IEEE8021-Q-BRIDGE-MIB
AI MIB Summary
The IEEE8021-Q-BRIDGE-MIB enables monitoring and configuration of IEEE 802.1Q VLAN-tagged bridging domains, specifically tracking VLAN membership, port filtering tables, and bridge protocol data unit (BPDU) states on Layer 2 network switches.
The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE Std 802.1Q.
This MIB module is derived from the IETF Q-BRIDGE-MIB from RFC 4363.
Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014.
Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
Main OID:
ieee8021QBridgeMib.1.3.111.2.802.1.1.4
148
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
148 total| Object Name |
|---|
ieee8021QBridgeMibThe VLAN Bridge MIB module for managing Virtual Bridged
Local Area Networks, as defined by IEEE Std 802.1Q.
This MIB module is derived from the IETF Q-BRIDGE-MIB
from RFC 4363.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q-2014.
Copyright (C) IEEE (2014).
This version of this MIB module is part of IEEE802.1Q;
see the draft itself for full legal notices. MODULE-IDENTITY .1.3.111.2.802.1.1.4 |
ieee8021QBridgeMibObjects OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.1 |
ieee8021QBridgeBase OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.1.1 |
ieee8021QBridgeTableA table that contains generic information about every
VLAN Bridge. SEQUENCE OF Ieee8021QBridgeEntry .1.3.111.2.802.1.1.4.1.1.1 |
ieee8021QBridgeEntryA list of objects containing information for each VLAN Bridge. Ieee8021QBridgeEntry .1.3.111.2.802.1.1.4.1.1.1.1 |
ieee8021QBridgeComponentIdThe component identifier is used to distinguish between the
multiple virtual Bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.1.1.1.1 |
ieee8021QBridgeVlanVersionNumberThe version number of IEEE 802.1Q that this device
supports. Reported as 1 by VLAN Bridges that support
only SST operation, and reported as 2 by VLAN Bridges
that support MST operation.ro Enumeration .1.3.111.2.802.1.1.4.1.1.1.1.2 |
ieee8021QBridgeMaxVlanIdThe maximum IEEE 802.1Q VLAN-ID that this device
supports.ro VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.1.1.1.3 |
ieee8021QBridgeMaxSupportedVlansThe maximum number of IEEE 802.1Q VLANs that this
device supports.ro Unsigned32 UNITS "vlans" .1.3.111.2.802.1.1.4.1.1.1.1.4 |
ieee8021QBridgeNumVlansThe current number of IEEE 802.1Q VLANs that are
configured in this device.ro Gauge32 UNITS "vlans" .1.3.111.2.802.1.1.4.1.1.1.1.5 |
ieee8021QBridgeMvrpEnabledStatusThe administrative status requested by management for
MVRP. The value true(1) indicates that MVRP should
be enabled on this device, on all ports for which it has
not been specifically disabled. When false(2), MVRP
is disabled on all ports, and all MVRP packets will be
forwarded transparently. This object affects all MVRP
Applicant and Registrar state machines. A transition
from false(2) to true(1) will cause a reset of all
MVRP state machines on all ports.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.1.1.1.6 |
ieee8021QBridgeCVlanPortTableThis table provides the capability to create and delete
customer VLAN ports. Entries in this table must be
persistent over power up restart/reboot. SEQUENCE OF Ieee8021QBridgeCVlanPortEntry .1.3.111.2.802.1.1.4.1.1.2 |
ieee8021QBridgeCVlanPortEntryA list of objects containing information for each VLAN Bridge. Ieee8021QBridgeCVlanPortEntry .1.3.111.2.802.1.1.4.1.1.2.1 |
ieee8021QBridgeCVlanPortComponentIdThe componentcontaining the customer VLAN port represented
by this row. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.1.2.1.1 |
ieee8021QBridgeCVlanPortNumberThe customer VLAN port number represented by this row. IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.1.2.1.2 |
ieee8021QBridgeCVlanPortRowStatusThis indicates the status of the entry, and is used to create
and delete entries in this table. Each entry in this table that
is valid will have a corresponding entry in the
ieee8021BridgeBasePortTable whose value for
ieee8021BridgeBasePortType is customerVlanPort(2). The
corresponding value of ieee8021BridgeBasePortIfIndex must
be set at the time the value of this object transitions
to valid(1).
Entries in this table must be persistent across
reinitializations of the management system.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.1.2.1.3 |
ieee8021QBridgeTp OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.1.2 |
ieee8021QBridgeFdbTableA table that contains configuration and control
information for each Filtering Database currently
operating on this device. Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
ieee8021QBridgeVlanCurrentTable. SEQUENCE OF Ieee8021QBridgeFdbEntry .1.3.111.2.802.1.1.4.1.2.1 |
ieee8021QBridgeFdbEntryInformation about a specific Filtering Database. Ieee8021QBridgeFdbEntry .1.3.111.2.802.1.1.4.1.2.1.1 |
ieee8021QBridgeFdbComponentIdThe component identifier is used to distinguish between the
multiple virtual Bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.2.1.1.1 |
ieee8021QBridgeFdbIdThe identity of this Filtering Database. Unsigned32 .1.3.111.2.802.1.1.4.1.2.1.1.2 |
ieee8021QBridgeFdbDynamicCountThe current number of dynamic entries in this
Filtering Database.ro Gauge32 UNITS "database entries" .1.3.111.2.802.1.1.4.1.2.1.1.3 |
ieee8021QBridgeFdbLearnedEntryDiscardsThe total number of Filtering Database entries that
have been or would have been learned, but have been
discarded due to a lack of storage space in the
Filtering Database. If this counter is increasing, it
indicates that the Filtering Database is regularly
becoming full (a condition that has unpleasant
performance effects on the subnetwork). If this counter
has a significant value but is not presently increasing,
it indicates that the problem has been occurring but is
not persistent.
Discontinuities in the value of the counter can occur
at re-initialization of the management system.ro Counter64 UNITS "database entries" .1.3.111.2.802.1.1.4.1.2.1.1.4 |
ieee8021QBridgeFdbAgingTimeThe timeout period in seconds for aging out
dynamically-learned forwarding information.
802.1D-1998 recommends a default of 300 seconds.
The value of this object MUST be retained across
reinitializations of the management system.rw Integer32 .1.3.111.2.802.1.1.4.1.2.1.1.5 |
ieee8021QBridgeTpFdbTableA table that contains information about unicast entries
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame. SEQUENCE OF Ieee8021QBridgeTpFdbEntry .1.3.111.2.802.1.1.4.1.2.2 |
ieee8021QBridgeTpFdbEntryInformation about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information. Ieee8021QBridgeTpFdbEntry .1.3.111.2.802.1.1.4.1.2.2.1 |
ieee8021QBridgeTpFdbAddressA unicast MAC address for which the device has
forwarding and/or filtering information. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.2.2.1.1 |
ieee8021QBridgeTpFdbPortEither the value '0', or the port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of ieee8021QBridgeTpFdbAddress has
been seen. A value of '0' indicates that the port
number has not been learned but that the device does
have some forwarding/filtering information about this
address (e.g., in the ieee8021QBridgeStaticUnicastTable).
Implementors are encouraged to assign the port value to
this object whenever it is learned, even for addresses
for which the corresponding value of ieee8021QBridgeTpFdbStatus is
not learned(3).ro IEEE8021BridgePortNumberOrZero (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.2.2.1.2 |
ieee8021QBridgeTpFdbStatusThe status of this entry. The meanings of the values
are:
other(1) - none of the following. This may include
the case where some other MIB object (not the
corresponding instance of ieee8021QBridgeTpFdbPort, nor an
entry in the ieee8021QBridgeStaticUnicastTable) is being
used to determine if and how frames addressed to
the value of the corresponding instance of
ieee8021QBridgeTpFdbAddress are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of ieee8021QBridgeTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
ieee8021QBridgeTpFdbAddress represents one of the device's
addresses. The corresponding instance of
ieee8021QBridgeTpFdbPort indicates which of the device's
ports has this address.
mgmt(5) - the value of the corresponding instance of
ieee8021QBridgeTpFdbAddress is also the value of an
existing instance of ieee8021QBridgeStaticUnicastAddress.ro Enumeration .1.3.111.2.802.1.1.4.1.2.2.1.3 |
ieee8021QBridgeTpGroupTableA table containing filtering information for VLANs
configured into the Bridge by (local or network)
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded. SEQUENCE OF Ieee8021QBridgeTpGroupEntry .1.3.111.2.802.1.1.4.1.2.3 |
ieee8021QBridgeTpGroupEntryFiltering information configured into the Bridge by
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address are allowed to be
forwarded. The subset of these ports learned dynamically
is also provided. Ieee8021QBridgeTpGroupEntry .1.3.111.2.802.1.1.4.1.2.3.1 |
ieee8021QBridgeTpGroupAddressThe destination Group MAC address in a frame to which
this entry's filtering information applies. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.2.3.1.1 |
ieee8021QBridgeTpGroupEgressPortsThe complete set of ports, in this VLAN, to which
frames destined for this Group MAC address are currently
being explicitly forwarded. This does not include ports
for which this address is only implicitly forwarded, in
the ieee8021QBridgeForwardAllPorts list.ro PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.2.3.1.2 |
ieee8021QBridgeTpGroupLearntThe subset of ports in ieee8021QBridgeTpGroupEgressPorts that
were learned by MMRP or some other dynamic mechanism, in
this Filtering database.ro PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.2.3.1.3 |
ieee8021QBridgeForwardAllTableA table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
all multicasts applies, configured statically by
management or dynamically by MMRP. An entry appears in
this table for all VLANs that are currently
instantiated. SEQUENCE OF Ieee8021QBridgeForwardAllEntry .1.3.111.2.802.1.1.4.1.2.4 |
ieee8021QBridgeForwardAllEntryForwarding information for a VLAN, specifying the set
of ports to which all multicasts should be forwarded,
configured statically by management or dynamically by
MMRP. Ieee8021QBridgeForwardAllEntry .1.3.111.2.802.1.1.4.1.2.4.1 |
ieee8021QBridgeForwardAllVlanIndexThe VLAN-ID or other identifier referring to this VLAN. IEEE8021VlanIndexOrWildcard (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.2.4.1.1 |
ieee8021QBridgeForwardAllPortsThe complete set of ports in this VLAN to which all
multicast group-addressed frames are to be forwarded.
This includes ports for which this need has been
determined dynamically by MMRP, or configured statically
by management.ro PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.2.4.1.2 |
ieee8021QBridgeForwardAllStaticPortsThe set of ports configured by management in this VLAN
to which all multicast group-addressed frames are to be
forwarded. Ports entered in this list will also appear
in the complete set shown by ieee8021QBridgeForwardAllPorts. This
value will be restored after the device is reset. This
only applies to ports that are members of the VLAN,
defined by ieee8021QBridgeVlanCurrentEgressPorts. A port may not
be added in this set if it is already a member of the
set of ports in ieee8021QBridgeForwardAllForbiddenPorts. The
default value is a string of ones of appropriate length,
to indicate the standard behavior of using basic
filtering services, i.e., forward all multicasts to all
ports.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.2.4.1.3 |
ieee8021QBridgeForwardAllForbiddenPortsThe set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward All
Multicast Groups may not be dynamically registered by
MMRP. This value will be restored after the device is
reset. A port may not be added in this set if it is
already a member of the set of ports in
ieee8021QBridgeForwardAllStaticPorts. The default value is a
string of zeros of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.2.4.1.4 |
ieee8021QBridgeForwardUnregisteredTableA table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
multicast group-addressed frames for which no
more specific forwarding information applies. This is
configured statically by management and determined
dynamically by MMRP. An entry appears in this table for
all VLANs that are currently instantiated. SEQUENCE OF Ieee8021QBridgeForwardUnregisteredEntry .1.3.111.2.802.1.1.4.1.2.5 |
ieee8021QBridgeForwardUnregisteredEntryForwarding information for a VLAN, specifying the set
of ports to which all multicasts for which there is no
more specific forwarding information shall be forwarded.
This is configured statically by management or
dynamically by MMRP. Ieee8021QBridgeForwardUnregisteredEntry .1.3.111.2.802.1.1.4.1.2.5.1 |
ieee8021QBridgeForwardUnregisteredVlanIndexThe VLAN-ID or other identifier referring to this VLAN. IEEE8021VlanIndexOrWildcard (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.2.5.1.1 |
ieee8021QBridgeForwardUnregisteredPortsThe complete set of ports in this VLAN to which
multicast group-addressed frames for which there is no
more specific forwarding information will be forwarded.
This includes ports for which this need has been
determined dynamically by MMRP, or configured statically
by management.ro PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.2.5.1.2 |
ieee8021QBridgeForwardUnregisteredStaticPortsThe set of ports configured by management, in this
VLAN, to which multicast group-addressed frames for
which there is no more specific forwarding information
are to be forwarded. Ports entered in this list will
also appear in the complete set shown by
ieee8021QBridgeForwardUnregisteredPorts. This value will be
restored after the device is reset. A port may not be
added in this set if it is already a member of the set
of ports in ieee8021QBridgeForwardUnregisteredForbiddenPorts. The
default value is a string of zeros of appropriate
length, although this has no effect with the default
value of ieee8021QBridgeForwardAllStaticPorts.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.2.5.1.3 |
ieee8021QBridgeForwardUnregisteredForbiddenPortsThe set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward
Unregistered Multicast Groups may not be dynamically
registered by MMRP. This value will be restored after
the device is reset. A port may not be added in this
set if it is already a member of the set of ports in
ieee8021QBridgeForwardUnregisteredStaticPorts. The default value
is a string of zeros of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.2.5.1.4 |
ieee8021QBridgeStatic OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.1.3 |
ieee8021QBridgeStaticUnicastTableA table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.
Entries are valid for unicast addresses only.
Two modes of operation are supported by this table. When
the receive port index is non-zero, this table is
supporting an 802.1D filtering database as specified in
14.7.6.1 of IEEE Std 802.1D. If the receive port is zero,
the table is operating as specified in IEEE Std 802.1Q
8.8.1 and 12.7.7. An agent must at least
support the IEEE Std 802.1Q mode of operation. SEQUENCE OF Ieee8021QBridgeStaticUnicastEntry .1.3.111.2.802.1.1.4.1.3.1 |
ieee8021QBridgeStaticUnicastEntryFiltering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded. Ieee8021QBridgeStaticUnicastEntry .1.3.111.2.802.1.1.4.1.3.1.1 |
ieee8021QBridgeStaticUnicastComponentIdThe component identifier is used to distinguish between the
multiple virtual Bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.3.1.1.1 |
ieee8021QBridgeStaticUnicastVlanIndexThe Vlan to which this entry applies. IEEE8021VlanIndexOrWildcard (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.3.1.1.2 |
ieee8021QBridgeStaticUnicastAddressThe destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a unicast address. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.3.1.1.3 |
ieee8021QBridgeStaticUnicastReceivePortEither the value '0' or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry. An
implementation is required to support the '0' value and
may optionally support non-zero values for this column. IEEE8021BridgePortNumberOrZero (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.3.1.1.4 |
ieee8021QBridgeStaticUnicastStaticEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific unicast address
must be forwarded, regardless of
any dynamic information, e.g., from MMRP. A port may not
be added in this set if it is already a member of the
set of ports in ieee8021QBridgeStaticUnicastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.3.1.1.5 |
ieee8021QBridgeStaticUnicastForbiddenEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific unicast
MAC address must not be forwarded, regardless
of any dynamic information, e.g., from MMRP. A port may
not be added in this set if it is already a member of the
set of ports in ieee8021QBridgeStaticUnicastStaticEgressPorts.
The default value of this object is a string of zeros of
appropriate length.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.3.1.1.6 |
ieee8021QBridgeStaticUnicastStorageTypeThe storage type for this conceptual row. If this object
has a value of permanent(4), then no other objects are
required to be able to be modified.rw StorageType (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.3.1.1.7 |
ieee8021QBridgeStaticUnicastRowStatusThis object indicates the status of this entry, and is used
to create/delete entries in the table.
An entry of this table may be set to active without setting
any other columns of the table. Also, other columns of this
table may be set while the value of this object is active(1).rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.3.1.1.8 |
ieee8021QBridgeStaticMulticastTableA table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded. A value of zero in this table (as the port
number from which frames with a specific destination
address are received) is used to specify all ports for
which there is no specific entry in this table for that
particular destination address. Entries are valid for
Multicast and Broadcast addresses only. SEQUENCE OF Ieee8021QBridgeStaticMulticastEntry .1.3.111.2.802.1.1.4.1.3.2 |
ieee8021QBridgeStaticMulticastEntryFiltering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
destination address are allowed to be forwarded. Ieee8021QBridgeStaticMulticastEntry .1.3.111.2.802.1.1.4.1.3.2.1 |
ieee8021QBridgeStaticMulticastAddressThe destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a Multicast or Broadcast address. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.3.2.1.1 |
ieee8021QBridgeStaticMulticastReceivePortEither the value '0' or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry. An
implementation is required to support the '0' value and
may optionally support non-zero values for this column. IEEE8021BridgePortNumberOrZero (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.3.2.1.2 |
ieee8021QBridgeStaticMulticastStaticEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information, e.g., from MMRP. A port may not
be added in this set if it is already a member of the
set of ports in ieee8021QBridgeStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.3.2.1.3 |
ieee8021QBridgeStaticMulticastForbiddenEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must not be forwarded, regardless
of any dynamic information, e.g., from MMRP. A port may
not be added in this set if it is already a member of the
set of ports in ieee8021QBridgeStaticMulticastStaticEgressPorts.
The default value of this object is a string of zeros of
appropriate length.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.3.2.1.4 |
ieee8021QBridgeStaticMulticastStorageTypeThe storage type for this conceptual row. If this object
has a value of permanent(4), then no other objects are
required to be able to be modified.rw StorageType (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.3.2.1.5 |
ieee8021QBridgeStaticMulticastRowStatusThis object indicates the status of this entry, and is used
to create/delete entries in the table.
An entry of this table may be set to active without setting
any other columns of the table. Also, other columns of this
table may be set while the value of this object is active(1).rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.3.2.1.6 |
ieee8021QBridgeVlan OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.1.4 |
ieee8021QBridgeVlanNumDeletesThe number of times a VLAN entry has been deleted from
the ieee8021QBridgeVlanCurrentTable (for any reason).
If an entry is deleted, then inserted, and then deleted,
this counter will be incremented by 2. Discontinuities
in this value can only occur at a reboot.ro Counter64 UNITS "vlan deletions" .1.3.111.2.802.1.1.4.1.4.1 |
ieee8021QBridgeVlanCurrentTableA table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of MVRP requests received. SEQUENCE OF Ieee8021QBridgeVlanCurrentEntry .1.3.111.2.802.1.1.4.1.4.2 |
ieee8021QBridgeVlanCurrentEntryInformation for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of MVRP requests received. Ieee8021QBridgeVlanCurrentEntry .1.3.111.2.802.1.1.4.1.4.2.1 |
ieee8021QBridgeVlanTimeMarkA TimeFilter for this entry. See the TimeFilter
textual convention to see how this works. TimeFilter (RMON2-MIB) .1.3.111.2.802.1.1.4.1.4.2.1.1 |
ieee8021QBridgeVlanCurrentComponentIdThe component identifier is used to distinguish between the
multiple virtual Bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.2.1.2 |
ieee8021QBridgeVlanIndexThe VLAN-ID or other identifier referring to this VLAN. IEEE8021VlanIndex (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.2.1.3 |
ieee8021QBridgeVlanFdbIdThe Filtering Database used by this VLAN. This is one
of the ieee8021QBridgeFdbId values in the ieee8021QBridgeFdbTable.
This value is allocated automatically by the device whenever
the VLAN is created: either dynamically by MVRP, or by
management, in ieee8021QBridgeVlanStaticTable. Allocation of this
value follows the learning constraints defined for this
VLAN in ieee8021QBridgeLearningConstraintsTable.ro Unsigned32 .1.3.111.2.802.1.1.4.1.4.2.1.4 |
ieee8021QBridgeVlanCurrentEgressPortsThe set of ports that are transmitting traffic for
this VLAN as either tagged or untagged frames.ro PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.4.2.1.5 |
ieee8021QBridgeVlanCurrentUntaggedPortsThe set of ports that are transmitting traffic for
this VLAN as untagged frames.ro PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.4.2.1.6 |
ieee8021QBridgeVlanStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use, but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, corresponding to an entry
in ieee8021QBridgeVlanStaticTable, is currently in use and
will remain so after the next reset of the
device. The port lists for this entry include
ports from the equivalent ieee8021QBridgeVlanStaticTable
entry and ports learned dynamically.
dynamicMvrp(3) - this entry is currently in use
and will remain so until removed by MVRP. There
is no static entry for this VLAN, and it will be
removed when the last port leaves the VLAN.ro Enumeration .1.3.111.2.802.1.1.4.1.4.2.1.7 |
ieee8021QBridgeVlanCreationTimeThe value of sysUpTime when this VLAN was created.ro TimeTicks (SNMPv2-SMI) .1.3.111.2.802.1.1.4.1.4.2.1.8 |
ieee8021QBridgeVlanStaticTableA table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are persistent and will
be restored after the device is reset. SEQUENCE OF Ieee8021QBridgeVlanStaticEntry .1.3.111.2.802.1.1.4.1.4.3 |
ieee8021QBridgeVlanStaticEntryStatic information for a VLAN configured into the
device by (local or network) management. Ieee8021QBridgeVlanStaticEntry .1.3.111.2.802.1.1.4.1.4.3.1 |
ieee8021QBridgeVlanStaticComponentIdThe component identifier is used to distinguish between the
multiple virtual Bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.3.1.1 |
ieee8021QBridgeVlanStaticVlanIndexThe VLAN-ID or other identifier referring to this VLAN. IEEE8021VlanIndex (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.3.1.2 |
ieee8021QBridgeVlanStaticNameAn administratively assigned string, which may be used
to identify the VLAN.rw SnmpAdminString .1.3.111.2.802.1.1.4.1.4.3.1.3 |
ieee8021QBridgeVlanStaticEgressPortsThe set of ports that are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port, per-VLAN
Registrar control for Registration Fixed for the
relevant MVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in ieee8021QBridgeVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.4.3.1.4 |
ieee8021QBridgeVlanForbiddenEgressPortsThe set of ports that are prohibited by management
from being included in the egress list for this VLAN.
Changes to this object that cause a port to be included
or excluded affect the per-port, per-VLAN Registrar
control for Registration Forbidden for the relevant MVRP
state machine on each port. A port may not be added in
this set if it is already a member of the set of ports
in ieee8021QBridgeVlanStaticEgressPorts. The default value of
this object is a string of zeros of appropriate length,
excluding all ports from the forbidden set.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.4.3.1.5 |
ieee8021QBridgeVlanStaticUntaggedPortsThe set of ports that should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (ieee8021QBridgeVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set, then it will reject the
set operation with an error. For example, a
manager might attempt to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option.rw PortList (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.4.3.1.6 |
ieee8021QBridgeVlanStaticRowStatusThis object indicates the status of this entry, and is used
to create/delete entries. Any object in an entry of this table
may be modified while the value of the corresponding instance
of this object is active(1).rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.4.3.1.7 |
ieee8021QBridgeNextFreeLocalVlanTableA table that contains information about the next free VLAN
value for a statically configured VLAN Bridge. SEQUENCE OF Ieee8021QBridgeNextFreeLocalVlanEntry .1.3.111.2.802.1.1.4.1.4.4 |
ieee8021QBridgeNextFreeLocalVlanEntryThe next free VLAN value for a statically configured VLAN Bridge Ieee8021QBridgeNextFreeLocalVlanEntry .1.3.111.2.802.1.1.4.1.4.4.1 |
ieee8021QBridgeNextFreeLocalVlanComponentIdThe component identifier is used to distinguish between the
multiple virtual Bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.4.1.1 |
ieee8021QBridgeNextFreeLocalVlanIndexThe next available value for ieee8021QBridgeVlanIndex of a local
VLAN entry in ieee8021QBridgeVlanStaticTable. This will report
values >=4096 if a new Local VLAN may be created or else
the value 0 if this is not possible.
A row creation operation in this table for an entry with a local
VlanIndex value may fail if the current value of this object
is not used as the index. Even if the value read is used,
there is no guarantee that it will still be the valid index
when the create operation is attempted; another manager may
have already got in during the intervening time interval.
In this case, ieee8021QBridgeNextFreeLocalVlanIndex should be re-read
and the creation re-tried with the new value.
This value will automatically change when the current value is
used to create a new row.ro Unsigned32 (0|4096..4294967295) .1.3.111.2.802.1.1.4.1.4.4.1.2 |
ieee8021QBridgePortVlanTableA table containing per-port control and status
information for VLAN configuration in the device. SEQUENCE OF Ieee8021QBridgePortVlanEntry .1.3.111.2.802.1.1.4.1.4.5 |
ieee8021QBridgePortVlanEntryInformation controlling VLAN configuration for a port
on the device. This is indexed by ieee8021BridgeBasePort. Ieee8021QBridgePortVlanEntry .1.3.111.2.802.1.1.4.1.4.5.1 |
ieee8021QBridgePvidThe PVID, the VLAN-ID assigned to untagged frames or
Priority-tagged frames received on this port.
The value of this object MUST be retained across
reinitializations of the management system.rw IEEE8021VlanIndex (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.5.1.1 |
ieee8021QBridgePortAcceptableFrameTypesWhen this is admitTagged(3), the device will
discard untagged frames or Priority-tagged frames
received on this port. When admitAll(1), untagged
frames or Priority-tagged frames received on this port
will be accepted and assigned to a VID based on the
PVID and VID Set for this port.
This control does not affect VLAN-independent Bridge
Protocol Data Unit (BPDU) frames, such as MVRP and
Spanning Tree Protocol (STP). It does affect VLAN-
dependent BPDU frames, such as MMRP.
The value of this object MUST be retained across
reinitializations of the management system.rw IEEE8021PortAcceptableFrameTypes (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.5.1.2 |
ieee8021QBridgePortIngressFilteringWhen this is true(1), the device will discard incoming
frames for VLANs that do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.
This control does not affect VLAN-independent BPDU
frames, such as MVRP and STP. It does affect VLAN-
dependent BPDU frames, such as MMRP.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.4.5.1.3 |
ieee8021QBridgePortMvrpEnabledStatusThe state of MVRP operation on this port. The value
true(1) indicates that MVRP is enabled on this port,
as long as ieee8021QBridgeMvrpEnabledStatus is also enabled
for this device. When false(2) but
ieee8021QBridgeMvrpEnabledStatus is still
enabled for the device, MVRP is disabled on this port:
any MVRP packets received will be silently discarded, and
no MVRP registrations will be propagated from other
ports. This object affects all MVRP Applicant and
Registrar state machines on this port. A transition
from false(2) to true(1) will cause a reset of all
MVRP state machines on this port.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.4.5.1.4 |
ieee8021QBridgePortMvrpFailedRegistrationsThe total number of failed MVRP registrations, for any
reason, on this port.
Discontinuities in the value of the counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime object of the associated
interface (if any).ro Counter64 UNITS "failed MVRP registrations" .1.3.111.2.802.1.1.4.1.4.5.1.5 |
ieee8021QBridgePortMvrpLastPduOriginThe Source MAC Address of the last MVRP message
received on this port.ro MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.4.5.1.6 |
ieee8021QBridgePortRestrictedVlanRegistrationThe state of Restricted VLAN Registration on this port.
If the value of this control is true(1), then creation
of a new dynamic VLAN entry is permitted only if there
is a Static VLAN Registration Entry for the VLAN concerned,
in which the Registrar Administrative Control value for
this port is Normal Registration.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.4.5.1.7 |
ieee8021QBridgePortVlanStatisticsTableA table containing per-port, per-VLAN statistics for
traffic received. SEQUENCE OF Ieee8021QBridgePortVlanStatisticsEntry .1.3.111.2.802.1.1.4.1.4.6 |
ieee8021QBridgePortVlanStatisticsEntryTraffic statistics for a VLAN on an interface. Ieee8021QBridgePortVlanStatisticsEntry .1.3.111.2.802.1.1.4.1.4.6.1 |
ieee8021QBridgeTpVlanPortInFramesThe number of valid frames received by this port from
its segment that were classified as belonging to this
VLAN. Note that a frame received on this port is
counted by this object if and only if it is for a
protocol being processed by the local forwarding process
for this VLAN. This object includes received Bridge
management frames classified as belonging to this VLAN
(e.g., MMRP, but not MVRP or STP.
Discontinuities in the value of the counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime object of the associated
interface (if any).ro Counter64 UNITS "frames" .1.3.111.2.802.1.1.4.1.4.6.1.1 |
ieee8021QBridgeTpVlanPortOutFramesThe number of valid frames transmitted by this port to
its segment from the local forwarding process for this
VLAN. This includes Bridge management frames originated
by this device that are classified as belonging to this
VLAN (e.g., MMRP, but not MVRP or STP).
Discontinuities in the value of the counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime object of the associated
interface (if any).ro Counter64 UNITS "frames" .1.3.111.2.802.1.1.4.1.4.6.1.2 |
ieee8021QBridgeTpVlanPortInDiscardsThe number of valid frames received by this port from
its segment that were classified as belonging to this
VLAN and that were discarded due to VLAN-related reasons.
Specifically, the IEEE 802.1Q counters for Discard
Inbound and Discard on Ingress Filtering.
Discontinuities in the value of the counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime object of the associated
interface (if any).ro Counter64 UNITS "frames" .1.3.111.2.802.1.1.4.1.4.6.1.3 |
ieee8021QBridgeLearningConstraintsTableA table containing learning constraints for sets of
Shared and Independent VLANs. Entries in this table are
persistent and are preserved across reboots.deprecated SEQUENCE OF Ieee8021QBridgeLearningConstraintsEntry .1.3.111.2.802.1.1.4.1.4.8 |
ieee8021QBridgeLearningConstraintsEntryA learning constraint defined for a VLAN.deprecated Ieee8021QBridgeLearningConstraintsEntry .1.3.111.2.802.1.1.4.1.4.8.1 |
ieee8021QBridgeLearningConstraintsComponentIdThe component identifier is used to distinguish between the
multiple virtual Bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1.deprecated IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.8.1.1 |
ieee8021QBridgeLearningConstraintsVlanThe index of the row in ieee8021QBridgeVlanCurrentTable for the
VLAN constrained by this entry.deprecated IEEE8021VlanIndex (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.8.1.2 |
ieee8021QBridgeLearningConstraintsSetThe identity of the constraint set to which
ieee8021QBridgeLearningConstraintsVlan belongs. These values may
be chosen by the management station.deprecated Integer32 .1.3.111.2.802.1.1.4.1.4.8.1.3 |
ieee8021QBridgeLearningConstraintsTypeThe type of constraint this entry defines.
independent(1) - the VLAN, ieee8021QBridgeLearningConstraintsVlan,
uses a filtering database independent from all
other VLANs in the same set, defined by
ieee8021QBridgeLearningConstraintsSet.
shared(2) - the VLAN, ieee8021QBridgeLearningConstraintsVlan,
shares the same filtering database as all other VLANs
in the same set, defined by
ieee8021QBridgeLearningConstraintsSet.rwdeprecated Enumeration .1.3.111.2.802.1.1.4.1.4.8.1.4 |
ieee8021QBridgeLearningConstraintsStatusThe status of this entry. Any object in an entry of this table
may be modified while the value of the corresponding instance
of this object is active(1).rwdeprecated RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.4.8.1.5 |
ieee8021QBridgeLearningConstraintDefaultsTableA table containing learning constraints for sets of
Shared and Independent VLANs.deprecated SEQUENCE OF Ieee8021QBridgeLearningConstraintDefaultsEntry .1.3.111.2.802.1.1.4.1.4.9 |
ieee8021QBridgeLearningConstraintDefaultsEntryA learning constraint defined for a VLAN.deprecated Ieee8021QBridgeLearningConstraintDefaultsEntry .1.3.111.2.802.1.1.4.1.4.9.1 |
ieee8021QBridgeLearningConstraintDefaultsComponentIdThe component identifier is used to distinguish between the
multiple virtual Bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1.deprecated IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.4.9.1.1 |
ieee8021QBridgeLearningConstraintDefaultsSetThe identity of the constraint set to which a VLAN
belongs, if there is not an explicit entry for that VLAN
in ieee8021QBridgeLearningConstraintsTable.
The value of this object MUST be retained across
reinitializations of the management system.rwdeprecated Integer32 .1.3.111.2.802.1.1.4.1.4.9.1.2 |
ieee8021QBridgeLearningConstraintDefaultsTypeThe type of constraint set to which a VLAN belongs, if
there is not an explicit entry for that VLAN in
ieee8021QBridgeLearningConstraintsTable. The types are as defined
for ieee8021QBridgeLearningConstraintsType.
The value of this object MUST be retained across
reinitializations of the management system.rwdeprecated Enumeration .1.3.111.2.802.1.1.4.1.4.9.1.3 |
ieee8021QBridgeProtocol OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.1.5 |
ieee8021QBridgeProtocolGroupTableA table that contains mappings from Protocol
Templates to Protocol Group Identifiers used for
Port-and-Protocol-based VLAN Classification.
Entries in this table must be persistent over power
up restart/reboot. SEQUENCE OF Ieee8021QBridgeProtocolGroupEntry .1.3.111.2.802.1.1.4.1.5.1 |
ieee8021QBridgeProtocolGroupEntryA mapping from a Protocol Template to a Protocol
Group Identifier. Ieee8021QBridgeProtocolGroupEntry .1.3.111.2.802.1.1.4.1.5.1.1 |
ieee8021QBridgeProtocolGroupComponentIdThe component identifier is used to distinguish between the
multiple virtual Bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.4.1.5.1.1.1 |
ieee8021QBridgeProtocolTemplateFrameTypeThe data-link encapsulation format or the
'detagged_frame_type' in a Protocol Template. Enumeration .1.3.111.2.802.1.1.4.1.5.1.1.2 |
ieee8021QBridgeProtocolTemplateProtocolValueThe identification of the protocol above the data-link
layer in a Protocol Template. Depending on the
frame type, the octet string will have one of the
following values:
For 'ethernet', 'rfc1042' and 'snap8021H',
this is the 16-bit (2-octet) IEEE 802.3 Type Field.
For 'snapOther',
this is the 40-bit (5-octet) PID.
For 'llcOther',
this is the 2-octet IEEE 802.2 Link Service Access
Point (LSAP) pair: first octet for Destination Service
Access Point (DSAP) and second octet for Source Service
Access Point (SSAP). OCTET STRING .1.3.111.2.802.1.1.4.1.5.1.1.3 |
ieee8021QBridgeProtocolGroupIdRepresents a group of protocols that are associated
together when assigning a VID to a frame.rw Integer32 .1.3.111.2.802.1.1.4.1.5.1.1.4 |
ieee8021QBridgeProtocolGroupRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.5.1.1.5 |
ieee8021QBridgeProtocolPortTableA table that contains VID sets used for
Port-and-Protocol-based VLAN Classification. SEQUENCE OF Ieee8021QBridgeProtocolPortEntry .1.3.111.2.802.1.1.4.1.5.2 |
ieee8021QBridgeProtocolPortEntryA VID set for a port. Ieee8021QBridgeProtocolPortEntry .1.3.111.2.802.1.1.4.1.5.2.1 |
ieee8021QBridgeProtocolPortGroupIdDesignates a group of protocols in the Protocol
Group Database. Integer32 .1.3.111.2.802.1.1.4.1.5.2.1.1 |
ieee8021QBridgeProtocolPortGroupVidThe VID associated with a group of protocols for
each port.rw VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.5.2.1.2 |
ieee8021QBridgeProtocolPortRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.5.2.1.3 |
ieee8021QBridgeVIDX OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.1.6 |
ieee8021QBridgeVIDXTableThis table is used to configure the VID Translation
Table defined in 12.10.1.8 and 6.9. The Bridge VID
Translation Table is used to implement a mapping between a
local VID, and a relay VID, used by the filtering and
forwarding process. Each row in this table is indexed by
component, port, and local VID value and a value to be used
for the specified VID as specified in (6.9). Entries in
this table must be persistent over power up restart/reboot. SEQUENCE OF Ieee8021QBridgeVIDXEntry .1.3.111.2.802.1.1.4.1.6.1 |
ieee8021QBridgeVIDXEntryAn entry for the S-VID translation table which includes
both the Local and Relay S-VIDs. Ieee8021QBridgeVIDXEntry .1.3.111.2.802.1.1.4.1.6.1.1 |
ieee8021QBridgeVIDXLocalVidThe Local VID after translation received at the ISS or EISS. VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.6.1.1.1 |
ieee8021QBridgeVIDXRelayVidThe Relay VID received before translation received at ISS or EISS.rw VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.6.1.1.2 |
ieee8021QBridgeVIDXRowStatusThis indicates the status of an entry in this table,
and is used to create/delete entries. It is an
implementation specific decision as to whether
any column in this table may be set while the
corresponding instance of this object is valid(1).rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.6.1.1.3 |
ieee8021QBridgeEgressVidXTableThis table is used to configure the VID Translation
Table defined in 12.10.1.9 and 6.9. The Bridge VID
Egress Translation Table is used to implement a mapping between a
relay VID, and a local VID, used by the filtering and
forwarding process. Each row in this table is indexed by
component, port, and relay VID value and a value to be used
for the specified local VID as specified in (6.9). Entries in
this table must be persistent over power up restart/reboot.deprecated SEQUENCE OF Ieee8021QBridgeEgressVidXEntry .1.3.111.2.802.1.1.4.1.6.2 |
ieee8021QBridgeEgressVidXEntryAn entry for the Egress VID translation table which includes
both the relay and local IDs between which the PNP or CNP
translates.deprecated Ieee8021QBridgeEgressVidXEntry .1.3.111.2.802.1.1.4.1.6.2.1 |
ieee8021QBridgeEgressVidXRelayVidThe Relay VID after translation transmitted to the
ISS or EISS.deprecated VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.6.2.1.1 |
ieee8021QBridgeEgressVidXLocalVidThe Local VID before translation transmitted to the
ISS or EISS.rwdeprecated VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.6.2.1.2 |
ieee8021QBridgeEgressVidXRowStatusThis indicates the status of an entry in this table,
and is used to create/delete entries. It is an
implementation specific decision as to whether
any column in this table may be set while the
corresponding instance of this object is valid(1).rwdeprecated RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.6.2.1.3 |
ieee8021QBridgeEgressVidXV2TableThis table is used to configure the VID Translation
Table defined in 12.10.1.9 and 6.9. The Bridge VID
Egress Translation Table is used to implement a mapping between a
relay VID, and a local VID, used by the filtering and
forwarding process. Each row in this table is indexed by
component, port, and relay VID value and a value to be used
for the specified local VID as specified in (6.9). Entries in
this table must be persistent over power up restart/reboot. SEQUENCE OF Ieee8021QBridgeEgressVidXV2Entry .1.3.111.2.802.1.1.4.1.6.3 |
ieee8021QBridgeEgressVidXV2EntryAn entry for the Egress VID translation table which includes
both the relay and local IDs between which the PNP or CNP
translates. Ieee8021QBridgeEgressVidXV2Entry .1.3.111.2.802.1.1.4.1.6.3.1 |
ieee8021QBridgeEgressVidXV2RelayVidThe Relay VID after translation transmitted to the
ISS or EISS. VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.6.3.1.1 |
ieee8021QBridgeEgressVidXV2LocalVidThe Local VID before translation transmitted to the
ISS or EISS.rw VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.4.1.6.3.1.2 |
ieee8021QBridgeEgressVidXV2RowStatusThis indicates the status of an entry in this table,
and is used to create/delete entries. It is an
implementation specific decision as to whether
any column in this table may be set while the
corresponding instance of this object is valid(1).rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.4.1.6.3.1.3 |
ieee8021QBridgeConformance OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.2 |
ieee8021QBridgeGroups OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.2.1 |
ieee8021QBridgeCompliances OBJECT IDENTIFIER .1.3.111.2.802.1.1.4.2.2 |