G6-POE-MIB
AI MIB Summary
The G6-POE-MIB enables SNMP-based monitoring and management of Power over Ethernet (PoE) status, power allocation, and port-level electrical parameters on Microsens Generation 6 Ethernet switches. This private MIB specifically tracks PoE power consumption, voltage levels, and fault conditions to ensure reliable power delivery to connected endpoints.
Microsens private MIB for Generation 6 Ethernet Switches
Main OID:
device.1.3.6.1.4.1.3181.10.6.1
44
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
deviceMicrosens private MIB for Generation 6 Ethernet Switches MODULE-IDENTITY .1.3.6.1.4.1.3181.10.6.1 |
poe OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.6.1.33 |
poePoeMaxPowerAvailableDefines the total power that this units power supply can support. This value is used to balance the PoE output power delivered. Please adjust according to connected power supply rating.rw Integer32 .1.3.6.1.4.1.3181.10.6.1.33.1 |
poeRestartPoePortThis function may be used to briefly drop the power on a PoE port in order to reboot the attached device. Please supply port number as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: poe.restart_poe_port = 1/2,1/5 or poe.restart_poe_port = 1-3 or equivalent poe.restart_poe_port = 1/1-1/3.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.33.2 |
poeRestartEnergyPortThis function may be used to restart measurement of energy consumption per port. Please supply port number as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: poe.restart_energy_port = 1/2,1/5 or poe.restart_energy_port = 1-3 or equivalent poe.restart_energy_port = 1/1-1/3.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.33.3 |
configTablePower over Ethernet function permits the powering of connected units which do not use their own local power supply. SEQUENCE OF ConfigEntry .1.3.6.1.4.1.3181.10.6.1.33.4 |
configEntry ConfigEntry .1.3.6.1.4.1.3181.10.6.1.33.4.1 |
configPortIndexAutomatically generated INTEGER .1.3.6.1.4.1.3181.10.6.1.33.4.1.1 |
configModeUsed to enable or disable PoE function.rw Enumeration .1.3.6.1.4.1.3181.10.6.1.33.4.1.2 |
configPriorityPortPorts without priority may be switched off under a power contention situation.rw Enumeration .1.3.6.1.4.1.3181.10.6.1.33.4.1.3 |
configEnablePoePlusAllow between 15-30W power consumption.rw Enumeration .1.3.6.1.4.1.3181.10.6.1.33.4.1.4 |
watchdogTable SEQUENCE OF WatchdogEntry .1.3.6.1.4.1.3181.10.6.1.33.5 |
watchdogEntry WatchdogEntry .1.3.6.1.4.1.3181.10.6.1.33.5.1 |
watchdogPortIndexAutomatically generated INTEGER .1.3.6.1.4.1.3181.10.6.1.33.5.1.1 |
watchdogTestMethodSelects the method with which the attached device is probed. Turn unused to ports, which should not affect PoE, to DISABLE.rw Enumeration .1.3.6.1.4.1.3181.10.6.1.33.5.1.2 |
watchdogStartDelayDefines the time in seconds after PoE enable to the first check. This is useful when the device has a long boot time and a short check period is used. Effectively this delays the first check.rw Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.5.1.3 |
watchdogCheckIntervalDefines the time in seconds between successive checks. If set to 0 only manual checks via the test_now command are executed.rw Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.5.1.4 |
watchdogRecheckIntervalDefines the time in seconds between successive checks while an error has occured. This parameter permits a long check interval combined with faster checking while an error is suspected.rw Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.5.1.5 |
watchdogTolerableFailuresDefines the number of tolerable successive errors before reboot action is taken by toggling PoE.rw Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.5.1.6 |
watchdogMinimumRmonPacketsDefines the number of packets that must be received within check interval. Applies to RMON test method only.rw Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.5.1.7 |
watchdogCheckedAddressDefines the IP v4 or v6 address of the checked device. Also accepts hostname. Applies to PING method only.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.33.5.1.8 |
watchdogClearStatisticsResets statistics counter for this port to 0.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.33.5.1.9 |
poeTotalPowerConsumedThe sum of power currently delivered to all ports. (units: mW)ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.100 |
statusTableThis table list the current PoE port conditions. SEQUENCE OF StatusEntry .1.3.6.1.4.1.3181.10.6.1.33.101 |
statusEntry StatusEntry .1.3.6.1.4.1.3181.10.6.1.33.101.1 |
statusPortIndexAutomatically generated INTEGER .1.3.6.1.4.1.3181.10.6.1.33.101.1.1 |
statusConditionPoE status and conditions.ro Enumeration .1.3.6.1.4.1.3181.10.6.1.33.101.1.2 |
statusDeterminedClassDetermined and negotiated PoE class.ro Enumeration .1.3.6.1.4.1.3181.10.6.1.33.101.1.3 |
statusOutputCurrentCurrent delivered to the attached device. (units: mA)ro Integer32 .1.3.6.1.4.1.3181.10.6.1.33.101.1.4 |
statusOutputVoltageVoltage delivered to the attached device. (units: mV)ro Integer32 .1.3.6.1.4.1.3181.10.6.1.33.101.1.5 |
statusOutputPowerCalculated power delivered to the attached device. (units: mW)ro Integer32 .1.3.6.1.4.1.3181.10.6.1.33.101.1.6 |
statusPowerDeniedCounterIncremented whenever a PoE request was denied regardless of reason.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.101.1.7 |
statusOverCurrentCounterIncremented whenever an over_current condition was detected.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.101.1.8 |
statusShortCircuitCounterIncremented whenever a short circuit was detected.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.101.1.9 |
statusNumberOfChecksCounts the number of watchdog checks.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.101.1.10 |
statusNumberOfFailuresCounts the number of failed wachdog checks.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.101.1.11 |
statusPoeRestartCounterCounts the number of times PoE was toggled by watchdog to reboot the attached device.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.101.1.12 |
energySuppliedTableThis table list the power provided via PoE ports. The values are automatically updated in the given interval. SEQUENCE OF EnergySuppliedEntry .1.3.6.1.4.1.3181.10.6.1.33.102 |
energySuppliedEntry EnergySuppliedEntry .1.3.6.1.4.1.3181.10.6.1.33.102.1 |
energySuppliedPortIndexAutomatically generated INTEGER .1.3.6.1.4.1.3181.10.6.1.33.102.1.1 |
energySuppliedTimeOfValueRestartTime stamp when the statistics counter had been restarted.ro Counter32 .1.3.6.1.4.1.3181.10.6.1.33.102.1.2 |
energySuppliedTimeSinceValueRestartHow long ago have the statistics counter been restarted.ro Counter32 .1.3.6.1.4.1.3181.10.6.1.33.102.1.3 |
energySuppliedLastSecondEnergy supplied in the last second. Value in Joule.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.102.1.4 |
energySuppliedAccumulatedEnergy supplied since last value reset. Value in Wh. (1Wh = 3600 Joule = 3600Ws).ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.33.102.1.5 |