IEEE8021-SPB-MIB
802.1Q SPB MIB
Copyright (C) IEEE (2014). All Rights Reserved This MIB module is part of IEEE 802.1Q; See the IEEE 802.1Q standard for full legal notices.
Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014
Main OID:
ieee8021SpbMib.1.3.111.2.802.1.1.26
122
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
122 total| Object Name |
|---|
ieee8021SpbMib802.1Q SPB MIB
Copyright (C) IEEE (2014). All Rights Reserved
This MIB module is part of IEEE 802.1Q;
See the IEEE 802.1Q standard for full legal notices.
Unless otherwise indicated, the references in this
MIB module are to IEEE Std 802.1Q-2014 MODULE-IDENTITY .1.3.111.2.802.1.1.26 |
ieee8021SpbObjects OBJECT IDENTIFIER .1.3.111.2.802.1.1.26.1 |
ieee8021SpbSys OBJECT IDENTIFIER .1.3.111.2.802.1.1.26.1.1 |
ieee8021SpbSysAreaAddressThe three byte IS-IS Area Address to join. Normally
SPB will use area 00:00:00 however if SPB is being
used in conjunction with IPV4/V6 it may operate
using the IS-IS area address already in use.
This object is persistent.rw IEEE8021SpbAreaAddress .1.3.111.2.802.1.1.26.1.1.1 |
ieee8021SpbSysIdSYS ID used for all SPB instances on this Bridge.
A six byte network wide unique identifier. This is
defaulted to the Bridge Address initially but may
be overridden.
This object is persistent.rw MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.1.2 |
ieee8021SpbSysControlAddrGroup MAC that the ISIS control plane will use. SPB may
use a number of different addresses for SPB Hello and
LSP exchange. Section 27.2, 8.13.5.2, and Table 8-13 cover
the different choices. The choices are as follows:
01:80:C2:00:00:14 = All Level 1 Intermediate Systems
01:80:C2:00:00:15 = All Level 2 Intermediate Systems
09:00:2B:00:00:05 = All Intermediate Systems.
01:80:C2:00:00:2E = All Provider Bridge Intermediate Systems.
01:80:C2:00:00:2F = All Customer Bridge Intermediate Systems.
This object is persistent.rw MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.1.3 |
ieee8021SpbSysNameName to be used to refer to this SPB Bridge. This is advertised
in IS-IS and used for management.ro SnmpAdminString .1.3.111.2.802.1.1.26.1.1.4 |
ieee8021SpbSysBridgePriorityThis is a 16 bit quantity which ranks this SPB Bridge
relative to others when breaking ties. This priority
is the high 16 bits of the Bridge Identifier. Its impact
depends on the tie breaking algorithm. Recommend
values 0..15 be assigned to core switches to ensure
diversity of the ECT Algorithms.ro IEEE8021SpbBridgePriority .1.3.111.2.802.1.1.26.1.1.5 |
ieee8021SpbmSysSPSourceIdThe Shortest Path Source Identifier.
It is the high order 3 bytes for Group Address DA from this
Bridge.
Note that only the 20 bits not including the top 4 bits are
the SPSourceID.
This object is persistent.rw IEEE8021SpbmSPsourceId .1.3.111.2.802.1.1.26.1.1.6 |
ieee8021SpbvSysModeIndication of supporting SPBV mode
auto(=1)/manual(=2)
auto => enable SPBV mode and auto allocate SPVIDs.
manual => enable SPBV mode and manually assign SPVIDs.
This object is persistent.rw IEEE8021SpbMode .1.3.111.2.802.1.1.26.1.1.7 |
ieee8021SpbmSysModeIndication of supporting SPBM mode
auto(=1)/manual(=2)
auto => enable SPBM mode and auto allocate SPsourceID.
manual => enable SPBM mode and manually assign SPsourceID.
This object is persistent.rw IEEE8021SpbMode .1.3.111.2.802.1.1.26.1.1.8 |
ieee8021SpbSysDigestConventionThe Agreement Digest convention setting
off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3)
off => disable agreement digest checking in hellos
loopFreeBoth => block unsafe group and individual
traffic when digests disagree.
loopFreeMcastOnly =>block unsafe group traffic when
digests disagree.
This object is persistent.rw IEEE8021SpbDigestConvention .1.3.111.2.802.1.1.26.1.1.9 |
ieee8021SpbMtidStaticTableA Table of multiple logical topologies - MT. SEQUENCE OF Ieee8021SpbMtidStaticTableEntry .1.3.111.2.802.1.1.26.1.2 |
ieee8021SpbMtidStaticTableEntryThis table configures a MTID to a topology index. A
topology index uniquely identifies a specific ISIS
topology enabling multiple instances or multiple
MTIDs within an instance. Ieee8021SpbMtidStaticTableEntry .1.3.111.2.802.1.1.26.1.2.1 |
ieee8021SpbMtidStaticEntryMtidISIS Multi Topology Identifier MTID
Each MTID defines logical topology and is used
to enable multiple SPB instances within one ISIS instance. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.2.1.1 |
ieee8021SpbMTidStaticEntryMtidOverloadWhen set for this logical topology this Bridge can only
originate or terminate traffic. It cannot transit SPB
encapsulated traffic. This is the IS-IS overload feature
specific to an SPB IS-IS MTID logical topology.
This object is persistent.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.2.1.2 |
ieee8021SpbMtidStaticEntryRowStatusThe object indicates the status of an entry, and is used
to create/delete entries. This object is persistent.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.2.1.3 |
ieee8021SpbTopIxUnique identifier of this SPB topology
This is index is allocated for this ISIS/MT instance.
It is used as an index to most other SPB tables below and to
select the exact ISIS instance and which MT instance together. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.2.1.4 |
ieee8021SpbTopIxDynamicTableThis table is for SPB dynamic information. The dynamic
information that is sent in this Bridges Hellos. SEQUENCE OF Ieee8021SpbTopIxDynamicTableEntry .1.3.111.2.802.1.1.26.1.3 |
ieee8021SpbTopIxDynamicTableEntryThis table displays the digest information computed for
this Bridge.
A Bridge configures this information in MTID 0 only. Ieee8021SpbTopIxDynamicTableEntry .1.3.111.2.802.1.1.26.1.3.1 |
ieee8021SpbTopIxDynamicEntryTopIxISIS-SPB Topology Index identifier
Each Topology Index defines logical topology and is used
to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.3.1.1 |
ieee8021SpbTopIxDynamicEntryAgreeDigestThe topology agreement digest value. Digest of all
topology information, as in clause 28.4.ro IEEE8021SpbDigest .1.3.111.2.802.1.1.26.1.3.1.2 |
ieee8021SpbTopIxDynamicEntryMCIDThe MST Identifier MCID. The MCID is a digest of the
VID to MSTID configuration table which determines the
Base VIDs enabled for SPBV and SPBM.ro IEEE8021SpbMCID .1.3.111.2.802.1.1.26.1.3.1.3 |
ieee8021SpbTopIxDynamicEntryAuxMCIDThe aux MST Identifier for migration.
Either MCID or AuxMCID must match for adjacency to form.ro IEEE8021SpbMCID .1.3.111.2.802.1.1.26.1.3.1.4 |
ieee8021SpbEctStaticTableThe Equal Cost Tree (ECT) static configuration table. SEQUENCE OF Ieee8021SpbEctStaticTableEntry .1.3.111.2.802.1.1.26.1.4 |
ieee8021SpbEctStaticTableEntryThe Equal Cost Tree static configuration Table defines the
ECT-ALGORITHM for the Base VID and if SPBV is used for
the SPVID. Ieee8021SpbEctStaticTableEntry .1.3.111.2.802.1.1.26.1.4.1 |
ieee8021SpbEctStaticEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.4.1.1 |
ieee8021SpbEctStaticEntryBaseVidBase VID to use for this ECT-ALGORITHM.
Traffic B-VID (SPBM) or Management VID (SPBV).
A Base VID value of 4095 is a wildcard for any Base VID
assigned to SPB operation. VlanIdOrAny (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.26.1.4.1.2 |
ieee8021SpbEctStaticEntryEctAlgorithmThis identifies the tie-breaking algorithms used in
Shortest Path Tree computation. Values range from
00-80-c2-01 to 00-80-c2-16 for 802.1 for each
the 16 ECT behaviors. The default is 00-80-c2-01
the LowPATHID.
This object is persistent.rw IEEE8021SpbEctAlgorithm .1.3.111.2.802.1.1.26.1.4.1.3 |
ieee8021SpbvEctStaticEntrySpvidIf SPBV mode this is the VID originating from this Bridge.
This input is ignored if ieee8021SpbvSysMode is auto(1),
but the output always returns the SPVID in use.
Otherwise in SPBM this is empty, should be set = 0.
This object is persistent.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.26.1.4.1.4 |
ieee8021SpbEctStaticEntryRowStatusThe object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.4.1.5 |
ieee8021SpbEctDynamicTableA table containing Data about the ECT behavior on
this Bridge SEQUENCE OF Ieee8021SpbEctDynamicTableEntry .1.3.111.2.802.1.1.26.1.5 |
ieee8021SpbEctDynamicTableEntryThis table can be used to check that neighbor Bridges are
using the same ECT Algorithm. Ieee8021SpbEctDynamicTableEntry .1.3.111.2.802.1.1.26.1.5.1 |
ieee8021SpbEctDynamicEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.5.1.1 |
ieee8021SpbEctDynamicEntryBaseVidThe Base VID being queried. Base VID
define the mode in the VID to MSTID table. VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.26.1.5.1.2 |
ieee8021SpbEctDynamicEntryModeThe Operating mode of this Base VID.
SPBM (=2), SPBV (=3), or disabled or none (1).ro IEEE8021SpbEctMode .1.3.111.2.802.1.1.26.1.5.1.3 |
ieee8021SpbEctDynamicEntryLocalUseThis value indicates the ECT is in use locally
(True/False) for this Base Vid. ECTs may be defined before
services are assigned.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.5.1.4 |
ieee8021SpbEctDynamicEntryRemoteUseThis value indicates the remote ECT is in use
(True/False) for this Base Vid. ECTs may be defined
before services are assigned.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.5.1.5 |
ieee8021SpbEctDynamicEntryIngressCheckDiscardsThe number of SA check failures on this ECT VID
This is referred to as the ingress check and this
counter increments whenever a packet is discarded
for this VID because it has not come from an
interface which is on the shortest path
to its SA.ro Unsigned32 .1.3.111.2.802.1.1.26.1.5.1.6 |
ieee8021SpbAdjStaticTableA table containing the SPB configuration data for a neighbor SEQUENCE OF Ieee8021SpbAdjStaticTableEntry .1.3.111.2.802.1.1.26.1.6 |
ieee8021SpbAdjStaticTableEntryThis table can be used to display the interfaces and metrics
of a neighbor Bridge. Ieee8021SpbAdjStaticTableEntry .1.3.111.2.802.1.1.26.1.6.1 |
ieee8021SpbAdjStaticEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.6.1.1 |
ieee8021SpbAdjStaticEntryIfIndexThe System interface/index which defines this
adjacency. A value of 0 is a wildcard for any
interface on which SPB Operation is supported. InterfaceIndexOrZero (IF-MIB) .1.3.111.2.802.1.1.26.1.6.1.2 |
ieee8021SpbAdjStaticEntryMetricThe ieee8021Spb metric (incremental cost) to this peer.
The contribution of this link to total path cost.
Recommended values are inversely proportional to link speed.
Range is (1..16777215) where 16777215 (0xFFFFFF) is
infinity; infinity signifies that the adjacency is
UP, but is not to be used for traffic.
This object is persistent.rw IEEE8021SpbLinkMetric .1.3.111.2.802.1.1.26.1.6.1.3 |
ieee8021SpbAdjStaticEntryIfAdminStateThe administrative state of this interface/port.
Up is the default.
This object is persistent.rw IEEE8021SpbAdjState .1.3.111.2.802.1.1.26.1.6.1.4 |
ieee8021SpbAdjStaticEntryRowStatusThe object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.6.1.5 |
ieee8021SpbAdjDynamicTableThe SPB neighbor dynamic information table. SEQUENCE OF Ieee8021SpbAdjDynamicTableEntry .1.3.111.2.802.1.1.26.1.7 |
ieee8021SpbAdjDynamicTableEntryThis table is used to determine operational values of digests
and interfaces of neighbor Bridges. Ieee8021SpbAdjDynamicTableEntry .1.3.111.2.802.1.1.26.1.7.1 |
ieee8021SpbAdjDynamicEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.7.1.1 |
ieee8021SpbAdjDynamicEntryIfIndexSystem interface/index which defines this adjacency
A value of 0 is a wildcard for any interface
on which SPB Operation is enabled. InterfaceIndexOrZero (IF-MIB) .1.3.111.2.802.1.1.26.1.7.1.2 |
ieee8021SpbAdjDynamicEntryPeerSysIdThe SPB System Identifier of this peer. This is used to
identify a neighbor uniquely. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.7.1.3 |
ieee8021SpbAdjDynamicEntryPortThe port number to reach this adjacency.ro IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.26.1.7.1.4 |
ieee8021SpbAdjDynamicEntryIfOperStateThe operational state of this port.
up, down or testing (in test).ro IEEE8021SpbAdjState .1.3.111.2.802.1.1.26.1.7.1.5 |
ieee8021SpbAdjDynamicEntryPeerSysNameIS-IS system name of peer.
This is the ASCII name assigned to the Bridge to aid
management. It is the same as the ieee8021SpbSysName.ro SnmpAdminString .1.3.111.2.802.1.1.26.1.7.1.6 |
ieee8021SpbAdjDynamicEntryPeerAgreeDigestThe peer topology agreement digest value
(all of the elements defined in clause 28.4).
If it does not match this Bridge's digest it indicates
loss of synchronization.ro IEEE8021SpbDigest .1.3.111.2.802.1.1.26.1.7.1.7 |
ieee8021SpbAdjDynamicEntryPeerMCIDThe peer MST Identifier MCID. The MCID is a digest of the
VID to MSTID configuration table which determines the
Base VIDs enabled for SPBV and SPBM.ro IEEE8021SpbMCID .1.3.111.2.802.1.1.26.1.7.1.8 |
ieee8021SpbAdjDynamicEntryPeerAuxMCIDThe peer auxiliary MST Identifier. This MCID is
used for migration.ro IEEE8021SpbMCID .1.3.111.2.802.1.1.26.1.7.1.9 |
ieee8021SpbAdjDynamicEntryLocalCircuitIDThe value used by IS-IS to identify this adjacency locally.ro Unsigned32 .1.3.111.2.802.1.1.26.1.7.1.10 |
ieee8021SpbAdjDynamicEntryPeerLocalCircuitIDThe value used by peer IS-IS to identify this adjacency
remotely.ro Unsigned32 .1.3.111.2.802.1.1.26.1.7.1.11 |
ieee8021SpbAdjDynamicEntryPortIdentifierThe value for this Bridge which has been selected by
IS-IS to form this adjacency if there is more than 1
candidate link.ro Unsigned32 .1.3.111.2.802.1.1.26.1.7.1.12 |
ieee8021SpbAdjDynamicEntryPeerPortIdentifierThe value for peer port Identifier selected by IS-IS
to form this adjacency if there is more than 1
candidate link.ro Unsigned32 .1.3.111.2.802.1.1.26.1.7.1.13 |
ieee8021SpbAdjDynamicEntryIsisCircIndexThe isisCircTable reference. This allows cross referencing
to an IS-IS MIB.ro Unsigned32 .1.3.111.2.802.1.1.26.1.7.1.14 |
ieee8021SpbTopNodeTableTable of network specific Bridge information. SEQUENCE OF Ieee8021SpbTopNodeTableEntry .1.3.111.2.802.1.1.26.1.8 |
ieee8021SpbTopNodeTableEntryThis table is used to display system level information about
Bridges in the network. Ieee8021SpbTopNodeTableEntry .1.3.111.2.802.1.1.26.1.8.1 |
ieee8021SpbTopNodeEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.8.1.1 |
ieee8021SpbTopNodeEntrySysIdThe IS-IS System ID of a Bridge in the SPB
LSP database and hence the network.
A value of 0 is a wildcard for all System identifiers. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.8.1.2 |
ieee8021SpbTopNodeEntryBridgePriorityThe Bridge Priority of the Bridge in the LSP database.
This is a 16 bit quantity which ranks this SPB Bridge
relative to others when breaking ties. This priority
is the high 16 bits of the Bridge Identifier. Its impact
depends on the tie breaking algorithm. Recommend
values 0..15 be assigned to core switches to ensure
diversity of the ECT Algorithms.ro IEEE8021SpbBridgePriority .1.3.111.2.802.1.1.26.1.8.1.3 |
ieee8021SpbmTopNodeEntrySPsourceIDThe Shortest Path Source Identifier.
It is the high order 3 bytes for Group Address DA from this
Bridge. Note that only the 20 bits not including the
top 4 bits are the SPSourceID.ro IEEE8021SpbmSPsourceId .1.3.111.2.802.1.1.26.1.8.1.4 |
ieee8021SpbTopNodeEntrySysNameThe System Name. A Human readable name of this Bridge
This is used to aid in management and is used in
place of the System identifier in many commands
and displays.ro SnmpAdminString .1.3.111.2.802.1.1.26.1.8.1.5 |
ieee8021SpbTopEctTableTable of all ECT use in the network SEQUENCE OF Ieee8021SpbTopEctTableEntry .1.3.111.2.802.1.1.26.1.9 |
ieee8021SpbTopEctTableEntryThis table lists Bridges and the ECT Algorithms
configured and in use. Ieee8021SpbTopEctTableEntry .1.3.111.2.802.1.1.26.1.9.1 |
ieee8021SpbTopEctEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.9.1.1 |
ieee8021SpbTopEctEntrySysIdThe system ID which is using a particular ECT.
A value of 0 is a wildcard for all System identifiers. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.9.1.2 |
ieee8021SpbTopEctEntryBaseVidBase VID related to this algorithm
In the case of SPBM this is the B-VID that carries
traffic for this ECT-ALGORITHM. In the case of SPBV
this is the Base-VID used for management.
A Base VID value of 4095 is a wildcard for any Base VID
assigned to SPB operation. VlanIdOrAny (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.26.1.9.1.3 |
ieee8021SpbTopEctEntryEctAlgorithmThe ECT-ALGORITHM in use.
A 32 bit number. The ISIS Topology Index identifier to
which this instance belongs. Each Topology Index defines
logical topology and is used to enable multiple SPB
instances within several ISIS instances; the upper 24
bits are an OUI or a CID and the lower 8 bits are an index. This
creates a world-wide unique identity for the computation
that will be using the VID thus ensuring consistency.ro IEEE8021SpbEctAlgorithm .1.3.111.2.802.1.1.26.1.9.1.4 |
ieee8021SpbTopEctEntryModeOperating mode : SPBM (=2) or SPBV (=3)ro IEEE8021SpbEctMode .1.3.111.2.802.1.1.26.1.9.1.5 |
ieee8021SpbvTopEctSysModeIndication of supporting SPBV mode
auto(=1)/manual(=2)
auto => SPBV mode and auto allocate SPVIDs.
manual => SPBV mode and manually assign SPVIDs.ro IEEE8021SpbMode .1.3.111.2.802.1.1.26.1.9.1.6 |
ieee8021SpbvTopEctEntrySpvidSPVID in V mode
The VID this Bridge will use to originate traffic
using this ECT-ALGORITHM when running in SPBV mode.ro VlanIdOrNone (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.26.1.9.1.7 |
ieee8021SpbTopEctEntryLocalUseIs this ECT-ALGORITHM in use locally by advertising
Bridge :- TRUE or FALSE. This is used to help with
disruption-free migration between ECT-ALGORITHM values.
Changes are only allowed if this flag is FALSE.ro TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.9.1.8 |
ieee8021SpbTopEdgeTableA Table of edges in network (not duplicated),
but each link will appear as two entries, one
ordered {near-far}, the other {far-near}. SEQUENCE OF Ieee8021SpbTopEdgeTableEntry .1.3.111.2.802.1.1.26.1.10 |
ieee8021SpbTopEdgeTableEntryThe table lists information about Bridge edges (links). Ieee8021SpbTopEdgeTableEntry .1.3.111.2.802.1.1.26.1.10.1 |
ieee8021SpbTopEdgeEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.10.1.1 |
ieee8021SpbTopEdgeEntrySysIdNearThe System ID of near Bridge (the Bridge
reporting the adjacency).
A value of 0 is a wildcard for all System identifiers. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.10.1.2 |
ieee8021SpbTopEdgeEntrySysIdFarThe System ID of far Bridge (the neighbor
of the Bridge reporting).
A value of 0 is a wildcard for all System identifiers. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.10.1.3 |
ieee8021SpbTopEdgeEntryMetricNear2FarThe metric used on this edge advertised by near end
This is the raw value. If it is less than the
MetricFar2Near (below), the MetricFar2Near is
used as the SPF metric in both directions.ro IEEE8021SpbLinkMetric .1.3.111.2.802.1.1.26.1.10.1.4 |
ieee8021SpbTopEdgeEntryMetricFar2NearThe metric used on this edge advertised by far end
This is the raw value. If it is less than the
MetricNear2Far (above), the MetricNear2Far is
used as the SPF metric in both directions.ro IEEE8021SpbLinkMetric .1.3.111.2.802.1.1.26.1.10.1.5 |
ieee8021SpbmTopSrvTableAll SPBM PBB encapsulated services in this network. SEQUENCE OF Ieee8021SpbmTopSrvTableEntry .1.3.111.2.802.1.1.26.1.11 |
ieee8021SpbmTopSrvTableEntryThis table displays information about PBB services received
in the LSP data base. The Service Identifier is associated with
the MAC address and Base VID of the Bridge that originates or
terminates the service. Ieee8021SpbmTopSrvTableEntry .1.3.111.2.802.1.1.26.1.11.1 |
ieee8021SpbmTopSrvEntryTopIxEntry of one The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.11.1.1 |
ieee8021SpbmTopSrvEntrySysIdThe System identifier this service originates/terminates on.
A value of 0 is a wildcard for all System identifiers. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.11.1.2 |
ieee8021SpbmTopSrvEntryIsidAn ISID (service) originating/terminating on this Bridge.
A value of 0 is a wildcard for any ISID. IEEE8021SpbServiceIdentifierOrAny .1.3.111.2.802.1.1.26.1.11.1.3 |
ieee8021SpbmTopSrvEntryBaseVidThe Base VID associated with this service. The Base VID
determines the ECT Algorithm that is associated with this
service.
A Base VID value of 4095 is a wildcard for any Base VID
assigned to SPB operation. VlanIdOrAny (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.26.1.11.1.4 |
ieee8021SpbmTopSrvEntryMacThe MAC address associated with a service.
An additional nodal MAC address by which an I-SID
can be reached may be advertised, in which case
traffic to this MAC follows a forwarding path identical
to that taken to reach the corresponding SYSID (nodal) MAC.
If no additional MAC is advertised this will be the
SYSID MAC.
A value of 0 is a wildcard for the MAC address. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.11.1.5 |
ieee8021SpbmTopSrvEntryIsidFlagsA pair of flags defining the attributes of this
service. These specify independently whether ingress frames to
the SPBM region should be transmitted within it, and whether
frames received from the SPBM region are required to egress it.ro IEEE8021PbbIngressEgress (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.26.1.11.1.6 |
ieee8021SpbvTopSrvTableThe SPBV group services in this network SEQUENCE OF Ieee8021SpbvTopSrvTableEntry .1.3.111.2.802.1.1.26.1.12 |
ieee8021SpbvTopSrvTableEntryThis table displays information about SPBV group address.
The group address is a associated with MAC address and Base
VID of the Bridge that originates or terminates the service. Ieee8021SpbvTopSrvTableEntry .1.3.111.2.802.1.1.26.1.12.1 |
ieee8021SpbvTopSrvEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. IEEE8021SpbMTID .1.3.111.2.802.1.1.26.1.12.1.1 |
ieee8021SpbvTopSrvEntrySysIdThe System identifier advertising this group address.
A value of 0 is a wildcard for all System identifiers. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.12.1.2 |
ieee8021SpbvTopSrvEntryMMacThis Group MAC address entry.
A value of 0 is a wildcard for any Group MAC address. MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.12.1.3 |
ieee8021SpbvTopSrvEntryBaseVidThe Base VID associated with this service. The Base VID
determines the ECT Algorithm that is associated with
this service.ro VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.26.1.12.1.4 |
ieee8021SpbvTopSrvEntryMMacFlagsA pair of {ingress, egress} flags for this
Group Address, defining transmit/receive or both. This enables
filtering of Group addresses to interwork with MMRP.ro IEEE8021PbbIngressEgress (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.26.1.12.1.5 |
ieee8021SpbmBsiStaticTableTable of BSIs configured on this system and assigned to
an SPBM VID.
The table is indexed by
- ieee8021SpbTopIx from ieee8021SpbMtidStaticTable
indicating the ISIS-SPB topology instance into
which the BSI will be advertised,
- ieee8021BridgeBasePort from ieee8021PbbCbpTable
identifying the CPB on which the BSI is configured,
- an I-SID value identifying the BSI, and
- a VID value identifying a B-VID for which forwarding
state is to be installed for the BSI SEQUENCE OF Ieee8021SpbmBsiStaticEntry .1.3.111.2.802.1.1.26.1.13 |
ieee8021SpbmBsiStaticEntryThis table contains information about backbone services
configured on this system to be advertised by ISIS-SPB. Ieee8021SpbmBsiStaticEntry .1.3.111.2.802.1.1.26.1.13.1 |
ieee8021SpbmBsiStaticEntryIsidAn I-SID registered on the CBP identified
by ieee8021BridgeBasePort. IEEE8021PbbServiceIdentifier (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.26.1.13.1.1 |
ieee8021SpbmBsiStaticEntryBaseVidAn B-VID registered on the CBP identified
by ieee8021BridgeBasePort. VlanId (Q-BRIDGE-MIB) .1.3.111.2.802.1.1.26.1.13.1.2 |
ieee8021SpbmBsiStaticEntryTBitIf true(1), indicates the BSI transmits multicast
frames from this CBP.
This object is persistent.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.13.1.3 |
ieee8021SpbmBsiStaticEntryRBitIf true(1), indicates the BSI wishes to receive
multicast frames at this CBP.
This object is persistent.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.13.1.4 |
ieee8021SpbmBsiStaticEntryTsBitIf true(1), indicates the BSI transmits multicast
frames on a shared tree from this CBP.
This object is persistent.rw TruthValue (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.13.1.5 |
ieee8021SpbmBsiStaticEntryTieBreakMaskThe value used to create the Tie-Break Mask
for calculating multicast trees.
This object is persistent.rw Integer32 .1.3.111.2.802.1.1.26.1.13.1.6 |
ieee8021SpbmBsiStaticEntryRowStatusThis column holds the status for this row.
When the status is active, no columns of this table may be
modified.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.13.1.7 |
dot1agCfmMepSpbmTableThe additional objects configurable in SPBM MEPs SEQUENCE OF Dot1agCfmMepSpbmEntry .1.3.111.2.802.1.1.26.1.14 |
dot1agCfmMepSpbmEntryThe SPBM MEP table additions. Dot1agCfmMepSpbmEntry .1.3.111.2.802.1.1.26.1.14.1 |
dot1agCfmMepTransmitLbmSpbmDAThe MAC Address to be used as the LBM destination address
in an SPBM MA: A unicast or multicast address.rw MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.14.1.1 |
dot1agCfmMepTransmitLtmSpbmDAThe MAC Address to be used as the LTM destination address
in an SPBM MA: A unicast or multicast address.rw MacAddress (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.14.1.2 |
dot1agCfmMepSpbmEspTableThe SPBM ESP table contains path-tesid information for each
SPBM path MA known to a system.
This table uses three indices. The first two indices are the
indices of the Maintenance Domain and MA tables, the reason
being that a path-tesid is always related to an MA and
Maintenance Domain. SEQUENCE OF Dot1agCfmMepSpbmEspEntry .1.3.111.2.802.1.1.26.1.15 |
dot1agCfmMepSpbmEspEntryThe SPBM path MA ESP entry. Each entry refers to an
ESP by identifier and contains information about
one of the ESPs that comprise an SPBM path MA.
The Dot1agCfmMepSpbmEspEntry .1.3.111.2.802.1.1.26.1.15.1 |
dot1agCfmMepSpbmEspIndexThis is an identifier, of local signifigance to a particular
SPBM path MA which is used to index the ESPs associated
with that MA. Unsigned32 .1.3.111.2.802.1.1.26.1.15.1.1 |
dot1agCfmMepSpbmEspEspThis column holds the ESP identifier for one of the Ethernet
Switched Paths that define the SPBM path MA.
This object is persistent.rw IEEE8021PbbTeEsp (IEEE8021-TC-MIB) .1.3.111.2.802.1.1.26.1.15.1.2 |
dot1agCfmMepSpbmEspRowStatusThis column holds the status for this row.
When the status is active, no columns of this table may be
modified.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.111.2.802.1.1.26.1.15.1.3 |
ieee8021SpbConformance OBJECT IDENTIFIER .1.3.111.2.802.1.1.26.2 |
ieee8021SpbGroups OBJECT IDENTIFIER .1.3.111.2.802.1.1.26.2.1 |
ieee8021SpbCompliances OBJECT IDENTIFIER .1.3.111.2.802.1.1.26.2.2 |