MSERIES-ENVMON-MIB
The MSERIES-ENVMON-MIB enables SNMP-based monitoring of environmental sensor data, including temperature, voltage, and fan status, on Alcatel-Lucent (Nokia) SmartOptics M-Series optical transport hardware. This enterprise-specific module facilitates real-time hardware health assessment and fault detection for critical network infrastructure components.
Imported Objects
Objects
12 total| Object Name |
|---|
smartEnvMonThis is the enterprise specific Enviroment Monitor MIB for SmartOptics M-Series. MODULE-IDENTITY .1.3.6.1.4.1.30826.1.4 |
smartEnvMonObjects OBJECT IDENTIFIER .1.3.6.1.4.1.30826.1.4.1 |
smartEnvMonTemperatureTableThis table contains one row per temperature sensor. SEQUENCE OF SmartEnvMonTemperatureEntry .1.3.6.1.4.1.30826.1.4.1.1 |
smartEnvMonTemperatureEntryInformation about a particular temperature sensor. SmartEnvMonTemperatureEntry .1.3.6.1.4.1.30826.1.4.1.1.1 |
smartEnvMonTemperatureIndexAn unique index for each temperature sensor.ro Unsigned32 .1.3.6.1.4.1.30826.1.4.1.1.1.1 |
smartEnvMonTemperatureDescrThe name of the temperature sensor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.30826.1.4.1.1.1.2 |
smartEnvMonTemperatureValueThe temperature in Celsius measured by the sensor.ro Integer32 UNITS "degrees Celsius" .1.3.6.1.4.1.30826.1.4.1.1.1.3 |
smartEnvMonMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.30826.1.4.2 |
smartEnvMonGroups OBJECT IDENTIFIER .1.3.6.1.4.1.30826.1.4.2.1 |
smartEnvMonTemperatureGroupV1The EnvMon Temperatue MIB objects v1. Unknown .1.3.6.1.4.1.30826.1.4.2.1.1 |
smartEnvMonCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.30826.1.4.2.2 |
smartEnvMonBasicComplV1Basic implementation requirements for the ENVMON MIB. Unknown .1.3.6.1.4.1.30826.1.4.2.2.1 |
More MIBs from SmartOptics
Browse all SmartOpticsMIBs →The DCP-INTERFACE-MIB enables monitoring and management of Smartoptics DCP (Digital Cross-Connect) interface parameters, including optical power levels, signal status, and port configuration states. This enterprise-specific module facilitates granular visibility into the physical and data link layer performance of Smartoptics optical transport hardware.
The MSERIES-ALARM-MIB module enables SNMP-based monitoring of critical fault conditions and operational alerts on Nokia SmartOptics M-Series optical transport hardware. It specifically tracks alarm states, severity levels, and event triggers to facilitate real-time network fault detection and troubleshooting within the optical layer.
The DCP-ALARM-MIB enables monitoring of alarm states and fault conditions on Smartoptics Dense Wavelength Division Multiplexing (DWDM) optical transport equipment. It provides enterprise-specific trap notifications and object definitions for tracking critical hardware and link integrity events within Smartoptics optical network infrastructure.
The DCP-OCH-MIB module enables monitoring and management of Smartoptics Dense Wavelength Division Multiplexing (DWDM) optical channel (OCH) hardware, specifically exposing performance metrics such as optical power levels, signal-to-noise ratios, and error counters for individual wavelength channels.
The DCP-LINKVIEW-MIB enables monitoring of Smartoptics Dense Wavelength Division Multiplexing (DWDM) optical transport links, specifically tracking per-channel optical power levels, signal-to-noise ratios, and link status states. This enterprise-specific module facilitates granular visibility into the physical layer performance and health of Smartoptics DCP (Digital Cross-Connect) equipment.
The MSERIES-PORT-MIB provides vendor-specific SNMP access to monitor and manage physical port interfaces, link states, and traffic counters on Ciena SmartOptics M-Series optical transport equipment.