LLDP-EXT-DOT1-V2-MIB
AI MIB Summary
The LLDP-EXT-DOT1-V2-MIB module extends the LLDP-V2 framework to expose IEEE 802.1Q and 802.1Qaz organizationally defined TLVs, enabling the monitoring of VLAN tagging configurations, Priority Flow Control (PFC) states, and Enhanced Transmission Selection (ETS) parameters on Layer 2 network switches. This allows administrators to verify and manage data center network flow control policies and VLAN membership attributes via SNMP.
The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information.
In order to assure the uniqueness of the LLDP-V2-MIB, lldpV2Xdot1MIB is branched from lldpV2Extensions using an Organizationally Unique Identifier (OUI) value as the node. An OUI is a 24 bit globally unique number assigned by the IEEE Registration Authority - see:
http://standards.ieee.org/develop/regauth/oui/index.html
Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2011.
Copyright (C) IEEE (2011). This version of this MIB module is published as Annex D.4.5 of IEEE Std 802.1Qaz-2011; see the standard itself for full legal notices.
Main OID:
lldpV2Xdot1MIB.1.3.111.2.802.1.1.13.1.5.32962
244
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
244 total| Object Name |
|---|
lldpV2Xdot1MIBThe LLDP Management Information Base extension module for
IEEE 802.1 organizationally defined discovery information.
In order to assure the uniqueness of the LLDP-V2-MIB,
lldpV2Xdot1MIB is branched from lldpV2Extensions using an
Organizationally Unique Identifier (OUI) value as the node.
An OUI is a 24 bit globally unique number assigned by the
IEEE Registration Authority - see:
http://standards.ieee.org/develop/regauth/oui/index.html
Unless otherwise indicated, the references in this
MIB module are to IEEE Std 802.1Q-2011.
Copyright (C) IEEE (2011). This version of this MIB module
is published as Annex D.4.5 of IEEE Std 802.1Qaz-2011;
see the standard itself for full legal notices. MODULE-IDENTITY .1.3.111.2.802.1.1.13.1.5.32962 |
lldpV2Xdot1Objects OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.1 |
lldpV2Xdot1Config OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.1.1 |
lldpV2Xdot1ConfigPortVlanTableA table that controls selection of LLDP Port VLAN-ID TLVs
to be transmitted on individual ports. SEQUENCE OF LldpV2Xdot1ConfigPortVlanEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.1 |
lldpV2Xdot1ConfigPortVlanEntryLLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Port
VLAN-ID TLV on LLDP transmission capable ports.
This configuration object augments the
lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only
present along with the port configuration defined by the
associated lldpV2PortConfigEntry entry.
Each active lldpConfigEntry is restored from non-volatile
storage (along with the corresponding
lldpV2PortConfigEntry) after a re-initialization of the
management system. LldpV2Xdot1ConfigPortVlanEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.1.1 |
lldpV2Xdot1ConfigPortVlanTxEnableThe lldpV2Xdot1ConfigPortVlanTxEnable, which is defined
as a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a given LLDP
transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.1.1.1.1 |
lldpV2Xdot1ConfigVlanNameTableThe table that controls selection of LLDP VLAN name TLV
instances to be transmitted on individual ports. SEQUENCE OF LldpV2Xdot1ConfigVlanNameEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.2 |
lldpV2Xdot1ConfigVlanNameEntryLLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
VLAN name instance is transmitted.
This configuration object augments the lldpV2LocVlanEntry,
therefore it is only present along with the VLAN Name
instance contained in the associated lldpV2LocVlanNameEntry
entry.
Each active lldpV2Xdot1ConfigVlanNameEntry is restored
from non-volatile storage (along with the corresponding
lldpV2Xdot1LocVlanNameEntry) after a re-initialization of
the management system. LldpV2Xdot1ConfigVlanNameEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.2.1 |
lldpV2Xdot1ConfigVlanNameTxEnableThe boolean value that indicates whether the corresponding
Local System VLAN name instance is transmitted on the
port defined by the given lldpV2Xdot1LocVlanNameEntry.
The value of this object is restored from non-volatile
storage after a re-initialization of the management
system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.1.2.1.1 |
lldpV2Xdot1ConfigProtoVlanTableThe table that controls selection of LLDP Port and
Protocol VLAN ID TLV instances to be transmitted on
individual ports. SEQUENCE OF LldpV2Xdot1ConfigProtoVlanEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.3 |
lldpV2Xdot1ConfigProtoVlanEntryLLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol VLAN instance is transmitted.
This configuration object augments the
lldpV2Xdot1LocVlanEntry, therefore it is only present along
with the Port and Protocol VLAN ID instance contained in
the associated lldpV2Xdot1LocVlanEntry entry.
Each active lldpV2Xdot1ConfigProtoVlanEntry is restored
from non-volatile storage (along with the corresponding
lldpV2Xdot1LocProtoVlanEntry) after a re-initialization of
the management system. LldpV2Xdot1ConfigProtoVlanEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1 |
lldpV2Xdot1ConfigProtoVlanTxEnableThe boolean value that indicates whether the corresponding
Local System Port and Protocol VLAN instance is
transmitted on the port defined by the given
lldpV2Xdot1LocProtoVlanEntry.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1.1 |
lldpV2Xdot1ConfigProtocolTableThe table that controls selection of LLDP Protocol
TLV instances to be transmitted on individual ports. SEQUENCE OF LldpV2Xdot1ConfigProtocolEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.4 |
lldpV2Xdot1ConfigProtocolEntryLLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol instance is transmitted.
This configuration object augments the
lldpV2Xdot1LocProtoEntry, therefore it is only present
along with the Protocol instance contained in the
associated lldpV2Xdot1LocProtoEntry entry.
Each active lldpV2Xdot1ConfigProtocolEntry is restored
from non-volatile storage (along with the corresponding
lldpV2Xdot1LocProtocolEntry) after a re-initialization of
the management system. LldpV2Xdot1ConfigProtocolEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.4.1 |
lldpV2Xdot1ConfigProtocolTxEnableThe boolean value that indicates whether the corresponding
Local System Protocol Identity instance is transmitted
on the port defined by the given
lldpV2Xdot1LocProtocolEntry.
The value of this object is restored from non-volatile
storage after a re-initialization of the management
system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.1.4.1.1 |
lldpV2Xdot1ConfigVidUsageDigestTableA table that controls selection of LLDP VID Usage Digest
TLVs to be transmitted on individual ports. SEQUENCE OF LldpV2Xdot1ConfigVidUsageDigestEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.5 |
lldpV2Xdot1ConfigVidUsageDigestEntryLLDP configuration information that specifies the set of
ports (represented as a PortList) on which the local
system VID Usage Digest instance will be transmitted.
This configuration object augments the
lldpLocVidUsageDigestEntry, therefore it is only present
along with the VID Usage Digest instance
contained in the associated lldpV2Xdot1LocVidUsageDigestEntry
entry. Each active lldpConfigVidUsageDigestEntry must be
restored from non-volatile storage and re-created (along with
the corresponding lldpV2Xdot1LocVidUsageDigestEntry) after
a re-initialization of the management system. LldpV2Xdot1ConfigVidUsageDigestEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.5.1 |
lldpV2Xdot1ConfigVidUsageDigestTxEnableThe boolean value that indicates whether the corresponding
Local System VID Usage Digest instance will be transmitted
on the port defined by the given
lldpV2Xdot1LocVidUsageDigestEntry. The value of this object
must be restored from non-volatile storage after a
reinitialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.1.5.1.1 |
lldpV2Xdot1ConfigManVidTableA table that controls selection of LLDP Management VID
TLVs to be transmitted on individual ports. SEQUENCE OF LldpV2Xdot1ConfigManVidEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.6 |
lldpV2Xdot1ConfigManVidEntryLLDP configuration information that specifies the set of
port/destination address pairs on which the Local
System Management VID will be transmitted.
This configuration object augments the
lldpV2Xdot1LocManVidEntry, therefore it is
only present along with the Management VID contained
in the associated lldpV2Xdot1LocManVidEntry entry.
Each active lldpV2Xdot1ConfigManVidEntry must be
restored from non-volatile storage (along with the
corresponding lldpV2Xdot1LocManVidEntry) after a
re-initialization of the management system. LldpV2Xdot1ConfigManVidEntry .1.3.111.2.802.1.1.13.1.5.32962.1.1.6.1 |
lldpV2Xdot1ConfigManVidTxEnableThe lldpV2Xdot1ConfigManVidTxEnable, which is defined as a
truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally
defined Management VID TLV transmission is allowed on a given
LLDP transmission capable port.
The value of this object must be restored from
non-volatile storage after a re-initialization of the
management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.1.6.1.1 |
lldpV2Xdot1LocalData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.1.2 |
lldpV2Xdot1LocTableThis table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent. SEQUENCE OF LldpV2Xdot1LocEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.1 |
lldpV2Xdot1LocEntryInformation about IEEE 802.1 organizationally defined
LLDP extension. LldpV2Xdot1LocEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.1.1 |
lldpV2Xdot1LocPortVlanIdThe integer value used to identify the port's VLAN
identifier associated with the local system. A value
of zero shall be used if the system either does not know
the PVID or does
not support port-based VLAN operation.ro Unsigned32(0|1..4094) .1.3.111.2.802.1.1.13.1.5.32962.1.2.1.1.1 |
lldpV2Xdot1LocProtoVlanTableThis table contains one or more rows per Port and Protocol
VLAN information about the local system. SEQUENCE OF LldpV2Xdot1LocProtoVlanEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.2 |
lldpV2Xdot1LocProtoVlanEntryPort and protocol VLAN ID Information about a particular
port component. There may be multiple port and protocol
VLANs, identified by a particular
lldpV2Xdot1LocProtoVlanId, configured on the given port. LldpV2Xdot1LocProtoVlanEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1 |
lldpV2Xdot1LocProtoVlanIdThe integer value used to identify the port and protocol
VLANs associated with the given port associated with the
local system. A value of zero shall be used if the system
either does not know the protocol VLAN ID (PPVID) or does
not support port and protocol VLAN operation. Unsigned32(0|1..4094) .1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.1 |
lldpV2Xdot1LocProtoVlanSupportedThe truth value used to indicate whether the given port
(associated with the local system) supports port and
protocol VLANs.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.2 |
lldpV2Xdot1LocProtoVlanEnabledThe truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated
with the local system.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.3 |
lldpV2Xdot1LocVlanNameTableThis table contains one or more rows per IEEE 802.1Q VLAN
name information on the local system known to this agent. SEQUENCE OF LldpV2Xdot1LocVlanNameEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.3 |
lldpV2Xdot1LocVlanNameEntryVLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpV2Xdot1LocVlanId, configured on the given port. LldpV2Xdot1LocVlanNameEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1 |
lldpV2Xdot1LocVlanIdThe integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible. VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1.1 |
lldpV2Xdot1LocVlanNameThe string value used to identify VLAN name identified
by the Vlan Id associated with the given port on the
local system.
This object should contain the value of the
dot1QVLANStaticName object (defined in IETF RFC 4363)
identified with the given lldpV2Xdot1LocVlanId.ro SnmpAdminString .1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1.2 |
lldpV2Xdot1LocProtocolTableThis table contains one or more rows per protocol identity
information on the local system known to this agent. SEQUENCE OF LldpV2Xdot1LocProtocolEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.4 |
lldpV2Xdot1LocProtocolEntryInformation about particular protocols that are accessible
through the given port component.
There may be multiple protocols, identified by particular
lldpV2Xdot1ProtocolIndex, lldpV2LocPortIfIndex LldpV2Xdot1LocProtocolEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1 |
lldpV2Xdot1LocProtocolIndexThis object represents an arbitrary local integer value
used by this agent to identify a particular protocol
identity. Unsigned32 .1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1.1 |
lldpV2Xdot1LocProtocolIdThe octet string value used to identify the protocols
associated with the given port of the local system.ro OCTET STRING .1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1.2 |
lldpV2Xdot1LocVidUsageDigestTableThis table contains one row per ifIndex/
destination MAC address pair for usage digest
information on the local system known to this agent. SEQUENCE OF LldpV2Xdot1LocVidUsageDigestEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.5 |
lldpV2Xdot1LocVidUsageDigestEntryUsage digest information to be transmitted
through the given port. LldpV2Xdot1LocVidUsageDigestEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.5.1 |
lldpV2Xdot1LocVidUsageDigestThe integer value obtained by applying the CRC32 function
to the 128-octet VID Usage Table. A bit of the VID Usage
Table contains the value PBB-TE-USAGE (binary 1) if the
corresponding element of the MST Configuration Table
(IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID
(hex FFE) and otherwise contains the value NON-PBB-TE-USAGE
(binary 0).ro Unsigned32 .1.3.111.2.802.1.1.13.1.5.32962.1.2.5.1.1 |
lldpV2Xdot1LocManVidTableThis table contains one row per ifIndex/
destination MAC address pair for usage digest
information on the local system known to this agent. SEQUENCE OF LldpV2Xdot1LocManVidEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.6 |
lldpV2Xdot1LocManVidEntryUsage digest information to be transmitted
through the given port. LldpV2Xdot1LocManVidEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.6.1 |
lldpV2Xdot1LocManVidThe integer value configured on the Local system for
the Management VID, or
the value 0 if a Management VID has not been provisioned.ro Unsigned32 (0|1..4094) .1.3.111.2.802.1.1.13.1.5.32962.1.2.6.1.1 |
lldpV2Xdot1LocLinkAggTableThis table contains one row per port of link aggregation
information (as a part of the LLDP 802.1 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpV2Xdot1LocLinkAggEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.7 |
lldpV2Xdot1LocLinkAggEntryLink Aggregation information about a particular port
component. LldpV2Xdot1LocLinkAggEntry .1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1 |
lldpV2Xdot1LocLinkAggStatusThe bitmap value contains the link aggregation
capabilities and the current aggregation status of the
link.ro LldpV2LinkAggStatusMap (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1.1 |
lldpV2Xdot1LocLinkAggPortIdThis object contains the IEEE 802.1 aggregated port
identifier, aAggPortID (IEEE Std 802.1AX, 6.3.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.
If the port is not in link aggregation state and/or it
does not support link aggregation, this value should be set
to zero.ro Unsigned32(0|1..2147483647) .1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1.2 |
lldpV2Xdot1RemoteData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.1.3 |
lldpV2Xdot1RemTableThis table contains one or more rows per physical network
connection known to this agent. The agent may wish to
ensure that only one lldpV2Xdot1RemEntry is present for
each local port, or it may choose to maintain multiple
lldpV2Xdot1RemEntries for the same local port. SEQUENCE OF LldpV2Xdot1RemEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.1 |
lldpV2Xdot1RemEntryInformation about a particular port component. LldpV2Xdot1RemEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.1.1 |
lldpV2Xdot1RemPortVlanIdThe integer value used to identify the port's VLAN
identifier associated with the remote system. if the
remote system either does not know the PVID or does not
support port-based VLAN operation, the value of
lldpV2Xdot1RemPortVlanId should be zero.ro Unsigned32(0|1..4094) .1.3.111.2.802.1.1.13.1.5.32962.1.3.1.1.1 |
lldpV2Xdot1RemProtoVlanTableThis table contains one or more rows per Port and Protocol
VLAN information about the remote system, received on the
given port. SEQUENCE OF LldpV2Xdot1RemProtoVlanEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.2 |
lldpV2Xdot1RemProtoVlanEntryPort and protocol VLAN name Information about a particular
port component. There may be multiple protocol VLANs,
identified by a particular lldpV2Xdot1RemProtoVlanId,
configured on the remote system. LldpV2Xdot1RemProtoVlanEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1 |
lldpV2Xdot1RemProtoVlanIdThe integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.
If port and protocol VLANs are not supported on the given
port associated with the remote system, or if the port is
not enabled with any port and protocol VLAN, the value of
lldpV2Xdot1RemProtoVlanId should be zero. Unsigned32(0|1..4094) .1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.1 |
lldpV2Xdot1RemProtoVlanSupportedThe truth value used to indicate whether the given port
(associated with the remote system) is capable of
supporting port and protocol VLANs.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.2 |
lldpV2Xdot1RemProtoVlanEnabledThe truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated
with
the remote system.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.3 |
lldpV2Xdot1RemVlanNameTableThis table contains one or more rows per IEEE 802.1Q VLAN
name information about the remote system, received on the
given port. SEQUENCE OF LldpV2Xdot1RemVlanNameEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.3 |
lldpV2Xdot1RemVlanNameEntryVLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpV2Xdot1RemVlanId, received on the given port. LldpV2Xdot1RemVlanNameEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1 |
lldpV2Xdot1RemVlanIdThe integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port of the remote system
is compatible. VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1.1 |
lldpV2Xdot1RemVlanNameThe string value used to identify VLAN name identified
by the VLAN Id associated with the remote system.ro SnmpAdminString .1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1.2 |
lldpV2Xdot1RemProtocolTableThis table contains one or more rows per protocol
information about the remote system, received on
the given port. SEQUENCE OF LldpV2Xdot1RemProtocolEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.4 |
lldpV2Xdot1RemProtocolEntryProtocol information about a particular port component.
There may be multiple protocols, identified by a particular
lldpV2Xdot1ProtocolIndex, received on the given port. LldpV2Xdot1RemProtocolEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1 |
lldpV2Xdot1RemProtocolIndexThis object represents an arbitrary local integer value
used by this agent to identify a particular protocol
identity. Unsigned32 .1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1.1 |
lldpV2Xdot1RemProtocolIdThe octet string value used to identify the protocols
associated with the given port of remote system.ro OCTET STRING .1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1.2 |
lldpV2Xdot1RemVidUsageDigestTableThis table contains one row per ifIndex/
destination MAC address pair for usage digest
information received by the local system. SEQUENCE OF LldpV2Xdot1RemVidUsageDigestEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.5 |
lldpV2Xdot1RemVidUsageDigestEntryUsage digest information received on
the given port/destination address pair. LldpV2Xdot1RemVidUsageDigestEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.5.1 |
lldpV2Xdot1RemVidUsageDigestThe integer value obtained by applying the CRC32 function
to the 128-octet VID Usage Table. A bit of the VID Usage
Table contains the value PBB-TE-USAGE (binary 1) if the
corresponding element of the MST Configuration Table
(IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID
(hex FFE)and otherwise contains the value NON-PBB-TE-USAGE
(binary 0).ro Unsigned32 .1.3.111.2.802.1.1.13.1.5.32962.1.3.5.1.1 |
lldpV2Xdot1RemManVidTableThis table contains one row per ifIndex/
destination MAC address pair for management VID
information received from remote systems. SEQUENCE OF LldpV2Xdot1RemManVidEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.6 |
lldpV2Xdot1RemManVidEntryManagement VID information received
through the given port/destination address pair. LldpV2Xdot1RemManVidEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.6.1 |
lldpV2Xdot1RemManVidThe integer value configured on a system for
the Management VID, or
the value 0 if a Management VID has not been provisioned.ro Unsigned32 (0|1..4094) .1.3.111.2.802.1.1.13.1.5.32962.1.3.6.1.1 |
lldpV2Xdot1RemLinkAggTableThis table contains port link aggregation information
(as a part of the LLDP IEEE 802.1 organizational extension)
of the remote system. SEQUENCE OF LldpV2Xdot1RemLinkAggEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.7 |
lldpV2Xdot1RemLinkAggEntryLink Aggregation information about remote system's port
component. LldpV2Xdot1RemLinkAggEntry .1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1 |
lldpV2Xdot1RemLinkAggStatusThe bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.ro LldpV2LinkAggStatusMap (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1.1 |
lldpV2Xdot1RemLinkAggPortIdThis object contains the IEEE 802.1 aggregated port
identifier, aAggPortID (IEEE Std 802.1AX, 6.3.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
If the remote port is not in link aggregation state and/or
it does not support link aggregation, this value should be
zero.ro Unsigned32(0|1..2147483647) .1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1.2 |
lldpV2Xdot1Conformance OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.2 |
lldpV2Xdot1Compliances OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.2.1 |
lldpV2Xdot1Groups OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.2.2 |
lldpXdot1CnMIB OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.3 |
lldpXdot1CnObjects OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.3.1 |
lldpXdot1CnConfig OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.3.1.1 |
lldpXdot1CnConfigCnTableA table that controls selection of Congestion Notification
TLVs to be transmitted on individual ports. SEQUENCE OF LldpXdot1CnConfigCnEntry .1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1 |
lldpXdot1CnConfigCnEntryLLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined
Congestion Notification TLV on LLDP transmission capable ports.
This configuration object augments the lldpV2PortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpV2PortConfigEntry
entry.
Each active lldpConfigEntry is restored from non-volatile
storage (along with the corresponding lldpV2PortConfigEntry)
after a re-initialization of the management system. LldpXdot1CnConfigCnEntry .1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1.1 |
lldpXdot1CnConfigCnTxEnableThe lldpXdot1CnConfigCnTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
defined Congestion Notification TLV transmission is allowed
on a given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1.1.1 |
lldpXdot1CnLocalData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.3.1.2 |
lldpV2Xdot1LocCnTableThis table contains one row per port of Congestion
Notification information (as a part of the LLDP
802.1 organizational extension) on the local system
known to this agent. SEQUENCE OF LldpV2Xdot1LocCnEntry .1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1 |
lldpV2Xdot1LocCnEntryCongestion Notification information about a
particular port component. LldpV2Xdot1LocCnEntry .1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1 |
lldpV2Xdot1LocCNPVIndicatorsThis object contains the CNPV indicators
for the Port.ro LldpV2CnBitVector .1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1.1 |
lldpV2Xdot1LocReadyIndicatorsThis object contains the Ready indicators
for the Port.ro LldpV2CnBitVector .1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1.2 |
lldpXdot1CnRemoteData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.3.1.3 |
lldpV2Xdot1RemCnTableThis table contains Congestion Notification information
(as a part of the LLDP IEEE 802.1 organizational extension)
of the remote system. SEQUENCE OF LldpV2Xdot1RemCnEntry .1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1 |
lldpV2Xdot1RemCnEntryPort Extension information about remote systems port
component. LldpV2Xdot1RemCnEntry .1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1 |
lldpV2Xdot1RemCNPVIndicatorsThis object contains the CNPV indicators
for the Port.ro LldpV2CnBitVector .1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1.1 |
lldpV2Xdot1RemReadyIndicatorsThis object contains the Ready indicators
for the Port.ro LldpV2CnBitVector .1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1.2 |
lldpXdot1CnConformance OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.4 |
lldpXdot1CnCompliances OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.4.1 |
lldpXdot1CnGroups OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.4.2 |
lldpXdot1dcbxMIB OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5 |
lldpXdot1dcbxObjects OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1 |
lldpXdot1dcbxConfig OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.1 |
lldpXdot1dcbxConfigETSConfigurationTableA table that controls selection of ETS Configuration
TLVs to be transmitted on individual ports. SEQUENCE OF LldpXdot1dcbxConfigETSConfigurationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1 |
lldpXdot1dcbxConfigETSConfigurationEntryLLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined
ETS Configuration TLV on LLDP transmission capable ports.
This configuration object augments the lldpV2PortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpV2PortConfigEntry
entry.
Each active lldpConfigEntry is restored from non-volatile
storage (along with the corresponding lldpV2PortConfigEntry)
after a re-initialization of the management system. LldpXdot1dcbxConfigETSConfigurationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1.1 |
lldpXdot1dcbxConfigETSConfigurationTxEnableThe lldpXdot1dcbxConfigETSConfigurationTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
defined ETS Configuration TLV transmission is allowed on a
given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1.1.1 |
lldpXdot1dcbxConfigETSRecommendationTableA table that controls selection of ETS Recommendation
TLVs to be transmitted on individual ports. SEQUENCE OF LldpXdot1dcbxConfigETSRecommendationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2 |
lldpXdot1dcbxConfigETSRecommendationEntryLLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined
ETS Recommendation TLV on LLDP transmission capable ports.
This configuration object augments the lldpV2PortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpV2PortConfigEntry
entry.
Each active lldpConfigEntry is restored from non-volatile
storage (along with the corresponding lldpV2PortConfigEntry)
after a re-initialization of the management system. LldpXdot1dcbxConfigETSRecommendationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2.1 |
lldpXdot1dcbxConfigETSRecommendationTxEnableThe lldpXdot1dcbxConfigETSRecommendationTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
defined ETS Recommendation TLV transmission is allowed on a
given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2.1.1 |
lldpXdot1dcbxConfigPFCTableA table that controls selection of Priority-based
Flow Control TLVs to be transmitted on individual ports. SEQUENCE OF LldpXdot1dcbxConfigPFCEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3 |
lldpXdot1dcbxConfigPFCEntryLLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined
Priority-based Flow Control TLV on LLDP transmission
capable ports.
This configuration object augments the lldpV2PortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpV2PortConfigEntry
entry.
Each active lldpConfigEntry is restored from non-volatile
storage (along with the corresponding lldpV2PortConfigEntry)
after a re-initialization of the management system. LldpXdot1dcbxConfigPFCEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3.1 |
lldpXdot1dcbxConfigPFCTxEnableThe lldpXdot1dcbxConfigPFCTxEnable, which is defined
as a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
Priority-based Flow Control TLV transmission is allowed on
a given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3.1.1 |
lldpXdot1dcbxConfigApplicationPriorityTableA table that controls selection of Priority-based
Flow Control TLVs to be transmitted on individual ports. SEQUENCE OF LldpXdot1dcbxConfigApplicationPriorityEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4 |
lldpXdot1dcbxConfigApplicationPriorityEntryLLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined
Application Priority TLV on LLDP transmission capable ports.
This configuration object augments the lldpV2PortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpV2PortConfigEntry
entry.
Each active lldpConfigEntry is restored from non-volatile
storage (along with the corresponding lldpV2PortConfigEntry)
after a re-initialization of the management system. LldpXdot1dcbxConfigApplicationPriorityEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4.1 |
lldpXdot1dcbxConfigApplicationPriorityTxEnableThe lldpXdot1dcbxConfigApplicationPriorityTxEnable, which
is defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
defined Application Priority TLV transmission is allowed on
a given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4.1.1 |
lldpXdot1dcbxLocalData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.2 |
lldpXdot1dcbxLocETSConfiguration OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1 |
lldpXdot1dcbxLocETSBasicConfigurationTableThis table contains one row per port for the IEEE 802.1
organizationally defined LLDP ETS Configuration TLV on
the local system known to this agent SEQUENCE OF LldpXdot1dcbxLocETSBasicConfigurationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1 |
lldpXdot1dcbxLocETSBasicConfigurationEntryInformation about the IEEE 802.1 organizational defined
ETS Configuration TLV LLDP extension. LldpXdot1dcbxLocETSBasicConfigurationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1 |
lldpXdot1dcbxLocETSConCreditBasedShaperSupportIndicates if the credit-based shaper Traffic Selection
Algorithm is supported on the local system.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.1 |
lldpXdot1dcbxLocETSConTrafficClassesSupportedIndicates the number of traffic classes supported.ro LldpXdot1dcbxSupportedCapacity .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.2 |
lldpXdot1dcbxLocETSConWillingIndicates if the local system is willing to accept the
ETS configuration recommended by the remote system.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.3 |
lldpXdot1dcbxLocETSConPriorityAssignmentTableThis table contains one row per priority. The entry in each
row indicates the traffic class to which the priority is
assigned. SEQUENCE OF LldpXdot1dcbxLocETSConPriorityAssignmentEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2 |
lldpXdot1dcbxLocETSConPriorityAssignmentEntryIndicates a priority to traffic class assignment. LldpXdot1dcbxLocETSConPriorityAssignmentEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1 |
lldpXdot1dcbxLocETSConPriorityIndicates the priority that is assigned to a traffic
class. IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1.1 |
lldpXdot1dcbxLocETSConPriTrafficClassIndicates the traffic class to which this priority is
to be assigned.ro LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1.2 |
lldpXdot1dcbxLocETSConTrafficClassBandwidthTableThis table contains one row per traffic class. The
entry in each row indicates the traffic class to
which the bandwidth is assigned. SEQUENCE OF LldpXdot1dcbxLocETSConTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3 |
lldpXdot1dcbxLocETSConTrafficClassBandwidthEntryIndicates a traffic class to Bandwidth assignment. LldpXdot1dcbxLocETSConTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1 |
lldpXdot1dcbxLocETSConTrafficClassIndicates the traffic class to
which this bandwidth applies LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1.1 |
lldpXdot1dcbxLocETSConTrafficClassBandwidthIndicates the bandwidth assigned to this traffic class.ro LldpXdot1dcbxTrafficClassBandwidthValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1.2 |
lldpXdot1dcbxLocETSConTrafficSelectionAlgorithmTableThis table contains one row per traffic class. The entry
in each row indicates the traffic selction algorithm to be
used by the traffic class. SEQUENCE OF LldpXdot1dcbxLocETSConTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4 |
lldpXdot1dcbxLocETSConTrafficSelectionAlgorithmEntryIndicates a traffic class to traffic selection algorithm
assignment. LldpXdot1dcbxLocETSConTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1 |
lldpXdot1dcbxLocETSConTSATrafficClassIndicates the traffic class that is assigned to a traffic
selection algorithm. LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1.1 |
lldpXdot1dcbxLocETSConTrafficSelectionAlgorithmIndicates the Traffic Selection Algorithm to which this
traffic class is to be assigned.ro LldpXdot1dcbxTrafficSelectionAlgorithm .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1.2 |
lldpXdot1dcbxLocETSReco OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2 |
lldpXdot1dcbxLocETSRecoTrafficClassBandwidthTableThis table contains one row per traffic class. The
entry in each row indicates the traffic class to
which the bandwidth is assigned. SEQUENCE OF LldpXdot1dcbxLocETSRecoTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1 |
lldpXdot1dcbxLocETSRecoTrafficClassBandwidthEntryIndicates a traffic class to Bandwidth assignment. LldpXdot1dcbxLocETSRecoTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1 |
lldpXdot1dcbxLocETSRecoTrafficClassIndicates the traffic class to
which this bandwidth applies LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1.1 |
lldpXdot1dcbxLocETSRecoTrafficClassBandwidthIndicates the bandwidth assigned to this traffic class.ro LldpXdot1dcbxTrafficClassBandwidthValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1.2 |
lldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmTableThis table contains one row per priority. The entry in each
row indicates the traffic selction algorithm to be used
by the traffic class. SEQUENCE OF LldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2 |
lldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmEntryIndicates a priority to traffic selection algorithm
assignment. LldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1 |
lldpXdot1dcbxLocETSRecoTSATrafficClassIndicates the traffic class that is assigned to a traffic
selection algorithm. LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1.1 |
lldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmIndicates the Traffic Selection Algorithm to which this
traffic class is to be assigned.ro LldpXdot1dcbxTrafficSelectionAlgorithm .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1.2 |
lldpXdot1dcbxLocPFC OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3 |
lldpXdot1dcbxLocPFCBasicTableThis table contains one row per port for the IEEE 802.1
organizationally defined LLDP PFC TLV on the local
system known to this agent SEQUENCE OF LldpXdot1dcbxLocPFCBasicEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1 |
lldpXdot1dcbxLocPFCBasicEntryInformation about the IEEE 802.1 organizational defined
PFC TLV LLDP extension. LldpXdot1dcbxLocPFCBasicEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1 |
lldpXdot1dcbxLocPFCWillingIndicates if the local system is willing to accept the
PFC configuration of the remote system.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.1 |
lldpXdot1dcbxLocPFCMBCIndicates if the local system is capable of bypassing
MACsec processing when MACsec is disabled.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.2 |
lldpXdot1dcbxLocPFCCapIndicates the number of traffic classes on the local device
that may simultaneously have PFC enabled.ro LldpXdot1dcbxSupportedCapacity .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.3 |
lldpXdot1dcbxLocPFCEnableTableThis table contains eight entries, one entry per priority,
indicating if PFC is enabled on the corresponding priority. SEQUENCE OF LldpXdot1dcbxLocPFCEnableEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2 |
lldpXdot1dcbxLocPFCEnableEntryEach entry indicates if PFC is enabled on the
correponding priority LldpXdot1dcbxLocPFCEnableEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1 |
lldpXdot1dcbxLocPFCEnablePriorityPrioity for which PFC is enabled / disabled IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1.1 |
lldpXdot1dcbxLocPFCEnableEnabledIndicates if PFC is enabled on the corresponding priorityro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1.2 |
lldpXdot1dcbxLocApplicationPriorityAppTableTable containing entries indicating the priorty to be used
for a given application SEQUENCE OF LldpXdot1dcbxLocApplicationPriorityAppEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4 |
lldpXdot1dcbxLocApplicationPriorityAppEntryEntry that indicates the priority to be used for a
given application. LldpXdot1dcbxLocApplicationPriorityAppEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1 |
lldpXdot1dcbxLocApplicationPriorityAESelectorIndicates the contents of the protocol object
(lldpXdot1dcbxLocApplicationPriorityAEProtocol)
1: Ethertype
2: Well Known Port number over TCP, or SCTP
3: Well Known Port number over UDP, or DCCP
4: Well Known Port number over TCP, SCTP, UDP, and DCCP LldpXdot1dcbxAppSelector .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.1 |
lldpXdot1dcbxLocApplicationPriorityAEProtocolThe protocol indicator of the type indicated by
lldpXdot1dcbxLocApplicationPriorityAESelector. LldpXdot1dcbxAppProtocol .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.2 |
lldpXdot1dcbxLocApplicationPriorityAEPriorityThe priority code point that should be used in
frames transporting the protocol indicated by
lldpXdot1dcbxLocApplicationPriorityAESelector and
lldpXdot1dcbxLocApplicationPriorityAEProtocolro IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.3 |
lldpXdot1dcbxRemoteData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.3 |
lldpXdot1dcbxRemETSConfiguration OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1 |
lldpXdot1dcbxRemETSBasicConfigurationTableThis table contains one row per port for the IEEE 802.1
organizationally defined LLDP ETS Configuration TLV on
the local system known to this agent SEQUENCE OF LldpXdot1dcbxRemETSBasicConfigurationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1 |
lldpXdot1dcbxRemETSBasicConfigurationEntryInformation about the IEEE 802.1 organizational defined
ETS Configuration TLV LLDP extension. LldpXdot1dcbxRemETSBasicConfigurationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1 |
lldpXdot1dcbxRemETSConCreditBasedShaperSupportIndicates if the credit-based shaper Traffic Selection
algorithm is supported on the remote system.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.1 |
lldpXdot1dcbxRemETSConTrafficClassesSupportedIndicates the number of traffic classes supported.ro LldpXdot1dcbxSupportedCapacity .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.2 |
lldpXdot1dcbxRemETSConWillingIndicates if the remote system is willing to accept the
ETS configuration recommended by the remote system.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.3 |
lldpXdot1dcbxRemETSConPriorityAssignmentTableThis table contains one row per priority. The entry in
each row indicates the traffic class to which the
priority is assigned. SEQUENCE OF LldpXdot1dcbxRemETSConPriorityAssignmentEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2 |
lldpXdot1dcbxRemETSConPriorityAssignmentEntryIndicates a priority to traffic class assignment. LldpXdot1dcbxRemETSConPriorityAssignmentEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1 |
lldpXdot1dcbxRemETSConPriorityIndicates the priority that is assigned to a traffic
class. IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1.1 |
lldpXdot1dcbxRemETSConPriTrafficClassIndicates the traffic class to which this priority is
to be assigned.ro LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1.2 |
lldpXdot1dcbxRemETSConTrafficClassBandwidthTableThis table contains one row per traffic class. The
entry in each row indicates the traffic class to
which the bandwidth is assigned. SEQUENCE OF LldpXdot1dcbxRemETSConTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3 |
lldpXdot1dcbxRemETSConTrafficClassBandwidthEntryIndicates a traffic class to Bandwidth assignment. LldpXdot1dcbxRemETSConTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1 |
lldpXdot1dcbxRemETSConTrafficClassIndicates the traffic class to
which this bandwidth applies LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1.1 |
lldpXdot1dcbxRemETSConTrafficClassBandwidthIndicates the bandwidth assigned to this traffic class.ro LldpXdot1dcbxTrafficClassBandwidthValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1.2 |
lldpXdot1dcbxRemETSConTrafficSelectionAlgorithmTableThis table contains one row per traffic class. The
entry in each row indicates the traffic selction
algorithm to be used by the traffic class. SEQUENCE OF LldpXdot1dcbxRemETSConTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4 |
lldpXdot1dcbxRemETSConTrafficSelectionAlgorithmEntryIndicates a traffic class to traffic selection
algorithm assignment. LldpXdot1dcbxRemETSConTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1 |
lldpXdot1dcbxRemETSConTSATrafficClassIndicates the traffic class that is assigned to a traffic
selection algorithm. LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1.1 |
lldpXdot1dcbxRemETSConTrafficSelectionAlgorithmIndicates the Traffic Selection Algorithm to which this
traffic class is to be assigned.ro LldpXdot1dcbxTrafficSelectionAlgorithm .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1.2 |
lldpXdot1dcbxRemETSReco OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2 |
lldpXdot1dcbxRemETSRecoTrafficClassBandwidthTableThis table contains one row per traffic class. The
entry in each row indicates the traffic class to
which the bandwidth is assigned. SEQUENCE OF LldpXdot1dcbxRemETSRecoTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1 |
lldpXdot1dcbxRemETSRecoTrafficClassBandwidthEntryIndicates a traffic class to Bandwidth assignment. LldpXdot1dcbxRemETSRecoTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1 |
lldpXdot1dcbxRemETSRecoTrafficClassIndicates the traffic class to
which this bandwidth applies LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1.1 |
lldpXdot1dcbxRemETSRecoTrafficClassBandwidthIndicates the bandwidth assigned to this traffic class.ro LldpXdot1dcbxTrafficClassBandwidthValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1.2 |
lldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmTableThis table contains one row per traffic class. The
entry in each row indicates the traffic selction
algorithm to be used by the priority. SEQUENCE OF LldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2 |
lldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmEntryIndicates a priority to traffic selection algorithm
assignment. LldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1 |
lldpXdot1dcbxRemETSRecoTSATrafficClassIndicates the traffic class that is assigned to a traffic
selection algorithm. LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1.1 |
lldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmIndicates the Traffic Selection Algorithm to which this
traffic class is to be assigned.ro LldpXdot1dcbxTrafficSelectionAlgorithm .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1.2 |
lldpXdot1dcbxRemPFC OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3 |
lldpXdot1dcbxRemPFCBasicTableThis table contains one row per port for the IEEE 802.1
organizationally defined LLDP PFC TLV on the local
system known to this agent SEQUENCE OF LldpXdot1dcbxRemPFCBasicEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1 |
lldpXdot1dcbxRemPFCBasicEntryInformation about the IEEE 802.1 organizational defined
PFC TLV LLDP extension. LldpXdot1dcbxRemPFCBasicEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1 |
lldpXdot1dcbxRemPFCWillingIndicates if the remote system is willing to accept the
PFC configuration of the local system.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.1 |
lldpXdot1dcbxRemPFCMBCIndicates if the remote system is capable of bypassing
MACsec processing when MACsec is disabled.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.2 |
lldpXdot1dcbxRemPFCCapIndicates the number of traffic classes on the remote device
that may simultaneously have PFC enabled.ro LldpXdot1dcbxSupportedCapacity .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.3 |
lldpXdot1dcbxRemPFCEnableTableThis table contains eight entries, one entry per priority,
indicating if PFC is enabled on the corresponding priority. SEQUENCE OF LldpXdot1dcbxRemPFCEnableEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2 |
lldpXdot1dcbxRemPFCEnableEntryEach entry indicates if PFC is enabled on the
correponding priority LldpXdot1dcbxRemPFCEnableEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1 |
lldpXdot1dcbxRemPFCEnablePriorityPrioity for which PFC is enabled / disabled IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1.1 |
lldpXdot1dcbxRemPFCEnableEnabledIndicates if PFC is enabled on the corresponding priorityro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1.2 |
lldpXdot1dcbxRemApplicationPriorityAppTableTable containing entries indicating the priorty to be used
for a given application SEQUENCE OF LldpXdot1dcbxRemApplicationPriorityAppEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4 |
lldpXdot1dcbxRemApplicationPriorityAppEntryEntry that indicates the priority to be used for a
given application. LldpXdot1dcbxRemApplicationPriorityAppEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1 |
lldpXdot1dcbxRemApplicationPriorityAESelectorIndicates the contents of the protocol object
(lldpXdot1dcbxRemApplicationPriorityAEProtocol)
1: Ethertype
2: Well Known Port number over TCP, or SCTP
3: Well Known Port number over UDP, or DCCP
4: Well Known Port number over TCP, SCTP, UDP, and DCCP LldpXdot1dcbxAppSelector .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.1 |
lldpXdot1dcbxRemApplicationPriorityAEProtocolThe protocol indicator of the type indicated by
lldpXdot1dcbxRemApplicationPriorityAESelector. LldpXdot1dcbxAppProtocol .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.2 |
lldpXdot1dcbxRemApplicationPriorityAEPriorityThe priority code point that should be used in
frames transporting the protocol indicated by
lldpXdot1dcbxRemApplicationPriorityAESelector and
lldpXdot1dcbxRemApplicationPriorityAEProtocolro IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.3 |
lldpXdot1dcbxAdminData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.4 |
lldpXdot1dcbxAdminETSConfiguration OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1 |
lldpXdot1dcbxAdminETSBasicConfigurationTableThis table contains one row per port for the IEEE 802.1
organizationally defined LLDP ETS Configuration TLV
on the local system known to this agent SEQUENCE OF LldpXdot1dcbxAdminETSBasicConfigurationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1 |
lldpXdot1dcbxAdminETSBasicConfigurationEntryInformation about the IEEE 802.1 organizational defined
ETS Configuration TLV LLDP extension. LldpXdot1dcbxAdminETSBasicConfigurationEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1 |
lldpXdot1dcbxAdminETSConCreditBasedShaperSupportIndicates support for the credit-based shaper Traffic
Selection Algorithm.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.1 |
lldpXdot1dcbxAdminETSConTrafficClassesSupportedIndicates the number of traffic classes supported.ro LldpXdot1dcbxSupportedCapacity .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.2 |
lldpXdot1dcbxAdminETSConWillingIndicates if the local system is willing to accept the
ETS configuration recommended by the remote system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.3 |
lldpXdot1dcbxAdminETSConPriorityAssignmentTableThis table contains one row per priority. The entry in each
row indicates the traffic class to which the priority is
assigned. SEQUENCE OF LldpXdot1dcbxAdminETSConPriorityAssignmentEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2 |
lldpXdot1dcbxAdminETSConPriorityAssignmentEntryIndicates a priority to traffic class assignment. LldpXdot1dcbxAdminETSConPriorityAssignmentEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1 |
lldpXdot1dcbxAdminETSConPriorityIndicates the priority that is assigned to a traffic
class. IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1.1 |
lldpXdot1dcbxAdminETSConPriTrafficClassIndicates the traffic class to which this priority is
to be assigned.rw LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1.2 |
lldpXdot1dcbxAdminETSConTrafficClassBandwidthTableThis table contains one row per traffic class. The
entry in each row indicates the traffic class to
which the bandwidth is assigned. SEQUENCE OF LldpXdot1dcbxAdminETSConTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3 |
lldpXdot1dcbxAdminETSConTrafficClassBandwidthEntryIndicates a traffic class to Bandwidth assignment. LldpXdot1dcbxAdminETSConTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1 |
lldpXdot1dcbxAdminETSConTrafficClassIndicates the traffic class to
which this bandwidth applies LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.1 |
lldpXdot1dcbxAdminETSConTrafficClassBandwidthIndicates the bandwidth assigned to this traffic class.
The sum of the bandwidths assigned to a given port is
required at all times to eqaul 100. An operation that
attempts to change this table such that the bandwidth
entires do not total 100 shall be rejected. An implication
of this is that modification of this table requires that
multiple set operations be included in a single SNMP PDU,
commonly referred to as an MSET operation, to perform
simultaneous set operations to keep the sum at 100. Any
attempt to change a single entry in this table will result
in the operation being rejected since entries in the
table referring to the given port will no longer
sum to 100.rw LldpXdot1dcbxTrafficClassBandwidthValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.2 |
lldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmTableThis table contains one row per traffic class. The entry
in each row indicates the traffic selction algorithm to
be used by the priority. SEQUENCE OF LldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4 |
lldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmEntryIndicates a traffic class to traffic selection
algorithm assignment. LldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1 |
lldpXdot1dcbxAdminETSConTSATrafficClassIndicates the traffic class that is assigned
to a traffic selection algorithm. LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1.1 |
lldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmIndicates the Traffic Selection Algorithm to which this
traffic class is to be assigned.rw LldpXdot1dcbxTrafficSelectionAlgorithm .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1.2 |
lldpXdot1dcbxAdminETSReco OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2 |
lldpXdot1dcbxAdminETSRecoTrafficClassBandwidthTableThis table contains one row per traffic class. The
entry in each row indicates the traffic class to
which the bandwidth is assigned. SEQUENCE OF LldpXdot1dcbxAdminETSRecoTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1 |
lldpXdot1dcbxAdminETSRecoTrafficClassBandwidthEntryIndicates a traffic class to Bandwidth assignment. LldpXdot1dcbxAdminETSRecoTrafficClassBandwidthEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1 |
lldpXdot1dcbxAdminETSRecoTrafficClassIndicates the traffic class to
which this bandwidth applies LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1.1 |
lldpXdot1dcbxAdminETSRecoTrafficClassBandwidthIndicates the bandwidth assigned to this traffic class.
The sum of the bandwidths assigned to a given port is
required at all times to eqaul 100. An operation that
attempts to change this table such that the bandwidth
entires do not total 100 shall be rejected. An implication
of this is that modification of this table requires that
multiple set operations be included in a single SNMP PDU,
commonly referred to as an MSET operation, to perform
simultaneous set operations to keep the sum at 100. Any
attempt to change a single entry in this table will result
in the operation being rejected since entries in the
table referring to the given port will no longer
sum to 100.rw LldpXdot1dcbxTrafficClassBandwidthValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1.2 |
lldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmTableThis table contains one row per traffic class. The entry
in each row indicates the traffic selction algorithm to
be used by the traffic class. SEQUENCE OF LldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2 |
lldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmEntryIndicates a traffic class to traffic selection
algorithm assignment. LldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1 |
lldpXdot1dcbxAdminETSRecoTSATrafficClassIndicates the traffic class that is assigned to a traffic
selection algorithm. LldpXdot1dcbxTrafficClassValue .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1.1 |
lldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmIndicates the Traffic Selection Algorithm to which this
traffic class is to be assigned.rw LldpXdot1dcbxTrafficSelectionAlgorithm .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1.2 |
lldpXdot1dcbxAdminPFC OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3 |
lldpXdot1dcbxAdminPFCBasicTableThis table contains one row per port for the IEEE 802.1
organizationally defined LLDP PFC TLV on the local
system known to this agent SEQUENCE OF LldpXdot1dcbxAdminPFCBasicEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1 |
lldpXdot1dcbxAdminPFCBasicEntryInformation about the IEEE 802.1 organizational defined
PFC TLV LLDP extension. LldpXdot1dcbxAdminPFCBasicEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1 |
lldpXdot1dcbxAdminPFCWillingIndicates if the local system is willing to accept the
PFC configuration of the remote system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.1 |
lldpXdot1dcbxAdminPFCMBCIndicates if the local system is capable of bypassing
MACsec processing when MACsec is disabled.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.2 |
lldpXdot1dcbxAdminPFCCapIndicates the number of traffic classes on the local device
that may simultaneously have PFC enabled.
Note that this typically indicates a physical limitation of the
device. However, some devices may allow this parameter to be
administratively configured, in which case the MAX-ACCESS
should be changed to read-write with and an appropriate
DEFVAL added.ro LldpXdot1dcbxSupportedCapacity .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.3 |
lldpXdot1dcbxAdminPFCEnableTableThis table contains eight entries, one entry per priority,
indicating if PFC is enabled on the corresponding priority. SEQUENCE OF LldpXdot1dcbxAdminPFCEnableEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2 |
lldpXdot1dcbxAdminPFCEnableEntryEach entry indicates if PFC is enabled on the
correponding priority LldpXdot1dcbxAdminPFCEnableEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1 |
lldpXdot1dcbxAdminPFCEnablePriorityPrioity for which PFC is enabled / disabled IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1.1 |
lldpXdot1dcbxAdminPFCEnableEnabledIndicates if PFC is enabled on the corresponding priorityrw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1.2 |
lldpXdot1dcbxAdminApplicationPriorityAppTableTable containing entries indicating the priorty to be used
for a given application SEQUENCE OF LldpXdot1dcbxAdminApplicationPriorityAppEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4 |
lldpXdot1dcbxAdminApplicationPriorityAppEntryEntry that indicates the priority to be used for a
given application. LldpXdot1dcbxAdminApplicationPriorityAppEntry .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1 |
lldpXdot1dcbxAdminApplicationPriorityAESelectorIndicates the contents of the protocol object
(lldpXdot1dcbxAdminApplicationPriorityAEProtocol)
1: Ethertype
2: Well Known Port number over TCP, or SCTP
3: Well Known Port number over UDP, or DCCP
4: Well Known Port number over TCP, SCTP, UDP, and DCCP LldpXdot1dcbxAppSelector .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.1 |
lldpXdot1dcbxAdminApplicationPriorityAEProtocolThe protocol indicator of the type indicated by
lldpXdot1dcbxAdminApplicationPriorityAESelector. LldpXdot1dcbxAppProtocol .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.2 |
lldpXdot1dcbxAdminApplicationPriorityAEPriorityThe priority code point that should be used in
frames transporting the protocol indicated by
lldpXdot1dcbxAdminApplicationPriorityAESelector and
lldpXdot1dcbxAdminApplicationPriorityAEProtocolrw IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.3 |
lldpXdot1dcbxConformance OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.6 |
lldpXdot1dcbxCompliances OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.6.1 |
lldpXdot1dcbxGroups OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5.32962.6.2 |