MARVELL-FIP-MIB
The MARVELL-FIP-MIB provides vendor-specific SNMP access for monitoring and managing Fibre Channel over Ethernet (FCoE) Initialization Protocol (FIP) state machines, link establishment sessions, and discovery parameters on Marvell network adapters and switches. It exposes critical FIP control variables and counters required to diagnose FCoE fabric connectivity issues and validate virtualization network integration.
Imported Objects
Objects
26 total| Object Name |
|---|
rlFipThe private MIB module definition for FIP MIB. MODULE-IDENTITY .1.3.6.1.4.1.89.205 |
rlFipIfTableThis table used to configure Global FCF MAC addresses. SEQUENCE OF RlFipIfEntry .1.3.6.1.4.1.89.205.1 |
rlFipIfEntryFIP Interface Table. RlFipIfEntry .1.3.6.1.4.1.89.205.1.1 |
rlFipIfIndexInterface index. INTEGER .1.3.6.1.4.1.89.205.1.1.1 |
rlFipIfTypeInterface type.rw RlFipIfType .1.3.6.1.4.1.89.205.1.1.2 |
rlFipIfRowStatusThe status of the entry. It's used to add/delete the entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.205.1.1.3 |
rlFipGlobalFcfListTableThis table used to configure Global FCF MAC addresses. SEQUENCE OF RlFipGlobalFcfListEntry .1.3.6.1.4.1.89.205.2 |
rlFipGlobalFcfListEntryGlobal FCF MAC address. RlFipGlobalFcfListEntry .1.3.6.1.4.1.89.205.2.1 |
rlFipGlobalFcfListMacGlobal FCF MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.205.2.1.1 |
rlFipGlobalFcfListStatusThe status of the entry. It's used to add/delete the entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.205.2.1.2 |
rlFipStaticFcoeTunnelTableThis table used to configure Fip Static FCOE Tunnels. SEQUENCE OF RlFipStaticFcoeTunnelEntry .1.3.6.1.4.1.89.205.3 |
rlFipStaticFcoeTunnelEntryFIP Static FCOE Tunnel. RlFipStaticFcoeTunnelEntry .1.3.6.1.4.1.89.205.3.1 |
rlFipStaticFcoeTunnelPortFCOE tunnel port. INTEGER .1.3.6.1.4.1.89.205.3.1.1 |
rlFipStaticFcoeTunnelSrcMacFCOE tunnel Source MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.205.3.1.2 |
rlFipStaticFcoeTunnelDstMacFCOE tunnel Destination MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.205.3.1.3 |
rlFipStaticFcoeTunnelStatusThe status of the entry. It's used to add/delete the entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.205.3.1.4 |
rlFipActiveFcoeTunnelTableThis table used to show Fip Active FCOE Tunnels. SEQUENCE OF RlFipActiveFcoeTunnelEntry .1.3.6.1.4.1.89.205.4 |
rlFipActiveFcoeTunnelEntryFIP Active FCOE Tunnel. RlFipActiveFcoeTunnelEntry .1.3.6.1.4.1.89.205.4.1 |
rlFipActiveFcoeTunnelPortFCOE tunnel port. INTEGER .1.3.6.1.4.1.89.205.4.1.1 |
rlFipActiveFcoeTunnelSrcMacFCOE tunnel Source MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.205.4.1.2 |
rlFipActiveFcoeTunnelDstMacFCOE tunnel Destination MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.205.4.1.3 |
rlFipActiveFcoeTunnelSidFCOE Source ID. OCTET STRING .1.3.6.1.4.1.89.205.4.1.4 |
rlFipActiveFcoeTunnelStatusThe status of the entry. It's used to add/delete the entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.205.4.1.5 |
rlFipEnableScalarFIP Enable/Disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.205.5 |
rlFipClearDynamicEntiesScalarClear dynamic tunnels.rw INTEGER .1.3.6.1.4.1.89.205.6 |
rlFipGlobalFcfFilteringEnableScalarEnable/Disable filtering of packets based on
configured list of MAC addresses of FCFs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.205.7 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.