CDD-564
Module for CDD-564 Satellite Demod
Main OID:
cdd564.1.3.6.1.4.1.6247.25
269
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
269 total| Object Name |
|---|
cdd564Module for CDD-564 Satellite Demod MODULE-IDENTITY .1.3.6.1.4.1.6247.25 |
cdd564Objects OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1 |
cdd564Administration OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.1 |
cdd564AccessLists OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.1.1 |
cdd564AccessListTableThe table for the access list. SEQUENCE OF Cdd564AccessListEntry .1.3.6.1.4.1.6247.25.1.1.1.1 |
cdd564AccessListEntryThe entry for the access list table. Cdd564AccessListEntry .1.3.6.1.4.1.6247.25.1.1.1.1.1 |
cdd564AccessListIndexThe index for the access list from 1..4.ro INTEGER .1.3.6.1.4.1.6247.25.1.1.1.1.1.1 |
cdd564AccessIPAddressThe IP addresses that can access the unit. The value of 0.0.0.0 means not defined.rw IpAddress .1.3.6.1.4.1.6247.25.1.1.1.1.1.2 |
cdd564AccessSubnetMaskLengthThe subnet mask length of the IP address for the access list. Subnet mask can be from 8..32. The value of 0 means not defined.rw INTEGER (0 | 8..32) .1.3.6.1.4.1.6247.25.1.1.1.1.1.3 |
cdd564AccessListEnforcementEnable or disable enforcement of the the access list. Note: Be sure that you have added the SNMP browser's/manager's IP Address to the access list before enabling access list filtering. Otherwise, the SNMP browser/manager will no longer be able to gain access to the unit.rw Enumeration .1.3.6.1.4.1.6247.25.1.1.1.2 |
cdd564Features OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.1.2 |
cdd564PingReplyEnable or disable ping reply from unit.rw Enumeration .1.3.6.1.4.1.6247.25.1.1.2.1 |
cdd564TelnetEnable or disable telnet access to unit.rw Enumeration .1.3.6.1.4.1.6247.25.1.1.2.2 |
cdd564IGMPEnable or disable the Internet Group Management Protocol (IGMP).rw Enumeration .1.3.6.1.4.1.6247.25.1.1.2.3 |
cdd564ForwardMulticastsEnable or disable forwarding all multicasts received from the Satellite interface to the Ethernet interface.rw Enumeration .1.3.6.1.4.1.6247.25.1.1.2.4 |
cdd564FeaturesTableThe table (per demodulator) of FAST Features. SEQUENCE OF Cdd564FeaturesEntry .1.3.6.1.4.1.6247.25.1.1.2.5 |
cdd564FeaturesEntryThe entry for the FAST Feature (per demod) table. Cdd564FeaturesEntry .1.3.6.1.4.1.6247.25.1.1.2.5.1 |
cdd564FeatureIndexThe index for the FAST Feature (per demod) table.ro INTEGER .1.3.6.1.4.1.6247.25.1.1.2.5.1.1 |
cdd564HeaderCompressionAvailability of header compression is based on FAST features Note: To use header compression, it must be FAST available and enabled on both the transmit and receive sides.rw Enumeration .1.3.6.1.4.1.6247.25.1.1.2.5.1.2 |
cdd564WorkingModeConfigure the system's working mode. The CDM-IP can operate in any of these modes. 1. Router - Small Network Mode - The system functions as router and uses the route table to determine how to forward packets in a small network HDLC address mode. The HDLC packet uses a 1 byte HDLC address. The valid values are from 1 to 254 (0x1 - 0xFE). 2. Router - Small Network Mode - The system functions as router and uses the route table to determine how to forward packets in a large network HDLC address mode. The HDLC packet uses a 2- byte HDLC address. The valid values are from 1 to 32766 (0x1 - 0x7FFE). 3. Router - Point To Point Mode - The system functions as router but does not use HDLC addresses. 4. Router - Vipersat Mode - The system functions as router and is configured to work in a Vipersat network. *** IMPORTANT NOTE *** Changing Working mode requires the system to reboot. System configuration is saved before rebooting. Please make sure you are setting the correct value.rw Enumeration .1.3.6.1.4.1.6247.25.1.1.2.6 |
cdd5643xDESEncryption OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.1.3 |
cdd5643xDESRxKeyTableThe table (one row per demod) for triple DES (3xDES) receive decrypt keys. SEQUENCE OF Cdd5643xDESRxKeyEntry .1.3.6.1.4.1.6247.25.1.1.3.1 |
cdd5643xDESRxKeyEntryThe entry (per demod) of the 3xDES receive decrypt key table. Cdd5643xDESRxKeyEntry .1.3.6.1.4.1.6247.25.1.1.3.1.1 |
cdd5643xDESRxKeyIndexThe index (per demod) of the 3xDES receive decrypt key table.ro INTEGER .1.3.6.1.4.1.6247.25.1.1.3.1.1.1 |
cdd5643xDESRxKey1The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).rw DisplayString .1.3.6.1.4.1.6247.25.1.1.3.1.1.2 |
cdd5643xDESRxKey2The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).rw DisplayString .1.3.6.1.4.1.6247.25.1.1.3.1.1.3 |
cdd5643xDESRxKey3The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).rw DisplayString .1.3.6.1.4.1.6247.25.1.1.3.1.1.4 |
cdd5643xDESRxKey4The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).rw DisplayString .1.3.6.1.4.1.6247.25.1.1.3.1.1.5 |
cdd5643xDESRxKey5The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).rw DisplayString .1.3.6.1.4.1.6247.25.1.1.3.1.1.6 |
cdd5643xDESRxKey6The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).rw DisplayString .1.3.6.1.4.1.6247.25.1.1.3.1.1.7 |
cdd5643xDESRxKey7The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).rw DisplayString .1.3.6.1.4.1.6247.25.1.1.3.1.1.8 |
cdd5643xDESRxKey8The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters).rw DisplayString .1.3.6.1.4.1.6247.25.1.1.3.1.1.9 |
cdd564SMTP OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.1.4 |
cdd564SMTPServerIPAddressThe IP address of the SMTP server for sending problem reports. This IP adderess should correspond to a local Mail server.rw IpAddress .1.3.6.1.4.1.6247.25.1.1.4.1 |
cdd564SMTPDomainThe SMTP Domain for sending problem reports. This value should be comtechefdata.com.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.1.4.2 |
cdd564SMTPUserNameThe user name for sending problem reports. This value should be cdmipsupport.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.1.4.3 |
cdd564SNMP OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.1.5 |
cdd564SNMPTrapDestinationIPAddressThe IP address were SNMP notifications (traps) are to be sent. This IP address should correspond to a SNMP manager or browser.rw IpAddress .1.3.6.1.4.1.6247.25.1.1.5.1 |
cdd564SNMPTrapCommunityThe community that will be included in SNMP notifications (traps) that are sent from unit.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.1.5.2 |
cdd564SNMPTrapVersionThe SNMP version that will be used when sending traps from the unit. SNMPv1 will send V1 traps. SNMPv2 will send V2 notifications.rw Enumeration .1.3.6.1.4.1.6247.25.1.1.5.3 |
cdd564SNMPAuthenticationFailureCommunityThe community that did not match valid SNMP Read or Write community. Note: This is ONLY used in the Authentication Failure trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.1.5.4 |
cdd564SNMPAuthenticationFailureIPAddressThe IP address that did not send a valid SNMP Read or Write community. Note: This is ONLY used in the Authentication Failure trap.ro IpAddress .1.3.6.1.4.1.6247.25.1.1.5.5 |
cdd564SNMPTrapDestinationIPAddress2The secondary IP address were SNMP notifications (traps) are to be sent. This IP address should correspond to a secondary SNMP manager or browser.rw IpAddress .1.3.6.1.4.1.6247.25.1.1.5.6 |
cdd564Interfaces OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.2 |
cdd564EthernetInterface OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.2.1 |
cdd564MACAddressThe MAC address assigned to the Ethernet interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.2.1.1 |
cdd564EthernetSpeedThe speed of the Ethernet interface.rw Enumeration .1.3.6.1.4.1.6247.25.1.2.1.2 |
cdd564IPAddressThe IP address assigned to the Ethernet interface.rw IpAddress .1.3.6.1.4.1.6247.25.1.2.1.3 |
cdd564SubnetMaskLenThe subnet mask length of the IP address.rw INTEGER .1.3.6.1.4.1.6247.25.1.2.1.4 |
cdd564DemodulatorInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.2.2 |
cdd564HDLCAddressModeThe size of HDLC address used for sending packets over satellite interface can range from 0 - 2 bytes. The satellite interface will operate in one of the following modes: 1.Small Network mode - The packet uses a 1 byte HDLC address. The valid values are from 1 to 254 (0x1 - 0xFE). 2.Large Network mode - The packet uses a 2 byte HDLC address. The valid values are from 1 to 32766 (0x1 - 0x7FFE). 3. Point To Point mode - The packet does not use a HDLC address. An HDLC address cannot have 0x00 or 0xFF in least Significant Byte. i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses.ro Enumeration .1.3.6.1.4.1.6247.25.1.2.2.2 |
cdd564HDLCAddressTableThe table for the Demodulator HDLC Addresses. SEQUENCE OF Cdd564HDLCAddressEntry .1.3.6.1.4.1.6247.25.1.2.2.3 |
cdd564HDLCAddressEntryThe entry of the HDLC Address table. Cdd564HDLCAddressEntry .1.3.6.1.4.1.6247.25.1.2.2.3.1 |
cdd564HDLCAddressIndexThe Demod number corresponding to 1 of 4 demodulators.ro INTEGER .1.3.6.1.4.1.6247.25.1.2.2.3.1.1 |
cdd564HDLCAddress1The HDLC address #1 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). 3. Point to point, not used. 4. EasyConnect, not used. HDLC address can not have 0x00 or 0xFF in least significant byte, i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. Deletion: To delete the HDLC address, set it to zero.rw INTEGER (0 | 1..32766) .1.3.6.1.4.1.6247.25.1.2.2.3.1.3 |
cdd564HDLCAddress2The HDLC address #2 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). 3. Point to point, not used. 4. EasyConnect, not used. HDLC address can not have 0x00 or 0xFF in least significant byte, i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. Deletion: To delete the HDLC address, set it to zero.rw INTEGER (0 | 1..32766) .1.3.6.1.4.1.6247.25.1.2.2.3.1.4 |
cdd564HDLCAddress3The HDLC address #3 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). 3. Point to point, not used. 4. EasyConnect, not used. HDLC address can not have 0x00 or 0xFF in least significant byte, i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. Deletion: To delete the HDLC address, set it to zero.rw INTEGER (0 | 1..32766) .1.3.6.1.4.1.6247.25.1.2.2.3.1.5 |
cdd564HDLCAddress4The HDLC address #4 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). 3. Point to point, not used. 4. EasyConnect, not used. HDLC address can not have 0x00 or 0xFF in least significant byte, i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. Deletion: To delete the HDLC address, set it to zero.rw INTEGER (0 | 1..32766) .1.3.6.1.4.1.6247.25.1.2.2.3.1.6 |
cdd564Routes OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.3 |
cdd564RouteTableThe route table used in Router mode. SEQUENCE OF Cdd564RouteEntry .1.3.6.1.4.1.6247.25.1.3.1 |
cdd564RouteEntryThe entry for the the route table. Cdd564RouteEntry .1.3.6.1.4.1.6247.25.1.3.1.1 |
cdd564RouteIndexThe index for the route table.rw INTEGER .1.3.6.1.4.1.6247.25.1.3.1.1.1 |
cdd564RouteNameThe name of the route. All routes must be named.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.3.1.1.2 |
cdd564RouteDestAddressThe destination IP address for the route.rw IpAddress .1.3.6.1.4.1.6247.25.1.3.1.1.3 |
cdd564RouteDestMaskLenThe subnet mask lenght for the destination IP address.rw INTEGER .1.3.6.1.4.1.6247.25.1.3.1.1.4 |
cdd564RouteNextHopAddressThe next hop IP address for the route.rw IpAddress .1.3.6.1.4.1.6247.25.1.3.1.1.5 |
cdd564RouteMulticastIf the route is a multicast, packets can be: 1. forwarded 2. filtered If the route is unicast, the field is not applicable.rw Enumeration .1.3.6.1.4.1.6247.25.1.3.1.1.6 |
cdd564RouteInterfaceRoutes are destined to the Ethernet interface.rw Enumeration .1.3.6.1.4.1.6247.25.1.3.1.1.7 |
cdd564RouteRowStatusThis value is used for status of route: active(1) - The route is active. These values are used to create or delete route: createAndGo(4) - The route is to be created. destroy(6) - The route to be deleted.rw Enumeration .1.3.6.1.4.1.6247.25.1.3.1.1.8 |
cdd564Protocols OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.4 |
cdd564IGMPConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.4.1 |
cdd564IGMPServer OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.4.1.1 |
cdd564IGMPQueryPeriodThe IGMP query period, in seconds.rw INTEGER .1.3.6.1.4.1.6247.25.1.4.1.1.1 |
cdd564IGMPMaxResponseTimeThe IGMP maximum response time, in seconds.rw INTEGER .1.3.6.1.4.1.6247.25.1.4.1.1.2 |
cdd564IGMPMaxMissBeforeLeavingGroupThe maximum number of missed responses before leaving the IGMP group.rw INTEGER .1.3.6.1.4.1.6247.25.1.4.1.1.3 |
cdd564IGMPTableThe table for IGMP groups. SEQUENCE OF Cdd564IGMPEntry .1.3.6.1.4.1.6247.25.1.4.1.3 |
cdd564IGMPEntryThe entry for the IGMP group table. Cdd564IGMPEntry .1.3.6.1.4.1.6247.25.1.4.1.3.1 |
cdd564IGMPIndexThe index for the IGMP group table.ro INTEGER .1.3.6.1.4.1.6247.25.1.4.1.3.1.1 |
cdd564IGMPTTLThe TTL for the multicast group.ro INTEGER .1.3.6.1.4.1.6247.25.1.4.1.3.1.2 |
cdd564IGMPClientStateThe state for the multicast group.ro Enumeration .1.3.6.1.4.1.6247.25.1.4.1.3.1.3 |
cdd564IGMPSrcThe interface from which the multicast group was received.ro Enumeration .1.3.6.1.4.1.6247.25.1.4.1.3.1.4 |
cdd564IGMPGroupIPAddressThe multicast group address.ro IpAddress .1.3.6.1.4.1.6247.25.1.4.1.3.1.5 |
cdd564Maint OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.5 |
cdd564UnitInformation OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.5.1 |
cdd564BootInfoThe version and revision information for the boot application.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.5.1.1 |
cdd564Bulk1InfoThe version and revision information for the bulk application in image 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.5.1.2 |
cdd564Bulk2InfoThe version and revision information for the bulk application in image 2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.5.1.3 |
cdd564FPGARx1InfoThe version and revision information for the Rx FPGA in image 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.5.1.4 |
cdd564FPGARx2InfoThe version and revision information for the Rx FPGA in image 2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.5.1.5 |
cdd564BulkDatabase OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.5.2 |
cdd564BootImageSpecifies which image will be booted: latest - boots the latest image determined by the most recent build date image 1 - boots image from bulk #1 image 2 - boots image from bulk #2rw Enumeration .1.3.6.1.4.1.6247.25.1.5.2.1 |
cdd564UpgradeImageSpecifies which image will be overwritten during an upgrade: oldest - overwrites the oldest image determined by build date. image 1 - overwrites image 1 image 2 - overwrites image 2 NOTE: Set this value before performing an upgrade.rw Enumeration .1.3.6.1.4.1.6247.25.1.5.2.2 |
cdd564ParamDatabase OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.5.3 |
cdd564ParamImageSpecifies if configuration should be read from: paramFile - parameter file stored in flash factoryDefaults - the factory defaultsrw Enumeration .1.3.6.1.4.1.6247.25.1.5.3.1 |
cdd564SaveParamToFlashThis is a SET command to save the configuration to the parameter file in flash.rw Enumeration .1.3.6.1.4.1.6247.25.1.5.3.2 |
cdd564ReloadParamFromFlashThis is a SET command to reload the configuration from the parameter file in flash.rw Enumeration .1.3.6.1.4.1.6247.25.1.5.3.3 |
cdd564RestoreFactoryDefaultsThis is a SET command that restore the configuration to the factory defaults. *** Imporant *** Setting this command ERASES the parameter file in flash.rw Enumeration .1.3.6.1.4.1.6247.25.1.5.3.4 |
cdd564RebootUnit OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.5.4 |
cdd564RebootThe is a SET command that will reboot the unit. *** Important *** The command will reboot the unit without saving the configuration to the parameter file in flash.rw Enumeration .1.3.6.1.4.1.6247.25.1.5.4.1 |
cdd564Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6 |
cdd564IPRoutingStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.1 |
cdd564IPRoutingEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.1.1 |
cdd564TotalPacketsToEthernetThe total number of IP packets routed to the Ethernet interface.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.1.1 |
cdd564TotalUnicastsToEthernetThe total number of Unicast packets routed to the Ethernet interface.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.1.2 |
cdd564TotalMulticastsToEthernetThe total number of Multicast packets routed to the Ethernet interface.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.1.3 |
cdd564TotalBroadcastsToEthernetThe total number of Broadcast packets routed to the Ethernet interface.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.1.4 |
cdd564TotalPacketsFromEthernetThe total number of IP packets received from the Ethernet interface.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.1.5 |
cdd564IPRoutingSatellite OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.1.2 |
cdd564TotalPacketsFromSatelliteThe total number of IP packets received from the satellite interfaces.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.2.1 |
cdd564IPRoutingEndstation OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.1.3 |
cdd564TotalPacketsFromEndstationThe total number of packets received from the Endstation to be sent out one of the interfaces.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.3.1 |
cdd564TotalPacketsToEndstationThe total number of packets sent to the Endstation from one of the interfaces.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.3.2 |
cdd564IPRoutingMisc OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.1.4 |
cdd564IGMPPacketsReceivedThe total number of IGMP packets received by the endstation.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.4.1 |
cdd564IPOptionPacketsReceivedThe total number of packets received with IP Options in the IP header.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.4.2 |
cdd564IPRoutingDropped OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.1.5 |
cdd564TotalDroppedPacketsThe total number of packets dropped by the router.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.1 |
cdd564DroppedPacketsBadIPHeaderThe total number of packets dropped by the router because of a bad checksum in the IP header.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.2 |
cdd564DroppedPacketsBadBufferLengthThe total number of packets dropped by the router because of a bad packet buffer length.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.3 |
cdd564DroppedPacketsBadIPVersionThe total number of packets dropped by the router because of the packet is not IPv4. Note: IPv6 packets are not support by the router.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.4 |
cdd564DroppedPacketsTTLExpiredThe total number of packets dropped by the router because the TTL (time to live) in the IP header had expired (i.e. reached zero).ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.5 |
cdd564DroppedPacketsNoRouteThe total number of packets dropped by the router because the packet did not match any route in the route table and could not be forwarded.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.6 |
cdd564DroppedPacketsNoARPEntryThe total number of packets dropped by the router because the ARP table did not have an ARP entry for the packet's next hop.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.7 |
cdd564DroppedPacketsFilteredMulticastThe total number of multicast packets dropped by the router because the multicast address is not being forwarded.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.8 |
cdd564DroppedPacketsMulticastDisableGroupThe total number of multicast packets dropped by the router because the multicast group is not being forwarded.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.9 |
cdd564DroppedPacketsFilteredThe total number of packets dropped by the router for the following reasons: 1. Boot 2. Flow Descriptor 3. Unknown Reason Code 4. Flow Correlator 5. Management Path 6. Ping 7. Access Control 8. Vipersat Multicommand 9. Vipersat Unicommand 10. Codeload 11. Multicast 12. Bad Packet 13. Route 14. Bad Header Len 15. Bad Data Ptr 16. MAC Split Err 17. L3Type Err 18. Local Destination 19. ICMP Filter 20. Port Err 21. Per port route rulero Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.10 |
cdd564DroppedPacketsRouterQueueFullThe total number of packets dropped by the router because the router queue is full.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.1.5.11 |
cdd564IPRoutingClearCountersThis is a SET command to clear the IP routing counters.rw Enumeration .1.3.6.1.4.1.6247.25.1.6.1.6 |
cdd564EthernetStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.2 |
cdd564EthernetTxStats OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.2.1 |
cdd564EtherTxGoodFramesThe number of transmitted good frames from the Ethernet interface.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.1 |
cdd564EtherTxMaxCollisionsThe number of frames that were NOT transmitted because they encountered the maximum configured collisions. This counter should only increment when network is heavily saturated with traffic.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.2 |
cdd564EtherTxLateCollisionsThe number of frames that were NOT transmitted because they encountered collision outside the normal collision window.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.3 |
cdd564EtherTxDMAUnderrunThe number of frames that were either NOT transmitted or retransmitted due to Transmit DMA underrun. Underruns occur due to lack of PCI bandwidth resulting in the internal transmit FIFO running dry during the transmission of a frame.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.4 |
cdd564EtherTxLostCarrierSenseThe number of frames transmitted by the device despite the fact that it detected the de-assertion of Transmit Lost Carrier Sense (CRS) during the transmission.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.5 |
cdd564EtherTxDeferredThe number of frames deferred before transmission due to activity on the link.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.6 |
cdd564EtherTxSingleCollisionsThe number of transmitted frames that encountered only 1 collision.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.7 |
cdd564EtherTxMultipleCollisionsThe number of transmitted frames that encountered more than 1 collision.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.8 |
cdd564EtherTxTotalCollisionsThe total number of collisions that were encountered while attempting to transmit. This count includes late collisions and collisions from frames that encountered maximum collisions.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.9 |
cdd564EtherTxFlowControlPauseFramesThe number of flow control frames transmitted by the device. This count includes both the XOFF and XON frames transmitted by the device.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.1.10 |
cdd564EthernetRxStats OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.2.2 |
cdd564EtherRxGoodFramesThe number of frames properly received from the link. It is updated only after actual reception from the link is completed and all data bytes are stored in memory.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.2.1 |
cdd564EtherRxCRCErrorFramesThe number of aligned frames discarded due to CRC Errors.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.2.2 |
cdd564EtherRxAllignmentErrorsThe number of frames that are both misaligned [in other words, CRS de-asserts on a non-octet boundary] and contain a CRC error.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.2.3 |
cdd564EtherRxResourceErrorsThe number of good frames discarded due to unavailable resources.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.2.4 |
cdd564EtherRxFIFOOverrunErrorsThe number of frames known to be lost because the internal receive FIFO overflowed [also known as receive overrun]. This can occur if the device is unable to get necessary PCI bandwidth. If the overflow condition persists for more than one frame, the frames that follow the first can also be lost. A frame that was counted as an overrun will not be counted in other error counters like (short frames, misaligned, CRC error).ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.2.5 |
cdd564EtherRxCollisionDetectErrorsThe number of frames that encountered collision during reception. This is always zero.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.2.6 |
cdd564EtherRxShortFramesThe number of received frames that are shorter than the minimum frame length.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.2.7 |
cdd564EtherRxFlowControlPauseFramesThe number of flow control frames received by the device. This count includes both XOFF and XON frames received.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.2.2.8 |
cdd564EthernetClearCountersReset all ethernet transmit & receive counters.rw Enumeration .1.3.6.1.4.1.6247.25.1.6.2.3 |
cdd564SatelliteStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.6.3 |
cdd564SatelliteRxStatsTableThe table for Satellite interface statistics. SEQUENCE OF Cdd564SatelliteRxStatsEntry .1.3.6.1.4.1.6247.25.1.6.3.1 |
cdd564SatelliteRxStatsEntryThe entry for the Satellite interface statistics table. Cdd564SatelliteRxStatsEntry .1.3.6.1.4.1.6247.25.1.6.3.1.1 |
cdd564RxStatsIndexThe Rx index for the satellite interface, where index can be from 1 to 4.ro INTEGER .1.3.6.1.4.1.6247.25.1.6.3.1.1.1 |
cdd564RxGoodFramesThe total number of good frames received over satellite interface.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.2 |
cdd564RxHeaderBytesThe count of HDLC header bytes received over the satellite interface. HDLC header = Control + HDLC address + Flow ID + CRCro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.3 |
cdd564RxPayloadBytesThe count of payload bytes that were received over satellite interface, excluding any frame overhead.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.4 |
cdd564RxBadHDLCAddressErrorsThe count of received frames that did not match any of the Rx HDLC addresses.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.5 |
cdd564RxPktProcCRCErrorsThe Packet Processor CRC check is the second CRC check performed after the HDLC CRC check. It is the checksum calculated after Decryption and Payload Decompression. Failures due to 3xDES and Payload Comp are detected at this level.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.6 |
cdd564RxAbortOctetErrorsThe count of aborted frames and octet error frames. Aborted frame: A frame is aborted when the frame is not complete and is terminated prematurely with the Abort signal, which is 8 consecutive '1's. Octet error: A frames that was not on a byte boudary or on a multiple of 8-bit boundary.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.7 |
cdd564RxOverrunErrorsThe count of received frames that exceeded the maximum frame length of 2K bytes or overflowed the buffer which stores complete HDLC frames.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.8 |
cdd564RxHDLCCRCErrorsThe HDLC CRC is the first stage of the CRC check, before 3xDES and paylod Decompression. It indicates any errors due to the satellite link only.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.9 |
cdd564RxInvalidFlowIDErrorsThe number of frames received where the flow ID did not match to a valid flow descriptor.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.10 |
cdd564RxSARReassembleErrorsThe number of frames corresponding to a packet which had undergone segmentation and encountered an error in reassembly.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.11 |
cdd564RxHeaderDecompressionErrorsThe number of frames with a compressed IP header that encountered an error in decompressing (rebuilding) the full IP header.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.12 |
cdd564RxMemoryAlignmentErrorsThe number of frames which were incorrectly transferred (frame too small) from the Rx FPGA.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.13 |
cdd564RxCRCErrorsThe number of frames with a CRC error detected by the Rx FPGA.ro Counter32 .1.3.6.1.4.1.6247.25.1.6.3.1.1.14 |
cdd564SatelliteClearCountersThis is a SET command for clearing all the Satellite statistic counters.rw Enumeration .1.3.6.1.4.1.6247.25.1.6.3.2 |
cdd564Config OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.7 |
cdd564Rx OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.7.1 |
cdd564RxTableThe table of Demodulators. SEQUENCE OF Cdd564RxEntry .1.3.6.1.4.1.6247.25.1.7.1.1 |
cdd564RxEntryThe entry for the Demodulator table. Cdd564RxEntry .1.3.6.1.4.1.6247.25.1.7.1.1.1 |
cdd564RxTableIndexThe index for the Rx table, where index can be from 1 to 4.ro INTEGER .1.3.6.1.4.1.6247.25.1.7.1.1.1.1 |
cdd564RxFECRx FEC type where: 0 = Uncoded 6 = Turborw Enumeration .1.3.6.1.4.1.6247.25.1.7.1.1.1.2 |
cdd564RxDemodulationRx demodulation type, where: 1 = QPSK 3 = 8-PSK 4 = 16-QAMrw Enumeration .1.3.6.1.4.1.6247.25.1.7.1.1.1.3 |
cdd564RxCodeRateRx code rate, where 4 = Rate 3/4 5 = Rate 7/8 6 = Rate 0.95 7 = Rate 1/1 (Uncoded)rw Enumeration .1.3.6.1.4.1.6247.25.1.7.1.1.1.4 |
cdd564RxDataRateRx data rate in bps (Varies based on chart below.) Units = bps Resolution = 1 bps FEC Type Modulation Code Rate Data Rate High Rate -------- ----------- ---------- --------------------- --------- Turbo QPSK Rate 3/4 16.0 Kbps to 4.5 Mbps N/A Turbo QPSK Rate 7/8 16.0 Kbps to 5.0 Mbps 5.25 Mbps Turbo QPSK Rate 0.95 16.0 Kbps to 5.0 Mbps 5.667 Mbps Turbo 8-PSK Rate 3/4 16.0 Kbps to 5.0 Mbps 6.75 Mbps Turbo 8-PSK Rate 7/8 16.0 Kbps to 5.0 Mbps 7.875 Mbps Turbo 8-PSK Rate 0.95 16.0 Kbps to 5.0 Mbps 8.5 Mbps Turbo 16-QAM Rate 3/4 16.0 Kbps to 5.0 Mbps 9.0 Mbps Turbo 16-QAM Rate 7/8 16.8 Kbps to 5.0 Mbps 9.98 Mbpsrw INTEGER .1.3.6.1.4.1.6247.25.1.7.1.1.1.5 |
cdd564RxFrequencyRx frequency for L-Band and IF-Band modes. L-Band is 950 MHz to 1950 MHz. IF-Band is 50 MHz to 90 MHz and 100 MHz to 180 MHz. Units = Hz. Resolution = 100 Hz.rw INTEGER (50000000..90000000 | 100000000..180000000 | 950000000..1950000000) UNITS "Hz" .1.3.6.1.4.1.6247.25.1.7.1.1.1.6 |
cdd564RxAcquisitionSweepWidthRx +/- acquisition sweep range of demodulator, in KHz, ranging from: +/- 1 to +/- 32 KHz (rates < 625 ksym/second) or +/- 1 to 200 KHz (rates >= 625 ksym/second)rw INTEGER .1.3.6.1.4.1.6247.25.1.7.1.1.1.7 |
cdd564RxDescramblingRx descrambler state, where: 0 = Off 1 = On (default descrambler type) 2 = On - IESS-315 (Turbo only)rw Enumeration .1.3.6.1.4.1.6247.25.1.7.1.1.1.8 |
cdd564RxBufferSizeRx buffer size, where: 0 = Buffer disabled (Clock mode = Rx satellite)rw Enumeration .1.3.6.1.4.1.6247.25.1.7.1.1.1.9 |
cdd546RxSpectrumInversionRx spectrum inversion, where: 0 = Normal 1 = Rx spectrum invertedrw Enumeration .1.3.6.1.4.1.6247.25.1.7.1.1.1.10 |
cdd564RxDataInversionInvert receive data, where: 0 = Normal 1 = Invertedrw Enumeration .1.3.6.1.4.1.6247.25.1.7.1.1.1.11 |
cdd564RxEbNoAlarmPointRx Eb/No alarm point in 0.1 dB, with a range between 0.1 dB and 16 dB. Units = 0.1 dB Resolution = 0.1 dBrw INTEGER .1.3.6.1.4.1.6247.25.1.7.1.1.1.12 |
cdd564RxRecenterBufferThis is a SET command that recenters the receive Plesiochronous/Doppler buffer.rw Enumeration .1.3.6.1.4.1.6247.25.1.7.1.1.1.13 |
cdd564RxSymbolRateRx symbol rate in symbols per second (sym) Units = sym Resolution = 1 symro INTEGER .1.3.6.1.4.1.6247.25.1.7.1.1.1.14 |
cdd564AlarmMask OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.7.2 |
cdd564AlarmMaskTableDescription. SEQUENCE OF Cdd564AlarmMaskEntry .1.3.6.1.4.1.6247.25.1.7.2.1 |
cdd564AlarmMaskEntryDescription. Cdd564AlarmMaskEntry .1.3.6.1.4.1.6247.25.1.7.2.1.1 |
cdd564AlarmMaskIndexThe index for the Demodulator.ro INTEGER .1.3.6.1.4.1.6247.25.1.7.2.1.1.1 |
cdd564AGCAlarmMaskRx AGC alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.25.1.7.2.1.1.2 |
cdd564EbNoAlarmMaskEb/No alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.25.1.7.2.1.1.3 |
cdd564LNBAlarmMaskLNB alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.25.1.7.2.1.1.5 |
cdd564Reference OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.7.3 |
cdd564ReferenceFrequencyExternal reference frequency, where: 0 = Internal 10 MHzrw Enumeration .1.3.6.1.4.1.6247.25.1.7.3.1 |
cdd564InternalReferenceAdjustInternal Reference Adjust, from -999 to +999. Units = KHzrw INTEGER (-999..999) UNITS "KHz" .1.3.6.1.4.1.6247.25.1.7.3.2 |
cdd564LNB OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.7.4 |
cdd564LNBTableThe table for LNBs. SEQUENCE OF Cdd564LNBEntry .1.3.6.1.4.1.6247.25.1.7.4.1 |
cdd564LNBEntryThe entry for the LNBs table. Cdd564LNBEntry .1.3.6.1.4.1.6247.25.1.7.4.1.1 |
cdd564LNBIndexThe index for the LNB..ro INTEGER .1.3.6.1.4.1.6247.25.1.7.4.1.1.1 |
cdd564LNBDCPowerLNB power control, where: 0 = Off 1 = On, 13V LNB voltage 2 = On, 18V LNB voltage 3 = On, 24V LNB voltagerw Enumeration .1.3.6.1.4.1.6247.25.1.7.4.1.1.2 |
cdd564LNB10MHzReferenceLNB 10MHz frequency reference, where: 0 = Disable LNB 10MHz reference 1 = Enable LNB 10MHz referencerw Enumeration .1.3.6.1.4.1.6247.25.1.7.4.1.1.3 |
cdm564LLNBLowCurrentLimitLNB lower alarm limit for current, between 10 and 400 mA.rw INTEGER .1.3.6.1.4.1.6247.25.1.7.4.1.1.4 |
cdd564LNBHighCurrentLimitLNB upper alarm limit for current, between 50 and 600 mA.rw INTEGER .1.3.6.1.4.1.6247.25.1.7.4.1.1.5 |
cdd564LNBLOFrequencyLNB receieve LO frequency, in the range of 3000 to 65000 MHz. Setting a 0 disables the feature. Terminal Frequency = LNB_LO +/- Rx_Frequency (depending on High/Low Mix)rw INTEGER (0 | 3000..65000) UNITS "MHz" .1.3.6.1.4.1.6247.25.1.7.4.1.1.6 |
cdd564LNBLOMixLO frequency mix, where: 0 = Low-side mix 1 = High-side mixrw Enumeration .1.3.6.1.4.1.6247.25.1.7.4.1.1.7 |
cdd564Monitor OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.8 |
cdd564UnitMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.8.1 |
cdd564SerialNumberUnit's 9-digit serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.8.1.1 |
cdd564SoftwareRevisionUnit returns the value of the internal software revision installed in the unit, in the form of x.x.x.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.8.1.2 |
cdd564ModelNumberUnit's model number.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.1.3 |
cdd564UnitAlarmModem Unit Faults: Value Description of unit fault 0 No faults 1 +5 Volt power supply 2 +12 Volt power supply 3 -5 Volt power supply 4 +23 Volt power supply 5 -12 Volt power supply 6 Rx 1st LO synthesize lock 7 Rx 2nd LO synthesize lock 8 Ref PLL lock 9 EEPROM checksum errorro Enumeration .1.3.6.1.4.1.6247.25.1.8.1.4 |
cdd564TemperatureUnit returns the value of the internal temperature, in degrees Celsius.ro INTEGER (-99..99) .1.3.6.1.4.1.6247.25.1.8.1.5 |
cdd564RxMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.8.2 |
cdd564RxMonitorTableThe table for monitoring demodulators. SEQUENCE OF Cdd564RxMonitorEntry .1.3.6.1.4.1.6247.25.1.8.2.1 |
cdd564RxMonitorEntryThe entry for the demoduator monitor table. Cdd564RxMonitorEntry .1.3.6.1.4.1.6247.25.1.8.2.1.1 |
cdd564RxMonitorIndexThe index for the demodulator monitor table.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.2.1.1.1 |
cdd564RxAlarmModem RX Traffic Faults Value Description of status parameter 0 Rx Traffic OK 1 Demodulator unlocked 3 AGC Alarm - signal out of range 10 Buffer underflow 11 Buffer overflow 13 Eb/No alarm 15 AIS detected on incoming dataro Enumeration .1.3.6.1.4.1.6247.25.1.8.2.1.1.2 |
cdd564RxEbNoUnit returns the value of Eb/No, between 0 and 16 db. Units = 0.1 dB Resolution 0.1 dB Returns 999 if demod is unlocked. For values greater than 16 dB, the reply will be 160.ro INTEGER (0..160 | 999) .1.3.6.1.4.1.6247.25.1.8.2.1.1.3 |
cdd564RxSignalLevelUnit returns the value of the Rx signal level, in dBm, between -20 and -99 dBm, Returns -100 if signal is less than -99dBm. Returns -19 if signal is greater than -20dBm.ro INTEGER (-100 | -99..-20 | -19) .1.3.6.1.4.1.6247.25.1.8.2.1.1.4 |
cdd564RxFreqOffsetUnit returns the value of the measured frequency offset of the carrier being demodulated in Hz. Units = Hz. Resolution 100 Hz. Range = -200,000 Hz to 0 Hz and 0 Hz to 200,000 Hz.ro INTEGER (-200000..200000 | 999900) .1.3.6.1.4.1.6247.25.1.8.2.1.1.5 |
cddRxBERMultiplierEstimated corrected BER. The BER is calculated by multiplying the Multiplier by 10E-10. Calculuation: RxBER = (Multiplier) * 0.0000000001 Returns 2147483647 (max int) if demod is unlocked.ro INTEGER (0..999999999 | 2147483647) .1.3.6.1.4.1.6247.25.1.8.2.1.1.7 |
cdd564LNBMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.8.3 |
cdd564LNBMonitorTableThe table for monitoring LNBs. SEQUENCE OF Cdd564LNBMonitorEntry .1.3.6.1.4.1.6247.25.1.8.3.1 |
cdd564LNBMonitorEntryThe entry for the LNBs monitoring table. Cdd564LNBMonitorEntry .1.3.6.1.4.1.6247.25.1.8.3.1.1 |
cdd564LNBMonitorIndexThe index for the LNBs monitoring table.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.3.1.1.1 |
cdd564LNBAlarmLNB alarms Value Description of status parameter 0 No LNB faults 7 LNB current 9 LNB voltagero Enumeration .1.3.6.1.4.1.6247.25.1.8.3.1.1.2 |
cdd564LNBCurrentIndicates the value of the LNB current, between 0 and 999 mA.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.3.1.1.3 |
cdd564LNBVoltageIndicates the value of the LNB voltage, between 0 and 30 volts. Units = 0.1 volts If not available, response is 0.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.3.1.1.4 |
cdd564LNBTerminalRxFreqTerminal Rx frequency = LNB LO +/- Rx_Frequency (depending on LO mix) Units = 100 Hz Resolution = 100 Hz Returns 0 if LNB_LO is zero.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.3.1.1.5 |
cdd564StoredEvents OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.8.4 |
cdd564StoredEventsTableThe table of stored events for all four demods. SEQUENCE OF Cdd564StoredEventsEntry .1.3.6.1.4.1.6247.25.1.8.4.1 |
cdd564StoredEventsEntryThe entry for stored events table for all 4 demods. Cdd564StoredEventsEntry .1.3.6.1.4.1.6247.25.1.8.4.1.1 |
cdd564EventDemodThe demodulator index for which event log is being returned.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.4.1.1.1 |
cdd564EventIndexThe index for a demod's stored events table.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.4.1.1.2 |
cdd564EventDescriptionEvent description string with the following format seprated by commas: 1. Date in form dd/mm/yy, where: dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99) 2. Time in form hh:mm:ss, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59) 3. Event Type in form xxxxx, where xxxxx is Clear = fault cleared Fault = fault occurred Info = information 4. Texual Description of Eventro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.8.4.1.1.3 |
cdd564ClearAllStoredEventsThis is a SET command to clear the event log for one of the four demods (1 - 4).rw INTEGER .1.3.6.1.4.1.6247.25.1.8.4.2 |
cdd564StoredStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.8.5 |
cdd564StoredStatisticsTableThe table of stored statistics for all four demods. SEQUENCE OF Cdd564StoredStatisticsEntry .1.3.6.1.4.1.6247.25.1.8.5.1 |
cdd564StoredStatisticsEntryThe entry for stored statistics table for all four demods. Cdd564StoredStatisticsEntry .1.3.6.1.4.1.6247.25.1.8.5.1.1 |
cdd564StatisticDemodThe demod index for which statistics table is being returned.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.5.1.1.1 |
cdd564StatisticIndexThe index in one of the four demod's stored statistics table.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.5.1.1.2 |
cdd564StatisticDateThe date of the statistic in the form dd/mm/yy, where: dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.8.5.1.1.3 |
cdd564StatisticTimeThe time of the statistic in the form hh:mm:ss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.8.5.1.1.4 |
cdd564StatisticAvgEbNoMinimum Eb/No during sample period. Units = 0.1 dB. Returns 999 if demod was unlocked during sample period.ro INTEGER (0..160 | 999) .1.3.6.1.4.1.6247.25.1.8.5.1.1.5 |
cdd564StatisticMinEbNoMinimum Eb/No during sample period. Units = 0.1 dB. Returns 999 if demod was unlocked during sample period.ro INTEGER (0..160 | 999) .1.3.6.1.4.1.6247.25.1.8.5.1.1.6 |
cdd564StoredStatisticsConfigTableThe configuration for the stored statistics (per Demod). SEQUENCE OF Cdd564StoredStatisticsConfigEntry .1.3.6.1.4.1.6247.25.1.8.5.2 |
cdd564StoredStatisticsConfigEntryThe entry for the stored statistics configuration table. Cdd564StoredStatisticsConfigEntry .1.3.6.1.4.1.6247.25.1.8.5.2.1 |
cdd564StoredStatisticsConfigIndexThe index for the Demodulator.ro INTEGER .1.3.6.1.4.1.6247.25.1.8.5.2.1.1 |
cdd564StatisticsSampleIntervalUsed to set the sample interval for the statistics logging function, where the enumerated lists goes from 0 to 9 in 10 minute steps. Setting 0 disables the statistics logging function.rw Enumeration .1.3.6.1.4.1.6247.25.1.8.5.2.1.2 |
cdd564ClearAllStoredStatisticsThis is a SET command to clear the statistics log for one of the four demods (1 - 4).rw INTEGER .1.3.6.1.4.1.6247.25.1.8.5.3 |
cdd564Util OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.1.9 |
cdd564RTCDateA date in the form dd/mm/yy, where dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.9.4 |
cdd564RTCTimeA time in the form hh:mm:ss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.9.5 |
cdd564CircuitIDTableThe table for Circuit IDs (Per Demod). SEQUENCE OF Cdd564CircuitIDEntry .1.3.6.1.4.1.6247.25.1.9.6 |
cdd564CircuitIDEntryThe entry for the circuit ID table. Cdd564CircuitIDEntry .1.3.6.1.4.1.6247.25.1.9.6.1 |
cdd564CircuitIDIndexThe index for the Demodulator.ro INTEGER .1.3.6.1.4.1.6247.25.1.9.6.1.1 |
cdd564CircuitIDSets or queries the user-defined Circuit ID string, which is a fixed length of 24 characters. Valid characters include: Space ( ) * + - , . / 0 thru 9 and A thru Z.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.25.1.9.6.1.2 |
cdd564Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.2 |
cdd564NotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.2.0 |
cdd564UnitAlarmNotificationTrap for Unit alarms. NOTIFICATION-TYPE .1.3.6.1.4.1.6247.25.2.0.1 |
cdd564RxAlarmNotificationTrap for Rx alarms. NOTIFICATION-TYPE .1.3.6.1.4.1.6247.25.2.0.2 |
cdd564LNBAlarmNotificationTrap for LNB alarms. NOTIFICATION-TYPE .1.3.6.1.4.1.6247.25.2.0.3 |
cdd564Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.3 |
cdd564Groups OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.3.1 |
cdd564ObjectsGroupCDD-564 Objects Group. Unknown .1.3.6.1.4.1.6247.25.3.1.1 |
cdd564NotificationsGroupCDD-564 Trap Group. Unknown .1.3.6.1.4.1.6247.25.3.1.2 |
cdd564Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.6247.25.3.2 |
cdd564ComplianceCDD-564 Compliance. Unknown .1.3.6.1.4.1.6247.25.3.2.1 |