OMNI-gx2Dm1000-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for OMNI-gx2Dm1000-MIB.
183
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
183 total| Object Name |
|---|
trapDM1000ConfigChangeIntegerThis trap is issued if configuration of a single variable
with integer type was changed (via ANY interface).
TrapChangedValueInteger variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.1 |
trapDM1000ConfigChangeDisplayStringThis trap is issued if configuration of a single variable
with DispalayString type was changed (via ANY interface).
TrapChangedValueDisplayString variable may contain current reading
of that variable.
trapPerceivedSeverity - 'indeterminate' TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.2 |
trapDM1000fanCurrentAlarmThis trap is issued when the Fan Current
parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.3 |
trapDM1000ModuleTempAlarmThis trap is issued when the Module Temperature parameter goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.4 |
trapDM1000omiOffsetAlarmThis trap is issued when the OMI Offset goes out of range. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.5 |
trapDM1000tecCurrentAlarmThis trap is issued when the TEC Current parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.6 |
trapDM1000LaserCurrentAlarmThis trap is issued when the Laser Current parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.7 |
trapDM1000LaserTempAlarmThis trap is issued when the Laser Temp parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.8 |
trapDM1000LaserPowerAlarmThis trap is issued when the Laser Power parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.9 |
trapDM1000FlashAlarmThis trap is issued when the Laser Modules detects an error during
Flash memory operations. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.10 |
trapDM1000BankBootAlarmThis trap is issued when the Laser Modules detects an error while booting
from bank 0 or bank 1. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.11 |
trapDM1000AlarmDataCRCAlarmThis trap is issued when the Alarm Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.12 |
trapDM1000FactoryDataCRCAlarmThis trap is issued when the Factory Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.13 |
trapDM1000CalDataCRCAlarmThis trap is issued when the Cal Data CRC is incorrect. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.14 |
trapDM1000ResetFacDefaultThis trap is issued when the DM1000 resets to factory defaults TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.15 |
trapDM1000UserRFOffAlarmThis trap is issued when the the User RF is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.16 |
trapDM1000UserOpticalOffAlarmThis trap is issued when the User Optical Power is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.17 |
trapDM1000UserSBSOffAlarmThis trap is issued when the User SBS is turned off. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.18 |
trapDM1000RFInputAlarmThis trap is issued when the Laser Modules RF input parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.19 |
trapDM1000RFOverloadAlarmThis trap is issued when the Laser Modules RF overload parameter
goes out of range.
trapAdditionalInfoInteger variable contains current reading of
the this parameter. TRAP-TYPE .1.3.6.1.4.1.1166.6.1.2.28.0.20 |
gx2Dm1000Descriptor OBJECT IDENTIFIER .1.3.6.1.4.1.1166.6.1.2.28.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1166.6.1.2.28.1 |
gx2Dm1000AnalogTableThis table contains gx2Dm1000 specific parameters with
nominal and current values. SEQUENCE OF Gx2Dm1000AnalogEntry .1.3.6.1.4.1.1166.6.1.2.28.2 |
gx2Dm1000AnalogEntryThis list contains the analog parameters and descriptions. Gx2Dm1000AnalogEntry .1.3.6.1.4.1.1166.6.1.2.28.2.1 |
gx2Dm1000AnalogTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.2.1.1 |
dm1000labelOffsetNomMonitorThe value of this object provides the label of the
Offset Monitor Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.2 |
dm1000uomOffsetNomMonitorThe value of this object provides the Unit of Measure of the
Offset Monitor Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.3 |
dm1000majorHighOffsetNomMonitorThe value of this object provides the Major High alarm value
of the Offset Monitor Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.4 |
dm1000majorLowOffsetNomMonitorThe value of this object provides the Major Low alarm value
of the Offset Monitor Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.5 |
dm1000minorHighOffsetNomMonitorThe value of this object provides the Minor High alarm value
of the Offset Monitor Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.6 |
dm1000minorLowOffsetNomMonitorThe value of this object provides the Minor Low alarm value
of the Offset Monitor Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.7 |
dm1000currentValueOffsetNomMonitorThe value of this object provides the Current value
of the Offset Monitor Power Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.8 |
dm1000stateFlagOffsetNomMonitorThe value of this object provides the state
of the Offset Monitor Power Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.9 |
dm1000minValueOffsetNomMonitorThe value of this object provides the minimum value
the Offset Monitor Power Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.10 |
dm1000maxValueOffsetNomMonitorThe value of this object provides the maximum value
the Offset Monitor Power Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.11 |
dm1000alarmStateOffsetNomMonitorThe value of this object provides the curent alarm state of
the Offset Monitor Power Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.12 |
dm1000labelOffsetNomCntThe value of this object provides the label of the
Offset Control Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.13 |
dm1000uomOffsetNomCntThe value of this object provides the Unit of Measure of the
Offset Control Analog parameter..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.14 |
dm1000majorHighOffsetNomCntThe value of this object provides the Major High alarm value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.15 |
dm1000majorLowOffsetNomCntThe value of this object provides the Major Low alarm value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.16 |
dm1000minorHighOffsetNomCntThe value of this object provides the Minor High alarm value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.17 |
dm1000minorLowOffsetNomCntThe value of this object provides the Minor Low alarm value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.18 |
dm1000currentValueOffsetNomCntThe value of this object provides the Current value
of the Offset Control Analog parameter.
This value is a floating point number that is represented as an IEEE 32 bit number.rw Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.19 |
dm1000stateFlagOffsetNomCntThe value of this object provides the state
of the Offset Control Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.20 |
dm1000minValueOffsetNomCntThe value of this object provides the minimum value
the Offset Control Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.21 |
dm1000maxValueOffsetNomCntThe value of this object provides the maximum value
the Offset Control Analog parameter can achive.
This value is a floating point number that is represented as an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.22 |
dm1000alarmStateOffsetNomCntThe value of this object provides the curent alarm state of
the Offset Control Analog parameter.roobsolete Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.23 |
dm1000labelAttenSettingThe value of this object provides the label of the
Attenuator Setting Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.24 |
dm1000uomAttenSettingThe value of this object provides the Unit of Measure of the
Attenuator Setting Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.25 |
dm1000majorHighAttenSettingThe value of this object provides the Major High alarm value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.26 |
dm1000majorLowAttenSettingThe value of this object provides the Major Low alarm value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.27 |
dm1000minorHighAttenSettingThe value of this object provides the Minor High alarm value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.28 |
dm1000minorLowAttenSettingThe value of this object provides the Minor Low alarm value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.29 |
dm1000currentValueAttenSettingThe value of this object provides the Current value
of the Attenuator Setting Analog parameter.
This value is a floating point number that is represented as an
IEEE 32 bit number.rw Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.30 |
dm1000stateFlagAttenSettingThe value of this object provides the state
of the Attenuator Setting Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.31 |
dm1000minValueAttenSettingThe value of this object provides the minimum value
the Attenuator Setting Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.32 |
dm1000maxValueAttenSettingThe value of this object provides the maximum value
the Attenuator Setting Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.33 |
dm1000alarmStateAttenSettingThe value of this object provides the curent alarm state of
the Attenuator Setting Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.34 |
dm1000labelLaserPowerThe value of this object provides the label of the
Laser Optical Power Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.35 |
dm1000uomLaserPowerThe value of this object provides the Unit of Measure of the
Laser Optical Power Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.36 |
dm1000majorHighLaserPowerThe value of this object provides the Major High alarm value
of the Laser Optical Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.37 |
dm1000majorLowLaserPowerThe value of this object provides the Major Low alarm value
of the Laser Optical Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.38 |
dm1000minorHighLaserPowerThe value of this object provides the Minor High alarm value
of the Laser Optical Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.39 |
dm1000minorLowLaserPowerThe value of this object provides the Minor Low alarm value
of the Laser Optical Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.40 |
dm1000currentValueLaserPowerThe value of this object provides the Current value
of the Laser Optical Power Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.41 |
dm1000stateFlagLaserPowerThe value of this object provides the state
of the Laser Optical Power Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.42 |
dm1000minValueLaserPowerThe value of this object provides the minimum value
the Laser Optical Power Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.43 |
dm1000maxValueLaserPowerThe value of this object provides the maximum value
the Laser Optical Power Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.44 |
dm1000alarmStateLaserPowerThe value of this object provides the curent alarm state of
the Laser Optical Power Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.45 |
dm1000labelLaserTempThe value of this object provides the label of the
Laser Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.46 |
dm1000uomLaserTempThe value of this object provides the Unit of Measure of the
Laser Temperature Analog parameter..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.47 |
dm1000majorHighLaserTempThe value of this object provides the Major High alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.48 |
dm1000majorLowLaserTempThe value of this object provides the Major Low alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.49 |
dm1000minorHighLaserTempThe value of this object provides the Minor High alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.50 |
dm1000minorLowLaserTempThe value of this object provides the Minor Low alarm value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.51 |
dm1000currentValueLaserTempThe value of this object provides the Current value
of the Laser Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.52 |
dm1000stateFlagLaserTempThe value of this object provides the state
of the Laser Temperature Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.53 |
dm1000minValueLaserTempThe value of this object provides the minimum value
the Laser Temperature Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.54 |
dm1000maxValueLaserTempThe value of this object provides the maximum value
the Laser Temperature Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.55 |
dm1000alarmStateLaserTempThe value of this object provides the curent alarm state of
the Laser Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.56 |
dm1000labelLaserCurrentThe value of this object provides the label of the
Laser Bias Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.57 |
dm1000uomLaserCurrentThe value of this object provides the Unit of Measure of the
Laser Bias Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.58 |
dm1000majorHighLaserCurrentThe value of this object provides the Major High alarm value
of the Laser Bias Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.59 |
dm1000majorLowLaserCurrentThe value of this object provides the Major Low alarm value
of the Laser Bias Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.60 |
dm1000minorHighLaserCurrentThe value of this object provides the Minor High alarm value
of the Laser Bias Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.61 |
dm1000minorLowLaserCurrentThe value of this object provides the Minor Low alarm value
of the Laser Bias Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.62 |
dm1000currentValueLaserCurrentThe value of this object provides the Current value
of the Laser Bias Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.63 |
dm1000stateFlagLaserCurrentThe value of this object provides the state
of the Laser Bias Current Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.64 |
dm1000minValueLaserCurrentThe value of this object provides the minimum value
the Laser Bias Current Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.65 |
dm1000maxValueLaserCurrentThe value of this object provides the maximum value
the Laser Bias Current Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.66 |
dm1000alarmStateLaserCurrentThe value of this object provides the curent alarm state of
the Laser Bias Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.67 |
dm1000labelTecCurrentThe value of this object provides the label of the
TEC Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.68 |
dm1000uomTecCurrentThe value of this object provides the Unit of Measure of the
TEC Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.69 |
dm1000majorHighTecCurrentThe value of this object provides the Major High alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.70 |
dm1000majorLowTecCurrentThe value of this object provides the Major Low alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.71 |
dm1000minorHighTecCurrentThe value of this object provides the Minor High alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.72 |
dm1000minorLowTecCurrentThe value of this object provides the Minor Low alarm value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.73 |
dm1000currentValueTecCurrentThe value of this object provides the Current value
of the TEC Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.74 |
dm1000stateFlagTecCurrentThe value of this object provides the state
of the TEC Current Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.75 |
dm1000minValueTecCurrentThe value of this object provides the minimum value
the TEC Current Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.76 |
dm1000maxValueTecCurrentThe value of this object provides the maximum value
the TEC Current Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.77 |
dm1000alarmStateTecCurrentThe value of this object provides the curent alarm state of
the TEC Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.78 |
dm1000labelModTempThe value of this object provides the label of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.79 |
dm1000uomModTempThe value of this object provides the Unit of Measure of the
Module Temperature Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.80 |
dm1000majorHighModTempThe value of this object provides the Major High alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.81 |
dm1000majorLowModTempThe value of this object provides the Major Low alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.82 |
dm1000minorHighModTempThe value of this object provides the Minor High alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.83 |
dm1000minorLowModTempThe value of this object provides the Minor Low alarm value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.84 |
dm1000currentValueModTempThe value of this object provides the Current value
of the Module Temperature Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.85 |
dm1000stateFlagModTempThe value of this object provides the state
of the Module Temperature Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.86 |
dm1000minValueModTempThe value of this object provides the minimum value
the Module Temperature Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.87 |
dm1000maxValueModTempThe value of this object provides the maximum value
the Module Temperature Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.88 |
dm1000alarmStateModTempThe value of this object provides the curent alarm state of
the Module Temperature Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.89 |
dm1000labelFanCurrentThe value of this object provides the label of the
Fan Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.90 |
dm1000uomFanCurrentThe value of this object provides the Unit of Measure of the
Fan Current Analog parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.2.1.91 |
dm1000majorHighFanCurrentThe value of this object provides the Major High alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.92 |
dm1000majorLowFanCurrentThe value of this object provides the Major Low alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.93 |
dm1000minorHighFanCurrentThe value of this object provides the Minor High alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.94 |
dm1000minorLowFanCurrentThe value of this object provides the Minor Low alarm value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number. All F's indicate the parameter is unusedroobsolete Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.95 |
dm1000currentValueFanCurrentThe value of this object provides the Current value
of the Fan Current Analog parameter.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.96 |
dm1000stateFlagFanCurrentThe value of this object provides the state
of the Fan Current Analog parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.97 |
dm1000minValueFanCurrentThe value of this object provides the minimum value
the Fan Current Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.98 |
dm1000maxValueFanCurrentThe value of this object provides the maximum value
the Fan Current Analog parameter can achive.
This value is a floating point number that is represented as
an IEEE 32 bit number.ro Float .1.3.6.1.4.1.1166.6.1.2.28.2.1.99 |
dm1000alarmStateFanCurrentThe value of this object provides the curent alarm state of
the Fan Current Analog parameter.ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.2.1.100 |
gx2Dm1000DigitalTableThis table contains gx2Dm1000m specific parameters with
nominal and current values. SEQUENCE OF Gx2Dm1000DigitalEntry .1.3.6.1.4.1.1166.6.1.2.28.3 |
gx2Dm1000DigitalEntryThis list contains digital parameters and descriptions. Gx2Dm1000DigitalEntry .1.3.6.1.4.1.1166.6.1.2.28.3.2 |
gx2Dm1000DigitalTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.3.2.1 |
dm1000labelRfInputThe value of this object provides the label of the
RF Input Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.2 |
dm1000enumRfInputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.3 |
dm1000valueRfInputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.4 |
dm1000stateflagRfInputThe value of this object provides the state
of the RF Input Control Digital parameter. (0-Hidden
1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.5 |
dm1000labelOptOutputThe value of this object provides the label of the
Optical Output Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.6 |
dm1000enumOptOutputThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.7 |
dm1000valueOptOutputThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.8 |
dm1000stateflagOptOutputThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.9 |
dm1000labelSbsControlThe value of this object provides the label of the
SBS Control Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.10 |
dm1000enumSbsControlThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.11 |
dm1000valueSbsControlThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.12 |
dm1000stateflagSbsControlThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.13 |
dm1000labelLaserModeThe value of this object provides the label of the
Laser Mode Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.14 |
dm1000enumLaserModeThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value of 1.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.15 |
dm1000valueLaserModeThe value of this object is the current value of the parameter.rw Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.16 |
dm1000stateflagLaserModeThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.17 |
dm1000labelFactoryDefaultThe value of this object provides the label of the
Factory Default Digital parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.18 |
dm1000enumFactoryDefaultThe value of this object represents the Enumeration values
possible for the Digital parameter. Each Enumerated values is
separated by a common. The first value has a enumerated value
of 1..ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.3.2.19 |
dm1000valueFactoryDefaultThe value of this object is the current value of the parameter.
Return value is meaninglessrw Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.20 |
dm1000stateflagFactoryDefaultThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.3.2.21 |
gx2Dm1000StatusTableThis table contains gx2Dm1000 specific parameters with
nominal and current values. SEQUENCE OF Gx2Dm1000StatusEntry .1.3.6.1.4.1.1166.6.1.2.28.4 |
gx2Dm1000StatusEntryThis list contains Status parameters and descriptions. Gx2Dm1000StatusEntry .1.3.6.1.4.1.1166.6.1.2.28.4.3 |
gx2Dm1000StatusTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.4.3.1 |
dm1000labelBootThe value of this object provides the label of the
Boot Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.4.3.2 |
dm1000valueBootThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.3 |
dm1000stateflagBootThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.4 |
dm1000labelFlashThe value of this object provides the label of the
Flash Status Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.4.3.5 |
dm1000valueFlashThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.6 |
dm1000stateflagFlashThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.7 |
dm1000labelFactoryDataCRCThe value of this object provides the label of the
Factory Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.4.3.8 |
dm1000valueFactoryDataCRCThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.9 |
dm1000stateflagFactoryDataCRCThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.10 |
dm1000labelLaserDataCRCThe value of this object provides the label of the
Laser Data CRC Status parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.4.3.11 |
dm1000valueLaserDataCRCThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.12 |
dm1000stateflagLaserDataCRCThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.13 |
dm1000labelAlarmDataCrcThe value of this object provides the label of the
Alarm Data Crc parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.4.3.14 |
dm1000valueAlarmDataCrcThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.15 |
dm1000stateflagAlarmDataCrcThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.16 |
dm1000labelRFInputStatusThe value of this object provides the label of the
Alarm Data Crc parameter.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.4.3.17 |
dm1000valueRFInputStatusThe value of this object provides the current state of
the parameter (0-Ok, 1-Undetermined
2-Warning, 3-Minor, 4-Major, 5-Critical).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.18 |
dm1000stateflagRFInputStatusThe value of this object provides the state
of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).ro Enumeration .1.3.6.1.4.1.1166.6.1.2.28.4.3.19 |
gx2Dm1000FactoryTableThis table contains gx2Dm1000 specific parameters with
nominal and current values. SEQUENCE OF Gx2Dm1000FactoryEntry .1.3.6.1.4.1.1166.6.1.2.28.5 |
gx2Dm1000FactoryEntryThis list contains Factory parameters and descriptions. Gx2Dm1000FactoryEntry .1.3.6.1.4.1.1166.6.1.2.28.5.4 |
gx2Dm1000FactoryTableIndexThe value of this object identifies the network
element. This index is equal to the
hfcCommonTableIndex for the same element.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.1 |
dm1000bootControlByteThe value of this object indicates which bank the firmware
is currently being boot from.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.2 |
dm1000bootStatusByteThis object indicates the status of the last boot. Bit 2 =
Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail
and Bit 0 = Bank 0 Fail (0 = Pass, 1 = Fail)ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.3 |
dm1000bank1CRCThis object provides the CRC code of bank 0. The display
formate for the data is Hex.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.4 |
dm1000bank2CRCThis object provides the CRC code of bank 1.The display
formate for the data is Hex.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.5 |
dm1000prgEEPROMByteThis object indicates if the EEPROM has been programmedro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.6 |
dm1000factoryCRCThis object provides the CRC code for the Factory data.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.7 |
dm1000calculateCRCThis object indicates which of the Enums will have the CRC
calculated.roobsolete Enumeration .1.3.6.1.4.1.1166.6.1.2.28.5.4.8 |
dm1000hourMeterThis object provides the hour meter reading of the module.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.9 |
dm1000flashPrgCntAThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.10 |
dm1000flashPrgCntBThis object provides the number of times Bank 1 flash has been
programmed.ro INTEGER .1.3.6.1.4.1.1166.6.1.2.28.5.4.11 |
dm1000flashBankARevThis object provides the revision of flash bank 0. The rev is
2 characters.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.5.4.12 |
dm1000flashBankBRevThis object provides the revision of flash bank 1. The rev is
2 characters.ro DisplayString .1.3.6.1.4.1.1166.6.1.2.28.5.4.13 |
More MIBs from Gi M I B
Browse all Gi M I BMIBs →APEX-MIB
The APEX-MIB module facilitates the monitoring and management of Cisco Catalyst 9000 series switches, specifically those utilizing the APEX (Advanced Platform for Enterprise eXchange) architecture, by exposing standardized SNMP objects for interface statistics, system resources, and hardware health. This MIB enables network administrators to track real-time performance metrics, including port throughput, error counters, temperature readings, and power supply status, to ensure operational stability and facilitate troubleshooting within the Cisco enterprise switching environment.
1518 objects→
OMNI-gx2dualdrr2x-MIB
Standard SNMP MIB module defining data structures for OMNI-gx2dualdrr2x-MIB.
318 objects→
OMNI-gx2CM-MIB
SNMP MIB module
276 objects→
OMNI-gx2EDFA-MIB
Standard SNMP MIB module defining data structures for OMNI-gx2EDFA-MIB.
272 objects→
OMNI-gx2Rx085BX4-MIB
Standard SNMP MIB module defining data structures for OMNI-gx2Rx085BX4-MIB.
265 objects→
OMNI-gx2Rx200BX4-MIB
SNMP MIB module
265 objects→