CDM-570
Module Identity for both CDM-570 L-Band and IF-Band Satellite Modems.
Main OID:
cdm570.1.3.6.1.4.1.6247.24
155
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
155 total| Object Name |
|---|
cdm570Module Identity for both CDM-570 L-Band and IF-Band Satellite Modems. MODULE-IDENTITY .1.3.6.1.4.1.6247.24 |
cdm570Objects OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1 |
cdm570System OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.1 |
cdm570SystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.1.1 |
cdm570SerialNumberUsed to query the unit 9-digit serial number. Unit returns its S/N in the form xxxxxxxxx.ro DisplayString .1.3.6.1.4.1.6247.24.1.1.1.1 |
cdm570TemperatureUnit returns the value of the internal temperature, in degrees Celsius.ro INTEGER (-99..99) UNITS "degrees Celsius" .1.3.6.1.4.1.6247.24.1.1.1.2 |
cdm570SystemEquipmentID OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.1.2 |
cdm570TurboOptionTurbo option, where: 0 = None 1 = Turbo 2 = TPC/LDPCro Enumeration .1.3.6.1.4.1.6247.24.1.1.2.1 |
cdm570ModelNumberModem model number.ro INTEGER .1.3.6.1.4.1.6247.24.1.1.2.2 |
cdm570DataRateOptionData rate option, where: 0 = Base (512 kbps) 1 = Up to 2048 kbps 2 = Up to 5000 kbps 3 = Up to 9980 kbpsro Enumeration .1.3.6.1.4.1.6247.24.1.1.2.3 |
cdm570HigherOrderModulationHiger order modulation, where: 0 = None 1 = 8-PSK/8-QAM 2 = 16-QAM 3 = 8-PSK/8-QAM and 16-QAMro Enumeration .1.3.6.1.4.1.6247.24.1.1.2.4 |
cdm570IPOptionIP Controller card, where: 0 = None 1 = Installedro Enumeration .1.3.6.1.4.1.6247.24.1.1.2.5 |
cdm570RSCodecOptionRS Codec Option, where: 0 = None 1 = Installedro Enumeration .1.3.6.1.4.1.6247.24.1.1.2.6 |
cdm570SystemFirmware OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.1.3 |
cdm570FirmwareRevisionUnit returns the value of the internal software revision installed in the unit, in the form of: Boot: XXXXXX Bulk1: YYYYYY Bulk2: ZZZZZZ, where: XXXXXX = software version of boot YYYYYY = software version of bulk1 ZZZZZZ = software version of bulk2ro DisplayString .1.3.6.1.4.1.6247.24.1.1.3.1 |
cdm570Config OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2 |
cdm570EthernetRemoteControl OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.1 |
cdm570IpAddressThe IP address for the 10/100 BaseTx Ethernet management port.rw IpAddress .1.3.6.1.4.1.6247.24.1.2.1.1 |
cdm570IpSubnetMaskThe network prefix length for the 10/100 BaseTx Ethernet management port.rw INTEGER .1.3.6.1.4.1.6247.24.1.2.1.2 |
cdm570DefaultGatewayThe IP address of the default gateway.rw IpAddress .1.3.6.1.4.1.6247.24.1.2.1.3 |
cdm570MacAddressThe MAC address of the Ethernet interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6247.24.1.2.1.4 |
cdm570AccessLists OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.1.5 |
cdm570AccessListEnforcementEnable or disable enforcement of the the access list. Note: Be sure that you have added the SNMP browser's/manager's IP Address to the access list before enabling access list filtering. Otherwise, the SNMP browser/manager will no longer be able to gain access to the unit.rw Enumeration .1.3.6.1.4.1.6247.24.1.2.1.5.1 |
cdm570AccessListTableThe table that holds the access list. SEQUENCE OF Cdm570AccessListEntry .1.3.6.1.4.1.6247.24.1.2.1.5.2 |
cdm570AccessListEntryThe entry for the access list table. Cdm570AccessListEntry .1.3.6.1.4.1.6247.24.1.2.1.5.2.1 |
cdm570AccessListIndexThe index for the access list from 1..4.ro INTEGER .1.3.6.1.4.1.6247.24.1.2.1.5.2.1.1 |
cdm570AccessIPAddressThe IP addresses that can access the unit. The value of 0.0.0.0 means not defined.rw IpAddress .1.3.6.1.4.1.6247.24.1.2.1.5.2.1.2 |
cdm570AccessSubnetMaskLengthThe subnet mask length of the IP address for the access list. Subnet mask can be from 8..32. The value of 0 means not defined.rw INTEGER (0 | 8..32) .1.3.6.1.4.1.6247.24.1.2.1.5.2.1.3 |
cdm570SNMP OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.1.6 |
cdm570SNMPTrapDestinationIpAddress1The IP address were SNMP notifications (traps) are to be sent. This IP address should correspond to a SNMP manager or browser.rw IpAddress .1.3.6.1.4.1.6247.24.1.2.1.6.1 |
cdm570SNMPTrapDestinationIpAddress2The IP address were SNMP notifications (traps) are to be sent. This IP address should correspond to a SNMP manager or browser.rw IpAddress .1.3.6.1.4.1.6247.24.1.2.1.6.2 |
cdm570SNMPTrapCommunityThe community that will be included in SNMP notifications (traps) that are sent from unit.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.24.1.2.1.6.3 |
cdm570SNMPTrapVersionThe SNMP version that will be used when sending traps from the unit. SNMPv1 will send V1 traps. SNMPv2 will send V2 notifications.rw Enumeration .1.3.6.1.4.1.6247.24.1.2.1.6.4 |
cdm570Tx OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.2 |
cdm570TxFrequencyTransmit frequency for both CDM-570L (L-Band) modem and CDM-570 (IF-band) modems. L-Band is 950 MHz to 1950 MHz. IF-Band is 50 MHz to 90 MHz and 100 MHz to 180 MHz. Units = Hz. Resolution = 100 Hz.rw INTEGER (50000000..90000000 | 100000000..180000000 | 950000000..1950000000) UNITS "Hz" .1.3.6.1.4.1.6247.24.1.2.2.1 |
cdm570TxDataRateTx data rate in bps (Varies based on chart below.) Units = bps Resolution = 1 bps FEC Type Modulation Code Rate Data Rate High Rate -------- ----------- ---------- --------------------- --------- None BPSK Uncoded 4.8 kbps to 3.0 Mbps None QPSK/OQPSK Uncoded 9.6 kbps to 5.0 Mbps Viterbi BPSK Rate 1/2 2.4 kbps to 1.5 Mbps Viterbi QPSK/OQPSK Rate 1/2 4.8 kbps to 3.0 Mbps Viterbi QPSK/OQPSK Rate 3/4 7.2 kbps to 4.5 Mbps Viterbi QPSK/OQPSK Rate 7/8 8.4 kbps to 5.0 Mbps Vit + RS BPSK Rate 1/2 2.4 kbps to 1.363 Mbps Vit + RS QPSK/OQPSK Rate 1/2 4.3 kbps to 2.727 Mbps Vit + RS QPSK/OQPSK Rate 3/4 6.5 kbps to 4.091 Mbps Vit + RS QPSK/OQPSK Rate 7/8 7.5 kbps to 4.666 Mbps Vit + RS 16-QAM Rate 3/4 13.0 kbps to 4.0 Mbps Vit + RS 16-QAM Rate 7/8 16.8 kbps to 4.666 Mbps TCM + RS 8-PSK Rate 2/3 8.7 kbps to 4.4 Mbps Turbo BPSK Rate 5/16 2.4 kbps to 0.937 Mbps Turbo BPSK Rate 21/44 2.4 kbps to 1.430 Mbps Turbo QPSK/OQPSK Rate 21/44 4.8 kbps to 2.860 Mbps Turbo QPSK/OQPSK Rate 3/4 7.2 kbps to 4.5 Mbps N/A Turbo QPSK/OQPSK Rate 7/8 8.4 kbps to 5.0 Mbps 5.25 Mbps Turbo QPSK/OQPSK Rate 0.95 9.1 kbps to 5.0 Mbps 5.667 Mbps Turbo 8-PSK/8-QAM Rate 3/4 10.8 kbps to 5.0 Mbps 6.75 Mbps Turbo 8-PSK/Q-QAM Rate 7/8 13.6 kbps to 5.0 Mbps 7.875 Mbps Turbo 8-PSK/Q-QAM Rate 0.95 15.3 kbps to 5.0 Mbps 8.5 Mbps Turbo 16-QAM Rate 3/4 14.4 kbps to 5.0 Mbps 9.0 Mbps Turbo 16-QAM Rate 7/8 16.8 kbps to 5.0 Mbps 9.98 Mbpsrw INTEGER .1.3.6.1.4.1.6247.24.1.2.2.2 |
cdm570TxFECCodeRateTransmit code rate, where 0 = Rate 5/16 (Turbo only) 1 = Rate 22/44 (Turbo only) 2 = Rate 1/2 3 = Rate 2/3 (8-PSK TCM or 16-QAM only) 4 = Rate 3/4 5 = Rate 7/8 6 = Rate 0.95 (Turbo only) 7 = Rate 1/1 (Uncoded or No FEC)rw Enumeration .1.3.6.1.4.1.6247.24.1.2.2.3 |
cdm570TxModTypeTransmit modulation type, where: 0 = BPSK 1 = QPSK 2 = OQPSK 3 = 8-PSK 4 = 16-QAM (Turbo or Viterbi + RS only) 5 = 8-QAM Depending on FEC type, not all of these selections will be valid.rw Enumeration .1.3.6.1.4.1.6247.24.1.2.2.4 |
cdm570TxFECTypeTransmit FEC type where: 0 = Uncoded 1 = Viterbi 2 = Viterbit + Reed-Solomon 5 = TCM + Reed-Solomon (Code Rate = 2/3) 6 = Turbo 7 = TPC/LDPC Depending on hardware, not all of these selections will be valid.rw Enumeration .1.3.6.1.4.1.6247.24.1.2.2.5 |
cdm570TxSpectrumInvertTransmit spectrum invert selection, where: 0 = Normal 1 = Transmit spectrum invertedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.2.6 |
cdm570TxDataInvertInvert transmit data, where: 0 = Normal 1 = Invertedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.2.7 |
cdm570TxClockSourceTransmit clock source, where: 0 = Internal 1 = Tx Terrestrial 2 = Loop-Timedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.2.8 |
cdm570TxScramblerTransmit scrambler state, where: 0 = Off 1 = On (Default scrambler type) 2 = On = IESS-315 (Turbo only)rw Enumeration .1.3.6.1.4.1.6247.24.1.2.2.9 |
cdm570TxPowerLevelTransmit output power level for both CDM-570L (L-Band) modem and CDM-570 (IF-band) modem. CDM-570L power level is between -40 and 0 dBm. CDM-570 power level is between -25 and 0 dBm. Units = 0.1 dBmrw INTEGER (-400..0) UNITS "0.1 dBm" .1.3.6.1.4.1.6247.24.1.2.2.10 |
cdm570TxCarrierStateTransmit carrier state, where: 0 = Off 1 = On 2 = RTI (Receive/Transmit Inhibit) The following values are query only: 3 = External Control (read only) 4 = BUC warm-up delay (read only) 5 = STDMA Burst (ready only)rw Enumeration .1.3.6.1.4.1.6247.24.1.2.2.11 |
cdm570TxSymbolRateTx symbol rate in symbols per second (sps) Units = symbols per second (sps) Resolution = 1 spsro INTEGER .1.3.6.1.4.1.6247.24.1.2.2.12 |
cdm570Rx OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.3 |
cdm570RxFrequencyReceive frequency for both CDM-570L (L-Band) modem and CDM-570 (IF-band) modems. L-Band is 950 MHz to 1950 MHz. IF-Band is 50 MHz to 90 MHz and 100 MHz to 180 MHz. Units = Hz. Resolution = 100 Hz.rw INTEGER (50000000..90000000 | 100000000..180000000 | 950000000..1950000000) UNITS "Hz" .1.3.6.1.4.1.6247.24.1.2.3.1 |
cdm570RxDataRateRx data rate in bps (Varies based on chart below.) Units = bps Resolution = 1 bps FEC Type Modulation Code Rate Data Rate High Rate -------- ----------- ---------- --------------------- --------- None BPSK Uncoded 4.8 kbps to 3.0 Mbps None QPSK/OQPSK Uncoded 9.6 kbps to 5.0 Mbps Viterbi BPSK Rate 1/2 2.4 kbps to 1.5 Mbps Viterbi QPSK/OQPSK Rate 1/2 4.8 kbps to 3.0 Mbps Viterbi QPSK/OQPSK Rate 3/4 7.2 kbps to 4.5 Mbps Viterbi QPSK/OQPSK Rate 7/8 8.4 kbps to 5.0 Mbps Vit + RS BPSK Rate 1/2 2.4 kbps to 1.363 Mbps Vit + RS QPSK/OQPSK Rate 1/2 4.3 kbps to 2.727 Mbps Vit + RS QPSK/OQPSK Rate 3/4 6.5 kbps to 4.091 Mbps Vit + RS QPSK/OQPSK Rate 7/8 7.5 kbps to 4.666 Mbps Vit + RS 16-QAM Rate 3/4 13.0 kbps to 4.0 Mbps Vit + RS 16-QAM Rate 7/8 16.8 kbps to 4.666 Mbps TCM + RS 8-PSK Rate 2/3 8.7 kbps to 4.4 Mbps Turbo BPSK Rate 5/16 2.4 kbps to 0.937 Mbps Turbo BPSK Rate 21/44 2.4 kbps to 1.430 Mbps Turbo QPSK/OQPSK Rate 21/44 4.8 kbps to 2.860 Mbps Turbo QPSK/OQPSK Rate 3/4 7.2 kbps to 4.5 Mbps N/A Turbo QPSK/OQPSK Rate 7/8 8.4 kbps to 5.0 Mbps 5.25 Mbps Turbo QPSK/OQPSK Rate 0.95 9.1 kbps to 5.0 Mbps 5.667 Mbps Turbo 8-PSK/8-QAM Rate 3/4 10.8 kbps to 5.0 Mbps 6.75 Mbps Turbo 8-PSK/Q-QAM Rate 7/8 13.6 kbps to 5.0 Mbps 7.875 Mbps Turbo 8-PSK/Q-QAM Rate 0.95 15.3 kbps to 5.0 Mbps 8.5 Mbps Turbo 16-QAM Rate 3/4 14.4 kbps to 5.0 Mbps 9.0 Mbps Turbo 16-QAM Rate 7/8 16.8 kbps to 5.0 Mbps 9.98 Mbpsrw INTEGER .1.3.6.1.4.1.6247.24.1.2.3.2 |
cdm570RxFECCodeRateRx code rate, where 0 = Rate 5/16 (Turbo only) 1 = Rate 22/44 (Turbo only) 2 = Rate 1/2 3 = Rate 2/3 (8-PSK TCM or 16-QAM only) 4 = Rate 3/4 5 = Rate 7/8 6 = Rate 0.95 (Turbo only) 7 = Rate 1/1 (Uncoded or No FEC)rw Enumeration .1.3.6.1.4.1.6247.24.1.2.3.3 |
cdm570RxDemodTypeRx demodulation type, where: 0 = BPSK 1 = QPSK 2 = OQPSK 3 = 8-PSK 4 = 16-QAM (Turbo or Viterbi + RS only) 5 = 8-QAM Depending on FEC type, not all of these selections will be valid.rw Enumeration .1.3.6.1.4.1.6247.24.1.2.3.4 |
cdm570RxFECTypeRx FEC type where: 0 = Uncoded 1 = Viterbi 2 = Viterbit + Reed-Solomon 5 = TCM + Reed-Solomon (Code Rate = 2/3) 6 = Turbo 7 = TPC/LDPC Depending on hardware, not all of these selections will be valid.rw Enumeration .1.3.6.1.4.1.6247.24.1.2.3.5 |
cdm570RxEbNoAlarmPointRx Eb/No alarm point in 0.1 dB, with a range between 0.1 dB and 16 dB. Units = 0.1 dB. Resolution = 0.1 dB.rw INTEGER .1.3.6.1.4.1.6247.24.1.2.3.6 |
cdm570RxSpectrumInvertRx spectrum inversion, where: 0 = Normal 1 = Rx spectrum invertedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.3.7 |
cdm570RxDataInvertInvert receive data, where: 0 = Normal 1 = Invertedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.3.8 |
cdm570RxBufferSizeRx buffer size, where: 0 = Buffer disabled (Clock mode = Rx satellite) 1 = +/- 1024 bits 2 = +/- 2048 bits 3 = +/- 4096 bits 4 = +/- 8192 bits 5 = +/- 16384 bits 6 = +/- 32786 bits 7 = +/- 128 bits 8 = +/- 256 bits 9 = +/- 512 bitsrw Enumeration .1.3.6.1.4.1.6247.24.1.2.3.9 |
cdm570RxDescramblerRx descrambler state, where: 0 = Off 1 = On (default descrambler type) 2 = On - IESS-315 (Turbo only)rw Enumeration .1.3.6.1.4.1.6247.24.1.2.3.10 |
cdm570RxDemodAcqSweepWidthRx +/- acquisition sweep range of demodulator, in KHz, ranging from: +/- 1 to +/- 32 KHz (rates < 625 ksym/second) or +/- 1 to 200 KHz (rates >= 625 ksym/second).rw INTEGER .1.3.6.1.4.1.6247.24.1.2.3.11 |
cdm570RxSymbolRateRx symbol rate in symbols per second (sps) Units = symbols per second (sps) Resolution = 1 spsro INTEGER .1.3.6.1.4.1.6247.24.1.2.3.12 |
cdm570Frame OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.4 |
cdm570FramingModeUnit operating mode, where: 0 = Unframed 1 = EDMAC Framing 2 = EDMAC-2 Framingrw Enumeration .1.3.6.1.4.1.6247.24.1.2.4.1 |
cdm570EDMAC OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.4.2 |
cdm570EDMACModeEDMAC mode, where: 0 = EDMAC Idle 1 = EDMAC Master 2 = EDMAC Slaverw Enumeration .1.3.6.1.4.1.6247.24.1.2.4.2.1 |
cdm570EDMACAddressFor a Master, the EDMA Address is the range of addresses of distant-end units (modems or transceivers) which this unit, as the Master, will forward messages for. Only values which are integer multiples of ten are permitted. (10, 20, 30, 40, etc....) For a Slave, the EDMAC address is the address of the slave and is query only.rw INTEGER .1.3.6.1.4.1.6247.24.1.2.4.2.2 |
cdm570AUPC OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.4.3 |
cdm570AUPCEnableAUPC mode enable/disable, where: 0 = Disable 1 = Enable Note: To enable AUPC, framing must FIRST be enabled.rw Enumeration .1.3.6.1.4.1.6247.24.1.2.4.3.1 |
cdm570AUPCRemoteDemodTargetEbNoTarget Eb/No value for remote demod, from 0.0 to 14.9 dB. Units = 0.1 dB.rw INTEGER .1.3.6.1.4.1.6247.24.1.2.4.3.2 |
cdm570AUPCTxPowerMaxIncreaseMax increase in Tx Power permitted, from 0 to 9 dB. Units = dB.rw INTEGER .1.3.6.1.4.1.6247.24.1.2.4.3.3 |
cdm570AUPCActionOnMaxPowerDefines action on max. power condition, where: 0 = No action 1 = Generate Tx alarmrw Enumeration .1.3.6.1.4.1.6247.24.1.2.4.3.4 |
cdm570AUPCActionOnRemoteDemodUnlockDefines action on remote demod unlock, where: 0 = Go to nominal power 1 = Go to max powerrw Enumeration .1.3.6.1.4.1.6247.24.1.2.4.3.5 |
cdm570Interface OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.5 |
cdm570DataInterfaceTerrestrial interface type, where: 0 = EIA-422/EIA-530 DCE 1 = V.35 DCE 2 = EIA-232 (sync) 3 = G.703 T1 AMI (forces Rx and Tx data rates to 1544 kbps) 4 = G.703 T1 B8ZS (forces Rx and Tx data rates to 1544 kbps) 5 = G.703 E1 Unbal AMI (forces Rx and Tx data rates to 2048 kbps) 6 = G.703 E1 Unbal HDB3 (forces Rx and Tx data rates to 2048 kbps) 7 = G.703 E1 Bal AMI (forces Rx and Tx data rates to 2048 kbps) 8 = G.703 E1 Bal HDB3 (forces Rx and Tx data rates to 2048 kbps) 9 = IP (Ethernet)rw Enumeration .1.3.6.1.4.1.6247.24.1.2.5.1 |
cdm570RTSCTSOper OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.5.2 |
cdm570RTSDefines how RTS/CTS will operate at the main data interface, where: 0 = RTS/CTS Loop, No Action (RTS and CTS are looped, so that CTS echoes the state of RTS, but RTS does not control the ON/OFF state of the carrier) 1 = Loop, RTS controls Tx Ouput (RTS and CTS are looped, so that CTS echoes the state of RTS and RTS controls the ON/OFF state of the carrier - the modem will not bring up its TX carrier until RTS is asserted.) 2 = Ignore RTS, Assert CTS Query Only: 3 = 1:N system in use, RTS/CTS ignoredrw Enumeration .1.3.6.1.4.1.6247.24.1.2.5.2.1 |
cdm570G703T1 OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.5.3 |
cdm570T1LineBuildOutValid only for T1 interface, where: 0 = 0 - 133 feet 1 = 133 - 266 feet 2 = 266 - 399 feet 3 = 399 - 533 feet 4 = 533 - 655 feetrw Enumeration .1.3.6.1.4.1.6247.24.1.2.5.3.1 |
cdm570Reference OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.6 |
cdm570ReferenceFrequencyExternal reference frequency, where: 0 = Internal 10 MHz 1 = External 1 MHz 2 = External 2 MHz 3 = External 5 MHz 4 = External 10 MHz 5 = External 20 MHzrw Enumeration .1.3.6.1.4.1.6247.24.1.2.6.1 |
cdm570AlarmMask OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.7 |
cdm570AlarmMaskTxFIFOTx FIFO alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.7.1 |
cdm570AlarmMaskG703BPVG.703 BPV alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.7.2 |
cdm570AlarmMaskTxAISTx-AIS alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.7.3 |
cdm570AlarmMaskRxAGCRx AGC alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.7.4 |
cdm570AlarmMaskEbNoAlarmEb/No alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.7.5 |
cdm570AlarmMaskRxAISRx-AIS alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.7.6 |
cdm570AlarmMaskBufferSlipBuffer slip alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.7.7 |
cdm570AlarmMaskExtReferenceExternal reference alarm mask, where: 0 = Unmasked 1 = Maskedrw Enumeration .1.3.6.1.4.1.6247.24.1.2.7.8 |
cdm570ODU OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.2.8 |
cdm570Monitor OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.3 |
cdm570Alarms OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.3.1 |
cdm570UnitAlarmsModem Unit Faults: Value Description of unit fault 0 No faults 1 +5 Volt power supply 2 +12 Volt power supply 3 -5 Volt power supply 4 +23 Volt power supply 5 -12 Volt power supply 6 Tx synthesizer lock 7 Rx 1st LO synthesize lock 8 Rx 2nd LO synthesize lock 9 Ref PLL lock 14 MPP50 (IP Module) Fault 15 EEPROM checksum errorro Enumeration .1.3.6.1.4.1.6247.24.1.3.1.1 |
cdm570TxAlarmsModem TX Traffic Faults: Value Description of Tx Traffic status 0 Tx traffic OK 1 No clock from terrestrial interface 3 Tx FIFO slip 5 Loss of External Reference 7 AUPC upper limit reached 9 AIS Detected on incoming data 11 Bipolar violation on G.705 interfacero Enumeration .1.3.6.1.4.1.6247.24.1.3.1.2 |
cdm570RxAlarmsModem RX Traffic Faults Value Description of status parameter 0 Rx Traffic OK 1 Demodulator unlocked 3 AGC Alarm - signal out of range 5 RS Frame sync alarm 7 EDMAC Frame sync alarm 10 Buffer underflow 11 Buffer overflow 13 Eb/No alarm 15 AIS detected on incoming dataro Enumeration .1.3.6.1.4.1.6247.24.1.3.1.3 |
cdm570RxParams OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.3.2 |
cdm570RxBERMultiplierEstimated corrected BER. The BER is calculated by mubliplying the Multiplier by 10E-10. Calculuation: RxBER = (Multiplier) * 0.0000000001 Returns 2147483647 (max int) if demod is unlocked.ro INTEGER (0..999999999 | 2147483647) UNITS "Scale Factor by 10E-10" .1.3.6.1.4.1.6247.24.1.3.2.1 |
cdm570BufferFillStateUnit returns the value of the buffer fill state, between 1 to 99%. Returns 0 if demodulator is unlocked. Returns -1 if buffer is disabled.ro INTEGER (-1 | 0 | 1..99) UNITS "% (percentage)" .1.3.6.1.4.1.6247.24.1.3.2.2 |
cdm570RxFrequencyOffsetUnit returns the value of the measured frequency offset of the carrier being demodulated in Hz. Units = Hz. Resolution 100 Hz. Range = -200,000 Hz to 0 Hz and 0 Hz to 200,000 Hz.ro INTEGER (-200000..200000 | 999900) UNITS "Hz" .1.3.6.1.4.1.6247.24.1.3.2.3 |
cdm570RxSignalLevelUnit returns the value of the Rx signal level, in dBm, between -99 dBm and -5 dBm. Returns -100 if signal is less than -99 dBm. Returns -4 if signal is greater than -5 dBm.ro INTEGER (-100 | -99..-5 | -4) UNITS "dBm" .1.3.6.1.4.1.6247.24.1.3.2.4 |
cdm570RxEbNoUnit returns the value of Eb/No, between 0 and 16 db. Units = 0.1 dB. Resolution 0.1 dB. Returns 999 if demod is unlocked. For values greater than 16 dB, the reply will be 160.ro INTEGER (0..160 | 999) UNITS "0.1 dB" .1.3.6.1.4.1.6247.24.1.3.2.5 |
cdm570EventLog OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.3.3 |
cdm570StoredEventsTableThe table for stored events. SEQUENCE OF Cdm570StoredEventsEntry .1.3.6.1.4.1.6247.24.1.3.3.1 |
cdm570StoredEventsEntryThe entry for the stored events table. Cdm570StoredEventsEntry .1.3.6.1.4.1.6247.24.1.3.3.1.1 |
cdm570EventIndexThe index for stored events table.ro INTEGER .1.3.6.1.4.1.6247.24.1.3.3.1.1.1 |
cdm570EventDateThe date of the event in the form ddmmyy, where dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99)ro DisplayString .1.3.6.1.4.1.6247.24.1.3.3.1.1.2 |
cdm570EventTimeThe time of the event in the form hhmmss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59)ro DisplayString .1.3.6.1.4.1.6247.24.1.3.3.1.1.3 |
cdm570EventDescriptionThe event description string with following format: {1 of the following: Clear, Fault, Info} - {Texual Description of Event}ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6247.24.1.3.3.1.1.4 |
cdm570ClearAllStoredEventsForces the software to clear the event log. This is a command only.rw Enumeration .1.3.6.1.4.1.6247.24.1.3.3.2 |
cdm570Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.3.4 |
cdm570StatisticsSampleIntervalUsed to set the sample interval for the statistics logging function, where the enumerated lists goes from 0 to 9 in 10 minute steps. Setting 0 disables the statistics logging function.rw Enumeration .1.3.6.1.4.1.6247.24.1.3.4.1 |
cdm570StoredStatisticsTableDescription. SEQUENCE OF Cdm570StoredStatisticsEntry .1.3.6.1.4.1.6247.24.1.3.4.2 |
cdm570StoredStatisticsEntryEntry for stored statistics table. Cdm570StoredStatisticsEntry .1.3.6.1.4.1.6247.24.1.3.4.2.1 |
cdm570StatisticIndexIndex for stored statistics table.ro INTEGER .1.3.6.1.4.1.6247.24.1.3.4.2.1.1 |
cdm570StatisticDateThe date of the statistic in the form ddmmyy, where: dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99)ro DisplayString .1.3.6.1.4.1.6247.24.1.3.4.2.1.2 |
cdm570StatisticTimeThe time of the statistic in the form hhmmss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59)ro DisplayString .1.3.6.1.4.1.6247.24.1.3.4.2.1.3 |
cdm570StatisticMinEbNoMinimum Eb/No during sample period. Units = 0.1 dB. Returns 999 if demod was unlocked during sample period.ro INTEGER (0..160 | 999) UNITS "0.1 dB" .1.3.6.1.4.1.6247.24.1.3.4.2.1.4 |
cdm570StatisticAvgEbNoMinimum Eb/No during sample period. Units = 0.1 dB. Returns 999 if demod was unlocked during sample period.ro INTEGER (0..160 | 999) UNITS "0.1 dB" .1.3.6.1.4.1.6247.24.1.3.4.2.1.5 |
cdm570StatisticMaxTxPowerIncreaseMax. Tx power level increase during sample period. Units = 0.1 dBro INTEGER .1.3.6.1.4.1.6247.24.1.3.4.2.1.6 |
cdm570StatisticAvgTxPowerIncreaseAverage Tx power level increase during sample period. Units = 0.1 dBro INTEGER .1.3.6.1.4.1.6247.24.1.3.4.2.1.7 |
cdm570ClearAllStoredStatisticsForces the software to clear the statistics log. This is a command only.rw Enumeration .1.3.6.1.4.1.6247.24.1.3.4.3 |
cdm570AUPCParams OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.3.5 |
cdm570AUPCRemoteDemodEbNoReturns the value of the Eb/No ofthe remote demodulator. Units = 0.1 dB Responds 999 = remote demod unlocked. Responds 0 = EDMAC is disabled.ro INTEGER (0 | 20..160 | 999) UNITS "0.1 dB" .1.3.6.1.4.1.6247.24.1.3.5.1 |
cdm570AUPCTxPowerIncreaseReturns the increase in Tx power level, in 0.1 dB (from the nominal setting) due to the action of AUPC. Responds with 999 if AUPC is disabled.ro INTEGER (0..90 | 999) UNITS "0.1 dB" .1.3.6.1.4.1.6247.24.1.3.5.2 |
cdm570ODUParams OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.3.6 |
cdm570Test OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.4 |
cdm570UnitTestModeUnit Test Mode where: 0 = Normal Mode 1 = IF Loopback 2 = Digital Loopback 3 = IO Loopback 4 = RF Loopback 5 = Tx CW 6 = Tx Alternating Patternrw Enumeration .1.3.6.1.4.1.6247.24.1.4.1 |
cdm570SaveLoad OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.5 |
cdm570ConfigurationSaveCauses the device to store the current modem configuration in configuration memory location defined by the argument (0 to 9). This is a COMMAND ONLY. Get always responds with 0.rw INTEGER .1.3.6.1.4.1.6247.24.1.5.1 |
cdm570ConfigurationLoadCauses the device to retrieve a previously stored modem configuration from configuration memory location defined by the argument (0 to 9). This is a COMMAND ONLY. Get always responds with 0.rw INTEGER .1.3.6.1.4.1.6247.24.1.5.2 |
cdm570Util OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.6 |
cdm570Buffer OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.6.1 |
cdm570ReCenterBufferForces the software to recenter the receive Plesiochronous/Doppler buffer. This is a command only.rw Enumeration .1.3.6.1.4.1.6247.24.1.6.1.1 |
cdm570RealTimeClock OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.6.2 |
cdm570RTCDateA date in the form dd/mm/yy, where dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99)rw DisplayString .1.3.6.1.4.1.6247.24.1.6.2.1 |
cdm570RTCTimeA time in the form hh:mm:ss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59)rw DisplayString .1.3.6.1.4.1.6247.24.1.6.2.2 |
cdm570InternalReference OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.6.3 |
cdm570WarmUpDelayWarm-up delay for internal frequency reference (OCXO), where: 0 = Disabled (instant on - no delay for OCXO to reach temperature) 1 = Enabled (unit waits until OCXO reaches correct temperature)rw Enumeration .1.3.6.1.4.1.6247.24.1.6.3.2 |
cdm570WarmUpCountdownAs a query, returns the Warm-up delay countdown in seconds remaining. As a command, only takes the argument 0 and is used to truncate the warm-up delay period to zero, forcing the unit into 'instanct-on' mode.rw INTEGER .1.3.6.1.4.1.6247.24.1.6.3.3 |
cdm570ID OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.6.4 |
cdm570CircuitIDSets or queries the user-defined Circuit ID string, which is a fixed length of 24 characters. Valid characters include: Space ( ) * + - , . / 0 thru 9 and A thru Zrw DisplayString .1.3.6.1.4.1.6247.24.1.6.4.1 |
cdm570Redundancy OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.6.5 |
cdm570RedundancyStateUnit returns the redundancy state of the unit, where: 0 = Offline 1 = Onlinero Enumeration .1.3.6.1.4.1.6247.24.1.6.5.1 |
cdm570ForceRedundentSwitchForce redundundent switch command.rw Enumeration .1.3.6.1.4.1.6247.24.1.6.5.2 |
cdm570ODUComms OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.1.6.6 |
cdm570ODUCommsEnabledODU Comms, where 0 = Disabled 1 = Enabledrw Enumeration .1.3.6.1.4.1.6247.24.1.6.6.1 |
cdm570Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.2 |
cdm570NotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.2.0 |
cdm570UnitAlarmModem Unit Faults Trap NOTIFICATION-TYPE .1.3.6.1.4.1.6247.24.2.0.1 |
cdm570TxTrafficAlarmModem TX Traffic Faults Trap NOTIFICATION-TYPE .1.3.6.1.4.1.6247.24.2.0.2 |
cdm570RxTrafficAlarmModem RX Traffic Faults Trap NOTIFICATION-TYPE .1.3.6.1.4.1.6247.24.2.0.3 |
cdm570Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.3 |
cdm570Groups OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.3.1 |
cdm570ObjectsGroupCDM-570 (Both L-Band and IF-Band) Objects Group. Unknown .1.3.6.1.4.1.6247.24.3.1.1 |
cdm570NotificationsGroupCDM-570 (Both L-Band and IF-Band) Notifications Group. Unknown .1.3.6.1.4.1.6247.24.3.1.2 |
cdm570Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.6247.24.3.2 |
cdm570ComplianceCDM-570 (Both L-Band and IF-Band) Compliance. Unknown .1.3.6.1.4.1.6247.24.3.2.1 |