HUAWEI-RSTP-EXT-MIB
AI MIB Summary
The HUAWEI-RSTP-EXT-MIB module enables monitoring and management of Rapid Spanning Tree Protocol (RSTP) ring topology states and port roles on Huawei network devices to detect and prevent service disruptions caused by Layer 2 loops. It provides specific MIB objects for querying the operational status of user-side ring networks, facilitating automated verification of loop-free conditions and rapid convergence events.
The mib is used for defining the RSTP MIB object. RSTP is used to check the ring network on the user side to prevent the services from being affected. After that, the system checks the ring network on the user side automatically.
Main OID:
hwRstpExt.1.3.6.1.4.1.2011.5.21
53
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
hwRstpExtThe mib is used for defining the RSTP MIB object.
RSTP is used to check the ring network on the user side to prevent
the services from being affected.
After that, the system checks the ring network on the user side automatically. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.21 |
hwRstpMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.21.1 |
hwdot1dStpAdminStatusEnabling/Disabling Spanning Tree of the Switch
Options:
1. enabled(1)
2. disabled(2)
Default: disabled(2)rw EnabledStatus .1.3.6.1.4.1.2011.5.21.1.1 |
hwdot1dStpForceVersionConfiguring RSTP Operating Mode,
RSTP is compatible with STP. If a bridge running STP is in
this switched network, this can be used to set RSTP to work
in STP compatible mode or RSTP compatible mode. DEFVAL { 2 }
Options:
1. stp(0) -indicates the configuring RSTP operating mode is stp
2. rstp(2) -indicates the configuring RSTP operating mode is rstprw Enumeration .1.3.6.1.4.1.2011.5.21.1.2 |
hwdot1dStpDiameterConfiguring Diameter of the Switched Network,
Switched network is a loop-free tree structure in which any
two PCs are connected by a series of bridges.
Network diameter refers to the path with the most bridges.
It is denoted by the number of bridges on the path.rw Integer32 .1.3.6.1.4.1.2011.5.21.1.3 |
hwdot1dStpRootBridgeAddressMAC Address of the root bridge.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.21.1.4 |
hwdot1dStpPortXTableThis table describes rstp port expand table,
The index of this table is is not supported. SEQUENCE OF HwDot1dStpPortXEntry .1.3.6.1.4.1.2011.5.21.1.5 |
hwdot1dStpPortXEntryThis table describes rstp port expand table,
The index of this entry is is not supported. HwDot1dStpPortXEntry .1.3.6.1.4.1.2011.5.21.1.5.1 |
hwdot1dStpPortAdminStatusEnabling/Disabling Spanning Tree on the Port
The spanning tree can be disabled on specified Ethernet port
to forbid these ports participating in spanning tree calculation.rw EnabledStatus .1.3.6.1.4.1.2011.5.21.1.5.1.1 |
hwdot1dStpPortEdgeportConfiguring specified port to be EdgePort,
If the current Ethernet port is not connected with any
Ethernet port of other bridges, this port should be configured as
EdgePort to enable it to enter forwarding state directly without
the unnecessary transition.
If the specified port that is connected with the port of other bridges,
RSTP will automatically detect and reconfigure it as non-EdgePortrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.21.1.5.1.2 |
hwdot1dStpPortPointToPointConfiguring the Port to Connect Point-to-Point Link,
The two ports connected via the Point-to-Point link can
enter the forwarding state rapidly by transmitting synchronous packets,
so that unnecessary forwarding delay can be avoided.
If the configuration mode for this parameter is set to auto,
RSTP can automatically detect if the current Ethernet port is
connected with Point-to-Point link.
Options:
1. forceTrue(1) -indicates the configuration of the port to connect Point-to-Point link is forceTrue
2. forceFalse(2) -indicates the configuration of the port to connect Point-to-Point link is forceFalse
3. auto(3) -indicates the configuration of the port to connect Point-to-Point link is autorw Enumeration .1.3.6.1.4.1.2011.5.21.1.5.1.3 |
hwdot1dStpMcheckConfiguring mCheck of Specified Port,
By configuring mCheck, the user can check if there is the bridge
running STP in the network segment connected with the active Ethernet port.
If there is, the port will transfer to STP compatible mode.
In a stable network, though the bridge running STP has been removed,
this port will still work in STP compatible mode.
In this case, the port can be forced to RSTP mode by setting the variable mCheckrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.21.1.5.1.4 |
hwdot1dStpTransLimitConfiguring Maximum Transmission Speed of Specified Port,
The maximum transmission speed of Ethernet port is related
to its physical state and network structure.
The user can configure it according to the actual network situation.rw Integer32 .1.3.6.1.4.1.2011.5.21.1.5.1.5 |
hwdot1dSetStpDefaultPortCostcome back to default path cost of specified port,
The path cost of Ethernet port is related to its link speed.
The higher the link speed is, the lower the path cost should be configured.
When this parameter is set to the default value,
RSTP can automatically detect the link speed on the current Ethernet port
and transform it to corresponding path cost.
Options:
1. enable(1) -indicates default path cost of specified port is enabledrw Enumeration .1.3.6.1.4.1.2011.5.21.1.5.1.6 |
hwdot1dStpPortStatTableThis table describes rstp port statistic table,
The index of this table is not supported. SEQUENCE OF HwDot1dStpPortStatEntry .1.3.6.1.4.1.2011.5.21.1.6 |
hwdot1dStpPortStatEntryThis table describes rstp port statistic table,
The index of this entry is not supported. HwDot1dStpPortStatEntry .1.3.6.1.4.1.2011.5.21.1.6.1 |
hwdot1dStpRXStpBPDUNumber of STP BPDU Received.ro Counter32 .1.3.6.1.4.1.2011.5.21.1.6.1.1 |
hwdot1dStpTXStpBPDUNumber of STP BPDU Transmitted.ro Counter32 .1.3.6.1.4.1.2011.5.21.1.6.1.2 |
hwdot1dStpRXTCNBPDUNumber of TCN BPDU Received.ro Counter32 .1.3.6.1.4.1.2011.5.21.1.6.1.3 |
hwdot1dStpTXTCNBPDUNumber of TCN BPDU Transmitted.ro Counter32 .1.3.6.1.4.1.2011.5.21.1.6.1.4 |
hwdot1dStpRXRSTPBPDUNumber of RSTP BPDU Received.ro Counter32 .1.3.6.1.4.1.2011.5.21.1.6.1.5 |
hwdot1dStpTXRSTPBPDUNumber of RSTP BPDU Transmitted.ro Counter32 .1.3.6.1.4.1.2011.5.21.1.6.1.6 |
hwdot1dStpClearStatisticsTo clear statistics of Rapid Spanning Tree Protocol (RSTP for short).
Options:
1. clear(1) -indicates clearing statistics of Rapid Spanning Tree Protocolrw Enumeration .1.3.6.1.4.1.2011.5.21.1.6.1.7 |
hwRingCheckAdminStatusIndicates the status of the ring check on the user side.
Options:
1. enabled(1)
2. disabled(2)
Default: disabled(2)rw EnabledStatus .1.3.6.1.4.1.2011.5.21.1.7 |
hwBpduTunnelAdminStatusEnabling/Disabling BPDU tunneling function.
Options:
1. enabled(1)
2. disabled(2)
Default: disabled(2)rw EnabledStatus .1.3.6.1.4.1.2011.5.21.1.8 |
hwRingCheckModeStatusSet ring check mode.
Options:
1. private-bpdu(0) -indicates the ring check mode is private-bpdu
2. private-ethtype(1) -indicates the ring check mode is private-ethtype
Default: private-bpdu(0)rw Enumeration .1.3.6.1.4.1.2011.5.21.1.9 |
hwRingCheckPrivateEthtypeIndicates the private Ethernet protocol type of the user-side ring check packet.
Range: 1536-65535
Default: 33536rw Unsigned32 .1.3.6.1.4.1.2011.5.21.1.10 |
hwRingCheckResumeIntervalIndicates the interval time of re-activating the ring check port/ONT/CNU.
0 means to disable the function of automatically re-activating a port/ONT/CNU.
1-1440 indicates the waiting period for the port/ONT/CNU to be automatically
re-activated after it is automatically deactivated.
Unit: minute
Range: 0-1440
Default: 0rw Integer32 (0|1..1440) .1.3.6.1.4.1.2011.5.21.1.11 |
hwRingCheckRecordTableUsed to query the deactivation information of ring check,
The index of this table is hwRingCheckRecordIndex. SEQUENCE OF HwRingCheckRecordEntry .1.3.6.1.4.1.2011.5.21.1.12 |
hwRingCheckRecordEntryUsed to query the deactivation information of ring check,
The index of this entry is hwRingCheckRecordIndex. HwRingCheckRecordEntry .1.3.6.1.4.1.2011.5.21.1.12.1 |
hwRingCheckRecordIndexIndicates the index of a deactivation record. Unsigned32 .1.3.6.1.4.1.2011.5.21.1.12.1.1 |
hwRingCheckRecordFrameIndexIndicates the Frame ID of the port/ONT/CNU that is deactivated by ring check.ro Integer32 .1.3.6.1.4.1.2011.5.21.1.12.1.2 |
hwRingCheckRecordSlotIndexIndicates the Slot ID of the port/ONT/CNU that is deactivated by ring check.ro Integer32 .1.3.6.1.4.1.2011.5.21.1.12.1.3 |
hwRingCheckRecordPortIndexIndicates the Port ID of the port/ONT/CNU that is deactivated by ring check.ro Integer32 .1.3.6.1.4.1.2011.5.21.1.12.1.4 |
hwRingCheckRecordOntIndexIndicates the index of the ONT/CNU that is deactivated by ring check.ro Integer32 (-1|0..255) .1.3.6.1.4.1.2011.5.21.1.12.1.5 |
hwRingCheckRecordCountdownIndicates remaining waiting time for automatic activation.
-1 indicates that the automatic activation function of ring check is disabled.
Unit: minutero Integer32 (-1|0..1440) .1.3.6.1.4.1.2011.5.21.1.12.1.6 |
hwRingCheckTrapNotifyIndicates the trap notification mode of ring check on the user side.
Options:
1. event(1) -indicates the way of trap is event
2. alarm(2) -indicates the way of trap is alarm
Default: event(1)rw Enumeration .1.3.6.1.4.1.2011.5.21.1.13 |
hwRingCheckTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.21.2 |
hwRingCheckRemoteMACAddressIndicates the remote Remote mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.21.2.1 |
hwCnuIndexIndicates the CNU ID.ro Integer32 .1.3.6.1.4.1.2011.5.21.2.2 |
hwRingCheckTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.21.3 |
hwRingCheckAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.21.3.1 |
hwRingCheckAlarmTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.21.3.1.0 |
hwRingCheckPortRingTrapThe SNMP trap is generated when the ring topology in the subscriber port is found. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.21.3.1.0.1 |
hwRingCheckXponPortRingTrapThe SNMP trap is generated when the ring topology in the subscriber xPON port is found. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.21.3.1.0.2 |
hwRingCheckEocPortRingTrapThe SNMP trap is generated when the ring topology in the subscriber EoC port is found. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.21.3.1.0.3 |
hwRingCheckAlarmWarningTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.21.3.1.1 |
hwRingCheckPortRingWarningTrapThe SNMP trap is generated when the ring topology in the subscriber port is found. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.21.3.1.1.1 |
hwRingCheckXponPortRingWarningTrapThe SNMP trap is generated when the ring topology in the subscriber xPON port is found. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.21.3.1.1.2 |
hwRingCheckEocPortRingWarningTrapThe SNMP trap is generated when the ring topology in the subscriber EoC port is found. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.21.3.1.1.3 |
hwRingCheckPortRingClearedTrapThe SNMP trap is generated when the ring topology in the subscriber port is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.21.3.1.1.4 |
hwRingCheckXponPortRingClearedTrapThe SNMP trap is generated when the ring topology in the subscriber xPON port is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.21.3.1.1.5 |
hwRingCheckEocPortRingClearedTrapThe SNMP trap is generated when the ring topology in the subscriber EoC port is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.21.3.1.1.6 |