HUAWEI-VECTOR-MIB
AI MIB Summary
The HUAWEI-VECTOR-MIB module enables the monitoring and configuration of vectoring parameters on Huawei DSL access equipment to mitigate crosstalk and optimize line performance. It provides access to specific metrics regarding vectoring group status, individual line vectoring enablement states, and crosstalk reduction efficiency counters.
This mib is used for defining huawei's vectoring management MIB objects. The MIB is used for vectoring, vectoring is a transmission method that employs the coordination of line signals for reduction of crosstalk levels and improvement of performance.
Main OID:
hwVectoringMIB.1.3.6.1.4.1.2011.6.171
75
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
hwVectoringMIBThis mib is used for defining huawei's vectoring management MIB objects.
The MIB is used for vectoring, vectoring is a transmission method that
employs the coordination of line signals for reduction of crosstalk levels
and improvement of performance. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.171 |
hwVectoringGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.171.1 |
hwVectoringSwitchEnable/Disable the global vectoring configuration.
Default values:disable.
Options:
1. enable(1) - Enables the global vectoring configuration
2. disable(2) - Disables the global vectoring configurationrw Enumeration .1.3.6.1.4.1.2011.6.171.1.1 |
hwVectoringLegacyCpeActivatePolicyVectoring legacy cpe activate policy.
Default values:limit.
Options:
1. no-limit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode
2. block(2) - The legacy cpe is not allowed to activated in G.993.2 operation mode
3. limit(3) - The legacy cpe is allowed to activated in G.993.2 operation mode,
with PSD auto shaped to eliminate the self-FEXT to vectoring lines
4. forceFriendlyDsLimitUs(4) - Force friendly is used in the downstream direction, and PSD automatic
shaping is used in the upstream direction
5. forceFriendlyDsNoLimitUs(5) - Force friendly is used in the downstream direction, and no restriction
is set for the upstream directionrw Enumeration .1.3.6.1.4.1.2011.6.171.1.2 |
hwVectoringBandplanTypeVectoring global frequency plan types.
Default values:bandplan998ade.
Options:
1. bandplanAnnexa(1) - The frequency plan types for the vectoring feature is Annex A
2. bandplanAnnexc(2) - The frequency plan types for the vectoring feature is Annex C
3. bandplan997e(3) - The frequency plan types for the vectoring feature is 997E
4. bandplan998ade(4) - The frequency plan types for the vectoring feature is 998ADE
5. bandplan998e(5) - The frequency plan types for the vectoring feature is 998E
6. bandplanHPE(6) - The frequency plan types for the vectoring feature is HPErw Enumeration .1.3.6.1.4.1.2011.6.171.1.3 |
hwVectoringUs0TypeVectoring us0 type.
Default values:us0TypeA.
Options:
1. us0TypeA(1) - US0 type is US0-type A
2. us0TypeB(2) - US0 type is US0-type B
3. us0TypeM(3) - US0 type is US0-type M
4. us0TypeN(4) - US0 type is US0-type N/A
5. invalidValue(-1) - US0 type return -1 when vectoring frequency plan types is Annex A/Annex Crw Enumeration .1.3.6.1.4.1.2011.6.171.1.4 |
hwVectoringAnnexALimitMaskAnnexA limit mask.
Options:
1. d32(1) - AnnexA limit mask is D-32
2. d48(2) - AnnexA limit mask is D-48
3. d64(3) - AnnexA limit mask is D-64
4. d128(4) - AnnexA limit mask is D-128
5. invalidValue(-1) - AnnexA limit mask return -1 when vectoring frequency plan types is not Annex Arw Enumeration .1.3.6.1.4.1.2011.6.171.1.5 |
hwVectoringLegacyCpeReservedBandThis object is used to set the reserved band of a legacy CPE.
This object takes effect when hwVectoringLegacyCpeActivatePolicy is set to limit.
Range of the subcarrier IDs: 0-6956. Two subcarriers are separated by a comma (,).
The format is: start subcarrier ID-end subcarrier ID.
The start subcarrier ID cannot be greater than the end subcarrier ID.
Only eight reserved band is supported, for example, 880-900,1000-1100.
The settings of hwVectoringLegacyCpeReservedBand and
hwVectoringLegacyCpeToneBlackoutBand cannot overlap with each other.rw OCTET STRING .1.3.6.1.4.1.2011.6.171.1.6 |
hwVectoringLegacyCpeToneBlackoutBandThis object is used to set the blackout band of a legacy CPE.
This object takes effect when hwVectoringLegacyCpeActivatePolicy is set to limit.
Range of the subcarrier IDs: 0-6956. Two subcarriers are separated by a comma (,).
The format is: start subcarrier ID-end subcarrier ID.
The start subcarrier ID cannot be greater than the end subcarrier ID.
Only eight tone blackout band is supported, for example, 1300-1320,1400-1500.
The settings of hwVectoringLegacyCpeReservedBand and
hwVectoringLegacyCpeToneBlackoutBand cannot overlap with each other.rw OCTET STRING .1.3.6.1.4.1.2011.6.171.1.7 |
hwVectoringGroupTableThe table hwVectoringGroupTable contains the vectoring group
configuration.
The index of this table is hwVectoringGroupIndex. SEQUENCE OF HwVectoringGroupEntry .1.3.6.1.4.1.2011.6.171.2 |
hwVectoringGroupEntryThe table hwVectoringGroupTable contains the vectoring group
configuration.
The index of this entry is hwVectoringGroupIndex. HwVectoringGroupEntry .1.3.6.1.4.1.2011.6.171.2.1 |
hwVectoringGroupIndexThis object identifies a row in this table. Unsigned32 .1.3.6.1.4.1.2011.6.171.2.1.1 |
hwVectoringGroupNotReqBandsUsThis configuration parameter shall be an array of pairs of
sub-carrier indices for uptream . Each pair represents the
start and stop sub-carrier index of a frequency band in which
FEXT cancellation is not required. Up to 8 frequency bands may
be configured.
for example :880-900,1000-1020rw OCTET STRING .1.3.6.1.4.1.2011.6.171.2.1.2 |
hwVectoringGroupNotReqBandsDsThis configuration parameter shall be an array of pairs of
sub-carrier indices for downstream . Each pair represents the
start and stop sub-carrier index of a frequency band in which
FEXT cancellation is not required. Up to 8 frequency bands may
be configured.
for example :1300-1320,1400-1450rw OCTET STRING .1.3.6.1.4.1.2011.6.171.2.1.3 |
hwVectoringGroupLinkListThis object defines the link list of the vectoring group.
This is a string of 4 bytes of values indicates the port ifindex.
It can contain as most as 512 link.rw OCTET STRING .1.3.6.1.4.1.2011.6.171.2.1.4 |
hwVectoringGroupRowStatusThis object is used to create a new row or delete an existing row
in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.171.2.1.5 |
hwVectoringGroupProtectionOfNotReqBandsDsThis object enable/disable the protection of vectoring
lines downstream.
Options:
1. enable(1)- The protection of vectoring lines downstream
is enabled
2. disable(2) - The protection of vectoring lines downstream
is disabledrw Enumeration .1.3.6.1.4.1.2011.6.171.2.1.6 |
hwVectoringGroupProtectionOfNotReqBandsUsThis object enable/disable the protection of vectoring
lines upstream.
Options:
1. enable(1)- The protection of vectoring lines upstream
is enabled
2. disable(2) - The protection of vectoring lines upstream
is disabledrw Enumeration .1.3.6.1.4.1.2011.6.171.2.1.7 |
hwVectoringConfProfTableThe table hwVectoringConfProfTable contains the vectoring profile
configuration.
A default profile with an index of 'DEFVAL' will always exist and
its parameters will be set to vendor-specific values, unless otherwise
specified in this document.
The index of this table is hwVectoringProfName. SEQUENCE OF HwVectoringConfProfEntry .1.3.6.1.4.1.2011.6.171.3 |
hwVectoringConfProfEntryThe table hwVectoringConfProfTable contains the vectoring profile
configuration.
A default profile with an index of 'DEFVAL' will always exist and
its parameters will be set to vendor-specific values, unless otherwise
specified in this document.
The index of this entry is hwVectoringProfName. HwVectoringConfProfEntry .1.3.6.1.4.1.2011.6.171.3.1 |
hwVectoringProfNameThis object identifies a row in this table. OCTET STRING .1.3.6.1.4.1.2011.6.171.3.1.1 |
hwVectoringEnableUsEnable/Disable FEXT cancellation control upstream.
Default values: enable.
Options:
1. enable(1) - Enable FEXT cancellation in the upstream direction from all the other vectoring lines into the line in the vectoring group
2. disable(2) - Disable FEXT cancellation in the upstream direction from all the other vectoring lines into the line in the vectoring group.rw Enumeration .1.3.6.1.4.1.2011.6.171.3.1.2 |
hwVectoringEnableDsEnable/Disable FEXT cancellation control downstream.
Default values: enable.
Options:
1. enable(1) - Enable FEXT cancellation in the downstream direction from all the other vectoring lines into the line in the vectoring group
2. disable(2) - Disable FEXT cancellation in the downstream direction from all the other vectoring lines into the line in the vectoring grouprw Enumeration .1.3.6.1.4.1.2011.6.171.3.1.3 |
hwVectoringProfRowStatusThis object is used to create a new row or delete an existing row
in this table. Before a profile can be deleted, it must be not
referenced from all VDSL ports.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.171.3.1.4 |
hwVectoringPortTableThe table hwVectoringPortTable contains port configuration about vectoring.
The index of this table is ifIndex. SEQUENCE OF HwVectoringPortEntry .1.3.6.1.4.1.2011.6.171.4 |
hwVectoringPortEntryThe table hwVectoringPortTable contains port configuration about vectoring.
The index of this entry is ifIndex. HwVectoringPortEntry .1.3.6.1.4.1.2011.6.171.4.1 |
hwVectoringLinkCfgProfThis object configures the vectoring link profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.171.4.1.1 |
hwVectoringLinkBelongedVceIdThe VCE ID uniquely identifies the VCE that manages and controls
the vectored group to which the line belongs. It consists of one
octet and valid ranges are from 1 to 96. The special value 0 means
the line is not in a vectored group.ro Unsigned32 .1.3.6.1.4.1.2011.6.171.4.1.2 |
hwVectoringLinkVcePortIndexThe VCE port index is the physical index that uniquely identifies
the VCE port to which the line is connected. It is an integer from
1 to the maximum number of lines supported by the VCE. The special
value 0 means the VCE port index is not validro Unsigned32 .1.3.6.1.4.1.2011.6.171.4.1.3 |
hwVectoringLinkBandPlanCompatibleOptions:
1. compatible(1) - The vectoring line configured band plan is compatible with the vectoring band configuration
2. incompatible(2) - The vectoring line configured band plan is not compatible with the vectoring band configurationro Enumeration .1.3.6.1.4.1.2011.6.171.4.1.4 |
hwVectoringLinkCPETypeOptions:
1. vectoring(1) - The CPE type is vectoring
2. fullFriendly(2) - The CPE type is vectoring full friendly
3. friendlyDs(3) - The CPE type is vectoring friendly ds
4. legacyVdsl2(4) - The CPE type is vdsl2
5. adsl(5) - The CPE type is adsl/2/2+
6. unknown(6) - The CPE type is unknownro Enumeration .1.3.6.1.4.1.2011.6.171.4.1.5 |
hwVectoringAutoGroupingTableThe table hwVectoringAutoGroupingTable contains the vectoring
auto group result.
The indexes of this table are hwVectoringGroupIndex and hwVectoringAutoGroupingGroupIndex. SEQUENCE OF HwVectoringAutoGroupingEntry .1.3.6.1.4.1.2011.6.171.5 |
hwVectoringAutoGroupingEntryThe table hwVectoringAutoGroupingTable contains the vectoring
auto group result.
The indexes of this entry are hwVectoringGroupIndex and hwVectoringAutoGroupingGroupIndex. HwVectoringAutoGroupingEntry .1.3.6.1.4.1.2011.6.171.5.1 |
hwVectoringAutoGroupingGroupIndexThis object identifies auto group index. Unsigned32 .1.3.6.1.4.1.2011.6.171.5.1.1 |
hwVectoringAutoGroupingGroupLinkListThis object defines the link list of the vectoring auto group.
This is a string of 4 bytes of values indicates the port ifindex.
It can contain as most as 512 link.ro OCTET STRING .1.3.6.1.4.1.2011.6.171.5.1.2 |
hwVectoringCrosstalkCouplingMatrixTableThe table hwVectoringCrosstalkCouplingMatrixTable contains information of vectoring
crosstalk coupling matrix about a port in a vectoring group.
The indexes of this table are ifIndex and hwVectoringCrosstalkCouplingMatrixDirection. SEQUENCE OF HwVectoringCrosstalkCouplingMatrixEntry .1.3.6.1.4.1.2011.6.171.6 |
hwVectoringCrosstalkCouplingMatrixEntryThe table hwVectoringCrosstalkCouplingMatrixTable contains information of vectoring
crosstalk coupling matrix about a port in a vectoring group.
The indexes of this entry are ifIndex and hwVectoringCrosstalkCouplingMatrixDirection. HwVectoringCrosstalkCouplingMatrixEntry .1.3.6.1.4.1.2011.6.171.6.1 |
hwVectoringCrosstalkCouplingMatrixDirectionThe direction of the vectoring crosstalk coupling matrix
either upstream or downstream. Vdsl2Direction (HUAWEI-VDSL2-LINE-TC-MIB) .1.3.6.1.4.1.2011.6.171.6.1.1 |
hwVectoringCrosstalkCoupingMatrixOperTypeThis object is used to start the vectoring crosstalk coupling matrix.
Options:
1. start(1) - start the vectoring crosstalk coupling matrix
2. stop(2) - stop the vectoring crosstalk coupling matrixrw Enumeration .1.3.6.1.4.1.2011.6.171.6.1.2 |
hwVectoringCrosstalkCoupingMatrixOperResultThis object identifies the crosstalk coupling matrix operation result.
Options:
1. normal(1) - The crosstalk coupling matrix operation result is normal.
2. fail(2) - The crosstalk coupling matrix operation result is fail.ro Enumeration .1.3.6.1.4.1.2011.6.171.6.1.3 |
hwVectoringCrosstalkCouplingMatrixPortIfindexListIfindex list of port that effect another port in the same vectoring group.
This is a string of 4 bytes of values indicates the port ifindex.ro OCTET STRING .1.3.6.1.4.1.2011.6.171.6.1.4 |
hwVectoringCrosstalkCouplingMatrixAverageMagnitudeListIn this matrix must be seen all vectoring subscribers with disturberline.
This is a string of 4 bytes of values indicates the port average magnitude.
The units is 0.1 dBm/Hz.ro OCTET STRING .1.3.6.1.4.1.2011.6.171.6.1.5 |
hwVectoringCrosstalkCouplingMatrixCancellationStatusListThis is a string of 1 bytes of values indicates the port crosstalk another.
The byte value indicates:
1. yes(1) - counteract
2. no(2) - not counteract
3. invalidValue(-1) - invalid valuero OCTET STRING .1.3.6.1.4.1.2011.6.171.6.1.6 |
hwVectoringBoardVectoringStateTableThe table hwVectoringBoardVectoringStateTable contains the vectoring current running information.
The indexes of this table are hwFrameIndex and hwSlotIndex. SEQUENCE OF HwVectoringBoardVectoringStateEntry .1.3.6.1.4.1.2011.6.171.7 |
hwVectoringBoardVectoringStateEntryThe table hwVectoringBoardVectoringStateTable contains the vectoring current running information.
The indexes of this entry are hwFrameIndex and hwSlotIndex. HwVectoringBoardVectoringStateEntry .1.3.6.1.4.1.2011.6.171.7.1 |
hwVectoringVpVectoringInterfaceStateThe object indicates VCE vectoring interface state.
Options:
1. down(1) - vectoring interface state is abnormal
2. up(2) - vectoring interface state is normal
3. invalidValue(-1) - invalid valuero Enumeration .1.3.6.1.4.1.2011.6.171.7.1.1 |
hwVectoringVdslVectoringInterfaceStateThe object indicates VDSL vectoring interface state.
Options:
1. down(1) - vectoring interface state is abnormal
2. up(2) - vectoring interface state is normal
3. invalidValue(-1) - invalid valuero Enumeration .1.3.6.1.4.1.2011.6.171.7.1.2 |
hwVectoringVdslVectoringSyncStateThe object indicates Sync state between VCE and VDSL vectoring interface.
Options:
1. noSync(1) - communication between VCE and VDSL is abnormal
2. sync(2) - communication between VCE and VDSL is normal
3. invalidValue(-1) - invalid valuero Enumeration .1.3.6.1.4.1.2011.6.171.7.1.3 |
hwVectoringTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.171.8 |
hwVectoringAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.171.8.1 |
hwVectoringAlarmTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.171.8.1.1 |
hwVectoringFaultAlarmTrapThis notification indicates that the vectoring service on the board fails. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.1 |
hwVectoringRecoveryAlarmTrapThis notification indicates that the vectoring service on the board recovers. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.2 |
hwVectoringVictCoefAbnormalVariationAlarmTrapThis notification indicates that the port receives abnormal crosstalk from
other ports. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.3 |
hwVectoringDistCoefAbnormalVariationAlarmTrapThis notification indicates that the port causes abnormal crosstalk to
other ports. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.4 |
hwVectoringReceivedESAbnormalAlarmTrapThis notification indicates that the port receives abnormal error sample
messages. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.5 |
hwvdsl2LegacyCpeActivatedAlarmTrapThis notification indicates that the port is activated in none-vectoring mode. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.6 |
hwvdsl2FrequentlyRetrainTimesReachThresholdAlarmTrapThis notification indicates that the port frequently retrain times in
15 minutes reach the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.7 |
hwVectoringReceivedESRecoverAlarmTrapThis notification indicates that the port error sample feedback recovers. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.8 |
hwVectoringPSConfigAbnormalAlarmTrapThis notification indicates that the port receives abnormal pilot Sequence
messages. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.9 |
hwVectoringPSConfigRecoverAlarmTrapThis notification indicates that the port pilot sequence recovers. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.1.1.10 |
hwVectoringCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.171.8.2 |
hwVectoringCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.171.8.2.1 |
hwVectoringGlobalConfigChangeTrapThis notification indicates that the vectoring global configuration is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.2.1.1 |
hwVectoringCrosstalkCoupingMatrixOperResultTrapThis notification indicates that the vectoring crosstalk coupling matrix calculation result. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.171.8.2.1.2 |
hwVectoringFastJoinConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.171.9 |
hwVectoringGainPhaseThis object is used to set the mode for obtaining the vectoring
gain during port activation. Default values:atInit.
Options:
1. atInit(1) - The vectoring gain is obtained during port
activation except board startup
2. trigger(2) - The vectoring gain is obtained in some condition
3. duringShowtime(3) - The port is activated and then the vectoring
gain is obtained during trackingrw Enumeration .1.3.6.1.4.1.2011.6.171.9.1 |
hwVectoringTriggerAfterBoardResetThe vectoring gain is not obtained during port activation
in board reset, but obtained during tracking in SRA.
Default values:enable.
Options:
1. enable(1) - Enables the vectoring gain achieved in showtime after board reset
2. disable(2) - Disables the vectoring gain achieved in showtime after board reset
3. invalidValue(-1) - invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.171.9.2 |
hwVectoringTriggerDuringBulkNumThe vectoring gain achieved in showtime when the number of ports
join in at a time exceeds the configured bulk init number. It
ranges from 2 to 256. The invalid value is 4294967295.
Default values:64.rw Unsigned32 .1.3.6.1.4.1.2011.6.171.9.3 |
hwVectoringJoinMaxWaitTimeThis object is used to set the total time for a joined port
to wait for other ports in the batch to join.
Default values:15.rw Unsigned32 .1.3.6.1.4.1.2011.6.171.9.4 |
hwVectoringJoinGapWaitTimeThis object is used to set the interval for a joined port to wait
for a single port in the batch to join.
Default values:5.rw Unsigned32 .1.3.6.1.4.1.2011.6.171.9.5 |
hwVectoringTrackingPeriodVectoring tracking period. Default values:30.rw Unsigned32 .1.3.6.1.4.1.2011.6.171.9.6 |
hwVectoringHistoryCoefficientThis object is used to set whether to use a historical coefficient.
Default values:both.
Options:
1. disable(1) - Indicates that a historical coefficient is not used
2. upstream(2) - Indicates that a historical coefficient is used in upstream direction
3. downstream(3) - Indicates that a historical coefficient is used in downstream direction
4. both(4) - Indicates that a historical coefficient is usedrw Enumeration .1.3.6.1.4.1.2011.6.171.9.7 |
hwVectoringTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.171.10 |
hwVectoringPortFrequentRetrainTimesThe times that Xdsl port frequent retrain in 15 minutes.ro Unsigned32 .1.3.6.1.4.1.2011.6.171.10.1 |