OMNI-gx2CM-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
276
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
276 total| Object Name |
|---|
trapCMConfigChangeIntegerThis trap is issued if configuration of a single variable
with integer type was changed (via ANY interface).
TrapChangedValueInteger variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.3.0.1 |
trapCMConfigChangeDisplayStringThis trap is issued if configuration of a single variable
with DispalayString type was changed (via ANY interface).
TrapChangedValueDisplayString variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.3.0.2 |
trapCMModuleTempAlarmThis trap is issued when the Module Temperature parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.3.0.3 |
trapCMEEPROMAlarmThis trap is issued when the EEPROM detectes an error.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.3.0.4 |
trapCMFlashAlarmThis trap is issued when the Flash device detects an error.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.3.0.5 |
trapCMHardwareAlarmThis trap is issued when the system hardware detectes an error.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.3.0.6 |
trapCMInitEEPROMAlarmThis trap is issued when the there is an EEPROM initializing error.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.3.0.7 |
trapCMBootAlarmThis trap is issued when the there is a boot error.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.3.0.8 |
gx2cmDescriptor OBJECT IDENTIFIER .1.3.6.1.4.1.1166.6.1.2.3.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1166.6.1.2.3.1 |
gx2cmFactoryTableThis table contains gx2Cm specific parameters with
nominal and current values. SEQUENCE OF Gx2cmFactoryEntry .1.3.6.1.4.1.1166.6.1.2.3.2 |
gx2cmFactoryEntryThis list contains Factory data and the
associated parameter descriptions. Gx2cmFactoryEntry .1.3.6.1.4.1.1166.6.1.2.3.2.1 |
gx2cmFactoryTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.1 |
bootControlByteThe value of this object indicates which bank the firmware
is currently being boot from.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.2 |
bootStatusByteThis object indicates the status of the last bootro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.3 |
bank0CRCThis object provides the CRC code of bank 1.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.4 |
bank1CRCThis object provides the CRC code of bank 2.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.5 |
prgEEPROMByteThis object indicates if the EEPROM has been programmedro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.6 |
factoryCRCThis object provides the CRC code for the Factory data.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.7 |
calculateCRCThis object provides the CRC value of the fimware.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.8 |
hourMeterThis object provides the hour meter reading of the module.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.9 |
flashPrgCnt0This object provides the number of times the flash has been
programmed on side A.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.10 |
flashPrgCnt1This object provides the number of times the flash has been
programmed on side B.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.2.1.11 |
flashBank0This object provides the firmware revision of the firmware in bank 0.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.2.1.12 |
flashBank1This object provides the firmware revision of the firmware in bank 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.2.1.13 |
localMacAddThis object provides the local mac address numberro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.2.1.14 |
netWorkMacAddThis object provides the network mac address number.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.2.1.15 |
gx2cmNetworkTableThis table contains gx2Cm specific parameters with
nominal and current values. SEQUENCE OF Gx2cmNetworkEntry .1.3.6.1.4.1.1166.6.1.2.3.3 |
gx2cmNetworkEntryThis list contains Network parameters and the
associated parameter descriptions. Gx2cmNetworkEntry .1.3.6.1.4.1.1166.6.1.2.3.3.2 |
gx2cmNetworkTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.3.2.1 |
labelLocalEthIPAddThis object provides the label for the Ethernet IP Address field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.2 |
valueLocalEthIPAddThis object provides the Local Ethernet IP Address for the
Control Module.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.3 |
labelLocalEthMaskThis object provides the label for the Local Ethernet Mask field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.4 |
valueLocalEthMaskThis object provides the Local Ethernet Mask value.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.5 |
labelNetworkEthAddThis object provides the label for the Network Ethernet Address .ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.6 |
valueNetworkEthAddThis object provides the value of the Network Ethernet Address.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.7 |
labelNetworkEthMaskThis object provides the label for the Network Mask Address.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.8 |
valueNetworkEthMaskThis object provides the value of the Network Mask Address.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.9 |
labelShelfSerialNumThis object provides the label for the Shelf Serial Number.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.10 |
valueShelfSerialNumThis object provides the value for the Shelf Serial Number.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.11 |
labelGateWayIPAddThis object provides the label for the Gateway IP address.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.12 |
valueGateWayIPAddThis object provides the value for the IP address for the Gateway.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.13 |
labelTrapDestinationThis object provides the label the trap destination field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.14 |
valueTrapDestinationThis object provides the address for the trap destination.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.15 |
labelTFTPserverThis object provides the label the TFTP Server address field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.16 |
valueTFTPserverThis object provides the address for the TFTP Server.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.17 |
labelTrap2DestinationThis object provides the label the second trap destination field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.18 |
valueTrap2DestinationThis object provides the address for the second trap destination.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.19 |
labelTrap3DestinationThis object provides the label the third trap destination field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.20 |
valueTrap3DestinationThis object provides the address for the third trap destination.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.21 |
labelTrap4DestinationThis object provides the label the fourth trap destination field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.22 |
valueTrap4DestinationThis object provides the address for the fourth trap destination.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.23 |
labelTrap5DestinationThis object provides the label the fifth trap destination field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.24 |
valueTrap5DestinationThis object provides the address for the fifth trap destination.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.25 |
labelISDNModeThis object provides the label for the ISDN mode setting.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.26 |
valueISDNModeThis object provides the value for the ISDN mode setting.
In order to activate the ISDN feature, the user must set
the ISDN mode to ON and provide a valid IP address. This address
needs to be the IP address of the remote ISDN Modem.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.3.2.27 |
labelISDNModemIPAddressThis object provides the label for the ISDN modem IP Address.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.28 |
valueISDNModemIPAddressThis object provides the value for the ISDN modem IP Address. This Address is used by the control Module
to ping the remote ISDN modem to determine if an ISDN connection is made. Only after a successful ping response
to this address and the ISDN Modem Mode object is set to ON will the Control Module send traps.
Factory default value is 0.0.0.0.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.29 |
labelISDNTrapTimeoutThis object provides the label for the ISDN modem Timeout object.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.30 |
valueISDNTrapTimeoutThis object provides the value for the ISDN modem Timeout.
The value of this object sets the time period that the communication
link is open for sending traps. This timer is started when the first trap is issued.
The factory default for this value is 2 minutes. Unit of measure is in seconds.rw INTEGER (0 .. 3600) .1.3.6.1.4.1.1166.6.1.2.3.3.2.31 |
labelISDNPingTimeoutThis object provides the label for the ISDN ping timeout object.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.32 |
valueISDNPingTimeoutThis object provides the value for the ISDN ping timeout.
Factory default value is 500 ms. User should set this
value in milli-secondrw INTEGER (100 .. 5000) .1.3.6.1.4.1.1166.6.1.2.3.3.2.33 |
labelISDNBackoffTimerThis object provides the label for the ISDN backoff timer object.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.3.2.34 |
valueISDNBackoffTimerThis object provides the value for the ISDN backoff timer.
The value in this object is a hold period used to prevent traps from being sent.
It is used to allow other chassis to have time to connect and communicate over the ISDN modems.
This hold period starts after the valueISDNTrapTimeout period has expired.
NOTE: The value of this object should be set to a value greater than the ISDN Modem's idle connection timeout period.
This will allow the Modem to break the ISDN Connection.
Factory default value is 2 min (120 sec). User should set this
value in secondsrw INTEGER (0 .. 3600) .1.3.6.1.4.1.1166.6.1.2.3.3.2.35 |
gx2cmAnalogTableThis table contains gx2Cm specific parameters with
nominal and current values. SEQUENCE OF Gx2cmAnalogEntry .1.3.6.1.4.1.1166.6.1.2.3.4 |
gx2cmAnalogEntryThis list contains analog parameters and the
associated parameter descriptions. Gx2cmAnalogEntry .1.3.6.1.4.1.1166.6.1.2.3.4.3 |
gx2cmTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.4.3.1 |
labelModTempThe value of this object provides the label of the
Module Temp parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.4.3.2 |
uomModTempThe value of this object provides the Unit of Measure of the
Module Temp parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.4.3.3 |
majorHighModTempThe value of this object provides the Major High alarm value
of the Module Temp parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.3.4.3.4 |
majorLowModTempThe value of this object provides the Major Low alarm value
of the Module Temp parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.3.4.3.5 |
minorHighModTempThe value of this object provides the Minor High alarm value
of the Module Temp parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.3.4.3.6 |
minorLowModTempThe value of this object provides the Minor Low alarm value
of the Module Temp parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.3.4.3.7 |
currentValueModTempThe value of this object provides the Current value
of the Module Temp parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.3.4.3.8 |
stateFlagModTempThe value of this object provides the state
of the Module Temp parameter. (0-Hidden
1-Read-Only, 2-Updateable)ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.4.3.9 |
minValueModTempThe value of this object provides the minimum value
the Module Temp parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.3.4.3.10 |
maxValueModTempThe value of this object provides the maximum value
the Module Temp parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.3.4.3.11 |
alarmStateModTempThe value of this object provides the curent alarm state of
the Module Temp Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.4.3.12 |
gx2cmDigitalTableThis table contains gx2Cm specific parameters with
nominal and current values. SEQUENCE OF Gx2cmDigitalEntry .1.3.6.1.4.1.1166.6.1.2.3.5 |
gx2cmDigitalEntryThis list contains digital parameters and the
associated parameter descriptions. Gx2cmDigitalEntry .1.3.6.1.4.1.1166.6.1.2.3.5.4 |
gx2cmDigitalTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.5.4.1 |
labelRemoteLocalThe value of this object provides the label of the
Remote Local Control Digital parameter.roobsolete DisplayString .1.3.6.1.4.1.1166.6.1.2.3.5.4.2 |
enumRemoteLocalThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated value is
separated by a common. The first value has a enumerated value of 1.roobsolete DisplayString .1.3.6.1.4.1.1166.6.1.2.3.5.4.3 |
valueRemoteLocalThe value of this object is the current value of the parameter.rwobsolete Enumeration .1.3.6.1.4.1.1166.6.1.2.3.5.4.4 |
stateFlagRemoteLocalThe value of this object provides the state
of the Remote Local Control Digital parameter. (0-Hidden
1-Read-Only, 2-Updateable).roobsolete Enumeration .1.3.6.1.4.1.1166.6.1.2.3.5.4.5 |
labelResetSlotThe value of this object provides the label of the
Reset Slot Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.5.4.6 |
enumResetSlotThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated value is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.5.4.7 |
valueResetSlotThe value of this object is the current value of the parameter.
A write to this object will casue a hardware reset. 0-control module
1-18 selected slot.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.5.4.8 |
stateResetSlotThe value of this object provides the state
of the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.5.4.9 |
labelIdShelfThe value of this object provides the label of the
identify shelf Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.5.4.10 |
enumIdShelfThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated value is
separated by a common. The first value has a enumerated value of 1..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.5.4.11 |
valueIdShelfThe value of this object is the current value of the parameter.
Writing any non zero value to this parameter will casue the CM to blink its front panel LED.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.5.4.12 |
stateFlagIdShelfThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.5.4.13 |
labelResetAlarmThe value of this object provides the label of the
Reset Alarms Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.5.4.14 |
enumResetAlarmThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated value is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.5.4.15 |
valueResetAlarmThe value of this object is the current value of the parameter.
Writing any non-zero value to this object will case the CM to
reset shelf alarm processing.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.5.4.16 |
stateFlagResetAlarmThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.5.4.17 |
gx2cmStatusTableThis table contains gx2Cm specific parameters with
nominal and current values. SEQUENCE OF Gx2cmStatusEntry .1.3.6.1.4.1.1166.6.1.2.3.6 |
gx2cmStatusEntryThis list contains status parameters and the
associated parameter descriptions. Gx2cmStatusEntry .1.3.6.1.4.1.1166.6.1.2.3.6.5 |
gx2cmStatusTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.6.5.1 |
labelShelfAlarmThe value of this object provides the label of the
Shelf Alarm Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.6.5.2 |
valueShelfAlarmThe value of this object provides the current status of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.3 |
stateShelfAlarmThe value of this object provides the current state of
the parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.4 |
labelDataCrcThe value of this object provides the label of the
Data CRC parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.6.5.5 |
valueDataCrcThe value of this object provides the current status of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.6 |
stateDataCrcThe value of this object provides the current state of
the parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.7 |
labelFlashStatusThe value of this object provides the label of the
Flash Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.6.5.8 |
valueFlashStatusThe value of this object provides the current status of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.9 |
stateFlashStatusThe value of this object provides the current state of
the parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.10 |
labelBootStatusThe value of this object provides the label of the
Boot Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.6.5.11 |
valueBootStatusThe value of this object provides the current status of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.12 |
stateBootStatusThe value of this object provides the current state of
the parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.13 |
labelAlmLimCrcThe value of this object provides the label of the
Alarm limit CRC parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.6.5.14 |
valueAlmLimCrcThe value of this object provides the current status of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.15 |
stateAlmLimCrcThe value of this object provides the current state of
the parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.6.5.16 |
gx2cmAMCTableThis table contains gx2Cm specific parameters with
nominal and current values. SEQUENCE OF Gx2cmAMCEntry .1.3.6.1.4.1.1166.6.1.2.3.7 |
gx2cmAMCEntryThis list contains the AMC parameters and the
associated parameter descriptions. Gx2cmAMCEntry .1.3.6.1.4.1.1166.6.1.2.3.7.6 |
gx2cmAMCTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.1 |
valueAMCslot1This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.2 |
serialAMCslot1This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.3 |
agentIDAMCslot1This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.4 |
valueAMCslot2This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.5 |
serialAMCslot2This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.6 |
agentIDAMCslot2This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.7 |
valueAMCslot3This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.8 |
serialAMCslot3This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.9 |
agentIDAMCslot3This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.10 |
valueAMCslot4This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.11 |
serialAMCslot4This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.12 |
agentIDAMCslot4This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.13 |
valueAMCslot5This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.14 |
serialAMCslot5This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.15 |
agentIDAMCslot5This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.16 |
valueAMCslot6This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.17 |
serialAMCslot6This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.18 |
agentIDAMCslot6This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.19 |
valueAMCslot7This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.20 |
serialAMCslot7This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.21 |
agentIDAMCslot7This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.22 |
valueAMCslot8This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.23 |
serialAMCslot8This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.24 |
agentIDAMCslot8This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.25 |
valueAMCslot9This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.26 |
serialAMCslot9This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.27 |
agentIDAMCslot9This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.28 |
valueAMCslot10This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.29 |
serialAMCslot10This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.30 |
agentIDAMCslot10This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.31 |
valueAMCslot11This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.32 |
serialAMCslot11This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.33 |
agentIDAMCslot11This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.34 |
valueAMCslot12This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.35 |
serialAMCslot12This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.36 |
agentIDAMCslot12This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.37 |
valueAMCslot13This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.38 |
serialAMCslot13This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.39 |
agentIDAMCslot13This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.40 |
valueAMCslot14This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.41 |
serialAMCslot14This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.42 |
agentIDAMCslot14This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.43 |
valueAMCslot15This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.44 |
serialAMCslot15This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.45 |
agentIDAMCslot15This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.46 |
valueAMCslot16This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.47 |
serialAMCslot16This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.48 |
agentIDAMCslot16This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.49 |
valueAMCslot17This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.50 |
serialAMCslot17This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.51 |
agentIDAMCslot17This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.52 |
valueAMCslot18This object provides control to enable or disable AMC for the
current device in the slot.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.53 |
serialAMCslot18This object provides the serial number for the AMC slot selected.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.7.6.54 |
agentIDAMCslot18This object provides the agentID of the AMC parameter for the selected slot.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.7.6.55 |
autoQuickSwapCntThis object sets the time interval as to when the Control Module will update
its memory with quick swap data. The Control Module will enable the quick swap feature for each
module in the system. It will then retrieve the quick swap data from each module.
The timer settings are as follows:
1=timeroff, 2=onehour, 3=oneday, 4=oneweek.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.7.6.56 |
gx2cmSecurityTableThis table contains gx2Cm specific parameters with
nominal and current values. SEQUENCE OF Gx2cmSecurityEntry .1.3.6.1.4.1.1166.6.1.2.3.8 |
gx2cmSecurityEntryThis list contains Security parameters and the
associated parameter descriptions. Gx2cmSecurityEntry .1.3.6.1.4.1.1166.6.1.2.3.8.7 |
gx2cmSecurityTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.8.7.1 |
labelSecurityModeThis object provides the label for the Current Security Mode.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.2 |
enumSecurityModeThe value of this object represents the Enumeration values
possible for the security mode parameter. Each Enumerated value is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.3 |
valueSecurityModeThis object indicates the current Security Mode.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.8.7.4 |
stateSecurityModeThis object indicates the state of the Security Mode parameter .ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.8.7.5 |
labelPasswordThis object provides the label for the Password field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.6 |
valuePasswordThis object provides the value for the Password.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.7 |
statePasswordThis object provides the state of the password field.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.8.7.8 |
labelFactoryChgStringThis object provides the lable for the Factory Change String field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.9 |
valueFactoryChgStringThis object provides the value for the Factory Change String.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.10 |
stateFactoryChgStringThis object provides the state of the Factory Change String field.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.8.7.11 |
labelOperatorChgStringThis object provides the lable for the Operator Change String field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.12 |
valueOperatorChgStringThis object provides the value for the Operator Change String.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.13 |
stateOperatorChgStringThis object provides the state of the Operator Change String field.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.8.7.14 |
labelReadOnlyChgStringThis object provides the lable for the Read Only Change String field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.15 |
valueReadOnlyChgStringThis object provides the value for the Read Only Change String.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.16 |
stateReadOnlyChgStringThis object provides the state of the Read Only Change String field.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.8.7.17 |
labelRemoteOnlyChgStringThis object provides the lable for the Remote Only Change String field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.18 |
valueRemoteOnlyChgStringThis object provides the value for the Remote Only Change String.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.19 |
stateRemoteOnlyChgStringThis object provides the state of the Remote Only Change String field.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.8.7.20 |
labelLocalOnlyChgStringThis object provides the lable for the Local Only Change String field.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.21 |
valueLocalOnlyChgStringThis object provides the value for the Local Only Change String.rw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.8.7.22 |
stateLocalOnlyChgStringThis object provides the state of the Local Only Change String field.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.3.8.7.23 |
gx2cmDiagnosticTableThis table contains gx2Cm specific parameters with
nominal and current values. SEQUENCE OF Gx2cmDiagnosticEntry .1.3.6.1.4.1.1166.6.1.2.3.9 |
gx2cmDiagnosticEntryThis list contains Diagnostic parameters and the
associated parameter descriptions. Gx2cmDiagnosticEntry .1.3.6.1.4.1.1166.6.1.2.3.9.8 |
gx2cmDiagnosticTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.1 |
ledTestValueThis object provides the LED test pattern on/off control.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.9.8.2 |
bpTestCntThe value of this object control which slot the alarm poll command
will be repeatedly sent to. During this operation normal polling is disabled.
0-off, 1-18 selects the slot.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.3 |
successTransSlot1This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.4 |
successTransSlot2This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.5 |
successTransSlot3This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.6 |
successTransSlot4This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.7 |
successTransSlot5This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.8 |
successTransSlot6This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.9 |
successTransSlot7This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.10 |
successTransSlot8This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.11 |
successTransSlot9This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.12 |
successTransSlot10This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.13 |
successTransSlot11This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.14 |
successTransSlot12This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.15 |
successTransSlot13This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.16 |
successTransSlot14This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.17 |
successTransSlot15This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.18 |
successTransSlot16This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.19 |
successTransSlot17This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.20 |
successTransSlot18This object provides data on the number of time writing to the selected
slot passes.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.21 |
failureTransSlot1This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.22 |
failureTransSlot2This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.23 |
failureTransSlot3This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.24 |
failureTransSlot4This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.25 |
failureTransSlot5This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.26 |
failureTransSlot6This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.27 |
failureTransSlot7This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.28 |
failureTransSlot8This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.29 |
failureTransSlot9This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.30 |
failureTransSlot10This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.31 |
failureTransSlot11This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.32 |
failureTransSlot12This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.33 |
failureTransSlot13This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.34 |
failureTransSlot14This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.35 |
failureTransSlot15This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.36 |
failureTransSlot16This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.37 |
failureTransSlot17This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.38 |
failureTransSlot18This object provides data on the number of time writing to the selected
slot fails.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.39 |
fanTestModeThis object provides control for putting the fan in manual
test mode. Writing any non-zero value will set to onrw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.40 |
fanControlThis object provides control over the fan mode.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.9.8.41 |
relayTestModeThis object provides control for putting the relay in manual
test mode. Writing any non-zero value will set to onrw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.42 |
relayControlThis object provides control for putting the relay in manual
test mode.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.9.8.43 |
slotPollModeThis object provides control of the slotpoll test mode.
When on the slotpoll operation is disabled.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.9.8.44 |
bootCountThis object provides the value of how many times the CM went
though a boot/rest process.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.45 |
objectTableDataThis object provides the OID for the start loations for the
status, digital and analog tables. This data is used by the web
server application.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.9.8.46 |
setSysTimeWriting any value to this object will reset sysUpTime to zero.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.9.8.47 |
gx2cmDownloadTableThis table contains gx2Cm specific parameters with
nominal and current values. SEQUENCE OF Gx2cmDownloadEntry .1.3.6.1.4.1.1166.6.1.2.3.10 |
gx2cmDownloadEntryThis list contains Download parameters and the
associated parameter descriptions. Gx2cmDownloadEntry .1.3.6.1.4.1.1166.6.1.2.3.10.9 |
gx2cmDownloadTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.10.9.1 |
downloadValueThis object provides the slot(s) to be downloaded. The slots to be downloaded
corresponds to the following bit map. bit 0 - control module, bits 1-18 to the
corresponding slot. Any combination of bit may be set. If all bits are reset this
will halt the download.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.10.9.2 |
autoDownloadResetThis object determines if the module will be reset directly after a successfull download.
0 - Deactivated, 1+ Activatedrw Enumeration .1.3.6.1.4.1.1166.6.1.2.3.10.9.3 |
downloadFilenameThis object provides the name of the file for downloadrw DisplayString .1.3.6.1.4.1.1166.6.1.2.3.10.9.4 |
downloadStateThis object provides the current state of the download process.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.10.9.5 |
switchFwBankWritting to this object causes the firmware bank to switch and execute from that bank.
The range of values that can be entered for this object is from 0 to 18. Where 0 is
slot 0, and 18 is slot 18.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.3.10.9.6 |
cmTrapHistoryTableThis table contains the trap specific parameters. SEQUENCE OF CmTrapHistoryEntry .1.3.6.1.4.1.1166.6.1.2.3.11 |
cmTrapHistoryEntryThis list contains Trap History parameters and the
associated parameter descriptions. CmTrapHistoryEntry .1.3.6.1.4.1.1166.6.1.2.3.11.10 |
cmTrapHistoryTableIndexThis object identifies the trap issued by the
network element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.1 |
netrapIdThe value of this objest is the trap ID number
provided by network element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.2 |
netrapNetworkElemModelNumberThe value of this object is the model number of
the network element. Combination of Model # and Serial # is used as
the unique identifier of the NE.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.11.10.3 |
netrapNetworkElemSerialNumThe value of this object is the serial number of
the network element.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.11.10.4 |
netrapPerceivedSeverityThis parameter defines five severity levels, which provide
an indication of the perceived status of the managed object.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.5 |
netrapNetworkElemOperStateThe current Operational State of the Network Element
which generated the trap..ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.6 |
netrapNetworkElemAlarmStatusThe current Alarm Status of the Network Element.
Alarm Status is always equal to the highest severity
level of all outstanding alarms in this NE..ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.7 |
netrapNetworkElemAdminStateThe current Adminsitrative state of the network element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.8 |
netrapNetworkElemAvailStatusThe current Operational state of the network elmentro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.9 |
netrapTextThis variable contains trap text.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.11.10.10 |
netrapLastTrapTimeStampThis OBJECT IDENTIFIER is used to hold time when trap was generated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1166.6.1.2.3.11.10.11 |
netrapChangedObjectIdThis variable identifies the object that
has generated the trap.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.11.10.12 |
netrapAdditionalInfoInteger1This 32 bit integer is used to hold specific information about
the trap.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.13 |
netrapAdditionalInfoInteger2this 32 bit integer is used to hold specific information about
the trap.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.14 |
netrapAdditionalInfoInteger3This 32 bit integer is used to hold specific information about
the trap.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.15 |
netrapChangedValueDisplayStringThis DisplayString is used to hold specific information about
the trapro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.11.10.16 |
netrapChangedValueOIDThis OBJECT IDENTIFIER is used to hold specific information about
the trapro DisplayString .1.3.6.1.4.1.1166.6.1.2.3.11.10.17 |
netrapChangedValueIpAddressThis OBJECT IDENTIFIER is used to hold specific information about
the trap.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.18 |
netrapChangedValueIntegerthis 32 bit integer is used to hold the data value that this object has been
changed too.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.3.11.10.19 |