object instances. Each monitored object instance
belongs to a monitored element previously entered in the
rndMonitoredElementsTable. SEQUENCE OF RndMonitoringEntry .1.3.6.1.4.1.89.35.2.4 |
rndMonitoringEntryThe row definition for this table. RndMonitoringEntry .1.3.6.1.4.1.89.35.2.4.1 |
rndMonitoredElementA label assigned by the network manager to a monitored element to
which this monitored object instance belongs. This label must have
been previously entered in an instance of rndMonitoredElementLabelro DisplayString .1.3.6.1.4.1.89.35.2.4.1.1 |
rndMonitoredObjectInstanceLabelThe label assigned by the network manager to the monitored object instancero DisplayString .1.3.6.1.4.1.89.35.2.4.1.2 |
rndMonitoredObjectNameThe symbolic object type name of the object to which the monitored object
instance belongs (as it appears the MIB module definition). In case of
ambiguity the <MIB module name> : <object type name> format should be used.
An instance of rndMonitoredObjectName need not be assigned any value, if
the corresponding instance of rndMonitoredObjectIdentifier is assigned a
value, since any one of these, together with the object instance
identifier, suffices to unambigously identify the monitored object
instance.rw DisplayString .1.3.6.1.4.1.89.35.2.4.1.3 |
rndMonitoredObjectIdentifierThe object identifier of the object to which the monitored object
instance belongs.
An instance of rndMonitoredObjectIdentifier need not be assigned any value, if
the corresponding instance of rndMonitoredObjectName is assigned a value,
since any one of these, together with the object instance identifier,
suffices to unambigously identify the monitored object instance.rw OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2.4.1.4 |
rndMonitoredObjectInstanceThe instance identifier (key) of the monitored object instance.rw OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2.4.1.5 |
rndMonitoredObjectSyntaxThe syntax of the monitored object instance (i.e., the syntax of the object
type of the object to which the monitored instance belongs).
Need not be assigned any value if the corresponding instance of
rndMonitoredObjectName has been assigned a valuerw Enumeration .1.3.6.1.4.1.89.35.2.4.1.6 |
rndMonitoringIntervalThe period of time between two consecutive retrievals of the monitored
object instance's value.rw INTEGER .1.3.6.1.4.1.89.35.2.4.1.7 |
rndAlarmMaxTresholdThe value of the monitored object instance, the exceeding of which
will cause the generation of an alarm to the high-level management
station.rw INTEGER .1.3.6.1.4.1.89.35.2.4.1.8 |
rndAlarmMinTresholdIf the value of the monitored object instance falls below the value
assigned to rndAlarmMinTreshold, an alarm to the high-level management
station will be issued.rw INTEGER .1.3.6.1.4.1.89.35.2.4.1.9 |
rndMonitoringLogfileThe entire path of the file in which the results of the monitoring
of this object instance should be recorded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.4.1.10 |
rndMonitoringEntryStatusIt is used to manage the monitored object instances table and
indicates the current monitoring status of an object instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.4.1.11 |
rndMibFilesTableThe table of monitored object instances. Each monitored object instance
belongs to a monitored element previously entered in the
rndMonitoredElementsTable. SEQUENCE OF RndMibFileEntry .1.3.6.1.4.1.89.35.2.5 |
rndMibFileEntryThe row definition for this table. RndMibFileEntry .1.3.6.1.4.1.89.35.2.5.1 |
rndMibFileIndexThe number of the MIB file in the list MIB files supported by the
Mid-Level management station. The order of the MIB files in this
list must reflect the the IMPORT relation between the MIBS contained
in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing
MIB A must have a lesser index in this table than the file containing
MIB B.ro INTEGER .1.3.6.1.4.1.89.35.2.5.1.1 |
rndMibFilePathThe path of the MIB file in the MIB file server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.5.1.2 |
rndMibFileRefreshIndicates if the file should be fetched after setting this entry from the
MIB file server.rw Enumeration .1.3.6.1.4.1.89.35.2.5.1.3 |
rndMibFileEntryStatusIt is used to manage the MIB files table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.5.1.4 |
rndHardwareConfigurationIndicates whether the current SET SNMP PDU contains hardware
configuration (i.e., normally read-only variables). SET of such
variables in the Mid-level management station will be allowed only
if this variable is included in the SNMP PDU and its value is true.
Its value as returned in a GET SNMP PDU will always be false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.6 |
rndEraseSimulatedConfigurationeraseSimulatedConfiguration instructs the MLNMS to erase all the
simulated configuration from its configuration data-base (CDB). This
the only accepted value for SNMP SET statements and will never be
returned in SNMP GET statements.
simulatedConfigurationPresent indicates that the MLNMS currently has
a simulated configuration.
simulatedConfigurationErased indicates that the MLNMS currently has
no simulated configuration.rw Enumeration .1.3.6.1.4.1.89.35.2.7 |
rndDeleteValuesTableThis table indicates which MIB variables are row status fields which
control the status of the entry to which they belong. This table also
indicates which (integer!) value of these MIB variables will cause, if
present in a SNMP SET PDU, the deletion of the conceptual row instance
to which the SET MIB variable instance belongs. SEQUENCE OF RndDeleteValuesEntry .1.3.6.1.4.1.89.35.2.8 |
rndDeleteValuesEntryThe row definition for the rndDeleteValuesTable table. RndDeleteValuesEntry .1.3.6.1.4.1.89.35.2.8.1 |
rndRowStatusVariableNameThe name of the row status field. This name may not necessarily be any
name which is present in the MIBs loaded into the MLNMS station.rw DisplayString .1.3.6.1.4.1.89.35.2.8.1.1 |
rndRowStatusObjectIdThe object id of the row status field. If the rndRowStatusVariableName is
a name present in the MIBs loaded into the MLNMS, this MIB
variable is not required, but if given, it must match the object id known
to the MLNMS.
The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId
must be a read-write MIB variable of type INTEGER which belongs to an
entry (i.e, is a child of a MIB variable of type SEQUENCE).rw OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.2.8.1.2 |
rndRowDeleteValueThe value of the variable identified by rndRowStatusVariableName and/or
rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause
the deletion of the conceptual row instance which the SET MIB variable
instance belongs.rw INTEGER .1.3.6.1.4.1.89.35.2.8.1.3 |
rndDeleteValueEntryStatusIt is used to delete an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.2.8.1.4 |
rsIpZeroHopRouting OBJECT IDENTIFIER .1.3.6.1.4.1.89.35.3 |
rsIpZhrGeneralStatusThis parameter enables or disables the IP Zero Hop Routing feature
for all IP interfaces. The IP Zero Hop Routing feature can also be
enabled or disabled on each IP interface through the
rsIpZhrStatusTable.rw Enumeration .1.3.6.1.4.1.89.35.3.1 |
rsIpZhrAgingTimeoutThis parameter controls the aging time-out in seconds of direct
connections which were allocated. The virtual IP address of a direct
connection whose time-out has expired is eligible for allocation to a
different connection.rw INTEGER .1.3.6.1.4.1.89.35.3.2 |
rsIpZhrStatusTableThe administrative status of the ZHR feature per ip interface. SEQUENCE OF RsIpZhrStatusEntry .1.3.6.1.4.1.89.35.3.3 |
rsIpZhrStatusEntryAn entry in the ZHR status table. RsIpZhrStatusEntry .1.3.6.1.4.1.89.35.3.3.1 |
rsIpZhrStatusIpIntfThe Ip interface whose ZHR feature status is accessed.ro IpAddress .1.3.6.1.4.1.89.35.3.3.1.1 |
rsIpZhrAdminStatusIt is used to control whether ZHR will operate on the interface.rw Enumeration .1.3.6.1.4.1.89.35.3.3.1.2 |
rsIpZhrVirtAddressTableThe table of free virtual IP addresses which may be allocated
to establish direct connections - Per IP Interface. SEQUENCE OF RsIpZhrVirtAddressEntry .1.3.6.1.4.1.89.35.3.4 |
rsIpZhrVirtAddressEntryAn entry in the ZHR virtual IP addresses table RsIpZhrVirtAddressEntry .1.3.6.1.4.1.89.35.3.4.1 |
rsIpZhrVirtAddressIpIntfThe Ip Interface to which the IP addresses in this entry are allocated.ro IpAddress .1.3.6.1.4.1.89.35.3.4.1.1 |
rsIpZhrVirtAddressToThe last free IP address in the block.ro IpAddress .1.3.6.1.4.1.89.35.3.4.1.2 |
rsIpZhrVirtAddressFromThe first free IP address in the block.rw IpAddress .1.3.6.1.4.1.89.35.3.4.1.3 |
rsIpZhrVirtAddressStatusIt is used to manage the virtual address table.
The supported actions will be active, createAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.3.4.1.4 |
rsIpZhrConnectionsTableTable of the currently active direct connections. SEQUENCE OF RsIpZhrConnectionEntry .1.3.6.1.4.1.89.35.3.5 |
rsIpZhrConnectionEntryAn entry in the ZHR Connection table RsIpZhrConnectionEntry .1.3.6.1.4.1.89.35.3.5.1 |
rsIpZhrConnectionIpIntfThe IP Interface for which this direct connection was established.ro IpAddress .1.3.6.1.4.1.89.35.3.5.1.1 |
rsIpZhrConnectionSrcIpThe source IP Address of this direct connection.ro IpAddress .1.3.6.1.4.1.89.35.3.5.1.2 |
rsIpZhrConnectionDestIpThe destination IP Address of this direct connection.ro IpAddress .1.3.6.1.4.1.89.35.3.5.1.3 |
rsIpZhrConnectionVirtualIpThe virtual IP address allocated for this direct connection.ro IpAddress .1.3.6.1.4.1.89.35.3.5.1.4 |
rsIpZhrConnectionTypeThe type of this direct connection.
dynamic - established by the RS.
disabled - established by the RS.
The RS detected that the virtual address is already used as
destination by the source BEFORE its allocation, and therefore
marked this connection as 'disabled' to prevent a future
allocation of this virtual address to this source.
static - established by user.ro Enumeration .1.3.6.1.4.1.89.35.3.5.1.5 |
rsIpZhrConnectionAgeThe age of the connection in seconds.ro INTEGER .1.3.6.1.4.1.89.35.3.5.1.6 |
rsIpZhrConnectionStatusIt is used to manage the connections table.
The supported actions will be active, createAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.35.3.5.1.7 |