CSAT-5060
AI MIB Summary
The CSAT-5060 MIB module provides management interfaces for the Cisco CSAT-5060 Transceiver, enabling monitoring of optical transceiver parameters such as temperature, voltage, bias current, and optical power levels. It facilitates real-time health assessment and fault detection for the physical layer components of the associated Cisco router or switch hardware.
Module Identity for CSAT-5060 Transceiver.
Main OID:
csat5060.1.3.6.1.4.1.6247.29
49
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
csat5060Module Identity for CSAT-5060 Transceiver. MODULE-IDENTITY .1.3.6.1.4.1.6247.29 |
csat5060Objects OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.1 |
csat5060SelectCSAT Select. Use option csat1 for StandAlone unit.rw Enumeration .1.3.6.1.4.1.6247.29.1.1 |
csat5060SystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.1.2 |
csat5060ModelNumberSoftwareVerCSAT Model Number, Software Version. (RET?)ro OCTET STRING .1.3.6.1.4.1.6247.29.1.2.1 |
csat5060UnitSerialNumberCSAT Unit Serial Number. (RSN?)ro OCTET STRING .1.3.6.1.4.1.6247.29.1.2.2 |
csat5060DeviceTimeCSAT Unit Time. (TIM?, TIM=) A time in the form hh:mm:ss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59)rw OCTET STRING .1.3.6.1.4.1.6247.29.1.2.3 |
csat5060DeviceDateCSAT Unit Date. (DAY?, DAY=) A date in the form dd/mm/yy, where dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99)rw OCTET STRING .1.3.6.1.4.1.6247.29.1.2.4 |
csat5060CircuitIDCSAT Circuit ID. (CID?, CID=)rw OCTET STRING .1.3.6.1.4.1.6247.29.1.2.5 |
csat5060UnitParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.1.3 |
csat5060UnitMuteModeCSAT Unit Mute Mode. (MUT?, MUT=)rw Enumeration .1.3.6.1.4.1.6247.29.1.3.1 |
csat5060UnitColdStartCSAT Unit Cold Start. (CLD?, CLD=)rw Enumeration .1.3.6.1.4.1.6247.29.1.3.2 |
csat5060UnitAutoFaultRecoveryCSAT Auto Fault Recovery. (AFR?, AFR=)rw Enumeration .1.3.6.1.4.1.6247.29.1.3.3 |
csat5060UnitExtRefFaultLogicCSAT External Reference Fault Logic. (XRF?, XRF=)rw Enumeration .1.3.6.1.4.1.6247.29.1.3.4 |
csat5060UnitRefOscAdjustCSAT Reference Oscillator Adjust. (REF?, REF=)rw INTEGER .1.3.6.1.4.1.6247.29.1.3.5 |
csat5060UnitLNACurrentSourceCSAT LNA Current Source. (LCS?, LCS=)rw Enumeration .1.3.6.1.4.1.6247.29.1.3.6 |
csat5060UnitLNACurrentWindowCSAT LNA Current Window. (LCW?, LCW=)rw INTEGER (20..50 | 99) .1.3.6.1.4.1.6247.29.1.3.7 |
csat5060UnitLNAFaultLogicCSAT LNA Fault Logic. (LFL?, LFL=)rw Enumeration .1.3.6.1.4.1.6247.29.1.3.8 |
csat5060UnitRedundancyModeCSAT Redundancy Mode. Only Supported by ONLINE Unit. (RAM?, RAM=)rw Enumeration .1.3.6.1.4.1.6247.29.1.3.9 |
csat5060UnitRedForceSwitchCSAT Force Redundancy Switch. Write-ONLY. (RTG=)rw Enumeration .1.3.6.1.4.1.6247.29.1.3.10 |
csat5060TxParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.1.4 |
csat5060TxFrequencyCSAT TX Frequency in KHz. Frequency divisible by 1MHz or 2.5MHz is allowed. (UFQ?, UFQ=)rw INTEGER .1.3.6.1.4.1.6247.29.1.4.1 |
csat5060TxAttenuationCSAT TX Attenuation. Value Multiplied by 100. (UAT?, UAT=)rw INTEGER .1.3.6.1.4.1.6247.29.1.4.2 |
csat5060TxAmplifierCSAT TX Amplifier. (AMP?, AMP=)rw Enumeration .1.3.6.1.4.1.6247.29.1.4.3 |
csat5060TxMuteCSAT TX Mute. (UMU?, UMU=)rw Enumeration .1.3.6.1.4.1.6247.29.1.4.4 |
csat5060TxSlopeModeCSAT TX Slope Mode. (USM?, USM=)rw Enumeration .1.3.6.1.4.1.6247.29.1.4.5 |
csat5060TxSlopeValueCSAT TX Slope Value. Value Multiplied by 10. (USA?, USA=)rw INTEGER .1.3.6.1.4.1.6247.29.1.4.6 |
csat5060TxGainOffsetCSAT TX Gain Offset. Value Multiplied by 100. (UGO?, UGO=)rw INTEGER (-400..0) .1.3.6.1.4.1.6247.29.1.4.7 |
csat5060RxParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.1.5 |
csat5060RxFrequencyCSAT RX Frequency in KHz. Frequency divisible by 1MHz or 2.5MHz is allowed. (DFQ?, DFQ=)rw INTEGER .1.3.6.1.4.1.6247.29.1.5.1 |
csat5060RxAttenuationCSAT RX Attenuation. Value Multiplied by 100. (DAT?, DAT=)rw INTEGER .1.3.6.1.4.1.6247.29.1.5.2 |
csat5060RxMuteCSAT RX Mute. (DMU?, DMU=)rw Enumeration .1.3.6.1.4.1.6247.29.1.5.3 |
csat5060RxSlopeModeCSAT RX Slope Mode. (DSM?, DSM=)rw Enumeration .1.3.6.1.4.1.6247.29.1.5.4 |
csat5060RxSlopeValueCSAT RX Slope Value. Value Multiplied by 10. (DSA?, DSA=)rw INTEGER .1.3.6.1.4.1.6247.29.1.5.5 |
csat5060RxGainOffsetCSAT RX Gain Offset. Value Multiplied by 100. (DGO?, DGO=)rw INTEGER (-400..0) .1.3.6.1.4.1.6247.29.1.5.6 |
csat5060UnitStatus OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.1.6 |
csat5060OnlineStateCSAT Online Status. (ONL?)ro Enumeration .1.3.6.1.4.1.6247.29.1.6.1 |
csat5060MaintenanceParametersCSAT Concise Maintenance Parameters. (CMS?) CMS=aaa.abbb.bccc.cddd.deee.efff.fggg.ghhh.hiii.ijjj.jkkk.klll.lmmm.mnnn.nooo.oppp.p where: aaa.a = 24V Power Supply bbb.b = 20V Power Supply ccc.c = 12V Power Supply ddd.d = 10V Power Supply eee.e = +5V Power Supply fff.f = -5V Power Supply ggg.g = TX Synthesizer Tuning Voltage hhh.h = TX IFLO Tuning Voltage iii.i = RX Synthesizer Tuning Voltage jjj.j = RX IFLO Tuning Voltage kkk.k = Reference Tuning Voltage lll.l = LNA Current in milliamps mmm.m = Fan Current in milliamps nnn.n = Up Conv Heat Sink Temperature ooo.o = RF Output Power in dB ppp.p = Down Converter Temperature Note: Value is xxx.x if not availablero OCTET STRING .1.3.6.1.4.1.6247.29.1.6.2 |
csat5060UnitFaultsCSAT Concise Alarm Status. (CAS?) The return integer value in binary represents CAS? response string. CAS=abcdefghijklmnopqrs, where: a thru s = 0 or 1, 0 = OK 1 = FT a = 24V Power Supply Alarm b = 20V Power Supply Alarm c = 12V Power Supply Alarm d = 10V Power Supply Alarm e = +5V Power Supply Alarm f = -5V Power Supply Alarm g = TX Synthesizer Lock Detect Alarm h = TX IFLO Lock Detect Alarm I = RX Synthesizer Lock Detect Alarm j = RX IFLO Lock Detect Alarm k = Reference Lock Detect Alarm l = LNA Current Alarm m = Fan Current Alarm n = Temperature Alarm o = HPA Thermal Shutdown Alarm p = Internal IIC-bus Alarm q = EEPROM checksum Alarm r = NVRAM/RTC Low Battery Alarm s = Redundancy switch alarm For Example, return value 128 (in decimal) = 0b0000000000010000000, where l position is 1 means there is a Rx Synthesizer Lock Detect Alarm, other bits are 0s meas no other alarms.ro INTEGER .1.3.6.1.4.1.6247.29.1.6.3 |
csat5060Logs OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.1.7 |
csat5060NumberUnreadEventsCSAT Number of Unread Events. (TNA?)ro INTEGER .1.3.6.1.4.1.6247.29.1.7.1 |
csat5060RetrieveNext5EventsCSAT Retrieve Next 5 Events. (LNA?)ro OCTET STRING .1.3.6.1.4.1.6247.29.1.7.2 |
csat5060ClearEventsLogCSAT Clear Events Log. Write-ONLY. (CAA=)rw Enumeration .1.3.6.1.4.1.6247.29.1.7.3 |
csat5060InitializeEventsPointerCSAT Initialize Events Pointer. Write-ONLY. (IAP=)rw Enumeration .1.3.6.1.4.1.6247.29.1.7.4 |
csat5060Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.2 |
csat5060Groups OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.2.1 |
csat5060ObjectsGroupCSAT-5060 Objects Group. Unknown .1.3.6.1.4.1.6247.29.2.1.1 |
csat5060Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.6247.29.2.2 |
csat5060ComplianceCSAT-5060 Compliance. Unknown .1.3.6.1.4.1.6247.29.2.2.1 |
More MIBs from Comtech EF Data
Browse all Comtech EF DataMIBs →CDD-564
The CDD-564 MIB module enables monitoring and management of CDD-564 satellite demodulator hardware, specifically tracking RF signal parameters, demodulation status, error rates, and link health metrics. This module facilitates the collection of performance counters and alarm states required for maintaining satellite communication link integrity and troubleshooting demodulation failures.
269 objects→
CDMIPController
SNMP MIB module
260 objects→
EFDATA-MIB
Standard SNMP MIB module defining data structures for EFDATA-MIB.
155 objects→
CDM-570
SNMP MIB module
155 objects→
EFDATA-SPECTRACAST-DR5000-MIB
Standard SNMP MIB module defining data structures for EFDATA-SPECTRACAST-DR5000-MIB.
83 objects→
CDM-570L
The CDM-570L MIB module provides management and monitoring capabilities for CDM-570 L-Band and IF-Band satellite modems, exposing performance metrics such as signal strength, bit error rates, modem status, and interface statistics. This module enables network administrators to track link quality, diagnose transmission errors, and manage configuration parameters specific to these satellite communication devices.
47 objects→