EFDATA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for EFDATA-MIB.
155
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
155 total| Object Name |
|---|
efdata OBJECT IDENTIFIER .1.3.6.1.4.1.6247 |
RFC1155-SMI Unknown .1.3.6.1.4.1.6247 |
spectracast OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3 |
dtmx5000 OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1 |
cbGateway OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1 |
cbStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.1 |
cbStatGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.1.1 |
cbStatNumBytesTXedNumber of bytes transmitted since last statistics reset.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.1.1 |
cbStatNumOfPacketsNumber of data packets transmitted since last statistics reset.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.1.2 |
cbStatAvrPktSizeAverage packet size since last statistics reset.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.1.3 |
cbStatAvrBytesPerSecAverage speed in bytes per second since last statistics reset.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.1.4 |
cbStatNumPacketDiscardedNumber of data packets that were discarded since last statistics reset.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.1.5 |
cbStatNumNMSFramesNumber of NMS packets received since last statistics reset.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.1.6 |
cbCPULoadCurrent CPU Load in percents (0-100).ro Counter .1.3.6.1.4.1.6247.3.1.1.1.1.7 |
cbMemoryUsageCurrent Memory Usage in percents (0-100).ro Counter .1.3.6.1.4.1.6247.3.1.1.1.1.8 |
cbStatResetSet to cbTrue in order to reset the general statistics values
(either in active or non-active mode).rw Enumeration .1.3.6.1.4.1.6247.3.1.1.1.1.9 |
cbStatNumClientsNumber of clients currently connected to the Gateway.
It is not part of the General Statistics since the
cbStatReset does not change its value.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.1.10 |
cbStatClient OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.1.2 |
cbClientIPThe IP address of the client. The rest of the params in
cbStatClient reffers to this IP.
In order to get a statistics on a single clients,
set cbClientIP to the IP of the desired client and
get the results under cbClientStatistics.
Continuously get operations of the rest of the params
will give the updated statistics values without a need
to set cbClientIP again and again.rw IpAddress .1.3.6.1.4.1.6247.3.1.1.1.2.1 |
cbClientStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.1.2.2 |
cbClNumSecondsThe number of seconds since the client statistics are
active.
The statistics values are reset automaticaly by
the gateway (as well as by setting cbClReset) according
to the value of cbFreqClientsInfoReset.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.2.2.1 |
cbClNumKBytesNumber of bytes transmitted to IP==cbClientIP
in the last cbClNumSeconds seconds.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.2.2.2 |
cbClNumPacketsNumber of packets transmitted to IP==cbClientIP
in the last cbClNumSeconds seconds.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.2.2.3 |
cbClAvrBytesPerSecondAverage transfer rate in bytes per second for this client.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.2.2.4 |
cbClNumPacketsDiscardedNumber of packets discarded to IP==cbClientIP
in the last cbClNumSeconds seconds.ro Counter .1.3.6.1.4.1.6247.3.1.1.1.2.2.5 |
cbClStatResetSet ot non-zero - Reset the statistics values for the client cbClientIP.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.1.2.2.6 |
cbClEncrEnbledIf this variable is True then the user desire encryption.
This value may not changed and it is NOT changed by setting cbClStatReset.ro Enumeration .1.3.6.1.4.1.6247.3.1.1.1.2.2.7 |
cbStatClTable OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.1.3 |
cbClTableThis table contains updated statistics of all clients known to the gateway. SEQUENCE OF CbClTableNode .1.3.6.1.4.1.6247.3.1.1.1.3.1 |
cbClTableNodeInformation about a particular client. CbClTableNode .1.3.6.1.4.1.6247.3.1.1.1.3.1.1 |
cbClTableIPThe clients IP.ro IpAddress .1.3.6.1.4.1.6247.3.1.1.1.3.1.1.1 |
cbClTableStampTimeThe clients Stamp Time.ro INTEGER .1.3.6.1.4.1.6247.3.1.1.1.3.1.1.2 |
cbClTableStartTimeThe clients Start Time.ro INTEGER .1.3.6.1.4.1.6247.3.1.1.1.3.1.1.3 |
cbClTableTotalPacketsTotal Packets transmitted to this client.ro INTEGER .1.3.6.1.4.1.6247.3.1.1.1.3.1.1.4 |
cbClTableBytesInSecThe clients Rate in Bytes/Sec.ro INTEGER .1.3.6.1.4.1.6247.3.1.1.1.3.1.1.5 |
cbClTablePacketsDiscrThe Total Packets which were discarded to this clientro INTEGER .1.3.6.1.4.1.6247.3.1.1.1.3.1.1.6 |
cbClTableKBytesTxedThe Total KBytes transmitted to this client.ro INTEGER .1.3.6.1.4.1.6247.3.1.1.1.3.1.1.7 |
cbClTableResetReset the client statistics.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.1.3.1.1.8 |
cbConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2 |
cbNetworkParam OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.1 |
cbNetGatewayMngIPC&M IP Address.
Changing this parameter will affect after system reset.ro IpAddress .1.3.6.1.4.1.6247.3.1.1.2.1.1 |
cbNetGatewayMngSubnetMaskC&M subnet mask.
Changing this parameter will affect after system reset.ro IpAddress .1.3.6.1.4.1.6247.3.1.1.2.1.2 |
cbNetDefaultGatewayThe default gateway IP Address. The term gateway here, is reffering to another
station in the same LAN of the CATV-Gateway. All IP packets that the CATV-Gateway
is sending to the LAN (and not over the viedo) and their IP Address do not belong
to the CATV-Gateway local ring will be sent to this gateway station unless
cbNetDefaultGateway is 0.0.0.0
Changing this parameter will affect after system reset.rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.1.3 |
cbNetPromiscuousEnables/Disables Promiscuous Mode.
Changing this parameter will affect after system reset.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.1.4 |
cbNetUnregisteredUsersEnables/Disables Unregistered Users.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.1.5 |
cbNetMulticastEnables/Disables receive Multicast Packets.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.1.6 |
cbNetDualNICEnables/Disables Transportation NIC
Changing this parameter will affect after system reset.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.1.7 |
cbNetGatewayDataIPTransportation IP Address.
Changing this parameter will affect after system reset.rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.1.8 |
cbNetGatewayDataSubnetMaskTransportation subnet mask.
Changing this parameter will affect after system reset.rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.1.9 |
cbNetTelnetEnables/Disables the Telnet Serverrw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.1.10 |
cbNetFTPEnables/Disables the FTP Serverrw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.1.11 |
cbDVBOutputParam OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.2 |
cbDVBOutputBitRatePLL Frequencyrw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.2.1 |
cbDVBPATPAT Raterw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.2.2 |
cbDVBPMTPMT Raterw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.2.3 |
cbDVBFraming188/204 Framing.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.2.4 |
cbStuffingModeStuffing mode: either FF stuffing or Adaptation field stuffingrw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.2.5 |
cbMpeModeMPE mode: Packed MPE mode or Not packed MPE mode.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.2.6 |
cbCRCModeCRC typerw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.2.7 |
cbDVBClockPolarityDVB Clock Polarity.
(read only value - may be changed in CFG.INI only).ro Enumeration .1.3.6.1.4.1.6247.3.1.1.2.2.8 |
cbDVBAuxInputAux Input Enablerw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.2.9 |
cbDVBAuxNullPacketsAux Null Packetsrw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.2.10 |
cbDVBAuxInputTypeAux Input Typerw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.2.11 |
cbDVBLlcSnapEnable LLC-SNAP in MPErw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.2.12 |
cbGeneralParam OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.3 |
cbGatewayEnabledEnables/Disables all the Gateway operations.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.3.1 |
cbGatewaySWResetCAUTION: Setting this param to cbTrue cause a S/W reset of the gateway.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.3.2 |
cbTraceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.3.3 |
cbTraceMaskMask to select elements for trace.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.3.3.1 |
cbTraceLevelTrace level for elements specified by cbTraceMaskrw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.3.3.2 |
cbTraceOutputChannelTrace output channel.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.3.3.3 |
cbPktEncryptEnable/Disable encryption of the the transmitted packets.
If cbPktEncrypt==cbTrue, packets will be encrypted only if
cbClEncrEnable==cbTrue for that client.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.3.4 |
cbGatewayDescriptionA general description of this gateway. The description may
be changed as needed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.2.3.5 |
cbSWVersionTV Gateway Software Version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.2.3.6 |
cbApplicationFileNameTV Gateway Application Software File Name.
Changing this parameter will affect after system reset.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.2.3.7 |
cbDataMappingModeData Boradcast Mode - Encodding mode of data from network.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.3.8 |
cbMaxAllowableDelayThe Maximum allowable time (in mSec) which a packet can be
delayed in the gateway.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.3.9 |
cbQualityOfService OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.3.10 |
cbQOSModePermissive mode will allow transmit to users obove their maximum rate when when
band-width is available.
Restrictive mode will not transmit any data to users above their maximum rate even
if band-width is available.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.3.10.1 |
cbQOSActiveTurn on (cbTrue) or off (cbFalse) the Quality of Service mechanism.
When Quality of Service is turned off, the minimum CIR promised to
users is ignored and data is transffered to users in the order it
is received from the Ethernet by the gateway.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.3.10.2 |
cbFlushingFlushing packets on IDLErw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.3.11 |
cbFPGAFileNameA string that holds the MCS file name loaded to the Gateway's Encoder.
Changing this parameter will affect after system reset.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.2.3.13 |
cbGroupsTable OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.4 |
cbGrTableThis table contains the Groups definitions. SEQUENCE OF CbGroupsTableNode .1.3.6.1.4.1.6247.3.1.1.2.4.1 |
cbGroupsTableNodeInformation about a particular group. CbGroupsTableNode .1.3.6.1.4.1.6247.3.1.1.2.4.1.1 |
cbGrTableIndexGroup Index.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.4.1.1.1 |
cbGrTablePIDThe Group PID.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.4.1.1.2 |
cbGrTableQosModeThe Group Qos Mode.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.4.1.1.3 |
cbGrTableMinRateThe Group Minimum rate. This parameter affects only if QosMode=Globalrw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.4.1.1.4 |
cbGrTableMaxRateThe Group Maximum rate. This parameter affects only if QosMode=Globalrw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.4.1.1.5 |
cbConfigSTUTable OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.5 |
cbStaticUserTableThis table contains the all the static users. SEQUENCE OF CbStaticUserEntry .1.3.6.1.4.1.6247.3.1.1.2.5.1 |
cbStaticUserEntryInformation about a particular static user. CbStaticUserEntry .1.3.6.1.4.1.6247.3.1.1.2.5.1.1 |
cbStaticUserIPIP of static user.rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.5.1.1.1 |
cbStaticUserMaskThe static user mask.rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.5.1.1.2 |
cbStaticUserGroupThe static user's Group.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.5.1.1.3 |
cbStaticUserMACThe group in which the static user resides.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.2.5.1.1.4 |
cbStaticUserMinRateThe static user Minimum rate (CIR).rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.5.1.1.5 |
cbStaticUserMaxRateThe static user Maximum rate.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.5.1.1.6 |
cbConfigMulticastTable OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.6 |
cbMulticastTableThis table contains the all the multicasts. SEQUENCE OF CbMulticastEntry .1.3.6.1.4.1.6247.3.1.1.2.6.1 |
cbMulticastEntryInformation about a particular multicast. CbMulticastEntry .1.3.6.1.4.1.6247.3.1.1.2.6.1.1 |
cbMulticastIPIP of multicast.rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.6.1.1.1 |
cbMulticastGroupThe multicast's Group.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.6.1.1.2 |
cbMulticastSIDThe group in which the multicast resides.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.6.1.1.3 |
cbMulticastMinRateThe multicast Minimum rate (CIR).rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.6.1.1.4 |
cbMulticastMaxRateThe multicast Maximum rate.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.6.1.1.5 |
cbConfigClTable OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.7 |
cbCfgClTableThis table contains updated configuration of all clients known to the gateway. SEQUENCE OF CbCfgClTableNode .1.3.6.1.4.1.6247.3.1.1.2.7.1 |
cbCfgClTableNodeInformation about a particular client configuration. CbCfgClTableNode .1.3.6.1.4.1.6247.3.1.1.2.7.1.1 |
cbCfgClTableIPThe clients IP.ro IpAddress .1.3.6.1.4.1.6247.3.1.1.2.7.1.1.1 |
cbCfgClTableMaskThe clients IP Mask.ro IpAddress .1.3.6.1.4.1.6247.3.1.1.2.7.1.1.2 |
cbCfgClTableMACThe clients MAC Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.2.7.1.1.3 |
cbCfgClTableGroupThe clients Group.ro INTEGER .1.3.6.1.4.1.6247.3.1.1.2.7.1.1.4 |
cbCfgClTableByBy whom the client was added.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.2.7.1.1.5 |
cbCfgClTableMinRateThe clients Minimum rate (CIR).ro INTEGER .1.3.6.1.4.1.6247.3.1.1.2.7.1.1.6 |
cbCfgClTableMaxRateThe clients Maximum rate.ro INTEGER .1.3.6.1.4.1.6247.3.1.1.2.7.1.1.7 |
cbCfgClTableEncryptThe clients Encryption parameter True/False.ro Enumeration .1.3.6.1.4.1.6247.3.1.1.2.7.1.1.8 |
cbTimeDate OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.8 |
cbTimeA string in the form HH:MM:SS that represents
the gateway idea of the current time.
Single digits should be preceeded by 0.
Examples: 12:35:27 01:50:00 09:01:59rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.2.8.1 |
cbDateA string representing the gateway idea of the current date.
In order to set a different date, use the following format:
<Full Month Name> <1 or 2 Digits of Day of Month>,<4 Digits of Year>
Examples: September 1,1998
Januray 12, 2002rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.2.8.2 |
cbClientsInfoResetThis parameter is applicable only for clients that were NOT
added by the CCU.
The gateway will delete from its lists
clients information (statistics and encryption
parameters) for each client registered
in the system for more then cbTClientsInfoReset seconds.
cbTClientsInfoReset must be greater then 0.rw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.9 |
cbCCUParam OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.10 |
cbCCU1IP of CCU Server #1 (set to 0.0.0.0 to disable CCU #1)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.1 |
cbCCU2IP of CCU Server #2 (set to 0.0.0.0 to disable CCU #2)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.2 |
cbCCU3IP of CCU Server #3 (set to 0.0.0.0 to disable CCU #3)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.3 |
cbCCU4IP of CCU Server #4 (set to 0.0.0.0 to disable CCU #4)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.4 |
cbCCU5IP of CCU Server #5 (set to 0.0.0.0 to disable CCU #5)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.5 |
cbCCU6IP of CCU Server #6 (set to 0.0.0.0 to disable CCU #6)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.6 |
cbCCU7IP of CCU Server #7 (set to 0.0.0.0 to disable CCU #7)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.7 |
cbCCU8IP of CCU Server #8 (set to 0.0.0.0 to disable CCU #8)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.8 |
cbCCU9IP of CCU Server #9 (set to 0.0.0.0 to disable CCU #9)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.9 |
cbCCU10IP of CCU Server #10 (set to 0.0.0.0 to disable CCU #10)rw IpAddress .1.3.6.1.4.1.6247.3.1.1.2.10.10 |
cbHASParam OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.2.11 |
cbHasEnableEnables/Disables High Availability Mode.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.2.11.1 |
cbHasCpuMaximum CPUrw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.11.2 |
cbHasMemoryMaximum Memory Usagerw INTEGER .1.3.6.1.4.1.6247.3.1.1.2.11.3 |
cbDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.3 |
cbDiagTestTx OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.3.1 |
cbDiagTestTxParam OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.3.1.1 |
cbTestTxDestIPTest Transfer Packet IDrw IpAddress .1.3.6.1.4.1.6247.3.1.1.3.1.1.1 |
cbTestTxTypeREAD/WRITE
Test Transfer Type:
cbTestTypeOnePacket - one packet,
cbTestTypeLowSpeedCont - Low Speed Continuous.
cbTestTypeHighSpeedCont - High Speed Continuous.rw Enumeration .1.3.6.1.4.1.6247.3.1.1.3.1.1.2 |
cbDiagTestTxActiveSet to 0 in order to stop Test Transfer.
Set to non-0 in order to activate it.
(in case cbTestTxType = 1, set to 0 and to non-zero
in order to re-send the single test packet)rw Enumeration .1.3.6.1.4.1.6247.3.1.1.3.1.2 |
cbSWDownload OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.4 |
cbSWServerIPThe TFTP server IP address.
The S/W file will be TFTPed from this station.
Use 0.0.0.0 to load a different local file (without TFTP).rw IpAddress .1.3.6.1.4.1.6247.3.1.1.4.1 |
cbAppDownload OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.4.2 |
cbSWSourceFileNameThe software file name and its optional path (relative to the TFTP server
root definition) to be downloaded from the server.
Example: catvgw.datrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.4.2.1 |
cbSWTargetFileNameThe S/W file name (without path) on the Gateway.
Example: ram.abs
WARNING: cbApplicationFileName (under cbGeneralParam) is the name of
the running S/W. If cbSWTargetFileName is different from
cbApplicationFileName, it will be just downloaded to the Gateway and
not used until cbApplicationFileName will be changed (in CFG.INI) to
be equal to cbSWTargetFileName.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.4.2.2 |
cbSWDownloadStartSet cbSWDownloadStart to cbTrue in order to start the S/W download process.
Set cbSWDownloadStart to cbFalse to interrupt (and stop) S/W download
in progress (when cbSWDownloadStatus = cbDownloadInProgress).rw Enumeration .1.3.6.1.4.1.6247.3.1.1.4.2.3 |
cbSWDownloadStatusStatus of SW Download:
cbIdle - Download has not started yet or has comleted and gateway already restarted with new version (not an error).
cbDownloadInProgress - Download is currently in progrees (not an error).
cbERRORTFTPServernotFound - Cannot find a TFTP server in the specified IP address - check and correct cbSWServerIP.
cbERRORFileNotFound - Cannot find the specified file - check and correct cbSWFileName.
cbERRORNotaSWFile - The specified file is not a SW file - check and correct cbSWFileName.
cbERRORBadChecksum - Bad checksum - try to download again.
cbERRORCommunicationFailed - Communication with server failed - try to download again.
cbDownloadAborted - Download aborted by SNMP manager (cbSWDownloadStart was set to cbFalse during download).ro Enumeration .1.3.6.1.4.1.6247.3.1.1.4.2.4 |
cbFPGADownload OBJECT IDENTIFIER .1.3.6.1.4.1.6247.3.1.1.4.3 |
cbFPGASourceFileNameThe FPGA file name and its optional path (relative to the TFTP server
root definition) to be downloaded from the server.
Example: FPGA.DATrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.4.3.1 |
cbFPGATargetFileNameThe FPGA file name (without path) on the Gateway.
Example: FPGA.DATrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.3.1.1.4.3.2 |
cbFPGADownloadStartSet cbFPGADownloadStart to cbTrue in order to start the FPGA download process.
Set cbFPGADownloadStart to cbFalse to interrupt (and stop) FPGA download
in progress (when cbFPGADownloadStatus = cbDownloadInProgress).rw Enumeration .1.3.6.1.4.1.6247.3.1.1.4.3.3 |
cbFPGADownloadStatusStatus of FPGA Download:
cbIdle - Download has not started yet or has comleted and gateway already restarted with new version (not an error).
cbDownloadInProgress - Download is currently in progrees (not an error).
cbERRORTFTPServernotFound - Cannot find a TFTP server in the specified IP address - check and correct cbSWServerIP.
cbERRORFileNotFound - Cannot find the specified file - check and correct cbFPGAFileName.
cbERRORNotaSWFile - The specified file is not a SW file - check and correct cbFPGAFileName.
cbERRORBadChecksum - Bad checksum - try to download again.
cbERRORCommunicationFailed - Communication with server failed - try to download again.
cbDownloadAborted - Download aborted by SNMP manager (cbFPGADownloadStart was set to cbFalse during download).ro Enumeration .1.3.6.1.4.1.6247.3.1.1.4.3.4 |