OMNI-gx2Dm200-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
168
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
168 total| Object Name |
|---|
trapDM200ConfigChangeIntegerThis trap is issued if configuration of a single variable
with integer type was changed (via ANY interface).
TrapChangedValueInteger variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.1 |
trapDM200ConfigChangeDisplayStringThis trap is issued if configuration of a single variable
with DispalayString type was changed (via ANY interface).
TrapChangedValueDisplayString variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.2 |
trapDM200fanCurrentAlarmThis trap is issued when the Fan Current
parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.3 |
trapDM200ModuleTempAlarmThis trap is issued when the Module Temperature parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.4 |
trapDM200omiOffsetAlarmThis trap is issued when the OMI Offset goes out of range. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.5 |
trapDM200tecCurrentAlarmThis trap is issued when the TEC Current parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.6 |
trapDM200LaserCurrentAlarmThis trap is issued when the Laser Current parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.7 |
trapDM200LaserTempAlarmThis trap is issued when the Laser Temp parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.8 |
trapDM200LaserPowerAlarmThis trap is issued when the Laser Power parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.9 |
trapDM200FlashAlarmThis trap is issued when the Laser Modules detects an error during
Flash memory operations. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.10 |
trapDM200BankBootAlarmThis trap is issued when the Laser Modules detects an error while booting
from bank 0 or bank 1. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.11 |
trapDM200AlarmDataCRCAlarmThis trap is issued when the Alarm Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.12 |
trapDM200FactoryDataCRCAlarmThis trap is issued when the Factory Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.13 |
trapDM200CalDataCRCAlarmThis trap is issued when the Cal Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.14 |
trapDM200ResetFacDefaultThis trap is issued when the DM200 resets to factory defaults TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.15 |
trapDM200UserRFOffAlarmThis trap is issued when the the User RF is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.16 |
trapDM200UserOpticalOffAlarmThis trap is issued when the User Optical Power is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.17 |
trapDM200UserSBSOffAlarmThis trap is issued when the User SBS is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.18 |
trapDM200RFInputAlarmThis trap is issued when the Laser Modules RF input parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.19 |
trapDM200RFOverloadAlarmThis trap is issued when the Laser Modules RF overload parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.19.0.20 |
gx2Dm200Descriptor OBJECT IDENTIFIER .1.3.6.1.4.1.1166.6.1.2.19.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1166.6.1.2.19.1 |
gx2Dm200AnalogTableThis table contains gx2Dm200 specific parameters with
nominal and current values. SEQUENCE OF Gx2Dm200AnalogEntry .1.3.6.1.4.1.1166.6.1.2.19.2 |
gx2Dm200AnalogEntryThis list contains the analog parameters and descriptions. Gx2Dm200AnalogEntry .1.3.6.1.4.1.1166.6.1.2.19.2.1 |
gx2Dm200AnalogTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.2.1.1 |
dm200labelOffsetNomMonitorThe value of this object provides the label of the
Offset Monitor Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.2 |
dm200uomOffsetNomMonitorThe value of this object provides the Unit of Measure of the
Offset Monitor Analog parameter. The unit of measure for
this parameter is dBro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.3 |
dm200majorHighOffsetNomMonitorThe value of this object provides the Major High alarm value
of the Offset Monitor Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.4 |
dm200majorLowOffsetNomMonitorThe value of this object provides the Major Low alarm value
of the Offset Monitor Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.5 |
dm200minorHighOffsetNomMonitorThe value of this object provides the Minor High alarm value
of the Offset Monitor Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.6 |
dm200minorLowOffsetNomMonitorThe value of this object provides the Minor Low alarm value
of the Offset Monitor Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.7 |
dm200currentValueOffsetNomMonitorThe value of this object provides the Current value
of the Offset Monitor Power Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.8 |
dm200stateFlagOffsetNomMonitorThe value of this object provides the state
of the Offset Monitor Power Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.9 |
dm200minValueOffsetNomMonitorThe value of this object provides the minimum value
the Offset Monitor Power Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.10 |
dm200maxValueOffsetNomMonitorThe value of this object provides the maximum value
the Offset Monitor Power Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.11 |
dm200alarmStateOffsetNomMonitorThe value of this object provides the curent alarm state of
the Offset Monitor Power Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.12 |
dm200labelAttenSettingThe value of this object provides the label of the
Attenuator Setting Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.13 |
dm200uomAttenSettingThe value of this object provides the Unit of Measure of the
Attenuator Setting Analog parameter. The unit of measure for
this parameter is dBro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.14 |
dm200majorHighAttenSettingThe value of this object provides the Major High alarm value
of the Attenuator Setting Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.15 |
dm200majorLowAttenSettingThe value of this object provides the Major Low alarm value
of the Attenuator Setting Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.16 |
dm200minorHighAttenSettingThe value of this object provides the Minor High alarm value
of the Attenuator Setting Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.17 |
dm200minorLowAttenSettingThe value of this object provides the Minor Low alarm value
of the Attenuator Setting Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.18 |
dm200currentValueAttenSettingThe value of this object provides the Current value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as an
IEEE 32 bit number.rw Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.19 |
dm200stateFlagAttenSettingThe value of this object provides the state
of the Attenuator Setting Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.20 |
dm200minValueAttenSettingThe value of this object provides the minimum value
the Attenuator Setting Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.21 |
dm200maxValueAttenSettingThe value of this object provides the maximum value
the Attenuator Setting Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.22 |
dm200alarmStateAttenSettingThe value of this object provides the curent alarm state of
the Attenuator Setting Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.23 |
dm200labelLaserPowerThe value of this object provides the label of the
Laser Optical Power Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.24 |
dm200uomLaserPowerThe value of this object provides the Unit of Measure of the
Laser Optical Power Analog parameter. The unit of measure for
this parameter is dBmro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.25 |
dm200majorHighLaserPowerThe value of this object provides the Major High alarm value
of the Laser Optical Power Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.26 |
dm200majorLowLaserPowerThe value of this object provides the Major Low alarm value
of the Laser Optical Power Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.27 |
dm200minorHighLaserPowerThe value of this object provides the Minor High alarm value
of the Laser Optical Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.28 |
dm200minorLowLaserPowerThe value of this object provides the Minor Low alarm value
of the Laser Optical Power Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.29 |
dm200currentValueLaserPowerThe value of this object provides the Current value
of the Laser Optical Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.30 |
dm200stateFlagLaserPowerThe value of this object provides the state
of the Laser Optical Power Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.31 |
dm200minValueLaserPowerThe value of this object provides the minimum value
the Laser Optical Power Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.32 |
dm200maxValueLaserPowerThe value of this object provides the maximum value
the Laser Optical Power Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.33 |
dm200alarmStateLaserPowerThe value of this object provides the curent alarm state of
the Laser Optical Power Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.34 |
dm200labelLaserTempThe value of this object provides the label of the
Laser Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.35 |
dm200uomLaserTempThe value of this object provides the Unit of Measure of the
Laser Temperature Analog parameter. The unit of measure for
this parameter is degrees Cro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.36 |
dm200majorHighLaserTempThe value of this object provides the Major High alarm value
of the Laser Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.37 |
dm200majorLowLaserTempThe value of this object provides the Major Low alarm value
of the Laser Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.38 |
dm200minorHighLaserTempThe value of this object provides the Minor High alarm value
of the Laser Temperature Analog parameter.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.39 |
dm200minorLowLaserTempThe value of this object provides the Minor Low alarm value
of the Laser Temperature Analog parameter.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.40 |
dm200currentValueLaserTempThe value of this object provides the Current value
of the Laser Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.41 |
dm200stateFlagLaserTempThe value of this object provides the state
of the Laser Temperature Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.42 |
dm200minValueLaserTempThe value of this object provides the minimum value
the Laser Temperature Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.43 |
dm200maxValueLaserTempThe value of this object provides the maximum value
the Laser Temperature Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.44 |
dm200alarmStateLaserTempThe value of this object provides the curent alarm state of
the Laser Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.45 |
dm200labelLaserCurrentThe value of this object provides the label of the
Laser Bias Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.46 |
dm200uomLaserCurrentThe value of this object provides the Unit of Measure of the
Laser Bias Current Analog parameter. The unit of measure for
this parameter is mAro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.47 |
dm200majorHighLaserCurrentThe value of this object provides the Major High alarm value
of the Laser Bias Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.48 |
dm200majorLowLaserCurrentThe value of this object provides the Major Low alarm value
of the Laser Bias Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.49 |
dm200minorHighLaserCurrentThe value of this object provides the Minor High alarm value
of the Laser Bias Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.50 |
dm200minorLowLaserCurrentThe value of this object provides the Minor Low alarm value
of the Laser Bias Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.51 |
dm200currentValueLaserCurrentThe value of this object provides the Current value
of the Laser Bias Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.52 |
dm200stateFlagLaserCurrentThe value of this object provides the state
of the Laser Bias Current Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.53 |
dm200minValueLaserCurrentThe value of this object provides the minimum value
the Laser Bias Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.54 |
dm200maxValueLaserCurrentThe value of this object provides the maximum value
the Laser Bias Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.55 |
dm200alarmStateLaserCurrentThe value of this object provides the curent alarm state of
the Laser Bias Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.56 |
dm200labelTecCurrentThe value of this object provides the label of the
TEC Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.57 |
dm200uomTecCurrentThe value of this object provides the Unit of Measure of the
TEC Current Analog parameter. The unit of measure for
this parameter is mAro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.58 |
dm200majorHighTecCurrentThe value of this object provides the Major High alarm value
of the TEC Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.59 |
dm200majorLowTecCurrentThe value of this object provides the Major Low alarm value
of the TEC Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.60 |
dm200minorHighTecCurrentThe value of this object provides the Minor High alarm value
of the TEC Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.61 |
dm200minorLowTecCurrentThe value of this object provides the Minor Low alarm value
of the TEC Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.62 |
dm200currentValueTecCurrentThe value of this object provides the Current value
of the TEC Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.63 |
dm200stateFlagTecCurrentThe value of this object provides the state
of the TEC Current Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.64 |
dm200minValueTecCurrentThe value of this object provides the minimum value
the TEC Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.65 |
dm200maxValueTecCurrentThe value of this object provides the maximum value
the TEC Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.66 |
dm200alarmStateTecCurrentThe value of this object provides the curent alarm state of
the TEC Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.67 |
dm200labelModTempThe value of this object provides the label of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.68 |
dm200uomModTempThe value of this object provides the Unit of Measure of the
Module Temperature Analog parameter. The unit of measure for
this parameter is degrees Cro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.69 |
dm200majorHighModTempThe value of this object provides the Major High alarm value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.70 |
dm200majorLowModTempThe value of this object provides the Major Low alarm value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.71 |
dm200minorHighModTempThe value of this object provides the Minor High alarm value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.72 |
dm200minorLowModTempThe value of this object provides the Minor Low alarm value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.73 |
dm200currentValueModTempThe value of this object provides the Current value
of the Module Temperature Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.74 |
dm200stateFlagModTempThe value of this object provides the state
of the Module Temperature Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.75 |
dm200minValueModTempThe value of this object provides the minimum value
the Module Temperature Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.76 |
dm200maxValueModTempThe value of this object provides the maximum value
the Module Temperature Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.77 |
dm200alarmStateModTempThe value of this object provides the curent alarm state of
the Module Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.78 |
dm200labelFanCurrentThe value of this object provides the label of the
Fan Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.79 |
dm200uomFanCurrentThe value of this object provides the Unit of Measure of the
Fan Current Analog parameter. The unit of measure for
this parameter is mAro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.2.1.80 |
dm200majorHighFanCurrentThe value of this object provides the Major High alarm value
of the Fan Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.81 |
dm200majorLowFanCurrentThe value of this object provides the Major Low alarm value
of the Fan Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.82 |
dm200minorHighFanCurrentThe value of this object provides the Minor High alarm value
of the Fan Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.83 |
dm200minorLowFanCurrentThe value of this object provides the Minor Low alarm value
of the Fan Current Analog parameter.
This object is not used by this module and always returns invalid
float value of 0xFFFFFFFF . This object is kept here for persistence.roobsolete Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.84 |
dm200currentValueFanCurrentThe value of this object provides the Current value
of the Fan Current Analog parameter.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.85 |
dm200stateFlagFanCurrentThe value of this object provides the state
of the Fan Current Analog parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.86 |
dm200minValueFanCurrentThe value of this object provides the minimum value
the Fan Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.87 |
dm200maxValueFanCurrentThe value of this object provides the maximum value
the Fan Current Analog parameter can achive.ro Float .1.3.6.1.4.1.1166.6.1.2.19.2.1.88 |
dm200alarmStateFanCurrentThe value of this object provides the curent alarm state of
the Fan Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.2.1.89 |
gx2Dm200DigitalTableThis table contains gx2Dm200m specific parameters with
nominal and current values. SEQUENCE OF Gx2Dm200DigitalEntry .1.3.6.1.4.1.1166.6.1.2.19.3 |
gx2Dm200DigitalEntryThis list contains digital parameters and descriptions. Gx2Dm200DigitalEntry .1.3.6.1.4.1.1166.6.1.2.19.3.2 |
gx2Dm200DigitalTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.3.2.1 |
dm200labelRfInputThe value of this object provides the label of the
RF Input Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.3.2.2 |
dm200enumRfInputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.3.2.3 |
dm200valueRfInputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.19.3.2.4 |
dm200stateflagRfInputThe value of this object provides the state
of the RF Input Control Digital parameter. (1-hidden
2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.3.2.5 |
dm200labelOptOutputThe value of this object provides the label of the
Optical Output Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.3.2.6 |
dm200enumOptOutputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.3.2.7 |
dm200valueOptOutputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.19.3.2.8 |
dm200stateflagOptOutputThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.3.2.9 |
dm200labelSbsControlThe value of this object provides the label of the
SBS Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.3.2.10 |
dm200enumSbsControlThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.3.2.11 |
dm200valueSbsControlThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.19.3.2.12 |
dm200stateflagSbsControlThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.3.2.13 |
dm200labelFactoryDefaultThe value of this object provides the label of the
Factory Default Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.3.2.14 |
dm200enumFactoryDefaultThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value
of 1..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.3.2.15 |
dm200valueFactoryDefaultThe value of this object is the current value of the parameter.
Return value is meaninglessrw Enumeration .1.3.6.1.4.1.1166.6.1.2.19.3.2.16 |
dm200stateflagFactoryDefaultThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.3.2.17 |
gx2Dm200StatusTableThis table contains gx2Dm200 specific parameters with
nominal and current values. SEQUENCE OF Gx2Dm200StatusEntry .1.3.6.1.4.1.1166.6.1.2.19.4 |
gx2Dm200StatusEntryThis list contains Status parameters and descriptions. Gx2Dm200StatusEntry .1.3.6.1.4.1.1166.6.1.2.19.4.3 |
gx2Dm200StatusTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.4.3.1 |
dm200labelBootThe value of this object provides the label of the
Boot Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.4.3.2 |
dm200valueBootThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.3 |
dm200stateflagBootThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.4 |
dm200labelFlashThe value of this object provides the label of the
Flash Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.4.3.5 |
dm200valueFlashThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.6 |
dm200stateflagFlashThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.7 |
dm200labelFactoryDataCRCThe value of this object provides the label of the
Factory Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.4.3.8 |
dm200valueFactoryDataCRCThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.9 |
dm200stateflagFactoryDataCRCThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.10 |
dm200labelLaserDataCRCThe value of this object provides the label of the
Laser Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.4.3.11 |
dm200valueLaserDataCRCThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.12 |
dm200stateflagLaserDataCRCThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.13 |
dm200labelAlarmDataCrcThe value of this object provides the label of the
Alarm Data Crc parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.4.3.14 |
dm200valueAlarmDataCrcThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.15 |
dm200stateflagAlarmDataCrcThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.16 |
dm200labelRFInputStatusThe value of this object provides the label of the
Alarm Data Crc parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.4.3.17 |
dm200valueRFInputStatusThe value of this object provides the current state of
the parameter (1-ok, 2-undetermined
3-warning, 4-minor, 5-major, 6-critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.18 |
dm200stateflagRFInputStatusThe value of this object provides the state
of the the parameter. (1-hidden, 2-read-only, 3-updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.19.4.3.19 |
gx2Dm200FactoryTableThis table contains gx2Dm200 specific parameters with
nominal and current values. SEQUENCE OF Gx2Dm200FactoryEntry .1.3.6.1.4.1.1166.6.1.2.19.5 |
gx2Dm200FactoryEntryThis list contains Factory parameters and descriptions. Gx2Dm200FactoryEntry .1.3.6.1.4.1.1166.6.1.2.19.5.4 |
gx2Dm200FactoryTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.1 |
dm200bootControlByteThe value of this object indicates which bank the firmware
is currently being boot from.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.2 |
dm200bootStatusByteThis object indicates the status of the last boot. Bit 2 =
Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail
and Bit 0 = Bank 0 Fail (0 = Pass, 1 = Fail)ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.3 |
dm200bank1CRCThis object provides the CRC code of bank 0. The display
formate for the data is Hex.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.4 |
dm200bank2CRCThis object provides the CRC code of bank 1.The display
formate for the data is Hex.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.5 |
dm200prgEEPROMByteThis object indicates if the EEPROM has been programmedro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.6 |
dm200factoryCRCThis object provides the CRC code for the Factory data.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.7 |
dm200calculateCRCThis object indicates which of the Enums will have the CRC
calculated.roobsolete Enumeration .1.3.6.1.4.1.1166.6.1.2.19.5.4.8 |
dm200hourMeterThis object provides the hour meter reading of the module.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.9 |
dm200flashPrgCntAThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.10 |
dm200flashPrgCntBThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.19.5.4.11 |
dm200flashBankARevThis object provides the revision of flash bank 0. The rev is
2 characters.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.5.4.12 |
dm200flashBankBRevThis object provides the revision of flash bank 1. The rev is
2 characters.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.19.5.4.13 |