OMNI-gx2Lm1000s-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
157
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
157 total| Object Name |
|---|
trapLM1000SConfigChangeIntegerThis trap is issued if configuration of a single variable
with integer type was changed (via ANY interface).
TrapChangedValueInteger variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.1 |
trapLM1000SConfigChangeDisplayStringThis trap is issued if configuration of a single variable
with DispalayString type was changed (via ANY interface).
TrapChangedValueDisplayString variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.2 |
trapLM1000SfanCurrentAlarmThis trap is issued when the Fan Current
parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.3 |
trapLM1000SModuleTempAlarmThis trap is issued when the Module Temperature parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.4 |
trapLM1000SomiOffsetAlarmThis trap is issued when the OMI Offset goes out of range. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.5 |
trapLM1000StecCurrentAlarmThis trap is issued when the TEC Current parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.6 |
trapLM1000SLaserCurrentAlarmThis trap is issued when the Laser Current parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.7 |
trapLM1000SLaserTempAlarmThis trap is issued when the Laser Temp parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.8 |
trapLM1000SLaserPowerAlarmThis trap is issued when the Laser Power parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.9 |
trapLM1000SFlashAlarmThis trap is issued when the Laser Modules detects an error during
Flash memory operations. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.10 |
trapLM1000SBankBootAlarmThis trap is issued when the Laser Modules detects an error while booting
from bank 0 or bank 1. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.11 |
trapLM1000SAlarmDataCRCAlarmThis trap is issued when the Alarm Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.12 |
trapLM1000SFactoryDataCRCAlarmThis trap is issued when the Factory Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.13 |
trapLM1000SCalDataCRCAlarmThis trap is issued when the Cal Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.14 |
trapLM1000SResetFacDefaultThis trap is issued when the LM1000S resets to factory defaults TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.15 |
trapLM1000SUserRFOffAlarmThis trap is issued when the the User RF is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.16 |
trapLM1000SUserOpticalOffAlarmThis trap is issued when the User Optical Power is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.17 |
trapLM1000SUserSBSOffAlarmThis trap is issued when the User SBS is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.18 |
trapLM1000SRFInputAlarmThis trap is issued when the Laser Modules RF input parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.19 |
trapLM1000SRFOverloadAlarmThis trap is issued when the Laser Modules RF overload parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.31.0.20 |
gx2Lm1000sDescriptor OBJECT IDENTIFIER .1.3.6.1.4.1.1166.6.1.2.31.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1166.6.1.2.31.1 |
gx2Lm1000sAnalogTableThis table contains gx2Lm1000s specific parameters with
nominal and current values. SEQUENCE OF Gx2Lm1000sAnalogEntry .1.3.6.1.4.1.1166.6.1.2.31.2 |
gx2Lm1000sAnalogEntryThis list contains the analog parameters and descriptions. Gx2Lm1000sAnalogEntry .1.3.6.1.4.1.1166.6.1.2.31.2.1 |
gx2Lm1000sAnalogTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.2.1.1 |
lm1000slabelOffsetNomMonitorThe value of this object provides the label of the
Offset Monitor Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.2 |
lm1000suomOffsetNomMonitorThe value of this object provides the Unit of Measure of the
Offset Monitor Analog parameter. The unit of measure for
this parameter is dBro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.3 |
lm1000smajorHighOffsetNomMonitorThe value of this object provides the Major High alarm value
of the Offset Monitor Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.4 |
lm1000smajorLowOffsetNomMonitorThe value of this object provides the Major Low alarm value
of the Offset Monitor Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.5 |
lm1000sminorHighOffsetNomMonitorThe value of this object provides the Minor High alarm value
of the Offset Monitor Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.6 |
lm1000sminorLowOffsetNomMonitorThe value of this object provides the Minor Low alarm value
of the Offset Monitor Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.7 |
lm1000scurrentValueOffsetNomMonitorThe value of this object provides the Current value
of the Offset Monitor Power Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.8 |
lm1000sstateFlagOffsetNomMonitorThe value of this object provides the state
of the Offset Monitor Power Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.9 |
lm1000sminValueOffsetNomMonitorThe value of this object provides the minimum value
the Offset Monitor Power Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.10 |
lm1000smaxValueOffsetNomMonitorThe value of this object provides the maximum value
the Offset Monitor Power Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.11 |
lm1000salarmStateOffsetNomMonitorThe value of this object provides the curent alarm state of
the Offset Monitor Power Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.12 |
lm1000slabelLaserPowerThe value of this object provides the label of the
Laser Optical Power Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.13 |
lm1000suomLaserPowerThe value of this object provides the Unit of Measure of the
Laser Optical Power Analog parameter. The unit of measure for
this parameter is dBmro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.14 |
lm1000smajorHighLaserPowerThe value of this object provides the Major High alarm value
of the Laser Optical Power Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.15 |
lm1000smajorLowLaserPowerThe value of this object provides the Major Low alarm value
of the Laser Optical Power Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.16 |
lm1000sminorHighLaserPowerThe value of this object provides the Minor High alarm value
of the Laser Optical Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.17 |
lm1000sminorLowLaserPowerThe value of this object provides the Minor Low alarm value
of the Laser Optical Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.18 |
lm1000scurrentValueLaserPowerThe value of this object provides the Current value
of the Laser Optical Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.19 |
lm1000sstateFlagLaserPowerThe value of this object provides the state
of the Laser Optical Power Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.20 |
lm1000sminValueLaserPowerThe value of this object provides the minimum value
the Laser Optical Power Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.21 |
lm1000smaxValueLaserPowerThe value of this object provides the maximum value
the Laser Optical Power Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.22 |
lm1000salarmStateLaserPowerThe value of this object provides the curent alarm state of
the Laser Optical Power Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.23 |
lm1000slabelLaserTempThe value of this object provides the label of the
Laser Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.24 |
lm1000suomLaserTempThe value of this object provides the Unit of Measure of the
Laser Temperature Analog parameter. The unit of measure for
this parameter is degrees Cro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.25 |
lm1000smajorHighLaserTempThe value of this object provides the Major High alarm value
of the Laser Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.26 |
lm1000smajorLowLaserTempThe value of this object provides the Major Low alarm value
of the Laser Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.27 |
lm1000sminorHighLaserTempThe value of this object provides the Minor High alarm value
of the Laser Temperature Analog parameter.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.28 |
lm1000sminorLowLaserTempThe value of this object provides the Minor Low alarm value
of the Laser Temperature Analog parameter.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.29 |
lm1000scurrentValueLaserTempThe value of this object provides the Current value
of the Laser Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.30 |
lm1000sstateFlagLaserTempThe value of this object provides the state
of the Laser Temperature Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.31 |
lm1000sminValueLaserTempThe value of this object provides the minimum value
the Laser Temperature Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.32 |
lm1000smaxValueLaserTempThe value of this object provides the maximum value
the Laser Temperature Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.33 |
lm1000salarmStateLaserTempThe value of this object provides the curent alarm state of
the Laser Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.34 |
lm1000slabelLaserCurrentThe value of this object provides the label of the
Laser Bias Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.35 |
lm1000suomLaserCurrentThe value of this object provides the Unit of Measure of the
Laser Bias Current Analog parameter. The unit of measure for
this parameter is mAro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.36 |
lm1000smajorHighLaserCurrentThe value of this object provides the Major High alarm value
of the Laser Bias Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.37 |
lm1000smajorLowLaserCurrentThe value of this object provides the Major Low alarm value
of the Laser Bias Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.38 |
lm1000sminorHighLaserCurrentThe value of this object provides the Minor High alarm value
of the Laser Bias Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.39 |
lm1000sminorLowLaserCurrentThe value of this object provides the Minor Low alarm value
of the Laser Bias Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.40 |
lm1000scurrentValueLaserCurrentThe value of this object provides the Current value
of the Laser Bias Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.41 |
lm1000sstateFlagLaserCurrentThe value of this object provides the state
of the Laser Bias Current Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.42 |
lm1000sminValueLaserCurrentThe value of this object provides the minimum value
the Laser Bias Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.43 |
lm1000smaxValueLaserCurrentThe value of this object provides the maximum value
the Laser Bias Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.44 |
lm1000salarmStateLaserCurrentThe value of this object provides the curent alarm state of
the Laser Bias Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.45 |
lm1000slabelTecCurrentThe value of this object provides the label of the
TEC Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.46 |
lm1000suomTecCurrentThe value of this object provides the Unit of Measure of the
TEC Current Analog parameter. The unit of measure for
this parameter is mAro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.47 |
lm1000smajorHighTecCurrentThe value of this object provides the Major High alarm value
of the TEC Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.48 |
lm1000smajorLowTecCurrentThe value of this object provides the Major Low alarm value
of the TEC Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.49 |
lm1000sminorHighTecCurrentThe value of this object provides the Minor High alarm value
of the TEC Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.50 |
lm1000sminorLowTecCurrentThe value of this object provides the Minor Low alarm value
of the TEC Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.51 |
lm1000scurrentValueTecCurrentThe value of this object provides the Current value
of the TEC Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.52 |
lm1000sstateFlagTecCurrentThe value of this object provides the state
of the TEC Current Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.53 |
lm1000sminValueTecCurrentThe value of this object provides the minimum value
the TEC Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.54 |
lm1000smaxValueTecCurrentThe value of this object provides the maximum value
the TEC Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.55 |
lm1000salarmStateTecCurrentThe value of this object provides the curent alarm state of
the TEC Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.56 |
lm1000slabelModTempThe value of this object provides the label of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.57 |
lm1000suomModTempThe value of this object provides the Unit of Measure of the
Module Temperature Analog parameter. The unit of measure for
this parameter is degrees Cro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.58 |
lm1000smajorHighModTempThe value of this object provides the Major High alarm value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.59 |
lm1000smajorLowModTempThe value of this object provides the Major Low alarm value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.60 |
lm1000sminorHighModTempThe value of this object provides the Minor High alarm value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.61 |
lm1000sminorLowModTempThe value of this object provides the Minor Low alarm value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.62 |
lm1000scurrentValueModTempThe value of this object provides the Current value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.63 |
lm1000sstateFlagModTempThe value of this object provides the state
of the Module Temperature Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.64 |
lm1000sminValueModTempThe value of this object provides the minimum value
the Module Temperature Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.65 |
lm1000smaxValueModTempThe value of this object provides the maximum value
the Module Temperature Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.66 |
lm1000salarmStateModTempThe value of this object provides the curent alarm state of
the Module Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.67 |
lm1000slabelFanCurrentThe value of this object provides the label of the
Fan Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.68 |
lm1000suomFanCurrentThe value of this object provides the Unit of Measure of the
Fan Current Analog parameter. The unit of measure for
this parameter is mAro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.2.1.69 |
lm1000smajorHighFanCurrentThe value of this object provides the Major High alarm value
of the Fan Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.70 |
lm1000smajorLowFanCurrentThe value of this object provides the Major Low alarm value
of the Fan Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.71 |
lm1000sminorHighFanCurrentThe value of this object provides the Minor High alarm value
of the Fan Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.72 |
lm1000sminorLowFanCurrentThe value of this object provides the Minor Low alarm value
of the Fan Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.73 |
lm1000scurrentValueFanCurrentThe value of this object provides the Current value
of the Fan Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.74 |
lm1000sstateFlagFanCurrentThe value of this object provides the state
of the Fan Current Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.75 |
lm1000sminValueFanCurrentThe value of this object provides the minimum value
the Fan Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.76 |
lm1000smaxValueFanCurrentThe value of this object provides the maximum value
the Fan Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.31.2.1.77 |
lm1000salarmStateFanCurrentThe value of this object provides the curent alarm state of
the Fan Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.2.1.78 |
gx2Lm1000sDigitalTableThis table contains gx2Lm1000sm specific parameters with
nominal and current values. SEQUENCE OF Gx2Lm1000sDigitalEntry .1.3.6.1.4.1.1166.6.1.2.31.3 |
gx2Lm1000sDigitalEntryThis list contains digital parameters and descriptions. Gx2Lm1000sDigitalEntry .1.3.6.1.4.1.1166.6.1.2.31.3.2 |
gx2Lm1000sDigitalTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.3.2.1 |
lm1000slabelRfInputThe value of this object provides the label of the
RF Input Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.3.2.2 |
lm1000senumRfInputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.3.2.3 |
lm1000svalueRfInputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.31.3.2.4 |
lm1000sstateflagRfInputThe value of this object provides the state
of the RF Input Control Digital parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.3.2.5 |
lm1000slabelOptOutputThe value of this object provides the label of the
Optical Output Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.3.2.6 |
lm1000senumOptOutputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.3.2.7 |
lm1000svalueOptOutputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.31.3.2.8 |
lm1000sstateflagOptOutputThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.3.2.9 |
lm1000slabelAttnSettingThe value of this object provides the label of the
Attenuation Setting Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.3.2.10 |
lm1000senumAttnSettingThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.3.2.11 |
lm1000svalueAttnSettingThe value of this object is the current value of the parameter. Each step indicates a .5dB change in attenuation Its range is 0 to 15 dBrw Enumeration .1.3.6.1.4.1.1166.6.1.2.31.3.2.12 |
lm1000sstateflagAttnSettingThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.3.2.13 |
lm1000slabelFactoryDefaultThe value of this object provides the label of the
Factory Default Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.3.2.14 |
lm1000senumFactoryDefaultThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value
of 1..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.3.2.15 |
lm1000svalueFactoryDefaultThe value of this object is the current value of the parameter.
Return value is meaninglessrw Enumeration .1.3.6.1.4.1.1166.6.1.2.31.3.2.16 |
lm1000sstateflagFactoryDefaultThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.3.2.17 |
gx2Lm1000sStatusTableThis table contains gx2Lm1000s specific parameters with
nominal and current values. SEQUENCE OF Gx2Lm1000sStatusEntry .1.3.6.1.4.1.1166.6.1.2.31.4 |
gx2Lm1000sStatusEntryThis list contains Status parameters and descriptions. Gx2Lm1000sStatusEntry .1.3.6.1.4.1.1166.6.1.2.31.4.3 |
gx2Lm1000sStatusTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.4.3.1 |
lm1000slabelBootThe value of this object provides the label of the
Boot Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.4.3.2 |
lm1000svalueBootThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.3 |
lm1000sstateflagBootThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.4 |
lm1000slabelFlashThe value of this object provides the label of the
Flash Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.4.3.5 |
lm1000svalueFlashThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.6 |
lm1000sstateflagFlashThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.7 |
lm1000slabelFactoryDataCRCThe value of this object provides the label of the
Factory Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.4.3.8 |
lm1000svalueFactoryDataCRCThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.9 |
lm1000sstateflagFactoryDataCRCThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.10 |
lm1000slabelLaserDataCRCThe value of this object provides the label of the
Laser Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.4.3.11 |
lm1000svalueLaserDataCRCThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.12 |
lm1000sstateflagLaserDataCRCThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.13 |
lm1000slabelAlarmDataCrcThe value of this object provides the label of the
Alarm Data Crc parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.4.3.14 |
lm1000svalueAlarmDataCrcThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.15 |
lm1000sstateflagAlarmDataCrcThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.16 |
lm1000slabelRFInputStatusThe value of this object provides the label of the
Alarm Data Crc parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.4.3.17 |
lm1000svalueRFInputStatusThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.18 |
lm1000sstateflagRFInputStatusThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.31.4.3.19 |
gx2Lm1000sFactoryTableThis table contains gx2Lm1000s specific parameters with
nominal and current values. SEQUENCE OF Gx2Lm1000sFactoryEntry .1.3.6.1.4.1.1166.6.1.2.31.5 |
gx2Lm1000sFactoryEntryThis list contains Factory parameters and descriptions. Gx2Lm1000sFactoryEntry .1.3.6.1.4.1.1166.6.1.2.31.5.4 |
gx2Lm1000sFactoryTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.1 |
lm1000sbootControlByteThe value of this object indicates which bank the firmware
is currently being boot from.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.2 |
lm1000sbootStatusByteThis object indicates the status of the last boot. Bit 2 =
Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail
and Bit 0 = Bank 0 Fail (0 = Pass, 1 = Fail)ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.3 |
lm1000sbank1CRCThis object provides the CRC code of bank 0. The display
formate for the data is Hex.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.4 |
lm1000sbank2CRCThis object provides the CRC code of bank 1.The display
formate for the data is Hex.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.5 |
lm1000sprgEEPROMByteThis object indicates if the EEPROM has been programmedro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.6 |
lm1000sfactoryCRCThis object provides the CRC code for the Factory data.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.7 |
lm1000scalculateCRCThis object indicates which of the Enums will have the CRC
calculated.roobsolete Enumeration .1.3.6.1.4.1.1166.6.1.2.31.5.4.8 |
lm1000shourMeterThis object provides the hour meter reading of the module.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.9 |
lm1000sflashPrgCntAThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.10 |
lm1000sflashPrgCntBThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.31.5.4.11 |
lm1000sflashBankARevThis object provides the revision of flash bank 0. The rev is
2 characters.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.5.4.12 |
lm1000sflashBankBRevThis object provides the revision of flash bank 1. The rev is
2 characters.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.31.5.4.13 |