MWR-RADIO-MC-MIB
AI MIB Summary
The MWR-RADIO-MC-MIB module manages Cisco Meraki MR wireless access points by exposing contact details and revision tracking metadata for the MWR-RADIO-MC-MIB specification itself. This module serves as a versioning and administrative reference point for the Meraki Radio Management Controller, facilitating the identification of specific firmware or MIB schema revisions deployed on the device.
This specifies the contact information and the revision tracking information for the MIB module version.
Main OID:
mwrRadioMcModIdentity.1.3.6.1.4.1.7262.4.5.1003
63
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
63 total| Object Name |
|---|
mwrRadio OBJECT IDENTIFIER .1.3.6.1.4.1.7262.4.5.12 |
mwrEmcRadioConfigurations OBJECT IDENTIFIER .1.3.6.1.4.1.7262.4.5.12.201 |
mwrEmcRadioConfigurationsTableTable containing radio configurations. SEQUENCE OF MwrEmcRadioConfigurationsEntry .1.3.6.1.4.1.7262.4.5.12.201.1 |
mwrEmcRadioConfigurationsEntryTable entry containing radio channel configurations. MwrEmcRadioConfigurationsEntry .1.3.6.1.4.1.7262.4.5.12.201.1.1 |
mwrEmcRadioConfigIndexA unique value for each radio channel if applicable. RadioInstanceType (MWR-ETHERNET-MIB) .1.3.6.1.4.1.7262.4.5.12.201.1.1.1 |
mwrEmcRadioTxStateRepresents the transmit state of the radio channel.rw EnableType (EQUIPMENT-COMMON-MIB) .1.3.6.1.4.1.7262.4.5.12.201.1.1.2 |
mwrEmcRadioTxPowerThis defines the programmed transmit level of the radio channel. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dB. Notes: - Programmed and Actual transmit power may differ - see mwrEmcRadioActualTxPower.rw Integer32 UNITS "dB" .1.3.6.1.4.1.7262.4.5.12.201.1.1.3 |
mwrEmcRadioTxDownTimeThe amount of time in seconds the radio transmitter is disabled when the mwrEmcRadioTxState is turned off. - Make sure this is set before the mwrEmcRadioTxState is disabled. - If the down time is set to 0, the radio will stay disabled until it is re-enabled again.rw Integer32 UNITS "sec" .1.3.6.1.4.1.7262.4.5.12.201.1.1.4 |
mwrEmcRadioRxFrequencyRepresents the receive Radio frequency in kHz.rw Integer32 UNITS "kHz" .1.3.6.1.4.1.7262.4.5.12.201.1.1.5 |
mwrEmcRadioTxFrequencyRepresents the transmit Radio frequency in kHz.rw Integer32 UNITS "kHz" .1.3.6.1.4.1.7262.4.5.12.201.1.1.6 |
mwrEmcRadioProfileTableTable containing the radio profile configurations. SEQUENCE OF MwrEmcRadioProfileEntry .1.3.6.1.4.1.7262.4.5.12.201.2 |
mwrEmcRadioProfileEntryTable entry containing the radio profile configurations. MwrEmcRadioProfileEntry .1.3.6.1.4.1.7262.4.5.12.201.2.1 |
mwrEmcRadioStandardModeAn index representing the available standard mode of the radio channel. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.4.5.12.201.2.1.1 |
mwrEmcRadioChannelBwAn index representing the available channel bandwidth of the radio channel. DisplayString UNITS "MHz" .1.3.6.1.4.1.7262.4.5.12.201.2.1.2 |
mwrEmcRadioStaticTxProfileAn index representing the available static tx profile of the radio channel. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.4.5.12.201.2.1.3 |
mwrEmcRadioProgrammedProfileRepresents the configured standard mode, channel BW and the TX profile of the radio channel.rw EnableType (EQUIPMENT-COMMON-MIB) .1.3.6.1.4.1.7262.4.5.12.201.2.1.4 |
mwrEmcRadioThresholdAlarmTableTable containing the threshold alarm configurations of the radio channel. SEQUENCE OF MwrEmcRadioThresholdAlarmEntry .1.3.6.1.4.1.7262.4.5.12.201.3 |
mwrEmcRadioThresholdAlarmEntryTable entry containing the threshold alarm configurations of the radio channel. MwrEmcRadioThresholdAlarmEntry .1.3.6.1.4.1.7262.4.5.12.201.3.1 |
mwrEmcRadioThresholdIndexA unique value for each radio channel if applicable. RadioInstanceType (MWR-ETHERNET-MIB) .1.3.6.1.4.1.7262.4.5.12.201.3.1.1 |
mwrEmcRadioRslBelowThresholdParamsRepresents the RSL threshold in dB and the number of seconds the RSL should be below the threshold. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.4.5.12.201.3.1.2 |
mwrEmcRadioTxAboveThresholdParamsRepresents the radio transmit power threshold in dB and the number of seconds threshold must be exceeded. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.4.5.12.201.3.1.3 |
mwrEmcRadioChCfgSynchEnableThis object enables or disables synchronization of the radio configuration on multiple carriers.rw EnableType (EQUIPMENT-COMMON-MIB) .1.3.6.1.4.1.7262.4.5.12.201.4 |
mwrEmcRadioStatus OBJECT IDENTIFIER .1.3.6.1.4.1.7262.4.5.12.202 |
mwrEmcRadioStatusTableTable containing the status of the radio channel. SEQUENCE OF MwrEmcRadioStatusEntry .1.3.6.1.4.1.7262.4.5.12.202.1 |
mwrEmcRadioStatusEntryTable entry containing the status of the radio channel. MwrEmcRadioStatusEntry .1.3.6.1.4.1.7262.4.5.12.202.1.1 |
mwrEmcRadioStatusIndexA unique value for each radio channel if applicable.ro RadioInstanceType (MWR-ETHERNET-MIB) .1.3.6.1.4.1.7262.4.5.12.202.1.1.1 |
mwrEmcRadioOperStatusThe current operational state of the Radio. When radio is fully configured and ready to operate the status will be up.ro Enumeration .1.3.6.1.4.1.7262.4.5.12.202.1.1.2 |
mwrEmcRadioTRSpacingRepresents the difference between the configured TX/RX center frequency of the radio channel.ro Integer32 UNITS "kHz" .1.3.6.1.4.1.7262.4.5.12.202.1.1.3 |
mwrEmcRadioActualTxStatusThis object defines the actual transmit state of the radio channel.ro EnableType (EQUIPMENT-COMMON-MIB) .1.3.6.1.4.1.7262.4.5.12.202.1.1.4 |
mwrEmcRadioRxFreqMinRepresents the minimum radio RX frequency allowed.ro Integer32 UNITS "kHz" .1.3.6.1.4.1.7262.4.5.12.202.1.1.5 |
mwrEmcRadioRxFreqMaxRepresents the maximum radio RX frequency allowed.ro Integer32 UNITS "kHz" .1.3.6.1.4.1.7262.4.5.12.202.1.1.6 |
mwrEmcRadioTxFreqMinRepresents the minimum radio TX frequency allowed.ro Integer32 UNITS "kHz" .1.3.6.1.4.1.7262.4.5.12.202.1.1.7 |
mwrEmcRadioTxFreqMaxRepresents the maximum radio TX frequency allowed.ro Integer32 UNITS "kHz" .1.3.6.1.4.1.7262.4.5.12.202.1.1.8 |
mwrEmcRadioTxPowerMinRepresents the minimum radio Transmit Power allowed.ro Integer32 UNITS "dB" .1.3.6.1.4.1.7262.4.5.12.202.1.1.9 |
mwrEmcRadioTxPowerMaxRepresents the maximum radio Transmit Power allowed.ro Integer32 UNITS "dB" .1.3.6.1.4.1.7262.4.5.12.202.1.1.10 |
mwrEmcRadioLinkStatusThe current operational status of the radio link.ro Enumeration .1.3.6.1.4.1.7262.4.5.12.202.1.1.11 |
mwrEmcRadioPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.7262.4.5.12.203 |
mwrEmcRadioPerfStatsTableTable containing the performance of the radio channel. SEQUENCE OF MwrEmcRadioPerfStatsEntry .1.3.6.1.4.1.7262.4.5.12.203.1 |
mwrEmcRadioPerfStatsEntryTable entry containing the performance of the radio channel. MwrEmcRadioPerfStatsEntry .1.3.6.1.4.1.7262.4.5.12.203.1.1 |
mwrEmcRadioStatsIndexA unique value for each radio channel if applicable. RadioInstanceType (MWR-ETHERNET-MIB) .1.3.6.1.4.1.7262.4.5.12.203.1.1.1 |
mwrEmcRadioTxFramesThe current count of radio frames transmitted.ro Counter64 .1.3.6.1.4.1.7262.4.5.12.203.1.1.2 |
mwrEmcRadioRxGoodFramesThe current count of good radio frames received.ro Counter64 .1.3.6.1.4.1.7262.4.5.12.203.1.1.3 |
mwrEmcRadioRxErrsFramesThe current count of radio frames received in error.ro Counter64 .1.3.6.1.4.1.7262.4.5.12.203.1.1.4 |
mwrEmcRadioRSLAn estimate of the radio RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dBro Integer32 .1.3.6.1.4.1.7262.4.5.12.203.1.1.5 |
mwrEmcRadioEqualizerStressIndicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working.ro Integer32 .1.3.6.1.4.1.7262.4.5.12.203.1.1.6 |
mwrEmcRadioSNRThe absolute value of the estimate of the radio SNR. Divide the value by 10 to get the actual SNR.ro Integer32 UNITS "dB" .1.3.6.1.4.1.7262.4.5.12.203.1.1.7 |
mwrEmcRadioLinkAvailabilityThe amount of time the radio link is up.ro Counter32 UNITS "sec" .1.3.6.1.4.1.7262.4.5.12.203.1.1.8 |
mwrEmcRadioActualTxPowerThis object indicates the running configuration for tx power.ro Integer32 .1.3.6.1.4.1.7262.4.5.12.203.1.1.9 |
mwrEmcRadioActualTxProfileA read-only string specifying the actual value for the TX profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.4.5.12.203.1.1.10 |
mwrEmcRadioPerfStats32BitTableTable containing 32-bit counters of the radio channel. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters. SEQUENCE OF MwrEmcRadioPerfStats32BitEntry .1.3.6.1.4.1.7262.4.5.12.203.2 |
mwrEmcRadioPerfStats32BitEntryTable entry containing 32-bit counters of the radio channel. MwrEmcRadioPerfStats32BitEntry .1.3.6.1.4.1.7262.4.5.12.203.2.1 |
mwrEmcRadioStats32BitIndexA unique value for each radio channel if applicable. RadioInstanceType (MWR-ETHERNET-MIB) .1.3.6.1.4.1.7262.4.5.12.203.2.1.1 |
mwrEmcRadioTxFrames32BitA low capacity 32-bit counter representing the current count of radio frames transmitted.ro Counter32 .1.3.6.1.4.1.7262.4.5.12.203.2.1.2 |
mwrEmcRadioRxGoodFrames32BitA low capacity 32-bit counter representing the current count of radio frames received.ro Counter32 .1.3.6.1.4.1.7262.4.5.12.203.2.1.3 |
mwrEmcRadioRxErrsFrames32BitA low capacity 32-bit counter representing the current count of radio frames received in error.ro Counter32 .1.3.6.1.4.1.7262.4.5.12.203.2.1.4 |
mwrEmcRadioNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7262.4.5.12.204 |
mwrEmcRadioRxLossOfSyncThis notification is raised when radio link loses synchronization on its receiver. The mwrEmcRadioStatusIndex indicates each radio channel. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.4.5.12.204.1 |
mwrEmcRadioFailureThis notification is raised when fault is detected in radio. The reason could be faulty components or invalid configuration. The mwrEmcRadioStatusIndex indicates each radio channel. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.4.5.12.204.2 |
mwrEmcRadioCalUnavailableThis notification is raised when the calibration information is not available in the system. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.4.5.12.204.3 |
mwrEmcRadioRslBelowThresholdThis notification is raised when the receive signal level of the radio link is below the user configured limit. The mwrEmcRadioStatusIndex indicates each radio channel. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.4.5.12.204.4 |
mwrEmcRadioTxlAboveThresholdThis notification is raised when the radio transmit power level exceeds the user set limit. The mwrEmcRadioStatusIndex indicates each radio channel. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.4.5.12.204.5 |
mwrEmcRadioConfigMismatchThis notification is raised when the radio configuration between the peers is mismatched. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.4.5.12.204.6 |
mwrRadioMcModIdentityThis specifies the contact information and the revision tracking information for the MIB module version. MODULE-IDENTITY .1.3.6.1.4.1.7262.4.5.1003 |