OMNI-gx2LME-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for OMNI-gx2LME-MIB.
220
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
220 total| Object Name |
|---|
trapLMEConfigChangeIntegerThis trap is issued if configuration of a single variable
with integer type was changed (via ANY interface).
TrapChangedValueInteger variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.1 |
trapLMEConfigChangeDisplayStringThis trap is issued if configuration of a single variable
with DispalayString type was changed (via ANY interface).
TrapChangedValueDisplayString variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.2 |
trapLMERFInputAlarmThis trap is issued when the Laser Modules RF input parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.3 |
trapLMERFOverloadAlarmThis trap is issued when the Laser Modules RF overload parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.4 |
trapLMERFOffsetAlarmThis trap is issued when the Laser Modules RF Offset parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.5 |
trapLMEOpticalPowerAlarmThis trap is issued when the Laser Modules Optical Power parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.6 |
trapLMELaserBiasAlarmThis trap is issued when the Laser Bias parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.7 |
trapLMELaserTempAlarmThis trap is issued when the Laser Temperature parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.8 |
trapLMETECCurrentAlarmThis trap is issued when the Laser Modules TEC Current parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.9 |
trapLMEFanCurrentAlarmThis trap is issued when the Laser Modules Fan Current
parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.10 |
trapLME12vAlarmThis trap is issued when the Laser Modules 12 Volt parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.11 |
trapLMEModuleTempAlarmThis trap is issued when the Laser Module Temperature goes out of range. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.12 |
trapLMEFlashAlarmThis trap is issued when the Laser Modules detects an error during
Flash memory operations. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.13 |
trapLMELaserBiasCntLoopAlarmThis trap is issued when the Laser Modules detects an error in its Laser Bias control loop
operation. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.14 |
trapLMEBankBootAlarmThis trap is issued when the Laser Modules detects an error while booting
from bank 0 or bank 1. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.15 |
trapLMELaserBiasCntLoopInitAlarmThis trap is issued when the Laser Bias Control loop init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.16 |
trapLMERFParamInitAlarmThis trap is issued when the RF parameter Init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.17 |
trapLMETECParamInitAlarmThis trap is issued when the TEC Parameter Init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.18 |
trapLMEAttnTableInitAlarmThis trap is issued when the Attenuator Table Init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.19 |
trapLMEPowerMeterTableInitAlarmThis trap is issued when the Power Meter Table Init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.20 |
trapLMELaserDataCRCAlarmThis trap is issued when the Laser Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.21 |
trapLMEAlarmDataCRCAlarmThis trap is issued when the Alarm Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.22 |
trapLMEFactoryDataCRCAlarmThis trap is issued when the Factory Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.23 |
trapLMEUserRFOffAlarmThis trap is issued when the the User RF is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.24 |
trapLMEUserOpticalOffAlarmThis trap is issued when the User Optical Power is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.25 |
trapLMEResetFactoryDefaultAlarmThis trap is issued when the Factory Default Reset occurs. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.27.0.26 |
gx2lmeDescriptor OBJECT IDENTIFIER .1.3.6.1.4.1.1166.6.1.2.27.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1166.6.1.2.27.1 |
gx2lmeAnalogTableThis table contains gx2LmE specific parameters with
nominal and current values. SEQUENCE OF Gx2lmeAnalogEntry .1.3.6.1.4.1.1166.6.1.2.27.2 |
gx2lmeAnalogEntryThis list contains the analog parameters and descriptions. Gx2lmeAnalogEntry .1.3.6.1.4.1.1166.6.1.2.27.2.1 |
gx2lmeAnalogTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.2.1.1 |
lmelabelOffsetNomMonitorThe value of this object provides the label of the
Offset Monitor Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.2 |
lmeuomOffsetNomMonitorThe value of this object provides the Unit of Measure of the
Offset Monitor Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.3 |
lmemajorHighOffsetNomMonitorThe value of this object provides the Major High alarm value
of the Offset Monitor Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.4 |
lmemajorLowOffsetNomMonitorThe value of this object provides the Major Low alarm value
of the Offset Monitor Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.5 |
lmeminorHighOffsetNomMonitorThe value of this object provides the Minor High alarm value
of the Offset Monitor Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.6 |
lmeminorLowOffsetNomMonitorThe value of this object provides the Minor Low alarm value
of the Offset Monitor Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.7 |
lmecurrentValueOffsetNomMonitorThe value of this object provides the Current value
of the Offset Monitor Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.8 |
lmestateFlagOffsetNomMonitorThe value of this object provides the state
of the Offset Monitor Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable)ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.9 |
lmeminValueOffsetNomMonitorThe value of this object provides the minimum value
the Offset Monitor Analog parameter can achive.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.10 |
lmemaxValueOffsetNomMonitorThe value of this object provides the maximum value
the Offset Monitor Analog parameter can achive.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.11 |
lmealarmStateOffsetNomMonitorThe value of this object provides the curent alarm state of
the Offset Monitor Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.12 |
lmelabelOffsetNomCntThe value of this object provides the label of the
Offset Control Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.13 |
lmeuomOffsetNomCntThe value of this object provides the label of the
Offset Control Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.14 |
lmemajorHighOffsetNomCntThe value of this object provides the Major High alarm value
of the Offset Control Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.15 |
lmemajorLowOffsetNomCntThe value of this object provides the Major Low alarm value
of the Offset Control Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.16 |
lmeminorHighOffsetNomCntThe value of this object provides the Minor High alarm value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.17 |
lmeminorLowOffsetNomCntThe value of this object provides the Minor Low alarm value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.18 |
lmecurrentValueOffsetNomCntThe value of this object provides the Current value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.rw Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.19 |
lmestateFlagOffsetNomCntThe value of this object provides the state
of the Offset Control Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable)ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.20 |
lmeminValueOffsetNomCntThe value of this object provides the minimum value
the Offset Control Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.21 |
lmemaxValueOffsetNomCntThe value of this object provides the maximum value
the Offset Control Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.22 |
lmealarmStateOffsetNomCntThe value of this object provides the curent alarm state of
the Offset Control Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.23 |
lmelabelRelAttenSettingThe value of this object provides the label of the
Attenuator Setting Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.24 |
lmeuomRelAttenSettingThe value of this object provides the Unit of Measure of the
Attenuator Setting Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.25 |
lmemajorHighRelAttenSettingThe value of this object provides the Major High alarm value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.26 |
lmemajorLowRelAttenSettingThe value of this object provides the Major Low alarm value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.27 |
lmeminorHighRelAttenSettingThe value of this object provides the Minor High alarm value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.28 |
lmeminorLowRelAttenSettingThe value of this object provides the Minor Low alarm value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.29 |
lmecurrentValueRelAttenSettingThe value of this object provides the Current value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.rw Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.30 |
lmestateFlagRelAttenSettingThe value of this object provides the state
of the Attenuator Setting Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.31 |
lmeminValueRelAttenSettingThe value of this object provides the minimum value
the Attenuator Setting Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.32 |
lmemaxValueRelAttenSettingThe value of this object provides the maximum value
the Attenuator Setting Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.33 |
lmealarmStateRelAttenSettingThe value of this object provides the curent alarm state of
the Attenuator Setting Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.34 |
lmelabelOptPowerThe value of this object provides the label of the
Optical Power Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.35 |
lmeuomOptPowerThe value of this object provides the Unit of Measure of the
Optical Power Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.36 |
lmemajorHighOptPowerThe value of this object provides the Major High alarm value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.37 |
lmemajorLowOptPowerThe value of this object provides the Major Low alarm value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.38 |
lmeminorHighOptPowerThe value of this object provides the Minor High alarm value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.39 |
lmeminorLowOptPowerThe value of this object provides the Minor Low alarm value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.40 |
lmecurrentValueOptPowerThe value of this object provides the Current value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.41 |
lmestateFlagOptPowerThe value of this object provides the state
of the Optical Power Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.42 |
lmeminValueOptPowerThe value of this object provides the minimum value
the Optical Power Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.43 |
lmemaxValueOptPowerThe value of this object provides the maximum value
the Optical Power Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.44 |
lmealarmStateOptPowerThe value of this object provides the curent alarm state of
the Optical Power Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.45 |
lmelabelLaserBiasThe value of this object provides the label of the
Laser Bias Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.46 |
lmeuomLaserBiasThe value of this object provides the Unit of Measure of the
Laser Bias Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.47 |
lmemajorHighLaserBiasThe value of this object provides the Major High alarm value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.48 |
lmemajorLowLaserBiasThe value of this object provides the Major Low alarm value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.49 |
lmeminorHighLaserBiasThe value of this object provides the Minor High alarm value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.50 |
lmeminorLowLaserBiasThe value of this object provides the Minor Low alarm value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.51 |
lmecurrentValueLaserBiasThe value of this object provides the Current value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.52 |
lmestateFlagLaserBiasThe value of this object provides the state
of the Laser Bias Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.53 |
lmeminValueLaserBiasThe value of this object provides the minimum value
the Laser Bias Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.54 |
lmemaxValueLaserBiasThe value of this object provides the maximum value
the Laser Bias Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.55 |
lmealarmStateLaserBiasThe value of this object provides the curent alarm state of
the Laser Bias Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.56 |
lmelabelTecCurrentThe value of this object provides the label of the
TEC Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.57 |
lmeuomTecCurrentThe value of this object provides the Unit of Measure of the
TEC Current Analog parameter..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.58 |
lmemajorHighTecCurrentThe value of this object provides the Major High alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.59 |
lmemajorLowTecCurrentThe value of this object provides the Major Low alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.60 |
lmeminorHighTecCurrentThe value of this object provides the Minor High alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.61 |
lmeminorLowTecCurrentThe value of this object provides the Minor Low alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.62 |
lmecurrentValueTecCurrentThe value of this object provides the Current value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.63 |
lmestateFlagTecCurrentThe value of this object provides the state
of the TEC Current Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.64 |
lmeminValueTecCurrentThe value of this object provides the minimum value
the TEC Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.65 |
lmemaxValueTecCurrentThe value of this object provides the maximum value
the TEC Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.66 |
lmealarmStateTecCurrentThe value of this object provides the curent alarm state of
the TEC Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.67 |
lmelabelLaserTempThe value of this object provides the label of the
Laser Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.68 |
lmeuomLaserTempThe value of this object provides the Unit of Measure of the
Laser Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.69 |
lmemajorHighLaserTempThe value of this object provides the Major High alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.70 |
lmemajorLowLaserTempThe value of this object provides the Major Low alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.71 |
lmeminorHighLaserTempThe value of this object provides the Minor High alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.72 |
lmeminorLowLaserTempThe value of this object provides the Minor Low alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.73 |
lmecurrentValueLaserTempThe value of this object provides the Current value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.74 |
lmestateFlagLaserTempThe value of this object provides the state
of the Laser Temperature Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.75 |
lmeminValueLaserTempThe value of this object provides the minimum value
the Laser Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.76 |
lmemaxValueLaserTempThe value of this object provides the maximum value
the Laser Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.77 |
lmealarmStateLaserTempThe value of this object provides the curent alarm state of
the Laser Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.78 |
lmelabelModuleTempThe value of this object provides the label of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.79 |
lmeuomModuleTempThe value of this object provides the Unit of Measure of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.80 |
lmemajorHighModuleTempThe value of this object provides the Major High alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.81 |
lmemajorLowModuleTempThe value of this object provides the Major Low alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.82 |
lmeminorHighModuleTempThe value of this object provides the Minor High alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.83 |
lmeminorLowModuleTempThe value of this object provides the Minor Low alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.84 |
lmecurrentValueModuleTempThe value of this object provides the Current value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.85 |
lmestateFlagModuleTempThe value of this object provides the state
of the Module Temperature Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.86 |
lmeminValueModuleTempThe value of this object provides the minimum value
the Module Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.87 |
lmemaxValueModuleTempThe value of this object provides the maximum value
the Module Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.88 |
lmealarmStateModuleTempThe value of this object provides the curent alarm state of
the Module Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.89 |
lmelabelFanCurrentThe value of this object provides the label of the
Fan Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.90 |
lmeuomFanCurrentThe value of this object provides the Unit of Measure of the
Fan Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.91 |
lmemajorHighFanCurrentThe value of this object provides the Major High alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.92 |
lmemajorLowFanCurrentThe value of this object provides the Major Low alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.93 |
lmeminorHighFanCurrentThe value of this object provides the Minor High alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.94 |
lmeminorLowFanCurrentThe value of this object provides the Minor Low alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.95 |
lmecurrentValueFanCurrentThe value of this object provides the Current value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.96 |
lmestateFlagFanCurrentThe value of this object provides the state
of the Fan Current Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.97 |
lmeminValueFanCurrentThe value of this object provides the minimum value
the Fan Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.98 |
lmemaxValueFanCurrentThe value of this object provides the maximum value
the Fan Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.99 |
lmealarmStateFanCurrentThe value of this object provides the curent alarm state of
the Fan Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.100 |
lmelabel12VoltThe value of this object provides the label of the
12v Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.101 |
lmeuom12VoltThe value of this object provides the Unit of Measure of the
12v Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.2.1.102 |
lmemajorHigh12VoltThe value of this object provides the Major High alarm value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.103 |
lmemajorLow12VoltThe value of this object provides the Major Low alarm value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.104 |
lmeminorHigh12VoltThe value of this object provides the Minor High alarm value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.105 |
lmeminorLow12VoltThe value of this object provides the Minor Low alarm value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.106 |
lmecurrentValue12VoltThe value of this object provides the Current value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.107 |
lmestateFlag12VoltThe value of this object provides the state
of the 12v Current Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.108 |
lmeminValue12VoltThe value of this object provides the minimum value
the 12v Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.109 |
lmemaxValue12VoltThe value of this object provides the maximum value
the 12v Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.27.2.1.110 |
lmealarmState12VoltThe value of this object provides the curent alarm state of
the 12v Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.2.1.111 |
gx2lmeDigitalTableThis table contains gx2LmE specific parameters with
nominal and current values. SEQUENCE OF Gx2lmeDigitalEntry .1.3.6.1.4.1.1166.6.1.2.27.3 |
gx2lmeDigitalEntryThis list contains digital parameters and descriptions. Gx2lmeDigitalEntry .1.3.6.1.4.1.1166.6.1.2.27.3.2 |
gx2lmeDigitalTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.3.2.1 |
lmelabelRfInputThe value of this object provides the label of the
RF Input Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.2 |
lmeenumRfInputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.3 |
lmevalueRfInputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.4 |
lmestateflagRfInputThe value of this object provides the state
of the RF Input Control Digital parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.5 |
lmelabelOptOutputThe value of this object provides the label of the
Optical Output Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.6 |
lmeenumOptOutputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.7 |
lmevalueOptOutputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.8 |
lmestateflagOptOutputThe value of this object provides the lmestate
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.9 |
lmelabelLaserModeThe value of this object provides the label of the
Laser Mode Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.10 |
lmeenumLaserModeThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.11 |
lmevalueLaserModeThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.12 |
lmestateflagLaserModeThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.13 |
lmelabelLaserSecModeThe value of this object provides the label of the
Laser Secondary Mode Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.14 |
lmeenumLaserSecModeThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.15 |
lmevalueLaserSecModeThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.16 |
lmestateflagLaserSecModeThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.17 |
lmelabelVideoOffsetThe value of this object provides the label of the
Video Offset Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.18 |
lmeenumVideoOffsetThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.19 |
lmevalueVideoOffsetThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.20 |
lmestateflagVideoOffsetThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.21 |
lmelabelFactoryDefaultThe value of this object provides the label of the
Factory Default Reset Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.22 |
lmeenumFactoryDefaultThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.23 |
lmevalueFactoryDefaultThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.24 |
lmestateflagFactoryDefaultThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.25 |
lmelabelFiberLengthThis object is only used for the LC1000 device family.
The value of this object provides the label for the
Fiber Length Digital parameter .ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.26 |
lmeenumFiberLengthThis object is only used for the LC1000 device family.
The value of this object represents the Enumeration values
possible for the Digital parameter.
The range for fiber length selection is from 6 to 25km,
where 6km is represented with a 1 and 25 with a 19.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.27 |
lmevalueFiberLengthThis object is only used for the LC1000 device family.
The value of this object is the current value of the parameter.
It is used to set fiber length. The value range for this object is: 0 to 30 Km.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.28 |
lmestateflagFiberLengthThis object is only used for the LC1000 device family.
The value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.29 |
lmelabelConditioningUnitThis object is only used for the LC1000 device family.
The value of this object provides the label for the
Conditioning Unit Digital parameter .ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.30 |
lmeenumConditioningUnitThis object is only used for the LC1000 device family.
The value of this object represents the Enumeration values
possible for the Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.3.2.31 |
lmevalueConditioningUnitThis object is only used for the LC1000 device family.
The value of this object is the current value of the parameter.
It is used to normalize the output by -3db when a conditioning unit is being used in the system.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.32 |
lmestateflagConditioningUnitThis object is only used for the LC1000 device family.
The value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.3.2.33 |
gx2lmeStatusTableThis table contains gx2LmE specific parameters with
nominal and current values. SEQUENCE OF Gx2lmeStatusEntry .1.3.6.1.4.1.1166.6.1.2.27.4 |
gx2lmeStatusEntryThis list contains Status parameters and descriptions. Gx2lmeStatusEntry .1.3.6.1.4.1.1166.6.1.2.27.4.3 |
gx2lmeStatusTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.4.3.1 |
lmelabelBootThe value of this object provides the label of the
Boot Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.4.3.2 |
lmevalueBootThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.3 |
lmestateflagBootThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.4 |
lmelabelFlashThe value of this object provides the label of the
Flash Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.4.3.5 |
lmevalueFlashThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.6 |
lmestateflagFlashThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.7 |
lmelabelFactoryDataCRCThe value of this object provides the label of the
Factory Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.4.3.8 |
lmevalueFactoryDataCRCThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.9 |
lmestateflagFactoryDataCRCThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.10 |
lmelabelLaserDataCRCThe value of this object provides the label of the
Laser Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.4.3.11 |
lmevalueLaserDataCRCThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.12 |
lmestateflagLaserDataCRCThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.13 |
lmelabelAlarmDataCrcThe value of this object provides the label of the
Alarm Data Crc parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.4.3.14 |
lmevalueAlarmDataCrcThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.15 |
lmestateflagAlarmDataCrcThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.16 |
lmelabelHWStatusThe value of this object provides the label of the
Laser Drive Level Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.4.3.17 |
lmevalueHWStatusThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.18 |
lmestateflagHWStatusThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.19 |
lmelabelRFInputStatusThe value of this object provides the label of the
RF Input Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.4.3.20 |
lmevalueRFInputStatusThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.21 |
lmestateflagRFInputStatusThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.4.3.22 |
gx2lmeFactoryTableThis table contains gx2LmE specific parameters with
nominal and current values. SEQUENCE OF Gx2lmeFactoryEntry .1.3.6.1.4.1.1166.6.1.2.27.5 |
gx2lmeFactoryEntryThis list contains Factory parameters and descriptions. Gx2lmeFactoryEntry .1.3.6.1.4.1.1166.6.1.2.27.5.4 |
gx2lmeFactoryTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.1 |
lmebootControlByteValueThe value of this object indicates which bank the firmware
is currently being boot from.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.2 |
lmebootStatusByteValueThis object indicates the status of the last bootro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.3 |
lmebank1CRCValueThis object provides the CRC code of bank 0.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.4 |
lmebank2CRCValueThis object provides the CRC code of bank 1.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.5 |
lmeprgEEPROMByteValueThis object indicates if the EEPROM has been programmedro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.6 |
lmefactoryCRCValueThis object provides the CRC code for the Factory data.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.7 |
lmecalculateCRCValueThis object indicates which of the Emnums will have the CRC calculated.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.27.5.4.8 |
lmehourMeterValueThis object provides the hour meter reading of the module.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.9 |
lmeflashPrgCntAValueThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.10 |
lmeflashPrgCntBValueThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.5.4.11 |
lmeflashBankARevValueThis object provides the revision of flash bank 0.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.5.4.12 |
lmeflashBankBRevValueThis object provides the revision of flash bank 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.27.5.4.13 |
gx2Lm1000EHoldTimeTableThis table contains gx2Lm1000E specific parameters with
nominal and current values. SEQUENCE OF Gx2Lm1000EHoldTimeEntry .1.3.6.1.4.1.1166.6.1.2.27.6 |
gx2Lm1000EHoldTimeEntryThis list contains digital product class and the
associated RF channel parameters and descriptions. Gx2Lm1000EHoldTimeEntry .1.3.6.1.4.1.1166.6.1.2.27.6.5 |
gx2Lm1000EHoldTimeTableIndexThe value of this object is the index of the data object.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.6.5.1 |
gx2Lm1000EHoldTimeSpecIndexThe value of this object identifies the index of the alarm object to be modified.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.27.6.5.2 |
gx2Lm1000EHoldTimeDataThe value of this object provides access to the hold timers used
to suppress nose on analog objects. This object is a 32 bit object.
Validation data is entered into bytes zero and one of the object.
Bytes three and four are used to entering the hold time for the
specified alarm object. The Hold timer data ranges from 0 to 1300 seconds.
The index of this object corresponds to the alarm object to be modified.
Alarm Hold timers correspond to the index of this object as follows:
Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx,
The hold time is represented in seconds.rw INTEGER .1.3.6.1.4.1.1166.6.1.2.27.6.5.3 |