DRAGONWAVE-HORIZON-QUANTUM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DRAGONWAVE-HORIZON-QUANTUM-MIB.
Main OID:
hzQtmModIdentity.1.3.6.1.4.1.7262.2.4.1000
790
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
790 total| Object Name |
|---|
horizonQuantum OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4 |
hzQtmSystem OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1 |
hzQtmSysGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.1 |
hzQtmResetSystemWriting '1' to this object resets the NIC, Modem, and radio.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.1.1 |
hzQtmSaveMIBWriting '1' or 'save' to this object save all MIB values.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.1.2 |
hzQtmOperStatusThe current operational state of the system.
Testing indicates that no operational packets can be passed.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.1.3 |
hzQtmAirInterfaceEncryptionOBSOLETE. This enables encryption on the air interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.1.4 |
hzQtmSystemCapacityOptionSets the system capacity options. There are four options:
Select 'singleModem-singleRadio' for a 400Mbps system.
Select 'multiModem-singleRadio' for 800Mbps when the system is equipped with an internal or external IF Coupler.
Select 'multiModem-multiRadio' for 800Mbps when the system is equipped with two radios connected to a Dual Polarization Radio Mount (DPRM).
Select 'singleModem-redundancy' to provide a redundant 400Mbps link using a Redundant Dual Radio Mount (RDRM).
Select 'multiCarrierXpic' when two systems are connected together to provide a four channels XPIC link.
Notes:
Setting the system capacity to 'singleModem-redundancy will fail if the primary path has not been set to either wireless_port1 or wireless_port2.
Setting the system capacity to 'multiModem-multiRadio' will set the transmit power of wireless_port2 to the same transmite power as wireless_port1.
Changing system capacity requires a reset in order to be activated.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.1.5 |
hzQtmSystemLedStatusIndicates the current LED status and colour.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.1.6 |
hzQtmSaveL2SwConfigWriting '1' or 'save' to this object will save all L2 Switch config values.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.1.7 |
hzQtmIduTemperatureThe IDU temperature in degree Celsius. The actual temperature is determined by dividing the number by 100. e.g. 2825 is actually 28.25 degrees Celsius.ro Integer32 .1.3.6.1.4.1.7262.2.4.1.1.8 |
hzQtmSysUpgradeSpeed OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.2 |
hzQtmLicensedSpeedUpgradeSpeedAndKeyEnter your key here along with the maximum speed for that key to upgrade the system.
Format: [speed] [key]
Example: 800 abc123rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.2.1 |
hzQtmLicensedSpeedCountThis object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.ro Integer32 .1.3.6.1.4.1.7262.2.4.1.2.2 |
hzQtmSysDowngradeSpeed OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.3 |
hzQtmLicensedSpeedDowngradeSpeedReduce your licensed speed by entering a speed to this write-only object and take note of the generated key in hzQtmDowngradeLicensedSpeedKey.
Format: [speed]
Example: 200rw Integer32 .1.3.6.1.4.1.7262.2.4.1.3.1 |
hzQtmLicensedSpeedCountUsedForKeyThis object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.ro Integer32 .1.3.6.1.4.1.7262.2.4.1.3.2 |
hzQtmLicensedSpeedConfirmationKeyThis read-only object will show a 'key' after successfully downgrading the license speed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.3.3 |
hzQtmSysDowngradeSpeedDecrementro Integer32 .1.3.6.1.4.1.7262.2.4.1.3.4 |
hzQtmSysSpeed OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.4 |
hzQtmSystemCurrentSpeedChanges the working speed of the horizon. Writes are only valid if system is a FLEX. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps.rw Integer32 .1.3.6.1.4.1.7262.2.4.1.4.1 |
hzQtmSystemLicensedSpeedIndicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps.ro Integer32 .1.3.6.1.4.1.7262.2.4.1.4.2 |
hzQtmSystemModeTableA table of system mode settings SEQUENCE OF HzQtmSystemModeEntry .1.3.6.1.4.1.7262.2.4.1.4.3 |
hzQtmSystemModeEntryA system mode entry containing all the system mode values HzQtmSystemModeEntry .1.3.6.1.4.1.7262.2.4.1.4.3.1 |
hzQtmSystemModeIndexA unique value for each system mode.ro Integer32 .1.3.6.1.4.1.7262.2.4.1.4.3.1.1 |
hzQtmSystemModeIdSystem mode Id.ro Integer32 .1.3.6.1.4.1.7262.2.4.1.4.3.1.2 |
hzQtmSystemModeNameThe system mode name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.4.3.1.3 |
hzQtmSystemModeProgrammedSpecifies the operating system mode for the modem.
Notes:
Only 1 index may be selected.
Changing this option requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.4.3.1.4 |
hzQtmInventory OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.5 |
hzQtmHwInventory OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.5.1 |
hzQtmFrequencyFilePartNumberA textual string containing Part Number of the Frequency Filero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.1 |
hzQtmUnitSerialNoA textual string containing Serial Number of the Unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.2 |
hzQtmUnitAssemblylNoA textual string containing the Assembly Number of the Unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.3 |
hzQtmCcaSerialNoA textual string containing Serial no of the NCC.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.4 |
hzQtmCcaPartNoA textual string containing assembly no of the NCC.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.5 |
hzQtmRadio1SerialNoA textual string containing the serial number of radio 1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.6 |
hzQtmRadio2SerialNoA textual string containing the serial number of radio 2 if configuredro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.7 |
hzQtmRadio1HardwareIdA textual string containing the hardware id of radio 1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.8 |
hzQtmRadio2HardwareIdA textual string containing the hardware id of radio 2 if configuredro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.9 |
hzQtmRadio1HardwareTypeA textual string containing the hardware type for radio 1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.10 |
hzQtmRadio2HardwareTypeA textual string containing the hardware type for radio 2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.1.11 |
hzQtmSwInventory OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.5.2 |
hzQtmSwInvAppOmniVersionNoThe version number of the Omni.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.1 |
hzQtmSwInvAppFirmwareVersionNoThe version number of the FPGA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.2 |
hzQtmSwInvFrequencyFileVersionNoThe version number of the FrequencyFile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.3 |
hzQtmSwInvMibVersionNoThe version number of the MIB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.4 |
hzQtmSwInvRadioFirmware1VersionNoThe radio firmware1 version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.5 |
hzQtmSwInvRadioFirmware2VersionNoThe radio firmware2 version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.6 |
hzQtmSwInvAppSoftwareVersionNoThe version number of the application software.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.7 |
hzQtmSwInvBootloaderVersionNoThe bootloader version number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.8 |
hzQtmSwInvSupportingAppVersionNoThe version number for the third party applications such as ECFM etc...ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.9 |
hzQtmSwInvOperatingSystemVersionNoThe version number of the running operating system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.10 |
hzQtmSwInvRadio1CurrentFirmwareVersionNoThe current running firmware version for Radio1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.11 |
hzQtmSwInvRadio2CurrentFirmwareVersionNoThe current running firmware version for Radio2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.5.2.12 |
hzQtmAtpc OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.6 |
hzQtmAtpcEnableIndicates whether Automatic Transmit Power Control (ATPC) is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.6.1 |
hzQtmAtpcStatusIndicates the actual condition of ATPC:
Enabled if config is on and no issues
Auto-Disabled when ATPC coordinated power alarm present
Disabled-manual if config set to offro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.6.2 |
hzQtmAtpcCoordinatedPowerThe Coordinated Power can be enabled by specifying the coordinated power status and coordinated power offset in a string with the following format (without the single quotes):
'<on [offset] | off>'
The offset can optionally be specified after the 'on' string and after a single space and can be be between 0.0 and 10.0 inclusive. The 'offset' is represented in dBm and indicates the offset below TxPower. The accuracy is limited to tenths of dBm so an offset of 9.99 is recognized as 9.9 dBm.
Examples: 'on 5.5' or 'off'rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.6.3 |
hzQtmHitlessAam OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.7 |
hzQtmHitlessAamStatusRead or set the Hitless Automatic Adaptive Modulation (HAAM) as 'on' or 'off'.
HAAM feature is only available when system peer link compatibility mode is Quantum.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.7.1 |
hzQtmHitlessAamManualModeRead or set the Hitless Automatic Adaptive Modulation (HAAM) Manual Mode as 'on' or 'off'.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.7.2 |
hzQtmHitlessAamTableA table of Hitless Aam. SEQUENCE OF HzQtmHitlessAamEntry .1.3.6.1.4.1.7262.2.4.1.7.3 |
hzQtmHitlessAamEntryHitless Aam Status and Configurations. HzQtmHitlessAamEntry .1.3.6.1.4.1.7262.2.4.1.7.3.1 |
hzQtmHitlessAamIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.7.3.1.1 |
hzQtmHitlessAamCurrentModeA read-only string specifing the currently running Hitless AAM Mode.ro DisplayString .1.3.6.1.4.1.7262.2.4.1.7.3.1.2 |
hzQtmHitlessAamDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.7.4 |
hzQtmHitlessAamModem1DiagnoseThis service effecting write-only object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively for modem1. Poll the hzQtmAamModem1DiagnosticResult object to determine the results.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.7.4.1 |
hzQtmHitlessAamModem1DiagnosticResultThe result from Hitless AAM Diagnostic for modem1 is read from this object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.7.4.2 |
hzQtmHitlessAamModem2DiagnoseThis service effecting write-only object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively for modem2. Poll the hzQtmAamModem2DiagnosticResult object to determine the results.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.7.4.3 |
hzQtmHitlessAamModem2DiagnosticResultThe result from Hitless AAM Diagnostic for modem2 is read from this object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.7.4.4 |
hzQtmHitlessAamMaxModeEnter a string indicating the highest allowed system mode to be used for Hitless AAM. Example: hz50_364_256qamrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.7.5 |
hzQtmHitlessAamMinModeEnter a string indicating the lowest allowed system mode to be used for Hitless AAM. Example: hz50_67_qpskrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.7.6 |
hzQtmPeerSysInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.8 |
hzQtmPeerMacAddressThe MAC Address of the peer network interface card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.8.1 |
hzQtmPeerIpAddressThe IP Address of the peer network interface card.ro IpAddress .1.3.6.1.4.1.7262.2.4.1.8.2 |
hzQtmPeerSubnetMaskThe subnet mask for the peer network interface card.ro IpAddress .1.3.6.1.4.1.7262.2.4.1.8.3 |
hzQtmBac OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.9 |
hzQtmBacTable SEQUENCE OF HzQtmBacEntry .1.3.6.1.4.1.7262.2.4.1.9.1 |
hzQtmBacEntry HzQtmBacEntry .1.3.6.1.4.1.7262.2.4.1.9.1.1 |
hzQtmBacQIndexA unique value for each of the 4 Queues.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.9.1.1.1 |
hzQtmBacQEnableConfigure Queue Compression state to disable/enable.
BAC feature is only available when system peer link compatibility mode is Quantum.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.9.1.1.2 |
hzQtmBacQBlockSizeConfigure Queue Compression block size (128...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes.
Valid block sizes are <256 512 1024 4032 8000>rw Integer32 .1.3.6.1.4.1.7262.2.4.1.9.1.1.3 |
hzQtmSysDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.10 |
hzQtmIFPath1LoopbackAndTimeoutTo enable or disable IF path1 loopback. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended.
Enter loopback on | off along with the timeout value.
Format: [on | off] [timeout in sec]
Example: on 40
Enabling loopback is service disruptive.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.10.1 |
hzQtmIFPath2LoopbackAndTimeoutTo enable or disable IF path2 loopback. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended.
Enter loopback on | off along with the timeout value.
Format: [on | off] [timeout in sec]
Example: on 40
Enabling loopback is service disruptive.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.10.2 |
hzQtmRadio1LoopbackAndTimeoutTo enable or disable radio1 loopback. This feature is only supported when 1002+ radio is connected.
If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended.
Enter loopback on | off along with the timeout value.
Format: [on | off] [timeout in sec]
Example: on 40
Enabling loopback is service disruptive.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.10.3 |
hzQtmRadio2LoopbackAndTimeoutTo enable or disable radio2 loopback. This feature is only supported when 1002+ radio is connected.
If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended.
Enter loopback on | off along with the timeout value.
Format: [on | off] [timeout in sec]
Example: on 40
Enabling loopback is service disruptive.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.10.4 |
hzQtmSysLicensedFeatureGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.11 |
hzQtmSysUpgradeFeatureGroupsTableA table of system upgrade feature groups. SEQUENCE OF HzQtmSysUpgradeFeatureGroupsEntry .1.3.6.1.4.1.7262.2.4.1.11.1 |
hzQtmSysUpgradeFeatureGroupsEntryA system upgrade feature group entry containing all licensed feature groups. HzQtmSysUpgradeFeatureGroupsEntry .1.3.6.1.4.1.7262.2.4.1.11.1.1 |
hzQtmUpgradeLicensedFeatureIndexA unique value for each licensed group. Please note XPIC, HAAM and
BAC feature is only available when system peer link compatibility mode is Quantum.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.11.1.1.1 |
hzQtmUpgradeLicensedFeatureKeyThe key required for upgrading a feature.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.11.1.1.2 |
hzQtmUpgradeLicensedFeatureCountThis object indicates the number of times the licensed feature has been changed successfully.ro Integer32 .1.3.6.1.4.1.7262.2.4.1.11.1.1.3 |
hzQtmSysDowngradeFeatureGroupsTableA table of system downgrade system groups. SEQUENCE OF HzQtmSysDowngradeFeatureGroupsEntry .1.3.6.1.4.1.7262.2.4.1.11.2 |
hzQtmSysDowngradeFeatureGroupsEntryA system downgrade feature group entry containing all licensed feature groups. HzQtmSysDowngradeFeatureGroupsEntry .1.3.6.1.4.1.7262.2.4.1.11.2.1 |
hzQtmDowngradeLicensedFeatureIndexA unique value for each licensed group.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.11.2.1.1 |
hzQtmDowngradeLicensedFeatureDowngrading a licensed feature.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.11.2.1.2 |
hzQtmDowngradeLicensedFeatureCountThis object indicates the number of times the licensed feature has been downgraded.ro Integer32 .1.3.6.1.4.1.7262.2.4.1.11.2.1.3 |
hzQtmDowngradeLicensedFeatureKeyThe key generated after downgrading a licensed feature.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.11.2.1.4 |
hzQtmSysLicensedFeatureGroupsTable SEQUENCE OF HzQtmSysLicensedFeatureGroupsEntry .1.3.6.1.4.1.7262.2.4.1.11.3 |
hzQtmSysLicensedFeatureGroupsEntry HzQtmSysLicensedFeatureGroupsEntry .1.3.6.1.4.1.7262.2.4.1.11.3.1 |
hzQtmSysLicensedFeatureGroupIndexA unique value for each licensed group.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.11.3.1.1 |
hzQtmSysLicensedFeatureGroupThe name of the licensed feature group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.11.3.1.2 |
hzQtmSysLicensedFeatureGroupStatusSpecifies whether the feature group is unlicensed or licensed.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.11.3.1.3 |
hzQtmXpic OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.12 |
hzQtmXpicStatusRead or set the XPIC as 'on' or 'off'.
XPIC feature is only available when system peer link compatibility mode is Quantum.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.12.1 |
hzQtmXpicActualStatusRead the actual XPIC status as 'on' or 'off'.
XPIC feature is only available when system peer link compatibility mode is Quantum.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.12.2 |
hzQtmXpicModeRead or set the XPIC mode.
The XPIC mode defines which system is controlling the radio (master) in a Multi Carrier XPIC configuration.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.12.3 |
hzQtmPlcm OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.13 |
hzQtmPlcmModeDecides if the peer in the link is a Quantum or a Duo.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.13.1 |
hzQtmPlcmConfigQtmAsDuoWhen enabled, a DUO compatible configuration is used when PLCM is configured as QTM.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.13.2 |
hzQtmPlcmPeerOmniVersionTableA table of omni version of the peer when PLCM mode is configured as Duo SEQUENCE OF HzQtmPlcmPeerOmniVersionEntry .1.3.6.1.4.1.7262.2.4.1.13.3 |
hzQtmPlcmPeerOmniVersionEntryA omni version of the peer when PLCM mode is configured as Duo entry containing all the omni version HzQtmPlcmPeerOmniVersionEntry .1.3.6.1.4.1.7262.2.4.1.13.3.1 |
hzQtmPlcmPeerOmniVersionIndexA unique value for each peer omni name.ro Integer32 .1.3.6.1.4.1.7262.2.4.1.13.3.1.1 |
hzQtmPlcmPeerOmniVersionNameThe peer omni name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.13.3.1.2 |
hzQtmPlcmPeerOmniVersionProgrammedomni version of the peer when PLCM mode is configured as Duo.
Notes:
Only 1 index may be selected.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.13.3.1.3 |
hzQtmPlcmMgtInterfaceDecide the peer link management interface when PLCM mode is configured as a Duo.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.13.4 |
hzQtmPlcmDataPortDescribes the Ethernet traffic Port when PLCM mode is configured as a Duo.
Data port and management port have to be same when configured as 'inband'
management and data port and management port cannot be same for 'outOfBand'
and 'port2 extended' configuration.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.13.5 |
hzQtmPlcmDataVlanTagIndicates the Vlan Tag Id (1...4095)for Ethernet data when PLCM mode is configured as a Duo.rw Integer32 .1.3.6.1.4.1.7262.2.4.1.13.6 |
hzQtmPlcmMgmtPortDescribes the network management traffic port when PLCM mode is configured as a Duo.
Data port and management port have to be same when configured as 'inband'
management and data port and management port cannot be same for 'outOfBand'
and 'port2 extended' configuration.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.13.7 |
hzQtmPlcmMgmtVlanTaggingDescribes the network management traffic on has VLAN tagging on or not when PLCM mode is configured as a Duo.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.13.8 |
hzQtmPlcmMgmtVlanTagIndicates the Vlan Tag Id (1...4095)for management data when PLCM mode is configured as a Duo.rw Integer32 .1.3.6.1.4.1.7262.2.4.1.13.9 |
hzQtmPlcmMgmtTagPriorityThe priority for vlan tagging (0...7)for management data when PLCM mode is configured as a Duo.rw Integer32 .1.3.6.1.4.1.7262.2.4.1.13.10 |
hzQtmPlcmApplySaveResetSystemWriting '1' to this object apply peer link compatibility mib changes,
save the mib and resets the NIC, Modem, and radio.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.13.20 |
hzQtmBandwidthDoubling OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.14 |
hzQtmBandwidthDoublingModeRead or set bandwidth doubling mode.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.14.1 |
hzQtmBandwidthDoublingActualModeRead the actual bandwidth doubling mode.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.14.2 |
hzQtmBandwidthDoublingPortRead or set the bandwidth doubling data port interconnected between two systems.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.14.3 |
hzQtmBandwidthDoublingActualPortRead the actual bandwidth doubling data port interconnected between two systems.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.14.4 |
hzQtmSyncE OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.1.15 |
hzQtmSyncEModeSynchronous Ethernet support. When synchE is enabled, it can take clock from the following sources: free-run, Ethernet port3 to port8, wireless port1 or wireless port2.
off: disables synchE support.
manual: user specifies which port's incoming clock is to be used as clock source. If the specified port has no incoming clock, free-run will be used.
auto: using user configured clock source prority, Quantum selects the best available clock as source.
esmc: Quantum works in Ethernet Synchronization Messaging Channel mode. It supports Synchronous Status Message.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.15.1 |
hzQtmSyncEPrimarySourceSelects which port to be used as syncE primary clock source.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.15.2 |
hzQtmSyncESecondarySourceSelects which port to be used as syncE secondary when the master syncE is not available.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.15.3 |
hzQtmSyncEMemberPortsEnter a string indicating all SyncE member ports.
Example: p3 wp1
Port options: p3 p4 p5 p6 p7 p8 wp1 wp2rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.15.4 |
hzQtmSyncEForcedHoldoverThis forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be over. The forced timeout can be 0 to 300sec, 0 means infinite and default is 30sec.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.15.5 |
hzQtmSyncERevertiveIn revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.15.6 |
hzQtmSyncEClockSourceRetrieves Synce clock source.ro Enumeration .1.3.6.1.4.1.7262.2.4.1.15.7 |
hzQtmSyncEAcquisitionStatusRetrieves Synce acquisition status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.1.15.8 |
hzQtmSyncEWanderFilterITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hiearchy , option1, vs those based on the 1.544kbit/s hiearchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a badwidth between 1 and10 Hz.rw Enumeration .1.3.6.1.4.1.7262.2.4.1.15.9 |
hzQtmAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.2 |
hzQtmUniquePeerAuthenticationKeyThe serial number of the peer node that this node will communicate with.
This is only used when authentication mode is set to unique.rw DisplayString .1.3.6.1.4.1.7262.2.4.2.1 |
hzQtmPeerDetectedSerialNumberThe serial number of the peer node that the system is presently communicating
with. This is only used when authentication is set to unique.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.2.2 |
hzQtmAuthenticationModeThis sets the authentication mode for the system.If configured for unique
authentication, an horizon node only exchanges user traffic with one other
horizon node. The serial number is used in this case.
If configured for group authentication, an horizon node exchanges user
traffic with another horizon node of the same group and uses the
authentication keys.
Note: Changing this option requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.4.2.3 |
hzQtmAuthenticationFailureActionThis sets the authentication failure action for the system.
Block traffic will block all user traffic including remote
management access. Pass traffic will allow all user traffic
to be sent and recieved
Note: Changing this option requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.4.2.4 |
hzQtmPeerAuthenticationStatusSpecifies the current authentication status of the system.
Authenticated means authentication is on and the system
has been authenticated, notAuthenticated means authentication
is off or the system has not communicated yet with the other node,
explicit authentication failure means authentication is on and
authentication has failedro Enumeration .1.3.6.1.4.1.7262.2.4.2.5 |
hzQtmGroupAuthenticationKeyThe serial number of the group that this node will communicate within.
This is only used when authentication mode is set to group.rw DisplayString .1.3.6.1.4.1.7262.2.4.2.6 |
hzQtmNetworkManagement OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.3 |
hzQtmMacAddressThe MAC Address of the network interface card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.3.1 |
hzQtmIpAddressThe IP Address of the network interface card.
Note: Changing IP Address requires a system reset.ro IpAddress .1.3.6.1.4.1.7262.2.4.3.2 |
hzQtmSubnetMaskThe subnet mask for the network interface card.
Note: Changing Subnet Mask requires a system reset.ro IpAddress .1.3.6.1.4.1.7262.2.4.3.3 |
hzQtmDefaultGatewayThe default gateway for the network interface card.
Note: Changing Default Gateway requires a system reset.ro IpAddress .1.3.6.1.4.1.7262.2.4.3.4 |
hzQtmTelnetAccessModeIndicates whether Telnet access is allowed.rw Enumeration .1.3.6.1.4.1.7262.2.4.3.5 |
hzQtmSshAccessModeIndicates whether ssh access is allowed.rw Enumeration .1.3.6.1.4.1.7262.2.4.3.6 |
hzQtmNetworkManagementInterface OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.3.8 |
hzQtmNetMgmtPortListDescribes the network management interface connection options. Enter a string indicating all management ports.
Example: p1 p4 p6 dp3
Switch Port options: p1 p2 p3 p4 p5 p6 p7 p8 dp1 dp2 dp3 dp4
Note: Changing this option requires a system reset.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.3.8.1 |
hzQtmNetMgmtVlanTagIdIndicates the Vlan Tag Id (1...4095).
Note: Changing this option requires a system reset.rw Integer32 .1.3.6.1.4.1.7262.2.4.3.8.2 |
hzQtmNetMgmtVlanTagPriorityThe priority for vlan tagging (0...7)
Note: Changing this option requires a system reset.rw Integer32 .1.3.6.1.4.1.7262.2.4.3.8.3 |
hzQtmNetworkInterface OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.4 |
hzQtmEnetPort OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.4.1 |
hzQtmEnetPortConfigTable SEQUENCE OF HzQtmEnetPortConfigEntry .1.3.6.1.4.1.7262.2.4.4.1.1 |
hzQtmEnetPortConfigEntry HzQtmEnetPortConfigEntry .1.3.6.1.4.1.7262.2.4.4.1.1.1 |
hzQtmEnetPortIndexro Enumeration .1.3.6.1.4.1.7262.2.4.4.1.1.1.1 |
hzQtmEnetPortNameDescribes the port interface namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.4.1.1.1.2 |
hzQtmEnetPortAutoNegotiationTurns auto-negotiation on or off for Ethernet Port. Turning off results in the interface defaulting to 100BaseT, Full Duplex.rw Enumeration .1.3.6.1.4.1.7262.2.4.4.1.1.1.3 |
hzQtmEnetPortSpeedConfigure the port interface speed .rw Enumeration .1.3.6.1.4.1.7262.2.4.4.1.1.1.4 |
hzQtmEnetPortDuplexConfigure the port interface duplex.rw Enumeration .1.3.6.1.4.1.7262.2.4.4.1.1.1.5 |
hzQtmEnetPortMediaConfigure the port interface media.ro Enumeration .1.3.6.1.4.1.7262.2.4.4.1.1.1.6 |
hzQtmEnetPortAdminStateEnable or disable the admin status of the port.rw Enumeration .1.3.6.1.4.1.7262.2.4.4.1.1.1.7 |
hzQtmEnetPortPauseFrameWhen PAUSE is enabled, port pause frames can be generated by the system and the pause frames will flow toward the link partner on the network. Pause frams can be enabled for Rx, Tx or both.
When PAUSE is not enabled, no pause frames will be generated by the system.rw Enumeration .1.3.6.1.4.1.7262.2.4.4.1.1.1.8 |
hzQtmEnetPortMaxFrameSizeThe default maximum frame size is 1600 bytes.
The settable lowest maximum frame size is 1600, and the settable
highest maximum frame size is 9600. If the chosen maximum
frame size is out of this range, the default maximum frame
size of 1600 is used.rw Integer32 .1.3.6.1.4.1.7262.2.4.4.1.1.1.9 |
hzQtmEnetPortStatusTable SEQUENCE OF HzQtmEnetPortStatusEntry .1.3.6.1.4.1.7262.2.4.4.1.2 |
hzQtmEnetPortStatusEntry HzQtmEnetPortStatusEntry .1.3.6.1.4.1.7262.2.4.4.1.2.1 |
hzQtmEnetPortStatusIndexro Enumeration .1.3.6.1.4.1.7262.2.4.4.1.2.1.1 |
hzQtmEnetPortLinkStatusIndicates the port link status.ro Enumeration .1.3.6.1.4.1.7262.2.4.4.1.2.1.2 |
hzQtmEnetPortAutoNegotiationStatusIndicates the port AutoNegotiation status.ro Enumeration .1.3.6.1.4.1.7262.2.4.4.1.2.1.3 |
hzQtmEnetPortSpeedStatusIndicates the port interface speed status.ro Enumeration .1.3.6.1.4.1.7262.2.4.4.1.2.1.4 |
hzQtmEnetPortDuplexStatusIndicates the port interface duplex status.ro Enumeration .1.3.6.1.4.1.7262.2.4.4.1.2.1.5 |
hzQtmEnetPortMediaStatusIndicates the port interface media status.ro Enumeration .1.3.6.1.4.1.7262.2.4.4.1.2.1.6 |
hzQtmEnetPortStatsTable SEQUENCE OF HzQtmEnetPortStatsEntry .1.3.6.1.4.1.7262.2.4.4.1.3 |
hzQtmEnetPortStatsEntry HzQtmEnetPortStatsEntry .1.3.6.1.4.1.7262.2.4.4.1.3.1 |
hzQtmEnetPortStatsIndexro Enumeration .1.3.6.1.4.1.7262.2.4.4.1.3.1.1 |
hzQtmEnetPortRxBytesThe total number of bytes received on the
interface, including framing characters.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.2 |
hzQtmEnetPortRxUcastPktsThe number of subnetwork-unicast packets delivered to a higher-layer protocol.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.3 |
hzQtmEnetPortRxNUcastPktsThe number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.4 |
hzQtmEnetPortRxDiscardsThe number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up buffer space.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.5 |
hzQtmEnetPortRxErrorsThe number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.6 |
hzQtmEnetPortRxUnknownProtosThe number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.7 |
hzQtmEnetPortTxBytesThe total number of bytes transmitted out of the
interface, including framing characters.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.8 |
hzQtmEnetPortTxUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.9 |
hzQtmEnetPortTxNUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.10 |
hzQtmEnetPortTxDiscardsThe number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.11 |
hzQtmEnetPortTxErrorsThe number of outbound packets that could not be
transmitted because of errors.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.1.3.1.12 |
hzQtmAggregatedEnetPort OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.4.2 |
hzQtmAggregatedEnetPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.4.2.1 |
hzQtmEnetPortDroppedEnetFramesThresholdParametersA read-write string: The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.rw DisplayString .1.3.6.1.4.1.7262.2.4.4.2.1.1 |
hzQtmEnetPortBWUtilizationThresholdParametersA read-write string: The percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the threshold point in percent, the number of seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.rw DisplayString .1.3.6.1.4.1.7262.2.4.4.2.1.2 |
hzQtmAggregatedEnetPortStats OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.4.2.2 |
hzQtmAggPortTxFramesThe current count of aggregated port egress frames.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.1 |
hzQtmAggPortTxBytesThe current count of aggregated port egress bytes.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.2 |
hzQtmAggPortRxFramesOKThe current count of aggregated port ingress frames.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.3 |
hzQtmAggPortRxBytesOKThe current count of aggregated port ingress bytes.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.4 |
hzQtmAggPortRxFramesErrorThe current count of aggregated port ingress errors.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.5 |
hzQtmAggPortBWUtilizationThe carried load over link capacity for port.ro Integer32 .1.3.6.1.4.1.7262.2.4.4.2.2.6 |
hzQtmAggPortIngressDataRateThe data rate coming into the ethernet for port.
The data rate you see is multiplied by 100. e.g. A display
of 1530 is actually 15.30 Mpbsro Integer32 .1.3.6.1.4.1.7262.2.4.4.2.2.7 |
hzQtmAggPortEgressDataRateThe data rate going out of the ethernet for port.
The data rate you see is multiplied by 100. e.g. A display
of 1530 is actually 15.30 Mpbs.ro Integer32 .1.3.6.1.4.1.7262.2.4.4.2.2.8 |
hzQtmAggPortFramesInQueue1The current count of frames passed through queue 1.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.9 |
hzQtmAggPortFramesInQueue2The current count of frames passed through queue 2.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.10 |
hzQtmAggPortFramesInQueue3The current count of frames passed through queue 3.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.11 |
hzQtmAggPortFramesInQueue4The current count of frames passed through queue 4.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.12 |
hzQtmAggPortFramesInQueue1DiscardedThe current count of frames received in queue 1 that were discarded due to an error.
One possible reason is lack of buffer space.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.13 |
hzQtmAggPortFramesInQueue2DiscardedThe current count of frames received in queue 2 that were discarded due to an error.
One possible reason is lack of buffer space.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.14 |
hzQtmAggPortFramesInQueue3DiscardedThe current count of frames received in queue 3 that were discarded due to an error.
One possible reason is lack of buffer space.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.15 |
hzQtmAggPortFramesInQueue4DiscardedThe current count of frames received in queue 4 that were discarded due to an error.
One possible reason is lack of buffer space.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.16 |
hzQtmAggPortFramesInQueueCThe current count of frames passed through queue C.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.17 |
hzQtmAggPortFramesInQueueCDiscardedThe current count of frames received in queue C that were discarded due to an error.
One possible reason is lack of buffer space.ro Counter64 .1.3.6.1.4.1.7262.2.4.4.2.2.18 |
hzQtmWirelessInterface OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5 |
hzQtmWirelessInterfaceNames OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.1 |
hzQtmWirelessInterfaceNameTableA table of Wireless Interface Modems SEQUENCE OF HzQtmWirelessInterfaceNameEntry .1.3.6.1.4.1.7262.2.4.5.1.1 |
hzQtmWirelessInterfaceNameEntryA Wireless Interface Modem HzQtmWirelessInterfaceNameEntry .1.3.6.1.4.1.7262.2.4.5.1.1.1 |
hzQtmWirelessInterfaceNameIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.1.1.1.1 |
hzQtmWirelessInterfaceNameDescribes the functionality of the Wireless Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.1.1.1.2 |
hzQtmWirelessInterfaceModems OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.2 |
hzQtmModemTableA table of Wireless Interface Modems SEQUENCE OF HzQtmModemEntry .1.3.6.1.4.1.7262.2.4.5.2.1 |
hzQtmModemEntryA Wireless Interface Modem HzQtmModemEntry .1.3.6.1.4.1.7262.2.4.5.2.1.1 |
hzQtmModemIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.2.1.1.1 |
hzQtmModemOperStatusThe current operational state of the interface. Testing indicates that no operational packets can be passed.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.2.1.1.2 |
hzQtmModemChannelizedRSLAn estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually -35.2dBmro Integer32 .1.3.6.1.4.1.7262.2.4.5.2.1.1.3 |
hzQtmModemChannelizedRSLUnsignedIntThe absolute value of the estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually 35.2dBmro Integer32 .1.3.6.1.4.1.7262.2.4.5.2.1.1.4 |
hzQtmModemModulationTypeThe modulation type of the modem, distinguished according
to the physical/link protocol.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.2.1.1.5 |
hzQtmModemRxSpeedAn estimate of the modem's current Rx bandwidth in bits per
second. Divide the value by 10000 to get the actual data rate in Mbpsro Integer32 .1.3.6.1.4.1.7262.2.4.5.2.1.1.6 |
hzQtmModemTxSpeedAn estimate of the modem's current Tx bandwidth in bits per
second. Divide the value by 10000 to get the actual data rate in Mbpsro Integer32 .1.3.6.1.4.1.7262.2.4.5.2.1.1.7 |
hzQtmModemSNRSNR value in dB. Divide the value by 10 to get the actual SNR.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.2.1.1.8 |
hzQtmModemEbToNoiseRatioThe ratio of the modem Estimated Energy per information bit to Noise power spectral density.
Divide the value by 10 to get the actual EbToNoiseRatioro Integer32 .1.3.6.1.4.1.7262.2.4.5.2.1.1.9 |
hzQtmModemEqualizerStressIndicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.2.1.1.10 |
hzQtmModemSNRThresholdParametersA read-write string specifing the modem SNR threshold.rw DisplayString .1.3.6.1.4.1.7262.2.4.5.2.1.1.11 |
hzQtmModemChannelizedRslBelowThresholdParametersA read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dBm, the second is the time in seconds that the threshold must be exceeded. In this example the threshold -75 dBm and the time is set to 10 seconds. The single quote marks i.e. ' ' are not used in the command.rw DisplayString .1.3.6.1.4.1.7262.2.4.5.2.1.1.12 |
hzQtmModemXpicEqualizerStressIndicates the average magnitude of all the XPIC equalizer taps to provide a measure of how hard the XPIC equalizer is working.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.2.1.1.13 |
hzQtmModemXPIThe XPI is a measure of the cross-polarization distortion (interference) (named XPD or XPI) with reference to the main received signal level.
XPI is calculated as a ratio of XPIC_equalizer_stress to (Main_equalizer_stress + 512). This value is converted to dB by using the
formula 20*log( XPIC_equalizer_stress / (Main_equalizer_stress + 512)) . Divide the value by 100 to get the actual RSL value.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.2.1.1.14 |
hzQtmModemStatsTableA table of Wireless Interface Modem Statistics SEQUENCE OF HzQtmModemStatsEntry .1.3.6.1.4.1.7262.2.4.5.2.2 |
hzQtmModemStatsEntryStatistics for a Wireless Interface Modem HzQtmModemStatsEntry .1.3.6.1.4.1.7262.2.4.5.2.2.1 |
hzQtmModemStatsIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.2.2.1.1 |
hzQtmModemTxBlocksThe current count of Modem blocks transmitted.ro Counter64 .1.3.6.1.4.1.7262.2.4.5.2.2.1.2 |
hzQtmModemRxBlocksOKsThe current count of Modem blocks received.ro Counter64 .1.3.6.1.4.1.7262.2.4.5.2.2.1.3 |
hzQtmModemRxBlocksErrorsThe current count of Modem blocks received in error.ro Counter64 .1.3.6.1.4.1.7262.2.4.5.2.2.1.4 |
hzQtmWirelessEnetPortStatsTable SEQUENCE OF HzQtmWirelessEnetPortStatsEntry .1.3.6.1.4.1.7262.2.4.5.2.3 |
hzQtmWirelessEnetPortStatsEntry HzQtmWirelessEnetPortStatsEntry .1.3.6.1.4.1.7262.2.4.5.2.3.1 |
hzQtmWirelessEnetPortIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.2.3.1.1 |
hzQtmWirelessEnetPortTxFramesThe current count of Ethernet Combiner frames sent.ro Counter64 .1.3.6.1.4.1.7262.2.4.5.2.3.1.2 |
hzQtmWirelessEnetPortRxFramesOKThe current count of good Ethernet Combiner frames received.ro Counter64 .1.3.6.1.4.1.7262.2.4.5.2.3.1.3 |
hzQtmWirelessEnetPortRxFramesErrorsThe current count of Ethernet Combiner frames received in error.ro Counter64 .1.3.6.1.4.1.7262.2.4.5.2.3.1.4 |
hzQtmWirelessEnetPortRxFramesQueueDiscardsThe current count of Ethernet Combiner frames in the queue that were discarded.ro Counter64 .1.3.6.1.4.1.7262.2.4.5.2.3.1.5 |
hzQtmWirelessInterfaceIF OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.3 |
hzQtmIntermediateFrequencyTableA table of Intermediate Frequency pat(pliu) SEQUENCE OF HzQtmIntermediateFrequencyEntry .1.3.6.1.4.1.7262.2.4.5.3.1 |
hzQtmIntermediateFrequencyEntryIntermediate Frequency Card (pliu) HzQtmIntermediateFrequencyEntry .1.3.6.1.4.1.7262.2.4.5.3.1.1 |
hzQtmIFPathIndexA unique value for each path.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.3.1.1.1 |
hzQtmIFPathTxLockStatusIndicates if the IF transmit synthesizer is locked.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.3.1.1.2 |
hzQtmIFPathRxLockStatusIndicates if the IF receive synthesizer is locked.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.3.1.1.3 |
hzQtmIFPathLoopbackLockStatusIndicates if the IF loopback synthesizer is locked.
The loopback synthesize is used only when the IF loopback is enabled.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.3.1.1.4 |
hzQtmWirelessInterfaceRadios OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.4 |
hzQtmRadioTableA table of Wireless Interface Radios SEQUENCE OF HzQtmRadioEntry .1.3.6.1.4.1.7262.2.4.5.4.1 |
hzQtmRadioEntryA Wireless Interface Radio HzQtmRadioEntry .1.3.6.1.4.1.7262.2.4.5.4.1.1 |
hzQtmRadioIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.4.1.1.1 |
hzQtmRadioDescriptionA textual string containing information about the radio. Includes the
manufacturer, product name, software version, serial number, and hardware
version of the radio.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.4.1.1.2 |
hzQtmRadioOperStatusThe current operational state of the interface. Testing
indicates that no operational packets can be passed. Testing
also indicates that a firmware upgrade may be in progressro Enumeration .1.3.6.1.4.1.7262.2.4.5.4.1.1.3 |
hzQtmRadioLastChangedThe value of sysUpTime at the time the radio entered its current
operational state. If the current state was entered prior to the
last re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7262.2.4.5.4.1.1.4 |
hzQtmRadioReceiveSignalLevelThe Received Signal Level indicates the power of the receive level
in dBm. The number is divided by 10 to get the actual dBm. For example,
-432 is actually -43.2dBm.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.4.1.1.5 |
hzQtmRadioReceiveSignalLevelUnsignedThe Received Signal Level indicates the power of the receive level in dBm.
The number is divided by -10. e.g. 432 is actually -43.2dBm. Object provided
to accomodate plotting of negative RSL values which is not supported
in some EMS (i.e.: CastleRock). Please use 'hzQtmRadioReceiveSignalLevel'
object if your EMS supports plotting of negative integers.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.4.1.1.6 |
hzQtmRadioTxGainThe gain of the radio in the transmit chain. Indicates the gain in dB.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.4.1.1.7 |
hzQtmRadioRxGainThe gain of the radio in the receive chain. Indicates the gain in dB.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.4.1.1.8 |
hzQtmRadioResetWriting 1 to this object causes the radio to be reset. All other values
are not recognized. This variable always reads back as 0. radioOperStatus
should be polled by the user after this object is written to, to verify
that the radio card has been reset.rw Integer32 .1.3.6.1.4.1.7262.2.4.5.4.1.1.9 |
hzQtmRadioTransmitPowerdBmThis defines the programmed transmit level of the radio.
The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm.
Notes:
- Programmed and Actual transmit power may differ - see hzQtmRadioActualTransmitPower.rw Integer32 .1.3.6.1.4.1.7262.2.4.5.4.1.1.10 |
hzQtmRadioPowerOptionThis indicates the power option of the radio: normal or high power.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.4.1.1.11 |
hzQtmRadioTxStateThis indicates the power option of the radio: normal or high power.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.4.1.1.12 |
hzQtmRadioActualTxStateThis defines the actual transmit state of the radio.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.4.1.1.13 |
hzQtmRadioTemperatureThe Radio temperature in degree Celsius. The actual temperature is determined by dividing the number by 10. e.g. 202 is actually 20.2 degrees Celsius.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.4.1.1.14 |
hzQtmRadioRxCableLossThe Rx Cable Loss in dB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.4.1.1.15 |
hzQtmRadioTxCableLossThe Tx Cable Loss in dB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.4.1.1.16 |
hzQtmRadioTxCableLossChangeThe Tx Cable Loss Change is the difference between the configured TxPower and the measured TxPower measured in dB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.4.1.1.17 |
hzQtmRadioMaxTransmitPowerdBmThe maximum Transmit Power allowed.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.4.1.1.18 |
hzQtmRadioActualTransmitPowerdBmThis defines the actual transmit level of the radio.
The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm.
This value will be undefined:
- If the radio is operational and muted.
- If the radio is not operational.
- If the radio does not have transmit calibration tables programmed into its EEPROM, this transmit power level cannot be used as it is not possible to accurately calculate the actual transmit level. In this case this object will return -99.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.4.1.1.19 |
hzQtmWirelessInterfaceRadioFrequencies OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.5 |
hzQtmWirelessInterfaceRadio1Frequencies OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.5.1 |
hzQtmRadio1FreqGroupSelectedThe frequency group selected for Radio 1.
The frequency subbands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHighrw Enumeration .1.3.6.1.4.1.7262.2.4.5.5.1.1 |
hzQtmRadio1BandTableA table of radio bands for Radio 1. Frequency bands are divided into sub bands.
i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and
fcc23d which make up the entire FCC23 band SEQUENCE OF HzQtmRadio1BandEntry .1.3.6.1.4.1.7262.2.4.5.5.1.2 |
hzQtmRadio1BandEntryA radio band entry containing all the radio band values HzQtmRadio1BandEntry .1.3.6.1.4.1.7262.2.4.5.5.1.2.1 |
hzQtmRadio1BandIndexA unique value for each radio band.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.2.1.1 |
hzQtmRadio1BandIdradio band ID.
Note: Changing radio band ID requires a system reset.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.2.1.2 |
hzQtmRadio1BandNameThe radio band name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.5.1.2.1.3 |
hzQtmRadio1BandProgrammedSpecifies the operating radio band for the modem.
***Only 1 index may be selected in a 1 modem system.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.5.1.2.1.4 |
hzQtmRadio1TxHighFreqTableA table of txHigh frequency settings for Radio 1 SEQUENCE OF HzQtmRadio1TxHighFreqEntry .1.3.6.1.4.1.7262.2.4.5.5.1.3 |
hzQtmRadio1TxHighFreqEntryA txHighFrequency entry containing all the frequency values HzQtmRadio1TxHighFreqEntry .1.3.6.1.4.1.7262.2.4.5.5.1.3.1 |
hzQtmRadio1TxHighFreqIndexA unique value for each frequency channel.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.3.1.1 |
hzQtmRadio1TxHighFreqChannelIndexThe channel index for the frequency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.5.1.3.1.2 |
hzQtmRadio1TxHighFreqTransmitRfFrequencyThe RF TX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.3.1.3 |
hzQtmRadio1TxHighFreqReceiveRfFrequencyThe RF RX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.3.1.4 |
hzQtmRadio1TxHighFreqProgrammedSpecifies the operating frequency channel for the modem.
Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Master unit.
***Only 1 index may be selected in a 1 modem system.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.5.1.3.1.5 |
hzQtmRadio1TxLowFreqTableA table of txLow frequency settings for Radio 1 SEQUENCE OF HzQtmRadio1TxLowFreqEntry .1.3.6.1.4.1.7262.2.4.5.5.1.4 |
hzQtmRadio1TxLowFreqEntryA hzQtmTxLowFrequeny entry containing the frequency values for a specific index HzQtmRadio1TxLowFreqEntry .1.3.6.1.4.1.7262.2.4.5.5.1.4.1 |
hzQtmRadio1TxLowFreqIndexA unique value for each frequency channel.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.4.1.1 |
hzQtmRadio1TxLowFreqChannelIndexThe channel index for the frequency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.5.1.4.1.2 |
hzQtmRadio1TxLowFreqTransmitRfFrequencyThe RF TX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.4.1.3 |
hzQtmRadio1TxLowFreqReceiveRfFrequencyThe RF RX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.4.1.4 |
hzQtmRadio1TxLowFreqProgrammedSpecifies the operating frequency channel for the modem.
Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Master unit.
Notes:
Only 1 index may be selected in a 1 modem system.
Changing Programmed Frequency requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.5.1.4.1.5 |
hzQtmRadio1ProgrammedFrequency OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.5.1.5 |
hzQtmRadio1ProgrammedFrequencyChannelThe channel that has been programmed for Radio 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.5.1.5.1 |
hzQtmRadio1ProgrammedFrequencyTxRfThe programmed RF TX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.5.2 |
hzQtmRadio1ProgrammedFrequencyRxRfThe RF RX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.1.5.3 |
hzQtmWirelessInterfaceRadio2Frequencies OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.5.2 |
hzQtmRadio2FreqGroupSelectedThe frequency group selected for Radio 2.
The frequency subbands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHighro Enumeration .1.3.6.1.4.1.7262.2.4.5.5.2.1 |
hzQtmRadio2BandTableA table of Radio Bands for Radio 2 SEQUENCE OF HzQtmRadio2BandEntry .1.3.6.1.4.1.7262.2.4.5.5.2.2 |
hzQtmRadio2BandEntryA table of radio bands for Radio 2. Frequency bands are divided into sub bands.
i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and
fcc23d which make up the entire FCC23 band HzQtmRadio2BandEntry .1.3.6.1.4.1.7262.2.4.5.5.2.2.1 |
hzQtmRadio2BandIndexA unique value for each radio band.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.2.1.1 |
hzQtmRadio2BandIdRadio band ID.
Note: Changing radio band ID requires a system reset.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.2.1.2 |
hzQtmRadio2BandNameThe radio band name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.5.2.2.1.3 |
hzQtmRadio2BandProgrammedSpecifies the operating radio band for the modem.
***Only 1 index may be selected in a 1 modem system.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.5.2.2.1.4 |
hzQtmRadio2TxHighFreqTableA table of txHigh frequency settings for Radio 2 SEQUENCE OF HzQtmRadio2TxHighFreqEntry .1.3.6.1.4.1.7262.2.4.5.5.2.3 |
hzQtmRadio2TxHighFreqEntryA txHighFrequency entry containing all the frequency values HzQtmRadio2TxHighFreqEntry .1.3.6.1.4.1.7262.2.4.5.5.2.3.1 |
hzQtmRadio2TxHighFreqIndexA unique value for each frequency channel.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.3.1.1 |
hzQtmRadio2TxHighFreqChannelIndexThe channel index for the frequency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.5.2.3.1.2 |
hzQtmRadio2TxHighFreqTransmitRfFrequencyThe RF TX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.3.1.3 |
hzQtmRadio2TxHighFreqReceiveRfFrequencyThe RF RX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.3.1.4 |
hzQtmRadio2TxHighFreqProgrammedSpecifies the operating frequency channel for the modem.
Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Slave unit.
Notes:
Only 1 index may be selected in a 1 modem system.
Changing Programmed Frequency requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.5.2.3.1.5 |
hzQtmRadio2TxLowFreqTableA table of txLow frequency settings for Radio 2 SEQUENCE OF HzQtmRadio2TxLowFreqEntry .1.3.6.1.4.1.7262.2.4.5.5.2.4 |
hzQtmRadio2TxLowFreqEntryA hzQtmTxLowFrequeny entry containing the frequency values for a specific index HzQtmRadio2TxLowFreqEntry .1.3.6.1.4.1.7262.2.4.5.5.2.4.1 |
hzQtmRadio2TxLowFreqIndexA unique value for each frequency channel.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.4.1.1 |
hzQtmRadio2TxLowFreqChannelIndexThe channel index for the frequency.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.5.2.4.1.2 |
hzQtmRadio2TxLowFreqTransmitRfFrequencyThe RF TX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.4.1.3 |
hzQtmRadio2TxLowFreqReceiveRfFrequencyThe RF RX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.4.1.4 |
hzQtmRadio2TxLowFreqProgrammedSpecifies the operating frequency channel for the modem.
Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Slave unit.
Notes:
Only 1 index may be selected in a 1 modem system.
Changing Programmed Frequency requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.5.2.4.1.5 |
hzQtmRadio2ProgrammedFrequency OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.5.2.5 |
hzQtmRadio2ProgrammedFrequencyChannelThe channel that has been programmed for Radio 2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.5.2.5.1 |
hzQtmRadio2ProgrammedFrequencyTxRfThe programmed RF TX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.5.2 |
hzQtmRadio2ProgrammedFrequencyRxRfThe RF RX frequency in KHz.ro Integer32 .1.3.6.1.4.1.7262.2.4.5.5.2.5.3 |
hzQtmWirelessInterfaceAntenna OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.6 |
hzQtmAntennaDiameterThis defines the diameter of the antenna represented in inches.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.6.1 |
hzQtmAntenna1TiltThis defines the position of the antenna for radio 1.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.6.2 |
hzQtmAntenna2TiltThis defines the position of the antenna for radio 2.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.6.3 |
hzQtmWirelessInterfaceRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.7 |
hzQtmWirelessInterfaceRedundancyActiveWirelessPortThis attribute indicates the active wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy.ro Enumeration .1.3.6.1.4.1.7262.2.4.5.7.1 |
hzQtmWirelessInterfaceRedundancyPrimaryWirelessPortThis attribute indicates the primary wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy. The primary wireless port indicates which wireless port is connected to the 'primary' port on the RDRM coupler.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.7.2 |
hzQtmWirelessInterfaceRedundancySwitchingAlgorithmThis attribute selects the rule that will determine when a redundant path switch will take place. There are two options: manual and algorithm-based. The 'Manual' option turns off the automatic path switching feature. Only an operator can switch the active path.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.7.3 |
hzQtmWirelessInterfaceRedundancySwitchCauseThis string indicates the reason that a redundancy switch has occurred. If the active port is the primary port then this string is empty.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.7.4 |
hzQtmWirelessInterfaceRedundancyRemoveFaultyThis object removes the specified port from the faulty port list.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.7.5 |
hzQtmWirelessInterfaceRedundancyDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.7.6 |
hzQtmWirelessInterfaceRedundancyDiagnoseThis write-only object will diagnose problems with switching paths. Write diagnose (1) to this object and check results in hzQtmWirelessInterfaceRedundancyDiagnosticResult objectrw Enumeration .1.3.6.1.4.1.7262.2.4.5.7.6.1 |
hzQtmWirelessInterfaceRedundancyDiagnosticResultThe result from Redundancy Diagnostic is read from this object. Note that the diagnostic result presented in this object is private to SNMP initiated diagnostics. If a diagnostic is initiated from the CLI or WEB, this result will remain unchanged.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.7.6.2 |
hzQtmWirelessInterfaceRedundancyRadioSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.5.7.7 |
hzQtmWirelessInterfaceRedundancySwitchRadioThis write-only object will switch radio redunancy. Write switch (1) to this object and check results in hzQtmWirelessInterfaceRedundancySwitchRadioResult object.rw Enumeration .1.3.6.1.4.1.7262.2.4.5.7.7.1 |
hzQtmWirelessInterfaceRedundancySwitchRadioResultThe Switch Radio result is presented in this object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.5.7.7.2 |
hzQtmCalendar OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.6 |
hzQtmDateA string in the format as follows:
XX/YY/ZZ
Where XX = day of month (range 01 to 31)
YY = month of year(range 01 to 12)
ZZ = year (range 01 - 99)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.6.1 |
hzQtmTimeA string in the format as follows:
aa:bb:cc.ddd
Where aa = hour of day ( range 00 to 23 )
bb = minute of hour ( range 00 to 59 )
cc = second of minute( range 00 to 59 )
ddd = thousandths of second (range 000 to 999)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.6.2 |
hzQtmAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.7 |
hzQtmClearAlarmCountersClears the alarm counters for the specified grouprw Enumeration .1.3.6.1.4.1.7262.2.4.7.1 |
hzQtmSystemAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.7.2 |
hzQtmExplicitAuthenticationFailureAlarmAuthentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.1 |
hzQtmExplicitAuthenticationFailureCountsIndicates the number of times explicit authentication has failed.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.2 |
hzQtmHitlessAamConfigMismatchAlarmIn the near end Hitless Automatic Adaptive Modulation (HAAM) feature set to on and in peer it is set to offro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.3 |
hzQtmHitlessAamConfigMismatchCountsIndicates the approximate number of seconds Hitless AAM Configuration Mismatch alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.4 |
hzQtmHitlessAamActiveAlarmIndicates Hitless AAM is active and system running on lower modulationro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.5 |
hzQtmHitlessAamActiveCountsIndicates the approximate number of seconds Hitless AAM Active alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.6 |
hzQtmSntpServerUnreachableAlarmAll of the SNTP servers are not available.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.7 |
hzQtmSntpServerUnreachableCountsIndicates how long in seconds all of the SNTP servers are not available.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.8 |
hzQtmFrequencyFileInvalidAlarmExecuting frequency file is invalid.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.9 |
hzQtmFrequencyFileInvalidCountsIndicates the time (in secs) since this alarm exist.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.10 |
hzQtmFanFailureAlarmIndicates whether any of the two Fans have failed.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.11 |
hzQtmFanFailureCountsIndicates the number of seconds that the fan has failed for.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.12 |
hzQtmRedundancyPrimaryPortNotSetAlarmThe redundancy primary port used for redundancy has not been set.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.13 |
hzQtmRedundancyPrimaryPortNotSetCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.14 |
hzQtmRedundancySecondaryPortActiveAlarmThe active wireless port has switched to the secondary wireless port.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.15 |
hzQtmRedundancySecondaryPortActiveCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.16 |
hzQtmRedundancyPrimaryPortFaultyAlarmThe redundancy primary wireless port is faulty.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.17 |
hzQtmRedundancyPrimaryPortFaultyCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.18 |
hzQtmRedundancySecondaryPortFaultyAlarmThe redundancy secondary wireless port is faulty.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.19 |
hzQtmRedundancySecondaryPortFaultyCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.20 |
hzQtmAtpcConfigMismatchAlarmIn the near end ATPC feature is set to on and in peer it is set to off.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.21 |
hzQtmAtpcConfigMismatchCountsIndicates the approximate number of seconds AtpcConfigMismatch alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.22 |
hzQtmDroppedEnetFramesThresholdAlarmThe threshold for number of frames dropped has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.23 |
hzQtmDroppedEnetFramesThresholdCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter32 .1.3.6.1.4.1.7262.2.4.7.2.24 |
hzQtmBandwidthUtilizationThresholdAlarmThe threshold for the percentage of available bandwidth has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.25 |
hzQtmBandwidthUtilizationThresholdCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter32 .1.3.6.1.4.1.7262.2.4.7.2.26 |
hzQtmRlsMismatchAlarmRLS configurations on the pair of systems are mismatched.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.27 |
hzQtmRlsMismatchCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter32 .1.3.6.1.4.1.7262.2.4.7.2.28 |
hzQtmRLSQueueBasedShutdownActivatedAlarmRLS Queue-Based shutdown is activated.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.29 |
hzQtmRLSQueueBasedShutdownActivatedCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter32 .1.3.6.1.4.1.7262.2.4.7.2.30 |
hzQtmFpgaProgrammingErrorAlarmEncountered some problem while programming the modem.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.31 |
hzQtmFpgaProgrammingErrorCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.32 |
hzQtmMibChangeNotSavedAlarmThe system has automatically re-programmed the mib. It requires a save mib action to save the changes to flash, otherwise the changes will be lost on reset.
View the logs to see what was modified in the mib.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.33 |
hzQtmMibChangeNotSavedCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.34 |
hzQtmBadSystemConfigurationAlarmThe system has been configured incorrectly. Check the logs or use the CLI get alarms to isolate the cause.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.35 |
hzQtmBadSystemConfigurationCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.36 |
hzQtmPartnerNodeAlarmFailed to establish communication or configuration mismatch with the partner node. Check the logs or use the CLI get alarms to isolate the cause.sro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.37 |
hzQtmPartnerNodeAlarmCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.38 |
hzQtmBandwidthDoublingInvalidLinkConfigAlarmBandwidth doubling link is configured wong. i.e., Primary is synchronized with remote primary, and secondary is sychronized with remote secondary.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.39 |
hzQtmBandwidthDoublingInvalidLinkConfigCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.40 |
hzQtmBandwidthDoublingWrongPortConnectedAlarmBandwidth doubling wrong port is connected to local partner.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.41 |
hzQtmBandwidthDoublingWrongPortConnectedCountIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.42 |
hzQtmSynceLostLockAlarmSyncE feature is currently out of lock.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.43 |
hzQtmSynceLostLockCountIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.44 |
hzQtmSynceSecondarySourceInUseAlarmSyncE feature is synchronized to secondary clock source.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.2.45 |
hzQtmSynceSecondarySourceInUseCountIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.2.46 |
hzQtmNetworkInterfaceAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.7.3 |
hzQtmEnetPortAlarmsTable SEQUENCE OF HzQtmEnetPortAlarmsEntry .1.3.6.1.4.1.7262.2.4.7.3.1 |
hzQtmEnetPortAlarmsEntry HzQtmEnetPortAlarmsEntry .1.3.6.1.4.1.7262.2.4.7.3.1.1 |
hzQtmEnetPortAlarmsIndexro Enumeration .1.3.6.1.4.1.7262.2.4.7.3.1.1.1 |
hzQtmEnetPortEthernetLinkDownAlarmIndicates whether the Ethernet link is down or not. The severity is major, the probable cause is an incorrect configuration of the switch or router connected to horizon. The recommended course of action is to check the connection.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.3.1.1.2 |
hzQtmEnetPortEthernetLinkDownCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter32 .1.3.6.1.4.1.7262.2.4.7.3.1.1.3 |
hzQtmWirelessInterfaceAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.7.4 |
hzQtmModemAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.7.4.1 |
hzQtmModemAlarmsTableA table of Modem Alarms. SEQUENCE OF HzQtmModemAlarmsEntry .1.3.6.1.4.1.7262.2.4.7.4.1.1 |
hzQtmModemAlarmsEntryModem Alarms HzQtmModemAlarmsEntry .1.3.6.1.4.1.7262.2.4.7.4.1.1.1 |
hzQtmModemAlarmsIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1 |
hzQtmModemRxLossOfSignalAlarmLoss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.2 |
hzQtmModemRxLossOfSignalCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.3 |
hzQtmModemTxLossOfSyncAlarmLoss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course of action is to check the line of site between the horizon nodes.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.4 |
hzQtmModemTxLossOfSyncCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.5 |
hzQtmModemSnrBelowThresholdAlarmThe demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the horizon nodes.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.6 |
hzQtmModemSnrBelowThresholdCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.7 |
hzQtmModemEqualizerStressExceedThresholdAlarmEqualizer Stress measured within the demodulator exceeds the threshold value.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.8 |
hzQtmModemEquilizerStressExceedThresholdCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.9 |
hzQtmModemRLSShutdownActivatedAlarmRLS shutdown is activated.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.10 |
hzQtmModemRLSShutdownActivatedCountsIndicates the approximate time, in seconds, that this alarm has been in the active statero Counter32 .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.11 |
hzQtmModemXPICEquStressExceedThresholdAlarmXPIC Equalizer Stress measured within the demodulator exceeds the threshold value.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.12 |
hzQtmModemXPICEquStressExceedThresholdCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.1.1.1.13 |
hzQtmRadioAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.7.4.2 |
hzQtmRadioAlarmsTableA table of Radio Alarms. SEQUENCE OF HzQtmRadioAlarmsEntry .1.3.6.1.4.1.7262.2.4.7.4.2.1 |
hzQtmRadioAlarmsEntryRadio Alarms HzQtmRadioAlarmsEntry .1.3.6.1.4.1.7262.2.4.7.4.2.1.1 |
hzQtmRadioAlarmsIndexA unique value for each radio interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1 |
hzQtmRadioSynthLostLockAlarmThe radio synthesizer has lost lock. The severity is critical, the probable cause is a faulty radio and recommended course of action is to replace the radio unit.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.2 |
hzQtmRadioSynthLostLockCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.3 |
hzQtmRadioLostCommunicationAlarmRS232 communication lost between IDU and the radio. The severity is critical, the probable cause is a faulty cable between the modem and radio, and recommended course of action is to check the connection.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.4 |
hzQtmRadioLostCommunicationCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.5 |
hzQtmRadioMismatchAlarmThe radio connected to the IDU modem does not match the frequency programmed into the modem unit. The severity is major, the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the modem, and recommended course of action is to check the modem frequency settings and radio hardware version number or serial number.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.6 |
hzQtmRadioMismatchCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.7 |
hzQtmRadioPowerAmpAlarmThe power amplifier on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.8 |
hzQtmRadioPowerAmpCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.9 |
hzQtmRadioExcessiveTxCableLossAlarmro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.10 |
hzQtmRadioExcessiveTxCableLossCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.11 |
hzQtmRadioRslBelowThresholdAlarmThe minimum radio receive signal level threshold has been crossed. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the air pair nodes.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.12 |
hzQtmRadioRslBelowThresholdCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.13 |
hzQtmRadioHighPowerTxDetectorAlarmThis applies to High Power Radios only. Indicates minimum power threshold has not been surpassed.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.14 |
hzQtmRadioHighPowerTxDetectorCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.15 |
hzQtmRadioRedundancySerialNumMismatchAlarmThe radio serial number programmed in flash and radio do not match.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.16 |
hzQtmRadioRedundancySerialNumMismatchCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.17 |
hzQtmRadioExcessiveTxCableLossChangeAlarmCable loss change exceeds the threshold.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.18 |
hzQtmRadioExcessiveTxCableLossChangeCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.19 |
hzQtmRadioExcessiveRxCableLossAlarmRx gain can not be adjusted to desired value.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.20 |
hzQtmRadioExcessiveRxCableLossCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.21 |
hzQtmRadioAtpcTxAtMaxPowerAlarmATPC auto-disabled (transmitting at coordinated power).ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.22 |
hzQtmRadioAtpcTxAtMaxPowerCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.23 |
hzQtmRadioSwDownloadFailedAlarmRadio is failing to download the software on startup.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.24 |
hzQtmRadioSwDownloadFailedCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.25 |
hzQtmRadioDrainCurrentAlarmThe drain current on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.26 |
hzQtmRadioDrainCurrentCountsro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.27 |
hzQtmRadioPowerOffAlarmRadio power is off (potential IF cable short detection).ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.28 |
hzQtmRadioPowerOffCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.2.1.1.29 |
hzQtmIFAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.7.4.3 |
hzQtmIFAlarmsTableA table of IF Alarms. SEQUENCE OF HzQtmIFAlarmsEntry .1.3.6.1.4.1.7262.2.4.7.4.3.1 |
hzQtmIFAlarmsEntryIF Alarms HzQtmIFAlarmsEntry .1.3.6.1.4.1.7262.2.4.7.4.3.1.1 |
hzQtmIFAlarmsIndexA unique value for each IF path.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.3.1.1.1 |
hzQtmIFLostLockAlarmThe IF synthesizer has lost lock.ro Enumeration .1.3.6.1.4.1.7262.2.4.7.4.3.1.1.2 |
hzQtmIFLostLockCountsIndicates the approximate number of seconds that this alarm has been active.ro Counter32 .1.3.6.1.4.1.7262.2.4.7.4.3.1.1.3 |
hzQtmTrapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.8 |
hzQtmSnmpTrapHostTableTable containing SNMP trap host entries. SEQUENCE OF HzQtmSnmpTrapHostEntry .1.3.6.1.4.1.7262.2.4.8.1 |
hzQtmSnmpTrapHostEntryThe snmp trap host entry containing all the trap host information HzQtmSnmpTrapHostEntry .1.3.6.1.4.1.7262.2.4.8.1.1 |
hzQtmSnmpTrapHostIndexA unique value for each trap host.ro Integer32 .1.3.6.1.4.1.7262.2.4.8.1.1.1 |
hzQtmSnmpTrapHostModeIndicates how the snmp trap host is obtained for the system.ro Enumeration .1.3.6.1.4.1.7262.2.4.8.1.1.2 |
hzQtmSnmpTrapHostIpAddressIndicates snmp trap host IP address.ro IpAddress .1.3.6.1.4.1.7262.2.4.8.1.1.3 |
hzQtmSnmpTrapHostCommunityNameThe community string name used in Traps.ro DisplayString .1.3.6.1.4.1.7262.2.4.8.1.1.4 |
hzQtmSnmpTrapHostActivatedSpecifies whether traps are to be sent to this specific host or notro Enumeration .1.3.6.1.4.1.7262.2.4.8.1.1.5 |
hzQtmSnmpV3TrapHostsTableTable containing snmp V3 trap host entries SEQUENCE OF HzQtmSnmpV3TrapHostsEntry .1.3.6.1.4.1.7262.2.4.8.2 |
hzQtmSnmpV3TrapHostsEntryContains the snmp v3 trap host information HzQtmSnmpV3TrapHostsEntry .1.3.6.1.4.1.7262.2.4.8.2.1 |
hzQtmSnmpV3TrapHostsIndexA unique value for each v3 trap host.ro Integer32 .1.3.6.1.4.1.7262.2.4.8.2.1.1 |
snmpV3TrapHostIpAddressIndicates snmp trap host IP address.ro IpAddress .1.3.6.1.4.1.7262.2.4.8.2.1.2 |
snmpV3TrapHostUserNameThe user name of the v3 trap host.ro DisplayString .1.3.6.1.4.1.7262.2.4.8.2.1.3 |
snmpV3TrapHostAuthProtocolThe authentication alogorithm used by the v3 trap host.ro Enumeration .1.3.6.1.4.1.7262.2.4.8.2.1.4 |
snmpV3TrapHostAuthPasswordThe authentication password of the v3 trap host.ro DisplayString .1.3.6.1.4.1.7262.2.4.8.2.1.5 |
snmpV3TrapHostPrivProtocolThe privacy encryption alogorithm used by the v3 trap host.ro Enumeration .1.3.6.1.4.1.7262.2.4.8.2.1.6 |
snmpV3TrapHostPrivPasswordThe privacy password of the v3 trap host.ro DisplayString .1.3.6.1.4.1.7262.2.4.8.2.1.7 |
snmpV3TrapHostActivatedSpecifies whether a specific v3 trap host is allowed to access the systemro Enumeration .1.3.6.1.4.1.7262.2.4.8.2.1.8 |
hzQtmTrapEnable OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.8.3 |
hzQtmColdStartTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.1 |
hzQtmLinkDownTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.2 |
hzQtmLinkUpTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.3 |
hzQtmExplicitAuthenticationFailureTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.4 |
hzQtmHitlessAamConfigMismatchTrapEnables or disables the Hitless Aam ConfigMismatch trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.5 |
hzQtmHitlessAamActiveTrapEnables or disables the Hitless AAM Active trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.6 |
hzQtmAtpcConfigMismatchTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.7 |
hzQtmSntpServersUnreachableTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.8 |
hzQtmFrequencyFileInvalidTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.9 |
hzQtmEnetPortDroppedFramesThresholdExceedTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.10 |
hzQtmEnetPortBandwidthUtilizationThresholdExceedTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.11 |
hzQtmEnetPortRlsMismatchTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.12 |
hzQtmRLSQueueBasedShutdownActivatedTrapEnables or disables the Queue-Based RLS Shutdown trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.13 |
hzQtmModemRxLossOfSignalLockTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.14 |
hzQtmModemTxLossOfSyncTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.15 |
hzQtmModemSnrBelowThresholdTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.16 |
hzQtmModemEqualizerStressExceedThresholdTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.17 |
hzQtmModemChannelizedRslBelowThresholdTrapEnables or disables the trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.18 |
hzQtmFpgaProgrammingErrorTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.19 |
hzQtmUserManagementSessionCommencedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.20 |
hzQtmUserManagementSessionTerminatedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.21 |
hzQtmAtpcTxAtMaxPwrTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.22 |
hzQtmRadioSynthLostLockTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.23 |
hzQtmRadioLostCommunicationTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.24 |
hzQtmRadioMismatchTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.25 |
hzQtmRadioPowerAmpTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.26 |
hzQtmRadioExcessiveTxCableLossTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.27 |
hzQtmHiPowerRadioTxDetectorTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.28 |
hzQtmSecondaryRadioIsActiveTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.29 |
hzQtmRedundancySerialNumberMisMatchTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.30 |
hzQtmRadioFirmwareMismatchTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.31 |
hzQtmSecondaryRadioNotdetectedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.32 |
hzQtmPrimaryRadioNotdetectedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.33 |
hzQtmFaultyPrimaryRadioTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.34 |
hzQtmRadioExcessiveTxCableLossChangeTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.35 |
hzQtmRadioExcessiveRxCableLossTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.36 |
hzQtmRedundancyPrimaryPortNotSetTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.37 |
hzQtmRedundancySecondaryPortIsActiveTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.38 |
hzQtmRedundancyPrimaryPortFaultyTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.39 |
hzQtmRedundancySecondaryPortFaultyTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.40 |
hzQtmFanFailedTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.41 |
hzQtmModemRlsShutdownActivatedTrapEnables or disables the RLS Shutdown trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.42 |
hzQtmRadioUnitHwChangedTrapEnables or disables the Radio Unit Hardware changed trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.43 |
hzQtmRadioSwDownloadFailedTrapEnables or disables the Radio software download failure trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.44 |
hzQtmRadioRestartedOKTrapEnables or disables the Radio restarted OK trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.45 |
hzQtmMibChangeNotSavedTrapEnables or disables the 'Mib changed not saved' trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.46 |
hzQtmRadioDrainCurrentTrapEnables or disables the Radio Drain Current trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.47 |
hzQtmIFLostLockTrapEnables or disables the 'IF Synthesizer Lost Lock' trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.48 |
hzQtmInvalidSystemConfigurationTrapEnables or disables the Invalid System Configuration trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.49 |
hzQtmHitlessAamEventTrapEnables or disables the Hitless AAM Event trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.50 |
hzQtmModemXPICEqualizerStressExceedThresholdTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.51 |
hzQtmPartnerNodeAlarmTrapEnables or disables the Partner node trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.52 |
hzQtmBandwidthDoublingInvalidLinkConfigTrapEnables or disables the bandwidth doubling invalid link configuration traprw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.53 |
hzQtmBandwidthDoublingWrongPortConnectedTrapEnables or disables the bandwidth doubling wrong link connected traprw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.54 |
hzQtmRadioPowerOffTrapSpecifies whether this trap is to be sent or not.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.55 |
hzQtmSynceLostLockTrapEnables or disables this trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.56 |
hzQtmSynceSecondarySourceInUseTrapEnables or disables this trap.rw Enumeration .1.3.6.1.4.1.7262.2.4.8.3.57 |
hzQtmSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.9 |
hzQtmSnmpUserAccessSpecifies the user access to the system. If access is set to 'explicitManagers' then only managers with ip addresses set in snmpManagersTable will be able to gain SNMP access to the system. If access is set to 'any' then any manager will be able to gain SNMP access to the systemro Enumeration .1.3.6.1.4.1.7262.2.4.9.1 |
hzQtmSnmpManagerAnyCommunityNameThe community string name used by the 'any' manager.ro DisplayString .1.3.6.1.4.1.7262.2.4.9.2 |
hzQtmSnmpSetRequestsIndicates whether SNMP SET requests are allowed.ro Enumeration .1.3.6.1.4.1.7262.2.4.9.3 |
hzQtmSnmpManagersTableTable containing snmp manager entries SEQUENCE OF HzQtmSnmpManagersEntry .1.3.6.1.4.1.7262.2.4.9.4 |
hzQtmSnmpManagersEntryContains the snmp manager information HzQtmSnmpManagersEntry .1.3.6.1.4.1.7262.2.4.9.4.1 |
hzQtmSnmpManagersIndexA unique value for each manager.ro Integer32 .1.3.6.1.4.1.7262.2.4.9.4.1.1 |
hzQtmSnmpManagerIpAddressThe IP address of the Manager.ro IpAddress .1.3.6.1.4.1.7262.2.4.9.4.1.2 |
hzQtmSnmpManagerCommunityNameThe community string name used by the manager.ro DisplayString .1.3.6.1.4.1.7262.2.4.9.4.1.3 |
hzQtmSnmpManagerActivatedSpecifies whether a specific manager is allowed to access the systemro Enumeration .1.3.6.1.4.1.7262.2.4.9.4.1.4 |
hzQtmSnmpV3ManagersTableTable containing snmp V3 manager entries SEQUENCE OF HzQtmSnmpV3ManagersEntry .1.3.6.1.4.1.7262.2.4.9.5 |
hzQtmSnmpV3ManagersEntryContains the snmp v3 manager information HzQtmSnmpV3ManagersEntry .1.3.6.1.4.1.7262.2.4.9.5.1 |
hzQtmSnmpV3ManagersIndexA unique value for each v3 manager.ro Integer32 .1.3.6.1.4.1.7262.2.4.9.5.1.1 |
hzQtmSnmpV3ManagerUserNameThe user name of the v3 Manager.ro DisplayString .1.3.6.1.4.1.7262.2.4.9.5.1.2 |
hzQtmSnmpV3ManagerAuthProtocolThe authentication alogorithm used by the v3 manager.ro Enumeration .1.3.6.1.4.1.7262.2.4.9.5.1.3 |
hzQtmSnmpV3ManagerAuthPasswordThe authentication password of the v3 Manager.ro DisplayString .1.3.6.1.4.1.7262.2.4.9.5.1.4 |
hzQtmSnmpV3ManagerPrivProtocolThe privacy encryption alogorithm used by the v3 manager.ro Enumeration .1.3.6.1.4.1.7262.2.4.9.5.1.5 |
hzQtmSnmpV3ManagerPrivPasswordThe privacy password of the v3 Manager.ro DisplayString .1.3.6.1.4.1.7262.2.4.9.5.1.6 |
hzQtmSnmpV3ManagerActivatedSpecifies whether a specific v3 manager is allowed to access the systemro Enumeration .1.3.6.1.4.1.7262.2.4.9.5.1.7 |
hzQtmManagementSessions OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.10 |
hzQtmUserSessionUserTableA table of Wireless Interface Radios SEQUENCE OF HzQtmUserSessionUserEntry .1.3.6.1.4.1.7262.2.4.10.1 |
hzQtmUserSessionUserEntryA Wireless Interface Radio HzQtmUserSessionUserEntry .1.3.6.1.4.1.7262.2.4.10.1.1 |
hzQtmUserSessionUserIndexA unique value for each user.ro Enumeration .1.3.6.1.4.1.7262.2.4.10.1.1.1 |
hzQtmUserSessionUserNameThe username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress.ro DisplayString .1.3.6.1.4.1.7262.2.4.10.1.1.2 |
hzQtmUserSessionUserConnectionTypeEither serial port connection or ethernet connection. Ethernet connection may be through any physical port(s) dedicated to management of the equipment.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.10.1.1.3 |
hzQtmUserSessionUserStateThe state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system.ro Enumeration .1.3.6.1.4.1.7262.2.4.10.1.1.4 |
hzQtmHttp OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.11 |
hzQtmHttpEnableIndicates whether HTTP is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.4.11.1 |
hzQtmHttpSecure OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.11.2 |
hzQtmHttpSecureCertificateStatusReturns the HTTPS certificate statusro DisplayString .1.3.6.1.4.1.7262.2.4.11.2.1 |
hzQtmHttpSecureAccessForAdminUsersthe HTTPS access requirement for Admin user group.rw Enumeration .1.3.6.1.4.1.7262.2.4.11.2.2 |
hzQtmHttpSecureAccessForNocUsersthe HTTPS access requirement for Noc user group.rw Enumeration .1.3.6.1.4.1.7262.2.4.11.2.3 |
hzQtmHttpSecureAccessForSuperUsersthe HTTPS access requirement for Super user group.rw Enumeration .1.3.6.1.4.1.7262.2.4.11.2.4 |
hzQtmQos OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.12 |
hzQtmQosEnableIndicates whether QOS is enabled. If disabled is selected and cos flow mapping is active on Q1, Q2 or Q3, then cos flow mapping will be disabled.rw Enumeration .1.3.6.1.4.1.7262.2.4.12.1 |
hzQtmCosTypeIndicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, or Q-in-Q outer VLAN tag.rw Enumeration .1.3.6.1.4.1.7262.2.4.12.2 |
hzQtmCosQinQiTagSets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.12.3 |
hzQtmCosQinQoTagSets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.12.4 |
hzQtmCosQueueMappingUser queue assignments for CoS values 0 to 7.
There are 4 coS queues. Their corresponding
queue numbers are 1,2, 3, where 1 is the lowest priority queue and
4 is the highest priority queue.
CoS to queue mapping example: 1 1 2 2 3 3 4 4.rw DisplayString .1.3.6.1.4.1.7262.2.4.12.5 |
hzQtmCosExpediteQueueThis sets the user queue operation mode. (a) In expedite mode,
any Queue can be assigned 100% of CIR. Queue 4 is serviced first
and queue 1 is servcied last.(b) In non expedite mode, the sum of all CIRs
must be equal to 100%. In this mode higher priority queues
will be serviced first until that queue is emptied or
the defined CIR is reached.rw Enumeration .1.3.6.1.4.1.7262.2.4.12.6 |
hzQtmCosQueueCIRCommitted Information Rate (CIR) assignments for CoS queues
1 to 4. CIR is assigned as the percentage of system current speed.
When expedite queue is enabled any queue can be assigned 100% bandwidth.
When expedite queue is disabled the sum of CIR of all queues should be 100.rw DisplayString .1.3.6.1.4.1.7262.2.4.12.7 |
hzQtmCosQueueCBSComitted Burst Size (CBS) for CoS queues 1 to 4 and queue C. CBS is the percentage
of total packet buffer size. The sum of CBS's of all 5
queues must be equal to 100. Minimum CBS assignable to any queue
is 1.rw DisplayString .1.3.6.1.4.1.7262.2.4.12.8 |
hzQtmCosDefaultValueDefault CoS value assigned to the ethernet
frames that don't have VLAN or Q-in-Q tag.rw Integer32 .1.3.6.1.4.1.7262.2.4.12.9 |
hzQtmQosPolicySets the Qos policy.rw Enumeration .1.3.6.1.4.1.7262.2.4.12.10 |
hzQtmCosWfqWeightThe weight assigned to each of the 4 cos queue. The wireless bandwidth is distributed amongst the
queues proportional to their weight.
The weights have values from 0-15, where 0 is the lowest weight and
15 is the highest weight.
Setting the Cos weight example: 1 2 3 4.rw DisplayString .1.3.6.1.4.1.7262.2.4.12.11 |
hzQtmCutThroughProcessingThis value enables or disables the cut through feature in Quantum hardware.rw Enumeration .1.3.6.1.4.1.7262.2.4.12.12 |
hzQtmCosEcfmFlowMappingSelect a queue to route ECFM frames. The mapping is only active when ECFM is disabled. If QoS is disabled then Q1, Q2 and Q3 cannot be selected.rw Enumeration .1.3.6.1.4.1.7262.2.4.12.13 |
hzQtmCosControlFlowMappingSelect a queue to route slow protocol frames (with destination mac address 0x180C200xxxx). If QoS is disabled then Q1, Q2 and Q3 cannot be selected.rw Enumeration .1.3.6.1.4.1.7262.2.4.12.14 |
hzQtmRapidLinkShutdown OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.13 |
hzQtmRlsEnableThe Rapid Link Shutdown feature: enabled or disabled.
Note: Changing this option requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.1 |
hzQtmRlsHardFaultMonitorEnable the rlsHardFaultMonitor for rapid detection of severely degrade link. When disabled
only the RLS Link Degrade Monitor is used.
Note: Changing this option requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.2 |
hzQtmRlsWirelessPortOptionanyport - If the IDU is operating with two wireless ports and any one of the wireless ports goes down disables the ethernet port.
bothports - In the above condition, this feature disables the ehternet traffic through the faulty wireless link but continuously send
ethernet traffic through the other good wireless port. If the remaining wireless port also exceeds the error thereshold, ethernet port
will be disabled
Note: Changing this option requires a system reset.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.3 |
hzQtmRlsAutomaticLinkReestablishIf this feature is enabled, the link will be automatically reestablished
If this feature is disabled, the user must explicitly use the manualReestablish object
to bring the link back uprw Enumeration .1.3.6.1.4.1.7262.2.4.13.4 |
hzQtmRlsManualLinkReestablishThis object is writeable ONLY if automaticLinkReestablish is set to disabled.
The user explicitly brings the link back up by setting this object to enabled.
The user explicitly brings the link down by setting this object to disabled.
to bring the link back uprw Enumeration .1.3.6.1.4.1.7262.2.4.13.5 |
hzQtmWriteRlsMonitorParametersToSystemThis writes RLS soft and hard fault monitor parameters to RAM
Reading this object returns '1'.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.6 |
hzQtmRlsDroppedFramesThresholdOverrideIf the Ethernet is down due to Queue-Based Rls shutdown, this will bring the ethernet back and obey the queue settings.
Reading this object returns '1'.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.7 |
hzQtmRlsDroppedFramesThresholdTableA table of RLS Queue Monitor Parameters SEQUENCE OF HzQtmRlsDroppedFramesThresholdEntry .1.3.6.1.4.1.7262.2.4.13.8 |
hzQtmRlsDroppedFramesThresholdEntryRLS Queue Parameters HzQtmRlsDroppedFramesThresholdEntry .1.3.6.1.4.1.7262.2.4.13.8.1 |
hzQtmRlsDroppedFramesThresholdIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.13.8.1.1 |
hzQtmRlsAllowedDroppedFrameRateValueMaximum allowed ethernet frame drop rate. If the average drop rate exceeds this threshold in any of the 4 queues, the Ethernet port will be shut down.
This feture is availabe only with bothports optionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.8.1.2 |
hzQtmRlsDroppedFrameMonitorPeriodThe monitoring period in seconds.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.8.1.3 |
hzQtmRlsSoftFaultMonitorTableA table of RLS Soft Fault Monitor Parameters SEQUENCE OF HzQtmRlsSoftFaultMonitorEntry .1.3.6.1.4.1.7262.2.4.13.9 |
hzQtmRlsSoftFaultMonitorEntryRLS Parameters for Soft Fault Monitoring HzQtmRlsSoftFaultMonitorEntry .1.3.6.1.4.1.7262.2.4.13.9.1 |
hzQtmRlsSoftFaultMonitorIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.13.9.1.1 |
hzQtmRlsEstablishErredFrameThresholdMaximum erred blocks, per sample, allowed for link establishment.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.9.1.2 |
hzQtmRlsShutdownErredFrameThresholdMinimum erred blocks, per sample, allowed before link shutdown.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.9.1.3 |
hzQtmRlsEstablishNumberOfSamplesMinimum number of consecutive good samples required before link is established.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.9.1.4 |
hzQtmRlsShutdownNumberOfSamplesMinimum number of consecutive erred samples before link is shutdown.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.9.1.5 |
hzQtmRlsEstablishSamplePeriodPeriod of Time, in milliseconds, for monitoring Establish Erred Frame Threshold.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.9.1.6 |
hzQtmRlsShutdownSamplePeriodPeriod of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.9.1.7 |
hzQtmRlsQuickShutdownSamplePeriodMinimum number of milliseconds required to classify samples as erred.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.9.1.8 |
hzQtmHardFaultMonitorTableA table of RLS Hard Fault Monitor Parameters SEQUENCE OF HzQtmHardFaultMonitorEntry .1.3.6.1.4.1.7262.2.4.13.10 |
hzQtmHardFaultMonitorEntryRLS Parameters for Hard Fault Monitoring HzQtmHardFaultMonitorEntry .1.3.6.1.4.1.7262.2.4.13.10.1 |
hzQtmHardFaultMonitorIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.13.10.1.1 |
hzQtmRlsHardFaultSamplePeriodThe period of time, in milliseconds, for which the
rlsFaultThreshold is applied.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.10.1.2 |
hzQtmRlsHardFaultThresholdAcceptalbe errored block rate in percentrw Integer32 .1.3.6.1.4.1.7262.2.4.13.10.1.3 |
hzQtmRlsReceiveSignalLevelMonitorTableA table of RLS RSL Monitor Parameters SEQUENCE OF HzQtmRlsReceiveSignalLevelMonitorEntry .1.3.6.1.4.1.7262.2.4.13.11 |
hzQtmRlsReceiveSignalLevelMonitorEntryRLS RSL Monitor Parameters HzQtmRlsReceiveSignalLevelMonitorEntry .1.3.6.1.4.1.7262.2.4.13.11.1 |
hzQtmRlsReceiveSignalLevelMonitorIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.13.11.1.1 |
hzQtmRlsMakeRslMonitorRslValueThe RSL threshold, in dBm. When Link is inactive and if RSL
is higher than this threshold for a desired
period, the link will become active.rw DisplayString .1.3.6.1.4.1.7262.2.4.13.11.1.2 |
hzQtmRlsMakeRslMonitorPeriodThe desired period, in seconds. When Link is inactive and if RSL
is higher than the desiredthreshold for this
period, the link will become active.rw Integer32 .1.3.6.1.4.1.7262.2.4.13.11.1.3 |
hzQtmRlsStatus OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.13.12 |
hzQtmRlsCurrentDroppedFramesTableA table of RLS Currently Observed Queue Monitor Parameters SEQUENCE OF HzQtmRlsCurrentDroppedFramesEntry .1.3.6.1.4.1.7262.2.4.13.12.1 |
hzQtmRlsCurrentDroppedFramesEntryRLS Currently Observed Queue Monitor Parameters HzQtmRlsCurrentDroppedFramesEntry .1.3.6.1.4.1.7262.2.4.13.12.1.1 |
hzQtmRlsCurrentDroppedFramesIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.13.12.1.1.1 |
hzQtmRlsCurrentDroppedFramesRateValueRLS Current Ethernet Frame drop ratero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.1.1.2 |
hzQtmRlsCurrentDroppedFrameMonitorPeriodQueue Monitoring timero Integer32 .1.3.6.1.4.1.7262.2.4.13.12.1.1.3 |
hzQtmRlsCurrentQueueStatusQueue Status - OK: drop rate is within the threshold, Activated: Exceeded the drop thresholdro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.1.1.4 |
hzQtmRlsStatusTableA table of RLS Parameters and states SEQUENCE OF HzQtmRlsStatusEntry .1.3.6.1.4.1.7262.2.4.13.12.2 |
hzQtmRlsStatusEntryRLS Parameters and states HzQtmRlsStatusEntry .1.3.6.1.4.1.7262.2.4.13.12.2.1 |
hzQtmRlsStatusIndexA unique value for each interface.ro Enumeration .1.3.6.1.4.1.7262.2.4.13.12.2.1.1 |
hzQtmRlsOptionRLS Option. On Basic: RLS enabled with base degrade monitoring;
On Advanced: RLS enabled with hard fault monitoring;
On Anyport: If any one of the wireless links exceeds the threshold Ehternet Port will be shut down
On Bothports: Both wireless links should exceed the threshold to bring the Ethernet Port down
Off: Entire RLS feature disabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.2 |
hzQtmRlsStateRapid Link Shutdown State. If the state is activated, that means
The wireless link is down for Ethernet traffic; If the state is inactivated, that means that
wireless link is up for Ethernet traffic.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.3 |
hzQtmRlsMismatchStateRLS Mismatch State. If the state is activated, that means RLS
configuration is mismatched with peer. If the state is OK,
that means RLS configuration is matched with peer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.4 |
hzQtmDegradeMonitorStateDegrade Monitor State. If the state is activated, that means
the RLS Degrade Monitor is asserting the link down. If the
state is OK, that means the RLS Degrade Monitor is asserting
the link up.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.5 |
hzQtmHardFaultMonitorStateHard Fault Monitor State. If the state is activated, that means
the Hard Fault Monitor is asserting the link down. If the state
is OK, that means the RLS Hard Fault Monitor is asserting the
link up.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.6 |
hzQtmMakeRslThresholdStateMake RSL Threshold State. If the state is not met, that means the
RLS signal level is below the threshold value. If the state is OK,
that means the RLS signal level is above the threshold value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.7 |
hzQtmPeerRlsStatePeer RLS State. If the state is activated, that means the peer has
activated RLS. If the state is OK, that means the Peer hasn't
activated RLS.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.8 |
hzQtmRadioInterfaceStateRadio Interface State. If the state is down, that means The radio
interface is not operational(muted,disconnected, not configured).
If the state is up, that means the radio interface is operational.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.9 |
hzQtmNetworkInterfaceStateNetwork Interface State. If the state is down, that means the network
interface (Ethernet/PHY) is not operational(disconnected, not
configured). If the state is up, that means the network interface
(Ethernet/PHY) is operational.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.10 |
hzQtmUserConfiguredEstablishFerUser Configured Establish Frame Error Ratio required for the
link to be restored to service, set by the user. An example
value being '1.0E-7'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.11 |
hzQtmMinimumAchievableEstablishFerMinimum achievable Frame Error Ratio required for the link to be
restored to service. An example value being '1.0E-7'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.12 |
hzQtmUserConfiguredShutdownFerUser Configured Shutdown Frame Error Ratio required for the
link to remain in-service, set by the user. An example value
being '1.0E-7'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.13 |
hzQtmMinimumAchievableShutdownFerMinimum achievable Frame Error Ratio required for the link to
remain in-service. An example value being '1.0E-7'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7262.2.4.13.12.2.1.14 |
hzQtmUserConfiguredEstablishMonitorTimeUser Configured Establish Monitor Time, in milliseconds, for
which the 'User Configured Establish FER' must be achieved
to bring link into service, set by userro Integer32 .1.3.6.1.4.1.7262.2.4.13.12.2.1.15 |
hzQtmActualEstablishMonitorTimeActual Establish Monitor Time, in milliseconds, for which the
'User Configured Establish FER'must be achieved to bring
link into service, it's a multiple of the establish sample
period required to observe the FERro Integer32 .1.3.6.1.4.1.7262.2.4.13.12.2.1.16 |
hzQtmUserConfiguredShutdownMonitorTimeUser Configured Shutdown Monitor Time, in milliseconds, for which
the 'User Configured Shutdown FER' must be met for the link to
remain in-service, set by user.ro Integer32 .1.3.6.1.4.1.7262.2.4.13.12.2.1.17 |
hzQtmActualShutdownMonitorTimeActual Shutdown Monitor Time, in milliseconds, for which the 'User
Configured Shutdown FER' must be met for the link to remain
in-service, it's a multiple of the shutdown sample period required
to observe the FERro Integer32 .1.3.6.1.4.1.7262.2.4.13.12.2.1.18 |
hzQtmRlsPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.13.13 |
hzQtmRlsPort1This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.13.1 |
hzQtmRlsPort2This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.13.2 |
hzQtmRlsPort3This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.13.3 |
hzQtmRlsPort4This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.13.4 |
hzQtmRlsPort5This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.13.5 |
hzQtmRlsPort6This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.13.6 |
hzQtmRlsPort7This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.13.7 |
hzQtmRlsPort8This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.rw Enumeration .1.3.6.1.4.1.7262.2.4.13.13.8 |
hzQtmRlsPauseEnablerw Enumeration .1.3.6.1.4.1.7262.2.4.13.14 |
hzQtmSntp OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.14 |
hzQtmSntpEnableIndicates whether SNTP feature is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.4.14.1 |
hzQtmSntpOffsetSystem time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour.rw Integer32 (-140..140) .1.3.6.1.4.1.7262.2.4.14.2 |
hzQtmSntpServerTableTable containing sntp server entries SEQUENCE OF HzQtmSntpServerEntry .1.3.6.1.4.1.7262.2.4.14.3 |
hzQtmSntpServerEntryContains the sntp server information HzQtmSntpServerEntry .1.3.6.1.4.1.7262.2.4.14.3.1 |
hzQtmSntpServerIndexA unique value for each server.ro Integer32 .1.3.6.1.4.1.7262.2.4.14.3.1.1 |
hzQtmSntpServerIpAddressThe IP address of the server.rw IpAddress .1.3.6.1.4.1.7262.2.4.14.3.1.2 |
hzQtmSntpServerStatusThe status of the sntp server.ro Enumeration .1.3.6.1.4.1.7262.2.4.14.3.1.3 |
hzQtmSntpServerStratumSpecifies the stratum of a server, 0 for failed serverro Integer32 .1.3.6.1.4.1.7262.2.4.14.3.1.4 |
hzQtmSntpRestoreDefaultRestores SNTP servers to default Addresses.rw Enumeration .1.3.6.1.4.1.7262.2.4.14.4 |
hzQtmLogs OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.15 |
hzQtmEventLogEnableIndicates whether event log is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.4.15.1 |
hzQtmPerfmLogEnableIndicates whether performance log is enabled.rw Enumeration .1.3.6.1.4.1.7262.2.4.15.2 |
hzQtmPerfmLogIntervalPerformance statistics are logged periodically by this interval. The interval can be up to 24:00:00 (24 hours) and as short as 00:00:1 (1 seconds).rw DisplayString .1.3.6.1.4.1.7262.2.4.15.3 |
hzQtmSysLog OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.15.4 |
hzQtmSysLogEnablerw Enumeration .1.3.6.1.4.1.7262.2.4.15.4.1 |
hzQtmSysLogIpAddressrw IpAddress .1.3.6.1.4.1.7262.2.4.15.4.2 |
hzQtmRadius OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.16 |
hzQtmRadiusSuperUserAuthenticationThe set strict mode on or offrw Enumeration .1.3.6.1.4.1.7262.2.4.16.1 |
hzQtmRadiusServerTimeOutTimeout period for authentication requestsro Integer32 .1.3.6.1.4.1.7262.2.4.16.2 |
hzQtmRadiusServerDeadTimeTime to declare an unresponsive server 'dead'ro Integer32 .1.3.6.1.4.1.7262.2.4.16.3 |
hzQtmRadiusServerReTransmitMaximum number of retransmits to an unresponsive serverro Integer32 .1.3.6.1.4.1.7262.2.4.16.4 |
hzQtmRadiusServerTableTable containing radius server entries SEQUENCE OF HzQtmRadiusServerEntry .1.3.6.1.4.1.7262.2.4.16.5 |
hzQtmRadiusServerEntryContains the sntp server information HzQtmRadiusServerEntry .1.3.6.1.4.1.7262.2.4.16.5.1 |
hzQtmRadiusServerIndexA unique value for each server.ro Integer32 .1.3.6.1.4.1.7262.2.4.16.5.1.1 |
hzQtmRadiusCfgdHostIpAddressThe IP address of the configured radius server.
Note: Changing this option requires a system reset.rw IpAddress .1.3.6.1.4.1.7262.2.4.16.5.1.2 |
hzQtmRadiusActiveHostIpAddressThe IP address of the active radius server.ro IpAddress .1.3.6.1.4.1.7262.2.4.16.5.1.3 |
hzQtmSnmpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.21 |
hzQtmLinkDownA linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.1 |
hzQtmLinkUpA linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.2 |
hzQtmExplicitAuthenticationFailureAuthentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty
cable between the modem and radio, and recommended course of action is to check both ends of the link. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.3 |
hzQtmExplicitAuthenticationFailureClearedThe condition has cleared. The peer node is now authenticated. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.4 |
hzQtmHitlessAamConfigMisMatchHitless Automatic Adaptive modulation configuration mismatch NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.5 |
hzQtmHitlessAamConfigMisMatchClearedHitless Automatic Adaptive modulation configuration mismatch cleared NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.6 |
hzQtmHitlessAamActiveHitless Automatic Adaptive modulation on and system running on lower modulation NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.7 |
hzQtmHitlessAamActiveClearedHitless Automatic Adaptive modulation on system running on higher modulation NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.8 |
hzQtmAtpcConfigMismatchATPC configuration mismatch in the Horizon systems. ATPC is enabled at one system, but ATPC is not enabled at the other system. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.9 |
hzQtmAtpcConfigMismatchClearedATPC configuration mismatch in the Horizon systems is cleared. Both systems enabled ATPC. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.10 |
hzQtmSntpServersUnreachableCan't reach any of the sntp servers NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.11 |
hzQtmSntpServersUnreachableClearedAt least one of SNTP servers is reachable NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.12 |
hzQtmFrequencyFileInvalidWhen the executing frequency file is invalid,
this trap is generated. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.13 |
hzQtmDroppedFramesThresholdExceededThe ethernet dropped frames threshold has been detected above its threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.14 |
hzQtmDroppedFramesThresholdExceededClearedThe condition has cleared.The ethernet dropped frames threshold is now below its threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.15 |
hzQtmBwUtilizationThresholdExceededThe ethernet bandwidth threshold has been detected above its threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.16 |
hzQtmBwUtilizationThresholdExceededClearedThe condition has cleared. The ethernet bandwidth threshold is now below its threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.17 |
hzQtmRlsMismatchRLS mismatch NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.18 |
hzQtmRlsMismatchClearedRLS mismatch cleared NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.19 |
hzQtmRlsQueueBasedShutdownActivatedRLS Queue-Based shutdown is activated NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.20 |
hzQtmRlsQueueBasedShutdownActivatedClearedRLS Queue-Based shutdown is not activated NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.21 |
hzQtmModemRxLossOfSignalLockLoss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end,
and recommended course of action is to check the operational state of both ends of the link. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.22 |
hzQtmModemRxLossOfSignalLockClearedLoss of signal lock from demodulator cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.23 |
hzQtmModemTxLossOfSyncLoss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical
interference in the air link, and recommended course of action is to check the line of site between the horizon nodes. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.24 |
hzQtmModemTxLossOfSyncClearedTx Loss of sync bytes cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.25 |
hzQtmModemSnrBelowThresholdThe demodulator SNR performance worse than programmed levels. The severity is major, the probable cause
is physical interference in the air link path or misalignment of the radios or severe weather conditions,
and recommended course of action is to check the line of site between the horizon nodes. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.26 |
hzQtmModemSnrBelowThresholdClearedSNR performance back to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.27 |
hzQtmModemEqualizerStressExceedThresholdEqualizer Stress measured within the demodulator exceeds the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.28 |
hzQtmModemEqualizerStressExceedThresholdClearedEqualizer Stress measured within the demodulator is within the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.29 |
hzQtmModemChannelizedRslBelowThresholdThe RSL has been detected below its minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.30 |
hzQtmModemChannelizedRslBelowThresholdClearedThe condition has cleared. RSL is now above its minimum threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.31 |
hzQtmFpgaProgrammingErrorEncountered problem while programming modem. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.32 |
hzQtmFpgaProgrammingErrorClearedProblem encountered while programming modem is gone. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.33 |
hzQtmUserSessionCommencedA person has successfully gained access to the ascii management port (telnet, local management port, or HTTP).
The username is included in the Trap. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.34 |
hzQtmUserSessionTerminatedA person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.35 |
hzQtmAtpcTxAtMaxPwrATPC auto-disabled (transmitting at coordinated power). NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.36 |
hzQtmAtpcTxAtMaxPwrClearedATPC has been disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.37 |
hzQtmRadioSynthLostLockThe radio synthesizer has lost lock. The severity is critical, the probable cause is a faulty radio,
and recommended course of action is to replace the radio unit NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.38 |
hzQtmRadioSynthLostLockClearedThe radio synthesizer lost lock condition has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.39 |
hzQtmRadioLostCommunicationRS232 communication lost between IDU and the radio. The severity is critical, the probable cause is a faulty cable
between the modem and radio, and recommended course of action is to check the connection. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.40 |
hzQtmRadioLostCommunicationClearedRS232 communication has been re-establisted between IDU and the radio. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.41 |
hzQtmRadioMismatchThe radio connected to the IDU modem does not match the frequency programmed into the modem unit. The severity is major,
the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the modem,
and recommended course of action is to check the modem frequency settings and radio hardware version number or serial number. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.42 |
hzQtmRadioMismatchClearedThe condition has cleared. The radio matches the programmed parameters in the modem. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.43 |
hzQtmRadioPowerAmpThe power amplifier on the radio is not operating within normal operating specifications. The severity is critical,
the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.44 |
hzQtmRadioPowerAmpClearedThe power amplifier on the radio is now operating within normal specifications NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.45 |
hzQtmRadioExcessiveTxCableLossThe radio cannot compensate for the calculated amount of Tx Cable Loss. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.46 |
hzQtmRadioExcessiveTxCableLossClearedRadio Excessive Tx Cable Loss cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.47 |
hzQtmHiPowerRadioTxDetectorThis applies to High Power Radios only. Indicates minimum power threshold has not been surpassed. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.48 |
hzQtmHiPowerRadioTxDetectorClearedThis applies to High Power Radios only. Indicates minimum power threshold alarm has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.49 |
hzQtmSecondaryRadioIsActiveRadio redundancy on, secondary radio is active. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.50 |
hzQtmSecondaryRadioIsActiveClearedRadio redundancy, secondary radio is no longer active. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.51 |
hzQtmRedundancySerialNumberMisMatchThe radio serial number programmed in flash and radio do not match. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.52 |
hzQtmRedundancySerialNumberMisMatchClearedThe radio serial number mismatch has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.53 |
hzQtmRadioFirmwareMismatchThe radio connected to the IDU modem does not match the radio band or frequency bank specified by the user.
As a result, the system will not work. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.54 |
hzQtmRadioFirmwareMismatchClearedRadio Firmnware mismatch cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.55 |
hzQtmSecondaryRadioNotdetectedSecondary radio not detected. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.56 |
hzQtmSecondaryRadioNotdetectedClearedsecondary Radio not detected alarm cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.57 |
hzQtmPrimaryRadioNotdetectedPrimary Radio not detected. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.58 |
hzQtmPrimaryRadioNotdetectedClearedPrimary Radio not detected alarm cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.59 |
hzQtmFaultyPrimaryRadioFaulty Primary Radio. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.60 |
hzQtmFaultyPrimaryRadioClearedFaulty Primary Radio alarm cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.61 |
hzQtmRadioExcessiveTxCableLossChangeExcessive IF cable loss change detected. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.62 |
hzQtmRadioExcessiveTxCableLossChangeClearedExcessive IF cable loss change cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.63 |
hzQtmExcessiveRxCableLossRadio - Excessive receive cable loss detected. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.64 |
hzQtmExcessiveRxCableLossClearedRadio - Excessive receive cable loss cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.65 |
hzQtmRedundancyPrimaryPortNotSetRadio Redundancy: Primary Port not set. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.66 |
hzQtmRedundancyPrimaryPortNotSetClearedRadio Redundancy: Primary Port not set - cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.67 |
hzQtmRedundancySecondaryPortIsActiveRadio Redundancy: Secondary Port is Active. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.68 |
hzQtmRedundancySecondaryPortIsActiveClearedRadio Redundancy: Secondary Port is no longer Active NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.69 |
hzQtmRedundancyPrimaryPortFaultyRadio Redundancy: Primary Port is Faulty. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.70 |
hzQtmRedundancyPrimaryPortFaultyClearedRadio Redundancy: Primary Port is no longer Faulty. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.71 |
hzQtmRedundancySecondaryPortFaultyRadio Redundancy: Secondary Port is Faulty. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.72 |
hzQtmRedundancySecondaryPortFaultyClearedRadio Redundancy: secondary Port is no longer Faulty. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.73 |
hzQtmFanFailedFan 1 has failed NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.74 |
hzQtmFanFailureClearedThe Fan 1 Failure has Cleared NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.75 |
hzQtmModemRlsShutdownActivatedRLS shutdown is activated NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.76 |
hzQtmModemRlsShutdownActivatedClearedRLS shutdown is not activated NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.77 |
hzQtmRadioUnitHwChangedIndication that the Radio Unit hardware has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.78 |
hzQtmRadioSwDownloadFailedThe IDU failed to upload the radio firmware during the radio boot cycle. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.79 |
hzQtmRadioSwDownloadFailedClearedThe IDU successfully uploaded the radio firmware after an initial upload failure. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.80 |
hzQtmRadioRestartedOKRadio unit has successfully restarted after a failure was found during a previous boot cycle. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.81 |
hzQtmMibChangeNotSavedThe system has automatically re-programmed the mib but it has not been saved to flash.
The system event logs will indicate what has changed in the mib.
The user must invoke the 'save mib' command to save the mib to flash. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.82 |
hzQtmMibChangeNotSavedClearedThe mib has been saved to flash since the system has automatically re-programmed the mib NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.83 |
hzQtmRadioDrainCurrentThe radio has a drain current alarm. View the system logs for more information. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.84 |
hzQtmRadioDrainCurrentClearedThe radio drain current alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.85 |
hzQtmIFSynthLostLockThe Synthesizer has Lost Lock on the IF Path. View the system logs for more information. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.86 |
hzQtmIFSynthLostLockClearedThe IF Synthesizer Lost Lock alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.87 |
hzQtmInvalidSystemConfigThe system has been configured incorrectly. Check the logs or use the CLI get alarms
to isolate the cause. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.88 |
hzQtmInvalidSystemConfigClearedThe invalid system configuration alarm has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.89 |
hzQtmHitlessAamEventHitless Automatic Adaptive modulation switch triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.90 |
hzQtmModemXPICEquStressExceedThresholdXPIC Equalizer Stress measured within the demodulator exceeds the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.91 |
hzQtmModemXPICEquStressExceedThresholdClearedXPIC Equalizer Stress measured within the demodulator is within the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.92 |
hzQtmPartnerNodeAlarmIndicationThe configuration in the partner node does not match this system. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.93 |
hzQtmPartnerNodeAlarmIndicationClearedPartner node alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.94 |
hzQtmBandwidthDoublingInvalidLinkConfigThe bandwidth doubling has invalid link configuration. i.e., Primary is synchronized with remote primary, and secondary is synchronized with remote secondary NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.95 |
hzQtmBandwidthDoublingInvalidLinkConfigClearedBandwidth doubling invalid link configuration alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.96 |
hzQtmBandwidthDoublingWrongPortConnectedWrong port is connected to the loacal partner. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.97 |
hzQtmBandwidthDoublingWrongPortConnectedClearedBandwidth doubling wrong port connected alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.98 |
hzQtmRadioPowerOffRadio power is off (potential IF cable short detection). NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.99 |
hzQtmRadioPowerOffClearedRadio power off alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.100 |
hzQtmSynceLostLockSyncE Lost Lock alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.101 |
hzQtmSynceLostLockClearedSyncE Lost Lock alarm cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.102 |
hzQtmSynceSecondarySourceInUseSyncE Secondary Source in use alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.103 |
hzQtmSynceSecondarySourceInUseClearedSyncE Secondary Source in use alarm cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.7262.2.4.21.104 |
hzQtmReserved OBJECT IDENTIFIER .1.3.6.1.4.1.7262.2.4.999 |
hzQtmModIdentity MODULE-IDENTITY .1.3.6.1.4.1.7262.2.4.1000 |