MS-SWITCH30-MIB
AI MIB Summary
The MS-SWITCH30-MIB module provides SNMP-based management capabilities for Microsoft Switch 30 series hardware, enabling the monitoring of interface status, port statistics, and device operational parameters.
MIB module for manages Switches
Main OID:
mib3.1.3.6.1.4.1.3181.10.3
453
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
453 total| Object Name |
|---|
microsens OBJECT IDENTIFIER .1.3.6.1.4.1.3181 |
managedSwitches OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10 |
mib3MIB module for manages Switches MODULE-IDENTITY .1.3.6.1.4.1.3181.10.3 |
device OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.1 |
deviceArtNoThis entry describes the article number
of the device.ro DisplayString .1.3.6.1.4.1.3181.10.3.1.1 |
deviceSerNoThis entry describes the serial number
of the device.ro DisplayString .1.3.6.1.4.1.3181.10.3.1.2 |
deviceHardwareThis entry contains the hardware version
of the device.ro DisplayString .1.3.6.1.4.1.3181.10.3.1.3 |
deviceDescriptionThis entry contains a description of
the device.ro DisplayString .1.3.6.1.4.1.3181.10.3.1.4 |
deviceNameThis entry contains a description of
the device.rw DisplayString .1.3.6.1.4.1.3181.10.3.1.5 |
deviceLocationThis entry contains the location of
the device.rw DisplayString .1.3.6.1.4.1.3181.10.3.1.6 |
deviceContactThis entry contains a contact regarding
the device.rw DisplayString .1.3.6.1.4.1.3181.10.3.1.7 |
deviceGroupThis entry defines the name of the group
the device belongs to.rw DisplayString .1.3.6.1.4.1.3181.10.3.1.8 |
deviceTemperatureThis is the current temperature of the
device in degree celsius. A value of
255 has to be interpreted as 'unsupported'.ro INTEGER .1.3.6.1.4.1.3181.10.3.1.9 |
deviceTemperatureLevelThis is the current temperature level
of the device.ro Enumeration .1.3.6.1.4.1.3181.10.3.1.10 |
deviceUpTimeTime since the device was last
re-initialized (in 0.01s).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3181.10.3.1.11 |
deviceFddActiveTimeActive Time interval for Fibre-
Down-Detection Feature (in 0.01s).
valid range: [10 .. 100000]
A value of '0' means 'unsupported'rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3181.10.3.1.12 |
deviceFddPassiveTimePassive Time interval for Fibre-
Down-Detection Feature (in 0.01s).
valid range: [10 .. 100000]
A value of '0' means 'unsupported'rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3181.10.3.1.13 |
deviceInventoryThis entry contains an inventory
string for the device.rw DisplayString .1.3.6.1.4.1.3181.10.3.1.14 |
agent OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.2 |
agentFirmwareThis entry contains the firmware version
of the agent.ro DisplayString .1.3.6.1.4.1.3181.10.3.2.1 |
agentMacAddressThis entry contains the mac address of
the agent.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.2.2 |
agentIpModeThis entry describes the IP-mode of
the agent.rw Enumeration .1.3.6.1.4.1.3181.10.3.2.3 |
agentIpAddressThis entry contains the IP-address of
the agent.rw IpAddress .1.3.6.1.4.1.3181.10.3.2.4 |
agentSubnetMaskThis entry contains the subnet mask of
the agent.rw IpAddress .1.3.6.1.4.1.3181.10.3.2.5 |
agentGatewayThis entry contains the gateway ip address
for the agent.rw IpAddress .1.3.6.1.4.1.3181.10.3.2.6 |
agentConfigResetSet this entry to '1' to reset the device.
This entry is self clearing.rw Enumeration .1.3.6.1.4.1.3181.10.3.2.7 |
agentConfigFactoryDefaultSet this entry to '1' before setting the
entry 'agentConfigReset' to '1' sets the
device to factory defaults once and the
entry is self cleared. Setting this entry
to '2' it will remain as set and every
standard reset will be a factory reset.
If 'Permanent Factory Reset' is not
supported then the 'Temporary Factory
Reset' will be set instead.rw Enumeration .1.3.6.1.4.1.3181.10.3.2.8 |
agentConfigEnableFactoryButtonSetting this entry to a '1' enables
the hardware button for a factory
reset if available.rw Enumeration .1.3.6.1.4.1.3181.10.3.2.9 |
agentSecureAddressFlagThis Entry documents the Flag which is
set from the system if invalid values
for MAC-address, IP-address or subnet mask
have been found in the stored configuration.
In this case hard coded secure values are
used instead of those found. This flag
is cleared if valid valued are found when
the system comes up.ro Enumeration .1.3.6.1.4.1.3181.10.3.2.10 |
agentStorageMediaCardStatusThis Entry represents the detected status
of a storage memory card if supported.ro Enumeration .1.3.6.1.4.1.3181.10.3.2.11 |
agentStorageMediaCardBootSet this entry to '1' before setting the
entry 'agentConfigReset' to '1' sets the
device's config to the values stored on
the Storage Media Card once if available .
and the entry is self cleared.
Setting this entry to '2' it will remain
as set and every boot event will use the
configuration from the card.
If not supported a value of 255 will be
returned.rw Enumeration .1.3.6.1.4.1.3181.10.3.2.12 |
agentStorageMediaCardMacSet this entry to '1' before setting the
entry 'agentConfigReset' to '1' leads to
take the MAC address from the SMC. Be very
careful with this service option to avoid
duplicated MAC addresses.!rw Enumeration .1.3.6.1.4.1.3181.10.3.2.13 |
agentStoreConfigToStorageMediaCardSet this entry to '1' to store the
present configuration to the storage
media card if available.
This entry is self clearing.rw Enumeration .1.3.6.1.4.1.3181.10.3.2.14 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.3 |
portCountThe number of ports resent on this system.ro INTEGER .1.3.6.1.4.1.3181.10.3.3.1 |
portStatusTableThis table contains port status information
of the device. SEQUENCE OF PortStatusList .1.3.6.1.4.1.3181.10.3.3.10 |
portStatusTableEntryEntry in the port status table. PortStatusList .1.3.6.1.4.1.3181.10.3.3.10.1 |
portStatusIdThis entry describes the port id.ro INTEGER .1.3.6.1.4.1.3181.10.3.3.10.1.1 |
portStatusTypeThis entry describes the type of the port.ro Enumeration .1.3.6.1.4.1.3181.10.3.3.10.1.2 |
portStatusLinkThis entry describes the link status of
the port.ro Enumeration .1.3.6.1.4.1.3181.10.3.3.10.1.3 |
portStatusSpeedThis entry describes the current speed
status of the port if available.ro Enumeration .1.3.6.1.4.1.3181.10.3.3.10.1.4 |
portStatusDuplexThis entry describes the current duplex
status of the port if available.ro Enumeration .1.3.6.1.4.1.3181.10.3.3.10.1.5 |
portStatusFlowControlThis entry describes the current flow
control status of the port if available.
This state referres the current duplex mode.ro Enumeration .1.3.6.1.4.1.3181.10.3.3.10.1.6 |
portStatusPinoutThis entry describes the current pinout
status of the port if available.ro Enumeration .1.3.6.1.4.1.3181.10.3.3.10.1.7 |
portStatusFarEndFaultThis entry describes the current
Far End Fault Detection status of
the port if available.ro Enumeration .1.3.6.1.4.1.3181.10.3.3.10.1.8 |
portStatusRxNetloadThis entry describes the receiver netload
in percent, adapted to the selected port
speed. Netload values greater than '0' but
less that '1' are rounded up to a '1' to
differentiate them from real zero-values.
If netload measuring is not supported,
then a value of '-1' is given back.ro INTEGER (-1..100) .1.3.6.1.4.1.3181.10.3.3.10.1.9 |
portStatusTxNetloadThis entry describes the transmitter netload
in percent, adapted to the selected port
speed. Netload values greater than '0' but
less that '1' are rounded up to a '1' to
differentiate them from real zero-values.
If netload measuring is not supported,
then a value of '-1' is given back.ro INTEGER (-1..100) .1.3.6.1.4.1.3181.10.3.3.10.1.10 |
portConfigTableThis table contains the port configuration
of the device. SEQUENCE OF PortConfigList .1.3.6.1.4.1.3181.10.3.3.20 |
portConfigTableEntryEntry in the port configuration table. PortConfigList .1.3.6.1.4.1.3181.10.3.3.20.1 |
portConfigIdThis entry describes the device's port id.ro INTEGER .1.3.6.1.4.1.3181.10.3.3.20.1.1 |
portConfigAliasThis entry contains an individual name
for the port.rw DisplayString .1.3.6.1.4.1.3181.10.3.3.20.1.2 |
portConfigEnableThis entry describes the type of the port.rw Enumeration .1.3.6.1.4.1.3181.10.3.3.20.1.3 |
portConfigAutonegoThis entry describes the current
autonegotiation configuration of
the port if available.rw Enumeration .1.3.6.1.4.1.3181.10.3.3.20.1.4 |
portConfigSpeedThis entry describes the current speed
configuration of the port if available.
This entry is only valid if Autonegotiation
is disabled.rw Enumeration .1.3.6.1.4.1.3181.10.3.3.20.1.5 |
portConfigDuplexThis entry describes the current duplex
configuration of the port if available.
This entry is only valid if Autonegotiation
is disabled.rw Enumeration .1.3.6.1.4.1.3181.10.3.3.20.1.6 |
portConfigFlowControlThis entry describes the current flow
control configuration of the port if
available. The current duplex mode is
is used to to select the matching settings.
This entry is used for advertising if
Autonegotiation is enabled and for forcing
if AN is disabled.rw Enumeration .1.3.6.1.4.1.3181.10.3.3.20.1.7 |
portConfigPinoutThis entry describes the current pinout
configuration of a copper port if available.rw Enumeration .1.3.6.1.4.1.3181.10.3.3.20.1.8 |
portConfigFarEndFaultThis entry describes the current far end
fault behaviour of a fiber port if
available.rw Enumeration .1.3.6.1.4.1.3181.10.3.3.20.1.9 |
portConfigAdvertiseThis entry describes the autonegotiation
advertise information of the port.rw Enumeration .1.3.6.1.4.1.3181.10.3.3.20.1.10 |
portConfigFibreDownDetectionThis entry describes the current fibre
down detection behaviour of a fiber port
if available.rw Enumeration .1.3.6.1.4.1.3181.10.3.3.20.1.11 |
vlan OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.4 |
vlanSupportThis entry contains the information if
vlans are supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.4.1 |
vlanEnableThis entry enables or disables vlan filtering.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.2 |
vlanForceDefaultVIDThis entry enables or disables forcing
default vlan id.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.3 |
vlanFilterCountThis entry describes the number of
supported vlan filters.ro INTEGER .1.3.6.1.4.1.3181.10.3.4.4 |
vlanVoiceVIDThis entry describes the default VID for Voice
over IP operation. This VID is communicated
via CDP and LLDP.rw INTEGER .1.3.6.1.4.1.3181.10.3.4.5 |
vlanRstpVIDThis entry describes the VID for RSTP operation.rw INTEGER .1.3.6.1.4.1.3181.10.3.4.6 |
vlanUnauthVIDThis entry describes the VID used for unauthorized
ports if The corresponding mode of operation has
been selected.rw INTEGER .1.3.6.1.4.1.3181.10.3.4.7 |
vlanPortTableThis table contains the vlan port
configuration. SEQUENCE OF VlanPortList .1.3.6.1.4.1.3181.10.3.4.10 |
vlanPortTableEntryEntry in the vlan port configuration
table. VlanPortList .1.3.6.1.4.1.3181.10.3.4.10.1 |
vlanPortIdThis entry describes the port id for the
vlan port table. The port id '0' is used
for the internal management agent port.ro INTEGER .1.3.6.1.4.1.3181.10.3.4.10.1.1 |
vlanPortModeThis entry describes the vlan mode the port.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.10.1.2 |
vlanDefaultVIDThis entry describes default vid for the port.rw INTEGER .1.3.6.1.4.1.3181.10.3.4.10.1.3 |
vlanDefaultPriorityThis entry describes default priority tag
for the port.rw INTEGER .1.3.6.1.4.1.3181.10.3.4.10.1.4 |
vlanPortFlagsThis Entry contains per port some bitwise
filter settings:
Bit 0: Force Port Default VID (only valid if
vlanForceDefaultVID is set to '3')
Bit 1: per VID Priority Overriderw INTEGER .1.3.6.1.4.1.3181.10.3.4.10.1.5 |
vlanFilterTableThis table contains the vlan filter
configuration. SEQUENCE OF VlanFilterList .1.3.6.1.4.1.3181.10.3.4.20 |
vlanFilterTableEntryEntry in the vlan filter configuration table. VlanFilterList .1.3.6.1.4.1.3181.10.3.4.20.1 |
vlanFilterIdThis entry contains the filter id for the
vlan filter table.ro INTEGER .1.3.6.1.4.1.3181.10.3.4.20.1.1 |
vlanFilterVIDThis entry describes the vlan id for the
filter.rw INTEGER .1.3.6.1.4.1.3181.10.3.4.20.1.2 |
vlanFilterAliasThis entry describes an individual name
for the vlan filter.rw DisplayString .1.3.6.1.4.1.3181.10.3.4.20.1.3 |
vlanFilterEnableThis entry enables or disabled the vlan
filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.4 |
vlanMemberManagerThis entry defines the membership of the
management agent to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.5 |
vlanMemberPort1This entry defines the membership of
port 1 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.6 |
vlanMemberPort2This entry defines the membership of
port 2 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.7 |
vlanMemberPort3This entry defines the membership of
port 3 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.8 |
vlanMemberPort4This entry defines the membership of
port 4 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.9 |
vlanMemberPort5This entry defines the membership of
port 5 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.10 |
vlanMemberPort6This entry defines the membership of
port 6 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.11 |
vlanMemberPort7This entry defines the membership of
port 7 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.12 |
vlanMemberPort8This entry defines the membership of
port 8 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.13 |
vlanMemberPort9This entry defines the membership of
port 9 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.14 |
vlanMemberPort10This entry defines the membership of
port 10 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.15 |
vlanMemberPort11This entry defines the membership of
port 11 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.16 |
vlanMemberPort12This entry defines the membership of
port 12 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.17 |
vlanMemberPort13This entry defines the membership of
port 13 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.18 |
vlanMemberPort14This entry defines the membership of
port 14 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.19 |
vlanMemberPort15This entry defines the membership of
port 15 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.20 |
vlanMemberPort16This entry defines the membership of
port 16 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.21 |
vlanMemberPort17This entry defines the membership of
port 17 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.22 |
vlanMemberPort18This entry defines the membership of
port 18 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.23 |
vlanMemberPort19This entry defines the membership of
port 19 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.24 |
vlanMemberPort20This entry defines the membership of
port 20 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.25 |
vlanMemberPort21This entry defines the membership of
port 21 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.26 |
vlanMemberPort22This entry defines the membership of
port 22 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.27 |
vlanMemberPort23This entry defines the membership of
port 23 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.28 |
vlanMemberPort24This entry defines the membership of
port 24 to the filter.rw Enumeration .1.3.6.1.4.1.3181.10.3.4.20.1.29 |
vlanFilterEnhTableThis table contains the enhanced
vlan filter configuration. SEQUENCE OF VlanFilterEnhList .1.3.6.1.4.1.3181.10.3.4.30 |
vlanFilterEnhTableEntryEntry in the vlan filter enhanced
configuration table. VlanFilterEnhList .1.3.6.1.4.1.3181.10.3.4.30.1 |
vlanFilterEnhIdThis entry contains the filter id for the
enhanced vlan filter table.ro INTEGER .1.3.6.1.4.1.3181.10.3.4.30.1.1 |
vlanFilterEnhFlagsThis Entry contains some flags for
VLAN filter settings. The content is
defined as following:
Bit 0: Filter Enabled
Bit 1: per VID Priority Override Enabledrw INTEGER .1.3.6.1.4.1.3181.10.3.4.30.1.2 |
vlanFilterEnhPriOverrideThis entry contains the priority
value to override an ingress frame with
if its VLAN ID fits, filtering is enabled,
port selective override flag is set and
filter selective override flag is set.rw INTEGER .1.3.6.1.4.1.3181.10.3.4.30.1.3 |
prioritization OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.5 |
prioSupportThis entry contains the information if
prioritization is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.5.1 |
prioQueueCountThis entry defines the number of queues
supported by the device.ro INTEGER .1.3.6.1.4.1.3181.10.3.5.2 |
prioQueueSchemeThis entry defines the queue scheme for
prioritization.rw Enumeration .1.3.6.1.4.1.3181.10.3.5.3 |
prioPortEnableHardwaret prioritization of the device is
applied if all other type of prioritization
are not applicable.ro Enumeration .1.3.6.1.4.1.3181.10.3.5.4 |
prioIeeeTagEnableIf enabled, a IEEE 802.1p tagged frame
will be mapped to the queue that is
assigned to this tagrw Enumeration .1.3.6.1.4.1.3181.10.3.5.5 |
prioDiffservEnableIf enabled a tagged frame will be mapped
to the queue that is assigned to this tag.rw Enumeration .1.3.6.1.4.1.3181.10.3.5.6 |
prioPortTableThis table contains the port prioritization
of the device. This setting is always valid
if no other type of prioritization has been
selected. SEQUENCE OF PrioPortList .1.3.6.1.4.1.3181.10.3.5.10 |
prioPortTableEntryEntry in the port prioritization table. PrioPortList .1.3.6.1.4.1.3181.10.3.5.10.1 |
prioPortIdThis entry describes the device's port id.ro INTEGER .1.3.6.1.4.1.3181.10.3.5.10.1.1 |
prioPortQueueThis entry describes the selected queue
if port prioritization is available.rw INTEGER .1.3.6.1.4.1.3181.10.3.5.10.1.2 |
prioIeeeTagTableThis table contains the configuuration of
IEEE 802.1p prioritization. Each of the 8
different values is assigned to one of the
available queues here. SEQUENCE OF PrioIeeeTagList .1.3.6.1.4.1.3181.10.3.5.20 |
prioIeeeTagTableEntryEntry in the IEEE 802.1p tag prioritization
table. PrioIeeeTagList .1.3.6.1.4.1.3181.10.3.5.20.1 |
prioIeeeTagIdThis entry defines the IEEE 802.1p tag a
queue is assigned to.ro INTEGER .1.3.6.1.4.1.3181.10.3.5.20.1.1 |
prioIeeeTagQueueThis entry describes the selected queue
for each IEEE 802.1p tag.rw INTEGER .1.3.6.1.4.1.3181.10.3.5.20.1.2 |
prioDiffservTableThis table contains the configuuration
of DiffServ prioritization. Each of the
64 different values is assigned to one
of the available queues here. SEQUENCE OF PrioDiffservList .1.3.6.1.4.1.3181.10.3.5.30 |
prioDiffservTableEntryEntry in the Diffserv prioritization table. PrioDiffservList .1.3.6.1.4.1.3181.10.3.5.30.1 |
prioDiffservIdThis entry defines the Diffserv index a
queue is assigned to.ro INTEGER .1.3.6.1.4.1.3181.10.3.5.30.1.1 |
prioDiffservQueueThis entry describes the selected queue
for each Diffserv index.rw INTEGER .1.3.6.1.4.1.3181.10.3.5.30.1.2 |
monitor OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.6 |
monitorSupportThis entry contains the information if
port monitoring is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.6.1 |
monitorModeThis entry enables or disables monitoring
and selects the mode of operation.rw Enumeration .1.3.6.1.4.1.3181.10.3.6.2 |
monitorSourceThis entry contains the monitor source
portnumber.rw INTEGER .1.3.6.1.4.1.3181.10.3.6.3 |
monitorDestinationThis entry contains the monitor
destination portnumber.rw INTEGER .1.3.6.1.4.1.3181.10.3.6.4 |
ring OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.7 |
ringSupportThis entry contains the information if
ethernet ring feature is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.7.1 |
ringCountThe number of supported rings on this system.ro INTEGER .1.3.6.1.4.1.3181.10.3.7.2 |
ringTableThis table contains the ring configuration
of the device. SEQUENCE OF RingList .1.3.6.1.4.1.3181.10.3.7.10 |
ringTableEntryEntry in the ring configuration table. RingList .1.3.6.1.4.1.3181.10.3.7.10.1 |
ringIdThis entry describes the ring id.ro INTEGER .1.3.6.1.4.1.3181.10.3.7.10.1.1 |
ringModeThis entry enables or disables ring mode
and selects the mode of operation.rw Enumeration .1.3.6.1.4.1.3181.10.3.7.10.1.2 |
ringPortAThis entry defines port A for the ring
function. If the device is a 'master'
this is the main port. If ring feature
is not supported a 255 will be replied.rw INTEGER .1.3.6.1.4.1.3181.10.3.7.10.1.3 |
ringPortBThis entry defines port B for the ring
function. If the device is a 'master'
this is the backup port. If ring feature
is not supported a 255 will be replied.rw INTEGER .1.3.6.1.4.1.3181.10.3.7.10.1.4 |
ringNumberThis entry defines the ring ID number.
If ring feature is not supported a 255
will be replied.rw INTEGER .1.3.6.1.4.1.3181.10.3.7.10.1.5 |
ringStatusThis entry defines the ring status.ro Enumeration .1.3.6.1.4.1.3181.10.3.7.10.1.6 |
ringAlarmDurationDuration of ring alarm status (in 0.01s).
This entry is used as additional status
information in repeated ring alarm traps
if error status remains unchanged.
A value of '0' means 'no ring alarm'ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3181.10.3.7.10.1.7 |
couplingred OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.8 |
couplingredSupportThis entry contains the information if ring
coupling redundancy is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.8.1 |
couplingredPortThis entry defines the port for the ring
coupling redundancy function. If not supported
this entry is set to 0.rw INTEGER .1.3.6.1.4.1.3181.10.3.8.2 |
couplingredModeThis entry enables or disables ring
coupling redundancy mode and selects
the mode of operation.rw Enumeration .1.3.6.1.4.1.3181.10.3.8.3 |
couplingredPartnerIpThis entry defines the ip address of the
ring coupling redundancy partner. In backup
mode this is the ip address of the main
device. In main mode this is the ip address
of the backup device. If not supported this
entry is set to 0.0.0.0 .rw IpAddress .1.3.6.1.4.1.3181.10.3.8.4 |
couplingredStatusThis entry defines the ring coupling
redundancy mode status.ro Enumeration .1.3.6.1.4.1.3181.10.3.8.5 |
couplingredPartnerStatusThis entry defines the ring coupling
redundancy mode status.ro Enumeration .1.3.6.1.4.1.3181.10.3.8.6 |
couplingredValidationFlagThis entry defines the validation
of ring coupling redundancy. Bit 0
indicates a valid configuration, Bit 1
indicates a valid status. If ring
coupling redundancy is unsupported or
disabled this entry is set to 255.ro INTEGER .1.3.6.1.4.1.3181.10.3.8.7 |
sfp OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.9 |
sfpSupportThis entry contains the information if
sfp modules are supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.9.1 |
sfpCountThe number of supported sfp modules.ro INTEGER .1.3.6.1.4.1.3181.10.3.9.2 |
sfpTableThis table contains the sfp module
status of the device. SEQUENCE OF SfpList .1.3.6.1.4.1.3181.10.3.9.10 |
sfpTableEntryEntry in the sfp status table. SfpList .1.3.6.1.4.1.3181.10.3.9.10.1 |
sfpIdThis entry describes the sfp id.ro INTEGER .1.3.6.1.4.1.3181.10.3.9.10.1.1 |
sfpPortnumberThis entry describes the number of the port
where the sfp can be plugged in.ro INTEGER .1.3.6.1.4.1.3181.10.3.9.10.1.2 |
sfpDetectThis entry enables or disables uplink
redundancyro Enumeration .1.3.6.1.4.1.3181.10.3.9.10.1.3 |
sfpVendorThis entry describes the vendor name of
the sfp.ro DisplayString .1.3.6.1.4.1.3181.10.3.9.10.1.4 |
sfpVendorPartnumberThis entry describes the vendor
partnumber of the sfp.ro DisplayString .1.3.6.1.4.1.3181.10.3.9.10.1.5 |
sfpVendorSerialnumberThis entry describes the vendor
serialnumber of the sfp.ro DisplayString .1.3.6.1.4.1.3181.10.3.9.10.1.6 |
sfpConnectorThis entry describes the type of
connector of the sfp.ro Enumeration .1.3.6.1.4.1.3181.10.3.9.10.1.7 |
sfpNominalBitrateThis entry describes the nominal bitrate
of the sfp. It is a maximum value, a lower
value may be used instead.ro INTEGER .1.3.6.1.4.1.3181.10.3.9.10.1.8 |
sfpDiagnosticThis entry describes tha avalability and
type of diagnostics.ro Enumeration .1.3.6.1.4.1.3181.10.3.9.10.1.9 |
sfpTemperatureThis entry describes the temperature of
the sfp in multiple of 0.1 degree celsius.ro INTEGER .1.3.6.1.4.1.3181.10.3.9.10.1.10 |
sfpVoltageThis entry describes the supply voltage
of the sfp in multiple of 0.01 V.ro INTEGER .1.3.6.1.4.1.3181.10.3.9.10.1.11 |
sfpTxBiasThis entry describes the transmit bias
current of the sfp in multiple of 0.01 mA.ro INTEGER .1.3.6.1.4.1.3181.10.3.9.10.1.12 |
sfpTxPowerThis entry describes the optical transmit
power of the sfp in multiple of 0.1 uW.ro INTEGER .1.3.6.1.4.1.3181.10.3.9.10.1.13 |
sfpRxPowerThis entry describes the ooptical receive
power of the sfp in multiple of 0.1 uW.ro INTEGER .1.3.6.1.4.1.3181.10.3.9.10.1.14 |
sfpWarningsThis entry contains the flags for internal
warnings. A warning occurrs if regarding
warning threshold is exceeded.ro Bits .1.3.6.1.4.1.3181.10.3.9.10.1.15 |
sfpAlarmsThis entry contains the flags for internal
alarms. An alarm occurrs if regarding
alarm threshold is exceeded.ro Bits .1.3.6.1.4.1.3181.10.3.9.10.1.16 |
relais OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.11 |
relaisSupportThis entry contains the information if
an alram relais is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.11.1 |
relaisCountThe number of supported relais on this
system.ro INTEGER .1.3.6.1.4.1.3181.10.3.11.2 |
relaisTableThis table contains the relais
configuration of the device. SEQUENCE OF RelaisList .1.3.6.1.4.1.3181.10.3.11.10 |
relaisTableEntryEntry in the relais configuration table. RelaisList .1.3.6.1.4.1.3181.10.3.11.10.1 |
relaisIdThis entry describes the relais id.ro INTEGER .1.3.6.1.4.1.3181.10.3.11.10.1.1 |
relaisAliasThis entry contains an individual name
for the relais.rw DisplayString .1.3.6.1.4.1.3181.10.3.11.10.1.2 |
relaisModeThis entry describes the bahaviour of
the alarm relais.rw Enumeration .1.3.6.1.4.1.3181.10.3.11.10.1.3 |
relaisStatusThis entry describes the present status
of the alarm relais.rw Enumeration .1.3.6.1.4.1.3181.10.3.11.10.1.4 |
portaccessctrl OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.12 |
pacSupportThis entry contains the information if
port authentication is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.12.1 |
pacEnableThis entry enables or disables port
authentication.rw Enumeration .1.3.6.1.4.1.3181.10.3.12.2 |
pacUnauthModeThe entry describes the mode of
operation for unauthorized ports.ro Enumeration .1.3.6.1.4.1.3181.10.3.12.3 |
pacUnauthVIDThis entry describes the default VID for
ports which are unauthorized.rw INTEGER .1.3.6.1.4.1.3181.10.3.12.4 |
pacMaxNumberOfAllowedHostsPerPortThe value contains the maximum number of
supported Hosts per port of this device.ro INTEGER .1.3.6.1.4.1.3181.10.3.12.5 |
pacFallbackRequestEnableThis entry describes if authentication
method fallback to MAC authentication
after a request timeout is enabled(1)
or not(2)rw Enumeration .1.3.6.1.4.1.3181.10.3.12.6 |
pacFallbackRequestTimeoutThis entry contains the timeout value in
seconds. If no response to a 802.1X request
has been detected after this time a fallback
to MAC authentication occures if bit 0 of
pacFallbackMode is set.rw INTEGER .1.3.6.1.4.1.3181.10.3.12.7 |
pacFallbackRejectsEnableThis entry describes if authentication
method fallback to MAC authentication
after a limited number of rejects is
enabled(1) or not(2)rw Enumeration .1.3.6.1.4.1.3181.10.3.12.8 |
pacFallbackMaxRejectsThis entry contains the maximum number of
rejects by the Radius server. If this number
is achieved a fallback to MAC authentication
occures if bit 1 of pacFallbackMode is set.rw INTEGER .1.3.6.1.4.1.3181.10.3.12.9 |
pacSupplicantTimeoutThis entry contains the Supplicant
timeout value in seconds.rw INTEGER .1.3.6.1.4.1.3181.10.3.12.10 |
pacReauthEnableThis entry describes if reauthentication
after a configured time will be done(1)
not(2).rw Enumeration .1.3.6.1.4.1.3181.10.3.12.11 |
pacReauthTimeThis entry contains the reauthentication
time period in minutes.rw INTEGER .1.3.6.1.4.1.3181.10.3.12.12 |
pacStatusTableThis table contains the port status
of the port access control feature. SEQUENCE OF PacPortStatusList .1.3.6.1.4.1.3181.10.3.12.100 |
pacStatusTableEntryEntry in the port access control
port status table. PacPortStatusList .1.3.6.1.4.1.3181.10.3.12.100.1 |
pacStatPortIdThis entry describes the port id.ro INTEGER .1.3.6.1.4.1.3181.10.3.12.100.1.1 |
pacStatPortModeThis entry describes the port
access control mode.ro Enumeration .1.3.6.1.4.1.3181.10.3.12.100.1.2 |
pacStatPortStatusThis entry describes the port
access control status.ro Enumeration .1.3.6.1.4.1.3181.10.3.12.100.1.3 |
pacStatUserStatus1This entry describes the port
access control mode status for
the first host.
Note, that different states of
several authentication methods
are summarized here. They are
marked with different multiples
of ten as an offset for each mode.ro Enumeration .1.3.6.1.4.1.3181.10.3.12.100.1.4 |
pacStatUserStatus2This entry describes the port
access control mode status for
the second host.
Note, that different states of
several authentication methods
are summarized here. They are
marked with different multiples
of ten as an offset for each mode.ro Enumeration .1.3.6.1.4.1.3181.10.3.12.100.1.5 |
pacStatUserStatus3This entry describes the port
access control mode status for
the third host.
Note, that different states of
several authentication methods
are summarized here. They are
marked with different multiples
of ten as an offset for each mode.ro Enumeration .1.3.6.1.4.1.3181.10.3.12.100.1.6 |
pacStatUserStatus4This entry describes the port
access control mode status for
the fourth host.
Note, that different states of
several authentication methods
are summarized here. They are
marked with different multiples
of ten as an offset for each mode.ro Enumeration .1.3.6.1.4.1.3181.10.3.12.100.1.7 |
pacStatUserMac1This entry contains the 1st host
mac address at the selected port
if available.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.12.100.1.8 |
pacStatUserMac2This entry contains the 2nd host
mac address at the selected port
if available.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.12.100.1.9 |
pacStatUserMac3This entry contains the 3rd host
mac address at the selected port
if available.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.12.100.1.10 |
pacStatUserMac4This entry contains the 4th host
mac address at the selected port
if available.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.12.100.1.11 |
pacStatUserName1This entry contains the 1st host
user name at the selected port
if available.ro DisplayString .1.3.6.1.4.1.3181.10.3.12.100.1.12 |
pacStatUserName2This entry contains the 2nd host
user name at the selected port
if available.ro DisplayString .1.3.6.1.4.1.3181.10.3.12.100.1.13 |
pacStatUserName3This entry contains the 3rd host
user name at the selected port
if available.ro DisplayString .1.3.6.1.4.1.3181.10.3.12.100.1.14 |
pacStatUserName4This entry contains the 4th host
user name at the selected port
if available.ro DisplayString .1.3.6.1.4.1.3181.10.3.12.100.1.15 |
pacStatUserIp1This entry contains the 1st host
ip address at the selected port
if available.ro IpAddress .1.3.6.1.4.1.3181.10.3.12.100.1.16 |
pacStatUserIp2This entry contains the 2nd host
ip address at the selected port
if available.ro IpAddress .1.3.6.1.4.1.3181.10.3.12.100.1.17 |
pacStatUserIp3This entry contains the 3rd host
ip address at the selected port
if available.ro IpAddress .1.3.6.1.4.1.3181.10.3.12.100.1.18 |
pacStatUserIp4This entry contains the 4th host
ip address at the selected port
if available.ro IpAddress .1.3.6.1.4.1.3181.10.3.12.100.1.19 |
pacConfigTableThis table contains the port status
of the port access control feature. SEQUENCE OF PacPortConfigList .1.3.6.1.4.1.3181.10.3.12.110 |
pacConfigTableEntryEntry in the port access control
port config table. PacPortConfigList .1.3.6.1.4.1.3181.10.3.12.110.1 |
pacConfPortIdThis entry describes the port id.ro INTEGER .1.3.6.1.4.1.3181.10.3.12.110.1.1 |
pacConfModeThis entry describes the port
access control mode .rw Enumeration .1.3.6.1.4.1.3181.10.3.12.110.1.2 |
pacConfMaxMacCountThis entry contains the maximum number of
accessible hosts for the selected port if
mode is set to 'Radius Authentication' or
'ieee 802.1x-Authentication.rw INTEGER .1.3.6.1.4.1.3181.10.3.12.110.1.3 |
pacMacLockingTableThis table contains the port status
of the port access control feature. SEQUENCE OF PacPortMacLockList .1.3.6.1.4.1.3181.10.3.12.120 |
pacMacLockTableEntryEntry in the port access control
port status table. PacPortMacLockList .1.3.6.1.4.1.3181.10.3.12.120.1 |
pacMacLockPortIdThis entry describes the port id.ro INTEGER .1.3.6.1.4.1.3181.10.3.12.120.1.1 |
pacMacLockEnable1This entry describes if the host with
the 1st locked Mac Address gets access
to the selected port or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.12.120.1.2 |
pacMacLockEnable2This entry describes if the host with
the 2nd locked Mac Address gets access
to the selected port or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.12.120.1.3 |
pacMacLockEnable3This entry describes if the host with
the 3rd locked Mac Address gets access
to the selected port or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.12.120.1.4 |
pacMacLockEnable4This entry describes if the host with
the 4th locked Mac Address gets access
to the selected port or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.12.120.1.5 |
pacMacLockLearn1This entry describes if the 1st
Mac Address to lock at the selected port
has to be learned or if it is fixed.rw Enumeration .1.3.6.1.4.1.3181.10.3.12.120.1.6 |
pacMacLockLearn2This entry describes if the 2nd
Mac Address to lock at the selected port
has to be learned or if it is fixed.rw Enumeration .1.3.6.1.4.1.3181.10.3.12.120.1.7 |
pacMacLockLearn3This entry describes if the 3rd
Mac Address to lock at the selected port
has to be learned or if it is fixed.rw Enumeration .1.3.6.1.4.1.3181.10.3.12.120.1.8 |
pacMacLockLearn4This entry describes if the 4th
Mac Address to lock at the selected port
has to be learned or if it is fixed.rw Enumeration .1.3.6.1.4.1.3181.10.3.12.120.1.9 |
pacLockedMac1This entry contains the 1st
locked mac address at
the selected port.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.12.120.1.10 |
pacLockedMac2This entry contains the 2nd
locked mac address at
the selected port.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.12.120.1.11 |
pacLockedMac3This entry contains the 3rd
locked mac address at
the selected port.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.12.120.1.12 |
pacLockedMac4This entry contains the 4th
locked mac address at
the selected port.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.12.120.1.13 |
igmps OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.13 |
igmpsSupportThis entry contains the information if
IGMP Snooping is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.1 |
igmpsEnableThis entry enables or disables the
IGMP Snooping feature.rw Enumeration .1.3.6.1.4.1.3181.10.3.13.2 |
igmpsFastLeaveThis entry enables or disables the
Fast Leave feature.rw Enumeration .1.3.6.1.4.1.3181.10.3.13.3 |
igmpsReportAggregationThis entry enables or disables the
Report Aggregation feature.rw Enumeration .1.3.6.1.4.1.3181.10.3.13.4 |
igmpsFloodingUnregPackThis entry enables or disables the
Flooding Unregister Packet feature.rw Enumeration .1.3.6.1.4.1.3181.10.3.13.5 |
igmpsMaxGroupLimitThis entry defines the maximum
value for the Group Limit.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.6 |
igmpsGroupLimitThis entry defines the Multicast
Group Limit. The maximum valid value
is defined in igmpsMaxGroupLimit.rw INTEGER .1.3.6.1.4.1.3181.10.3.13.7 |
igmpsGroupNumberThis entry defines the present
number of Multicast Groups.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.8 |
igmpsRouterDetectionThis entry defines the mode of
Multicast Router detection.rw Enumeration .1.3.6.1.4.1.3181.10.3.13.9 |
igmpsGroupMembershipIntervalThis entry defines the Multicast
Group Membersip Interval in
multiples of a second.
The default value is 260.rw INTEGER .1.3.6.1.4.1.3181.10.3.13.10 |
igmpsMaximumResposeTimeThis entry defines the Multicast
Group Maximum Response Time in
multiples of a second.
The default value is 10.rw INTEGER .1.3.6.1.4.1.3181.10.3.13.11 |
igmpsLastMemeberQueryTimeThis entry defines the Multicast
Group Last Member Query Time in
multiples of a second.
The default value is 2.rw INTEGER .1.3.6.1.4.1.3181.10.3.13.12 |
igmpsNeighborDeadIntervalThis entry defines the Multicast
Router Neighbor Dead Interval in
multiples of a second.
The default value is 62.rw INTEGER .1.3.6.1.4.1.3181.10.3.13.13 |
igmpsRouterAgingTimeThis entry defines the Multicast
Router Aging Time in multiples
of a second.
The default value is 260.rw INTEGER .1.3.6.1.4.1.3181.10.3.13.14 |
igmpsRxMessageGeneralQueryThis is a counter for received
General Query Messages.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.15 |
igmpsRxMessageSpecificQueryThis is a counter for received
Group Specific Query Messages.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.16 |
igmpsRxMessageReportThis is a counter for received
Report Messages.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.17 |
igmpsRxMessageLeaveThis is a counter for received
Leave Messages.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.18 |
igmpsRxMessageAdvertisementThis is a counter for received
Advertisement Messages.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.19 |
igmpsRxMessageTerminationThis is a counter for received
Termination Messages.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.20 |
igmpsTxMessageSolicitationThis is a counter for transmitted
Solicitation Messages.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.21 |
igmpsCounterResetSet this entry to '1' to reset the
IGMPS packet counters.
This entry is self clearing.rw Enumeration .1.3.6.1.4.1.3181.10.3.13.22 |
igmpsPortTableThis table contains port status information
of the device. SEQUENCE OF IgmpsPortList .1.3.6.1.4.1.3181.10.3.13.30 |
igmpsPortTableEntryEntry in the port value table. IgmpsPortList .1.3.6.1.4.1.3181.10.3.13.30.1 |
igmpsPortIdThis entry describes the port id.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.30.1.1 |
igmpsPortSnoopingThis entry determines if the port
is enabled for IGMP Snooping or
not (if supported).rw Enumeration .1.3.6.1.4.1.3181.10.3.13.30.1.2 |
igmpsPortStaticRouterThis entry determins if the port
is defined as static router port or
not (if supported).rw Enumeration .1.3.6.1.4.1.3181.10.3.13.30.1.3 |
igmpsPortDynamicRouterThis entry ddocuments if a router
has been detected at this port or
not (if supported).ro Enumeration .1.3.6.1.4.1.3181.10.3.13.30.1.4 |
igmpsGroupTableThis table contains port status information
of the device. SEQUENCE OF IgmpsGroupList .1.3.6.1.4.1.3181.10.3.13.40 |
igmpsGroupTableEntryEntry in the port value table. IgmpsGroupList .1.3.6.1.4.1.3181.10.3.13.40.1 |
igmpsGroupIdThis entry describes the Multicast
Group id.ro Unsigned32 .1.3.6.1.4.1.3181.10.3.13.40.1.1 |
igmpsGroupMacThis entry documents the Multicast Group's
MAC-Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.3.13.40.1.2 |
igmpsGroupVlanIdThis entry documents the Vlan ID
of the Multicast Group.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.40.1.3 |
igmpsGroupTimestampThis entry documents the Timestamp
of the Multicast Group in seconds.ro INTEGER .1.3.6.1.4.1.3181.10.3.13.40.1.4 |
igmpsGroupLeaveFlagThis entry documents if the Leave
Flag has been set or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.5 |
igmpsGroupMemberPort1This entry defines the membership of
port 1 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.6 |
igmpsGroupMemberPort2This entry defines the membership of
port 2 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.7 |
igmpsGroupMemberPort3This entry defines the membership of
port 3 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.8 |
igmpsGroupMemberPort4This entry defines the membership of
port 4 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.9 |
igmpsGroupMemberPort5This entry defines the membership of
port 5 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.10 |
igmpsGroupMemberPort6This entry defines the membership of
port 6 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.11 |
igmpsGroupMemberPort7This entry defines the membership of
port 7 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.12 |
igmpsGroupMemberPort8This entry defines the membership of
port 8 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.13 |
igmpsGroupMemberPort9This entry defines the membership of
port 9 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.14 |
igmpsGroupMemberPort10This entry defines the membership of
port 10 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.15 |
igmpsGroupMemberPort11This entry defines the membership of
port 11 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.16 |
igmpsGroupMemberPort12This entry defines the membership of
port 12 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.17 |
igmpsGroupMemberPort13This entry defines the membership of
port 13 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.18 |
igmpsGroupMemberPort14This entry defines the membership of
port 14 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.19 |
igmpsGroupMemberPort15This entry defines the membership of
port 15 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.20 |
igmpsGroupMemberPort16This entry defines the membership of
port 16 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.21 |
igmpsGroupMemberPort17This entry defines the membership of
port 17 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.22 |
igmpsGroupMemberPort18This entry defines the membership of
port 18 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.23 |
igmpsGroupMemberPort19This entry defines the membership of
port 19 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.24 |
igmpsGroupMemberPort20This entry defines the membership of
port 20 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.25 |
igmpsGroupMemberPort21This entry defines the membership of
port 21 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.26 |
igmpsGroupMemberPort22This entry defines the membership of
port 22 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.27 |
igmpsGroupMemberPort23This entry defines the membership of
port 23 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.28 |
igmpsGroupMemberPort24This entry defines the membership of
port 24 to the Multicast Group.ro Enumeration .1.3.6.1.4.1.3181.10.3.13.40.1.29 |
rtc OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.15 |
rtcSupportThis entry contains the information if
software based real time clock
is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.15.1 |
rtcFlagsThis Entry contains per port some bitwise
rtc settings:
Bit 0: if set rtc should be synchronized
with configured SNTP server
Bit 1: is set if DST support is enabledrw Enumeration .1.3.6.1.4.1.3181.10.3.15.2 |
rtcLocalTimeThis entry contains the local date
and time information. Used format conforms
to RFC2068 like example below:
Mon Jun 21 17:20:34 2010ro DisplayString .1.3.6.1.4.1.3181.10.3.15.3 |
rtcManualTimeOn readout this entry contains the local
date and time information. Writing to this
entry sets the the date and time information
of the device manually. Used format is
'DD.MM.YYYY HH:MM:SS'rw DisplayString .1.3.6.1.4.1.3181.10.3.15.4 |
rtcTimeStatusThis entry contains the information
about the reliability of the date and
time information of the device.ro Enumeration .1.3.6.1.4.1.3181.10.3.15.5 |
rtcTimezoneOffsetThis entry describes the time offset to UTC
regarding the timezone of the device. The units
of this entry are multiples of 30 minutes.rw INTEGER (-24..24) .1.3.6.1.4.1.3181.10.3.15.6 |
rtcDSTOffsetThis entry describes the time offset to UTC
regarding the timezone of the device. This
entry is measured in minutes.rw INTEGER .1.3.6.1.4.1.3181.10.3.15.7 |
rtcDSTbeginThis entry contains the hexadecimal represenation
of the proprietary coded time of the beginning of
DST period. See corresponding feature description
for detailed information.rw OCTET STRING .1.3.6.1.4.1.3181.10.3.15.8 |
rtcDSTendThis entry contains the hexadecimal represenation
of the proprietary coded time of the end of DST
period. See corresponding feature description for
detailed information.rw OCTET STRING .1.3.6.1.4.1.3181.10.3.15.9 |
rtcDSTstatusIf DST support is enabled this entry
contains the information if DST period
is active now(1) or not(2). Else a value
of 255 will be read out.ro Enumeration .1.3.6.1.4.1.3181.10.3.15.10 |
rtcSNTPsyncIntervalThis entry describes the time interval
for repeated to synchronisation of the
device with a given SNTP server if this
feature is enabled. This value is measured
in minutes. It should not be set too small
to avoid server overload in larger networks.
A typical value should be 10080 which
represents once a week.rw INTEGER .1.3.6.1.4.1.3181.10.3.15.11 |
rtcSNTPsyncNowSet this entry to '1' to trigger a rtc
sychronisation with SNTP server now.
This entry is self clearing.rw Enumeration .1.3.6.1.4.1.3181.10.3.15.12 |
rtcSNTPServerCountThe number of supported SNTP servers
on this system.ro INTEGER .1.3.6.1.4.1.3181.10.3.15.13 |
rtcSNTPServerTableThis table contains the configuration for
several SNTP servers. SEQUENCE OF SNTPServerList .1.3.6.1.4.1.3181.10.3.15.20 |
rtcSNTPServerTableEntryEntry in the SNTP server table. SNTPServerList .1.3.6.1.4.1.3181.10.3.15.20.1 |
rtcSNTPServerIdThis entry contains the SNTP server ID.ro INTEGER .1.3.6.1.4.1.3181.10.3.15.20.1.1 |
rtcSNTPServerStatusThis entry describes the SNTP server
status as retransmitted after sync.ro Enumeration .1.3.6.1.4.1.3181.10.3.15.20.1.2 |
rtcSNTPServerEnableThis entry describes the SNTP server
enable status.rw Enumeration .1.3.6.1.4.1.3181.10.3.15.20.1.3 |
rtcSNTPServerIpAddressThis entry describes the SNTP server
IP address.rw IpAddress .1.3.6.1.4.1.3181.10.3.15.20.1.4 |
consoleinterface OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.20 |
consoleSupportThis entry contains the bitwise information
which console version is supported.
Bit 0: Telnet supported
Bit 1: SSH supportedro INTEGER .1.3.6.1.4.1.3181.10.3.20.1 |
consoleEnableThis entry contains the bitwise information
which console version is enabled.
Bit 0: Telnet enabled
Bit 1: SSH enabled
Changing this entry takes effect after reset.rw INTEGER .1.3.6.1.4.1.3181.10.3.20.2 |
consoleTimeoutThis entry describes the timout value in
multiples of a second. This is the period
of inactivity after which the telnet
connection shuts down automatically.rw INTEGER .1.3.6.1.4.1.3181.10.3.20.3 |
consoleApplyModeIf this entry is set to '1' changes due
to 'set...' commands are immediately applied
to the switch and saved in the configuration.
If it is set to '2' changes are also applied
immediately but the changed configuration
will not be saved. If it is set to '3'
changes are neither applied to the switch
nor the configuration is saved.
Using the 'save settings' command at the
telnet console the configuration will be
applied and saved.
After a reset this value is always set to
the default value of 2 (saveManually).rw Enumeration .1.3.6.1.4.1.3181.10.3.20.4 |
consolePromptThis is the string used as prompt
for the telnet console.rw DisplayString .1.3.6.1.4.1.3181.10.3.20.5 |
webinterface OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.21 |
webSupportThis entry contains the bitwise information
which web interface version is supported.
Bit 0: HTTP supported
Bit 1: HTTPS supportedro INTEGER .1.3.6.1.4.1.3181.10.3.21.1 |
webEnableThis entry contains the bitwise information
which web interface version is enabled.
Bit 0: HTTP enabled
Bit 1: HTTPS enabled
Changing this entry takes effect after reset.rw INTEGER .1.3.6.1.4.1.3181.10.3.21.2 |
snmpinterface OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.22 |
snmpSupportThis entry contains the bitwise information
which SNMP version is supported.
Bit 0: SNMP v1 supported
Bit 1: SNMP v2c supported
Bit 2: SNMP v3 supportedro INTEGER .1.3.6.1.4.1.3181.10.3.22.1 |
snmpEnableThis entry contains the bitwise information
which SNMP version is enabled.
Bit 0: SNMP v1 enabled
Bit 1: SNMP v2c enabled
Bit 2: SNMP v3 enabled
It is not allowed to disable an interface via
itself or to support v1/v2c at the same time
as v3 is enabled. So v1 or v2c can only be
enabled via this entry if v3 is disabled.
Further changes have to be done via another
Interface.rw INTEGER .1.3.6.1.4.1.3181.10.3.22.2 |
snmpApplyModeIf this entry is set to '1' changes due
to 'set...' commands are immediately applied
to the switch and saved in the configuration.
If it is set to '2' changed are also applied
immedately but the changed configuration will
not be saved. So changes are lost after a
reset. To save the configuration an additional
self clearing 'snmpApply' has to be set to '1'
for an apply without save or set to '2' for an
apply including save.
After a reset this value is always set to the
default value of 1 (applyAndSaveImmediately).rw Enumeration .1.3.6.1.4.1.3181.10.3.22.3 |
snmpApplyThis entry only has an effect if 'snmpApplyMode'
is not set to '1', which is the normal operation.
In this case the changed configuration will be
applied to the switch (if set to '1') or applied
to switch and saved to flash (if set to '2').
This entry is self-clearing.rw Enumeration .1.3.6.1.4.1.3181.10.3.22.4 |
snmpTrapTestThis entry triggers a trap event without
the regarding system event took place.
No change to the device will be done.
This entry can be used to test the trap
destination configuration.
This entry is self clearing.rw Enumeration .1.3.6.1.4.1.3181.10.3.22.5 |
snmpTrapDestCountThe number of supported trap destinations
on this system.ro INTEGER .1.3.6.1.4.1.3181.10.3.22.6 |
snmpCommunityReadThis is the string used as community name
in SNMP Get and GetNext requests.rw DisplayString .1.3.6.1.4.1.3181.10.3.22.7 |
snmpCommunityWriteThis is the string used as community name
in SNMP Set operations.rw DisplayString .1.3.6.1.4.1.3181.10.3.22.8 |
snmpTrapEnableThis entry contains the information if
snmp traps are globally enabled or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.22.9 |
snmpTrapDestTableThis table contains information regarding
the snmp trap configuration for several
destinations. SEQUENCE OF SnmpTrapDestList .1.3.6.1.4.1.3181.10.3.22.10 |
snmpTrapDestTableEntryEntry in the snmp table. SnmpTrapDestList .1.3.6.1.4.1.3181.10.3.22.10.1 |
snmpTrapDestIdThis entry describes the snmp trap
destination id.ro INTEGER .1.3.6.1.4.1.3181.10.3.22.10.1.1 |
snmpTrapDestAliasThis entry contains an individual name
for the trap destination.rw DisplayString .1.3.6.1.4.1.3181.10.3.22.10.1.2 |
snmpTrapDestEnThis entry describes the snmp trap
destination enable status and contains
the used snmp version.rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.3 |
snmpTrapDestIPThis is the trap receiver's IP address.rw IpAddress .1.3.6.1.4.1.3181.10.3.22.10.1.4 |
snmpTrapDestCommunityThis is the string used as community name
for traps.rw DisplayString .1.3.6.1.4.1.3181.10.3.22.10.1.5 |
snmpTrapGenColdstartThis entry enables or disables the
transmission of generic coldstart
traps to the selected destination.
(generic trapnumber 0)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.6 |
snmpTrapGenWarmstartThis entry enables or disables the
transmission of generic warmstart
traps to the selected destination.
(generic trapnumber 1)ro Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.7 |
snmpTrapGenLinkDownThis entry enables or disables the
transmission of generic link down
traps to the selected destination.
(generic trapnumber 2)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.8 |
snmpTrapGenLinkUpThis entry enables or disables the
transmission of generic link up
traps to the selected destination.
(generic trapnumber 3)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.9 |
snmpTrapGenAuthFailureThis entry enables or disables the
transmission of generic authentication
failure traps to the selected destination.
(generic trapnumber 4)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.10 |
snmpTrapGenEgpNeighborLossThis entry enables or disables the
transmission of generic Exterior Gateway
Protocol Neighbor Loss traps to the
selected destination.
(generic trapnumber 5)ro Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.11 |
snmpTrapEntLinkChangeThis entry enables or disables the
transmission of enterprise link change
traps to the selected destination.
(generic trap# 6, specific trap# 1)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.12 |
snmpTrapEntFactoryResetThis entry enables or disables the
transmission of enterprise factory
reset traps to the selected destination.
(generic trap# 6, specific trap# 2)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.13 |
snmpTrapEntTemperatureLevelChangeThis entry enables or disables the
transmission of enterprise temperature
level change traps to the selected
destination.
(generic trap# 6, specific trap# 3)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.14 |
snmpTrapEntErrorCounterThis entry enables or disables the
transmission of enterprise error counter
traps to the selected destination
(generic trap# 6, specific trap# 4)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.15 |
snmpTrapEntUnderOverVoltageThis entry enables or disables the
transmission of enterprise undervoltage
overvoltage traps to the selected
destination.
(generic trap# 6, specific trap# 5)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.16 |
snmpTrapEntTempShutDownThis entry enables or disables the
transmission of enterprise temperature
shut down event traps to the selected
destination.
(generic trap# 6, specific trap# 6)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.17 |
snmpTrapEntPoeLimitExceededThis entry enables or disables the
transmission of enterprise poe limit
exceeded traps to the selected
destination.
(generic trap# 6, specific trap# 7)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.18 |
snmpTrapEntSupplyStatusChangeThis entry enables or disables the
transmission of enterprise supply status
change traps to the selected destination.
(generic trap# 6, specific trap# 8)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.19 |
snmpTrapEntSfpPlugChangeThis entry enables or disables the
transmission of enterprise SFP plug
change traps to the selected destination.
(generic trap# 6, specific trap# 9)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.20 |
snmpTrapEntLoginFailureThis entry enables or disables the
transmission of enterprise login failure
traps to the selected destination.
(generic trap# 6, specific trap# 10)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.21 |
snmpTrapEntRingBrokenThis entry enables or disables the
transmission of enterprise Ring broken
traps to the selected destination.
(generic trap# 6, specific trap# 11)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.22 |
snmpTrapEntRingAlarmThis entry enables or disables the
transmission of enterprise Ring Alarm
traps to the selected destination.
(generic trap# 6, specific trap# 12)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.23 |
snmpTrapEntAuthPwFailThis entry enables or disables
the transmission of enterprise
SNMPv3 Authentication Password Fail traps
to the selected destination.
(generic trap# 6, specific trap# 13)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.24 |
snmpTrapEntPrivPwFailThis entry enables or disables
the transmission of enterprise
SNMPv3 Privacy Password Fail traps
to the selected destination.
(generic trap# 6, specific trap# 14)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.25 |
snmpTrapEntAccessPermissionThis entry enables or disables
the transmission of enterprise
SNMPv3 Access Permission traps
to the selected destination.
(generic trap# 6, specific trap# 15)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.26 |
snmpTrapEntSeclevelFailThis entry enables or disables
the transmission of enterprise
SNMPv3 Security Level Fail traps
to the selected destination.
(generic trap# 6, specific trap# 16)rw Enumeration .1.3.6.1.4.1.3181.10.3.22.10.1.27 |
udpinterface OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.23 |
udpSupportThis entry contains the information if the
proprietary udp protocol interface is
supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.23.1 |
udpEnableThis entry enables or disables the
proprietary udp protocol Support.
Changing this entry takes effect
after a reset.rw Enumeration .1.3.6.1.4.1.3181.10.3.23.2 |
syslog OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.24 |
syslogSupportThis entry contains the information if
syslog message servers are supported
or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.24.1 |
syslogEnableThis entry contains the information if
syslog message server support is enabled
or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.24.2 |
syslogMessageTestThis entry triggers a syslog message
using the current destination settings.
This entry can be used to test the
destination configuration.
This entry is self clearing.rw Enumeration .1.3.6.1.4.1.3181.10.3.24.3 |
syslogDestCountThe number of supported syslog destinations
on this system.ro INTEGER .1.3.6.1.4.1.3181.10.3.24.4 |
syslogDestTableThis table contains the configuration for
several syslog destinations. SEQUENCE OF SyslogDestList .1.3.6.1.4.1.3181.10.3.24.10 |
syslogDestTableEntryEntry in the syslog destination table. SyslogDestList .1.3.6.1.4.1.3181.10.3.24.10.1 |
syslogDestIdThis entry contains the syslog
destination id.ro INTEGER .1.3.6.1.4.1.3181.10.3.24.10.1.1 |
syslogDestAliasThis entry contains an individual
name for the syslog destination.rw DisplayString .1.3.6.1.4.1.3181.10.3.24.10.1.2 |
syslogDestEnableThis entry describes the syslog
destination enable status.rw Enumeration .1.3.6.1.4.1.3181.10.3.24.10.1.3 |
syslogDestIpAddressThis entry describes the syslog
destination IP address.rw IpAddress .1.3.6.1.4.1.3181.10.3.24.10.1.4 |
syslogDestPortThis is the syslog destination's
TCP port.rw INTEGER .1.3.6.1.4.1.3181.10.3.24.10.1.5 |
syslogDestFacilityThis entry describes the syslog
destination used facility value.rw Enumeration .1.3.6.1.4.1.3181.10.3.24.10.1.6 |
syslogDestEventFilterFlags to filter syslog events:
messages are only sent if regarding
bits are set.rw Bits .1.3.6.1.4.1.3181.10.3.24.10.1.7 |
radius OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.25 |
radiusSupportThis entry contains the information if
communication with radius servers is
supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.25.1 |
radiusAccessEnableThis entry contains the information if
the radius servers' access service is
enabled or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.25.2 |
radiusAccountEnableThis entry contains the information if
the radius servers' account service is
enabled or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.25.3 |
radiusServerCountThe number of supported radius servers
on this system.ro INTEGER .1.3.6.1.4.1.3181.10.3.25.4 |
radiusMacAuthPasswordPassword used for MAC Authentication via
radius servers.rw DisplayString .1.3.6.1.4.1.3181.10.3.25.5 |
radiusUseMacAsPasswordThis entry contains the information if
the user's MAC address is used as password
instead of the static radius password or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.25.6 |
radiusMacSeparatorCharacter to separate the bytes of the
MAC Address for Radius Server communication.rw DisplayString .1.3.6.1.4.1.3181.10.3.25.7 |
radiusTimeoutThis entry contains the time in seconds
after which the radius server should have
answered arequest.rw INTEGER .1.3.6.1.4.1.3181.10.3.25.8 |
radiusServerTableThis table contains the configuration
for several radius servers. SEQUENCE OF RadiusServerList .1.3.6.1.4.1.3181.10.3.25.10 |
radiusServerTableEntryEntry in the radius server table. RadiusServerList .1.3.6.1.4.1.3181.10.3.25.10.1 |
radiusServerIdThis entry contains the radius server id.ro INTEGER .1.3.6.1.4.1.3181.10.3.25.10.1.1 |
radiusServerAliasThis entry contains an individual name for
the radius server.rw DisplayString .1.3.6.1.4.1.3181.10.3.25.10.1.2 |
radiusServerEnableAccessThis entry describes the radius
server enable status for the
MAX-ACCESS service which means both,
authentication and authorization.rw Enumeration .1.3.6.1.4.1.3181.10.3.25.10.1.3 |
radiusServerEnableAccountThis entry describes the radius
server enable status for the
account service.rw Enumeration .1.3.6.1.4.1.3181.10.3.25.10.1.4 |
radiusServerIpAddressThis entry describes the radius server
IP address.rw IpAddress .1.3.6.1.4.1.3181.10.3.25.10.1.5 |
radiusServerAccessPortThis is the radius server's UDP port
for the access service. The default
value is 1812.rw INTEGER .1.3.6.1.4.1.3181.10.3.25.10.1.6 |
radiusServerAccountPortThis is the radius server's UDP port
for the account service. The default
value is 1813.rw INTEGER .1.3.6.1.4.1.3181.10.3.25.10.1.7 |
radiusServerSecretThis is the radius server's secret string.rw DisplayString .1.3.6.1.4.1.3181.10.3.25.10.1.8 |
supply OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.30 |
supplyCountThe number of supported power supplies.ro INTEGER .1.3.6.1.4.1.3181.10.3.30.1 |
supplyTableThis table contains power supply
information of the device. SEQUENCE OF SupplyList .1.3.6.1.4.1.3181.10.3.30.10 |
supplyTableEntryEntry in the supply table. SupplyList .1.3.6.1.4.1.3181.10.3.30.10.1 |
supplyIdThis entry describes the power supply id.ro INTEGER .1.3.6.1.4.1.3181.10.3.30.10.1.1 |
supplyUsedIf several supplies are possible but not
required, this entry decides if an invalid
detection leads to an error. An error event
can be suppressed if a supply is marked as
'unused'. Hint: If an 'unused' supply is
detected as 'valid', it is also automatically
marked as 'used'.rw Enumeration .1.3.6.1.4.1.3181.10.3.30.10.1.2 |
supplyStatusThis entry contains the information if the
power supply is valid at the moment. An
invalid supply will lead to an error event
unless it is marked as 'unused'.
Hint: If an 'unused' supply is detected as
'valid', it is also automatically marked
as 'used'.ro Enumeration .1.3.6.1.4.1.3181.10.3.30.10.1.3 |
poepse OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.31 |
poepseSupportThis entry contains the information if this
is a POE power source equipment (PSE) or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.31.1 |
poepseEnableThis entry contains the information if
the POE/PSE feature is enabled or not.rw Enumeration .1.3.6.1.4.1.3181.10.3.31.2 |
poepseTotalInputPowerThis entry contains the input power (in W)
due to the used power supply.rw INTEGER .1.3.6.1.4.1.3181.10.3.31.3 |
poepseMaxInputPowerThis entry contains maximum available input
power (in W) due to hardware restrictions
in the switch device.ro INTEGER .1.3.6.1.4.1.3181.10.3.31.4 |
poepseDeviceSupplyPowerThis entry contains the power (in W) the
switch device spends itself. This value
is needed to calculate the available
power for external devices.ro INTEGER .1.3.6.1.4.1.3181.10.3.31.5 |
pseAvailablePowerThis entry contains the available poe
power (in W) for attached external
devices.ro INTEGER .1.3.6.1.4.1.3181.10.3.31.6 |
poepseExtendedVoltageThis entry contains the information if
the POE/PSE Extended Voltage is enabled
or not. If enabled PoE will be disabled
if applied PoE output voltage exceeds an
enhanced range of 40..59V instead of
43..55V (default).rw Enumeration .1.3.6.1.4.1.3181.10.3.31.7 |
poepsePortTableThis table contains the pse port
configuration of the device. SEQUENCE OF PoePsePortList .1.3.6.1.4.1.3181.10.3.31.10 |
poepsePortTableEntryEntry in the supply table. PoePsePortList .1.3.6.1.4.1.3181.10.3.31.10.1 |
poepsePortIdThis entry describes the device's pse
port id.ro INTEGER .1.3.6.1.4.1.3181.10.3.31.10.1.1 |
poepsePortModeThis entry describes the device's pse
port mode.rw Enumeration .1.3.6.1.4.1.3181.10.3.31.10.1.2 |
poepsePortStatusThis entry describes the device's pse
port mode.ro Enumeration .1.3.6.1.4.1.3181.10.3.31.10.1.3 |
poepsePortMaxPowerThis entry describes the permitted
power for this port in mW.rw INTEGER .1.3.6.1.4.1.3181.10.3.31.10.1.4 |
poepsePortMeasuredPowerThis entry describes the measured
power for this port in mW.ro INTEGER .1.3.6.1.4.1.3181.10.3.31.10.1.5 |
poepsePortMaxClassThis entry describes the maximnum
allowed poe class for this port.rw Enumeration .1.3.6.1.4.1.3181.10.3.31.10.1.6 |
poepsePortDetectedClassThis entry describes the detected
poe class for this port.ro Enumeration .1.3.6.1.4.1.3181.10.3.31.10.1.7 |
poepsePortMeasuredVoltageThis entry describes the measured
Voltage for this port in multiples
of 0.1V.ro INTEGER .1.3.6.1.4.1.3181.10.3.31.10.1.8 |
poepd OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.32 |
poepdSupportThis entry contains the information if
this is a POE powered device (PD) or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.32.1 |
hardwarecode OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.33 |
hardwarecodeSupportThis entry contains the information if a
hardware coding (hard wired or selectable)
is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.33.1 |
hardwarecodeNumberThis entry describes the value of the
detected hardware code with a range
of [0..15]. If this feature isa not
supported a 255 will be given back.ro INTEGER .1.3.6.1.4.1.3181.10.3.33.2 |
spanningtree OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.34 |
stpSupportThis entry contains the information if the
spanning tree feature is supported or not.ro Enumeration .1.3.6.1.4.1.3181.10.3.34.1 |
stpEnableThis entry contains the information if
the spanning feature is enabled or not.
If supported the settings and status
information are accessible via standard
BRIDGE-MIBrw Enumeration .1.3.6.1.4.1.3181.10.3.34.2 |
msSwitchNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.3.100 |
linkChangeNotificationTrap indicating that a port's link status
has changed. The port is identified by the
portId variable. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.1 |
factoryResetNotificationTrap indicating a factory reset initiated
by the user. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.2 |
temperatureLevelChangeNotificationTrap indicating the device temperature level
has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.3 |
errorcountNotificationTrap indicating errors received at a port. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.4 |
underOverVoltageNotificationTrap indicating the PoLAN port voltage is
out of operating range and port power has
been turned off. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.5 |
temperatureShutdownNotificationTrap indicating that the device temperature
is above maximum operating temperature and
the device will be shut down. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.6 |
portPoELimitExceededNotificationTrap indicating that port power has been
turned off by power management. The power
limit for one port or for the whole device
is exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.7 |
powerSupplyStatusChangeNotificationTrap indicating that main or redundant power
input status has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.8 |
sfpPlugChangeNotificationTrap indicating that a sfp module has been
plugged in or plugged out. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.9 |
loginFailureNotificationTrap indicating a login attempt
with an invalid password. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.10 |
ringBrokenNotificationTrap indicating a link down detect
at activated ring port. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.11 |
ringAlarmNotificationTrap indicating a Ring alert reception. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.12 |
snmpv3AuthenticationPwFailNotificationNotification indicating an Authentication
Password failure. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.13 |
snmpv3PrivacyPwFailNotificationNotification indicating a Privacy
Password failure. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.14 |
snmpv3AccessPermissionNotificationNotification indicating a write attempt
without matching WriteView defined. NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.15 |
snmpv3SeclevelFailNotificationNotification indicating a user
Security Level mismatch NOTIFICATION-TYPE .1.3.6.1.4.1.3181.10.3.100.16 |