OMNI-gx2OSW10B-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for OMNI-gx2OSW10B-MIB.
174
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
174 total| Object Name |
|---|
trapOSW10BConfigChangeIntegerThis trap is issued if configuration of a single variable
with integer type was changed (via ANY interface).
TrapChangedValueInteger variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.1 |
trapOSW10BConfigChangeDisplayStringThis trap is issued if configuration of a single variable
with DispalayString type was changed (via ANY interface).
TrapChangedValueDisplayString variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.2 |
trapOSW10BOpticalInputAlarmThis trap is issued when the Switch Control signals
go out of range.
trapAdditionalInfoInteger variable contains current reading of
this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.3 |
trapOSW10BFanCurrentAlarmThis trap is issued when the Fan Current
parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.4 |
trapOSW10BModuleTempAlarmThis trap is issued when the Temperature goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.5 |
trapOSW10BFlashAlarmThis trap is issued when the detects an error during
Flash memory operations. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.6 |
trapOSW10BBankBootAlarmThis trap is issued when the detects an error while booting
from bank 0 or bank 1. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.7 |
trapOSW10BCaliDataCRCAlarmThis trap is issued when the optical calibration table corrupted. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.8 |
trapOSW10BFactoryDataCRCAlarmThis trap is issued when the Factory Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.9 |
trapOSW10BAlarmDataCRCAlarmThis trap is issued when the Alarm Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.10 |
trapOSW10BInputSwitchedAlarmThis trap is issued when the Optical input switched. This is info only alarm, unit nothing wrong TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.11 |
trapOSW10BResetFactoryDefaultAlarmThis trap is issued when the Factory Default Reset occurs. This is info only TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.12 |
trapOSW10BSecondaryInputActiveAlarmThis trap is issued when the secondary input becomes active. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.13 |
trapOSW10BPriOpticInputAlarmThis trap is issued when primary optical input out of range. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.14 |
trapOSW10BSecOpticInputAlarmThis trap is issued when Sec optical input out of range. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.15 |
trapOSW10BHardwareErrorAlarmThis trap is issued when hardware error happens. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.15.0.16 |
gx2Osw10bDescriptor OBJECT IDENTIFIER .1.3.6.1.4.1.1166.6.1.2.15.1 |
gx2Osw10bAnalogTableThis table contains gx2Osw10b specific parameters with
nominal and current values. SEQUENCE OF Gx2Osw10bAnalogEntry .1.3.6.1.4.1.1166.6.1.2.15.2 |
gx2Osw10bAnalogEntryThis list contains the analog parameters and descriptions. Gx2Osw10bAnalogEntry .1.3.6.1.4.1.1166.6.1.2.15.2.1 |
gx2Osw10bAnalogTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.2.1.1 |
osw10blabelPriOpticalInputLevelThe value of this object provides the label of the
Primary Optical Input Level Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.2 |
osw10buomPriOpticalInputLevelThe value of this object provides the Unit of Measure of the
Primary Optical Input Level Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.3 |
osw10bmajorHighPriOpticalInputLevelThe value of this object provides the Major High alarm value
of the Primary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.4 |
osw10bmajorLowPriOpticalInputLevelThe value of this object provides the Major Low alarm value
of the Primary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.5 |
osw10bminorHighPriOpticalInputLevelThe value of this object provides the Minor High alarm value
of the Primary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.6 |
osw10bminorLowPriOpticalInputLevelThe value of this object provides the Minor Low alarm value
of the Primary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.7 |
osw10bcurrentValuePriOpticalInputLevelThe value of this object provides the Current value
of the Primary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.8 |
osw10bstateFlagPriOpticalInputLevelThe value of this object provides the state
of the Primary Optical Input Level Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.9 |
osw10bminValuePriOpticalInputLevelThe value of this object provides the minimum value
the Primary Optical Input Level Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.10 |
osw10bmaxValuePriOpticalInputLevelThe value of this object provides the maximum value
the Primary Optical Input Level Analog parameter can achieve.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.11 |
osw10balarmStatePriOpticalInputLevelThe value of this object provides the current alarm state of
the Primary Optical Input Level Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.12 |
osw10blabelSecOpticalInputLevelThe value of this object provides the label of the
Secondary Optical Input Level Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.13 |
osw10buomSecOpticalInputLevelThe value of this object provides the Unit of Measure of the
Secondary Optical Input Level Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.14 |
osw10bmajorHighSecOpticalInputLevelThe value of this object provides the Major High alarm value
of the Secondary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.15 |
osw10bmajorLowSecOpticalInputLevelThe value of this object provides the Major Low alarm value
of the Secondary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.16 |
osw10bminorHighSecOpticalInputLevelThe value of this object provides the Minor High alarm value
of the Secondary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.17 |
osw10bminorLowSecOpticalInputLevelThe value of this object provides the Minor Low alarm value
of the Secondary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.18 |
osw10bcurrentValueSecOpticalInputLevelThe value of this object provides the Current value
of the Secondary Optical Input Level Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.19 |
osw10bstateFlagSecOpticalInputLevelThe value of this object provides the state
of the Secondary Optical Input Level Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.20 |
osw10bminValueSecOpticalInputLevelThe value of this object provides the minimum value
the Secondary Optical Input Level Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.21 |
osw10bmaxValueSecOpticalInputLevelThe value of this object provides the maximum value
the Secondary Optical Input Level Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.22 |
osw10balarmStateSecOpticalInputLevelThe value of this object provides the curent alarm state of
the Secondary Optical Input Level Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.23 |
osw10blabelPriOpticalThresholdThe value of this object provides the label of the
Primary Optical Input Threshold Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.24 |
osw10buomPriOpticalThresholdThe value of this object provides the Unit of Measure of the
Primary Optical Input Threshold Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.25 |
osw10bmajorHighPriOpticalThresholdThe value of this object provides the Major High alarm value
of the Primary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.26 |
osw10bmajorLowPriOpticalThresholdThe value of this object provides the Major Low alarm value
of the Primary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.27 |
osw10bminorHighPriOpticalThresholdThe value of this object provides the Minor High alarm value
of the Primary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.28 |
osw10bminorLowPriOpticalThresholdThe value of this object provides the Minor Low alarm value
of the Primary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.29 |
osw10bcurrentValuePriOpticalThresholdThe value of this object provides the Current value
of the Primary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.rw Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.30 |
osw10bstateFlagPriOpticalThresholdThe value of this object provides the state
of the Primary Optical Input Threshold Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.31 |
osw10bminValuePriOpticalThresholdThe value of this object provides the minimum value
the Primary Optical Input Threshold Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.rw Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.32 |
osw10bmaxValuePriOpticalThresholdThe value of this object provides the maximum value
the Primary Optical Input Threshold Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.33 |
osw10balarmStatePriOpticalThresholdThe value of this object provides the curent alarm state of
the Primary Optical Threshold Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.34 |
osw10blabelSecOpticalThresholdThe value of this object provides the label of the
Secondary Optical Input Threshold Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.35 |
osw10buomSecOpticalThresholdThe value of this object provides the Unit of Measure of the
Secondary Optical Input Threshold Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.36 |
osw10bmajorHighSecOpticalThresholdThe value of this object provides the Major High alarm value
of the Secondary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.37 |
osw10bmajorLowSecOpticalThresholdThe value of this object provides the Major Low alarm value
of the Secondary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.38 |
osw10bminorHighSecOpticalThresholdThe value of this object provides the Minor High alarm value
of the Secondary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.39 |
osw10bminorLowSecOpticalThresholdThe value of this object provides the Minor Low alarm value
of the Secondary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.40 |
osw10bcurrentValueSecOpticalThresholdThe value of this object provides the Current value
of the Secondary Optical Input Threshold Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.rw Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.41 |
osw10bstateFlagSecOpticalThresholdThe value of this object provides the state
of the Secondary Optical Input Threshold Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.42 |
osw10bminValueSecOpticalThresholdThe value of this object provides the minimum value
the Secondary Optical Input Threshold Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.43 |
osw10bmaxValueSecOpticalThresholdThe value of this object provides the maximum value
the Secondary Optical Input Threshold Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.44 |
osw10balarmStateSecOpticalThresholdThe value of this object provides the curent alarm state of
the Secondary Optical Threshold Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.45 |
osw10blabelModTempThe value of this object provides the label of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.46 |
osw10buomModTempThe value of this object provides the Unit of Measure of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.47 |
osw10bmajorHighModTempThe value of this object provides the Major High alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.48 |
osw10bmajorLowModTempThe value of this object provides the Major Low alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.49 |
osw10bminorHighModTempThe value of this object provides the Minor High alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.50 |
osw10bminorLowModTempThe value of this object provides the Minor Low alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.51 |
osw10bcurrentValueModTempThe value of this object provides the Current value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.52 |
osw10bstateFlagModTempThe value of this object provides the state
of the Module Temperature Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.53 |
osw10bminValueModTempThe value of this object provides the minimum value
the Module Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.54 |
osw10bmaxValueModTempThe value of this object provides the maximum value
the Module Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.55 |
osw10balarmStateModTempThe value of this object provides the curent alarm state of
the Module Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.56 |
osw10blabelFanCurrentThe value of this object provides the label of the
Fan Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.57 |
osw10buomFanCurrentThe value of this object provides the Unit of Measure of the
Fan Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.2.1.58 |
osw10bmajorHighFanCurrentThe value of this object provides the Major High alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.59 |
osw10bmajorLowFanCurrentThe value of this object provides the Major Low alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.60 |
osw10bminorHighFanCurrentThe value of this object provides the Minor High alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.61 |
osw10bminorLowFanCurrentThe value of this object provides the Minor Low alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.62 |
osw10bcurrentValueFanCurrentThe value of this object provides the Current value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.63 |
osw10bstateFlagFanCurrentThe value of this object provides the state
of the Fan Current Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.64 |
osw10bminValueFanCurrentThe value of this object provides the minimum value
the Fan Current Analog parameter can achieve.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.65 |
osw10bmaxValueFanCurrentThe value of this object provides the maximum value
the Fan Current Analog parameter can achieve.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.15.2.1.66 |
osw10balarmStateFanCurrentThe value of this object provides the current alarm state of
the Fan Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.2.1.67 |
gx2Osw10bDigitalTableThis table contains gx2Osw10b specific parameters with
nominal and current values. SEQUENCE OF Gx2Osw10bDigitalEntry .1.3.6.1.4.1.1166.6.1.2.15.3 |
gx2Osw10bDigitalEntryThis list contains digital parameters and descriptions. Gx2Osw10bDigitalEntry .1.3.6.1.4.1.1166.6.1.2.15.3.2 |
gx2Osw10bDigitalTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.3.2.1 |
osw10blabelSwitchControlThe value of this object provides the label of the
Switch Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.2 |
osw10benumSwitchControlThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.3 |
osw10bvalueSwitchControlThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.4 |
osw10bstateflagSwitchControlThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.5 |
osw10blabelSwitchModeThe value of this object provides the label of the
Switch Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.6 |
osw10benumSwitchModeThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.7 |
osw10bvalueSwitchModeThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.8 |
osw10bstateflagSwitchModeThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.9 |
osw10blabelRevertModeThe value of this object provides the label of the
Revert Mode Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.10 |
osw10benumRevertModeThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.11 |
osw10bvalueRevertModeThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.12 |
osw10bstateflagRevertModeThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.13 |
osw10blabelRevertTimeThe value of this object provides the label of the
Revert Time Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.14 |
osw10benumRevertTimeThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.15 |
osw10bvalueRevertTimeThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.16 |
osw10bstateflagRevertTimeThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.17 |
osw10blabelWavelengthThe value of this object provides the label of the
Wavelength Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.18 |
osw10benumWavelengthThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.19 |
osw10bvalueWavelengthThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.20 |
osw10bstateflagWavelengthThe value of this object provides the state
of the the parameter. (0-Hiden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.21 |
osw10blabelSwitchMonitorThe value of this object provides the label of the
Switch State Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.22 |
osw10benumSwitchMonitorThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.23 |
osw10bvalueSwitchMonitorThe value of this object is the current value of the parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.24 |
osw10bstateflagSwitchMonitorThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.25 |
osw10blabelOperationModeThe value of this object provides the label of the
Switch State Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.26 |
osw10benumOperationModeThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.27 |
osw10bvalueOperationModeThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.28 |
osw10bstateflagOperationModeThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.29 |
osw10blabelFactoryDefaultThe value of this object provides the label of the
Factory Default Reset Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.30 |
osw10benumFactoryDefaultThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.3.2.31 |
osw10bvalueFactoryDefaultThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.32 |
osw10bstateflagFactoryDefaultThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.3.2.33 |
gx2Osw10bStatusTableThis table contains gx2Osw10b specific parameters with
nominal and current values. SEQUENCE OF Gx2Osw10bStatusEntry .1.3.6.1.4.1.1166.6.1.2.15.4 |
gx2Osw10bStatusEntryThis list contains Status parameters and descriptions. Gx2Osw10bStatusEntry .1.3.6.1.4.1.1166.6.1.2.15.4.3 |
gx2Osw10bStatusTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.4.3.1 |
osw10blabelBootThe value of this object provides the label of the
Boot Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.2 |
osw10bvalueBootThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.3 |
osw10bstateflagBootThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.4 |
osw10blabelFlashThe value of this object provides the label of the
Flash Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.5 |
osw10bvalueFlashThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.6 |
osw10bstateflagFlashThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.7 |
osw10blabelFactoryDataCRCThe value of this object provides the label of the
Factory Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.8 |
osw10bvalueFactoryDataCRCThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.9 |
osw10bstateflagFactoryDataCRCThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.10 |
osw10blabelCalibrateTableStatusThe value of this object provides the label of optical input calibration table status descriptionro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.11 |
osw10bvalueCalibrateTableStatusThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.12 |
osw10bstateflagCalibrateTableStatusThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.13 |
osw10blabelAlarmDataCrcThe value of this object provides the label of the
Alarm Data Crc parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.14 |
osw10bvalueAlarmDataCrcThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.15 |
osw10bstateflagAlarmDataCrcThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.16 |
osw10blabelInputStatusThe value of this object provides the label of the
Input Status parameter.roobsolete DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.17 |
osw10bvalueInputStatusThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).roobsolete Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.18 |
osw10bstateflagInputStatusThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).roobsolete Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.19 |
osw10blabelPriActiveStatusThe value of this object provides the label of the
Primary Active Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.20 |
osw10bvaluePriActiveStatusThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.21 |
osw10bstateflagPriActiveStatusThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.22 |
osw10blabelHardwareErrThe value of this object provides the label of the
Primary Active Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.23 |
osw10bvalueHardwareErrThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.24 |
osw10bstateflagHardwareErrThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.25 |
osw10blabelPriThresholdStatusThe value of this object provides the label of the
Primary Input Below The Threshold Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.26 |
osw10bvaluePriThresholdStatusThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.27 |
osw10bstateflagPriThresholdStatusThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.28 |
osw10blabelSecThresholdStatusThe value of this object provides the label of the
Primary Input Below The Threshold Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.4.3.29 |
osw10bvalueSecThresholdStatusThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.30 |
osw10bstateflagSecThresholdStatusThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.4.3.31 |
gx2Osw10bFactoryTableThis table contains gx2Osw10b specific parameters with
nominal and current values. SEQUENCE OF Gx2Osw10bFactoryEntry .1.3.6.1.4.1.1166.6.1.2.15.5 |
gx2Osw10bFactoryEntryThis list contains Factory parameters and descriptions. Gx2Osw10bFactoryEntry .1.3.6.1.4.1.1166.6.1.2.15.5.4 |
gx2Osw10bFactoryTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.1 |
osw10bbootControlByteThe value of this object indicates which bank the firmware
is currently being boot from.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.2 |
osw10bbootStatusByteThis object indicates the status of the last bootro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.3 |
osw10bbank1CRCThis object provides the CRC code of bank 0.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.4 |
osw10bbank2CRCThis object provides the CRC code of bank 1.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.5 |
osw10bprgEEPROMByteThis object indicates if the EEPROM has been programmedro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.6 |
osw10bfactoryCRCThis object provides the CRC code for the Factory data.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.7 |
osw10bcalculateCRCThis object indicates which of the Enums will have the CRC calculated.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.15.5.4.8 |
osw10bhourMeterThis object provides the hour meter reading of the module.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.9 |
osw10bflashPrgCntAThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.10 |
osw10bflashPrgCntBThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.5.4.11 |
osw10bflashBankARevThis object provides the revision of flash bank 0.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.5.4.12 |
osw10bflashBankBRevThis object provides the revision of flash bank 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.15.5.4.13 |
gx2Osw10bHoldTimeTableThis table contains gx2Osw10b specific parameters with
nominal and current values. SEQUENCE OF Gx2Osw10bHoldTimeEntry .1.3.6.1.4.1.1166.6.1.2.15.6 |
gx2Osw10bHoldTimeEntryThis list contains digital product class and the
associated RF channel parameters and descriptions. Gx2Osw10bHoldTimeEntry .1.3.6.1.4.1.1166.6.1.2.15.6.5 |
rxgx2Osw10bHoldTimeTableIndexThe value of this object is the index of the data object.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.6.5.1 |
rxgx2Osw10bHoldTimeSpecIndexThe value of this object identifies the index of the alarm object to be modified.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.15.6.5.2 |
rxgx2Osw10bHoldTimeDataThe value of this object provides access to the hold timers used
to suppress nose on analog objects. This object is a 32 bit object.
Validation data is entered into bytes zero and one of the object.
Bytes three and four are used to entering the hold time for the
specified alarm object. The Hold timer data ranges from 0 to 1300 seconds.
The index of this object corresponds to the alarm object to be modified.
Alarm Hold timers correspond to the index of this object as follows:
Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx,
The hold time is represented in seconds.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.15.6.5.3 |