G6-FACTORY-MIB
The G6-FACTORY-MIB provides vendor-specific monitoring and management capabilities for Microsens Generation 6 Ethernet switches, exposing proprietary OID namespaces for device status, port statistics, and hardware telemetry. This module enables granular visibility into switch-specific operational parameters and factory-defined metrics not covered by standard IETF MIBs.
Imported Objects
Objects
16 total| Object Name |
|---|
deviceMicrosens private MIB for Generation 6 Ethernet Switches MODULE-IDENTITY .1.3.6.1.4.1.3181.10.6.1 |
factory OBJECT IDENTIFIER .1.3.6.1.4.1.3181.10.6.1.32 |
factoryArticleNumberThis device article number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.1 |
factorySerialNumberThis device serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.2 |
factoryDeviceMacThis device MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.3 |
factoryNumberOfMacsNumber of MAC addresses this device supports.ro Integer32 .1.3.6.1.4.1.3181.10.6.1.32.4 |
factoryHardwareVersionThis device hardware revision number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.5 |
factoryBoardIdThis identifies the basic hardware type for internal operation.ro Unsigned32 .1.3.6.1.4.1.3181.10.6.1.32.6 |
factoryProjectNumberDevelopment project number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.7 |
factoryMechanicalFeaturesBit mask which identifies mechanical features of this device.ro Bits .1.3.6.1.4.1.3181.10.6.1.32.8 |
factoryHardwareFeaturesBit mask which identifies installed hardware features of this device.ro Bits .1.3.6.1.4.1.3181.10.6.1.32.9 |
factoryCompanyNameComplete name and address of the manufacturing company.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.10 |
factoryCompanyShortShorthand name of the manufacturing company.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.11 |
factoryWebLinkLink to company homepage.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.12 |
factoryWebDescriptionProduct feature summary.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.13 |
factoryCustomInfoThis field can be used to permanently store custom inventory or location data. The data are stored within the device in unremovable storage and thus will persist even when the SD card or the entire configuration is changed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3181.10.6.1.32.14 |
More MIBs from Microsens
Browse all MicrosensMIBs →The MS-SWITCH30-MIB module provides SNMP-based management capabilities for Microsoft Switch 30 series hardware, enabling the monitoring of interface status, port statistics, and device operational parameters.
The G6-HARDWARE-MIB provides vendor-specific SNMP access to monitor physical layer telemetry and hardware status indicators, including temperature, fan speeds, and power supply states, for Microsens Generation 6 Ethernet switches. This module enables granular fault detection and environmental monitoring by exposing hardware component health metrics not covered by standard IETF MIBs.
Standard SNMP MIB module defining data structures for MICROSENS-CWDM8-MIB.
The RING-MIB module facilitates the monitoring and management of Coriolis ring network topologies, specifically tracking ring port states, topology changes, and loop prevention mechanisms within Coriolis switching hardware.
The G6-RING-MIB facilitates the monitoring and management of Generation 6 Microsens Ethernet switches, specifically enabling the tracking of ring topology status, port states, and redundancy protocol events to ensure network resilience.
The G6-WIFI-MIB module provides vendor-specific SNMP extensions for Microsens Generation 6 Ethernet Switches to monitor Wi-Fi interface states, client association counts, signal strength metrics, and radio channel utilization. This private MIB enables granular visibility into wireless subsystem performance and connectivity anomalies on Microsens hardware that are not covered by standard IETF MIBs.