Dell-vlan-MIB
AI MIB Summary
The Dell-vlan-MIB module provides management access to VLAN configuration and status parameters on Dell networking hardware, specifically enabling the monitoring of IP multicast group memberships and forwarding states within VLAN interfaces.
The private MIB module definition for IP Multicast support in Dell devices.
Main OID:
vlan.1.3.6.1.4.1.89.48
206
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
206 total| Object Name |
|---|
vlanThe private MIB module definition for IP Multicast support in Dell devices. MODULE-IDENTITY .1.3.6.1.4.1.89.48 |
vlanMibVersionMIB's version :
Version 2: the current VLAN MIB replaced the previous one;
Version 3: field vlanPortForbiddenEgressPort was added.
Version 4: dot1q and dot1v supported
Version 5: Private Edge Vlan
vlanPrivateEdgeSupported
vlanPrivateEdgeMibVersion
vlanPrivateEdgeTablero INTEGER .1.3.6.1.4.1.89.48.1 |
vlanMaxTableNumberMaximum number of VLAN Tables supported by the device.ro INTEGER .1.3.6.1.4.1.89.48.2 |
vlanNameTableThis table translates Vlan name to Vlan's tag and ifindex SEQUENCE OF VlanNameEntry .1.3.6.1.4.1.89.48.21 |
vlanNameEntryThe row definition for this table. VlanNameEntry .1.3.6.1.4.1.89.48.21.1 |
vlanNameNameThe Vlan's namero DisplayString .1.3.6.1.4.1.89.48.21.1.1 |
vlanNameTagThe Vlan's tagro INTEGER .1.3.6.1.4.1.89.48.21.1.2 |
vlanNameIfIndexThe Vlan's ifindexro INTEGER .1.3.6.1.4.1.89.48.21.1.3 |
vlanPortModeTableThis table hold information on port status trunk or access SEQUENCE OF VlanPortModeEntry .1.3.6.1.4.1.89.48.22 |
vlanPortModeEntryThe row definition for this table. VlanPortModeEntry .1.3.6.1.4.1.89.48.22.1 |
vlanPortModeStateThe port state, 1 is generic clirw INTEGER .1.3.6.1.4.1.89.48.22.1.1 |
vlanSendUnknownToAllPortsIf a value of the parameter is true a frame with unknown
destination MAC address sent by the Layer 3 to a VLAN will be
sent to all ports of the VLAN.
If a value of the parameter is false a frame with unknown
destination MAC address sent by the Layer 3 to a VLAN will be
discarded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.27 |
vlanDefaultSupportedsupported or not default vlan.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.29 |
vlanDot1vSupported802.1v standard for vlan per port and protocol.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.31 |
vlanDefaultEnabledif supported default vlan , indicate enabled or disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.32 |
vlanSpecialTagTablespecial vlan tag used for this port SEQUENCE OF VlanSpecialTagEntry .1.3.6.1.4.1.89.48.33 |
vlanSpecialTagEntryentry of special tag VlanSpecialTagEntry .1.3.6.1.4.1.89.48.33.1 |
vlanSpecialTagVIDspecify the special vlan tag .rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.33.1.1 |
vlanSpecialTagStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.33.1.2 |
vlanSpecialTagCurrentTablespecial Current vlan tag used for this port SEQUENCE OF VlanSpecialTagCurrentEntry .1.3.6.1.4.1.89.48.34 |
vlanSpecialTagCurrentEntryentry of Current special tag VlanSpecialTagCurrentEntry .1.3.6.1.4.1.89.48.34.1 |
vlanSpecialTagCurrentVIDspecify the special vlan tag .ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.34.1.1 |
vlanSpecialTagCurrentReservedspecify if the special vlan tag is reserved .ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.34.1.2 |
vlanSpecialTagCurrentActivespecify if the special vlan tag is used .ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.34.1.3 |
vlanPrivateEdgeSupportedis private edge supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.35 |
vlanPrivateEdgeVersionprivate edge version.ro INTEGER .1.3.6.1.4.1.89.48.36 |
vlanPrivateEdgeTabletable for pve port and uplink SEQUENCE OF VlanPrivateEdgeEntry .1.3.6.1.4.1.89.48.37 |
vlanPrivateEdgeEntryentry of pve VlanPrivateEdgeEntry .1.3.6.1.4.1.89.48.37.1 |
vlanPrivateEdgeUplinkspecify the uplink port.rw INTEGER .1.3.6.1.4.1.89.48.37.1.1 |
vlanPrivateEdgeStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.37.1.2 |
vlanDynamicVlanSupportedis DynamicVlanVlan supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.38 |
vlanDynamicVlanTabletable for DynamicVlan SEQUENCE OF VlanDynamicVlanEntry .1.3.6.1.4.1.89.48.39 |
vlanDynamicVlanEntryentry of DynamicVlan VlanDynamicVlanEntry .1.3.6.1.4.1.89.48.39.1 |
vlanDynamicVlanMacAddressmac address MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.48.39.1.1 |
vlanDynamicVlanTagvlan Tagrw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.39.1.2 |
vlanDynamicVlanStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.39.1.3 |
vlanPortModeExtTableThis table hold information on port status trunk or access SEQUENCE OF VlanPortModeExtEntry .1.3.6.1.4.1.89.48.40 |
vlanPortModeExtEntryThe row definition for this table. VlanPortModeExtEntry .1.3.6.1.4.1.89.48.40.1 |
vlanPortModeExtStateThe extrw INTEGER .1.3.6.1.4.1.89.48.40.1.1 |
vlanPortModeExtStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.40.1.2 |
vlanPrivateSupportedis private vlan supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.41 |
vlanPrivateTableOldtable for PrivateVlan SEQUENCE OF VlanPrivateEntryOld .1.3.6.1.4.1.89.48.42 |
vlanPrivateEntryOldentry of PrivateVlan VlanPrivateEntryOld .1.3.6.1.4.1.89.48.42.1 |
vlanPrivateOldIsolatedVlanTagvlan Tagrw INTEGER .1.3.6.1.4.1.89.48.42.1.1 |
vlanPrivateOldStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.42.1.2 |
vlanPrivateCommunityTabletable for PrivateVlan SEQUENCE OF VlanPrivateCommunityEntry .1.3.6.1.4.1.89.48.43 |
vlanPrivateCommunityEntryentry of PrivateVlan VlanPrivateCommunityEntry .1.3.6.1.4.1.89.48.43.1 |
vlanPrivateCommunityVlanTagvlan Tag VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.43.1.1 |
vlanPrivateCommunityStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.43.1.2 |
vlanMulticastTvTablemulticast vlan used for this port SEQUENCE OF VlanMulticastTvEntry .1.3.6.1.4.1.89.48.44 |
vlanMulticastTvEntryentry of multicast tag VlanMulticastTvEntry .1.3.6.1.4.1.89.48.44.1 |
vlanMulticastTvVIDspecify the TV vlan tag, vlan must exist .rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.44.1.1 |
vlanMulticastTvStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.44.1.2 |
vlanMacBaseVlanGroupTableA table that contains mappings from Range of MAC
addresses to Group Identifiers used for
MAC-based VLAN Classification. SEQUENCE OF VlanMacBaseVlanGroupEntry .1.3.6.1.4.1.89.48.45 |
vlanMacBaseVlanGroupEntryA mapping from a Range of MAC addresses to a
Group Identifier. VlanMacBaseVlanGroupEntry .1.3.6.1.4.1.89.48.45.1 |
vlanMacBaseVlanMacAddressThe base MAC address of the range. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.89.48.45.1.1 |
vlanMacBaseVlanMacMaskThe Mask of the range.
The mask determains the leading '1' bits of the mask (MSB).
48 means single HOST and 9 means the widest range.
The MASK is limited to 9 to avoid entring ranges including
multicast addresses. INTEGER .1.3.6.1.4.1.89.48.45.1.2 |
vlanMacBaseVlanGroupIdRepresents a group of ranges of MAC addresses
that are associated together when assigning a
VID to a frame.rw INTEGER .1.3.6.1.4.1.89.48.45.1.3 |
vlanMacBaseVlanGroupRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.45.1.4 |
vlanMacBaseVlanPortTableA table that contains VID sets used for
MAC-based VLAN Classification. SEQUENCE OF VlanMacBaseVlanPortEntry .1.3.6.1.4.1.89.48.46 |
vlanMacBaseVlanPortEntryA VID set for a port and group. VlanMacBaseVlanPortEntry .1.3.6.1.4.1.89.48.46.1 |
vlanMacBaseVlanPortGroupIdDesignates a group of Ranges in the ranges
Group Database. INTEGER .1.3.6.1.4.1.89.48.46.1.1 |
vlanMacBaseVlanPortGroupVidThe VID associated with a group of range MAC addresses for
each port.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.46.1.2 |
vlanMacBaseVlanPortRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.46.1.3 |
vlanPrivateEdgeGroupTabletable for pve port and uplink SEQUENCE OF VlanPrivateEdgeGroupEntry .1.3.6.1.4.1.89.48.47 |
vlanPrivateEdgeGroupEntryentry of pve VlanPrivateEdgeGroupEntry .1.3.6.1.4.1.89.48.47.1 |
vlanPrivateEdgeGroupSourcespecify the uplink group.ro INTEGER .1.3.6.1.4.1.89.48.47.1.1 |
vlanPrivateEdgeGroupUplinkspecify the uplink port.rw INTEGER .1.3.6.1.4.1.89.48.47.1.2 |
vlanPrivateEdgeGroupStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.47.1.3 |
vlanPrivateEdgeGroupIfIndexTabletable for pve port and uplink SEQUENCE OF VlanPrivateEdgeGroupIfIndexEntry .1.3.6.1.4.1.89.48.48 |
vlanPrivateEdgeGroupIfIndexEntryentry of pve VlanPrivateEdgeGroupIfIndexEntry .1.3.6.1.4.1.89.48.48.1 |
vlanPrivateEdgeGroupIfIndexIDspecify the ifIndex group id.ro INTEGER .1.3.6.1.4.1.89.48.48.1.1 |
vlanPrivateEdgeGroupIfIndexDomainIDspecify the ifIndex group id.ro INTEGER .1.3.6.1.4.1.89.48.48.1.2 |
vlanSubnetRangeTableA table that contains mappings from subnet
range to Group Identifiers used for
Port-and-subnet-based VLAN Classification. SEQUENCE OF VlanSubnetRangeEntry .1.3.6.1.4.1.89.48.49 |
vlanSubnetRangeEntryA mapping from a subnet to a
Group Identifier. VlanSubnetRangeEntry .1.3.6.1.4.1.89.48.49.1 |
vlanSubnetRangeAddrThe IP address of the rangero IpAddress .1.3.6.1.4.1.89.48.49.1.1 |
vlanSubnetRangeMaskThe numbers of continuous ones in the maskro INTEGER .1.3.6.1.4.1.89.48.49.1.2 |
vlanSubnetRangeGroupIdRepresents a group of subnets that are associated
together when assigning a VID to a frame.rw INTEGER .1.3.6.1.4.1.89.48.49.1.3 |
vlanSubnetRangeRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.49.1.4 |
vlanSubnetPortTableA table that contains VID sets used for
Port-and-subnet-based VLAN Classification. SEQUENCE OF VlanSubnetPortEntry .1.3.6.1.4.1.89.48.50 |
vlanSubnetPortEntryA VID set for a port. VlanSubnetPortEntry .1.3.6.1.4.1.89.48.50.1 |
vlanSubnetPortGroupIdDesignates a group of subnets in the
Group Database. INTEGER .1.3.6.1.4.1.89.48.50.1.1 |
vlanSubnetPortGroupVidThe VID associated with a group of subnets for
each port.rw INTEGER .1.3.6.1.4.1.89.48.50.1.2 |
vlanSubnetPortRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.50.1.3 |
vlanTriplePlayTableTriplePlay table, map CPE vlan to multicastTvVlan SEQUENCE OF VlanTriplePlayEntry .1.3.6.1.4.1.89.48.51 |
vlanTriplePlayEntryentry of TriplePlay table VlanTriplePlayEntry .1.3.6.1.4.1.89.48.51.1 |
vlanTriplePlayInnerVIDSpecifies the CPE inner vlan. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.51.1.1 |
vlanTriplePlayMulticastTvVIDSpecifies the multicast TV outer vlan.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.51.1.2 |
vlanTriplePlayRowStatusThe row status variable, used according to
row creation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.51.1.3 |
vlanTriplePlayMulticastTvTableTriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan SEQUENCE OF VlanTriplePlayMulticatTvEntry .1.3.6.1.4.1.89.48.52 |
vlanTriplePlayMulticatTvEntryentry of triple play MulticastTv table VlanTriplePlayMulticatTvEntry .1.3.6.1.4.1.89.48.52.1 |
vlanTriplePlayMulticastTvMulticastTvVIDSpecifies the multicast TV external vlan.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.52.1.1 |
vlanTriplePlayMulticastTvMulticastTvPortListthe multicast tv port list.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.52.1.2 |
vlanDefaultExtManagmentenable disable ext managment on default vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.53 |
vlanVoice OBJECT IDENTIFIER .1.3.6.1.4.1.89.48.54 |
vlanVoiceAgingTimeoutThe vlanVoiceAgingTimeout indicates the time (in units of
minutes) from when the last OUI MAC was ageout from the FDB the port
will be removed from the Voice VLAN.
The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours).
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw INTEGER .1.3.6.1.4.1.89.48.54.1 |
vlanVoiceTableA table containing static configuration information for
each voice VLAN configured into the device and dynamic port membership.
All entries are permanent and will
be restored after the device is reset. SEQUENCE OF VlanVoiceEntry .1.3.6.1.4.1.89.48.54.2 |
vlanVoiceEntryInformation for a voice VLAN configured into the device by management. VlanVoiceEntry .1.3.6.1.4.1.89.48.54.2.1 |
vlanVoicePriorityAn administratively assigned Priority, which will be used
for all traffic on the voice vlan, this gives the packets
the requested priority (CoS) within the bridge.rw INTEGER .1.3.6.1.4.1.89.48.54.2.1.1 |
vlanVoicePriorityRemarkRemark VPT on tagged frames egress the voice vlan according.
to priority true.falserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.54.2.1.2 |
vlanVoiceRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.54.2.1.3 |
vlanVoiceOUITableA table containing static global configuration information for Voice VLANs OUI MAC Prefixes.
All entries are permanent and will be restored after the device is reset. SEQUENCE OF VlanVoiceOUIEntry .1.3.6.1.4.1.89.48.54.3 |
vlanVoiceOUIEntryInformation for a voice VLANs OUI MAC Prefixes configured into the
device by management. VlanVoiceOUIEntry .1.3.6.1.4.1.89.48.54.3.1 |
vlanVoiceOUIPrefixThe index value used to identify the OUI MAC Prefix component
associated with this entry.
The value of this object is used as an index to the
vlanVoiceOUITable.
Voice VLANs OUI Prefix is the first 3 most significant
octets of the MAC address. OCTET STRING .1.3.6.1.4.1.89.48.54.3.1.1 |
vlanVoiceOUIDescriptionAn optional text that describes the OUI.rw DisplayString .1.3.6.1.4.1.89.48.54.3.1.2 |
vlanVoiceOUIEntryRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.54.3.1.3 |
vlanVoicePortTableA table containing static and dynamic per port configuration information for Voice VLAN.
All entries are permanent and will be restored after the device is reset. SEQUENCE OF VlanVoicePortEntry .1.3.6.1.4.1.89.48.54.4 |
vlanVoicePortEntryStatic and dynamic per port information for a voice VLAN. VlanVoicePortEntry .1.3.6.1.4.1.89.48.54.4.1 |
vlanVoicePortEnableEnable this port to be a candidate to be added into the Voice VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.54.4.1.1 |
vlanVoicePortVlanIndexThe Voice VLAN-ID the port is a candidate to be in.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.54.4.1.2 |
vlanVoicePortSecureSpecify this port to be in Secure Mode when entering the Voice VLAN.
In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes
are accepted, otherwise dropped.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.54.4.1.3 |
vlanVoicePortCurrentMembershipPort's current status of membership in Voice VLAN.
Port's possible values of membership in Voice VLAN:
'Active(1)' - Port is currently added to a Voice VLAN .
'NotActive(2)' - Specifies either that port is a candidate to be
in Voice VLAN or disabled.ro Enumeration .1.3.6.1.4.1.89.48.54.4.1.4 |
vlanVoicePortQosModePort's current QOS mode in Voice VLAN.
Possible values:
'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan.
'all(2)' - All traffic through that port received QOS of the Voice Vlan.rw Enumeration .1.3.6.1.4.1.89.48.54.4.1.5 |
vlanVoiceOUISetToDefaultThe vlanVoiceOUISetToDefault indicates that vlanVoiceOUITable
should be set to it's default values if existed
(OUI default prefixes).
To do so the vlanVoiceOUITable should be previuosly deleted by usual
entries destroying.
This object behaviors as write-only than
reading this object will always return 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.54.5 |
vlanDefault OBJECT IDENTIFIER .1.3.6.1.4.1.89.48.55 |
vlanDefaultTaggedPortslist of default valn tagged ports.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.55.1 |
vlanDefaultEnabledPortsList of default VLAN membership enabled ports.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.55.2 |
vlanInetTriplePlayTableTriplePlay table, map CPE vlan to multicastTvVlan SEQUENCE OF VlanInetTriplePlayEntry .1.3.6.1.4.1.89.48.56 |
vlanInetTriplePlayEntryentry of TriplePlay table VlanInetTriplePlayEntry .1.3.6.1.4.1.89.48.56.1 |
vlanInetTriplePlayInetAddressTypeInet type IPv4/IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.48.56.1.1 |
vlanInetTriplePlayInnerVIDSpecifies the CPE inner vlan. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.56.1.2 |
vlanInetTriplePlayMulticastTvVIDSpecifies the multicast TV outer vlan.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.56.1.3 |
vlanInetTriplePlayRowStatusThe row status variable, used according to
row creation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.56.1.4 |
vlanInetTriplePlayMulticastTvTableTriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan SEQUENCE OF VlanInetTriplePlayMulticatTvEntry .1.3.6.1.4.1.89.48.57 |
vlanInetTriplePlayMulticatTvEntryentry of triple play MulticastTv table VlanInetTriplePlayMulticatTvEntry .1.3.6.1.4.1.89.48.57.1 |
vlanInetTriplePlayMulticastTvMulticastTvVIDSpecifies the multicast TV external vlan.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.57.1.1 |
vlanInetTriplePlayMulticastTvMulticastTvPortListthe multicast tv port list.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.57.1.2 |
vlanAsymmetricEnabledIndicates enabled or disabled of Asymetric Vlanrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.48.58 |
vlanPrivateTablePrivate vlan table which contains the private vlan entries. SEQUENCE OF VlanPrivateEntry .1.3.6.1.4.1.89.48.59 |
vlanPrivateEntryPrivate vlan entry which contains the private vlan definition. VlanPrivateEntry .1.3.6.1.4.1.89.48.59.1 |
vlanPrivateVidThe static vlan ID which is set to one of the
private vlan types. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.59.1.1 |
vlanPrivateTypeprivate vlan types:
primary - Carries traffic from promiscuous ports.
promiscuous port can communicate with all ports of the
same PVLAN, including the isolated and community
ports of the same PVLAN.
isolated - Carries traffic from isolated ports.
isolated ports can communicate only with the
promiscuous ports of the same PVLAN.
community - Carries traffic from community ports.
community ports of the same community can communicate
among themselves and with the promiscuous ports of the
same PVLAN.rw Enumeration .1.3.6.1.4.1.89.48.59.1.2 |
vlanPrivatePrimaryVidThe primary vlan ID which has defined in VlanPrivateEntry and which is
associated with secondary vlan (in vlanPrivateMapTable).
vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is
primary vlan.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.59.1.3 |
vlanPrivateStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.59.1.4 |
vlanPrivateMapTablePrivate vlan mapping table which contains the private vlan mapping entries. SEQUENCE OF VlanPrivateMapEntry .1.3.6.1.4.1.89.48.60 |
vlanPrivateMapEntryPrivate vlan mapping entry which contains the primary / secondary
private vlan association and their ports membership. VlanPrivateMapEntry .1.3.6.1.4.1.89.48.60.1 |
vlanPrivateMapPrimaryVidThe primary private vlan ID which is associated with the secondary
(isolated or community) vlan (vlanPrivateMapSecondaryVid). VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.60.1.1 |
vlanPrivateMapSecondaryVidThe secondary private vlan ID which is associated with the primary
vlan (vlanPrivateMapPrimaryVid). VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.60.1.2 |
vlanPrivateMapPrimaryPortsThe private vlan promiscuous ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.60.1.3 |
vlanPrivateMapSecondaryPortsThe private vlan host ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.60.1.4 |
vlanPrivateMapPrimaryOperPortsThe private vlan active promiscuous ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.60.1.5 |
vlanPrivateMapSecondaryOperPortsThe private vlan active host ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.60.1.6 |
vlanPrivateMapStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.60.1.7 |
vlanTrunkPortModeTableThe tables contains trunk mode port entries. SEQUENCE OF VlanTrunkPortModeEntry .1.3.6.1.4.1.89.48.61 |
vlanTrunkPortModeEntryThe entry contains port ifIndex,native vlan id and vlan list the port has a membership.
The vlan list can contain not created vlans. VlanTrunkPortModeEntry .1.3.6.1.4.1.89.48.61.1 |
vlanTrunkPortModeNativeVlanIdIndicated native vlan index.Default value 0rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.61.1.1 |
vlanTrunkModeList1to1024vlan trunk mode list 1. Default value is {0}rw VlanList1 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.61.1.2 |
vlanTrunkModeList1025to2048vlan trunk mode list 2. Default value is {0}rw VlanList2 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.61.1.3 |
vlanTrunkModeList2049to3072vlan trunk mode list 3. Default value is {0}rw VlanList3 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.61.1.4 |
vlanTrunkModeList3073to4094vlan trunk mode list 4. Default value is {0}rw VlanList4 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.61.1.5 |
vlanAccessPortModeTableThe tables contains access mode port entries. SEQUENCE OF VlanAccessPortModeEntry .1.3.6.1.4.1.89.48.62 |
vlanAccessPortModeEntryThe entry contains port ifIndex,access vlan id and multicast TV vlan id. VlanAccessPortModeEntry .1.3.6.1.4.1.89.48.62.1 |
vlanAccessPortModeVlanIdIndicated access vlan id.Default value is 0rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.62.1.1 |
vlanAccessPortModeMcstTvVlanIdIndicated multicast TV vlan id.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.62.1.2 |
vlanCustomerPortModeTableThe tables contains customer mode port entries. SEQUENCE OF VlanCustomerPortModeEntry .1.3.6.1.4.1.89.48.63 |
vlanCustomerPortModeEntryThe entry contains port ifIndex,customer vlan id and customer multicast TV vlan id. VlanCustomerPortModeEntry .1.3.6.1.4.1.89.48.63.1 |
vlanCustomerPortModeVlanIdIndicated customer vlan id.Default value is 0rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.63.1.1 |
vlanCustomerPortModeMtvList1to1024vlan customer port mode multicast TV list 1. Default value is {0}ro VlanList1 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.63.1.2 |
vlanCustomerPortModeMtvList1025to2048vlan customer port mode multicast TV list 2. Default value is {0}ro VlanList2 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.63.1.3 |
vlanCustomerPortModeMtvList2049to3072vlan customer port mode multicast TV list 3. Default value is {0}ro VlanList3 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.63.1.4 |
vlanCustomerPortModeMtvList3073to4094vlan customer port mode multicast TV list 4. Default value is {0}ro VlanList4 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.63.1.5 |
vlanSwitchPortModeTableThe table defines L3/L2 port context. SEQUENCE OF VlanSwitchPortModeEntry .1.3.6.1.4.1.89.48.64 |
vlanSwitchPortModeEntryThe entry contains port ifIndex and switch port enable value. VlanSwitchPortModeEntry .1.3.6.1.4.1.89.48.64.1 |
vlanSwitchPortModeCategoryIndicated if a port is switchport (l2 port) or no switchport (l3 port)
1 - switchport
2 - no switchport. Default is 1rw Enumeration .1.3.6.1.4.1.89.48.64.1.1 |
vlanPortModeContextTableThe tables contains current port mode context entries. SEQUENCE OF VlanPortModeContextEntry .1.3.6.1.4.1.89.48.65 |
vlanPortModeContextEntryThe entry contains current port mode context. VlanPortModeContextEntry .1.3.6.1.4.1.89.48.65.1 |
vlanPortModeContextValueIndicated port context value:
0. Lag
1. Monitor
2. L3
3. RAVA
4. Dot1x
5. Dot1q
6. Access
7. Trunk
8. Customer
9. PV_promisc
10. PV_hostrw INTEGER .1.3.6.1.4.1.89.48.65.1.1 |
vlanRsvlEnableEnable / Disable Shared Vlans at the device.rw Enumeration .1.3.6.1.4.1.89.48.66 |
vlanRsvlMapTableShared vlan learning mapping table which contains the SVL mapping entries. SEQUENCE OF VlanRsvlMapEntry .1.3.6.1.4.1.89.48.67 |
vlanRsvlMapEntrySVL mapping entry which contains the primary / secondary
SVL association. VlanRsvlMapEntry .1.3.6.1.4.1.89.48.67.1 |
vlanRsvlMapPrimaryVidThe primary SVL ID which is associated with the secondary
shared vlan vlanRsvlMapSecondaryVid. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.67.1.1 |
vlanRsvlMapSecondaryVidThe secondary SVL ID which is associated with the primary
shared vlan vlanRsvlMapPrimaryVid. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.48.67.1.2 |
vlanRsvlMapStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.48.67.1.3 |
rldot1qPortVlanStaticTableA table containing static vlan port membership information. SEQUENCE OF Rldot1qPortVlanStaticEntry .1.3.6.1.4.1.89.48.68 |
rldot1qPortVlanStaticEntryStatic vlan membership information per port Rldot1qPortVlanStaticEntry .1.3.6.1.4.1.89.48.68.1 |
rldot1qPortVlanStaticEgressList1to1024The port egress vlan static list.Default value is {0}rw VlanList1 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.1 |
rldot1qPortVlanStaticEgressList1025to2048The port egress vlan static list.Default value is {0}rw VlanList2 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.2 |
rldot1qPortVlanStaticEgressList2049to3072The port egress vlan static list.Default value is {0}rw VlanList3 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.3 |
rldot1qPortVlanStaticEgressList3073to4094The port egress vlan static list.Default value is {0}rw VlanList4 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.4 |
rldot1qPortVlanStaticUntaggedEgressList1to1024The port egress untagged vlan static list.Default value is {0}rw VlanList1 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.5 |
rldot1qPortVlanStaticUntaggedEgressList1025to2048The port egress untagged vlan static list.Default value is {0}rw VlanList2 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.6 |
rldot1qPortVlanStaticUntaggedEgressList2049to3072The port egress untagged vlan static list.Default value is {0}rw VlanList3 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.7 |
rldot1qPortVlanStaticUntaggedEgressList3073to4094The port egress untagged vlan static list.Default value is {0}rw VlanList4 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.8 |
rldot1qPortVlanStaticForbiddenList1to1024The port forbidden vlan static list.Default value is {0}rw VlanList1 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.9 |
rldot1qPortVlanStaticForbiddenList1025to2048The port forbidden vlan static list.Default value is {0}rw VlanList2 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.10 |
rldot1qPortVlanStaticForbiddenList2049to3072The port forbidden vlan static list.Default value is {0}rw VlanList3 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.11 |
rldot1qPortVlanStaticForbiddenList3073to4094The port forbidden vlan static list.Default value is {0}rw VlanList4 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.68.1.12 |
rldot1qVlanStaticListTableA table contains only one entry of a static vlan list. SEQUENCE OF Rldot1qVlanStaticListEntry .1.3.6.1.4.1.89.48.69 |
rldot1qVlanStaticListEntryStaticly created by local or network management vlan list Rldot1qVlanStaticListEntry .1.3.6.1.4.1.89.48.69.1 |
rldot1qVlanStaticListIndexAn index is entrie's sequence.
This field substitutes a vlan type.
If the vlan was created by user configuration then
the type is static.
If the vlan was created by GVRP/MVRP protocols then the type is dynamicGvrp.
If the vlan was created by Radius server attribute assignment mechanism then
the type is dynamicRava.rw Enumeration .1.3.6.1.4.1.89.48.69.1.1 |
rldot1qVlanStaticList1to1024A list of staticaly created vlans from 1 to 1024.rw VlanList1 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.69.1.2 |
rldot1qVlanStaticList1025to2048A list of according to the type field created vlans from 1025 to 2048.rw VlanList2 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.69.1.3 |
rldot1qVlanStaticList2049to3072A list of according to the type field created vlans from 2049 to 3072.rw VlanList3 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.69.1.4 |
rldot1qVlanStaticList3073to4094A list of according to the type field created vlans from 3073 to 4094.rw VlanList4 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.69.1.5 |
rldot1qVlanStaticNameTableA table contains created by user vlans names. SEQUENCE OF Rldot1qVlanStaticNameEntry .1.3.6.1.4.1.89.48.70 |
rldot1qVlanStaticNameEntryStaticly created by local or network management vlan list Rldot1qVlanStaticNameEntry .1.3.6.1.4.1.89.48.70.1 |
rldot1qVlanStaticNameAn administratively assigned string,which may be used
to identify the VLAN. The VLAN name must be unique or no name.rw SnmpAdminString .1.3.6.1.4.1.89.48.70.1.1 |
rlPortVlanTriplePlayMulticastTvTableA table saves a list of vlans per port/lag. SEQUENCE OF RlPortVlanTriplePlayMulticastTvEntry .1.3.6.1.4.1.89.48.71 |
rlPortVlanTriplePlayMulticastTvEntryEntry of Triple Play Multicast Tv table. RlPortVlanTriplePlayMulticastTvEntry .1.3.6.1.4.1.89.48.71.1 |
rlPortVlanTriplePlayMulticastTvList1to1024A list of staticaly created Triple Play MTV vlans from 1 to 1024.rw VlanList1 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.71.1.1 |
rlPortVlanTriplePlayMulticastTvList1025to2048A list of staticaly created Triple Play MTV vlans from 1025 to 2048.rw VlanList2 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.71.1.2 |
rlPortVlanTriplePlayMulticastTvList2049to3072A list of staticaly created Triple Play MTV vlans from 2049 to 3072.rw VlanList3 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.71.1.3 |
rlPortVlanTriplePlayMulticastTvList3073to4094A list of staticaly created Triple Play MTV vlans from 3073 to 4094.rw VlanList4 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.48.71.1.4 |
rldot1qVlanMembershipTypeTableA table contains a bitmap of the VLAN owners(applications) that can create the VLAN and/or add a port to the VLAN. SEQUENCE OF Rldot1qVlanMembershipTypeEntry .1.3.6.1.4.1.89.48.72 |
rldot1qVlanMembershipTypeEntryStaticly or dynamicly created VLAN ID owner entry Rldot1qVlanMembershipTypeEntry .1.3.6.1.4.1.89.48.72.1 |
rldot1qVlanMembershipTypeBitmapThis field contains a bitmap of owners that can creates and/or add a port
to the VLAN.
There exist three such type of owners :
Default VLAN
Manual created VLAN
Dynamic(RAVA)created VLAN
GVRP(MVRP)created VLANro INTEGER .1.3.6.1.4.1.89.48.72.1.1 |