DRAGONWAVE-HORIZON-IDU-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DRAGONWAVE-HORIZON-IDU-MIB.
631
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
631 total| Object Name |
|---|
coldStartA coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered. TRAP-TYPE .1.3.6.1.4.1.3727.20.20.3.1.11.0.0 |
linkDownA linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. TRAP-TYPE .1.3.6.1.4.1.3727.20.20.3.1.11.0.1 |
linkUpA linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. TRAP-TYPE .1.3.6.1.4.1.3727.20.20.3.1.11.0.2 |
horizonIdu OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3 |
SNMPv2-MIB Unknown .1.3.6.1.4.1.7262.2.3 |
hzIduSystem OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1 |
hzIduSysGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.1 |
hzIduResetSystemWriting '1' to this object resets the NIC, Modem, and radio.rw Enumeration .1.3.6.1.4.1.7262.2.3.1.1.1 |
hzIduSaveMIBWriting '1' or 'save' to this object save all MIB values.rw Enumeration .1.3.6.1.4.1.7262.2.3.1.1.2 |
hzIduOperStatusThe current operational state of the system.
Testing indicates that no operational packets can be passed.ro Enumeration .1.3.6.1.4.1.7262.2.3.1.1.3 |
hzIduAirInterfaceEncryptionOBSOLETE. This enables encryption on the air interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.1.1.4 |
hzIduSystemCapacityOptionSets the system capacity options. There are four options:
Select 'singleModem-singleRadio' for a 400Mbps system.
Select 'multiModem-singleRadio' for 800Mbps when the system is equipped with an internal or external IF Coupler.
Select 'multiModem-multiRadio' for 800Mbps when the system is equipped with two radios connected to a Dual Polarization Radio Mount (DPRM).
Select 'singleModem-redundancy' to provide a redundant 400Mbps link using a Redundant Dual Radio Mount (RDRM).
Notes:
Setting the system capacity to 'singleModem-redundancy will fail if the primary path has not been set to either wireless_port1 or wireless_port2.
Setting the system capacity to 'multiModem-multiRadio' will set the transmit power of wireless_port2 to the same transmite power as wireless_port1.rw Enumeration .1.3.6.1.4.1.7262.2.3.1.1.5 |
hzIduSysUpgradeSpeed OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.2 |
hzIduLicensedSpeedUpgradeSpeedAndKeyEnter your apngFLEX key here along with the maximum speed for that key to upgrade the FLEX system.
Format: [speed] [key]
Example: 800 abc123rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.2.1 |
hzIduLicensedSpeedChangesThis object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.ro INTEGER .1.3.6.1.4.1.7262.2.3.1.2.2 |
hzIduSysDowngradeSpeed OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.3 |
hzIduLicensedSpeedDowngradeSpeedReduce your licensed speed by entering a speed to this write-only object and take note of the generated key in hzIduDowngradeLicensedSpeedKey.
Format: [speed]
Example: 200rw INTEGER .1.3.6.1.4.1.7262.2.3.1.3.1 |
hzIduLicensedSpeedCountUsedForKeyThis object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.ro INTEGER .1.3.6.1.4.1.7262.2.3.1.3.2 |
hzIduLicensedSpeedDowngradeKeyThis read-only object will show a 'key' after successfully downgrading the license speed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.3.3 |
hzIduSysUpgradeWirelessPorts OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.4 |
hzIduLicensedWirelessPortsUpgradeKeyHardware upgrade license key. Upgrade the number of active wireless ports by setting a valid license key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.4.1 |
hzIduLicensedWirelessPortsChangesThis object indicates the number of times the wireless port count has been changed successfully. It is used when generating new license keys for your system. Currently, there is no SNMP object for downgrading the number of wireless ports.ro Counter .1.3.6.1.4.1.7262.2.3.1.4.2 |
hzIduSysSpeed OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.5 |
hzIduSystemCurrentSpeedChanges the working speed of the horizon. Writes are only valid if system is a FLEX. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps.rw INTEGER ( 0..1000 ) .1.3.6.1.4.1.7262.2.3.1.5.1 |
hzIduSystemLicensedSpeedIndicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps.ro INTEGER ( 0..1000 ) .1.3.6.1.4.1.7262.2.3.1.5.2 |
hzIduSystemModeIndicates the specific type of system this is.rw Enumeration .1.3.6.1.4.1.7262.2.3.1.5.3 |
hzIduInventory OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.6 |
hzIduHwInventory OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.6.1 |
hzIduFrequencyFilePartNumberA textual string containing Part Number of the Frequency Filero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.1 |
hzIduUnitSerialNoA textual string containing Serial Number of the Unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.2 |
hzIduUnitAssemblylNoA textual string containing the Assembly Number of the Unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.3 |
hzIduIfSerialNo1A textual string containing Serial no of IF 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.4 |
hzIduIfSerialNo2A textual string containing Serial no of IF 2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.5 |
hzIduIfAssemblylNo1A textual string containing assembly no of IF 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.6 |
hzIduIfAssemblylNo2A textual string containing assembly no of IF 2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.7 |
hzIduNccSerialNoA textual string containing Serial no of the NCC.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.10 |
hzIduNccAssemblylNoA textual string containing assembly no of the NCC.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.11 |
hzIduRadio1SerialNoA textual string containing the serial number of radio 1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.12 |
hzIduRadio2SerialNoA textual string containing the serial number of radio 2 if configuredro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.13 |
hzIduRadio1HardwareIdA textual string containing the hardware id of radio 1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.14 |
hzIduRadio2HardwareIdA textual string containing the hardware id of radio 2 if configuredro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.1.15 |
hzIduInternalIFCouplerPresentThis attribute indicates if there is an internal IF Coupler card present.ro Enumeration .1.3.6.1.4.1.7262.2.3.1.6.1.16 |
hzIduHwWirelessPortsLicensedThe number of licensed wireless ports. Upgrade this to 2 ports by setting the hardware upgrade license key.ro INTEGER ( 1..2 ) .1.3.6.1.4.1.7262.2.3.1.6.1.17 |
hzIduSwInventory OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.6.2 |
hzIduSwInvSystemOmniVersionNoThe version number of the Omni.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.2.1 |
hzIduSwInvModemOmniVersionNoThe version number of the Modem FPGA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.2.2 |
hzIduSwInvFrequencyFileVersionNoThe version number of the FrequencyFile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.2.3 |
hzIduSwInvMibVersionNoThe version number of the MIB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.2.4 |
hzIduSwInvRadio1FirmwareVersionNoThe version of radio 1 firmware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.2.5 |
hzIduSwInvRadio2FirmwareVersionNoThe version of radio 2 firmware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.6.2.6 |
hzIduAtpc OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.7 |
hzIduAtpcEnableIndicates whether Automatic Transmit Power Control (ATPC) is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.3.1.7.1 |
hzIduAtpcStatusIndicates the actual condition of ATPC:
Enabled if config is on and no issues
Auto-Disabled if ATPC coordinated power condition, AAM triggered, or radio loss of link
Disabled-manual if config set to offro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.7.2 |
hzIduAtpcCoordinatedPowerThe Coordinated Power can be enabled by specifying the coordinated power status and coordinated power offset in a string with the following format (without the single quotes):
'<on [offset] | off>'
The offset can optionally be specified after the 'on' string and after a single space and can be be between 0.0 and 10.0 inclusive. The 'offset' is represented in dBm and indicates the offset below TxPower. The accuracy is limited to tenths of dBm so an offset of 9.99 is recognized as 9.9 dBm.
Examples: 'on 5.5' or 'off'rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.7.3 |
hzIduAam OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.8 |
hzIduAamStatusRead or set the Automatic Adaptive Modulation (AAM) as 'on' or 'off'.rw Enumeration .1.3.6.1.4.1.7262.2.3.1.8.1 |
hzIduAamDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.8.2 |
hzIduAamDiagnoseThis write-only object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively. Poll the hzIduAamDiagnosticResult object to determine the results.rw Enumeration .1.3.6.1.4.1.7262.2.3.1.8.2.1 |
hzIduAamDiagnosticResultThe result from AAM Diagnostic is read from this object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.8.2.2 |
hzIduPeerSysInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.1.9 |
hzIduPeerMacAddressThe MAC Address of the peer network interface card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.1.9.1 |
hzIduPeerIpAddressThe IP Address of the peer network interface card.ro IpAddress .1.3.6.1.4.1.7262.2.3.1.9.2 |
hzIduPeerSubnetMaskThe subnet mask for the peer network interface card.ro IpAddress .1.3.6.1.4.1.7262.2.3.1.9.3 |
hzIduAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.2 |
hzIduUniquePeerAuthenticationKeyThe serial number of the peer node that this node will communicate with.
This is only used when authentication mode is set to unique.rw DisplayString ( SIZE ( 0 .. 34 ) ) .1.3.6.1.4.1.7262.2.3.2.1 |
hzIduPeerDetectedSerialNumberThe serial number of the peer node that the system is presently communicating
with. This is only used when authentication is set to unique.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.2.2 |
hzIduAuthenticationModeThis sets the authentication mode for the system.If configured for unique
authentication, an horizon node only exchanges user traffic with one other
horizon node. The serial number is used in this case.
If configured for group authentication, an horizon node exchanges user
traffic with another horizon node of the same group and uses the
authentication keys.rw Enumeration .1.3.6.1.4.1.7262.2.3.2.3 |
hzIduAuthenticationFailureActionThis sets the authentication failure action for the system.
Block traffic will block all user traffic including remote
management access. Pass traffic will allow all user traffic
to be sent and recievedrw Enumeration .1.3.6.1.4.1.7262.2.3.2.4 |
hzIduPeerAuthenticationStatusSpecifies the current authentication status of the system.
Authenticated means authentication is on and the system
has been authenticated, notAuthenticated means authentication
is off or the system has not communicated yet with the other node,
explicit authentication failure means authentication is on and
authentication has failedro Enumeration .1.3.6.1.4.1.7262.2.3.2.5 |
hzIduNetworkManagement OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.3 |
hzIduMacAddressThe MAC Address of the network interface card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.3.1 |
hzIduNetworkManagementInterfaceDescribes the network management interface connection options.ro Enumeration .1.3.6.1.4.1.7262.2.3.3.2 |
hzIduIpAddressThe IP Address of the network interface card.ro IpAddress .1.3.6.1.4.1.7262.2.3.3.3 |
hzIduSubnetMaskThe subnet mask for the network interface card.ro IpAddress .1.3.6.1.4.1.7262.2.3.3.4 |
hzIduDefaultGatewayThe default gateway for the network interface cardro IpAddress .1.3.6.1.4.1.7262.2.3.3.5 |
hzIduTelnetAccessModeIndicates whether Telnet access is allowed.rw Enumeration .1.3.6.1.4.1.7262.2.3.3.6 |
hzIduSshAccessModeIndicates whether ssh access is allowed.rw Enumeration .1.3.6.1.4.1.7262.2.3.3.7 |
hzIduVlanTagEnableIndicates whether VLAN tagging is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.3.3.8 |
hzIduVlanTagIdrw INTEGER .1.3.6.1.4.1.7262.2.3.3.9 |
hzIduVlanTagPriorityrw INTEGER .1.3.6.1.4.1.7262.2.3.3.10 |
hzIduNetworkInterface OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.4 |
hzIduEnetPort1 OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.4.1 |
hzIduEnetPort1DescriptionDescribes the functionality of the port1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.4.1.1 |
hzIduEnetPort1Config OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.4.1.2 |
hzIduEnetPort1AutoNegotiationTurns auto-negotiation on or off for Ethernet Port1. Turning off results in the interface defaulting to 100BaseT, Full Duplex.rw Enumeration .1.3.6.1.4.1.7262.2.3.4.1.2.1 |
hzIduEnetPort1SpeedConfigure the port1 interface speed .rw Enumeration .1.3.6.1.4.1.7262.2.3.4.1.2.2 |
hzIduEnetPort1DuplexConfigure the port1 interface duplex.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.1.2.3 |
hzIduEnetPort1MediaConfigure the port1 interface media.rw Enumeration .1.3.6.1.4.1.7262.2.3.4.1.2.4 |
hzIduEnetPort1AdminStateConfigure the port1 interface media.rw Enumeration .1.3.6.1.4.1.7262.2.3.4.1.2.5 |
hzIduEnetPort1OpticalTransceiverStateWhen it is on, optical transmitter for port1 is enabled. Otherwise optical transmitter is disabled.rw Enumeration .1.3.6.1.4.1.7262.2.3.4.1.2.6 |
hzIduEnetPort1PauseFrameEnableWhen PAUSE is enabled, port1 pause frames can be generated by the
system and the pause frames will flow toward the link partner
on the network. When PAUSE is not enabled,
no pause frames will be generated by the system.rw Enumeration .1.3.6.1.4.1.7262.2.3.4.1.2.7 |
hzIduEnetPort1MaxFrameSizeFor port1 the default maximum frame size is 1600 bytes. The settable
maximum frame size must be a multiple of 128. If the chosen
maximum frame size is not a multiple of 128, its closest
number which is a multiple of 128 is actually used. The
settable lowest maximum frame size is 1664, and the settable
highest maximum frame size is 9600. If the chosen maximum
frame size is out of this range, the default maximum frame
size of 1600 is used.rw INTEGER ( 1600..9600 ) .1.3.6.1.4.1.7262.2.3.4.1.2.8 |
hzIduEnetPort1DroppedEnetFramesThresholdParametersA read-write string: The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.rw DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.4.1.2.9 |
hzIduEnetPort1BandwidthUtilizationThresholdParametersA read-write string: The percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the threshold point in percent, the number of seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.rw DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.4.1.2.10 |
hzIduEnetPort1Status OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.4.1.3 |
hzIduEnetPort1LinkStatusIndicates the port1 link status.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.1.3.1 |
hzIduEnetPort1AutoNegotiationStatusIndicates the port1 AutoNegotiation status.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.1.3.2 |
hzIduEnetPort1SpeedStatusIndicates the port1 interface speed status.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.1.3.3 |
hzIduEnetPort1DuplexStatusIndicates the port1 interface duplex status.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.1.3.4 |
hzIduEnetPort1MediaStatusIndicates the port1 interface media status.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.1.3.5 |
hzIduEnetPort1Stats OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.4.1.4 |
hzIduEnetPort1TxFramesThe current count of port1 frames sent.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.1 |
hzIduEnetPort1TxBytesThe current count of port1 bytes sent.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.2 |
hzIduEnetPort1RxFramesThe current count of port1 frames received.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.3 |
hzIduEnetPort1RxBytesThe current count of port1 bytes received.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.4 |
hzIduEnetPort1RxFramesInErrorsThe current count of port1 frames received in error.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.5 |
hzIduEnetPort1RxFramesCRCErrorsThe current count of CRC error frames received for port1.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.6 |
hzIduEnetPort1BWUtilizationThe carried load over link capacity for port1.ro INTEGER .1.3.6.1.4.1.7262.2.3.4.1.4.7 |
hzIduEnetPort1IngressDataRateThe data rate coming into the ethernet for port1.
The data rate you see is multiplied by 100. e.g. A display
of 1530 is actually 15.30 Mpbsro INTEGER .1.3.6.1.4.1.7262.2.3.4.1.4.8 |
hzIduEnetPort1EgressDataRateThe data rate going out of the ethernet for port1.
The data rate you see is multiplied by 100. e.g. A display
of 1530 is actually 15.30 Mpbs.ro INTEGER .1.3.6.1.4.1.7262.2.3.4.1.4.9 |
hzIduEnetPort1FramesInQueue1sThe current count of port1 frames passed through queue 1.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.10 |
hzIduEnetPort1FramesInQueue2sThe current count of port1 frames passed through queue 2.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.11 |
hzIduEnetPort1FramesInQueue3sThe current count of NIC frames passed through queue 3.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.12 |
hzIduEnetPort1FramesInQueue4sThe current count of NIC frames passed through queue 4.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.13 |
hzIduEnetPort1FramesInQueue1DiscardedsThe current count of NIC frames received in queue 2 that
were discarded, but due to an error. One possible reason
is lack of buffer space.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.14 |
hzIduEnetPort1FramesInQueue2DiscardedsThe current count of port1 frames received in queue 2 that
were discarded, but due to an error. One possible reason
is lack of buffer space.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.15 |
hzIduEnetPort1FramesInQueue3DiscardedsThe current count of port1 frames received in queue 3 that
were discarded, but due to an error. One possible reason
is lack of buffer space.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.16 |
hzIduEnetPort1FramesInQueue4DiscardedsThe current count of port1 frames received in queue 4 that
were discarded, but due to an error. One possible reason
is lack of buffer space.ro Counter .1.3.6.1.4.1.7262.2.3.4.1.4.17 |
hzIduEnetPort2 OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.4.2 |
hzIduEnetPort2DescriptionDescribes the functionality of the port2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.4.2.1 |
hzIduEnetPort2Config OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.4.2.2 |
hzIduEnetPort2AutoNegotiationTurns auto-negotiation on or off for Ethernet Port2. Turning off results in the interface defaulting to 100BaseT, Full Duplex.rw Enumeration .1.3.6.1.4.1.7262.2.3.4.2.2.1 |
hzIduEnetPort2SpeedConfigure the port1 interface speed .rw Enumeration .1.3.6.1.4.1.7262.2.3.4.2.2.2 |
hzIduEnetPort2DuplexConfigure the port1 interface duplex.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.2.2.3 |
hzIduEnetPort2AdminStateConfigure the port2 shutdown media.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.2.2.4 |
hzIduEnetPort2Status OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.4.2.3 |
hzIduEnetPort2LinkStatusIndicates the Port2 link status.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.2.3.1 |
hzIduEnetPort2AutoNegotiationStatusIndicates the Port2 AutoNegotiation status.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.2.3.2 |
hzIduEnetPort2SpeedStatusIndicates the Port2 interface speed status.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.2.3.3 |
hzIduEnetPort2DuplexStatusIndicates the Port2 interface duplex status.ro Enumeration .1.3.6.1.4.1.7262.2.3.4.2.3.4 |
hzIduEnetPort2Stats OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.4.2.4 |
hzIduEnetPort2TxFramesThe current count of Port2 frames sent.ro Counter .1.3.6.1.4.1.7262.2.3.4.2.4.1 |
hzIduEnetPort2TxBytesThe current count of Port2 bytes sent.ro Counter .1.3.6.1.4.1.7262.2.3.4.2.4.2 |
hzIduEnetPort2RxFramesThe current count of Port2 frames received.ro Counter .1.3.6.1.4.1.7262.2.3.4.2.4.3 |
hzIduEnetPort2RxBytesThe current count of Port2 bytes received.ro Counter .1.3.6.1.4.1.7262.2.3.4.2.4.4 |
hzIduEnetPort2RxFramesInErrorsThe current count of Port2 frames received in error.ro Counter .1.3.6.1.4.1.7262.2.3.4.2.4.5 |
hzIduEnetPort2RxFramesCrcErrorsThe current count of CRC error frames received for Port2.ro Counter .1.3.6.1.4.1.7262.2.3.4.2.4.6 |
hzIduWirelessInterface OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5 |
hzIduWirelessInterfaceNames OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.1 |
hzIduWirelessInterfaceNameTableA table of Wireless Interface Modems SEQUENCE OF HzIduWirelessInterfaceNameEntry .1.3.6.1.4.1.7262.2.3.5.1.1 |
hzIduWirelessInterfaceNameEntryA Wireless Interface Modem HzIduWirelessInterfaceNameEntry .1.3.6.1.4.1.7262.2.3.5.1.1.1 |
hzIduWirelessInterfaceNameIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.1.1.1.1 |
hzIduWirelessInterfaceNameDescribes the functionality of the Wireless Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.1.1.1.2 |
hzIduWirelessInterfaceModems OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.2 |
hzIduAggregatedWirelessPortStats OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.2.1 |
hzIduAggregatedWirelessPortTxFramesThe current count of Ethernet Combiner frames sent.ro Counter .1.3.6.1.4.1.7262.2.3.5.2.1.1 |
hzIduAggregatedWirelessPortRxFramesOKsThe current count of good Ethernet Combiner frames received.ro Counter .1.3.6.1.4.1.7262.2.3.5.2.1.2 |
hzIduAggregatedWirelessPortRxFrameErrorsThe current count of Ethernet Combiner frames received in error.ro Counter .1.3.6.1.4.1.7262.2.3.5.2.1.3 |
hzIduAggregatedWirelessPortRxFramesQueueDiscardsThe current count of Ethernet Combiner frames in the queue that were discarded.ro Counter .1.3.6.1.4.1.7262.2.3.5.2.1.4 |
hzIduModemTableA table of Wireless Interface Modems SEQUENCE OF HzIduModemEntry .1.3.6.1.4.1.7262.2.3.5.2.2 |
hzIduModemEntryA Wireless Interface Modem HzIduModemEntry .1.3.6.1.4.1.7262.2.3.5.2.2.1 |
hzIduModemIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.2.2.1.1 |
hzIduModemOperStatusThe current operational state of the interface. Testing indicates that no operational packets can be passed.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.2.2.1.2 |
hzIduModemResetWriting 1 to this object causes the modem card to be reset.
All other values are not recognized. This variable always
reads back as 0. mdmOperStatus should be polled by the
user after this object is written to, to verify that the
modem card has been reset. Not applicable in this releaserw INTEGER ( 0 .. 1 ) .1.3.6.1.4.1.7262.2.3.5.2.2.1.3 |
hzIduModemChannelizedRSLAn estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example 352 is actually -35.2dBmro INTEGER .1.3.6.1.4.1.7262.2.3.5.2.2.1.4 |
hzIduModemChannelizedRSLUnsignedIntThe absolute value of the estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually -35.2dBmro INTEGER .1.3.6.1.4.1.7262.2.3.5.2.2.1.5 |
hzIduModemModulationTypeThe modulation type of the modem, distinguished according
to the physical/link protocol.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.2.2.1.6 |
hzIduModemRxSpeedAn estimate of the modem's current Rx bandwidth in bits per
second. Divide the value by 10000 to get the actual data rate in Mbpsro INTEGER .1.3.6.1.4.1.7262.2.3.5.2.2.1.7 |
hzIduModemTxSpeedAn estimate of the modem's current Tx bandwidth in bits per
second. Divide the value by 10000 to get the actual data rate in Mbpsro INTEGER .1.3.6.1.4.1.7262.2.3.5.2.2.1.8 |
hzIduModemSNRSNR value in dB. Divide the value by 10 to get the actual SNR.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.2.2.1.9 |
hzIduModemEbToNoiseRatioThe ratio of the modem Estimated Energy per information bit to Noise power spectral density.
Divide the value by 10 to get the actual EbToNoiseRatioro INTEGER .1.3.6.1.4.1.7262.2.3.5.2.2.1.10 |
hzIduModemEqualizerStressIndicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.2.2.1.11 |
hzIduModemSNRThresholdParametersA read-write stringrw DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.5.2.2.1.12 |
hzIduModemChannelizedRslBelowThresholdParametersA read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dBm, the second is the time in seconds that the threshold must be exceeded. In this example the threshold -75 dBm and the time is set to 10 seconds. The single quote marks i.e. ' ' are not used in the command.rw DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.5.2.2.1.13 |
hzIduModemStatsTableA table of Wireless Interface Modem Statistics SEQUENCE OF HzIduModemStatsEntry .1.3.6.1.4.1.7262.2.3.5.2.3 |
hzIduModemStatsEntryStatistics for a Wireless Interface Modem HzIduModemStatsEntry .1.3.6.1.4.1.7262.2.3.5.2.3.1 |
hzIduModemStatsIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.2.3.1.1 |
hzIduModemTxBlocksThe current count of Modem blocks transmitted.ro Counter .1.3.6.1.4.1.7262.2.3.5.2.3.1.2 |
hzIduModemRxBlocksOKsThe current count of Modem blocks received.ro Counter .1.3.6.1.4.1.7262.2.3.5.2.3.1.3 |
hzIduModemRxBlocksErrorsThe current count of Modem blocks received in error.ro Counter .1.3.6.1.4.1.7262.2.3.5.2.3.1.4 |
hzIduWirelessInterfaceIFCards OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.3 |
hzIduIntermediateFrequencyCardTableA table of Wireless Interface Modems SEQUENCE OF HzIduIntermediateFrequencyCardEntry .1.3.6.1.4.1.7262.2.3.5.3.1 |
hzIduIntermediateFrequencyCardEntryA Wireless Interface Modem HzIduIntermediateFrequencyCardEntry .1.3.6.1.4.1.7262.2.3.5.3.1.1 |
hzIduIFCardIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.3.1.1.1 |
hzIduIFCardTxSynthesizerLockIndicates if the transmit synthesizer is locked.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.3.1.1.2 |
hzIduIFCardRxSynthesizerLockIndicates if the receive synthesizer is locked.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.3.1.1.3 |
hzIduWirelessInterfaceRadios OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.4 |
hzIduRadioTableA table of Wireless Interface Radios SEQUENCE OF HzIduRadioEntry .1.3.6.1.4.1.7262.2.3.5.4.1 |
hzIduRadioEntryA Wireless Interface Radio HzIduRadioEntry .1.3.6.1.4.1.7262.2.3.5.4.1.1 |
hzIduRadioIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.4.1.1.1 |
hzIduRadioDescriptionA textual string containing information about the radio. Includes the
manufacturer, product name, software version, serial number, and hardware
version of the radio.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.4.1.1.2 |
hzIduRadioOperStatusThe current operational state of the interface. Testing
indicates that no operational packets can be passed. Testing
also indicates that a firmware upgrade may be in progressro Enumeration .1.3.6.1.4.1.7262.2.3.5.4.1.1.3 |
hzIduRadioLastChangedThe value of sysUpTime at the time the radio entered its current
operational state. If the current state was entered prior to the
last re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7262.2.3.5.4.1.1.4 |
hzIduRadioReceiveSignalLevelThe Received Signal Level indicates the power of the receive level
in dBm. The number is divided by 10 to get the actual dBm. For example,
-432 is actually -43.2dBm.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.4.1.1.5 |
hzIduRadioReceiveSignalLevelUnsignedThe Received Signal Level indicates the power of the receive level in dBm.
The number is divided by -10. e.g. 432 is actually -43.2dBm. Object provided
to accomodate plotting of negative RSL values which is not supported
in some EMS (i.e.: CastleRock). Please use 'hzIduRadioReceiveSignalLevel'
object if your EMS supports plotting of negative integers.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.4.1.1.6 |
hzIduRadioTxGainThe gain of the radio in the transmit chain. Indicates the gain in dB.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.4.1.1.7 |
hzIduRadioRxGainThe gain of the radio in the receive chain. Indicates the gain in dB.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.4.1.1.8 |
hzIduRadioResetWriting 1 to this object causes the radio to be reset. All other values
are not recognized. This variable always reads back as 0. radioOperStatus
should be polled by the user after this object is written to, to verify
that the radio card has been reset.rw INTEGER .1.3.6.1.4.1.7262.2.3.5.4.1.1.9 |
hzIduRadioTransmitPowerdBmThis defines the transmit level of the radio. If ATPC or AAM is enabled, you can't change the transmit power.
The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm.
If the radio is operational and not muted, it is the current transmitting power.
If the radio is operational and muted, it is the programmed transmitting power, and will transmit at this level when the radio is un-muted.
If the radio is not operational it is the programmed transmitting power, and will transmit at this level when the radio is operational and not muted.
If the radio does not have transmit calibration tables programmed into its EEPROM, this transmit power level cannot be used as it is not possible to accurately calculate the actual transmit level. In this case this object will return -99.rw INTEGER .1.3.6.1.4.1.7262.2.3.5.4.1.1.10 |
hzIduRadioPowerOptionThis indicates the power option of the radio: normal or high power.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.4.1.1.11 |
hzIduRadioTxStateThis indicates the power option of the radio: normal or high power.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.4.1.1.12 |
hzIduRadioTemperatureThe Radio temperature in degree Celsius. The actual temperature is determined by dividing the number by 10. e.g. 202 is actually 20.2 degrees Celsius.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.4.1.1.13 |
hzIduRadioRxCableLossThe Rx Cable Loss in dB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.4.1.1.14 |
hzIduRadioTxCableLossThe Tx Cable Loss in dB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.4.1.1.15 |
hzIduRadioTxCableLossChangeThe Tx Cable Loss Change is the difference between the configured TxPower and the measured TxPower measured in dB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.4.1.1.16 |
hzIduWirelessInterfaceRadioFrequencies OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.5 |
hzIduWirelessInterfaceRadio1Frequencies OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.5.1 |
hzIduRadio1BandThe radio frequency standard used for Radio 1. Frequency bands are divided into sub bands.
i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and
fcc23d which make up the entire FCC23 bandrw Enumeration .1.3.6.1.4.1.7262.2.3.5.5.1.1 |
hzIduRadio1FreqGroupSelectedThe frequency group selected for Radio 1.
The frequency subbands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHighrw Enumeration .1.3.6.1.4.1.7262.2.3.5.5.1.2 |
hzIduRadio1TxHighFreqTableA table of txHigh frequency settings for Radio 1 SEQUENCE OF HzIduRadio1TxHighFreqEntry .1.3.6.1.4.1.7262.2.3.5.5.1.3 |
hzIduRadio1TxHighFreqEntryA txHighFrequency entry containing all the frequency values HzIduRadio1TxHighFreqEntry .1.3.6.1.4.1.7262.2.3.5.5.1.3.1 |
hzIduRadio1TxHighFreqIndexA unique value for each frequency channel.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.1.3.1.1 |
hzIduRadio1TxHighFreqChannelIndexThe channel index for the frequency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.5.1.3.1.2 |
hzIduRadio1TxHighFreqTransmitRfFrequencyThe RF TX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.1.3.1.3 |
hzIduRadio1TxHighFreqReceiveRfFrequencyThe RF RX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.1.3.1.4 |
hzIduRadio1TxHighFreqProgrammedSpecifies the operating frequency channel for the modem.
***Only 1 index may be selected in a 1 modem system.rw Enumeration .1.3.6.1.4.1.7262.2.3.5.5.1.3.1.5 |
hzIduRadio1TxLowFreqTableA table of txLow frequency settings for Radio 1 SEQUENCE OF HzIduRadio1TxLowFreqEntry .1.3.6.1.4.1.7262.2.3.5.5.1.4 |
hzIduRadio1TxLowFreqEntryA hzIduTxLowFrequeny entry containing the frequency values for a specific index HzIduRadio1TxLowFreqEntry .1.3.6.1.4.1.7262.2.3.5.5.1.4.1 |
hzIduRadio1TxLowFreqIndexA unique value for each frequency channel.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.1.4.1.1 |
hzIduRadio1TxLowFreqChannelIndexThe channel index for the frequency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.5.1.4.1.2 |
hzIduRadio1TxLowFreqTransmitRfFrequencyThe RF TX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.1.4.1.3 |
hzIduRadio1TxLowFreqReceiveRfFrequencyThe RF RX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.1.4.1.4 |
hzIduRadio1TxLowFreqProgrammedSpecifies the operating frequency channel for the modem.
***Only 1 index may be selected in a 1 modem system.rw Enumeration .1.3.6.1.4.1.7262.2.3.5.5.1.4.1.5 |
hzIduRadio1ProgrammedFrequency OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.5.1.5 |
hzIduRadio1ProgrammedFrequencyChannelThe channel that has been programmed for Radio 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.5.1.5.1 |
hzIduRadio1ProgrammedFrequencyTxRfThe programmed RF TX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.1.5.2 |
hzIduRadio1ProgrammedFrequencyRxRfThe RF RX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.1.5.3 |
hzIduWirelessInterfaceRadio2Frequencies OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.5.2 |
hzIduRadio2BandThe radio frequency standard used by Radio 2 (if present). Frequency bands are divided into sub bands.
i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc23d which make up the entire FCC23 bandrw Enumeration .1.3.6.1.4.1.7262.2.3.5.5.2.1 |
hzIduRadio2FreqGroupSelectedThe frequency group selected for Radio 2.
The frequency subbands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHighrw Enumeration .1.3.6.1.4.1.7262.2.3.5.5.2.2 |
hzIduRadio2TxHighFreqTableA table of txHigh frequency settings for Radio 2 SEQUENCE OF HzIduRadio2TxHighFreqEntry .1.3.6.1.4.1.7262.2.3.5.5.2.3 |
hzIduRadio2TxHighFreqEntryA txHighFrequency entry containing all the frequency values HzIduRadio2TxHighFreqEntry .1.3.6.1.4.1.7262.2.3.5.5.2.3.1 |
hzIduRadio2TxHighFreqIndexA unique value for each frequency channel.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.2.3.1.1 |
hzIduRadio2TxHighFreqChannelIndexThe channel index for the frequency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.5.2.3.1.2 |
hzIduRadio2TxHighFreqTransmitRfFrequencyThe RF TX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.2.3.1.3 |
hzIduRadio2TxHighFreqReceiveRfFrequencyThe RF RX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.2.3.1.4 |
hzIduRadio2TxHighFreqProgrammedSpecifies the operating frequency channel for the modem.
***Only 1 index may be selected in a 1 modem system.rw Enumeration .1.3.6.1.4.1.7262.2.3.5.5.2.3.1.5 |
hzIduRadio2TxLowFreqTableA table of txLow frequency settings for Radio 2 SEQUENCE OF HzIduRadio2TxLowFreqEntry .1.3.6.1.4.1.7262.2.3.5.5.2.4 |
hzIduRadio2TxLowFreqEntryA hzIduTxLowFrequeny entry containing the frequency values for a specific index HzIduRadio2TxLowFreqEntry .1.3.6.1.4.1.7262.2.3.5.5.2.4.1 |
hzIduRadio2TxLowFreqIndexA unique value for each frequency channel.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.2.4.1.1 |
hzIduRadio2TxLowFreqChannelIndexThe channel index for the frequency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.5.2.4.1.2 |
hzIduRadio2TxLowFreqTransmitRfFrequencyThe RF TX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.2.4.1.3 |
hzIduRadio2TxLowFreqReceiveRfFrequencyThe RF RX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.2.4.1.4 |
hzIduRadio2TxLowFreqProgrammedSpecifies the operating frequency channel for the modem.
***Only 1 index may be selected in a 1 modem system.rw Enumeration .1.3.6.1.4.1.7262.2.3.5.5.2.4.1.5 |
hzIduRadio2ProgrammedFrequency OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.5.2.5 |
hzIduRadio2ProgrammedFrequencyChannelThe channel that has been programmed for Radio 2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.5.2.5.1 |
hzIduRadio2ProgrammedFrequencyTxRfThe programmed RF TX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.2.5.2 |
hzIduRadio2ProgrammedFrequencyRxRfThe RF RX frequency in KHz.ro INTEGER .1.3.6.1.4.1.7262.2.3.5.5.2.5.3 |
hzIduWirelessInterfaceAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.6 |
hzIduAntennaDiameterThis defines the diameter of the antenna represented in inches.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.6.1 |
hzIduWirelessInterfaceRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.7 |
hzIduWirelessInterfaceRedundancyActiveWirelessPortThis attribute indicates the active wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy.ro Enumeration .1.3.6.1.4.1.7262.2.3.5.7.1 |
hzIduWirelessInterfaceRedundancyPrimaryWirelessPortThis attribute indicates the primary wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy. The primary wireless port indicates which wireless port is connected to the 'primary' port on the RDRM coupler.rw Enumeration .1.3.6.1.4.1.7262.2.3.5.7.2 |
hzIduWirelessInterfaceRedundancySwitchingAlgorithmThis attribute selects the rule that will determine when a redundant path switch will take place. There are two options: manual and algorithm-based. The 'Manual' option turns off the automatic path switching feature. Only an operator can switch the active path.rw Enumeration .1.3.6.1.4.1.7262.2.3.5.7.3 |
hzIduWirelessInterfaceRedundancySwitchCauseThis string indicates the reason that a redundancy switch has occurred. If the active port is the primary port then this string is empty.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.7.4 |
hzIduWirelessInterfaceRedundancySwitchRadioThis object switches the active path when switch (1) is written to this variable.rw Enumeration .1.3.6.1.4.1.7262.2.3.5.7.5 |
hzIduWirelessInterfaceRedundancyRemoveFaultyWirelessPortThis object removes the specified port from the faulty port list.rw Enumeration .1.3.6.1.4.1.7262.2.3.5.7.6 |
hzIduWirelessInterfaceRedundancyDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.5.7.7 |
hzIduWirelessInterfaceRedundancyDiagnoseThis write-only object will diagnose problems with switching paths. Write diagnose (1) to this object and check results in hzIduWirelessInterfaceRedundancyDiagnosticResult objectrw Enumeration .1.3.6.1.4.1.7262.2.3.5.7.7.1 |
hzIduWirelessInterfaceRedundancyDiagnosticResultThe result from Redundancy Diagnostic is read from this object. Note that the diagnostic result presented in this object is private to SNMP initiated diagnostics. If a diagnostic is initiated from the CLI or WEB, this result will remain unchanged.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.5.7.7.2 |
hzIduCalendar OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.6 |
hzIduDateA string in the format as follows:
XX/YY/ZZ
Where XX = day of month (range 01 to 31)
YY = month of year(range 01 to 12)
ZZ = year (range 01 - 99)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.6.1 |
hzIduTimeA string in the format as follows:
aa:bb:cc.ddd
Where aa = hour of day ( range 00 to 23 )
bb = minute of hour ( range 00 to 59 )
cc = second of minute( range 00 to 59 )
ddd = thousandths of second (range 000 to 999)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.6.2 |
hzIduAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.7 |
hzIduClearAlarmCountersClears the alarm counters for the specified grouprw Enumeration .1.3.6.1.4.1.7262.2.3.7.1 |
hzIduSystemAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.7.2 |
hzIduExplicitAuthenticationFailureAuthentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.1 |
hzIduExplicitAuthenticationFailureCountsIndicates the number of times explicit authentication has failed.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.2 |
hzIduAamConfigMismatchIn the near end Automatic Adaptive Modulation(AAM) feature set to on and in peer it is set to offro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.3 |
hzIduAamConfigMismatchCountsIndicates the approximate number of seconds AAMConfigMismatch alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.4 |
hzIduAamActiveIndicates aam is active and system running on lowest modulationro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.5 |
hzIduAamActiveCountsIndicates the approximate number of seconds AAMActive alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.6 |
hzIduSntpServerUnavailableAlarmAll of the SNTP servers are not available.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.7 |
hzIduSntpServerUnavailableAlarmCountsIndicates how long in seconds all of the SNTP servers are not available.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.8 |
hzIduFrequencyFileInvalidExecuting frequency file is invalid.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.9 |
hzIduFrequencyFileInvalidCountsIndicates the time (in secs) since this alarm exist.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.10 |
hzIduFan1FailureIndicates that Fan 1 has failed.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.11 |
hzIduFan1FailureCountsIndicates the number of seconds that the fan has failed for.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.12 |
hzIduFan2FailureIndicates that Fan 2 has failed.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.13 |
hzIduFan2FailureCountsIndicates the number of seconds that the fan has failed for.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.14 |
hzIduFan3FailureIndicates that Fan 3 has failed.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.15 |
hzIduFan3FailureCountsIndicates the number of seconds that the fan has failed for.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.16 |
hzIduFan4FailureIndicates that Fan 4 has failed.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.17 |
hzIduFan4FailureCountsIndicates the number of seconds that the fan has failed for.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.18 |
hzIduPrimaryPortNotSetThe primary port used for redundancy has not been set.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.19 |
hzIduPrimaryPortNotSetCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.20 |
hzIduSecondaryPortActiveThe active wireless port has switched to the secondary wireless port.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.21 |
hzIduSecondaryPortActiveCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.22 |
hzIduPrimaryPortFaultyThe primary wireless port is faulty.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.23 |
hzIduPrimaryPortFaultyCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.24 |
hzIduSecondaryPortFaultyThe secondary wireless port is faulty.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.2.25 |
hzIduSecondaryPortFaultyCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.2.26 |
hzIduNetworkInterfaceAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.7.3 |
hzIduEnetPort1Alarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.7.3.1 |
hzIduEnetPort1DroppedEnetFramesThresholdExceededThe threshold for number of frames dropped has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.3.1.1 |
hzIduEnetPort1DroppedEnetFramesThresholdCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter .1.3.6.1.4.1.7262.2.3.7.3.1.2 |
hzIduEnetPort1BandwidthUtilizationThresholdExceededThe threshold for the percentage of available bandwidth has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.3.1.3 |
hzIduEnetPort1BandwidthUtilizationThresholdCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter .1.3.6.1.4.1.7262.2.3.7.3.1.4 |
hzIduEnetPort1RlsMismatchRLS configurations on the pair of systems are mismatched.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.3.1.5 |
hzIduEnetPort1RlsMismatchCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter .1.3.6.1.4.1.7262.2.3.7.3.1.6 |
hzIduRLSQueueBasedShutdownActivatedRLS Queue-Based shutdown is activated.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.3.1.7 |
hzIduRLSQueueBasedShutdownActivatedCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter .1.3.6.1.4.1.7262.2.3.7.3.1.8 |
hzIduEnetPort1EthernetLinkDownIndicates whether the Ethernet link is down or not. The severity is major, the probable cause is an incorrect configuration of the switch or router connected to horizon. The recommended course of action is to check the connection.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.3.1.9 |
hzIduEnetPort1EthernetLinkDownActivatedCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter .1.3.6.1.4.1.7262.2.3.7.3.1.10 |
hzIduEnetPort2Alarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.7.3.2 |
hzIduEnetPort2EthernetLinkDownIndicates whether the Ethernet link is down or not. The severity is major, the probable cause is an incorrect configuration of the switch or router connected to horizon. The recommended course of action is to check the connection.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.3.2.1 |
hzIduEnetPort2EthernetLinkDownActivatedCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter .1.3.6.1.4.1.7262.2.3.7.3.2.2 |
hzIduWirelessInterfaceAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.7.4 |
hzIduModemAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.7.4.1 |
hzIduModemAlarmsTableA table of Modem Alarms. SEQUENCE OF HzIduModemAlarmsEntry .1.3.6.1.4.1.7262.2.3.7.4.1.1 |
hzIduModemAlarmsEntryModem Alarms HzIduModemAlarmsEntry .1.3.6.1.4.1.7262.2.3.7.4.1.1.1 |
hzIduModemAlarmsIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.1 |
hzIduModemRxLossOfSignalLoss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.2 |
hzIduModemRxLossOfSignalCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.3 |
hzIduModemTxLossOfSyncLoss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course of action is to check the line of site between the horizon nodes.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.4 |
hzIduModemTxLossOfSyncCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.5 |
hzIduModemSnrBelowThresholdThe demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the horizon nodes.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.6 |
hzIduModemSnrBelowThresholdCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.7 |
hzIduModemEqualizerStressExceedThresholdEqualizer Stress measured within the demodulator exceeds the threshold value.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.8 |
hzIduModemEquilizerStressExceedThresholdCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.9 |
hzIduModemHardwareFaultro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.10 |
hzIduModemHardwareFaultCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.11 |
hzIduModemProgrammingErrorEncountered some problem while programming the modem.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.12 |
hzIduModemProgrammingErrorCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.13 |
hzIduRLSShutdownActivatedRLS shutdown is activated.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.14 |
hzIduRLSShutdownActivatedCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter .1.3.6.1.4.1.7262.2.3.7.4.1.1.1.15 |
hzIduRadioAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.7.4.2 |
hzIduRadioAlarmsTableA table of Radio Alarms. SEQUENCE OF HzIduRadioAlarmsEntry .1.3.6.1.4.1.7262.2.3.7.4.2.1 |
hzIduRadioAlarmsEntryRadio Alarms HzIduRadioAlarmsEntry .1.3.6.1.4.1.7262.2.3.7.4.2.1.1 |
hzIduRadioAlarmsIndexA unique value for each radio interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.1 |
hzIduRadioPLDROLostLockThe PLDRO/LO has lost lock on the radio. The severity is critical, the probable cause a faulty radio unit and recommended course of action is to replace the radio unit.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.2 |
hzIduRadioPLDROLostLockCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.3 |
hzIduRadioLostCommunicationRS232 communication lost between IDU and the radio. The severity is critical, the probable cause is a faulty cable between the modem and radio, and recommended course of action is to check the connection.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.4 |
hzIduRadioLostCommunicationCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.5 |
hzIduRadioMismatchThe radio connected to the IDU modem does not match the frequency programmed into the modem unit. The severity is major, the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the modem, and recommended course of action is to check the modem frequency settings and radio hardware version number or serial number.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.6 |
hzIduRadioMismatchCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.7 |
hzIduRadioPowerAmpThe power amplifier on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.8 |
hzIduRadioPowerAmpCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.9 |
hzIduRadioExcessiveTxCableLossro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.10 |
hzIduRadioExcessiveTxCableLossCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.11 |
hzIduRadioRslBelowThresholdThe minimum radio receive signal level threshold has been crossed. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the air pair nodes.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.12 |
hzIduRadioRslBelowThresholdCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.13 |
hzIduRadioHighPowerOptionM1This applies to High Power Radios only. Indicates Power Amp Alarm (M1).ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.14 |
hzIduRadioHighPowerOptionM1CountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.15 |
hzIduRadioHighPowerOptionM2This applies to High Power Radios only. Indicates Power Amp Alarm (M2).ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.16 |
hzIduRadioHighPowerOptionM2CountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.17 |
hzIduRadioHighPowerTxDetectorThis applies to High Power Radios only. Indicates minimum power threshold has not been surpassed.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.18 |
hzIduRadioHighPowerTxDetectorCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.19 |
hzIduRadioAtpcConfigMismatchThe pair of the systems don't have same ATPC configurations. On one side ATPC is enabled, but on the other side ATPC is not enabled.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.20 |
hzIduRadioAtpcConfigMismatchCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.21 |
hzIduRadioRedundancySerialNumMismatchThe radio serial number programmed in flash and radio do not match.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.22 |
hzIduRadioRedundancySerialNumMismatchCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.23 |
hzIduRadioExcessiveTxCableLossChangeCable loss change exceeds the threshold.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.24 |
hzIduRadioExcessiveTxCableLossChangeCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.25 |
hzIduRadioExcessiveRxCableLossRx gain can not be adjusted to desired value.ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.26 |
hzIduRadioExcessiveRxCableLossCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.27 |
hzIduRadioAtpcTxAtMaxPowerATPC auto-disabled (transmitting at coordinated power).ro Enumeration .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.28 |
hzIduRadioAtpcTxAtMaxPowerCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter .1.3.6.1.4.1.7262.2.3.7.4.2.1.1.29 |
hzIduTrapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.8 |
hzIduExplicitAuthenticationFailureV1TrapAuthentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.3 |
hzIduExplicitAuthenticationFailureClearedV1TrapThe condition has cleared. The peer node is now authenticated. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.4 |
hzIduAamConfigMisMatchV1TrapAdaptive modulation configuration mismatch TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.5 |
hzIduAamConfigMisMatchClearV1TrapAdaptive modulation configuration mismatch cleared TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.6 |
hzIduAamActiveV1TrapAdaptive modulation on and system running on lowest modulation TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.7 |
hzIduAamActiveClearedV1TrapAdaptive modulation on system running on higher modulation TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.8 |
hzIduAtpcConfigMismatchV1TrapATPC is set to on at near end however in the far end it is set to off. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.9 |
hzIduAtpcConfigMismatchClearedV1TrapATPC configuration mismatch is cleared TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.10 |
hzIduSntpServersUnreachableV1TrapCan't reach any of the sntp servers TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.11 |
hzIduSntpServersUnreachableClearedV1TrapAt least one of SNTP servers is reachable TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.12 |
hzIduFrequencyFileInvalidV1TrapWhen the executing frequency file is invalid,
this trap is generated. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.13 |
hzIduEnetPort1DroppedFramesThresholdExceededV1TrapThe ethernet dropped frames threshold has been detected above its threshold value. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.14 |
hzIduEnetPort1DroppedFramesThresholdExceededClearedV1TrapThe condition has cleared.The ethernet dropped frames threshold is now below its threshold value. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.15 |
hzIduEnetPort1BwUtilizationThresholdExceededV1TrapThe ethernet bandwidth threshold has been detected above its threshold value. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.16 |
hzIduEnetPort1BwUtilizationThresholdExceededClearedV1TrapThe condition has cleared. The ethernet bandwidth threshold is now below its threshold value. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.17 |
hzIduEnetPort1RlsMismatchV1TrapRLS mismatch TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.18 |
hzIduEnetPort1RlsMismatchClearedV1TrapRLS mismatch cleared TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.19 |
hzIduRlsQueueBasedShutdownActivatedv1TrapRLS Queue-Based shutdown is activated TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.20 |
hzIduRlsQueueBasedShutdownActivatedClearedV1TrapRLS Queue-Based shutdown is not activated TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.21 |
hzIduModemRxLossOfSignalLockV1TrapLoss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.22 |
hzIduModemRxLossOfSignalLockClearedV1TrapThe condition has cleared. The demodulator is synchronized. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.23 |
hzIduModemTxLossOfSyncV1TrapLoss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical
interference in the air link, and recommended course of action is to check the line of site between the horizon nodes. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.24 |
hzIduModemTxLossOfSyncClearedV1TrapTx Loss of sync bytes cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.25 |
hzIduModemSnrBelowThresholdV1TrapThe demodulator SNR performance worse than programmed levels. The severity is major, the probable cause
is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course
of action is to check the line of site between the horizon nodes. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.26 |
hzIduModemSnrBelowThresholdClearedV1TrapSNR performance back to normal. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.27 |
hzIduModemEqualizerStressExceedThresholdV1TrapEqualizer Stress measured within the demodulator exceeds the threshold value. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.28 |
hzIduModemEqualizerStressExceedThresholdClearedV1TrapEqualizer Stress measured within the demodulator is within the threshold value. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.29 |
hzIduEnetPort1ChannelizedRslBelowThresholdV1TrapThe RSL has been detected below its minimum threshold. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.30 |
hzIduEnetPort1ChannelizedRslBelowThresholdClearedV1TrapThe condition has cleared. RSL is now above its minimum threshold. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.31 |
hzIduModemHardwareFaultV1TrapPower supply circuitry failed. Should be sent for diagnosis. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.32 |
hzIduModemHardwareFaultClearedV1TrapPower supply circuitry is in good condition. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.33 |
hzIduModemProgrammingErrorV1TrapEncountered problem while programming modem. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.34 |
hzIduModemProgrammingErrorClearedrV1TrapProblem encountered while programming modem is gone. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.35 |
hzIduTtySessionCommencedV1TrapA person has successfully gained access to the ascii management port (telnet, local management port, or HTTP). The username is included in the Trap. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.36 |
hzIduTtySessionTerminatedV1TrapA person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.37 |
hzIduAtpcTxAtMaxPwrV1TrapATPC auto-disabled (transmitting at coordinated power). TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.38 |
hzIduAtpcTxAtMaxPwrClearedV1TrapATPC has been disabled. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.39 |
hzIduRadioPLDROLostLockV1TrapThe PLDRO/LO has lost lock on the radio. The severity is critical, the probable cause a faulty radio unit within AirPair, and recommended course of action is to replace the radio unit TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.40 |
hzIduRadioPLDROLostLockClearedV1TrapThe radio PLDRO/LO lost lock condition has cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.41 |
hzIduRadioLostCommunicationV1TrapRS232 communication lost between IDU and the radio. The severity is critical, the probable cause is a faulty cable between the modem and radio, and recommended course of action is to check the connection. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.42 |
hzIduRadioLostCommunicationClearedV1TrapRS232 communication has been re-establisted between IDU and the radio. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.43 |
hzIduRadioMismatchV1TrapThe radio connected to the IDU modem does not match the frequency programmed into the modem unit. The severity is major, the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the modem, and recommended course of action is to check the modem frequency settings and radio hardware version number or serial number. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.44 |
hzIduRadioMismatchClearedV1TrapThe condition has cleared. The radio matches the programmed parameters in the modem. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.45 |
hzIduRadioPowerAmpV1TrapThe power amplifier on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.46 |
hzIduRadioPowerAmpClearedV1TrapThe power amplifier on the radio is now operating within normal specifications TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.47 |
hzIduRadioExcessiveTxCableLossV1TrapThe radio cannot compensate for the calculated amount of Tx Cable Loss. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.48 |
hzIduRadioExcessiveTxCableLossClearedV1TrapExcessive Tx Cable Loss cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.49 |
hzIduHiPowerRadioDrainM1V1TrapThis applies to High Power Radios only. Indicates Power Amp Alarm (M1). TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.50 |
hzIduHiPowerRadioDrainM1ClearedV1TrapThis applies to High Power Radios only. Indicates Power Amp Alarm (M1) cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.51 |
hzIduHiPowerRadioDrainM2V1TrapThis applies to High Power Radios only. Indicates Power Amp Alarm (M2). TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.52 |
hzIduHiPowerRadioDrainM2ClearedV1TrapThis applies to High Power Radios only. Indicates Power Amp Alarm (M2) cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.53 |
hzIduHiPowerRadioTxDetectorV1TrapThis applies to High Power Radios only. Indicates minimum power threshold has not been surpassed. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.54 |
hzIduHiPowerRadioTxDetectorClearedV1TrapThis applies to High Power Radios only. Indicates minimum power threshold alarm has cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.55 |
hzIduSecondaryRadioIsActiveV1TrapRadio redundancy on, secondary radio is active. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.56 |
hzIduSecondaryRadioIsActiveClearedV1TrapRadio redundancy, secondary radio is no longer active. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.57 |
hzIduRedundancySerialNumberMisMatchV1TrapThe radio serial number programmed in flash and radio do not match. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.58 |
hzIduRedundancySerialNumberMisMatchClearedV1TrapThe radio serial number mismatch has cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.59 |
hzIduRadioFirmwareMismatchV1TrapThe radio connected to the IDU modem does not match the radio band or frequency bank specified by the user. As a result, the system
will not work. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.60 |
hzIduRadioFirmwareMismatchClearedV1TrapRadio Firmnware mismatch cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.61 |
hzIduSecondaryRadioNotdetectedV1TrapSecondary radio not detected. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.62 |
hzIduSecondaryRadioNotdetectedClearedV1Trapsecondary Radio not detected alarm cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.63 |
hzIduPrimaryRadioNotdetectedV1TrapPrimary Radio not detected. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.64 |
hzIduPrimaryRadioNotdetectedClearedV1TrapPrimary Radio not detected alarm cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.65 |
hzIduFaultyPrimaryRadioV1TrapFaulty Primary Radio. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.66 |
hzIduFaultyPrimaryRadioClearedV1TrapFaulty Primary Radio alarm cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.67 |
hzIduRadioExcessiveTxCableLossChangeV1TrapRadio - Excessive Tx cable loss change detected. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.68 |
hzIduRadioExcessiveTxCableLossChangeClearedV1TrapRadio - Excessive Tx cable loss change cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.69 |
hzIduExcessiveRxCableLossV1TrapRadio - Excessive receive cable loss detected. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.70 |
hzIduExcessiveRxCableLossClearedV1TrapRadio - Excessive receive cable loss cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.71 |
hzIduRedundancyPrimaryPortNotSetV1TrapRedundancy: Primary Port not set. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.72 |
hzIduRedundancyPrimaryPortNotSetClearedV1TrapRedundancy: Primary Port not set - cleared. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.73 |
hzIduRedundancySecondaryPortIsActiveV1TrapRedundancy: Secondary Port is Active. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.74 |
hzIduRedundancySecondaryPortIsActiveClearedV1TrapRedundancy: Secondary Port is no longer Active TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.75 |
hzIduRedundancyPrimaryPortFaultyV1TrapRedundancy: Primary Port is Faulty. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.76 |
hzIduRedundancyPrimaryPortFaultyClearedV1TrapRedundancy: Primary Port is no longer Faulty. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.77 |
hzIduRedundancySecondaryPortFaultyV1TrapRedundancy: Secondary Port is Faulty. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.78 |
hzIduRedundancySecondaryPortFaultyClearedV1TrapRedundancy: secondary Port is no longer Faulty. TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.79 |
hzIduFan1FailedV1TrapFan 1 has failed TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.80 |
hzIduFan1FailureClearedV1TrapThe Fan 1 Failure has Cleared TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.81 |
hzIduFan2FailedV1TrapFan 2 has failed TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.82 |
hzIduFan2FailureClearedV1TrapThe Fan 2 Failure has Cleared TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.83 |
hzIduFan3FailedV1TrapFan 3 has failed TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.84 |
hzIduFan3FailureClearedV1TrapThe Fan 3 Failure has Cleared TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.85 |
hzIduFan4FailedV1TrapFan 4 has failed TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.86 |
hzIduFan4FailureClearedV1TrapThe Fan 4 Failure has Cleared TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.87 |
hzIduRlsShutdownActivatedv1TrapRLS shutdown is activated TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.88 |
hzIduRlsShutdownActivatedClearedV1TrapRLS shutdown is not activated TRAP-TYPE .1.3.6.1.4.1.7262.2.3.8.0.89 |
hzIduSnmpTrapHostTableTable containing SNMP trap host entries. SEQUENCE OF HzIduSnmpTrapHostEntry .1.3.6.1.4.1.7262.2.3.8.1 |
hzIduSnmpTrapHostEntryThe snmp trap host entry containing all the trap host information HzIduSnmpTrapHostEntry .1.3.6.1.4.1.7262.2.3.8.1.1 |
hzIduSnmpTrapHostIndexA unique value for each trap host.ro INTEGER .1.3.6.1.4.1.7262.2.3.8.1.1.1 |
hzIduSnmpTrapHostModeIndicates how the snmp trap host is obtained for the system.ro Enumeration .1.3.6.1.4.1.7262.2.3.8.1.1.2 |
hzIduSnmpTrapHostIpAddressIndicates snmp trap host IP address.ro IpAddress .1.3.6.1.4.1.7262.2.3.8.1.1.3 |
hzIduSnmpTrapHostCommunityNameThe community string name used in Traps.ro DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.8.1.1.4 |
hzIduSnmpTrapHostActivatedSpecifies whether traps are to be sent to this specific host or notro Enumeration .1.3.6.1.4.1.7262.2.3.8.1.1.5 |
hzIduSnmpV3TrapHostsTableTable containing snmp V3 trap host entries SEQUENCE OF HzIduSnmpV3TrapHostsEntry .1.3.6.1.4.1.7262.2.3.8.2 |
hzIduSnmpV3TrapHostsEntryContains the snmp v3 trap host information HzIduSnmpV3TrapHostsEntry .1.3.6.1.4.1.7262.2.3.8.2.1 |
hzIduSnmpV3TrapHostsIndexA unique value for each v3 trap host.ro INTEGER .1.3.6.1.4.1.7262.2.3.8.2.1.1 |
snmpV3TrapHostIpAddressIndicates snmp trap host IP address.ro IpAddress .1.3.6.1.4.1.7262.2.3.8.2.1.2 |
snmpV3TrapHostUserNameThe user name of the v3 trap host.ro DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.8.2.1.3 |
snmpV3TrapHostAuthProtocolThe authentication alogorithm used by the v3 trap host.ro Enumeration .1.3.6.1.4.1.7262.2.3.8.2.1.4 |
snmpV3TrapHostAuthPasswordThe authentication password of the v3 trap host.ro DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.8.2.1.5 |
snmpV3TrapHostPrivProtocolThe privacy encryption alogorithm used by the v3 trap host.ro Enumeration .1.3.6.1.4.1.7262.2.3.8.2.1.6 |
snmpV3TrapHostPrivPasswordThe privacy password of the v3 trap host.ro DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.8.2.1.7 |
snmpV3TrapHostActivatedSpecifies whether a specific v3 trap host is allowed to access the systemro Enumeration .1.3.6.1.4.1.7262.2.3.8.2.1.8 |
hzIduTrapEnable OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.8.3 |
hzIduColdStartTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.1 |
hzIduLinkDownTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.2 |
hzIduLinkUpTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.3 |
hzIduExplicitAuthenticationFailureTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.4 |
hzIduAamConfigMismatchTrapEnables or disables the aamConfigMismatch trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.5 |
hzIduAamActiveTrapEnables or disables the aamActive trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.6 |
hzIduAtpcConfigMismatchTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.7 |
hzIduSntpServersUnreachableTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.8 |
hzIduFrequencyFileInvalidTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.9 |
hzIduEnetPortDroppedFramesThresholdExceedTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.10 |
hzIduEnetPortBandwidthUtilizationThresholdExceedTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.11 |
hzIduEnetPortRlsMismatchTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.12 |
hzIduRLSQueueBasedShutdownActivatedTrapEnables or disables the Queue-Based RLS Shutdown trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.13 |
hzIduModemRxLossOfSignalLockTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.14 |
hzIduModemTxLossOfSyncTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.15 |
hzIduModemSnrBelowThresholdTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.16 |
hzIduModemEqualizerStressExceedThresholdTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.17 |
hzIduModemChannelizedRslBelowThresholdTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.18 |
hzIduModemHardwareFaultTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.19 |
hzIduModemProgrammingErrorTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.20 |
hzIduTtyManagementSessionCommencedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.21 |
hzIduTtyManagementSessionTerminatedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.22 |
hzIduAtpcTxAtMaxPwrTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.23 |
hzIduRadioPLDROLostLockTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.24 |
hzIduRadioLostCommunicationTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.25 |
hzIduRadioMismatchTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.26 |
hzIduRadioPowerAmpTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.27 |
hzIduRadioExcessiveTxCableLossTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.28 |
hzIduHiPowerRadioDrainM1TrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.29 |
hzIduHiPowerRadioDrainM2TrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.30 |
hzIduHiPowerRadioTxDetectorTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.31 |
hzIduSecondaryRadioIsActiveTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.32 |
hzIduRedundancySerialNumberMisMatchTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.33 |
hzIduRadioFirmwareMismatchTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.34 |
hzIduSecondaryRadioNotdetectedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.35 |
hzIduPrimaryRadioNotdetectedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.36 |
hzIduFaultyPrimaryRadioTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.37 |
hzIduRadioExcessiveTxCableLossChangeTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.38 |
hzIduRadioExcessiveRxCableLossTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.39 |
hzIduRedundancyPrimaryPortNotSetTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.40 |
hzIduRedundancySecondaryPortIsActiveTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.41 |
hzIduRedundancyPrimaryPortFaultyTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.42 |
hzIduRedundancySecondaryPortFaultyTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.43 |
hzIduFan1FailedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.44 |
hzIduFan2FailedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.45 |
hzIduFan3FailedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.46 |
hzIduFan4FailedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.47 |
hzIduPortRLSShutdownActivatedTrapEnables or disables the RLS Shutdown trap.rw Enumeration .1.3.6.1.4.1.7262.2.3.8.3.48 |
hzIduSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.9 |
hzIduSnmpUserAccessSpecifies the user access to the system. If access is set to 'explicitManagers' then only managers with ip addresses set in snmpManagersTable will be able to gain SNMP access to the system. If access is set to 'any' then any manager will be able to gain SNMP access to the systemro Enumeration .1.3.6.1.4.1.7262.2.3.9.1 |
hzIduSnmpManagerAnyCommunityNameThe community string name used by the 'any' manager.ro DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.9.2 |
hzIduSnmpSetRequestsIndicates whether SNMP SET requests are allowed.ro Enumeration .1.3.6.1.4.1.7262.2.3.9.3 |
hzIduSnmpManagersTableTable containing snmp manager entries SEQUENCE OF HzIduSnmpManagersEntry .1.3.6.1.4.1.7262.2.3.9.4 |
hzIduSnmpManagersEntryContains the snmp manager information HzIduSnmpManagersEntry .1.3.6.1.4.1.7262.2.3.9.4.1 |
hzIduSnmpManagersIndexA unique value for each manager.ro INTEGER .1.3.6.1.4.1.7262.2.3.9.4.1.1 |
hzIduSnmpManagerIpAddressThe IP address of the Manager.ro IpAddress .1.3.6.1.4.1.7262.2.3.9.4.1.2 |
hzIduSnmpManagerCommunityNameThe community string name used by the manager.ro DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.9.4.1.3 |
hzIduSnmpManagerActivatedSpecifies whether a specific manager is allowed to access the systemro Enumeration .1.3.6.1.4.1.7262.2.3.9.4.1.4 |
hzIduSnmpV3ManagersTableTable containing snmp V3 manager entries SEQUENCE OF HzIduSnmpV3ManagersEntry .1.3.6.1.4.1.7262.2.3.9.5 |
hzIduSnmpV3ManagersEntryContains the snmp v3 manager information HzIduSnmpV3ManagersEntry .1.3.6.1.4.1.7262.2.3.9.5.1 |
hzIduSnmpV3ManagersIndexA unique value for each v3 manager.ro INTEGER .1.3.6.1.4.1.7262.2.3.9.5.1.1 |
hzIduSnmpV3ManagerUserNameThe user name of the v3 Manager.ro DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.9.5.1.2 |
hzIduSnmpV3ManagerAuthProtocolThe authentication alogorithm used by the v3 manager.ro Enumeration .1.3.6.1.4.1.7262.2.3.9.5.1.3 |
hzIduSnmpV3ManagerAuthPasswordThe authentication password of the v3 Manager.ro DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.9.5.1.4 |
hzIduSnmpV3ManagerPrivProtocolThe privacy encryption alogorithm used by the v3 manager.ro Enumeration .1.3.6.1.4.1.7262.2.3.9.5.1.5 |
hzIduSnmpV3ManagerPrivPasswordThe privacy password of the v3 Manager.ro DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.9.5.1.6 |
hzIduSnmpV3ManagerActivatedSpecifies whether a specific v3 manager is allowed to access the systemro Enumeration .1.3.6.1.4.1.7262.2.3.9.5.1.7 |
hzIduManagementSessions OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.10 |
hzIduTtySessionUserTableA table of Wireless Interface Radios SEQUENCE OF HzIduTtySessionUserEntry .1.3.6.1.4.1.7262.2.3.10.1 |
hzIduTtySessionUserEntryA Wireless Interface Radio HzIduTtySessionUserEntry .1.3.6.1.4.1.7262.2.3.10.1.1 |
hzIduTtySessionUserIndexA unique value for each user.ro Enumeration .1.3.6.1.4.1.7262.2.3.10.1.1.1 |
hzIduTtySessionUserNameThe username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress.ro DisplayString ( SIZE ( 0 .. 32 ) ) .1.3.6.1.4.1.7262.2.3.10.1.1.2 |
hzIduTtySessionUserConnectionTypeThe physical port used to log in to the system. The serial port is always local to the equipment. The 10BaseT connector may be local, or remote, depending on if the configuration of network management port. The inband connection is the port carrying customer traffic.ro Enumeration .1.3.6.1.4.1.7262.2.3.10.1.1.3 |
hzIduTtySessionUserStateThe state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system.ro Enumeration .1.3.6.1.4.1.7262.2.3.10.1.1.4 |
hzIduHttp OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.11 |
hzIduHttpEnableIndicates whether HTTP is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.3.11.1 |
hzIduHttpSecure OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.11.2 |
hzIduHttpSecureCertificateStatusReturns the HTTPS certificate statusro DisplayString ( SIZE ( 0 .. 100 ) ) .1.3.6.1.4.1.7262.2.3.11.2.1 |
hzIduHttpSecureAccessForAdminUsersthe HTTPS access requirement for Admin user group.rw Enumeration .1.3.6.1.4.1.7262.2.3.11.2.2 |
hzIduHttpSecureAccessForNocUsersthe HTTPS access requirement for Noc user group.rw Enumeration .1.3.6.1.4.1.7262.2.3.11.2.3 |
hzIduHttpSecureAccessForSuperUsersthe HTTPS access requirement for Super user group.rw Enumeration .1.3.6.1.4.1.7262.2.3.11.2.4 |
hzIduQos OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.12 |
hzIduQosEnableIndicates whether QOS is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.3.12.1 |
hzIduCosTypeIndicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, or Q-in-Q outer VLAN tag.rw Enumeration .1.3.6.1.4.1.7262.2.3.12.2 |
hzIduCoSQinQiTagSets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.12.3 |
hzIduCoSQinQoTagSets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.12.4 |
hzIduCosQueueMappingUser queue assignments for CoS values 0 to 7.
There are 4 coS queues. Their corresponding
queue numbers are 1,2, 3, where 1 is the lowest priority queue and
4 is the highest priority queue.
CoS to queue mapping example: 1 1 2 2 3 3 4 4.rw DisplayString ( SIZE ( 15 .. 32 ) ) .1.3.6.1.4.1.7262.2.3.12.5 |
hzIduCosExpediteQueueThis sets the user queue operation mode. (a) In expedite mode,
any Queue can be assigned 100% of CIR. Queue 4 is serviced first
and queue 1 is servcied last.(b) In non expedite mode, the sum of all CIRs
must be equal to 100%. In this mode higher priority queues
will be serviced first until that queue is emptied or
the defined CIR is reached.rw Enumeration .1.3.6.1.4.1.7262.2.3.12.6 |
hzIduCosQueueCIRCommitted Information Rate (CIR) assignments for CoS queues
1 to 4. CIR is assigned as the percentage of system current speed.
When expedite queue is enabled any queue can be assigned 100% bandwidth.
When expedite queue is disabled the sum of CIR of all queues should be 100.rw DisplayString ( SIZE ( 0 .. 32 ) ) .1.3.6.1.4.1.7262.2.3.12.7 |
hzIduCosQueueCBSComitted Burst Size (CBS) for CoS queues 1 to 4. CBS is the percentage
of total packet buffer size. The sum of CBS's of all 4
queues must be equal to 100. Minimum CBS assignable to any queue
is 1.rw DisplayString ( SIZE ( 0 .. 32 ) ) .1.3.6.1.4.1.7262.2.3.12.8 |
hzIduCosDefaultValueDefault CoS value assigned to the ethernet
frames that don't have VLAN or Q-in-Q tag.rw INTEGER (0 .. 7) .1.3.6.1.4.1.7262.2.3.12.9 |
hzIduCutThroughProcessingSets cut through processing on/off.rw Enumeration .1.3.6.1.4.1.7262.2.3.12.10 |
hzIduQosPolicySets the Qos policy.rw Enumeration .1.3.6.1.4.1.7262.2.3.12.11 |
hzIduCosWfqWeightThe weight assigned to each of the 4 cos queue. The wireless bandwidth is distributed amongst the
queues proportional to their weight.
The weights have values from 0-15, where 0 is the lowest weight and
15 is the highest weight.
Setting the Cos weight example: 1 2 3 4.rw DisplayString ( SIZE ( 0 .. 32 ) ) .1.3.6.1.4.1.7262.2.3.12.12 |
hzIduRapidLinkShutdown OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.13 |
hzIduRlsEnableThe Rapid Link Shutdown feature: enabled or disabled.
Changing this option requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.3.13.1 |
hzIduRlsHardFaultMonitorEnable the rlsHardFaultMonitor for rapid detection of severely degrade link. When disabled
only the RLS Link Degrade Monitor is used.rw Enumeration .1.3.6.1.4.1.7262.2.3.13.2 |
hzIduRlsWirelessPortOptionanyport - If the IDU is operating with two wireless ports and any one of the wireless ports goes down disables the ethernet port.
bothports - In the above condition, this feature disables the ehternet traffic through the faulty wireless link but continuously send
ethernet traffic through the other good wireless port. If the remaining wireless port also exceeds the error thereshold, ethernet port
will be disabledrw Enumeration .1.3.6.1.4.1.7262.2.3.13.3 |
hzIduRlsAutomaticLinkReestablishIf this feature is enabled, the link will be automatically reestablished
If this feature is disabled, the user must explicitly use the manualReestablish object
to bring the link back uprw Enumeration .1.3.6.1.4.1.7262.2.3.13.4 |
hzIduRlsManualLinkReestablishThis object is writeable ONLY if automaticLinkReestablish is set to disabled.
The user explicitly brings the link back up by setting this object to enabled.
The user explicitly brings the link down by setting this object to disabled.
to bring the link back uprw Enumeration .1.3.6.1.4.1.7262.2.3.13.5 |
hzIduWriteRlsMonitorParametersToSystemThis writes RLS soft and hard fault monitor parameters to RAM
Reading this object returns '1'.rw Enumeration .1.3.6.1.4.1.7262.2.3.13.6 |
hzIduRlsDroppedFramesThresholdOverrideIf the Ethernet is down due to Queue-Based Rls shutdown, this will bring the ethernet back and obey the queue settings.
Reading this object returns '1'.rw Enumeration .1.3.6.1.4.1.7262.2.3.13.7 |
hzIduRlsDroppedFramesThresholdTableA table of RLS Queue Monitor Parameters SEQUENCE OF HzIduRlsDroppedFramesThresholdEntry .1.3.6.1.4.1.7262.2.3.13.8 |
hzIduRlsDroppedFramesThresholdEntryRLS Queue Parameters HzIduRlsDroppedFramesThresholdEntry .1.3.6.1.4.1.7262.2.3.13.8.1 |
hzIduRlsDroppedFramesThresholdIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.13.8.1.1 |
hzIduRlsAllowedDroppedFrameRateValueMaximum allowed ethernet frame drop rate. If the average drop rate exceeds this threshold in any of the 4 queues, the Ethernet port will be shut down.
This feture is availabe only with bothports optionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.8.1.2 |
hzIduRlsDroppedFrameMonitorPeriodThe monitoring period in seconds.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.8.1.3 |
hzIduRlsSoftFaultMonitorTableA table of RLS Soft Fault Monitor Parameters SEQUENCE OF HzIduRlsSoftFaultMonitorEntry .1.3.6.1.4.1.7262.2.3.13.9 |
hzIduRlsSoftFaultMonitorEntryRLS Parameters for Soft Fault Monitoring HzIduRlsSoftFaultMonitorEntry .1.3.6.1.4.1.7262.2.3.13.9.1 |
hzIduRlsSoftFaultMonitorIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.13.9.1.1 |
hzIduRlsEstablishErredFrameThresholdMaximum erred blocks, per sample, allowed for link establishment.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.9.1.2 |
hzIduRlsShutdownErredFrameThresholdMinimum erred blocks, per sample, allowed before link shutdown.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.9.1.3 |
hzIduRlsEstablishNumberOfSamplesMinimum number of consecutive good samples required before link is established.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.9.1.4 |
hzIduRlsShutdownNumberOfSamplesMinimum number of consecutive erred samples before link is shutdown.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.9.1.5 |
hzIduRlsEstablishSamplePeriodPeriod of Time, in milliseconds, for monitoring Establish Erred Frame Threshold.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.9.1.6 |
hzIduRlsShutdownSamplePeriodPeriod of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.9.1.7 |
hzIduRlsQuickShutdownSamplePeriodMinimum number of milliseconds required to classify samples as erred.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.9.1.8 |
hzIduHardFaultMonitorTableA table of RLS Hard Fault Monitor Parameters SEQUENCE OF HzIduHardFaultMonitorEntry .1.3.6.1.4.1.7262.2.3.13.10 |
hzIduHardFaultMonitorEntryRLS Parameters for Hard Fault Monitoring HzIduHardFaultMonitorEntry .1.3.6.1.4.1.7262.2.3.13.10.1 |
hzIduHardFaultMonitorIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.13.10.1.1 |
hzIduRlsHardFaultSamplePeriodThe period of time, in milliseconds, for which the
rlsFaultThreshold is applied.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.10.1.2 |
hzIduRlsHardFaultThresholdAcceptalbe errored block rate in percentrw INTEGER .1.3.6.1.4.1.7262.2.3.13.10.1.3 |
hzIduRlsReceiveSignalLevelMonitorTableA table of RLS RSL Monitor Parameters SEQUENCE OF HzIduRlsReceiveSignalLevelMonitorEntry .1.3.6.1.4.1.7262.2.3.13.11 |
hzIduRlsReceiveSignalLevelMonitorEntryRLS RSL Monitor Parameters HzIduRlsReceiveSignalLevelMonitorEntry .1.3.6.1.4.1.7262.2.3.13.11.1 |
hzIduRlsReceiveSignalLevelMonitorIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.13.11.1.1 |
hzIduRlsMakeRslMonitorRslValueThe RSL threshold, in dBm. When Link is inactive and if RSL
is higher than this threshold for a desired
period, the link will become active.rw DisplayString ( SIZE ( 0 .. 24 ) ) .1.3.6.1.4.1.7262.2.3.13.11.1.2 |
hzIduRlsMakeRslMonitorPeriodThe desired period, in seconds. When Link is inactive and if RSL
is higher than the desired threshold for this
period, the link will become active.rw INTEGER .1.3.6.1.4.1.7262.2.3.13.11.1.3 |
hzIduRlsStatus OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.13.12 |
hzIduRlsCurrentDroppedFramesTableA table of RLS Currently Observed Queue Monitor Parameters SEQUENCE OF HzIduRlsCurrentDroppedFramesEntry .1.3.6.1.4.1.7262.2.3.13.12.1 |
hzIduRlsCurrentDroppedFramesEntryRLS Currently Observed Queue Monitor Parameters HzIduRlsCurrentDroppedFramesEntry .1.3.6.1.4.1.7262.2.3.13.12.1.1 |
hzIduRlsCurrentDroppedFramesIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.13.12.1.1.1 |
hzIduRlsCurrentDroppedFramesRateValueRLS Current Ethernet Frame drop ratero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.1.1.2 |
hzIduRlsCurrentDroppedFrameMonitorPeriodQueue Monitoring timero INTEGER .1.3.6.1.4.1.7262.2.3.13.12.1.1.3 |
hzIduRlsCurrentQueueStatusQueue Status - OK: drop rate is within the threshold, Activated: Exceeded the drop thresholdro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.1.1.4 |
hzIduRlsStatusTableA table of RLS Parameters and states SEQUENCE OF HzIduRlsStatusEntry .1.3.6.1.4.1.7262.2.3.13.12.2 |
hzIduRlsStatusEntryRLS Parameters and states HzIduRlsStatusEntry .1.3.6.1.4.1.7262.2.3.13.12.2.1 |
hzIduRlsStatusIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.3.13.12.2.1.1 |
hzIduRlsOptionRLS Option. On Basic: RLS enabled with base degrade monitoring;
On Advanced: RLS enabled with hard fault monitoring;
On Anyport: If any one of the wireless links exceeds the threshold Ehternet Port will be shut down
On Bothports: Both wireless links should exceed the threshold to bring the Ethernet Port down
Off: Entire RLS feature disabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.2 |
hzIduRlsStateRapid Link Shutdown State. If the state is activated, that means
The wireless link is down for Ethernet traffic; If the state is inactivated, that means that
wireless link is up for Ethernet traffic.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.3 |
hzIduRlsMismatchStateRLS Mismatch State. If the state is activated, that means RLS
configuration is mismatched with peer. If the state is OK,
that means RLS configuration is matched with peer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.4 |
hzIduDegradeMonitorStateDegrade Monitor State. If the state is activated, that means
the RLS Degrade Monitor is asserting the link down. If the
state is OK, that means the RLS Degrade Monitor is asserting
the link up.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.5 |
hzIduHardFaultMonitorStateHard Fault Monitor State. If the state is activated, that means
the Hard Fault Monitor is asserting the link down. If the state
is OK, that means the RLS Hard Fault Monitor is asserting the
link up.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.6 |
hzIduMakeRslThresholdStateMake RSL Threshold State. If the state is not met, that means the
RLS signal level is below the threshold value. If the state is OK,
that means the RLS signal level is above the threshold value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.7 |
hzIduPeerRlsStatePeer RLS State. If the state is activated, that means the peer has
activated RLS. If the state is OK, that means the Peer hasn't
activated RLS.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.8 |
hzIduRadioInterfaceStateRadio Interface State. If the state is down, that means The radio
interface is not operational(muted,disconnected, not configured).
If the state is up, that means the radio interface is operational.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.9 |
hzIduNetworkInterfaceStateNetwork Interface State. If the state is down, that means the network
interface (Ethernet/PHY) is not operational(disconnected, not
configured). If the state is up, that means the network interface
(Ethernet/PHY) is operational.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.10 |
hzIduUserConfiguredEstablishFerUser Configured Establish Frame Error Ratio required for the
link to be restored to service, set by the user. An example
value being '1.0E-7'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.11 |
hzIduMinimumAchievableEstablishFerMinimum achievable Frame Error Ratio required for the link to be
restored to service. An example value being '1.0E-7'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.12 |
hzIduUserConfiguredShutdownFerUser Configured Shutdown Frame Error Ratio required for the
link to remain in-service, set by the user. An example value
being '1.0E-7'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.13 |
hzIduMinimumAchievableShutdownFerMinimum achievable Frame Error Ratio required for the link to
remain in-service. An example value being '1.0E-7'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.3.13.12.2.1.14 |
hzIduUserConfiguredEstablishMonitorTimeUser Configured Establish Monitor Time, in milliseconds, for
which the 'User Configured Establish FER' must be achieved
to bring link into service, set by userro INTEGER .1.3.6.1.4.1.7262.2.3.13.12.2.1.15 |
hzIduActualEstablishMonitorTimeActual Establish Monitor Time, in milliseconds, for which the
'User Configured Establish FER' must be achieved to bring
link into service, it's a multiple of the establish sample
period required to observe the FERro INTEGER .1.3.6.1.4.1.7262.2.3.13.12.2.1.16 |
hzIduUserConfiguredShutdownMonitorTimeUser Configured Shutdown Monitor Time, in milliseconds, for which
the 'User Configured Shutdown FER' must be met for the link to
remain in-service, set by user.ro INTEGER .1.3.6.1.4.1.7262.2.3.13.12.2.1.17 |
hzIduActualShutdownMonitorTimeActual Shutdown Monitor Time, in milliseconds, for which the 'User
Configured Shutdown FER' must be met for the link to remain
in-service, it's a multiple of the shutdown sample period required
to observe the FERro INTEGER .1.3.6.1.4.1.7262.2.3.13.12.2.1.18 |
hzIduSntp OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.14 |
hzIduSntpEnableIndicates whether SNTP feature is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.3.14.1 |
hzIduSntpOffsetSystem time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour.rw INTEGER ( -140 .. 140 ) .1.3.6.1.4.1.7262.2.3.14.2 |
hzIduSntpServerTableTable containing sntp server entries SEQUENCE OF HzIduSntpServerEntry .1.3.6.1.4.1.7262.2.3.14.3 |
hzIduSntpServerEntryContains the sntp server information HzIduSntpServerEntry .1.3.6.1.4.1.7262.2.3.14.3.1 |
hzIduSntpServerIndexA unique value for each server.ro INTEGER .1.3.6.1.4.1.7262.2.3.14.3.1.1 |
hzIduSntpServerIpAddressThe IP address of the server.rw IpAddress .1.3.6.1.4.1.7262.2.3.14.3.1.2 |
hzIduSntpServerStatusThe status of the sntp server.ro Enumeration .1.3.6.1.4.1.7262.2.3.14.3.1.3 |
hzIduSntpServerStratumSpecifies the stratum of a server, 0 for failed serverro INTEGER .1.3.6.1.4.1.7262.2.3.14.3.1.4 |
hzIduLogs OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.15 |
hzIduEventLogEnableIndicates whether event log is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.3.15.1 |
hzIduPerfmLogEnableIndicates whether performance log is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.3.15.2 |
hzIduPerfmLogIntervalPerformance statistics are logged periodically by this interval. The interval can be up to 24:00:00 (24 hours) and as short as 00:00:15 (15 seconds).rw DisplayString ( SIZE ( 0 .. 10 ) ) .1.3.6.1.4.1.7262.2.3.15.3 |
hzIduRadius OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.3.16 |
hzIduRadiusSuperUserAuthenticationThe set strict mode on or offrw Enumeration .1.3.6.1.4.1.7262.2.3.16.1 |
hzIduRadiusServerTimeOutTimeout period for authentication requestsro INTEGER .1.3.6.1.4.1.7262.2.3.16.2 |
hzIduRadiusServerDeadTimeTime to declare an unresponsive server 'dead'ro INTEGER .1.3.6.1.4.1.7262.2.3.16.3 |
hzIduRadiusServerReTransmitMaximum number of retransmits to an unresponsive serverro INTEGER .1.3.6.1.4.1.7262.2.3.16.4 |
hzIduRadiusServerTableTable containing radius server entries SEQUENCE OF HzIduRadiusServerEntry .1.3.6.1.4.1.7262.2.3.16.5 |
hzIduRadiusServerEntryContains the sntp server information HzIduRadiusServerEntry .1.3.6.1.4.1.7262.2.3.16.5.1 |
hzIduRadiusServerIndexA unique value for each server.ro INTEGER .1.3.6.1.4.1.7262.2.3.16.5.1.1 |
hzIduRadiusCfgdHostIpAddressThe IP address of the configured radius server.rw IpAddress .1.3.6.1.4.1.7262.2.3.16.5.1.2 |
hzIduRadiusActiveHostIpAddressThe IP address of the active radius server.ro IpAddress .1.3.6.1.4.1.7262.2.3.16.5.1.3 |