DCP-OCH-MIB
The DCP-OCH-MIB module enables monitoring and management of Smartoptics Dense Wavelength Division Multiplexing (DWDM) optical channel (OCH) hardware, specifically exposing performance metrics such as optical power levels, signal-to-noise ratios, and error counters for individual wavelength channels.
Imported Objects
Objects
31 total| Object Name |
|---|
dcpOchThis is the enterprise specific DCP OCH MIB for Smartoptics MODULE-IDENTITY .1.3.6.1.4.1.30826.2.2.4 |
dcpOchGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.4.1 |
dcpOchGeneralTableA table with general information about the och port. SEQUENCE OF OchGeneralEntry .1.3.6.1.4.1.30826.2.2.4.1.1 |
dcpOchGeneralEntryDescription. OchGeneralEntry .1.3.6.1.4.1.30826.2.2.4.1.1.1 |
dcpOchGeneralIndexPort Index in the following format: ccspp where cc: chassis. s: slot number. pp: port number. Unsigned32 .1.3.6.1.4.1.30826.2.2.4.1.1.1.1 |
dcpOchGeneralPortNameThe port name in the following format: och-c/s/port where c = chassis, s = slot, port = port name or ocm-c/s where c = chassis, s = slotro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.4.1.1.1.2 |
dcpOchGeneralSpacingThe channel spacing used in units of 0.01 GHz.ro DcpHundreds (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.4.1.1.1.3 |
dcpOchGeneralMaxChannelsThe number of channels that is used for the optical power channel plan for the EDFA.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.4.1.1.1.4 |
dcpOchGeneralActiveChannelsThe number of active channels currently in regulation.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.4.1.1.1.5 |
dcpOchGeneralUtilizationThe number of channels used in the system in units of %.ro Gauge32 .1.3.6.1.4.1.30826.2.2.4.1.1.1.6 |
dcpOchGeneralConfiguredChannelsThe number of channels that are enabled.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.4.1.1.1.7 |
dcpOchObjects OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.4.2 |
dcpOchTableA table with all optical channels of the system. SEQUENCE OF OchInterfaceEntry .1.3.6.1.4.1.30826.2.2.4.2.1 |
dcpOchEntryDescription. OchInterfaceEntry .1.3.6.1.4.1.30826.2.2.4.2.1.1 |
dcpOchIndexOch Index in the following format: cspoooy where c: chassis. s: slot number. p: port number. ooo: Och number. y: 0 = tx+rx port, 1 = tx port, 2 = rx port. Same Index is used in the IF-MIB. Unsigned32 .1.3.6.1.4.1.30826.2.2.4.2.1.1.1 |
dcpOchChannelIdThe optical channel id name in the following format: och-c/s/p/och where c = chassis. s = slot number. port = edfa or eq. och = optical channel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.4.2.1.1.2 |
dcpOchRxPowerThe optical input power for the optical channel in units of 0.1 dBm.ro DcpTenths (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.4.2.1.1.3 |
dcpOchTxPowerThe optical output power for the optical channel in units of 0.1 dBm.ro DcpTenths (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.4.2.1.1.4 |
dcpOchWssAttenuationThe WSS attenuation for the optical channel in units of 0.1 dB.ro DcpTenths (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.4.2.1.1.5 |
dcpOchWssInsertionLossThe calibration value of WSS insertion loss in units of 0.1 dBm.ro DcpTenths (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.4.2.1.1.6 |
dcpOchWantedOutputPowerThe wanted optical output power for the optical channel in units of 0.1 dBm.ro DcpTenths (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.4.2.1.1.7 |
dcpOchPortModeThe port mode for the channel. Port mode can be on or off. off - The channel is disabled. on - The channel is enabled. edfa - The channel is enabled and connected to the edfa port. express - The channel is enabled and connected to the express port.ro OchPortMode (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.4.2.1.1.8 |
dcpOchStatusThe operational state for a channel. idle - The optical channel is not activated. down - The optical channel traffic is lost. up - There is traffic on the optical channel.ro InterfaceStatus (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.4.2.1.1.9 |
dcpOchDescriptionUser configurable description string for the optical channel.ro DisplayString .1.3.6.1.4.1.30826.2.2.4.2.1.1.10 |
dcpOchAlarmThe highest alarm severity of the optical channel.ro ItuPerceivedSeverity (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.4.2.1.1.11 |
dcpOchMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.4.3 |
dcpOchMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.4.3.1 |
dcpOchGeneralTableGroupV1The och general table objects V1. Unknown .1.3.6.1.4.1.30826.2.2.4.3.1.1 |
dcpOchTableGroupV1The och table objects V1. Unknown .1.3.6.1.4.1.30826.2.2.4.3.1.2 |
dcpOchMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.4.3.2 |
dcpOchBasicComplV1Basic implementation requirements for the DCP-OCH-MIB V1. Unknown .1.3.6.1.4.1.30826.2.2.4.3.2.1 |
More MIBs from SmartOptics
Browse all SmartOpticsMIBs →The DCP-INTERFACE-MIB enables monitoring and management of Smartoptics DCP (Digital Cross-Connect) interface parameters, including optical power levels, signal status, and port configuration states. This enterprise-specific module facilitates granular visibility into the physical and data link layer performance of Smartoptics optical transport hardware.
The MSERIES-ALARM-MIB module enables SNMP-based monitoring of critical fault conditions and operational alerts on Nokia SmartOptics M-Series optical transport hardware. It specifically tracks alarm states, severity levels, and event triggers to facilitate real-time network fault detection and troubleshooting within the optical layer.
The DCP-ALARM-MIB enables monitoring of alarm states and fault conditions on Smartoptics Dense Wavelength Division Multiplexing (DWDM) optical transport equipment. It provides enterprise-specific trap notifications and object definitions for tracking critical hardware and link integrity events within Smartoptics optical network infrastructure.
The DCP-LINKVIEW-MIB enables monitoring of Smartoptics Dense Wavelength Division Multiplexing (DWDM) optical transport links, specifically tracking per-channel optical power levels, signal-to-noise ratios, and link status states. This enterprise-specific module facilitates granular visibility into the physical layer performance and health of Smartoptics DCP (Digital Cross-Connect) equipment.
The MSERIES-PORT-MIB provides vendor-specific SNMP access to monitor and manage physical port interfaces, link states, and traffic counters on Ciena SmartOptics M-Series optical transport equipment.
The MSERIES-ENVMON-MIB enables SNMP-based monitoring of environmental sensor data, including temperature, voltage, and fan status, on Alcatel-Lucent (Nokia) SmartOptics M-Series optical transport hardware. This enterprise-specific module facilitates real-time hardware health assessment and fault detection for critical network infrastructure components.