G6-RING-MIB
AI MIB Summary
The G6-RING-MIB facilitates the monitoring and management of Generation 6 Microsens Ethernet switches, specifically enabling the tracking of ring topology status, port states, and redundancy protocol events to ensure network resilience.
Microsens private MIB for Generation 6 Ethernet Switches
Main OID:
protocol.1.3.6.1.4.1.3181.10.6.2
87
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
87 total| Object Name |
|---|
protocolMicrosens private MIB for Generation 6 Ethernet Switches MODULE-IDENTITY .1.3.6.1.4.1.3181.10.6.2 |
ring OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.6.2.45 |
configTableThis section is used to configure the MICROSENS ring protocol which provides fast network redundancy. SEQUENCE OF ConfigEntry .1.3.6.1.4.1.3181.10.6.2.45.1 |
configEntry ConfigEntry .1.3.6.1.4.1.3181.10.6.2.45.1.1 |
configIndexAutomatically generated INTEGER .1.3.6.1.4.1.3181.10.6.2.45.1.1.1 |
configNameUser defined ring name is purely informational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.2.45.1.1.2 |
configEnableRingUsed to enable the redundant ring function.rw Enumeration .1.3.6.1.4.1.3181.10.6.2.45.1.1.3 |
configRingMasterWhen enabled this unit is designated as ring master. There can only be one master in a ring.rw Enumeration .1.3.6.1.4.1.3181.10.6.2.45.1.1.4 |
configNumberRing number must be set identical for each member of a ring. When left unassigned the default setting 1 for index 1 and 2 for index 2 and so on is used.rw Integer32 .1.3.6.1.4.1.3181.10.6.2.45.1.1.5 |
configPortAPort number for ring side Arw Integer32 .1.3.6.1.4.1.3181.10.6.2.45.1.1.6 |
configPortBPort number for ring side B. Ring master blocks port B when ring is ok.rw Integer32 .1.3.6.1.4.1.3181.10.6.2.45.1.1.7 |
configFailureDetectionFor normal ring applications set detection to BOTH_PORTS. Other settings are required when two rings are coupled with 2 parallel links for redundant inter-ring traffic. In this case not all links should be monitored in order to avoid a possible loop condition. Careful planning is advised.rw Enumeration .1.3.6.1.4.1.3181.10.6.2.45.1.1.8 |
mrpConfigTableThis section is used to configure the MRP ring protocol. SEQUENCE OF MrpConfigEntry .1.3.6.1.4.1.3181.10.6.2.45.2 |
mrpConfigEntry MrpConfigEntry .1.3.6.1.4.1.3181.10.6.2.45.2.1 |
mrpConfigIndexAutomatically generated INTEGER (0) .1.3.6.1.4.1.3181.10.6.2.45.2.1.1 |
mrpConfigEnableMrpUsed to enable the MRP ring function. Only enable when all MRP and VLAN settings have been set. Only close cable connections of the ring when all nodes have been enabled.rw Enumeration .1.3.6.1.4.1.3181.10.6.2.45.2.1.2 |
mrpConfigDomainNameUser defined ring name is purely informational. When specified, the name will be inserted in all MRP related events. When left blank, the UUID of the MRP ring is inserted instead.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.2.45.2.1.3 |
mrpConfigExpectedRoleDetermines role of this node in the ring. Configure only one master per ring.rw Enumeration .1.3.6.1.4.1.3181.10.6.2.45.2.1.4 |
mrpConfigReactOnLinkChangeWhen enabled the manager reacts to link change messages from a client. Disable this feature only when any member of the ring does not support react on link change feature. Also known as Advanced Mode. Only applies to manager role.rw Enumeration .1.3.6.1.4.1.3181.10.6.2.45.2.1.5 |
mrpConfigRecoveryTimeSpecifies the guaranteed maximum recovery time (i.e. Time from the fault event to the time when the network regains its required communication function). Only applies to manager role.rw Enumeration .1.3.6.1.4.1.3181.10.6.2.45.2.1.6 |
mrpConfigPort1Port number for ring side 1rw Integer32 .1.3.6.1.4.1.3181.10.6.2.45.2.1.7 |
mrpConfigPort2Port number for ring side 2. Ring master blocks B when ring is okrw Integer32 .1.3.6.1.4.1.3181.10.6.2.45.2.1.8 |
mrpConfigVlanIdWhen using a VLAN ensure that the rings ports are configured as member of the VLAN in the vlan settings. Leave this field blank or set to 0 when no VLAN is used.rw Integer32 .1.3.6.1.4.1.3181.10.6.2.45.2.1.9 |
mrpConfigResetRoundTripDelaysWhen executed the min_round_trip_delay and max_round_trip_delay values are reset to 0. This has no service implications.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.2.45.2.1.10 |
mrpConfigResetStatisticsWhen executed statistics related to this MRP ring are cleared. This has no service implications.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.2.45.2.1.11 |
statusTableStatus values display the current condition of the ring network. SEQUENCE OF StatusEntry .1.3.6.1.4.1.3181.10.6.2.45.100 |
statusEntry StatusEntry .1.3.6.1.4.1.3181.10.6.2.45.100.1 |
statusIndexAutomatically generated INTEGER .1.3.6.1.4.1.3181.10.6.2.45.100.1.1 |
statusStatero Enumeration .1.3.6.1.4.1.3181.10.6.2.45.100.1.2 |
statusLastStateChangeTime and date string indication when the state of the ring protocol has last changed to the state now indicated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.2.45.100.1.3 |
statusRingInterruptThis indicates that at least one of the two ring ports is blocked. It is an OR of the port_a and port_b interrupt status fields. Note that the name may be misleading. Interrupted is to be understood as the port being actively blocked by the protocol to interrupt the traffic to prevent a network loop. This is part of normal operation.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.100.1.4 |
statusGlobalRingAlarmThis indicates that somewhere in the overall ring a failure exists. It does not neccessarily indicate loss of data. Observe the overall state to determine this.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.100.1.5 |
statusErrorDetectedApplies to the ring master. Indicates that the master has detected an error on one of the ports.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.100.1.6 |
statusRingPortAInterruptedIndicates that ring port_a is blocked. See parameter ring_interrupt for details.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.100.1.7 |
statusRingPortBInterruptedIndicates that ring port_a is blocked. See parameter ring_interrupt for details.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.100.1.8 |
statusRingPortANeighborThis field indicates problems associated with the device connect to ring port_a. The issue may be located in the connected device, not locally!ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.100.1.9 |
statusRingPortBNeighborThis field indicates problems associated with the device connect to ring port_b. The issue may be located in the connected device, not locally!ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.100.1.10 |
statisticsTableStatistics of the ring network performance. SEQUENCE OF StatisticsEntry .1.3.6.1.4.1.3181.10.6.2.45.101 |
statisticsEntry StatisticsEntry .1.3.6.1.4.1.3181.10.6.2.45.101.1 |
statisticsIndexAutomatically generated INTEGER .1.3.6.1.4.1.3181.10.6.2.45.101.1.1 |
statisticsNumberOfBackupsCounts the number of backups engaged since the last power up.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.2.45.101.1.2 |
statisticsCurrentBackupDurationIndicates since how long a currently active backup is established. When no backup is active a 0 is displayed.ro Counter32 .1.3.6.1.4.1.3181.10.6.2.45.101.1.3 |
statisticsLastBackupDurationIndicates since how long the last backup was established. Indicates 0 if there was no backup since last reboot.ro Counter32 .1.3.6.1.4.1.3181.10.6.2.45.101.1.4 |
statisticsTotalBackupDurationTotal time the ring was in backup since last reboot.ro Counter32 .1.3.6.1.4.1.3181.10.6.2.45.101.1.5 |
couplingStatusTableIndicates status of ring coupling function. SEQUENCE OF CouplingStatusEntry .1.3.6.1.4.1.3181.10.6.2.45.102 |
couplingStatusEntry CouplingStatusEntry .1.3.6.1.4.1.3181.10.6.2.45.102.1 |
couplingStatusIndexAutomatically generated INTEGER (0) .1.3.6.1.4.1.3181.10.6.2.45.102.1.1 |
couplingStatusControllerStateData transmission state.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.102.1.2 |
couplingStatusCportLinkCoupling port is in linkup condition.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.102.1.3 |
couplingStatusCportForwardCoupling port is in forwarding state.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.102.1.4 |
couplingStatusCportTimeoutIndicates that no ring coupling frames were received within defined period.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.102.1.5 |
couplingStatusConnectionValidIndicates that source ip address of received frame matches configured partner ip.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.102.1.6 |
couplingStatusValidPartnerIpIndicates that received ring number matches expected locally configured ring number.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.102.1.7 |
couplingStatusValidPartnerIdro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.102.1.8 |
mrpStatusTableStatus common to manager and client SEQUENCE OF MrpStatusEntry .1.3.6.1.4.1.3181.10.6.2.45.103 |
mrpStatusEntry MrpStatusEntry .1.3.6.1.4.1.3181.10.6.2.45.103.1 |
mrpStatusIndexAutomatically generated INTEGER (0) .1.3.6.1.4.1.3181.10.6.2.45.103.1.1 |
mrpStatusOperationIndicates if MRP function is enabled.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.103.1.2 |
mrpStatusAdminRoleMirrors expected role configuration.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.103.1.3 |
mrpStatusOperationalRolereal_role ??ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.103.1.4 |
mrpStatusPort1Statero Enumeration .1.3.6.1.4.1.3181.10.6.2.45.103.1.5 |
mrpStatusPort2Statero Enumeration .1.3.6.1.4.1.3181.10.6.2.45.103.1.6 |
mrpStatusDomainIdWhen left blank the default id of all bits 1 is used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.2.45.103.1.7 |
mrpStatusDomainErrorro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.103.1.8 |
mrpManagerStatusTableStatus that applies to manager only. Invalid when in client mode. SEQUENCE OF MrpManagerStatusEntry .1.3.6.1.4.1.3181.10.6.2.45.104 |
mrpManagerStatusEntry MrpManagerStatusEntry .1.3.6.1.4.1.3181.10.6.2.45.104.1 |
mrpManagerStatusIndexAutomatically generated INTEGER (0) .1.3.6.1.4.1.3181.10.6.2.45.104.1.1 |
mrpManagerStatusRingStateIndicates of MRP is enabled on this device.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.104.1.2 |
mrpManagerStatusManagerPriorityThe priority of this MRP entity.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.3 |
mrpManagerStatusRingOpenCountCounts how many times was the ring broken.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.4 |
mrpManagerStatusTimeSinceLastRingOpenSeconds since the ring was last opened.ro Counter32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.5 |
mrpManagerStatusMaxRoundTripDelayThe longest round trip delay that was measured since value reset. Value in microsecondsro Unsigned32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.6 |
mrpManagerStatusMinRoundTripDelayThe shortest round trip delay that was measured since value reset. Value in microsecondsro Unsigned32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.7 |
mrpManagerStatusTopologyChangeIntervalInterval for sending of MRP_TopologyChange messagesro Integer32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.8 |
mrpManagerStatusTopoChangeRepeatCountTopology change repeat count for repeated transmission of MRP_TopologyChange messagesro Integer32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.9 |
mrpManagerStatusShortTestIntervalShort interval for sending of MRP_Test messages after link changes on the ringro Integer32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.10 |
mrpManagerStatusDefaultTestIntervalDefault interval for sending of MRP_Test messages on the ringro Integer32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.11 |
mrpManagerStatusTestMonitorCountCount for monitoring the reception of MRP_Test messagesro Integer32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.12 |
mrpManagerStatusTestMonitorExtCountThe extended interval count for monitoring the reception of MRP_Test messagesro Integer32 .1.3.6.1.4.1.3181.10.6.2.45.104.1.13 |
mrpManagerStatusNonblockingSupportFalse indicates that the manager requires ring clients that support port blocking. This is standard behavior of any modern switch.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.104.1.14 |
mrpClientStatusTableStatus that applies to client only. Invalid when in manager mode. SEQUENCE OF MrpClientStatusEntry .1.3.6.1.4.1.3181.10.6.2.45.105 |
mrpClientStatusEntry MrpClientStatusEntry .1.3.6.1.4.1.3181.10.6.2.45.105.1 |
mrpClientStatusIndexAutomatically generated INTEGER (0) .1.3.6.1.4.1.3181.10.6.2.45.105.1.1 |
mrpClientStatusLinkDownTimerThe interval for sending of MRP_linkDown messagesro Integer32 .1.3.6.1.4.1.3181.10.6.2.45.105.1.2 |
mrpClientStatusLinkUpTimerThe interval for sending of MRP_linkUp messagesro Integer32 .1.3.6.1.4.1.3181.10.6.2.45.105.1.3 |
mrpClientStatusLinkChangeCountThe count for repeated transmission of MRP_LinkChange messagesro Integer32 .1.3.6.1.4.1.3181.10.6.2.45.105.1.4 |
mrpClientStatusBlockedSupportTrue indicates that this client supports port blocking. The value is always true.ro Enumeration .1.3.6.1.4.1.3181.10.6.2.45.105.1.5 |