DCP-ALARM-MIB
The DCP-ALARM-MIB enables monitoring of alarm states and fault conditions on Smartoptics Dense Wavelength Division Multiplexing (DWDM) optical transport equipment. It provides enterprise-specific trap notifications and object definitions for tracking critical hardware and link integrity events within Smartoptics optical network infrastructure.
Imported Objects
Objects
52 total| Object Name |
|---|
dcpAlarmThis is the enterprise specific DCP ALARM MIB for Smartoptics MODULE-IDENTITY .1.3.6.1.4.1.30826.2.2.2 |
dcpAlarmGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.2.1 |
dcpAlarmGeneralList OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.2.1.1 |
dcpAlarmGeneralHighestSeverityThe highest severity of the active alarms in the system.ro ItuPerceivedSeverity (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.2.1.1.1 |
dcpAlarmGeneralActiveCriticalThe number of active critical alarms in the system.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.2.1.1.2 |
dcpAlarmGeneralActiveMajorThe number of active major alarms in the system.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.2.1.1.3 |
dcpAlarmGeneralActiveMinorThe number of active minor alarms in the system.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.2.1.1.4 |
dcpAlarmGeneralActiveWarningThe number of active warning alarms in the system.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.2.1.1.5 |
dcpAlarmGeneralNumberActiveListThe number of active alarms in the system. This is also the number of alarms in the dcpAlarmActiveLTablero Unsigned32 .1.3.6.1.4.1.30826.2.2.2.1.1.6 |
dcpAlarmGeneralNumberLogListThe number of alarms(active and deactivated) there is in the system. This number matches the number of rows in the dcpAlarmLogTable.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.2.1.1.7 |
dcpAlarmGeneralLastTrapSeqNumberThe sequece number used when the last Enterprise trap was sent.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.2.1.1.8 |
dcpAlarmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.2.2 |
dcpAlarmActiveListTableKeeps a list of the current active alarms in the system. SEQUENCE OF DcpAlarmActiveListEntry .1.3.6.1.4.1.30826.2.2.2.2.1 |
dcpAlarmActiveListEntryDescription. DcpAlarmActiveListEntry .1.3.6.1.4.1.30826.2.2.2.2.1.1 |
dcpAlarmActiveListIndexUnique index assigned to each alarm.ro DcpAlarmIndex .1.3.6.1.4.1.30826.2.2.2.2.1.1.1 |
dcpAlarmActiveListLocationThe location from where the alarm originated. chassis, slot 1, slot 2, psu-1/1, psu-1/2 or fan-1/1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.2.2.1.1.2 |
dcpAlarmActiveListInterfaceNameThe interface name from where the alarm originated. If no interface this value is empty. if-c/s/i where c = chassis, s = slot, i = interface or if-c/channelid where c = chassis.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.2.2.1.1.3 |
dcpAlarmActiveListTextThe text for the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.2.2.1.1.4 |
dcpAlarmActiveListSeverityThe severity of the alarm as defined in ITU-T X.733.ro ItuPerceivedSeverity (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.2.2.1.1.5 |
dcpAlarmActiveListStartTimeThe time when the alarm was activated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.2.2.1.1.6 |
dcpAlarmActiveListSeqNumberThis OID currently always returns 0.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.2.2.1.1.7 |
dcpAlarmActiveListInterfaceDescriptionThe interface description field from where the alarm originated.ro DisplayString .1.3.6.1.4.1.30826.2.2.2.2.1.1.8 |
dcpAlarmLogTableKeeps a list of the current active and deactivated alarms in the system. SEQUENCE OF DcpAlarmLogEntry .1.3.6.1.4.1.30826.2.2.2.2.2 |
dcpAlarmLogEntryDescription. DcpAlarmLogEntry .1.3.6.1.4.1.30826.2.2.2.2.2.1 |
dcpAlarmLogListIndexUnique index assigned to each alarm.ro DcpAlarmIndex .1.3.6.1.4.1.30826.2.2.2.2.2.1.1 |
dcpAlarmLogListLocationThe location from where the alarm originated. chassis, slot 1, slot 2, psu-1/1, psu-1/2 or fan-1/1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.2.2.2.1.2 |
dcpAlarmLogListInterfaceNameThe interface name from where the alarm originated. If no interface this value is empty. if-c/s/i where c = chassis, s = slot and i = interface number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.2.2.2.1.3 |
dcpAlarmLogListTextThe alarm text for the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.2.2.2.1.4 |
dcpAlarmLogListSeverityThe severity of the alarm as defined in ITU-T X.733.ro ItuPerceivedSeverity (SO-TC-MIB) .1.3.6.1.4.1.30826.2.2.2.2.2.1.5 |
dcpAlarmLogListStartTimeThe time when the alarm was activated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.2.2.2.1.6 |
dcpAlarmLogListEndTimeThe time when the alarm was deactivated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.30826.2.2.2.2.2.1.7 |
dcpAlarmLogListSeqNumberThis OID currently always returns 0.ro Unsigned32 .1.3.6.1.4.1.30826.2.2.2.2.2.1.8 |
dcpAlarmLogListInterfaceDescriptionThe interface description field from where the alarm originated.ro DisplayString .1.3.6.1.4.1.30826.2.2.2.2.2.1.9 |
dcpAlarmMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.2.3 |
dcpAlarmNotification OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.2.3.0 |
dcpAlarmNotificationClearedSent when an alarm is deactivated. NOTIFICATION-TYPE .1.3.6.1.4.1.30826.2.2.2.3.0.1 |
dcpAlarmNotificationCriticalSent when an alarm of severity critical is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.30826.2.2.2.3.0.2 |
dcpAlarmNotificationMajorSent when an alarm of severity major is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.30826.2.2.2.3.0.3 |
dcpAlarmNotificationMinorSent when an alarm of severity minor is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.30826.2.2.2.3.0.4 |
dcpAlarmNotificationWarningSent when an alarm of severity warning is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.30826.2.2.2.3.0.5 |
dcpAlarmMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.2.4 |
dcpAlarmMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.2.4.1 |
dcpAlarmGeneralGroupV1The general alarm objects V1. Unknown .1.3.6.1.4.1.30826.2.2.2.4.1.1 |
dcpAlarmNotificationGroupV1The alarm notifications V1. Unknown .1.3.6.1.4.1.30826.2.2.2.4.1.2 |
dcpAlarmActiveListGroupV1The active alarm list objects V1.deprecated Unknown .1.3.6.1.4.1.30826.2.2.2.4.1.3 |
dcpAlarmLogListGroupV1The alarm log list objects V1.deprecated Unknown .1.3.6.1.4.1.30826.2.2.2.4.1.4 |
dcpAlarmLogListGroupV2The alarm log list objects V2. Unknown .1.3.6.1.4.1.30826.2.2.2.4.1.5 |
dcpAlarmActiveListGroupV2The active alarm list objects V2. Unknown .1.3.6.1.4.1.30826.2.2.2.4.1.6 |
dcpAlarmMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.30826.2.2.2.4.2 |
dcpAlarmBasicComplV1Basic implementation requirements for the DCP-ALARM-MIB V1.deprecated Unknown .1.3.6.1.4.1.30826.2.2.2.4.2.1 |
dcpAlarmBasicComplV2Basic requirements for the DCP-ALARM-MIB Compliance V2.deprecated Unknown .1.3.6.1.4.1.30826.2.2.2.4.2.2 |
dcpAlarmBasicComplV3Basic requirements for the DCP-ALARM-MIB Compliance V3. Unknown .1.3.6.1.4.1.30826.2.2.2.4.2.3 |
More MIBs from SmartOptics
Browse all SmartOpticsMIBs →The DCP-INTERFACE-MIB enables monitoring and management of Smartoptics DCP (Digital Cross-Connect) interface parameters, including optical power levels, signal status, and port configuration states. This enterprise-specific module facilitates granular visibility into the physical and data link layer performance of Smartoptics optical transport hardware.
The MSERIES-ALARM-MIB module enables SNMP-based monitoring of critical fault conditions and operational alerts on Nokia SmartOptics M-Series optical transport hardware. It specifically tracks alarm states, severity levels, and event triggers to facilitate real-time network fault detection and troubleshooting within the optical layer.
The DCP-OCH-MIB module enables monitoring and management of Smartoptics Dense Wavelength Division Multiplexing (DWDM) optical channel (OCH) hardware, specifically exposing performance metrics such as optical power levels, signal-to-noise ratios, and error counters for individual wavelength channels.
The DCP-LINKVIEW-MIB enables monitoring of Smartoptics Dense Wavelength Division Multiplexing (DWDM) optical transport links, specifically tracking per-channel optical power levels, signal-to-noise ratios, and link status states. This enterprise-specific module facilitates granular visibility into the physical layer performance and health of Smartoptics DCP (Digital Cross-Connect) equipment.
The MSERIES-PORT-MIB provides vendor-specific SNMP access to monitor and manage physical port interfaces, link states, and traffic counters on Ciena SmartOptics M-Series optical transport equipment.
The MSERIES-ENVMON-MIB enables SNMP-based monitoring of environmental sensor data, including temperature, voltage, and fan status, on Alcatel-Lucent (Nokia) SmartOptics M-Series optical transport hardware. This enterprise-specific module facilitates real-time hardware health assessment and fault detection for critical network infrastructure components.