LLDP-V2-MIB
AI MIB Summary
The LLDP-V2-MIB module manages IEEE 802.1AB-2009 compliant Link Layer Discovery Protocol agents to monitor local system identity, remote neighbor topology, and per-port transmission statistics, specifically supporting multi-agent architectures where distinct MAC addresses are associated with a single physical port.
Management Information Base module for LLDP configuration, statistics, local system data and remote systems data components.
This MIB module supports the architecture described in Clause 6, where multiple LLDP agents can be associated with a single Port, each supporting transmission by means of a different MAC address.
Unless otherwise indicated, the references in this MIB module are to IEEE 802.1AB-2009.
Copyright (C) IEEE (2009). This version of this MIB module is published as subclause 11.5.2 of IEEE Std 802.1AB-2009; see the standard itself for full legal notices.
Main OID:
lldpV2MIB.1.3.111.2.802.1.1.13
128
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
128 total| Object Name |
|---|
lldpV2MIBManagement Information Base module for LLDP configuration,
statistics, local system data and remote systems data
components.
This MIB module supports the architecture described in
Clause 6, where multiple LLDP agents can be associated with
a single Port, each supporting transmission by means of a
different MAC address.
Unless otherwise indicated, the references in this
MIB module are to IEEE 802.1AB-2009.
Copyright (C) IEEE (2009). This version of this MIB module
is published as subclause 11.5.2 of IEEE Std 802.1AB-2009;
see the standard itself for full legal notices. MODULE-IDENTITY .1.3.111.2.802.1.1.13 |
lldpV2Notifications OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.0 |
lldpV2NotificationPrefix OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.0.0 |
lldpV2RemTablesChangeA lldpV2RemTablesChange notification is sent when the value
of lldpV2StatsRemTablesLastChangeTime changes. It can be
utilized by an NMS to trigger LLDP remote systems table
maintenance polls.
Note that transmission of lldpV2RemTablesChange
notifications are throttled by the agent, as specified by the
'lldpV2NotificationInterval' object. NOTIFICATION-TYPE .1.3.111.2.802.1.1.13.0.0.1 |
lldpV2Objects OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1 |
lldpV2Configuration OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.1 |
lldpV2MessageTxIntervalThe interval at which LLDP frames are transmitted on
behalf of this LLDP agent.
The default value for lldpV2MessageTxInterval object is
30 seconds.
The value of this object is used as the initial value of
the lldpV2PortMessageTxInterval object on row creation in
the lldpV2PortConfigTableV2.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.1 |
lldpV2MessageTxHoldMultiplierThe time-to-live value expressed as a multiple of the
lldpV2MessageTxInterval object. The actual time-to-live
value used in LLDP frames, transmitted on behalf of this
LLDP agent, can be expressed by the following formula:
TTL = min(65535,
(lldpV2MessageTxInterval*lldpV2MessageTxHoldMultiplier)+1)
For example, if the value of lldpV2MessageTxInterval is
'30', and the value of lldpV2MessageTxHoldMultiplier
is '4', then the value '121' is encoded in the
TTL field in the LLDP header.
The default value for lldpV2MessageTxHoldMultiplier
object is 4.
The value of this object is used as the initial value of
the lldpV2PortMessageTxHoldMultiplier object on row creation in
the lldpV2PortConfigTableV2.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.2 |
lldpV2ReinitDelayThe lldpV2ReinitDelay indicates the delay (in units of
seconds) from when lldpPortConfigAdminStatus object of a
particular port becomes 'disabled' until re-initialization
is attempted.
The default value for lldpV2ReinitDelay is two seconds.
The value of this object is used as the initial value of
the lldpV2PortReinitDelay object on row creation in
the lldpV2PortConfigTableV2.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.3 |
lldpV2NotificationIntervalThis object controls the interval between transmission of
LLDP notifications during normal transmission periods.
The value of this object is used as the initial value of
the lldpV2PortNotificationInterval object on row creation in
the lldpV2PortConfigTableV2.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.4 |
lldpV2TxCreditMaxThe maximum number of consecutive LLDPDUs that can be
transmitted at any time.
The default value for lldpV2TxCreditMax object is 5 PDUs.
The value of this object is used as the initial value of
the lldpV2PortTxCreditMax object on row creation in
the lldpV2PortConfigTableV2.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.5 |
lldpV2MessageFastTxThe interval at which LLDP frames are transmitted on
behalf of this LLDP agent during fast transmission period
(e.g. when a new neighbor is detected).
The default value for lldpV2MessageFastTx object is
1 second.
The value of this object is used as the initial value of
the lldpV2PortMessageFastTx object on row creation in
the lldpV2PortConfigTableV2.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.6 |
lldpV2TxFastInitThe initial value used to initialize the txFast variable
which determines the number of transmissions that are
made in fast transmission mode.
The default value for lldpV2TxFastInit object is 4.
The value of this object is used as the initial value of
the lldpV2PortTxFastInit object on row creation in
the lldpV2PortConfigTableV2.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.7 |
lldpV2PortConfigTableThe table that controls LLDP frame transmission on individual
ports and using particular destination MAC addresses.deprecated SEQUENCE OF LldpV2PortConfigEntry .1.3.111.2.802.1.1.13.1.1.8 |
lldpV2PortConfigEntryLLDP configuration information for a particular port and
destination MAC address.
This configuration parameter controls the transmission and
the reception of LLDP frames on those interface/address
combinations whose rows are created in this table.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots.deprecated LldpV2PortConfigEntry .1.3.111.2.802.1.1.13.1.1.8.1 |
lldpV2PortConfigIfIndexThe interface index value used to identify the port
associated with this entry. Its value is an index into
the interfaces MIB.
The value of this object is used as an index to the
lldpV2PortConfigTable.deprecated InterfaceIndex (IF-MIB) .1.3.111.2.802.1.1.13.1.1.8.1.1 |
lldpV2PortConfigDestAddressIndexThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the lldpV2DestAddressTable where the MAC address
can be found.
The value of this object is used as an index to the
lldpV2PortConfigTable.deprecated LldpV2DestAddressTableIndex (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.1.8.1.2 |
lldpV2PortConfigAdminStatusThe administratively desired status of the local LLDP agent.
If the associated lldpV2PortConfigAdminStatus object is
set to a value of 'txOnly(1)', then LLDP agent transmits
LLDPframes on this port and it does not store any
information about the remote systems connected.
If the associated lldpV2PortConfigAdminStatus object is
set to a value of 'rxOnly(2)', then the LLDP agent
receives, but it does not transmit LLDP frames on this port.
If the associated lldpV2PortConfigAdminStatus object is set
to a value of 'txAndRx(3)', then the LLDP agent transmits
and receives LLDP frames on this port.
If the associated lldpV2PortConfigAdminStatus object is set
to a value of 'disabled(4)', then LLDP agent does not
transmit or receive LLDP frames on this port. If there is
remote systems information which is received on this port
and stored in other tables, before the port's
lldpV2PortConfigAdminStatus becomes disabled, then that
information is deleted.rwdeprecated Enumeration .1.3.111.2.802.1.1.13.1.1.8.1.3 |
lldpV2PortConfigNotificationEnableThe lldpV2PortConfigNotificationEnable controls, on a per
agent basis, whether or not notifications from the agent
are enabled. The value true(1) means that notifications are
enabled; the value false(2) means that they are not.rwdeprecated TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.1.8.1.4 |
lldpV2PortConfigTLVsTxEnableThe lldpV2PortConfigTLVsTxEnable, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type associated
with a specific optional TLV.
It should be noted that the organizationally-specific TLVs
are excluded from the lldpV2PortConfigTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should
have similar configuration object to control transmission
of their organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should
transmit 'Port Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit
'System Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
'System Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit
'System Capabilities TLV'.
There is no bit reserved for the management address TLV type
since transmission of management address TLVs are controlled
by another object, lldpV2ConfigManAddrTable.
The default value for lldpV2PortConfigTLVsTxEnable object is
empty set, which means no enumerated values are set.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rwdeprecated Bits .1.3.111.2.802.1.1.13.1.1.8.1.5 |
lldpV2DestAddressTableThe table that contains the set of MAC addresses used
by LLDP for transmission and reception of LLDPDUs. SEQUENCE OF LldpV2DestAddressTableEntry .1.3.111.2.802.1.1.13.1.1.9 |
lldpV2DestAddressTableEntryDestination MAC address information for LLDP.
This configuration parameter identifies a MAC address
corresponding to a LldpV2DestAddressTableIndex value.
Rows in this table are created as necessary, to support
MAC addresses needed by other tables in the MIB that
are indexed by MAC address.
A given row in this table cannot be deleted if the MAC
address table index value is in use in any other table
in the MIB.
The contents of this table is persistent aacross
re-initializations or re-boots. LldpV2DestAddressTableEntry .1.3.111.2.802.1.1.13.1.1.9.1 |
lldpV2AddressTableIndexThe index value used to identify the destination
MAC address associated with this entry.
The value of this object is used as an index to the
lldpV2DestAddressTable. LldpV2DestAddressTableIndex (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.1.9.1.1 |
lldpV2DestMacAddressThe MAC address associated with this entry.
The octet string identifies an individual or a group
MAC address that is in use by LLDP as a destination
MAC address.
The MAC address is encoded in the octet string in
canonical format (see IEEE Std 802).ro MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.1.9.1.2 |
lldpV2ManAddrConfigTxPortsTableThe table that controls selection of LLDP management address
TLV instances to be transmitted on individual port/
destination address pairs. SEQUENCE OF LldpV2ManAddrConfigTxPortsEntry .1.3.111.2.802.1.1.13.1.1.10 |
lldpV2ManAddrConfigTxPortsEntryLLDP configuration information that specifies the set
of port/destination address pairs on which the local
system management address instance is transmitted.
Each active lldpManAddrConfigTxPortsTableV2Entry is
restored from non-volatile storage and re-created
after a re-initialization of the management system. LldpV2ManAddrConfigTxPortsEntry .1.3.111.2.802.1.1.13.1.1.10.1 |
lldpV2ManAddrConfigIfIndexThe interface index value used to identify the port
associated with this entry. Its value is an index into
the interfaces MIB.
The value of this object is used as an index to the
lldpV2PortConfigTable.
The value in this column of the table MUST match
the IfIndex value specified in the BridgePort table. InterfaceIndex (IF-MIB) .1.3.111.2.802.1.1.13.1.1.10.1.1 |
lldpV2ManAddrConfigDestAddressIndexThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the lldpV2DestAddressTable where the MAC address
can be found.
The value of this object is used as an index to the
lldpV2PortConfigTable. LldpV2DestAddressTableIndex (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.1.10.1.2 |
lldpV2ManAddrConfigLocManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object.
It should be noted that only a subset of the possible
address encodings enumerated in AddressFamilyNumbers
are appropriate for use as a LLDP management
address, either because some are just not apliccable or
because the maximum size of a LldpV2ManAddress octet string
would prevent the use of some address identifier encodings. AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.111.2.802.1.1.13.1.1.10.1.3 |
lldpV2ManAddrConfigLocManAddrThe string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity. LldpV2ManAddress (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.1.10.1.4 |
lldpV2ManAddrConfigTxEnableA boolean controlling the transmission of system
management address instance for the specified port,
destination, subtype and MAN address used to index
this table. If set to the default value of false,
no transmission occurs. If set to true, the
appropriate information is transmitted out of the
port specified in the row's index.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.1.10.1.5 |
lldpV2ManAddrConfigRowStatusIndicates the status of an entry in this table, and is used
to create/delete entries.
The corresponding instances of the following objects
must be set before this object can be made active(1):
lldpV2ManAddrConfigDestAddressIndex
lldpV2ManAddrConfigLocManAddrSubtype
lldpV2ManAddrConfigLocManAddr
lldpV2ManAddrConfigTxEnable
The corresponding instances of the following objects
may not be changed while this object is active(1):
lldpV2ManAddrConfigDestAddressIndex
lldpV2ManAddrConfigLocManAddrSubtype
lldpV2ManAddrConfigLocManAddrrw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.1.10.1.6 |
lldpV2PortConfigTableV2The table that controls LLDP frame transmission on individual
ports and using particular destination MAC addresses. SEQUENCE OF LldpV2PortConfigEntryV2 .1.3.111.2.802.1.1.13.1.1.11 |
lldpV2PortConfigEntryV2LLDP configuration information for a particular port and
destination MAC address.
This configuration parameter controls the transmission and
the reception of LLDP frames on those interface/address
combinations whose rows are created in this table.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots. LldpV2PortConfigEntryV2 .1.3.111.2.802.1.1.13.1.1.11.1 |
lldpV2PortConfigIfIndexV2The interface index value used to identify the port
associated with this entry. Its value is an index into
the interfaces MIB.
The value of this object is used as an index to the
lldpV2PortConfigTable. InterfaceIndex (IF-MIB) .1.3.111.2.802.1.1.13.1.1.11.1.1 |
lldpV2PortConfigDestAddressIndexV2The index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the lldpV2DestAddressTable where the MAC address
can be found.
The value of this object is used as an index to the
lldpV2PortConfigTable. LldpV2DestAddressTableIndex (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.1.11.1.2 |
lldpV2PortConfigAdminStatusV2The administratively desired status of the local LLDP agent.
If the associated lldpV2PortConfigAdminStatus object is
set to a value of 'txOnly(1)', then LLDP agent transmits
LLDPframes on this port and it does not store any
information about the remote systems connected.
If the associated lldpV2PortConfigAdminStatus object is
set to a value of 'rxOnly(2)', then the LLDP agent
receives, but it does not transmit LLDP frames on this port.
If the associated lldpV2PortConfigAdminStatus object is set
to a value of 'txAndRx(3)', then the LLDP agent transmits
and receives LLDP frames on this port.
If the associated lldpV2PortConfigAdminStatus object is set
to a value of 'disabled(4)', then LLDP agent does not
transmit or receive LLDP frames on this port. If there is
remote systems information which is received on this port
and stored in other tables, before the port's
lldpV2PortConfigAdminStatus becomes disabled, then that
information is deleted.rw Enumeration .1.3.111.2.802.1.1.13.1.1.11.1.3 |
lldpV2PortMessageTxIntervalThe interval at which LLDP frames are transmitted on
behalf of this LLDP agent.
This object takes its initial value from the
lldpV2MessageTxInterval object on table row creation.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.11.1.4 |
lldpV2PortMessageTxHoldMultiplierThe time-to-live value expressed as a multiple of the
lldpV2MessageTxInterval object. The actual time-to-live
value used in LLDP frames, transmitted on behalf of this
LLDP agent, can be expressed by the following formula:
TTL = min(65535,
(lldpV2MessageTxInterval*lldpV2MessageTxHoldMultiplier)+1)
For example, if the value of lldpV2MessageTxInterval is
'30', and the value of lldpV2MessageTxHoldMultiplier
is '4', then the value '121' is encoded in the
TTL field in the LLDP header.
This object takes its initial value from the
lldpV2PortMessageTxHoldMultiplier object on table row creation.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.11.1.5 |
lldpV2PortReinitDelayThe lldpV2ReinitDelay indicates the delay (in units of
seconds) from when lldpPortConfigAdminStatus object of a
particular port becomes 'disabled' until re-initialization
is attempted.
This object takes its initial value from the
lldpV2PortReinitDelay object on table row creation.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.11.1.6 |
lldpV2PortNotificationIntervalThis object controls the interval between transmission of
LLDP notifications during normal transmission periods.
This object takes its initial value from the
lldpV2PortNotificationInterval object on table row creation.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.11.1.7 |
lldpV2PortTxCreditMaxThe maximum number of consecutive LLDPDUs that can be
transmitted at any time.
This object takes its initial value from the
lldpV2PortTxCreditMax object on table row creation.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.11.1.8 |
lldpV2PortMessageFastTxThe interval at which LLDP frames are transmitted on
behalf of this LLDP agent during fast transmission period
(e.g. when a new neighbor is detected).
This object takes its initial value from the
lldpV2PortMessageFastTx object on table row creation.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.11.1.9 |
lldpV2PortTxFastInitThe initial value used to initialize the txFast variable
which determines the number of transmissions that are
made in fast transmission mode.
This object takes its initial value from the
lldpV2PortTxFastInit object on table row creation.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 .1.3.111.2.802.1.1.13.1.1.11.1.10 |
lldpV2PortConfigNotificationEnableV2The lldpV2PortConfigNotificationEnableV2 controls, on a per
agent basis, whether or not notifications from the agent
are enabled. The value true(1) means that notifications are
enabled; the value false(2) means that they are not.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.1.11.1.11 |
lldpV2PortConfigTLVsTxEnableV2The lldpV2PortConfigTLVsTxEnableV2, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type associated
with a specific optional TLV.
It should be noted that the organizationally-specific TLVs
are excluded from the lldpV2PortConfigTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should
have similar configuration object to control transmission
of their organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should
transmit 'Port Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit
'System Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
'System Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit
'System Capabilities TLV'.
There is no bit reserved for the management address TLV type
since transmission of management address TLVs are controlled
by another object, lldpV2ConfigManAddrTable.
The default value for lldpV2PortConfigTLVsTxEnable object is
empty set, which means no enumerated values are set.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw Bits .1.3.111.2.802.1.1.13.1.1.11.1.12 |
lldpV2Statistics OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.2 |
lldpV2StatsRemTablesLastChangeTimeThe value of sysUpTime object (defined in IETF RFC 3418)
at the time an entry is created, modified, or deleted in the
in tables associated with the lldpV2RemoteSystemsData objects
and all LLDP extension objects associated with remote systems.
An NMS can use this object to reduce polling of the
lldpV2RemoteSystemsData objects.ro TimeStamp (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.2.1 |
lldpV2StatsRemTablesInsertsThe number of times the complete set of information
advertised by a particular MSAP has been inserted into tables
contained in lldpV2RemoteSystemsData and lldpV2Extensions objects.
The complete set of information received from a particular
MSAP should be inserted into related tables. If partial
information cannot be inserted for a reason such as lack
of resources, all of the complete set of information should
be removed.
This counter should be incremented only once after the
complete set of information is successfully recorded
in all related tables. Any failures during inserting
information set which result in deletion of previously
inserted information should not trigger any changes in
lldpV2StatsRemTablesInserts since the insert is not completed
yet or in lldpStatsRemTablesDeletes, since the deletion
would only be a partial deletion. If the failure was the
result of lack of resources, the lldpStatsRemTablesDrops
counter should be incremented once.ro ZeroBasedCounter32 UNITS "table entries" .1.3.111.2.802.1.1.13.1.2.2 |
lldpV2StatsRemTablesDeletesThe number of times the complete set of information
advertised by a particular MSAP has been deleted from
tables contained in lldpV2RemoteSystemsData and lldpV2Extensions
objects.
This counter should be incremented only once when the
complete set of information is completely deleted from all
related tables. Partial deletions, such as deletion of
rows associated with a particular MSAP from some tables,
but not from all tables are not allowed, thus should not
change the value of this counter.ro ZeroBasedCounter32 UNITS "table entries" .1.3.111.2.802.1.1.13.1.2.3 |
lldpV2StatsRemTablesDropsThe number of times the complete set of information
advertised by a particular MSAP could not be entered into
tables contained in lldpV2RemoteSystemsData and lldpV2Extensions
objects because of insufficient resources.ro ZeroBasedCounter32 UNITS "table entries" .1.3.111.2.802.1.1.13.1.2.4 |
lldpV2StatsRemTablesAgeoutsThe number of times the complete set of information
advertised by a particular MSAP has been deleted from tables
contained in lldpV2RemoteSystemsData and lldpV2Extensions objects
because the information timeliness interval has expired.
This counter should be incremented only once when the complete
set of information is completely invalidated (aged out)
from all related tables. Partial ageing, similar to deletion
case, is not allowed, and thus, should not change the value
of this counter.ro ZeroBasedCounter32 UNITS "table entries" .1.3.111.2.802.1.1.13.1.2.5 |
lldpV2StatsTxPortTableA table containing LLDP transmission statistics for
individual port/destination address combinations.
Entries are not required to exist in
this table while the lldpPortConfigEntry object is equal to
'disabled(4)'. SEQUENCE OF LldpV2StatsTxPortEntry .1.3.111.2.802.1.1.13.1.2.6 |
lldpV2StatsTxPortEntryLLDP frame transmission statistics for a particular port
and destination MAC address.
The port is contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rxInfoTTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
adminStatus is disabled for the same port.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2. LldpV2StatsTxPortEntry .1.3.111.2.802.1.1.13.1.2.6.1 |
lldpV2StatsTxIfIndexThe interface index value used to identify the port
associated with this entry. Its value is an index
into the interfaces MIB
The value of this object is used as an index to the
lldpV2StatsTxPortTable. InterfaceIndex (IF-MIB) .1.3.111.2.802.1.1.13.1.2.6.1.1 |
lldpV2StatsTxDestMACAddressThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the lldpV2DestAddressTable where the MAC address
can be found.
The value of this object is used as an index to the
lldpV2StatsTxPortTable. LldpV2DestAddressTableIndex (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.2.6.1.2 |
lldpV2StatsTxPortFramesTotalThe number of LLDP frames transmitted by this LLDP agent
on the indicated port to the destination MAC address
associated with this row of the table.ro Counter32 UNITS "LLDP frames" .1.3.111.2.802.1.1.13.1.2.6.1.3 |
lldpV2StatsTxLLDPDULengthErrorsThe number of LLDPDU Length Errors recorded for the Port.ro Counter32 UNITS "LLDP frames" .1.3.111.2.802.1.1.13.1.2.6.1.4 |
lldpV2StatsRxPortTableA table containing LLDP reception statistics for individual
ports and destination MAC addresses.
Entries are not required to exist in this table while
the lldpPortConfigEntry object is equal to 'disabled(4)'. SEQUENCE OF LldpV2StatsRxPortEntry .1.3.111.2.802.1.1.13.1.2.7 |
lldpV2StatsRxPortEntryLLDP frame reception statistics for a particular port.
The port is contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rxInfoTTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
adminStatus is disabled for the same port.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots. LldpV2StatsRxPortEntry .1.3.111.2.802.1.1.13.1.2.7.1 |
lldpV2StatsRxDestIfIndexThe interface index value used to identify the port
associated with this entry. Its value is an index
into the interfaces MIB
The value of this object is used as an index to the
lldpStatsRxPortV2Table. InterfaceIndex (IF-MIB) .1.3.111.2.802.1.1.13.1.2.7.1.1 |
lldpV2StatsRxDestMACAddressThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the lldpV2DestAddressTable where the MAC address
can be found.
The value of this object is used as an index to the
lldpStatsRxPortV2Table. LldpV2DestAddressTableIndex (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.2.7.1.2 |
lldpV2StatsRxPortFramesDiscardedTotalThe number of LLDP frames received by this LLDP agent on
the indicated port, and then discarded for any reason.
This counter can provide an indication that LLDP header
formatting problems may exist with the local LLDP agent in
the sending system or that LLDPDU validation problems may
exist with the local LLDP agent in the receiving system.ro Counter32 UNITS "LLDP frames" .1.3.111.2.802.1.1.13.1.2.7.1.3 |
lldpV2StatsRxPortFramesErrorsThe number of invalid LLDP frames received by this LLDP
agent on the indicated port, while this LLDP agent is enabled.ro Counter32 UNITS "LLDP frames" .1.3.111.2.802.1.1.13.1.2.7.1.4 |
lldpV2StatsRxPortFramesTotalThe number of valid LLDP frames received by this LLDP agent
on the indicated port, while this LLDP agent is enabled.ro Counter32 UNITS "LLDP frames" .1.3.111.2.802.1.1.13.1.2.7.1.5 |
lldpV2StatsRxPortTLVsDiscardedTotalThe number of LLDP TLVs discarded for any reason by this LLDP
agent on the indicated port.ro Counter32 UNITS "TLVs" .1.3.111.2.802.1.1.13.1.2.7.1.6 |
lldpV2StatsRxPortTLVsUnrecognizedTotalThe number of LLDP TLVs received on the given port that
are not recognized by this LLDP agent on the indicated port.
An unrecognized TLV is referred to as the TLV whose type value
is in the range of reserved TLV types (000 1001 - 111 1110)
in Table 9.1 of IEEE Std 802.1AB-2004. An unrecognized
TLV may be a basic management TLV from a later LLDP version.ro Counter32 UNITS "TLVs" .1.3.111.2.802.1.1.13.1.2.7.1.7 |
lldpV2StatsRxPortAgeoutsTotalThe counter that represents the number of age-outs that
occurred on a given port. An age-out is the number of
times the complete set of information advertised by a
particular MSAP has been deleted from tables contained in
lldpV2RemoteSystemsData and lldpV2Extensions objects because
the information timeliness interval has expired.
This counter is similar to lldpV2StatsRemTablesAgeouts, except
that the counter is on a per port basis. This enables NMS to
poll tables associated with the lldpV2RemoteSystemsData objects
and all LLDP extension objects associated with remote systems
on the indicated port only.
This counter is set to zero during agent initialization
and its value should not be saved in non-volatile storage.
This counter is incremented only once when the
complete set of information is invalidated (aged out) from
all related tables on a particular port. Partial ageing
is not allowed.ro ZeroBasedCounter32 (RMON2-MIB) .1.3.111.2.802.1.1.13.1.2.7.1.8 |
lldpV2LocalSystemData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.3 |
lldpV2LocChassisIdSubtypeThe type of encoding used to identify the chassis
associated with the local system.ro LldpV2ChassisIdSubtype (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.3.1 |
lldpV2LocChassisIdThe string value used to identify the chassis component
associated with the local system.ro LldpV2ChassisId (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.3.2 |
lldpV2LocSysNameThe string value used to identify the system name of the
local system. If the local agent supports IETF RFC 3418,
lldpLocSysName object should have the same value as sysName
object.ro SnmpAdminString .1.3.111.2.802.1.1.13.1.3.3 |
lldpV2LocSysDescThe string value used to identify the system description
of the local system. If the local agent supports IETF RFC 3418,
lldpLocSysDesc object should have the same value as sysDesc
object.ro SnmpAdminString .1.3.111.2.802.1.1.13.1.3.4 |
lldpV2LocSysCapSupportedThe bitmap value used to identify which system capabilities
are supported on the local system.ro LldpV2SystemCapabilitiesMap (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.3.5 |
lldpV2LocSysCapEnabledThe bitmap value used to identify which system capabilities
are enabled on the local system.ro LldpV2SystemCapabilitiesMap (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.3.6 |
lldpV2LocPortTableThis table contains one row per port
of information associated with the local
system known to this agent. SEQUENCE OF LldpV2LocPortEntry .1.3.111.2.802.1.1.13.1.3.7 |
lldpV2LocPortEntryInformation about a particular port component.
Entries may be created and deleted in this table by the
agent.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots. LldpV2LocPortEntry .1.3.111.2.802.1.1.13.1.3.7.1 |
lldpV2LocPortIfIndexThe interface index value used to identify the port
associated with this entry. Its value is an index
into the interfaces MIB
The value of this object is used as an index to the
lldpV2LocPortTable. InterfaceIndex (IF-MIB) .1.3.111.2.802.1.1.13.1.3.7.1.1 |
lldpV2LocPortIdSubtypeThe type of port identifier encoding used in the associated
'lldpLocPortId' object.ro LldpV2PortIdSubtype (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.3.7.1.2 |
lldpV2LocPortIdThe string value used to identify the port component
associated with a given port in the local system.ro LldpV2PortId (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.3.7.1.3 |
lldpV2LocPortDescThe string value used to identify the IEEE 802 LAN station's port
description associated with the local system. If the local
agent supports IETF RFC 2863, lldpLocPortDesc object should
have the same value of ifDescr object.ro SnmpAdminString .1.3.111.2.802.1.1.13.1.3.7.1.4 |
lldpV2LocManAddrTableThis table contains management address information on the
local system known to this agent. SEQUENCE OF LldpV2LocManAddrEntry .1.3.111.2.802.1.1.13.1.3.8 |
lldpV2LocManAddrEntryManagement address information about a particular chassis
component. There may be multiple management addresses
configured on the system identified by a particular
lldpLocChassisId. Each management address should have
distinct 'management address type' (lldpV2LocManAddrSubtype) and
'management address' (lldpLocManAddr.)
Entries may be created and deleted in this table by the
agent.
Since a variable length octetstring is used as an index
in a table, the address length is encoded as part of the OID
(as per IETF RFC 2578). LldpV2LocManAddrEntry .1.3.111.2.802.1.1.13.1.3.8.1 |
lldpV2LocManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object.
It should be noted that only a subset of the possible
address encodings enumerated in AddressFamilyNumbers
are appropriate for use as a LLDP management
address, either because some are just not applicable or
because the maximum size of a LldpV2ManAddress octet string
would prevent the use of some address identifier encodings. AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.111.2.802.1.1.13.1.3.8.1.1 |
lldpV2LocManAddrThe string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity. LldpV2ManAddress (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.3.8.1.2 |
lldpV2LocManAddrLenThe total length of the management address subtype and the
management address fields in LLDPDUs transmitted by the
local LLDP agent.
The management address length field is needed so that the
receiving systems that do not implement SNMP are not
required to implement an iana family numbers/address length
equivalency table in order to decode the management address.ro Unsigned32 .1.3.111.2.802.1.1.13.1.3.8.1.3 |
lldpV2LocManAddrIfSubtypeThe enumeration value that identifies the interface numbering
method used for defining the interface number
(lldpV2LocManAddrIfId), associated with the local system.ro LldpV2ManAddrIfSubtype (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.3.8.1.4 |
lldpV2LocManAddrIfIdThe integer value used to identify the interface number
regarding the management address component associated with
the local system.ro Unsigned32 .1.3.111.2.802.1.1.13.1.3.8.1.5 |
lldpV2LocManAddrOIDThe OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the local system agent.ro OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.3.8.1.6 |
lldpV2RemoteSystemsData OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.4 |
lldpV2RemTableThis table contains one or more rows per physical network
connection known to this agent. The agent may wish to ensure
that only one lldpRemEntry is present for each local port
and destination MAC address,
or it may choose to maintain multiple lldpRemEntries for
the same local port and destination MAC address.
The following procedure may be used to retrieve remote
systems information updates from an LLDP agent:
1. NMS polls all tables associated with remote systems
and keeps a local copy of the information retrieved.
NMS polls periodically the values of the following
objects:
a. lldpV2StatsRemTablesInserts
b. lldpV2StatsRemTablesDeletes
c. lldpV2StatsRemTablesDrops
d. lldpV2StatsRemTablesAgeouts
e. lldpV2StatsRxPortAgeoutsTotal for all ports.
2. LLDP agent updates remote systems MIB objects, and
sends out notifications to a list of notification
destinations.
3. NMS receives the notifications and compares the new
values of objects listed in step 1.
Periodically, NMS should poll the object
lldpV2StatsRemTablesLastChangeTime to find out if anything
has changed since the last poll. if something has
changed, NMS polls the objects listed in step 1 to
figure out what kind of changes occurred in the tables.
if value of lldpV2StatsRemTablesInserts has changed,
then NMS walks all tables by employing TimeFilter
with the last-polled time value. This request
returns new objects or objects whose values have been
updated since the last poll.
if value of lldpV2StatsRemTablesAgeouts has changed,
then NMS walks the lldpStatsRxPortAgeoutsTotal and
compares the new values with previously recorded ones.
For ports whose lldpStatsRxPortAgeoutsTotal value is
greater than the recorded value, NMS can
retrieve objects associated with those ports from
table(s) without employing a TimeFilter (which is
performed by specifying 0 for the TimeFilter.)
lldpV2StatsRemTablesDeletes and lldpV2StatsRemTablesDrops
objects are provided for informational purposes. SEQUENCE OF LldpV2RemEntry .1.3.111.2.802.1.1.13.1.4.1 |
lldpV2RemEntryInformation about a particular physical network connection.
Entries may be created and deleted in this table by the agent,
if a physical topology discovery process is active.
Rows in this table can only be created for MAC addresses
that can validly be used in association with the type of
interface concerned, as defined by table 8-2.
The contents of this table is persistent across
re-initializations or re-boots. LldpV2RemEntry .1.3.111.2.802.1.1.13.1.4.1.1 |
lldpV2RemTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 4502 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works. TimeFilter (RMON2-MIB) .1.3.111.2.802.1.1.13.1.4.1.1.1 |
lldpV2RemLocalIfIndexThe interface index value used to identify the port
associated with this entry. Its value is an index
into the interfaces MIB
The value of this object is used as an index to the
lldpV2RemTable. InterfaceIndex (IF-MIB) .1.3.111.2.802.1.1.13.1.4.1.1.2 |
lldpV2RemLocalDestMACAddressThe index value used to identify the destination
MAC address associated with this entry. Its value identifies
the row in the lldpV2DestAddressTable where the MAC address
can be found.
The value of this object is used as an index to the
lldpV2RemTable. LldpV2DestAddressTableIndex (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.4.1.1.3 |
lldpV2RemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
can wrap between reboots. Unsigned32 .1.3.111.2.802.1.1.13.1.4.1.1.4 |
lldpV2RemChassisIdSubtypeThe type of encoding used to identify the chassis associated
with the remote system.ro LldpV2ChassisIdSubtype (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.4.1.1.5 |
lldpV2RemChassisIdThe string value used to identify the chassis component
associated with the remote system.ro LldpV2ChassisId (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.4.1.1.6 |
lldpV2RemPortIdSubtypeThe type of port identifier encoding used in the associated
'lldpRemPortId' object.ro LldpV2PortIdSubtype (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.4.1.1.7 |
lldpV2RemPortIdThe string value used to identify the port component
associated with the remote system.ro LldpV2PortId (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.4.1.1.8 |
lldpV2RemPortDescThe string value used to identify the description of
the given port associated with the remote system.ro SnmpAdminString .1.3.111.2.802.1.1.13.1.4.1.1.9 |
lldpV2RemSysNameThe string value used to identify the system name of the
remote system.ro SnmpAdminString .1.3.111.2.802.1.1.13.1.4.1.1.10 |
lldpV2RemSysDescThe string value used to identify the system description
of the remote system.ro SnmpAdminString .1.3.111.2.802.1.1.13.1.4.1.1.11 |
lldpV2RemSysCapSupportedThe bitmap value used to identify which system capabilities
are supported on the remote system.ro LldpV2SystemCapabilitiesMap (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.4.1.1.12 |
lldpV2RemSysCapEnabledThe bitmap value used to identify which system capabilities
are enabled on the remote system.ro LldpV2SystemCapabilitiesMap (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.4.1.1.13 |
lldpV2RemRemoteChangesIndicates that there are changes in the remote systems
MIB, as determined by the variable remoteChanges.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.4.1.1.14 |
lldpV2RemTooManyNeighborsIndicates that there are too many neighbors
as determined by the variable tooManyNeighbors.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.13.1.4.1.1.15 |
lldpV2RemManAddrTableThis table contains one or more rows per management address
information on the remote system learned on a particular port
contained in the local chassis known to this agent. SEQUENCE OF LldpV2RemManAddrEntry .1.3.111.2.802.1.1.13.1.4.2 |
lldpV2RemManAddrEntryManagement address information about a particular chassis
component. There may be multiple management addresses
configured on the remote system identified by a particular
lldpRemIndex whose information is received on
an interface of the local system and a given destination
MAC address. Each management
address should have distinct 'management address
type' (lldpRemManAddrSubtype) and 'management address'
(lldpRemManAddr.)
Entries may be created and deleted in this table by the
agent.
Since a variable length octetstring is used as an index
in a table, theaddress length is encoded as part of the OID
(as per IETF RFC 2578). LldpV2RemManAddrEntry .1.3.111.2.802.1.1.13.1.4.2.1 |
lldpV2RemManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpRemManagmentAddr' object.
It should be noted that only a subset of the possible
address encodings enumerated in AddressFamilyNumbers
are appropriate for use as a LLDP management
address, either because some are just not apliccable or
because the maximum size of a LldpV2ManAddress octet string
would prevent the use of some address identifier encodings. AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.111.2.802.1.1.13.1.4.2.1.1 |
lldpV2RemManAddrThe string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity. LldpV2ManAddress (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.4.2.1.2 |
lldpV2RemManAddrIfSubtypeThe enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the remote system.ro LldpV2ManAddrIfSubtype (LLDP-V2-TC-MIB) .1.3.111.2.802.1.1.13.1.4.2.1.3 |
lldpV2RemManAddrIfIdThe integer value used to identify the interface number
regarding the management address component associated with
the remote system. The value depends upon the value of the
lldpV2RemManAddrIfSubtype for the table row.ro Unsigned32 .1.3.111.2.802.1.1.13.1.4.2.1.4 |
lldpV2RemManAddrOIDThe OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent.ro OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.4.2.1.5 |
lldpV2RemUnknownTLVTableThis table contains information about an incoming TLV which
is not recognized by the receiving LLDP agent. The TLV may
be from a later version of the basic management set.
This table should only contain TLVs that are found in
a single LLDP frame. Entries in this table, associated
with an MAC service access point (MSAP, the access point
for MAC services provided to the LCC sublayer, defined
in IEEE 100, which is also identified with a particular
lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with
most recently received unrecognized TLV from the same MSAP,
or they naturally age out when the rxInfoTTL timer
(associated with the MSAP) expires. SEQUENCE OF LldpV2RemUnknownTLVEntry .1.3.111.2.802.1.1.13.1.4.3 |
lldpV2RemUnknownTLVEntryInformation about an unrecognized TLV received from a
physical network connection. Entries may be created and
deleted in this table by the agent, if a physical topology
discovery process is active. LldpV2RemUnknownTLVEntry .1.3.111.2.802.1.1.13.1.4.3.1 |
lldpV2RemUnknownTLVTypeThis object represents the value extracted from the type
field of the TLV. Unsigned32 .1.3.111.2.802.1.1.13.1.4.3.1.1 |
lldpV2RemUnknownTLVInfoThis object represents the value extracted from the value
field of the TLV.ro OCTET STRING .1.3.111.2.802.1.1.13.1.4.3.1.2 |
lldpV2RemOrgDefInfoTableThis table contains one or more rows per physical network
connection which advertises the organizationally defined
information.
Note that this table contains one or more rows of
organizationally defined information that is not recognized
by the local agent.
If the local system is capable of recognizing any
organizationally defined information, appropriate extension
MIBs from the organization should be used for information
retrieval. SEQUENCE OF LldpV2RemOrgDefInfoEntry .1.3.111.2.802.1.1.13.1.4.4 |
lldpV2RemOrgDefInfoEntryInformation about the unrecognized organizationally
defined information advertised by the remote system.
The lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex,
lldpRemOrgDefInfoOUI, lldpRemOrgDefInfoSubtype, and
lldpRemOrgDefInfoIndex are indexes to this table. If there is
an lldpRemOrgDefInfoEntry associated with a particular remote
system identified by the lldpRemLocalPortNum and lldpRemIndex,
then there is an lldpRemEntry associated with the same
instance (i.e, using same indexes.) When the lldpRemEntry
for the same index is removed from the lldpRemTable, the
associated lldpRemOrgDefInfoEntry is removed from
the lldpRemOrgDefInfoTable.
Entries may be created and deleted in this table by the
agent. LldpV2RemOrgDefInfoEntry .1.3.111.2.802.1.1.13.1.4.4.1 |
lldpV2RemOrgDefInfoOUIThe Organizationally Unique Identifier (OUI), as defined
in IEEE Std 802, is a 24 bit (three octets) globally
unique assigned number referenced by various standards,
of the information received from the remote system. OCTET STRING .1.3.111.2.802.1.1.13.1.4.4.1.1 |
lldpV2RemOrgDefInfoSubtypeThe integer value used to identify the subtype of the
organizationally defined information received from the
remote system.
The subtype value is required to identify different instances
of organizationally defined information that could not be
retrieved without a unique identifier that indicates the
particular type of information contained in the information
string. Unsigned32 .1.3.111.2.802.1.1.13.1.4.4.1.2 |
lldpV2RemOrgDefInfoIndexThis object represents an arbitrary local integer value
used by this agent to identify a particular unrecognized
organizationally defined information instance, unique only
for the lldpRemOrgDefInfoOUI and lldpRemOrgDefInfoSubtype
from the same remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the
lldpRemOrgDefInfoIndex can wrap between reboots. Unsigned32 .1.3.111.2.802.1.1.13.1.4.4.1.3 |
lldpV2RemOrgDefInfoThe string value used to identify the organizationally
defined information of the remote system. The encoding for
this object should be as defined for SnmpAdminString TC.ro OCTET STRING .1.3.111.2.802.1.1.13.1.4.4.1.4 |
lldpV2Extensions OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.1.5 |
lldpV2Conformance OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.2 |
lldpV2Compliances OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.2.1 |
lldpV2Groups OBJECT IDENTIFIER .1.3.111.2.802.1.1.13.2.2 |