IEEE8021-EVBB-MIB
The EVB MIB module for managing devices that support Ethernet Virtual Bridging.
Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2010.
Copyright (C) IEEE. This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
Main OID:
ieee8021BridgeEvbMib.1.3.111.2.802.1.1.100
98
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
ieee8021BridgeEvbMibThe EVB MIB module for managing devices that support
Ethernet Virtual Bridging.
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q-2010.
Copyright (C) IEEE.
This version of this MIB module is part of IEEE802.1Q;
see the draft itself for full legal notices. MODULE-IDENTITY .1.3.111.2.802.1.1.100 |
ieee8021BridgeEvbNotifications OBJECT IDENTIFIER .1.3.111.2.802.1.1.100.0 |
ieee8021BridgeEvbObjects OBJECT IDENTIFIER .1.3.111.2.802.1.1.100.1 |
ieee8021BridgeEvbConfig OBJECT IDENTIFIER .1.3.111.2.802.1.1.100.1.1 |
ieee8021BridgeEvbSysMACAddressThe evbSysMACAddress is any single MAC which uniquely identifies the system.
This MAC may be chosen to be one of the MAC used to identify each component of the systemro MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.1.1 |
ieee8021BridgeEvbSysNameThe evbSysName is a string which may to set by management to identify this system.rw SnmpAdminString .1.3.111.2.802.1.1.100.1.1.2 |
ieee8021BridgeEvbSysTypeThe evbSysType determines if this is an EVB Bridge or EVB station.ro Enumeration .1.3.111.2.802.1.1.100.1.1.3 |
ieee8021BridgeEvbSysNumExternalPortsTBDro Unsigned32 .1.3.111.2.802.1.1.100.1.1.4 |
ieee8021BridgeEvbSysEvbLldpEnablesThis object is used to initialize the S-Channel
interface table entry.rw Bits .1.3.111.2.802.1.1.100.1.1.5 |
ieee8021BridgeEvbSysEvbLldpDfltModeThe value of this object is used as the initial
value for the ieee8021BridgeEvbCAPLldpAdminCap.rw IEEE8021BridgeEvbTLVTC .1.3.111.2.802.1.1.100.1.1.6 |
ieee8021BridgeEvbSysEvbLldpNumVsisSupThis is the total number of VSIs
which this system may support and is used to fill out
the EVB TLV field for Number VSIs Supportedrw Unsigned32 .1.3.111.2.802.1.1.100.1.1.7 |
ieee8021BridgeEvbSysNumCorErCompsTBDro Unsigned32 .1.3.111.2.802.1.1.100.1.1.8 |
ieee8021BridgeEvbSysNumSCompsTBDro Unsigned32 .1.3.111.2.802.1.1.100.1.1.9 |
ieee8021BridgeEvbECPACkTimerA value indicating the Bridge Proposed ECP ackTimer.rw Integer32 .1.3.111.2.802.1.1.100.1.1.10 |
ieee8021BridgeEvbECPMaxRetiresA value indicating the Bridge ECP maxRetries.rw Integer32 .1.3.111.2.802.1.1.100.1.1.11 |
ieee8021BridgeEvbSysVdpDfltRsrcWaitDelayA value indicating the Bridge Resource VDP Timeout.rw Integer32 .1.3.111.2.802.1.1.100.1.1.12 |
ieee8021BridgeEvbSysVdpDfltReinitKeepAliveA value indicating the Bridge Proposed VDP Keep Alive Timeout.rw Integer32 .1.3.111.2.802.1.1.100.1.1.13 |
ieee8021BridgeEvbPhyPortTableA table that contains . SEQUENCE OF Ieee8021BridgeEvbPhyPortEntry .1.3.111.2.802.1.1.100.1.1.14 |
ieee8021BridgeEvbPhyPortEntryA list of objects containing EVB port type objects.
Creation of an entry in this table will implicitly also
create a corresponding entry in the ieee8021BridgeBasePortTable. Ieee8021BridgeEvbPhyPortEntry .1.3.111.2.802.1.1.100.1.1.14.1 |
ieee8021BridgeEvbPhyPortThe external port. IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.1.14.1.1 |
ieee8021BridgeEvbPhyPortMacAddressTBDro MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.1.14.1.2 |
ieee8021BridgeEvbPhyPortTypeCapTBDro Bits .1.3.111.2.802.1.1.100.1.1.14.1.3 |
ieee8021BridgeEvbPhyPortTypeThe port type for this portIndex.rw Enumeration .1.3.111.2.802.1.1.100.1.1.14.1.4 |
ieee8021BridgeEvbPhyPortToComponentIdThe component ID that this EVB port belongs to.rw IEEE8021PbbComponentIdentifierOrZero (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.1.14.1.5 |
ieee8021BridgeEvbPhyPortToInternalPortThe internal port number to which this externel/physical port maps to.rw IEEE8021BridgePortNumberOrZero (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.1.14.1.6 |
ieee8021BridgeEvbPortTableA table that contains . SEQUENCE OF Ieee8021BridgeEvbPortEntry .1.3.111.2.802.1.1.100.1.1.15 |
ieee8021BridgeEvbPortEntryA list of objects containing EVB port type objects.
Creation of an entry in this table will implicitly also
create a corresponding entry in the ieee8021BridgeBasePortTable. Ieee8021BridgeEvbPortEntry .1.3.111.2.802.1.1.100.1.1.15.1 |
ieee8021BridgeEvbPortComponentIdThe component ID that this EVB port belongs to. IEEE8021PbbComponentIdentifierOrZero (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.1.15.1.1 |
ieee8021BridgeEvbPortThe port number of the port for which this entry
contains EVB management information. IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.1.15.1.2 |
ieee8021BridgeEvbPortTypeThe port type for this portIndex.rw Enumeration .1.3.111.2.802.1.1.100.1.1.15.1.3 |
ieee8021BridgeEvbPortRowStatusRowStatus for this table.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.1.15.1.4 |
ieee8021BridgeEvbVSIDBObjects OBJECT IDENTIFIER .1.3.111.2.802.1.1.100.1.2 |
ieee8021BridgeEvbVSIDBTableA table that contains database of the active Virtual Station Interfaces. SEQUENCE OF Ieee8021BridgeEvbVSIDBEntry .1.3.111.2.802.1.1.100.1.2.1 |
ieee8021BridgeEvbVSIDBEntryA list of objects containing database of the active Virtual Station Interfaces. Ieee8021BridgeEvbVSIDBEntry .1.3.111.2.802.1.1.100.1.2.1.1 |
ieee8021BridgeEvbVsiSvidThe Svid to identify the S-Channel interface. Unsigned32 .1.3.111.2.802.1.1.100.1.2.1.1.1 |
ieee8021BridgeEvbVSIIDThis object specifies the VSIID that uniquely identifies the VSI in the DCN OCTET STRING .1.3.111.2.802.1.1.100.1.2.1.1.2 |
ieee8021BridgeEvbVSIComponentIDTBDro IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.2.1.1.3 |
ieee8021BridgeEvbVSIPortNumberTBDro IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.2.1.1.4 |
ieee8021BridgeEvbVSITimeSinceCreateThis object specifies the time since creationro TimeInterval (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.2.1.1.5 |
ieee8021BridgeEvbVsiVdpOperCmdThis object identifies the type of TLV.ro Enumeration .1.3.111.2.802.1.1.100.1.2.1.1.6 |
ieee8021BridgeEvbVsiOperRevertTBDro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.2.1.1.7 |
ieee8021BridgeEvbVsiOperHardTBDro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.2.1.1.8 |
ieee8021BridgeEvbVsiOperReasonThis object indicates the outcome of a request.ro Bits .1.3.111.2.802.1.1.100.1.2.1.1.9 |
ieee8021BridgeEvbVSIMgrIDThis object identifies the VSI Manager with a database that holds the detailed
VSI type and or instance definitions.ro OCTET STRING .1.3.111.2.802.1.1.100.1.2.1.1.10 |
ieee8021BridgeEvbVSITypeThe VTID is an integer value used to identify a pre-configured set of
controls and attributes that are associated with a set of VSIs.ro OCTET STRING .1.3.111.2.802.1.1.100.1.2.1.1.11 |
ieee8021BridgeEvbVSITypeVersionThe VSI Type Version is an integer identifier designating the expected/desired VTID version.
The VTID version allows a VSI Manager Database to contain multiple versions of a
given VSI Type, allowing smooth migration to newer VSI types.ro OCTET STRING .1.3.111.2.802.1.1.100.1.2.1.1.12 |
ieee8021BridgeEvbVSIMvFormatThis object specifies the MAC/VLAN format.
basic - Basic MAC/VLAN format
partial - Partial MAC/VLAN format
vlanOnly - Vlan-only MAC/VLAN formatro Enumeration .1.3.111.2.802.1.1.100.1.2.1.1.13 |
ieee8021BridgeEvbVSINumMACsThis object specifies the the number of MAC address/VLAN ID pairs contained in
the repeated protion of the MAC/VLANs field in the VDP TLV.ro Integer32 .1.3.111.2.802.1.1.100.1.2.1.1.14 |
ieee8021BridgeEvbVDPMachineStateThis object specifies the VDP state machine.ro Enumeration .1.3.111.2.802.1.1.100.1.2.1.1.15 |
ieee8021BridgeEvbVDPCommandsSucceededThis object specifies the VDP number of successful commands since creation.ro Counter32 .1.3.111.2.802.1.1.100.1.2.1.1.16 |
ieee8021BridgeEvbVDPCommandsFailedThis object specifies the VDP number of failed commands since creationro Counter32 .1.3.111.2.802.1.1.100.1.2.1.1.17 |
ieee8021BridgeEvbVDPCommandRevertsThis object specifies the VDP command reverts since creationro Counter32 .1.3.111.2.802.1.1.100.1.2.1.1.18 |
ieee8021BridgeEvbVSIDBMacTableA table that contains database of the active Virtual Station Interfaces. SEQUENCE OF Ieee8021BridgeEvbVSIDBMacEntry .1.3.111.2.802.1.1.100.1.2.2 |
ieee8021BridgeEvbVSIDBMacEntryA list of objects containing database of the MAC/VLANs associated with
Virtual Station Interfaces. Ieee8021BridgeEvbVSIDBMacEntry .1.3.111.2.802.1.1.100.1.2.2.1 |
ieee8021BridgeEvbGroupIDGroup ID Unsigned32 .1.3.111.2.802.1.1.100.1.2.2.1.1 |
ieee8021BridgeEvbVSIMacThe mac-address part of the MAC/VLANs for a VSI. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.2.2.1.2 |
ieee8021BridgeEvbVSIVlanIdThe Vlan ID part of the MAC/VLANs for a VSI.ro VlanIndex (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.100.1.2.2.1.3 |
ieee8021BridgeEvbSChannelObjects OBJECT IDENTIFIER .1.3.111.2.802.1.1.100.1.4 |
ieee8021BridgeEvbUAPConfigTableA table that contains configuration parameters for UAP. SEQUENCE OF Ieee8021BridgeEvbUAPConfigEntry .1.3.111.2.802.1.1.100.1.4.1 |
ieee8021BridgeEvbUAPConfigEntryA list of objects containing information to configure the attributes for UAP. Ieee8021BridgeEvbUAPConfigEntry .1.3.111.2.802.1.1.100.1.4.1.1 |
ieee8021BridgeEvbUAPComponentIdThe ComponentID of the port for the UAP.ro IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.4.1.1.1 |
ieee8021BridgeEvbUAPPortThe port number of the port for the UAP.ro IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.4.1.1.2 |
ieee8021BridgeEvbUAPSchCdcpAdminEnableAdministrative staus of CDCP.rw Enumeration .1.3.111.2.802.1.1.100.1.4.1.1.3 |
ieee8021BridgeEvbUAPSchAdminCDCPRoleThe administratively configured value for the local
port's role parameter. The value of AdminRole is not reflected in
the S-channel TLV. The AdminRole may take the value S or B. S indicates
the sender is unwilling to accept S-channels configuration
(mode, # channels supported, channel index) from its neighbor and
that the sender is willing to accept SVID assignments from the neighbor.
Stations usually take the S role.B indicates the sender is willing to accept
S-channels configuration (mode, # channels supported, channel index)
from its neighbor and that the sender is willing do the best it can to fill
the SVID assignments from the neighbor. Bridges usually take the B role.rw Enumeration .1.3.111.2.802.1.1.100.1.4.1.1.4 |
ieee8021BridgeEvbUAPSchAdminCDCPChanCapThe administratively configured value for the Number of
Channels supported parameter. This value is included as
the ChnCap parameter in the S-channel TLV.rw Integer32 (1 .. 167) .1.3.111.2.802.1.1.100.1.4.1.1.5 |
ieee8021BridgeEvbUAPSchOperCDCPChanCapThe operational value for the Number of
Channels supported parameter. This value is included as
the ChnCap parameter in the S-channel TLV.ro Integer32 (1 .. 167) .1.3.111.2.802.1.1.100.1.4.1.1.6 |
ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolLowDetermines the lowest S-VIDs available for assignment by CDCP.rw VlanIndex (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.100.1.4.1.1.7 |
ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolHighDetermines the highest S-VIDs available for assignment by CDCP.rw VlanIndex (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.100.1.4.1.1.8 |
ieee8021BridgeEvbUAPSchOperStateThe current runnning state of CDCP.ro Enumeration .1.3.111.2.802.1.1.100.1.4.1.1.9 |
ieee8021BridgeEvbSchCdcpRemoteEnabledCDCP state for the remote S-channel.ro Enumeration .1.3.111.2.802.1.1.100.1.4.1.1.10 |
ieee8021BridgeEvbSchCdcpRemoteRoleThe value for the remote
port's role parameter.ro Enumeration .1.3.111.2.802.1.1.100.1.4.1.1.11 |
ieee8021BridgeEvbUAPConfigRowStatusRowStatus for creating a UAP table entry.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.4.1.1.12 |
ieee8021BridgeEvbCAPConfigTableA table that contains configuration information for
the S-Channel Access Ports (CAP). SEQUENCE OF Ieee8021BridgeEvbCAPConfigEntry .1.3.111.2.802.1.1.100.1.4.2 |
ieee8021BridgeEvbCAPConfigEntryA list of objects containing information for the S-Channel Access Ports (CAP) Ieee8021BridgeEvbCAPConfigEntry .1.3.111.2.802.1.1.100.1.4.2.1 |
ieee8021BridgeEvbCAPComponentIdComponent ID for S-channel Access Port.ro IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.4.2.1.1 |
ieee8021BridgeEvbCAPPortPort number for the S-Channel Access Port.ro IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.4.2.1.2 |
ieee8021BridgeEvbCAPSChannelIDS-Channel ID (SCID) for this CAP.ro Integer32 .1.3.111.2.802.1.1.100.1.4.2.1.3 |
ieee8021BridgeEvbCAPAssociateSBPCompIDComponent ID of the Server Edge Port to be
associated with the CAP.rw IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.4.2.1.6 |
ieee8021BridgeEvbCAPAssociateSBPPortPort number of the Server Edge Port to be
associated with the CAP.rw IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.100.1.4.2.1.7 |
ieee8021BridgeEvbCAPLldpAdminEnablesTo use manual or auto configuration for EVB LLDP TLV.
In manual operation the system may exchange the EVB
TLV however does not use the information supplied to set
the operating parameters for RR, ECP and VDP.The default
value for the ieee8021BridgeEvbSysEvbLldpEnables is LLDP
on and manual off.rw Bits .1.3.111.2.802.1.1.100.1.4.2.1.8 |
ieee8021BridgeEvbCAPLldpAdminCapEVB current configured capabilities.rw IEEE8021BridgeEvbTLVTC .1.3.111.2.802.1.1.100.1.4.2.1.9 |
ieee8021BridgeEvbCAPLldpOperModeEVB current operational capabilities.ro IEEE8021BridgeEvbTLVTC .1.3.111.2.802.1.1.100.1.4.2.1.10 |
ieee8021BridgeEvbCAPEcpAdminAckTimerInitThe initial value used to initialize ackTimer
(44.3.6.1).rw TimeInterval (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.4.2.1.11 |
ieee8021BridgeEvbCAPEcpOperAckTimerInitThe initial value used to initialize ackTimer
(44.3.6.1).ro TimeInterval (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.4.2.1.12 |
ieee8021BridgeEvbCAPEcpAdminMaxTriesThis integer variable defines the maximum number
of times that the ECP transmit state machine will
retry a transmission if no ACK is received.rw Unsigned32 .1.3.111.2.802.1.1.100.1.4.2.1.13 |
ieee8021BridgeEvbCAPEcpOperMaxRetriesThis integer variable defines the maximum number
of times that the ECP transmit state machine will
retry a transmission if no ACK is received.ro Unsigned32 .1.3.111.2.802.1.1.100.1.4.2.1.14 |
ieee8021BridgeEvbCAPEcpTxFrameCountTBD.ro Counter32 .1.3.111.2.802.1.1.100.1.4.2.1.15 |
ieee8021BridgeEvbCAPEcpTxRetryCountTBD.ro Counter32 .1.3.111.2.802.1.1.100.1.4.2.1.16 |
ieee8021BridgeEvbCAPEcpTxFailuresTBD.ro Counter32 .1.3.111.2.802.1.1.100.1.4.2.1.17 |
ieee8021BridgeEvbCAPEcpRxFrameCountTBD.ro Counter32 .1.3.111.2.802.1.1.100.1.4.2.1.18 |
ieee8021BridgeEvbCAPVdpOperRsrcWaitDelayThe value used to initialize the waitWhile timer
(42.2.5.1) by the EVBCB VDP state machine when the
state machine is waiting for a response.rw TimeInterval (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.4.2.1.19 |
ieee8021BridgeEvbCAPVdpOperRespWaitDelayThe value used to initialize the waitWhile timer
(42.2.5.1) by the station VDP state machine when
the state machine is waiting for a response.rw TimeInterval (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.4.2.1.20 |
ieee8021BridgeEvbCAPVdpOperReinitKeepAliveThe value used to initialize the waitWhile timer
(42.2.5.1) by the station VDP state machine in order
to determine when to transmit a keep alive message.rw TimeInterval (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.4.2.1.21 |
ieee8021BridgeEvbCAPVdpOperToutKeepAliveThe value used to initialize the waitWhile timer
(42.2.5.1) by the EVBCB VDP state machine n order to
determine when to transmit a keep alive message.rw TimeInterval (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.4.2.1.22 |
ieee8021BridgeEvbCAPRowStatusRowStatus to create/destroy this table.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.100.1.4.2.1.23 |
ieee8021BridgeEvbConformance OBJECT IDENTIFIER .1.3.111.2.802.1.1.100.2 |
ieee8021BridgeEvbGroups OBJECT IDENTIFIER .1.3.111.2.802.1.1.100.2.1 |
ieee8021BridgeEvbCompliances OBJECT IDENTIFIER .1.3.111.2.802.1.1.100.2.2 |