OMNI-gx2GS1000-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
209
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
209 total| Object Name |
|---|
trapGS1000ConfigChangeIntegerThis trap is issued if configuration of a single variable
with integer type was changed (via ANY interface).
TrapChangedValueInteger variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.1 |
trapGS1000ConfigChangeDisplayStringThis trap is issued if configuration of a single variable
with DispalayString type was changed (via ANY interface).
TrapChangedValueDisplayString variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.2 |
trapGS1000RFInputAlarmThis trap is issued when the Laser Modules RF input parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.3 |
trapGS1000RFOverloadAlarmThis trap is issued when the Laser Modules RF overload parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.4 |
trapGS1000RFOffsetAlarmThis trap is issued when the Laser Modules RF Offset parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.5 |
trapGS1000OpticalPowerAlarmThis trap is issued when the Laser Modules Optical Power parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.6 |
trapGS1000LaserBiasAlarmThis trap is issued when the Laser Bias parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.7 |
trapGS1000LaserTempAlarmThis trap is issued when the Laser Temperature parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.8 |
trapGS1000TECCurrentAlarmThis trap is issued when the Laser Modules TEC Current parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.9 |
trapGS1000Fan1SpeedAlarmThis trap is issued when the Laser Modules Fan 1 Speed
parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.10 |
trapGS1000Fan2SpeedAlarmThis trap is issued when the Laser Modules Fan 2 Speed
parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.11 |
trapGS100012vAlarmThis trap is issued when the Laser Modules 12 Volt parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.12 |
trapGS1000ModuleTempAlarmThis trap is issued when the Laser Module Temperature goes out of range. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.13 |
trapGS1000FlashAlarmThis trap is issued when the Laser Modules detects an error during
Flash memory operations. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.14 |
trapGS1000LaserBiasCntLoopAlarmThis trap is issued when the Laser Modules detects an error in its Laser Bias control loop
operation. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.15 |
trapGS1000BankBootAlarmThis trap is issued when the Laser Modules detects an error while booting
from bank 0 or bank 1. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.16 |
trapGS1000LaserBiasCntLoopInitAlarmThis trap is issued when the Laser Bias Control loop init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.17 |
trapGS1000RFParamInitAlarmThis trap is issued when the RF parameter Init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.18 |
trapGS1000TECParamInitAlarmThis trap is issued when the TEC Parameter Init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.19 |
trapGS1000AttnTableInitAlarmThis trap is issued when the Attenuator Table Init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.20 |
trapGS1000PowerMeterTableInitAlarmThis trap is issued when the Power Meter Table Init fails. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.21 |
trapGS1000LaserDataCRCAlarmThis trap is issued when the Laser Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.22 |
trapGS1000AlarmDataCRCAlarmThis trap is issued when the Alarm Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.23 |
trapGS1000FactoryDataCRCAlarmThis trap is issued when the Factory Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.24 |
trapGS1000UserRFOffAlarmThis trap is issued when the the User RF is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.25 |
trapGS1000UserOpticalOffAlarmThis trap is issued when the User Optical Power is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.26 |
trapGS1000ResetFactoryDefaultAlarmThis trap is issued when the Factory Default Reset occurs. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.36.0.27 |
gx2gs1000Descriptor OBJECT IDENTIFIER .1.3.6.1.4.1.1166.6.1.2.36.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1166.6.1.2.36.1 |
gx2gs1000AnalogTableThis table contains gx2Gs1000 specific parameters with
nominal and current values. SEQUENCE OF Gx2gs1000AnalogEntry .1.3.6.1.4.1.1166.6.1.2.36.2 |
gx2gs1000AnalogEntryThis list contains the analog parameters and descriptions. Gx2gs1000AnalogEntry .1.3.6.1.4.1.1166.6.1.2.36.2.1 |
gx2gs1000AnalogTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.2.1.1 |
gs1000labelOffsetNomMonitorThe value of this object provides the label of the
Offset Monitor Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.2 |
gs1000uomOffsetNomMonitorThe value of this object provides the Unit of Measure of the
Offset Monitor Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.3 |
gs1000majorHighOffsetNomMonitorThe value of this object provides the Major High alarm value
of the Offset Monitor Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.4 |
gs1000majorLowOffsetNomMonitorThe value of this object provides the Major Low alarm value
of the Offset Monitor Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.5 |
gs1000minorHighOffsetNomMonitorThe value of this object provides the Minor High alarm value
of the Offset Monitor Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.6 |
gs1000minorLowOffsetNomMonitorThe value of this object provides the Minor Low alarm value
of the Offset Monitor Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.7 |
gs1000currentValueOffsetNomMonitorThe value of this object provides the Current value
of the Offset Monitor Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.8 |
gs1000stateFlagOffsetNomMonitorThe value of this object provides the state
of the Offset Monitor Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable)ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.9 |
gs1000minValueOffsetNomMonitorThe value of this object provides the minimum value
the Offset Monitor Analog parameter can achive.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.10 |
gs1000maxValueOffsetNomMonitorThe value of this object provides the maximum value
the Offset Monitor Analog parameter can achive.
This value is a float and is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.11 |
gs1000alarmStateOffsetNomMonitorThe value of this object provides the curent alarm state of
the Offset Monitor Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.12 |
gs1000labelOffsetNomCntThe value of this object provides the label of the
Offset Control Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.13 |
gs1000uomOffsetNomCntThe value of this object provides the label of the
Offset Control Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.14 |
gs1000majorHighOffsetNomCntThe value of this object provides the Major High alarm value
of the Offset Control Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.15 |
gs1000majorLowOffsetNomCntThe value of this object provides the Major Low alarm value
of the Offset Control Analog parameter.
This value is a float and is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.16 |
gs1000minorHighOffsetNomCntThe value of this object provides the Minor High alarm value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.17 |
gs1000minorLowOffsetNomCntThe value of this object provides the Minor Low alarm value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.18 |
gs1000currentValueOffsetNomCntThe value of this object provides the Current value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.rw Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.19 |
gs1000stateFlagOffsetNomCntThe value of this object provides the state
of the Offset Control Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable)ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.20 |
gs1000minValueOffsetNomCntThe value of this object provides the minimum value
the Offset Control Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.21 |
gs1000maxValueOffsetNomCntThe value of this object provides the maximum value
the Offset Control Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.22 |
gs1000alarmStateOffsetNomCntThe value of this object provides the curent alarm state of
the Offset Control Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.23 |
gs1000labelOptPowerThe value of this object provides the label of the
Optical Power Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.24 |
gs1000uomOptPowerThe value of this object provides the Unit of Measure of the
Optical Power Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.25 |
gs1000majorHighOptPowerThe value of this object provides the Major High alarm value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.26 |
gs1000majorLowOptPowerThe value of this object provides the Major Low alarm value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.27 |
gs1000minorHighOptPowerThe value of this object provides the Minor High alarm value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.28 |
gs1000minorLowOptPowerThe value of this object provides the Minor Low alarm value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.29 |
gs1000currentValueOptPowerThe value of this object provides the Current value
of the Optical Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.30 |
gs1000stateFlagOptPowerThe value of this object provides the state
of the Optical Power Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.31 |
gs1000minValueOptPowerThe value of this object provides the minimum value
the Optical Power Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.32 |
gs1000maxValueOptPowerThe value of this object provides the maximum value
the Optical Power Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.33 |
gs1000alarmStateOptPowerThe value of this object provides the curent alarm state of
the Optical Power Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.34 |
gs1000labelLaserTempThe value of this object provides the label of the
Laser Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.35 |
gs1000uomLaserTempThe value of this object provides the Unit of Measure of the
Laser Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.36 |
gs1000majorHighLaserTempThe value of this object provides the Major High alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.37 |
gs1000majorLowLaserTempThe value of this object provides the Major Low alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.38 |
gs1000minorHighLaserTempThe value of this object provides the Minor High alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.39 |
gs1000minorLowLaserTempThe value of this object provides the Minor Low alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.40 |
gs1000currentValueLaserTempThe value of this object provides the Current value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.41 |
gs1000stateFlagLaserTempThe value of this object provides the state
of the Laser Temperature Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.42 |
gs1000minValueLaserTempThe value of this object provides the minimum value
the Laser Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.43 |
gs1000maxValueLaserTempThe value of this object provides the maximum value
the Laser Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.44 |
gs1000alarmStateLaserTempThe value of this object provides the curent alarm state of
the Laser Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.45 |
gs1000labelLaserBiasThe value of this object provides the label of the
Laser Bias Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.46 |
gs1000uomLaserBiasThe value of this object provides the Unit of Measure of the
Laser Bias Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.47 |
gs1000majorHighLaserBiasThe value of this object provides the Major High alarm value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.48 |
gs1000majorLowLaserBiasThe value of this object provides the Major Low alarm value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.49 |
gs1000minorHighLaserBiasThe value of this object provides the Minor High alarm value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.50 |
gs1000minorLowLaserBiasThe value of this object provides the Minor Low alarm value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.51 |
gs1000currentValueLaserBiasThe value of this object provides the Current value
of the Laser Bias Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.52 |
gs1000stateFlagLaserBiasThe value of this object provides the state
of the Laser Bias Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.53 |
gs1000minValueLaserBiasThe value of this object provides the minimum value
the Laser Bias Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.54 |
gs1000maxValueLaserBiasThe value of this object provides the maximum value
the Laser Bias Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.55 |
gs1000alarmStateLaserBiasThe value of this object provides the curent alarm state of
the Laser Bias Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.56 |
gs1000labelTecCurrentThe value of this object provides the label of the
TEC Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.57 |
gs1000uomTecCurrentThe value of this object provides the Unit of Measure of the
TEC Current Analog parameter..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.58 |
gs1000majorHighTecCurrentThe value of this object provides the Major High alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.59 |
gs1000majorLowTecCurrentThe value of this object provides the Major Low alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.60 |
gs1000minorHighTecCurrentThe value of this object provides the Minor High alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.61 |
gs1000minorLowTecCurrentThe value of this object provides the Minor Low alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.62 |
gs1000currentValueTecCurrentThe value of this object provides the Current value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.63 |
gs1000stateFlagTecCurrentThe value of this object provides the state
of the TEC Current Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.64 |
gs1000minValueTecCurrentThe value of this object provides the minimum value
the TEC Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.65 |
gs1000maxValueTecCurrentThe value of this object provides the maximum value
the TEC Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.66 |
gs1000alarmStateTecCurrentThe value of this object provides the curent alarm state of
the TEC Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.67 |
gs1000labelModuleTempThe value of this object provides the label of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.68 |
gs1000uomModuleTempThe value of this object provides the Unit of Measure of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.69 |
gs1000majorHighModuleTempThe value of this object provides the Major High alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.70 |
gs1000majorLowModuleTempThe value of this object provides the Major Low alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.71 |
gs1000minorHighModuleTempThe value of this object provides the Minor High alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.72 |
gs1000minorLowModuleTempThe value of this object provides the Minor Low alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.73 |
gs1000currentValueModuleTempThe value of this object provides the Current value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.74 |
gs1000stateFlagModuleTempThe value of this object provides the state
of the Module Temperature Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.75 |
gs1000minValueModuleTempThe value of this object provides the minimum value
the Module Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.76 |
gs1000maxValueModuleTempThe value of this object provides the maximum value
the Module Temperature Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.77 |
gs1000alarmStateModuleTempThe value of this object provides the curent alarm state of
the Module Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.78 |
gs1000labelFan1SpeedThe value of this object provides the label of the
Fan 1 Speed Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.79 |
gs1000uomFan1SpeedThe value of this object provides the Unit of Measure of the
Fan 1 Speed Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.80 |
gs1000majorHighFan1SpeedThe value of this object provides the Major High alarm value
of the Fan 1 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.81 |
gs1000majorLowFan1SpeedThe value of this object provides the Major Low alarm value
of the Fan 1 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.82 |
gs1000minorHighFan1SpeedThe value of this object provides the Minor High alarm value
of the Fan 1 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.83 |
gs1000minorLowFan1SpeedThe value of this object provides the Minor Low alarm value
of the Fan 1 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.84 |
gs1000currentValueFan1SpeedThe value of this object provides the Current value
of the Fan 1 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.85 |
gs1000stateFlagFan1SpeedThe value of this object provides the state
of the Fan 1 Speed Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.86 |
gs1000minValueFan1SpeedThe value of this object provides the minimum value
the Fan 1 Speed Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.87 |
gs1000maxValueFan1SpeedThe value of this object provides the maximum value
the Fan 1 Speed Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.88 |
gs1000alarmStateFan1SpeedThe value of this object provides the curent alarm state of
the Fan 1 Speed Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.89 |
gs1000labelFan2SpeedThe value of this object provides the label of the
Fan 2 Speed Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.90 |
gs1000uomFan2SpeedThe value of this object provides the Unit of Measure of the
Fan 2 Speed Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.91 |
gs1000majorHighFan2SpeedThe value of this object provides the Major High alarm value
of the Fan 2 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.92 |
gs1000majorLowFan2SpeedThe value of this object provides the Major Low alarm value
of the Fan 2 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.93 |
gs1000minorHighFan2SpeedThe value of this object provides the Minor High alarm value
of the Fan 2 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.
In this version of the Firmware and MIB this Parameter is not used and is
optional. All reads will return the Unused Parameter (10,000,000)ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.94 |
gs1000minorLowFan2SpeedThe value of this object provides the Minor Low alarm value
of the Fan 2 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.95 |
gs1000currentValueFan2SpeedThe value of this object provides the Current value
of the Fan 2 Speed Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.96 |
gs1000stateFlagFan2SpeedThe value of this object provides the state
of the Fan 2 Speed Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.97 |
gs1000minValueFan2SpeedThe value of this object provides the minimum value
the Fan 2 Speed Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.98 |
gs1000maxValueFan2SpeedThe value of this object provides the maximum value
the Fan 2 Speed Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.99 |
gs1000alarmStateFan2SpeedThe value of this object provides the curent alarm state of
the Fan 2 Speed Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.100 |
gs1000label12VoltThe value of this object provides the label of the
12v Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.101 |
gs1000uom12VoltThe value of this object provides the Unit of Measure of the
12v Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.2.1.102 |
gs1000majorHigh12VoltThe value of this object provides the Major High alarm value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.103 |
gs1000majorLow12VoltThe value of this object provides the Major Low alarm value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.104 |
gs1000minorHigh12VoltThe value of this object provides the Minor High alarm value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.105 |
gs1000minorLow12VoltThe value of this object provides the Minor Low alarm value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.106 |
gs1000currentValue12VoltThe value of this object provides the Current value
of the 12v Current Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.107 |
gs1000stateFlag12VoltThe value of this object provides the state
of the 12v Current Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.108 |
gs1000minValue12VoltThe value of this object provides the minimum value
the 12v Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.109 |
gs1000maxValue12VoltThe value of this object provides the maximum value
the 12v Current Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.36.2.1.110 |
gs1000alarmState12VoltThe value of this object provides the curent alarm state of
the 12v Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.2.1.111 |
gx2gs1000DigitalTableThis table contains gx2Gs1000 specific parameters with
nominal and current values. SEQUENCE OF Gx2gs1000DigitalEntry .1.3.6.1.4.1.1166.6.1.2.36.3 |
gx2gs1000DigitalEntryThis list contains digital parameters and descriptions. Gx2gs1000DigitalEntry .1.3.6.1.4.1.1166.6.1.2.36.3.2 |
gx2gs1000DigitalTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.3.2.1 |
gs1000labelRfInputThe value of this object provides the label of the
RF Input Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.2 |
gs1000enumRfInputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.3 |
gs1000valueRfInputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.4 |
gs1000stateflagRfInputThe value of this object provides the state
of the RF Input Control Digital parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.5 |
gs1000labelOptOutputThe value of this object provides the label of the
Optical Output Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.6 |
gs1000enumOptOutputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.7 |
gs1000valueOptOutputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.8 |
gs1000stateflagOptOutputThe value of this object provides the gs1000state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.9 |
gs1000labelLaserModeThe value of this object provides the label of the
Laser Mode Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.10 |
gs1000enumLaserModeThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.11 |
gs1000valueLaserModeThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.12 |
gs1000stateflagLaserModeThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.13 |
gs1000labelAttenSettingThe value of this object provides the label of the
Attenuation Setting Ditital Parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.14 |
gs1000enumAttenSettingThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.15 |
gs1000valueAttenSettingThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.16 |
gs1000stateflagAttenSettingThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.17 |
gs1000labelLaserSecModeThe value of this object provides the label of the
Laser Secondary Mode Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.18 |
gs1000enumLaserSecModeThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.19 |
gs1000valueLaserSecModeThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.20 |
gs1000stateflagLaserSecModeThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.21 |
gs1000labelVideoOffsetThe value of this object provides the label of the
Video Offset Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.22 |
gs1000enumVideoOffsetThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.23 |
gs1000valueVideoOffsetThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.24 |
gs1000stateflagVideoOffsetThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.25 |
gs1000labelFactoryDefaultThe value of this object provides the label of the
Factory Default Reset Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.26 |
gs1000enumFactoryDefaultThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.3.2.27 |
gs1000valueFactoryDefaultThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.28 |
gs1000stateflagFactoryDefaultThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.3.2.29 |
gx2gs1000StatusTableThis table contains gx2Gs1000 specific parameters with
nominal and current values. SEQUENCE OF Gx2gs1000StatusEntry .1.3.6.1.4.1.1166.6.1.2.36.4 |
gx2gs1000StatusEntryThis list contains Status parameters and descriptions. Gx2gs1000StatusEntry .1.3.6.1.4.1.1166.6.1.2.36.4.3 |
gx2gs1000StatusTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.4.3.1 |
gs1000labelBootThe value of this object provides the label of the
Boot Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.4.3.2 |
gs1000valueBootThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.3 |
gs1000stateflagBootThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.4 |
gs1000labelFlashThe value of this object provides the label of the
Flash Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.4.3.5 |
gs1000valueFlashThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.6 |
gs1000stateflagFlashThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.7 |
gs1000labelFactoryDataCRCThe value of this object provides the label of the
Factory Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.4.3.8 |
gs1000valueFactoryDataCRCThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.9 |
gs1000stateflagFactoryDataCRCThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.10 |
gs1000labelLaserDataCRCThe value of this object provides the label of the
Laser Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.4.3.11 |
gs1000valueLaserDataCRCThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.12 |
gs1000stateflagLaserDataCRCThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.13 |
gs1000labelAlarmDataCrcThe value of this object provides the label of the
Alarm Data Crc parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.4.3.14 |
gs1000valueAlarmDataCrcThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.15 |
gs1000stateflagAlarmDataCrcThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.16 |
gs1000labelRFInputStatusThe value of this object provides the label of the
RF Input Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.4.3.17 |
gs1000valueRFInputStatusThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.18 |
gs1000stateflagRFInputStatusThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.4.3.19 |
gx2gs1000FactoryTableThis table contains gx2Gs1000 specific parameters with
nominal and current values. SEQUENCE OF Gx2gs1000FactoryEntry .1.3.6.1.4.1.1166.6.1.2.36.5 |
gx2gs1000FactoryEntryThis list contains Factory parameters and descriptions. Gx2gs1000FactoryEntry .1.3.6.1.4.1.1166.6.1.2.36.5.4 |
gx2gs1000FactoryTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.1 |
gs1000bootControlByteValueThe value of this object indicates which bank the firmware
is currently being boot from.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.2 |
gs1000bootStatusByteValueThis object indicates the status of the last bootro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.3 |
gs1000bank1CRCValueThis object provides the CRC code of bank 0.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.4 |
gs1000bank2CRCValueThis object provides the CRC code of bank 1.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.5 |
gs1000prgEEPROMByteValueThis object indicates if the EEPROM has been programmedro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.6 |
gs1000factoryCRCValueThis object provides the CRC code for the Factory data.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.7 |
gs1000calculateCRCValueThis object indicates which of the Emnums will have the CRC calculated.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.36.5.4.8 |
gs1000hourMeterValueThis object provides the hour meter reading of the module.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.9 |
gs1000flashPrgCntAValueThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.10 |
gs1000flashPrgCntBValueThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.36.5.4.11 |
gs1000flashBankARevValueThis object provides the revision of flash bank 0.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.5.4.12 |
gs1000flashBankBRevValueThis object provides the revision of flash bank 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.36.5.4.13 |